Pull changes from u-boot mainline to support new Elpida PoP memory.
NB: AP dev board 1.0 does not have the board revision GPIOs that the
Pandaboard has, so automatic switching has been removed for now. AP
dev board 2.0 will be compatible with Pandaboard ES B3.
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 30dcf1b..92a2dcf 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1203,7 +1203,7 @@
writel(lisa_map_regs->dmm_lisa_map_0,
&hw_lisa_map_regs->dmm_lisa_map_0);
- if (omap_revision() >= OMAP4460_ES1_0) {
+ if (lisa_map_regs->is_ma_present) {
hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)MA_BASE;
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index 2c34e48..9ee792e 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -157,6 +157,9 @@
break;
case MIDR_CORTEX_A9_R2P10:
switch (readl(CONTROL_ID_CODE)) {
+ case OMAP4470_CONTROL_ID_CODE_ES1_0:
+ *omap_si_rev = OMAP4470_ES1_0;
+ break;
case OMAP4460_CONTROL_ID_CODE_ES1_1:
*omap_si_rev = OMAP4460_ES1_1;
break;
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index b9128fa..ceafef6 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -48,7 +48,7 @@
#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-static const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
+const struct emif_regs emif_regs_elpida_200_mhz_2cs = {
.sdram_config_init = 0x80000eb9,
.sdram_config = 0x80001ab9,
.ref_ctrl = 0x0000030c,
@@ -62,7 +62,7 @@
.emif_ddr_phy_ctlr_1 = 0x049ff808
};
-static const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
+const struct emif_regs emif_regs_elpida_380_mhz_1cs = {
.sdram_config_init = 0x80000eb1,
.sdram_config = 0x80001ab1,
.ref_ctrl = 0x000005cd,
@@ -76,6 +76,20 @@
.emif_ddr_phy_ctlr_1 = 0x049ff418
};
+const struct emif_regs emif_regs_elpida_400_mhz_1cs = {
+ .sdram_config_init = 0x80800eb2,
+ .sdram_config = 0x80801ab2,
+ .ref_ctrl = 0x00000618,
+ .sdram_tim1 = 0x10eb0662,
+ .sdram_tim2 = 0x20370dd2,
+ .sdram_tim3 = 0x00b1c33f,
+ .read_idle_ctrl = 0x000501ff,
+ .zq_config = 0x500b3215,
+ .temp_alert_config = 0x58016893,
+ .emif_ddr_phy_ctlr_1_init = 0x049ffff5,
+ .emif_ddr_phy_ctlr_1 = 0x049ff418
+};
+
const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
.sdram_config_init = 0x80000eb9,
.sdram_config = 0x80001ab9,
@@ -97,14 +111,24 @@
.dmm_lisa_map_0 = 0xFF020100,
.dmm_lisa_map_1 = 0,
.dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80540300
+ .dmm_lisa_map_3 = 0x80540300,
+ .is_ma_present = 0x0
};
const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
.dmm_lisa_map_0 = 0xFF020100,
.dmm_lisa_map_1 = 0,
.dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80640300
+ .dmm_lisa_map_3 = 0x80640300,
+ .is_ma_present = 0x0
+};
+
+const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80640300,
+ .is_ma_present = 0x1
};
static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
@@ -116,8 +140,12 @@
*regs = &emif_regs_elpida_380_mhz_1cs;
else if (omap4_rev == OMAP4430_ES2_0)
*regs = &emif_regs_elpida_200_mhz_2cs;
- else
+ else if (omap4_rev == OMAP4430_ES2_3)
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else if (omap4_rev < OMAP4470_ES1_0)
*regs = &emif_regs_elpida_400_mhz_2cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_1cs;
}
void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
__attribute__((weak, alias("emif_get_reg_dump_sdp")));
@@ -129,8 +157,12 @@
if (omap_rev == OMAP4430_ES1_0)
*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
- else
+ else if (omap_rev == OMAP4430_ES2_3)
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+ else if (omap_rev < OMAP4460_ES1_0)
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+ else
+ *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
}
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
@@ -145,20 +177,31 @@
.manufacturer = LPDDR2_MANUFACTURER_ELPIDA
};
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+ .type = LPDDR2_TYPE_S4,
+ .density = LPDDR2_DENSITY_4Gb,
+ .io_width = LPDDR2_IO_WIDTH_32,
+ .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
+};
+
struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs,
struct lpddr2_device_details *lpddr2_dev_details)
{
u32 omap_rev = omap_revision();
/* EMIF1 & EMIF2 have identical configuration */
- if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) {
- /* Nothing connected on CS1 for ES1.0 */
+ if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
+ && (cs == CS1)) {
+ /* Nothing connected on CS1 for 4430/4470 ES1.0 */
return NULL;
- } else {
- /* In all other cases Elpida 2G device */
+ } else if (omap_rev < OMAP4470_ES1_0) {
+ /* In all other 4430/4460 cases Elpida 2G device */
*lpddr2_dev_details = elpida_2G_S4_details;
- return lpddr2_dev_details;
+ } else {
+ /* 4470: 4G device */
+ *lpddr2_dev_details = elpida_4G_S4_details;
}
+ return lpddr2_dev_details;
}
struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
@@ -272,7 +315,7 @@
/* Identical devices on EMIF1 & EMIF2 */
*cs0_device_timings = &elpida_2G_S4_timings;
- if (omap_rev == OMAP4430_ES1_0)
+ if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0))
*cs1_device_timings = NULL;
else
*cs1_device_timings = &elpida_2G_S4_timings;
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6ebdf5f..e9f0106 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -113,7 +113,8 @@
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
.dmm_lisa_map_2 = 0x80740300,
- .dmm_lisa_map_3 = 0xFF020100
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
};
const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index a7e97eb..cb09699 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -65,6 +65,7 @@
#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F
#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F
+#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F
/* UART */
#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 77f2cf7..f76c519 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -27,6 +27,10 @@
#include <asm/omap_common.h>
#include <asm/arch/mux_omap4.h>
+extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
+extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
+extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
struct omap_sysinfo {
char *board_string;
};
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index ed251ec..10f532a 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -696,6 +696,7 @@
u32 dmm_lisa_map_1;
u32 dmm_lisa_map_2;
u32 dmm_lisa_map_3;
+ u8 is_ma_present;
};
extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 2a40b89..e701c98 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -55,6 +55,7 @@
#define OMAP4430_ES2_3 0x44300230
#define OMAP4460_ES1_0 0x44600100
#define OMAP4460_ES1_1 0x44600110
+#define OMAP4470_ES1_0 0x44700100
/* omap5 */
#define OMAP5430_SILICON_ID_INVALID 0
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 20be81c..c23fd67 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -86,6 +86,53 @@
}
/**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+ return 1;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ u32 omap4_rev = omap_revision();
+
+ /* Same devices and geometry on both EMIFs */
+ if (omap4_rev == OMAP4430_ES1_0)
+ *regs = &emif_regs_elpida_380_mhz_1cs;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ *regs = &emif_regs_elpida_200_mhz_2cs;
+ else if (omap4_rev == OMAP4430_ES2_3)
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else if (omap4_rev < OMAP4470_ES1_0) {
+ if(is_panda_es_rev_b3())
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_2cs;
+ }
+ else
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
+/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
@@ -101,6 +148,10 @@
if (omap_revision() == OMAP4430_ES1_0)
return 0;
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-moto"));
+#endif
+
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
