| /* |
| * |
| * bttv - Bt848 frame grabber driver |
| * |
| * card ID's and external interfaces of the bttv driver |
| * basically stuff needed by other drivers (i2c, lirc, ...) |
| * and is supported not to change much over time. |
| * |
| * Copyright (C) 1996,97 Ralph Metzler (rjkm@thp.uni-koeln.de) |
| * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de> |
| * |
| */ |
| |
| #ifndef _BTTV_H_ |
| #define _BTTV_H_ |
| |
| #include <linux/videodev2.h> |
| #include <linux/i2c.h> |
| #include <media/v4l2-device.h> |
| #include <media/i2c-addr.h> |
| #include <media/tuner.h> |
| |
| /* ---------------------------------------------------------- */ |
| /* exported by bttv-cards.c */ |
| |
| #define BTTV_BOARD_UNKNOWN 0x00 |
| #define BTTV_BOARD_MIRO 0x01 |
| #define BTTV_BOARD_HAUPPAUGE 0x02 |
| #define BTTV_BOARD_STB 0x03 |
| #define BTTV_BOARD_INTEL 0x04 |
| #define BTTV_BOARD_DIAMOND 0x05 |
| #define BTTV_BOARD_AVERMEDIA 0x06 |
| #define BTTV_BOARD_MATRIX_VISION 0x07 |
| #define BTTV_BOARD_FLYVIDEO 0x08 |
| #define BTTV_BOARD_TURBOTV 0x09 |
| #define BTTV_BOARD_HAUPPAUGE878 0x0a |
| #define BTTV_BOARD_MIROPRO 0x0b |
| #define BTTV_BOARD_ADSTECH_TV 0x0c |
| #define BTTV_BOARD_AVERMEDIA98 0x0d |
| #define BTTV_BOARD_VHX 0x0e |
| #define BTTV_BOARD_ZOLTRIX 0x0f |
| #define BTTV_BOARD_PIXVIEWPLAYTV 0x10 |
| #define BTTV_BOARD_WINVIEW_601 0x11 |
| #define BTTV_BOARD_AVEC_INTERCAP 0x12 |
| #define BTTV_BOARD_LIFE_FLYKIT 0x13 |
| #define BTTV_BOARD_CEI_RAFFLES 0x14 |
| #define BTTV_BOARD_CONFERENCETV 0x15 |
| #define BTTV_BOARD_PHOEBE_TVMAS 0x16 |
| #define BTTV_BOARD_MODTEC_205 0x17 |
| #define BTTV_BOARD_MAGICTVIEW061 0x18 |
| #define BTTV_BOARD_VOBIS_BOOSTAR 0x19 |
| #define BTTV_BOARD_HAUPPAUG_WCAM 0x1a |
| #define BTTV_BOARD_MAXI 0x1b |
| #define BTTV_BOARD_TERRATV 0x1c |
| #define BTTV_BOARD_PXC200 0x1d |
| #define BTTV_BOARD_FLYVIDEO_98 0x1e |
| #define BTTV_BOARD_IPROTV 0x1f |
| #define BTTV_BOARD_INTEL_C_S_PCI 0x20 |
| #define BTTV_BOARD_TERRATVALUE 0x21 |
| #define BTTV_BOARD_WINFAST2000 0x22 |
| #define BTTV_BOARD_CHRONOS_VS2 0x23 |
| #define BTTV_BOARD_TYPHOON_TVIEW 0x24 |
| #define BTTV_BOARD_PXELVWPLTVPRO 0x25 |
| #define BTTV_BOARD_MAGICTVIEW063 0x26 |
| #define BTTV_BOARD_PINNACLE 0x27 |
| #define BTTV_BOARD_STB2 0x28 |
| #define BTTV_BOARD_AVPHONE98 0x29 |
| #define BTTV_BOARD_PV951 0x2a |
| #define BTTV_BOARD_ONAIR_TV 0x2b |
| #define BTTV_BOARD_SIGMA_TVII_FM 0x2c |
| #define BTTV_BOARD_MATRIX_VISION2 0x2d |
| #define BTTV_BOARD_ZOLTRIX_GENIE 0x2e |
| #define BTTV_BOARD_TERRATVRADIO 0x2f |
| #define BTTV_BOARD_DYNALINK 0x30 |
| #define BTTV_BOARD_GVBCTV3PCI 0x31 |
| #define BTTV_BOARD_PXELVWPLTVPAK 0x32 |
| #define BTTV_BOARD_EAGLE 0x33 |
| #define BTTV_BOARD_PINNACLEPRO 0x34 |
| #define BTTV_BOARD_TVIEW_RDS_FM 0x35 |
| #define BTTV_BOARD_LIFETEC_9415 0x36 |
| #define BTTV_BOARD_BESTBUY_EASYTV 0x37 |
| #define BTTV_BOARD_FLYVIDEO_98FM 0x38 |
| #define BTTV_BOARD_GRANDTEC 0x39 |
| #define BTTV_BOARD_ASKEY_CPH060 0x3a |
| #define BTTV_BOARD_ASKEY_CPH03X 0x3b |
| #define BTTV_BOARD_MM100PCTV 0x3c |
| #define BTTV_BOARD_GMV1 0x3d |
| #define BTTV_BOARD_BESTBUY_EASYTV2 0x3e |
| #define BTTV_BOARD_ATI_TVWONDER 0x3f |
| #define BTTV_BOARD_ATI_TVWONDERVE 0x40 |
| #define BTTV_BOARD_FLYVIDEO2000 0x41 |
| #define BTTV_BOARD_TERRATVALUER 0x42 |
| #define BTTV_BOARD_GVBCTV4PCI 0x43 |
| #define BTTV_BOARD_VOODOOTV_FM 0x44 |
| #define BTTV_BOARD_AIMMS 0x45 |
| #define BTTV_BOARD_PV_BT878P_PLUS 0x46 |
| #define BTTV_BOARD_FLYVIDEO98EZ 0x47 |
| #define BTTV_BOARD_PV_BT878P_9B 0x48 |
| #define BTTV_BOARD_SENSORAY311 0x49 |
| #define BTTV_BOARD_RV605 0x4a |
| #define BTTV_BOARD_POWERCLR_MTV878 0x4b |
| #define BTTV_BOARD_WINDVR 0x4c |
| #define BTTV_BOARD_GRANDTEC_MULTI 0x4d |
| #define BTTV_BOARD_KWORLD 0x4e |
| #define BTTV_BOARD_DSP_TCVIDEO 0x4f |
| #define BTTV_BOARD_HAUPPAUGEPVR 0x50 |
| #define BTTV_BOARD_GVBCTV5PCI 0x51 |
| #define BTTV_BOARD_OSPREY1x0 0x52 |
| #define BTTV_BOARD_OSPREY1x0_848 0x53 |
| #define BTTV_BOARD_OSPREY101_848 0x54 |
| #define BTTV_BOARD_OSPREY1x1 0x55 |
| #define BTTV_BOARD_OSPREY1x1_SVID 0x56 |
| #define BTTV_BOARD_OSPREY2xx 0x57 |
| #define BTTV_BOARD_OSPREY2x0_SVID 0x58 |
| #define BTTV_BOARD_OSPREY2x0 0x59 |
| #define BTTV_BOARD_OSPREY500 0x5a |
| #define BTTV_BOARD_OSPREY540 0x5b |
| #define BTTV_BOARD_OSPREY2000 0x5c |
| #define BTTV_BOARD_IDS_EAGLE 0x5d |
| #define BTTV_BOARD_PINNACLESAT 0x5e |
| #define BTTV_BOARD_FORMAC_PROTV 0x5f |
| #define BTTV_BOARD_MACHTV 0x60 |
| #define BTTV_BOARD_EURESYS_PICOLO 0x61 |
| #define BTTV_BOARD_PV150 0x62 |
| #define BTTV_BOARD_AD_TVK503 0x63 |
| #define BTTV_BOARD_HERCULES_SM_TV 0x64 |
| #define BTTV_BOARD_PACETV 0x65 |
| #define BTTV_BOARD_IVC200 0x66 |
| #define BTTV_BOARD_XGUARD 0x67 |
| #define BTTV_BOARD_NEBULA_DIGITV 0x68 |
| #define BTTV_BOARD_PV143 0x69 |
| #define BTTV_BOARD_VD009X1_VD011_MINIDIN 0x6a |
| #define BTTV_BOARD_VD009X1_VD011_COMBI 0x6b |
| #define BTTV_BOARD_VD009_MINIDIN 0x6c |
| #define BTTV_BOARD_VD009_COMBI 0x6d |
| #define BTTV_BOARD_IVC100 0x6e |
| #define BTTV_BOARD_IVC120 0x6f |
| #define BTTV_BOARD_PC_HDTV 0x70 |
| #define BTTV_BOARD_TWINHAN_DST 0x71 |
| #define BTTV_BOARD_WINFASTVC100 0x72 |
| #define BTTV_BOARD_TEV560 0x73 |
| #define BTTV_BOARD_SIMUS_GVC1100 0x74 |
| #define BTTV_BOARD_NGSTV_PLUS 0x75 |
| #define BTTV_BOARD_LMLBT4 0x76 |
| #define BTTV_BOARD_TEKRAM_M205 0x77 |
| #define BTTV_BOARD_CONTVFMI 0x78 |
| #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 |
| #define BTTV_BOARD_SPIRIT_TV 0x7a |
| #define BTTV_BOARD_AVDVBT_771 0x7b |
| #define BTTV_BOARD_AVDVBT_761 0x7c |
| #define BTTV_BOARD_MATRIX_VISIONSQ 0x7d |
| #define BTTV_BOARD_MATRIX_VISIONSLC 0x7e |
| #define BTTV_BOARD_APAC_VIEWCOMP 0x7f |
| #define BTTV_BOARD_DVICO_DVBT_LITE 0x80 |
| #define BTTV_BOARD_VGEAR_MYVCD 0x81 |
| #define BTTV_BOARD_SUPER_TV 0x82 |
| #define BTTV_BOARD_TIBET_CS16 0x83 |
| #define BTTV_BOARD_KODICOM_4400R 0x84 |
| #define BTTV_BOARD_KODICOM_4400R_SL 0x85 |
| #define BTTV_BOARD_ADLINK_RTV24 0x86 |
| #define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87 |
| #define BTTV_BOARD_ACORP_Y878F 0x88 |
| #define BTTV_BOARD_CONCEPTRONIC_CTVFMI2 0x89 |
| #define BTTV_BOARD_PV_BT878P_2E 0x8a |
| #define BTTV_BOARD_PV_M4900 0x8b |
| #define BTTV_BOARD_OSPREY440 0x8c |
| #define BTTV_BOARD_ASOUND_SKYEYE 0x8d |
| #define BTTV_BOARD_SABRENT_TVFM 0x8e |
| #define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f |
| #define BTTV_BOARD_MACHTV_MAGICTV 0x90 |
| #define BTTV_BOARD_SSAI_SECURITY 0x91 |
| #define BTTV_BOARD_SSAI_ULTRASOUND 0x92 |
| #define BTTV_BOARD_VOODOOTV_200 0x93 |
| #define BTTV_BOARD_DVICO_FUSIONHDTV_2 0x94 |
| #define BTTV_BOARD_TYPHOON_TVTUNERPCI 0x95 |
| #define BTTV_BOARD_GEOVISION_GV600 0x96 |
| #define BTTV_BOARD_KOZUMI_KTV_01C 0x97 |
| #define BTTV_BOARD_ENLTV_FM_2 0x98 |
| #define BTTV_BOARD_VD012 0x99 |
| #define BTTV_BOARD_VD012_X1 0x9a |
| #define BTTV_BOARD_VD012_X2 0x9b |
| #define BTTV_BOARD_IVCE8784 0x9c |
| #define BTTV_BOARD_GEOVISION_GV800S 0x9d |
| #define BTTV_BOARD_GEOVISION_GV800S_SL 0x9e |
| #define BTTV_BOARD_PV183 0x9f |
| |
| |
| /* more card-specific defines */ |
| #define PT2254_L_CHANNEL 0x10 |
| #define PT2254_R_CHANNEL 0x08 |
| #define PT2254_DBS_IN_2 0x400 |
| #define PT2254_DBS_IN_10 0x20000 |
| #define WINVIEW_PT2254_CLK 0x40 |
| #define WINVIEW_PT2254_DATA 0x20 |
| #define WINVIEW_PT2254_STROBE 0x80 |
| |
| struct bttv_core { |
| /* device structs */ |
| struct v4l2_device v4l2_dev; |
| struct pci_dev *pci; |
| struct i2c_adapter i2c_adap; |
| struct list_head subs; /* struct bttv_sub_device */ |
| |
| /* device config */ |
| unsigned int nr; /* dev nr (for printk("bttv%d: ..."); */ |
| unsigned int type; /* card type (pointer into tvcards[]) */ |
| }; |
| |
| struct bttv; |
| |
| struct tvcard { |
| char *name; |
| void (*volume_gpio)(struct bttv *btv, __u16 volume); |
| void (*audio_mode_gpio)(struct bttv *btv, struct v4l2_tuner *tuner, int set); |
| void (*muxsel_hook)(struct bttv *btv, unsigned int input); |
| |
| /* MUX bits for each input, two bits per input starting with the LSB */ |
| u32 muxsel; /* Use MUXSEL() to set */ |
| |
| u32 gpiomask; |
| u32 gpiomux[4]; /* Tuner, Radio, external, internal */ |
| u32 gpiomute; /* GPIO mute setting */ |
| u32 gpiomask2; /* GPIO MUX mask */ |
| |
| unsigned int tuner_type; |
| u8 tuner_addr; |
| u8 video_inputs; /* Number of inputs */ |
| unsigned int svhs:4; /* Which input is s-video */ |
| #define NO_SVHS 15 |
| unsigned int pll:2; |
| #define PLL_NONE 0 |
| #define PLL_28 1 |
| #define PLL_35 2 |
| |
| /* i2c audio flags */ |
| unsigned int no_msp34xx:1; |
| unsigned int no_tda7432:1; |
| unsigned int needs_tvaudio:1; |
| unsigned int msp34xx_alt:1; |
| /* Note: currently no card definition needs to mark the presence |
| of a RDS saa6588 chip. If this is ever needed, then add a new |
| 'has_saa6588' bit here. */ |
| |
| unsigned int no_video:1; /* video pci function is unused */ |
| unsigned int has_dvb:1; |
| unsigned int has_remote:1; |
| unsigned int has_radio:1; |
| unsigned int has_dig_in:1; /* Has digital input (always last input) */ |
| unsigned int no_gpioirq:1; |
| }; |
| |
| extern struct tvcard bttv_tvcards[]; |
| |
| /* |
| * This bit of cpp voodoo is used to create a macro with a variable number of |
| * arguments (1 to 16). It will pack each argument into a word two bits at a |
| * time. It can't be a function because it needs to be compile time constant to |
| * initialize structures. Since each argument must fit in two bits, it's ok |
| * that they are changed to octal. One should not use hex number, macros, or |
| * anything else with this macro. Just use plain integers from 0 to 3. |
| */ |
| #define _MUXSELf(a) 0##a << 30 |
| #define _MUXSELe(a, b...) 0##a << 28 | _MUXSELf(b) |
| #define _MUXSELd(a, b...) 0##a << 26 | _MUXSELe(b) |
| #define _MUXSELc(a, b...) 0##a << 24 | _MUXSELd(b) |
| #define _MUXSELb(a, b...) 0##a << 22 | _MUXSELc(b) |
| #define _MUXSELa(a, b...) 0##a << 20 | _MUXSELb(b) |
| #define _MUXSEL9(a, b...) 0##a << 18 | _MUXSELa(b) |
| #define _MUXSEL8(a, b...) 0##a << 16 | _MUXSEL9(b) |
| #define _MUXSEL7(a, b...) 0##a << 14 | _MUXSEL8(b) |
| #define _MUXSEL6(a, b...) 0##a << 12 | _MUXSEL7(b) |
| #define _MUXSEL5(a, b...) 0##a << 10 | _MUXSEL6(b) |
| #define _MUXSEL4(a, b...) 0##a << 8 | _MUXSEL5(b) |
| #define _MUXSEL3(a, b...) 0##a << 6 | _MUXSEL4(b) |
| #define _MUXSEL2(a, b...) 0##a << 4 | _MUXSEL3(b) |
| #define _MUXSEL1(a, b...) 0##a << 2 | _MUXSEL2(b) |
| #define MUXSEL(a, b...) (a | _MUXSEL1(b)) |
| |
| /* identification / initialization of the card */ |
| extern void bttv_idcard(struct bttv *btv); |
| extern void bttv_init_card1(struct bttv *btv); |
| extern void bttv_init_card2(struct bttv *btv); |
| extern void bttv_init_tuner(struct bttv *btv); |
| |
| /* card-specific funtions */ |
| extern void tea5757_set_freq(struct bttv *btv, unsigned short freq); |
| extern u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits); |
| |
| /* extra tweaks for some chipsets */ |
| extern void bttv_check_chipset(void); |
| extern int bttv_handle_chipset(struct bttv *btv); |
| |
| /* ---------------------------------------------------------- */ |
| /* exported by bttv-if.c */ |
| |
| /* this obsolete -- please use the sysfs-based |
| interface below for new code */ |
| |
| extern struct pci_dev* bttv_get_pcidev(unsigned int card); |
| |
| /* sets GPOE register (BT848_GPIO_OUT_EN) to new value: |
| data | (current_GPOE_value & ~mask) |
| returns negative value if error occurred |
| */ |
| extern int bttv_gpio_enable(unsigned int card, |
| unsigned long mask, unsigned long data); |
| |
| /* fills data with GPDATA register contents |
| returns negative value if error occurred |
| */ |
| extern int bttv_read_gpio(unsigned int card, unsigned long *data); |
| |
| /* sets GPDATA register to new value: |
| (data & mask) | (current_GPDATA_value & ~mask) |
| returns negative value if error occurred |
| */ |
| extern int bttv_write_gpio(unsigned int card, |
| unsigned long mask, unsigned long data); |
| |
| |
| |
| |
| /* ---------------------------------------------------------- */ |
| /* sysfs/driver-moded based gpio access interface */ |
| |
| struct bttv_sub_device { |
| struct device dev; |
| struct bttv_core *core; |
| struct list_head list; |
| }; |
| #define to_bttv_sub_dev(x) container_of((x), struct bttv_sub_device, dev) |
| |
| struct bttv_sub_driver { |
| struct device_driver drv; |
| char wanted[20]; |
| int (*probe)(struct bttv_sub_device *sub); |
| void (*remove)(struct bttv_sub_device *sub); |
| }; |
| #define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv) |
| |
| int bttv_sub_register(struct bttv_sub_driver *drv, char *wanted); |
| int bttv_sub_unregister(struct bttv_sub_driver *drv); |
| |
| /* gpio access functions */ |
| void bttv_gpio_inout(struct bttv_core *core, u32 mask, u32 outbits); |
| u32 bttv_gpio_read(struct bttv_core *core); |
| void bttv_gpio_write(struct bttv_core *core, u32 value); |
| void bttv_gpio_bits(struct bttv_core *core, u32 mask, u32 bits); |
| |
| #define gpio_inout(mask,bits) bttv_gpio_inout(&btv->c, mask, bits) |
| #define gpio_read() bttv_gpio_read(&btv->c) |
| #define gpio_write(value) bttv_gpio_write(&btv->c, value) |
| #define gpio_bits(mask,bits) bttv_gpio_bits(&btv->c, mask, bits) |
| |
| |
| /* ---------------------------------------------------------- */ |
| /* i2c */ |
| |
| #define bttv_call_all(btv, o, f, args...) \ |
| v4l2_device_call_all(&btv->c.v4l2_dev, 0, o, f, ##args) |
| |
| extern int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for); |
| extern int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, |
| unsigned char b2, int both); |
| extern void bttv_readee(struct bttv *btv, unsigned char *eedata, int addr); |
| |
| extern int bttv_input_init(struct bttv *dev); |
| extern void bttv_input_fini(struct bttv *dev); |
| extern void bttv_input_irq(struct bttv *dev); |
| |
| #endif /* _BTTV_H_ */ |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |
