| /* |
| * mrst.c: Intel Moorestown platform specific setup code |
| * |
| * (C) Copyright 2008 Intel Corporation |
| * Author: Jacob Pan (jacob.jun.pan@intel.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; version 2 |
| * of the License. |
| */ |
| |
| #define pr_fmt(fmt) "mrst: " fmt |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/sfi.h> |
| #include <linux/intel_pmic_gpio.h> |
| #include <linux/spi/spi.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/pca953x.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| |
| #include <asm/setup.h> |
| #include <asm/mpspec_def.h> |
| #include <asm/hw_irq.h> |
| #include <asm/apic.h> |
| #include <asm/io_apic.h> |
| #include <asm/mrst.h> |
| #include <asm/mrst-vrtc.h> |
| #include <asm/io.h> |
| #include <asm/i8259.h> |
| #include <asm/intel_scu_ipc.h> |
| #include <asm/apb_timer.h> |
| #include <asm/reboot.h> |
| |
| /* |
| * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, |
| * cmdline option x86_mrst_timer can be used to override the configuration |
| * to prefer one or the other. |
| * at runtime, there are basically three timer configurations: |
| * 1. per cpu apbt clock only |
| * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only |
| * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast. |
| * |
| * by default (without cmdline option), platform code first detects cpu type |
| * to see if we are on lincroft or penwell, then set up both lapic or apbt |
| * clocks accordingly. |
| * i.e. by default, medfield uses configuration #2, moorestown uses #1. |
| * config #3 is supported but not recommended on medfield. |
| * |
| * rating and feature summary: |
| * lapic (with C3STOP) --------- 100 |
| * apbt (always-on) ------------ 110 |
| * lapic (always-on,ARAT) ------ 150 |
| */ |
| |
| __cpuinitdata enum mrst_timer_options mrst_timer_options; |
| |
| static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; |
| static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; |
| enum mrst_cpu_type __mrst_cpu_chip; |
| EXPORT_SYMBOL_GPL(__mrst_cpu_chip); |
| |
| int sfi_mtimer_num; |
| |
| struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; |
| EXPORT_SYMBOL_GPL(sfi_mrtc_array); |
| int sfi_mrtc_num; |
| |
| /* parse all the mtimer info to a static mtimer array */ |
| static int __init sfi_parse_mtmr(struct sfi_table_header *table) |
| { |
| struct sfi_table_simple *sb; |
| struct sfi_timer_table_entry *pentry; |
| struct mpc_intsrc mp_irq; |
| int totallen; |
| |
| sb = (struct sfi_table_simple *)table; |
| if (!sfi_mtimer_num) { |
| sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, |
| struct sfi_timer_table_entry); |
| pentry = (struct sfi_timer_table_entry *) sb->pentry; |
| totallen = sfi_mtimer_num * sizeof(*pentry); |
| memcpy(sfi_mtimer_array, pentry, totallen); |
| } |
| |
| pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); |
| pentry = sfi_mtimer_array; |
| for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { |
| pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," |
| " irq = %d\n", totallen, (u32)pentry->phys_addr, |
| pentry->freq_hz, pentry->irq); |
| if (!pentry->irq) |
| continue; |
| mp_irq.type = MP_INTSRC; |
| mp_irq.irqtype = mp_INT; |
| /* triggering mode edge bit 2-3, active high polarity bit 0-1 */ |
| mp_irq.irqflag = 5; |
| mp_irq.srcbus = MP_BUS_ISA; |
| mp_irq.srcbusirq = pentry->irq; /* IRQ */ |
| mp_irq.dstapic = MP_APIC_ALL; |
| mp_irq.dstirq = pentry->irq; |
| mp_save_irq(&mp_irq); |
| } |
| |
| return 0; |
| } |
| |
| struct sfi_timer_table_entry *sfi_get_mtmr(int hint) |
| { |
| int i; |
| if (hint < sfi_mtimer_num) { |
| if (!sfi_mtimer_usage[hint]) { |
| pr_debug("hint taken for timer %d irq %d\n",\ |
| hint, sfi_mtimer_array[hint].irq); |
| sfi_mtimer_usage[hint] = 1; |
| return &sfi_mtimer_array[hint]; |
| } |
| } |
| /* take the first timer available */ |
| for (i = 0; i < sfi_mtimer_num;) { |
| if (!sfi_mtimer_usage[i]) { |
| sfi_mtimer_usage[i] = 1; |
| return &sfi_mtimer_array[i]; |
| } |
| i++; |
| } |
| return NULL; |
| } |
| |
| void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) |
| { |
| int i; |
| for (i = 0; i < sfi_mtimer_num;) { |
| if (mtmr->irq == sfi_mtimer_array[i].irq) { |
| sfi_mtimer_usage[i] = 0; |
| return; |
| } |
| i++; |
| } |
| } |
| |
| /* parse all the mrtc info to a global mrtc array */ |
| int __init sfi_parse_mrtc(struct sfi_table_header *table) |
| { |
| struct sfi_table_simple *sb; |
| struct sfi_rtc_table_entry *pentry; |
| struct mpc_intsrc mp_irq; |
| |
| int totallen; |
| |
| sb = (struct sfi_table_simple *)table; |
| if (!sfi_mrtc_num) { |
| sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, |
| struct sfi_rtc_table_entry); |
| pentry = (struct sfi_rtc_table_entry *)sb->pentry; |
| totallen = sfi_mrtc_num * sizeof(*pentry); |
| memcpy(sfi_mrtc_array, pentry, totallen); |
| } |
| |
| pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); |
| pentry = sfi_mrtc_array; |
| for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { |
| pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", |
| totallen, (u32)pentry->phys_addr, pentry->irq); |
| mp_irq.type = MP_INTSRC; |
| mp_irq.irqtype = mp_INT; |
| mp_irq.irqflag = 0xf; /* level trigger and active low */ |
| mp_irq.srcbus = MP_BUS_ISA; |
| mp_irq.srcbusirq = pentry->irq; /* IRQ */ |
| mp_irq.dstapic = MP_APIC_ALL; |
| mp_irq.dstirq = pentry->irq; |
| mp_save_irq(&mp_irq); |
| } |
| return 0; |
| } |
| |
| static unsigned long __init mrst_calibrate_tsc(void) |
| { |
| unsigned long flags, fast_calibrate; |
| |
| local_irq_save(flags); |
| fast_calibrate = apbt_quick_calibrate(); |
| local_irq_restore(flags); |
| |
| if (fast_calibrate) |
| return fast_calibrate; |
| |
| return 0; |
| } |
| |
| static void __init mrst_time_init(void) |
| { |
| sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); |
| switch (mrst_timer_options) { |
| case MRST_TIMER_APBT_ONLY: |
| break; |
| case MRST_TIMER_LAPIC_APBT: |
| x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; |
| x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; |
| break; |
| default: |
| if (!boot_cpu_has(X86_FEATURE_ARAT)) |
| break; |
| x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; |
| x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; |
| return; |
| } |
| /* we need at least one APB timer */ |
| pre_init_apic_IRQ0(); |
| apbt_time_init(); |
| } |
| |
| static void __cpuinit mrst_arch_setup(void) |
| { |
| if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) |
| __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; |
| else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26) |
| __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; |
| else { |
| pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n", |
| boot_cpu_data.x86, boot_cpu_data.x86_model); |
| __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; |
| } |
| pr_debug("Moorestown CPU %s identified\n", |
| (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ? |
| "Lincroft" : "Penwell"); |
| } |
| |
| /* MID systems don't have i8042 controller */ |
| static int mrst_i8042_detect(void) |
| { |
| return 0; |
| } |
| |
| /* Reboot and power off are handled by the SCU on a MID device */ |
| static void mrst_power_off(void) |
| { |
| intel_scu_ipc_simple_command(0xf1, 1); |
| } |
| |
| static void mrst_reboot(void) |
| { |
| intel_scu_ipc_simple_command(0xf1, 0); |
| } |
| |
| /* |
| * Moorestown specific x86_init function overrides and early setup |
| * calls. |
| */ |
| void __init x86_mrst_early_setup(void) |
| { |
| x86_init.resources.probe_roms = x86_init_noop; |
| x86_init.resources.reserve_resources = x86_init_noop; |
| |
| x86_init.timers.timer_init = mrst_time_init; |
| x86_init.timers.setup_percpu_clockev = x86_init_noop; |
| |
| x86_init.irqs.pre_vector_init = x86_init_noop; |
| |
| x86_init.oem.arch_setup = mrst_arch_setup; |
| |
| x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock; |
| |
| x86_platform.calibrate_tsc = mrst_calibrate_tsc; |
| x86_platform.i8042_detect = mrst_i8042_detect; |
| x86_init.timers.wallclock_init = mrst_rtc_init; |
| x86_init.pci.init = pci_mrst_init; |
| x86_init.pci.fixup_irqs = x86_init_noop; |
| |
| legacy_pic = &null_legacy_pic; |
| |
| /* Moorestown specific power_off/restart method */ |
| pm_power_off = mrst_power_off; |
| machine_ops.emergency_restart = mrst_reboot; |
| |
| /* Avoid searching for BIOS MP tables */ |
| x86_init.mpparse.find_smp_config = x86_init_noop; |
| x86_init.mpparse.get_smp_config = x86_init_uint_noop; |
| set_bit(MP_BUS_ISA, mp_bus_not_pci); |
| } |
| |
| /* |
| * if user does not want to use per CPU apb timer, just give it a lower rating |
| * than local apic timer and skip the late per cpu timer init. |
| */ |
| static inline int __init setup_x86_mrst_timer(char *arg) |
| { |
| if (!arg) |
| return -EINVAL; |
| |
| if (strcmp("apbt_only", arg) == 0) |
| mrst_timer_options = MRST_TIMER_APBT_ONLY; |
| else if (strcmp("lapic_and_apbt", arg) == 0) |
| mrst_timer_options = MRST_TIMER_LAPIC_APBT; |
| else { |
| pr_warning("X86 MRST timer option %s not recognised" |
| " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", |
| arg); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| __setup("x86_mrst_timer=", setup_x86_mrst_timer); |
| |
| /* |
| * Parsing GPIO table first, since the DEVS table will need this table |
| * to map the pin name to the actual pin. |
| */ |
| static struct sfi_gpio_table_entry *gpio_table; |
| static int gpio_num_entry; |
| |
| static int __init sfi_parse_gpio(struct sfi_table_header *table) |
| { |
| struct sfi_table_simple *sb; |
| struct sfi_gpio_table_entry *pentry; |
| int num, i; |
| |
| if (gpio_table) |
| return 0; |
| sb = (struct sfi_table_simple *)table; |
| num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); |
| pentry = (struct sfi_gpio_table_entry *)sb->pentry; |
| |
| gpio_table = (struct sfi_gpio_table_entry *) |
| kmalloc(num * sizeof(*pentry), GFP_KERNEL); |
| if (!gpio_table) |
| return -1; |
| memcpy(gpio_table, pentry, num * sizeof(*pentry)); |
| gpio_num_entry = num; |
| |
| pr_debug("GPIO pin info:\n"); |
| for (i = 0; i < num; i++, pentry++) |
| pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," |
| " pin = %d\n", i, |
| pentry->controller_name, |
| pentry->pin_name, |
| pentry->pin_no); |
| return 0; |
| } |
| |
| static int get_gpio_by_name(const char *name) |
| { |
| struct sfi_gpio_table_entry *pentry = gpio_table; |
| int i; |
| |
| if (!pentry) |
| return -1; |
| for (i = 0; i < gpio_num_entry; i++, pentry++) { |
| if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) |
| return pentry->pin_no; |
| } |
| return -1; |
| } |
| |
| /* |
| * Here defines the array of devices platform data that IAFW would export |
| * through SFI "DEVS" table, we use name and type to match the device and |
| * its platform data. |
| */ |
| struct devs_id { |
| char name[SFI_NAME_LEN + 1]; |
| u8 type; |
| u8 delay; |
| void *(*get_platform_data)(void *info); |
| }; |
| |
| /* the offset for the mapping of global gpio pin to irq */ |
| #define MRST_IRQ_OFFSET 0x100 |
| |
| static void __init *pmic_gpio_platform_data(void *info) |
| { |
| static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; |
| int gpio_base = get_gpio_by_name("pmic_gpio_base"); |
| |
| if (gpio_base == -1) |
| gpio_base = 64; |
| pmic_gpio_pdata.gpio_base = gpio_base; |
| pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET; |
| pmic_gpio_pdata.gpiointr = 0xffffeff8; |
| |
| return &pmic_gpio_pdata; |
| } |
| |
| static void __init *max3111_platform_data(void *info) |
| { |
| struct spi_board_info *spi_info = info; |
| int intr = get_gpio_by_name("max3111_int"); |
| |
| if (intr == -1) |
| return NULL; |
| spi_info->irq = intr + MRST_IRQ_OFFSET; |
| return NULL; |
| } |
| |
| /* we have multiple max7315 on the board ... */ |
| #define MAX7315_NUM 2 |
| static void __init *max7315_platform_data(void *info) |
| { |
| static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; |
| static int nr; |
| struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; |
| struct i2c_board_info *i2c_info = info; |
| int gpio_base, intr; |
| char base_pin_name[SFI_NAME_LEN + 1]; |
| char intr_pin_name[SFI_NAME_LEN + 1]; |
| |
| if (nr == MAX7315_NUM) { |
| pr_err("too many max7315s, we only support %d\n", |
| MAX7315_NUM); |
| return NULL; |
| } |
| /* we have several max7315 on the board, we only need load several |
| * instances of the same pca953x driver to cover them |
| */ |
| strcpy(i2c_info->type, "max7315"); |
| if (nr++) { |
| sprintf(base_pin_name, "max7315_%d_base", nr); |
| sprintf(intr_pin_name, "max7315_%d_int", nr); |
| } else { |
| strcpy(base_pin_name, "max7315_base"); |
| strcpy(intr_pin_name, "max7315_int"); |
| } |
| |
| gpio_base = get_gpio_by_name(base_pin_name); |
| intr = get_gpio_by_name(intr_pin_name); |
| |
| if (gpio_base == -1) |
| return NULL; |
| max7315->gpio_base = gpio_base; |
| if (intr != -1) { |
| i2c_info->irq = intr + MRST_IRQ_OFFSET; |
| max7315->irq_base = gpio_base + MRST_IRQ_OFFSET; |
| } else { |
| i2c_info->irq = -1; |
| max7315->irq_base = -1; |
| } |
| return max7315; |
| } |
| |
| static void __init *emc1403_platform_data(void *info) |
| { |
| static short intr2nd_pdata; |
| struct i2c_board_info *i2c_info = info; |
| int intr = get_gpio_by_name("thermal_int"); |
| int intr2nd = get_gpio_by_name("thermal_alert"); |
| |
| if (intr == -1 || intr2nd == -1) |
| return NULL; |
| |
| i2c_info->irq = intr + MRST_IRQ_OFFSET; |
| intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; |
| |
| return &intr2nd_pdata; |
| } |
| |
| static void __init *lis331dl_platform_data(void *info) |
| { |
| static short intr2nd_pdata; |
| struct i2c_board_info *i2c_info = info; |
| int intr = get_gpio_by_name("accel_int"); |
| int intr2nd = get_gpio_by_name("accel_2"); |
| |
| if (intr == -1 || intr2nd == -1) |
| return NULL; |
| |
| i2c_info->irq = intr + MRST_IRQ_OFFSET; |
| intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; |
| |
| return &intr2nd_pdata; |
| } |
| |
| static void __init *no_platform_data(void *info) |
| { |
| return NULL; |
| } |
| |
| static const struct devs_id __initconst device_ids[] = { |
| {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, |
| {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, |
| {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, |
| {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, |
| {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, |
| {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, |
| {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, |
| {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, |
| {}, |
| }; |
| |
| #define MAX_IPCDEVS 24 |
| static struct platform_device *ipc_devs[MAX_IPCDEVS]; |
| static int ipc_next_dev; |
| |
| #define MAX_SCU_SPI 24 |
| static struct spi_board_info *spi_devs[MAX_SCU_SPI]; |
| static int spi_next_dev; |
| |
| #define MAX_SCU_I2C 24 |
| static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; |
| static int i2c_bus[MAX_SCU_I2C]; |
| static int i2c_next_dev; |
| |
| static void __init intel_scu_device_register(struct platform_device *pdev) |
| { |
| if(ipc_next_dev == MAX_IPCDEVS) |
| pr_err("too many SCU IPC devices"); |
| else |
| ipc_devs[ipc_next_dev++] = pdev; |
| } |
| |
| static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) |
| { |
| struct spi_board_info *new_dev; |
| |
| if (spi_next_dev == MAX_SCU_SPI) { |
| pr_err("too many SCU SPI devices"); |
| return; |
| } |
| |
| new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); |
| if (!new_dev) { |
| pr_err("failed to alloc mem for delayed spi dev %s\n", |
| sdev->modalias); |
| return; |
| } |
| memcpy(new_dev, sdev, sizeof(*sdev)); |
| |
| spi_devs[spi_next_dev++] = new_dev; |
| } |
| |
| static void __init intel_scu_i2c_device_register(int bus, |
| struct i2c_board_info *idev) |
| { |
| struct i2c_board_info *new_dev; |
| |
| if (i2c_next_dev == MAX_SCU_I2C) { |
| pr_err("too many SCU I2C devices"); |
| return; |
| } |
| |
| new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); |
| if (!new_dev) { |
| pr_err("failed to alloc mem for delayed i2c dev %s\n", |
| idev->type); |
| return; |
| } |
| memcpy(new_dev, idev, sizeof(*idev)); |
| |
| i2c_bus[i2c_next_dev] = bus; |
| i2c_devs[i2c_next_dev++] = new_dev; |
| } |
| |
| /* Called by IPC driver */ |
| void intel_scu_devices_create(void) |
| { |
| int i; |
| |
| for (i = 0; i < ipc_next_dev; i++) |
| platform_device_add(ipc_devs[i]); |
| |
| for (i = 0; i < spi_next_dev; i++) |
| spi_register_board_info(spi_devs[i], 1); |
| |
| for (i = 0; i < i2c_next_dev; i++) { |
| struct i2c_adapter *adapter; |
| struct i2c_client *client; |
| |
| adapter = i2c_get_adapter(i2c_bus[i]); |
| if (adapter) { |
| client = i2c_new_device(adapter, i2c_devs[i]); |
| if (!client) |
| pr_err("can't create i2c device %s\n", |
| i2c_devs[i]->type); |
| } else |
| i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); |
| } |
| } |
| EXPORT_SYMBOL_GPL(intel_scu_devices_create); |
| |
| /* Called by IPC driver */ |
| void intel_scu_devices_destroy(void) |
| { |
| int i; |
| |
| for (i = 0; i < ipc_next_dev; i++) |
| platform_device_del(ipc_devs[i]); |
| } |
| EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); |
| |
| static void __init install_irq_resource(struct platform_device *pdev, int irq) |
| { |
| /* Single threaded */ |
| static struct resource __initdata res = { |
| .name = "IRQ", |
| .flags = IORESOURCE_IRQ, |
| }; |
| res.start = irq; |
| platform_device_add_resources(pdev, &res, 1); |
| } |
| |
| static void __init sfi_handle_ipc_dev(struct platform_device *pdev) |
| { |
| const struct devs_id *dev = device_ids; |
| void *pdata = NULL; |
| |
| while (dev->name[0]) { |
| if (dev->type == SFI_DEV_TYPE_IPC && |
| !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) { |
| pdata = dev->get_platform_data(pdev); |
| break; |
| } |
| dev++; |
| } |
| pdev->dev.platform_data = pdata; |
| intel_scu_device_register(pdev); |
| } |
| |
| static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info) |
| { |
| const struct devs_id *dev = device_ids; |
| void *pdata = NULL; |
| |
| while (dev->name[0]) { |
| if (dev->type == SFI_DEV_TYPE_SPI && |
| !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) { |
| pdata = dev->get_platform_data(spi_info); |
| break; |
| } |
| dev++; |
| } |
| spi_info->platform_data = pdata; |
| if (dev->delay) |
| intel_scu_spi_device_register(spi_info); |
| else |
| spi_register_board_info(spi_info, 1); |
| } |
| |
| static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info) |
| { |
| const struct devs_id *dev = device_ids; |
| void *pdata = NULL; |
| |
| while (dev->name[0]) { |
| if (dev->type == SFI_DEV_TYPE_I2C && |
| !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) { |
| pdata = dev->get_platform_data(i2c_info); |
| break; |
| } |
| dev++; |
| } |
| i2c_info->platform_data = pdata; |
| |
| if (dev->delay) |
| intel_scu_i2c_device_register(bus, i2c_info); |
| else |
| i2c_register_board_info(bus, i2c_info, 1); |
| } |
| |
| |
| static int __init sfi_parse_devs(struct sfi_table_header *table) |
| { |
| struct sfi_table_simple *sb; |
| struct sfi_device_table_entry *pentry; |
| struct spi_board_info spi_info; |
| struct i2c_board_info i2c_info; |
| struct platform_device *pdev; |
| int num, i, bus; |
| int ioapic; |
| struct io_apic_irq_attr irq_attr; |
| |
| sb = (struct sfi_table_simple *)table; |
| num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); |
| pentry = (struct sfi_device_table_entry *)sb->pentry; |
| |
| for (i = 0; i < num; i++, pentry++) { |
| if (pentry->irq != (u8)0xff) { /* native RTE case */ |
| /* these SPI2 devices are not exposed to system as PCI |
| * devices, but they have separate RTE entry in IOAPIC |
| * so we have to enable them one by one here |
| */ |
| ioapic = mp_find_ioapic(pentry->irq); |
| irq_attr.ioapic = ioapic; |
| irq_attr.ioapic_pin = pentry->irq; |
| irq_attr.trigger = 1; |
| irq_attr.polarity = 1; |
| io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); |
| } else |
| pentry->irq = 0; /* No irq */ |
| |
| switch (pentry->type) { |
| case SFI_DEV_TYPE_IPC: |
| /* ID as IRQ is a hack that will go away */ |
| pdev = platform_device_alloc(pentry->name, pentry->irq); |
| if (pdev == NULL) { |
| pr_err("out of memory for SFI platform device '%s'.\n", |
| pentry->name); |
| continue; |
| } |
| install_irq_resource(pdev, pentry->irq); |
| pr_debug("info[%2d]: IPC bus, name = %16.16s, " |
| "irq = 0x%2x\n", i, pentry->name, pentry->irq); |
| sfi_handle_ipc_dev(pdev); |
| break; |
| case SFI_DEV_TYPE_SPI: |
| memset(&spi_info, 0, sizeof(spi_info)); |
| strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); |
| spi_info.irq = pentry->irq; |
| spi_info.bus_num = pentry->host_num; |
| spi_info.chip_select = pentry->addr; |
| spi_info.max_speed_hz = pentry->max_freq; |
| pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, " |
| "irq = 0x%2x, max_freq = %d, cs = %d\n", i, |
| spi_info.bus_num, |
| spi_info.modalias, |
| spi_info.irq, |
| spi_info.max_speed_hz, |
| spi_info.chip_select); |
| sfi_handle_spi_dev(&spi_info); |
| break; |
| case SFI_DEV_TYPE_I2C: |
| memset(&i2c_info, 0, sizeof(i2c_info)); |
| bus = pentry->host_num; |
| strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); |
| i2c_info.irq = pentry->irq; |
| i2c_info.addr = pentry->addr; |
| pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " |
| "irq = 0x%2x, addr = 0x%x\n", i, bus, |
| i2c_info.type, |
| i2c_info.irq, |
| i2c_info.addr); |
| sfi_handle_i2c_dev(bus, &i2c_info); |
| break; |
| case SFI_DEV_TYPE_UART: |
| case SFI_DEV_TYPE_HSI: |
| default: |
| ; |
| } |
| } |
| return 0; |
| } |
| |
| static int __init mrst_platform_init(void) |
| { |
| sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); |
| sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); |
| return 0; |
| } |
| arch_initcall(mrst_platform_init); |
| |
| /* |
| * we will search these buttons in SFI GPIO table (by name) |
| * and register them dynamically. Please add all possible |
| * buttons here, we will shrink them if no GPIO found. |
| */ |
| static struct gpio_keys_button gpio_button[] = { |
| {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, |
| {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, |
| {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, |
| {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, |
| {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, |
| {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, |
| {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, |
| {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, |
| {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, |
| {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, |
| }; |
| |
| static struct gpio_keys_platform_data mrst_gpio_keys = { |
| .buttons = gpio_button, |
| .rep = 1, |
| .nbuttons = -1, /* will fill it after search */ |
| }; |
| |
| static struct platform_device pb_device = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &mrst_gpio_keys, |
| }, |
| }; |
| |
| /* |
| * Shrink the non-existent buttons, register the gpio button |
| * device if there is some |
| */ |
| static int __init pb_keys_init(void) |
| { |
| struct gpio_keys_button *gb = gpio_button; |
| int i, num, good = 0; |
| |
| num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); |
| for (i = 0; i < num; i++) { |
| gb[i].gpio = get_gpio_by_name(gb[i].desc); |
| if (gb[i].gpio == -1) |
| continue; |
| |
| if (i != good) |
| gb[good] = gb[i]; |
| good++; |
| } |
| |
| if (good) { |
| mrst_gpio_keys.nbuttons = good; |
| return platform_device_register(&pb_device); |
| } |
| return 0; |
| } |
| late_initcall(pb_keys_init); |