| /* |
| * DVB USB Linux driver for Intel CE6230 DVB-T USB2.0 receiver |
| * |
| * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include "ce6230.h" |
| #include "zl10353.h" |
| #include "mxl5005s.h" |
| |
| /* debug */ |
| static int dvb_usb_ce6230_debug; |
| module_param_named(debug, dvb_usb_ce6230_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static struct zl10353_config ce6230_zl10353_config; |
| |
| static int ce6230_rw_udev(struct usb_device *udev, struct req_t *req) |
| { |
| int ret; |
| unsigned int pipe; |
| u8 request; |
| u8 requesttype; |
| u16 value; |
| u16 index; |
| u8 *buf; |
| |
| request = req->cmd; |
| value = req->value; |
| index = req->index; |
| |
| switch (req->cmd) { |
| case I2C_READ: |
| case DEMOD_READ: |
| case REG_READ: |
| requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); |
| break; |
| case I2C_WRITE: |
| case DEMOD_WRITE: |
| case REG_WRITE: |
| requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); |
| break; |
| default: |
| err("unknown command:%02x", req->cmd); |
| ret = -EPERM; |
| goto error; |
| } |
| |
| buf = kmalloc(req->data_len, GFP_KERNEL); |
| if (!buf) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { |
| /* write */ |
| memcpy(buf, req->data, req->data_len); |
| pipe = usb_sndctrlpipe(udev, 0); |
| } else { |
| /* read */ |
| pipe = usb_rcvctrlpipe(udev, 0); |
| } |
| |
| msleep(1); /* avoid I2C errors */ |
| |
| ret = usb_control_msg(udev, pipe, request, requesttype, value, index, |
| buf, req->data_len, CE6230_USB_TIMEOUT); |
| |
| ce6230_debug_dump(request, requesttype, value, index, buf, |
| req->data_len, deb_xfer); |
| |
| if (ret < 0) |
| deb_info("%s: usb_control_msg failed:%d\n", __func__, ret); |
| else |
| ret = 0; |
| |
| /* read request, copy returned data to return buf */ |
| if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) |
| memcpy(req->data, buf, req->data_len); |
| |
| kfree(buf); |
| error: |
| return ret; |
| } |
| |
| static int ce6230_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) |
| { |
| return ce6230_rw_udev(d->udev, req); |
| } |
| |
| /* I2C */ |
| static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i = 0; |
| struct req_t req; |
| int ret = 0; |
| memset(&req, 0, sizeof(req)); |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| while (i < num) { |
| if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { |
| if (msg[i].addr == |
| ce6230_zl10353_config.demod_address) { |
| req.cmd = DEMOD_READ; |
| req.value = msg[i].addr >> 1; |
| req.index = msg[i].buf[0]; |
| req.data_len = msg[i+1].len; |
| req.data = &msg[i+1].buf[0]; |
| ret = ce6230_ctrl_msg(d, &req); |
| } else { |
| err("i2c read not implemented"); |
| ret = -EPERM; |
| } |
| i += 2; |
| } else { |
| if (msg[i].addr == |
| ce6230_zl10353_config.demod_address) { |
| req.cmd = DEMOD_WRITE; |
| req.value = msg[i].addr >> 1; |
| req.index = msg[i].buf[0]; |
| req.data_len = msg[i].len-1; |
| req.data = &msg[i].buf[1]; |
| ret = ce6230_ctrl_msg(d, &req); |
| } else { |
| req.cmd = I2C_WRITE; |
| req.value = 0x2000 + (msg[i].addr >> 1); |
| req.index = 0x0000; |
| req.data_len = msg[i].len; |
| req.data = &msg[i].buf[0]; |
| ret = ce6230_ctrl_msg(d, &req); |
| } |
| i += 1; |
| } |
| if (ret) |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return ret ? ret : i; |
| } |
| |
| static u32 ce6230_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm ce6230_i2c_algo = { |
| .master_xfer = ce6230_i2c_xfer, |
| .functionality = ce6230_i2c_func, |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static struct zl10353_config ce6230_zl10353_config = { |
| .demod_address = 0x1e, |
| .adc_clock = 450000, |
| .if2 = 45700, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| .clock_ctl_1 = 0x34, |
| .pll_0 = 0x0e, |
| }; |
| |
| static int ce6230_zl10353_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| deb_info("%s:\n", __func__); |
| adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &ce6230_zl10353_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe == NULL) |
| return -ENODEV; |
| return 0; |
| } |
| |
| static struct mxl5005s_config ce6230_mxl5003s_config = { |
| .i2c_address = 0xc6, |
| .if_freq = IF_FREQ_4570000HZ, |
| .xtal_freq = CRYSTAL_FREQ_16000000HZ, |
| .agc_mode = MXL_SINGLE_AGC, |
| .tracking_filter = MXL_TF_DEFAULT, |
| .rssi_enable = MXL_RSSI_ENABLE, |
| .cap_select = MXL_CAP_SEL_ENABLE, |
| .div_out = MXL_DIV_OUT_4, |
| .clock_out = MXL_CLOCK_OUT_DISABLE, |
| .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, |
| .top = MXL5005S_TOP_25P2, |
| .mod_mode = MXL_DIGITAL_MODE, |
| .if_mode = MXL_ZERO_IF, |
| .AgcMasterByte = 0x00, |
| }; |
| |
| static int ce6230_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| int ret; |
| deb_info("%s:\n", __func__); |
| ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, |
| &ce6230_mxl5003s_config) == NULL ? -ENODEV : 0; |
| return ret; |
| } |
| |
| static int ce6230_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| int ret; |
| deb_info("%s: onoff:%d\n", __func__, onoff); |
| |
| /* InterfaceNumber 1 / AlternateSetting 0 idle |
| InterfaceNumber 1 / AlternateSetting 1 streaming */ |
| ret = usb_set_interface(d->udev, 1, onoff); |
| if (ret) |
| err("usb_set_interface failed with error:%d", ret); |
| |
| return ret; |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties ce6230_properties; |
| |
| static int ce6230_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| int ret = 0; |
| struct dvb_usb_device *d = NULL; |
| |
| deb_info("%s: interface:%d\n", __func__, |
| intf->cur_altsetting->desc.bInterfaceNumber); |
| |
| if (intf->cur_altsetting->desc.bInterfaceNumber == 1) { |
| ret = dvb_usb_device_init(intf, &ce6230_properties, THIS_MODULE, |
| &d, adapter_nr); |
| if (ret) |
| err("init failed with error:%d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| static struct usb_device_id ce6230_table[] = { |
| { USB_DEVICE(USB_VID_INTEL, USB_PID_INTEL_CE9500) }, |
| { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A310) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, ce6230_table); |
| |
| static struct dvb_usb_device_properties ce6230_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = DEVICE_SPECIFIC, |
| .no_reconnect = 1, |
| |
| .size_of_priv = 0, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = ce6230_zl10353_frontend_attach, |
| .tuner_attach = ce6230_mxl5003s_tuner_attach, |
| .stream = { |
| .type = USB_BULK, |
| .count = 6, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = (16*512), |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| |
| .power_ctrl = ce6230_power_ctrl, |
| |
| .i2c_algo = &ce6230_i2c_algo, |
| |
| .num_device_descs = 2, |
| .devices = { |
| { |
| .name = "Intel CE9500 reference design", |
| .cold_ids = {NULL}, |
| .warm_ids = {&ce6230_table[0], NULL}, |
| }, |
| { |
| .name = "AVerMedia A310 USB 2.0 DVB-T tuner", |
| .cold_ids = {NULL}, |
| .warm_ids = {&ce6230_table[1], NULL}, |
| }, |
| } |
| }; |
| |
| static struct usb_driver ce6230_driver = { |
| .name = "dvb_usb_ce6230", |
| .probe = ce6230_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = ce6230_table, |
| }; |
| |
| /* module stuff */ |
| static int __init ce6230_module_init(void) |
| { |
| int ret; |
| deb_info("%s:\n", __func__); |
| ret = usb_register(&ce6230_driver); |
| if (ret) |
| err("usb_register failed with error:%d", ret); |
| |
| return ret; |
| } |
| |
| static void __exit ce6230_module_exit(void) |
| { |
| deb_info("%s:\n", __func__); |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&ce6230_driver); |
| } |
| |
| module_init(ce6230_module_init); |
| module_exit(ce6230_module_exit); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Driver for Intel CE6230 DVB-T USB2.0"); |
| MODULE_LICENSE("GPL"); |