| /* |
| * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet |
| * driver for Linux. |
| * |
| * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| /* |
| * This file should not be included directly. Include t4vf_common.h instead. |
| */ |
| |
| #ifndef __CXGB4VF_ADAPTER_H__ |
| #define __CXGB4VF_ADAPTER_H__ |
| |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_ether.h> |
| #include <linux/netdevice.h> |
| |
| #include "../cxgb4/t4_hw.h" |
| |
| /* |
| * Constants of the implementation. |
| */ |
| enum { |
| MAX_NPORTS = 1, /* max # of "ports" */ |
| MAX_PORT_QSETS = 8, /* max # of Queue Sets / "port" */ |
| MAX_ETH_QSETS = MAX_NPORTS*MAX_PORT_QSETS, |
| |
| /* |
| * MSI-X interrupt index usage. |
| */ |
| MSIX_FW = 0, /* MSI-X index for firmware Q */ |
| MSIX_IQFLINT = 1, /* MSI-X index base for Ingress Qs */ |
| MSIX_EXTRAS = 1, |
| MSIX_ENTRIES = MAX_ETH_QSETS + MSIX_EXTRAS, |
| |
| /* |
| * The maximum number of Ingress and Egress Queues is determined by |
| * the maximum number of "Queue Sets" which we support plus any |
| * ancillary queues. Each "Queue Set" requires one Ingress Queue |
| * for RX Packet Ingress Event notifications and two Egress Queues for |
| * a Free List and an Ethernet TX list. |
| */ |
| INGQ_EXTRAS = 2, /* firmware event queue and */ |
| /* forwarded interrupts */ |
| MAX_INGQ = MAX_ETH_QSETS+INGQ_EXTRAS, |
| MAX_EGRQ = MAX_ETH_QSETS*2, |
| }; |
| |
| /* |
| * Forward structure definition references. |
| */ |
| struct adapter; |
| struct sge_eth_rxq; |
| struct sge_rspq; |
| |
| /* |
| * Per-"port" information. This is really per-Virtual Interface information |
| * but the use of the "port" nomanclature makes it easier to go back and forth |
| * between the PF and VF drivers ... |
| */ |
| struct port_info { |
| struct adapter *adapter; /* our adapter */ |
| u16 viid; /* virtual interface ID */ |
| s16 xact_addr_filt; /* index of our MAC address filter */ |
| u16 rss_size; /* size of VI's RSS table slice */ |
| u8 pidx; /* index into adapter port[] */ |
| u8 port_id; /* physical port ID */ |
| u8 nqsets; /* # of "Queue Sets" */ |
| u8 first_qset; /* index of first "Queue Set" */ |
| struct link_config link_cfg; /* physical port configuration */ |
| }; |
| |
| /* |
| * Scatter Gather Engine resources for the "adapter". Our ingress and egress |
| * queues are organized into "Queue Sets" with one ingress and one egress |
| * queue per Queue Set. These Queue Sets are aportionable between the "ports" |
| * (Virtual Interfaces). One extra ingress queue is used to receive |
| * asynchronous messages from the firmware. Note that the "Queue IDs" that we |
| * use here are really "Relative Queue IDs" which are returned as part of the |
| * firmware command to allocate queues. These queue IDs are relative to the |
| * absolute Queue ID base of the section of the Queue ID space allocated to |
| * the PF/VF. |
| */ |
| |
| /* |
| * SGE free-list queue state. |
| */ |
| struct rx_sw_desc; |
| struct sge_fl { |
| unsigned int avail; /* # of available RX buffers */ |
| unsigned int pend_cred; /* new buffers since last FL DB ring */ |
| unsigned int cidx; /* consumer index */ |
| unsigned int pidx; /* producer index */ |
| unsigned long alloc_failed; /* # of buffer allocation failures */ |
| unsigned long large_alloc_failed; |
| unsigned long starving; /* # of times FL was found starving */ |
| |
| /* |
| * Write-once/infrequently fields. |
| * ------------------------------- |
| */ |
| |
| unsigned int cntxt_id; /* SGE relative QID for the free list */ |
| unsigned int abs_id; /* SGE absolute QID for the free list */ |
| unsigned int size; /* capacity of free list */ |
| struct rx_sw_desc *sdesc; /* address of SW RX descriptor ring */ |
| __be64 *desc; /* address of HW RX descriptor ring */ |
| dma_addr_t addr; /* PCI bus address of hardware ring */ |
| }; |
| |
| /* |
| * An ingress packet gather list. |
| */ |
| struct pkt_gl { |
| skb_frag_t frags[MAX_SKB_FRAGS]; |
| void *va; /* virtual address of first byte */ |
| unsigned int nfrags; /* # of fragments */ |
| unsigned int tot_len; /* total length of fragments */ |
| }; |
| |
| typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *, |
| const struct pkt_gl *); |
| |
| /* |
| * State for an SGE Response Queue. |
| */ |
| struct sge_rspq { |
| struct napi_struct napi; /* NAPI scheduling control */ |
| const __be64 *cur_desc; /* current descriptor in queue */ |
| unsigned int cidx; /* consumer index */ |
| u8 gen; /* current generation bit */ |
| u8 next_intr_params; /* holdoff params for next interrupt */ |
| int offset; /* offset into current FL buffer */ |
| |
| unsigned int unhandled_irqs; /* bogus interrupts */ |
| |
| /* |
| * Write-once/infrequently fields. |
| * ------------------------------- |
| */ |
| |
| u8 intr_params; /* interrupt holdoff parameters */ |
| u8 pktcnt_idx; /* interrupt packet threshold */ |
| u8 idx; /* queue index within its group */ |
| u16 cntxt_id; /* SGE rel QID for the response Q */ |
| u16 abs_id; /* SGE abs QID for the response Q */ |
| __be64 *desc; /* address of hardware response ring */ |
| dma_addr_t phys_addr; /* PCI bus address of ring */ |
| unsigned int iqe_len; /* entry size */ |
| unsigned int size; /* capcity of response Q */ |
| struct adapter *adapter; /* our adapter */ |
| struct net_device *netdev; /* associated net device */ |
| rspq_handler_t handler; /* the handler for this response Q */ |
| }; |
| |
| /* |
| * Ethernet queue statistics |
| */ |
| struct sge_eth_stats { |
| unsigned long pkts; /* # of ethernet packets */ |
| unsigned long lro_pkts; /* # of LRO super packets */ |
| unsigned long lro_merged; /* # of wire packets merged by LRO */ |
| unsigned long rx_cso; /* # of Rx checksum offloads */ |
| unsigned long vlan_ex; /* # of Rx VLAN extractions */ |
| unsigned long rx_drops; /* # of packets dropped due to no mem */ |
| }; |
| |
| /* |
| * State for an Ethernet Receive Queue. |
| */ |
| struct sge_eth_rxq { |
| struct sge_rspq rspq; /* Response Queue */ |
| struct sge_fl fl; /* Free List */ |
| struct sge_eth_stats stats; /* receive statistics */ |
| }; |
| |
| /* |
| * SGE Transmit Queue state. This contains all of the resources associated |
| * with the hardware status of a TX Queue which is a circular ring of hardware |
| * TX Descriptors. For convenience, it also contains a pointer to a parallel |
| * "Software Descriptor" array but we don't know anything about it here other |
| * than its type name. |
| */ |
| struct tx_desc { |
| /* |
| * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the |
| * hardware: Sizes, Producer and Consumer indices, etc. |
| */ |
| __be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)]; |
| }; |
| struct tx_sw_desc; |
| struct sge_txq { |
| unsigned int in_use; /* # of in-use TX descriptors */ |
| unsigned int size; /* # of descriptors */ |
| unsigned int cidx; /* SW consumer index */ |
| unsigned int pidx; /* producer index */ |
| unsigned long stops; /* # of times queue has been stopped */ |
| unsigned long restarts; /* # of queue restarts */ |
| |
| /* |
| * Write-once/infrequently fields. |
| * ------------------------------- |
| */ |
| |
| unsigned int cntxt_id; /* SGE relative QID for the TX Q */ |
| unsigned int abs_id; /* SGE absolute QID for the TX Q */ |
| struct tx_desc *desc; /* address of HW TX descriptor ring */ |
| struct tx_sw_desc *sdesc; /* address of SW TX descriptor ring */ |
| struct sge_qstat *stat; /* queue status entry */ |
| dma_addr_t phys_addr; /* PCI bus address of hardware ring */ |
| }; |
| |
| /* |
| * State for an Ethernet Transmit Queue. |
| */ |
| struct sge_eth_txq { |
| struct sge_txq q; /* SGE TX Queue */ |
| struct netdev_queue *txq; /* associated netdev TX queue */ |
| unsigned long tso; /* # of TSO requests */ |
| unsigned long tx_cso; /* # of TX checksum offloads */ |
| unsigned long vlan_ins; /* # of TX VLAN insertions */ |
| unsigned long mapping_err; /* # of I/O MMU packet mapping errors */ |
| }; |
| |
| /* |
| * The complete set of Scatter/Gather Engine resources. |
| */ |
| struct sge { |
| /* |
| * Our "Queue Sets" ... |
| */ |
| struct sge_eth_txq ethtxq[MAX_ETH_QSETS]; |
| struct sge_eth_rxq ethrxq[MAX_ETH_QSETS]; |
| |
| /* |
| * Extra ingress queues for asynchronous firmware events and |
| * forwarded interrupts (when in MSI mode). |
| */ |
| struct sge_rspq fw_evtq ____cacheline_aligned_in_smp; |
| |
| struct sge_rspq intrq ____cacheline_aligned_in_smp; |
| spinlock_t intrq_lock; |
| |
| /* |
| * State for managing "starving Free Lists" -- Free Lists which have |
| * fallen below a certain threshold of buffers available to the |
| * hardware and attempts to refill them up to that threshold have |
| * failed. We have a regular "slow tick" timer process which will |
| * make periodic attempts to refill these starving Free Lists ... |
| */ |
| DECLARE_BITMAP(starving_fl, MAX_EGRQ); |
| struct timer_list rx_timer; |
| |
| /* |
| * State for cleaning up completed TX descriptors. |
| */ |
| struct timer_list tx_timer; |
| |
| /* |
| * Write-once/infrequently fields. |
| * ------------------------------- |
| */ |
| |
| u16 max_ethqsets; /* # of available Ethernet queue sets */ |
| u16 ethqsets; /* # of active Ethernet queue sets */ |
| u16 ethtxq_rover; /* Tx queue to clean up next */ |
| u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */ |
| u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */ |
| |
| /* |
| * Reverse maps from Absolute Queue IDs to associated queue pointers. |
| * The absolute Queue IDs are in a compact range which start at a |
| * [potentially large] Base Queue ID. We perform the reverse map by |
| * first converting the Absolute Queue ID into a Relative Queue ID by |
| * subtracting off the Base Queue ID and then use a Relative Queue ID |
| * indexed table to get the pointer to the corresponding software |
| * queue structure. |
| */ |
| unsigned int egr_base; |
| unsigned int ingr_base; |
| void *egr_map[MAX_EGRQ]; |
| struct sge_rspq *ingr_map[MAX_INGQ]; |
| }; |
| |
| /* |
| * Utility macros to convert Absolute- to Relative-Queue indices and Egress- |
| * and Ingress-Queues. The EQ_MAP() and IQ_MAP() macros which provide |
| * pointers to Ingress- and Egress-Queues can be used as both L- and R-values |
| */ |
| #define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base)) |
| #define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base)) |
| |
| #define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)]) |
| #define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)]) |
| |
| /* |
| * Macro to iterate across Queue Sets ("rxq" is a historic misnomer). |
| */ |
| #define for_each_ethrxq(sge, iter) \ |
| for (iter = 0; iter < (sge)->ethqsets; iter++) |
| |
| /* |
| * Per-"adapter" (Virtual Function) information. |
| */ |
| struct adapter { |
| /* PCI resources */ |
| void __iomem *regs; |
| struct pci_dev *pdev; |
| struct device *pdev_dev; |
| |
| /* "adapter" resources */ |
| unsigned long registered_device_map; |
| unsigned long open_device_map; |
| unsigned long flags; |
| struct adapter_params params; |
| |
| /* queue and interrupt resources */ |
| struct { |
| unsigned short vec; |
| char desc[22]; |
| } msix_info[MSIX_ENTRIES]; |
| struct sge sge; |
| |
| /* Linux network device resources */ |
| struct net_device *port[MAX_NPORTS]; |
| const char *name; |
| unsigned int msg_enable; |
| |
| /* debugfs resources */ |
| struct dentry *debugfs_root; |
| |
| /* various locks */ |
| spinlock_t stats_lock; |
| }; |
| |
| enum { /* adapter flags */ |
| FULL_INIT_DONE = (1UL << 0), |
| USING_MSI = (1UL << 1), |
| USING_MSIX = (1UL << 2), |
| QUEUES_BOUND = (1UL << 3), |
| }; |
| |
| /* |
| * The following register read/write routine definitions are required by |
| * the common code. |
| */ |
| |
| /** |
| * t4_read_reg - read a HW register |
| * @adapter: the adapter |
| * @reg_addr: the register address |
| * |
| * Returns the 32-bit value of the given HW register. |
| */ |
| static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr) |
| { |
| return readl(adapter->regs + reg_addr); |
| } |
| |
| /** |
| * t4_write_reg - write a HW register |
| * @adapter: the adapter |
| * @reg_addr: the register address |
| * @val: the value to write |
| * |
| * Write a 32-bit value into the given HW register. |
| */ |
| static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val) |
| { |
| writel(val, adapter->regs + reg_addr); |
| } |
| |
| #ifndef readq |
| static inline u64 readq(const volatile void __iomem *addr) |
| { |
| return readl(addr) + ((u64)readl(addr + 4) << 32); |
| } |
| |
| static inline void writeq(u64 val, volatile void __iomem *addr) |
| { |
| writel(val, addr); |
| writel(val >> 32, addr + 4); |
| } |
| #endif |
| |
| /** |
| * t4_read_reg64 - read a 64-bit HW register |
| * @adapter: the adapter |
| * @reg_addr: the register address |
| * |
| * Returns the 64-bit value of the given HW register. |
| */ |
| static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr) |
| { |
| return readq(adapter->regs + reg_addr); |
| } |
| |
| /** |
| * t4_write_reg64 - write a 64-bit HW register |
| * @adapter: the adapter |
| * @reg_addr: the register address |
| * @val: the value to write |
| * |
| * Write a 64-bit value into the given HW register. |
| */ |
| static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr, |
| u64 val) |
| { |
| writeq(val, adapter->regs + reg_addr); |
| } |
| |
| /** |
| * port_name - return the string name of a port |
| * @adapter: the adapter |
| * @pidx: the port index |
| * |
| * Return the string name of the selected port. |
| */ |
| static inline const char *port_name(struct adapter *adapter, int pidx) |
| { |
| return adapter->port[pidx]->name; |
| } |
| |
| /** |
| * t4_os_set_hw_addr - store a port's MAC address in SW |
| * @adapter: the adapter |
| * @pidx: the port index |
| * @hw_addr: the Ethernet address |
| * |
| * Store the Ethernet address of the given port in SW. Called by the common |
| * code when it retrieves a port's Ethernet address from EEPROM. |
| */ |
| static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx, |
| u8 hw_addr[]) |
| { |
| memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN); |
| memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN); |
| } |
| |
| /** |
| * netdev2pinfo - return the port_info structure associated with a net_device |
| * @dev: the netdev |
| * |
| * Return the struct port_info associated with a net_device |
| */ |
| static inline struct port_info *netdev2pinfo(const struct net_device *dev) |
| { |
| return netdev_priv(dev); |
| } |
| |
| /** |
| * adap2pinfo - return the port_info of a port |
| * @adap: the adapter |
| * @pidx: the port index |
| * |
| * Return the port_info structure for the adapter. |
| */ |
| static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx) |
| { |
| return netdev_priv(adapter->port[pidx]); |
| } |
| |
| /** |
| * netdev2adap - return the adapter structure associated with a net_device |
| * @dev: the netdev |
| * |
| * Return the struct adapter associated with a net_device |
| */ |
| static inline struct adapter *netdev2adap(const struct net_device *dev) |
| { |
| return netdev2pinfo(dev)->adapter; |
| } |
| |
| /* |
| * OS "Callback" function declarations. These are functions that the OS code |
| * is "contracted" to provide for the common code. |
| */ |
| void t4vf_os_link_changed(struct adapter *, int, int); |
| |
| /* |
| * SGE function prototype declarations. |
| */ |
| int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool, |
| struct net_device *, int, |
| struct sge_fl *, rspq_handler_t); |
| int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *, |
| struct net_device *, struct netdev_queue *, |
| unsigned int); |
| void t4vf_free_sge_resources(struct adapter *); |
| |
| int t4vf_eth_xmit(struct sk_buff *, struct net_device *); |
| int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *, |
| const struct pkt_gl *); |
| |
| irq_handler_t t4vf_intr_handler(struct adapter *); |
| irqreturn_t t4vf_sge_intr_msix(int, void *); |
| |
| int t4vf_sge_init(struct adapter *); |
| void t4vf_sge_start(struct adapter *); |
| void t4vf_sge_stop(struct adapter *); |
| |
| #endif /* __CXGB4VF_ADAPTER_H__ */ |