android_usb: Composite USB gadget driver for android.
Change-Id: I4101540916b73a5f4e48684727ff782f98b969c7
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: android gadget: add remote wakeup attribute to android function
Add remote wakeup attribute to configuration descriptor of android
function to advertise remote wakeup capability to host
Acked-by: Allam, Suresh Reddy <sallam@qualcomm.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: link fixes for android composite gadget
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb gadget: Fix null pointer errors in android composite driver
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Allow usb charging to draw up to 500mA instead of 250.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
usb gadget: android: Add helper function for usb_gadget_connect and disconnect.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: call switch_dev_unregister in mass storage unbind callback
This fixes a problem unloading the android gadget driver when built as a module
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: android: Add dependency on switch driver.
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB: gadget: android: Fix USB WHQL Certification Issues
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add "usb_mass_storage" platform driver.
This will be used for configuring vendor, product and release from board file.
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Use usb_mass_storage platform device as parent for lun
If a platform device is specified for the f_mass_storage function, use it as the
parent driver for the lun files in sysfs.
This allows a platform independent file path for controlling USB mass storage
from user space.
Signed-off-by: Mike Lockwood <lockwood@android.com>
drivers: usb: gadget: Add platform data struct for usb_mass_storage device
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: mass_storage: Fix Mass Storage Panic during PC reboot
Submitted on behalf of RaviKumar Vembu <ravi.v@motorola.com>
Signed-off-by: Jared Suttles <jared.suttles@motorola.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Handle setup request correctly
Signed-off-by: Mike Lockwood <lockwood@android.com>
usb: gadget: f_mass_storage: Clean up wakelocks on error paths
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Signed-off-by: Mike Lockwood <lockwood@android.com>
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 23a4473..fd6f9c6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -850,6 +850,15 @@
For more information, see Documentation/usb/gadget_printer.txt
which includes sample code for accessing the device file.
+config USB_ANDROID
+ tristate "Android Gadget"
+ depends on SWITCH
+ help
+ The Android gadget provides mass storage and adb transport.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_android".
+
config USB_CDC_COMPOSITE
tristate "CDC Composite Device (Ethernet and ACM)"
depends on NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index b54ac61..859287b 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -52,6 +52,7 @@
g_webcam-y := webcam.o
g_ncm-y := ncm.o
g_acm_ms-y := acm_ms.o
+g_android-y := android.o
obj-$(CONFIG_USB_ZERO) += g_zero.o
obj-$(CONFIG_USB_AUDIO) += g_audio.o
@@ -71,3 +72,4 @@
obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
+obj-$(CONFIG_USB_ANDROID) += g_android.o
diff --git a/drivers/usb/gadget/android.c b/drivers/usb/gadget/android.c
new file mode 100644
index 0000000..d3c028d
--- /dev/null
+++ b/drivers/usb/gadget/android.c
@@ -0,0 +1,351 @@
+/*
+ * Gadget Driver for Android
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb/android.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+
+#include "f_mass_storage.h"
+#include "f_adb.h"
+
+#include "gadget_chips.h"
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module. So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+#include "composite.c"
+
+MODULE_AUTHOR("Mike Lockwood");
+MODULE_DESCRIPTION("Android Composite USB Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+
+static const char longname[] = "Gadget Android";
+
+/* Default vendor and product IDs, overridden by platform data */
+#define VENDOR_ID 0x18D1
+#define PRODUCT_ID 0x0001
+#define ADB_PRODUCT_ID 0x0002
+
+struct android_dev {
+ struct usb_composite_dev *cdev;
+
+ int product_id;
+ int adb_product_id;
+ int version;
+
+ int adb_enabled;
+ int nluns;
+};
+
+static atomic_t adb_enable_excl;
+static struct android_dev *_android_dev;
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+#define STRING_SERIAL_IDX 2
+
+/* String Table */
+static struct usb_string strings_dev[] = {
+ /* These dummy values should be overridden by platform data */
+ [STRING_MANUFACTURER_IDX].s = "Android",
+ [STRING_PRODUCT_IDX].s = "Android",
+ [STRING_SERIAL_IDX].s = "0123456789ABCDEF",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof(device_desc),
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+ .idVendor = __constant_cpu_to_le16(VENDOR_ID),
+ .idProduct = __constant_cpu_to_le16(PRODUCT_ID),
+ .bcdDevice = __constant_cpu_to_le16(0xffff),
+ .bNumConfigurations = 1,
+};
+
+void android_usb_set_connected(int connected)
+{
+ if (_android_dev && _android_dev->cdev && _android_dev->cdev->gadget) {
+ if (connected)
+ usb_gadget_connect(_android_dev->cdev->gadget);
+ else
+ usb_gadget_disconnect(_android_dev->cdev->gadget);
+ }
+}
+
+static int __init android_bind_config(struct usb_configuration *c)
+{
+ struct android_dev *dev = _android_dev;
+ int ret;
+ printk(KERN_DEBUG "android_bind_config\n");
+
+ ret = mass_storage_function_add(dev->cdev, c, dev->nluns);
+ if (ret)
+ return ret;
+ return adb_function_add(dev->cdev, c);
+}
+
+static struct usb_configuration android_config_driver = {
+ .label = "android",
+ .bind = android_bind_config,
+ .bConfigurationValue = 1,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 0xFA, /* 500ma */
+};
+
+static int __init android_bind(struct usb_composite_dev *cdev)
+{
+ struct android_dev *dev = _android_dev;
+ struct usb_gadget *gadget = cdev->gadget;
+ int gcnum;
+ int id;
+ int ret;
+
+ printk(KERN_INFO "android_bind\n");
+
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
+ */
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_MANUFACTURER_IDX].id = id;
+ device_desc.iManufacturer = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_PRODUCT_IDX].id = id;
+ device_desc.iProduct = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_SERIAL_IDX].id = id;
+ device_desc.iSerialNumber = id;
+
+ /* register our configuration */
+ ret = usb_add_config(cdev, &android_config_driver);
+ if (ret) {
+ printk(KERN_ERR "usb_add_config failed\n");
+ return ret;
+ }
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+ else {
+ /* gadget zero is so simple (for now, no altsettings) that
+ * it SHOULD NOT have problems with bulk-capable hardware.
+ * so just warn about unrcognized controllers -- don't panic.
+ *
+ * things like configuration and altsetting numbering
+ * can need hardware-specific attention though.
+ */
+ pr_warning("%s: controller '%s' not recognized\n",
+ longname, gadget->name);
+ device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+ }
+
+ usb_gadget_set_selfpowered(gadget);
+ dev->cdev = cdev;
+
+ return 0;
+}
+
+static struct usb_composite_driver android_usb_driver = {
+ .name = "android_usb",
+ .dev = &device_desc,
+ .strings = dev_strings,
+ .bind = android_bind,
+};
+
+static void enable_adb(struct android_dev *dev, int enable)
+{
+ if (enable != dev->adb_enabled) {
+ dev->adb_enabled = enable;
+ adb_function_enable(enable);
+
+ /* set product ID to the appropriate value */
+ if (enable)
+ device_desc.idProduct =
+ __constant_cpu_to_le16(dev->adb_product_id);
+ else
+ device_desc.idProduct =
+ __constant_cpu_to_le16(dev->product_id);
+ if (dev->cdev)
+ dev->cdev->desc.idProduct = device_desc.idProduct;
+
+ /* force reenumeration */
+ if (dev->cdev && dev->cdev->gadget &&
+ dev->cdev->gadget->speed != USB_SPEED_UNKNOWN) {
+ usb_gadget_disconnect(dev->cdev->gadget);
+ msleep(10);
+ usb_gadget_connect(dev->cdev->gadget);
+ }
+ }
+}
+
+static int adb_enable_open(struct inode *ip, struct file *fp)
+{
+ if (atomic_inc_return(&adb_enable_excl) != 1) {
+ atomic_dec(&adb_enable_excl);
+ return -EBUSY;
+ }
+
+ printk(KERN_INFO "enabling adb\n");
+ enable_adb(_android_dev, 1);
+
+ return 0;
+}
+
+static int adb_enable_release(struct inode *ip, struct file *fp)
+{
+ printk(KERN_INFO "disabling adb\n");
+ enable_adb(_android_dev, 0);
+ atomic_dec(&adb_enable_excl);
+ return 0;
+}
+
+static const struct file_operations adb_enable_fops = {
+ .owner = THIS_MODULE,
+ .open = adb_enable_open,
+ .release = adb_enable_release,
+};
+
+static struct miscdevice adb_enable_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "android_adb_enable",
+ .fops = &adb_enable_fops,
+};
+
+static int __init android_probe(struct platform_device *pdev)
+{
+ struct android_usb_platform_data *pdata = pdev->dev.platform_data;
+ struct android_dev *dev = _android_dev;
+
+ printk(KERN_INFO "android_probe pdata: %p\n", pdata);
+
+ if (pdata) {
+ if (pdata->vendor_id)
+ device_desc.idVendor =
+ __constant_cpu_to_le16(pdata->vendor_id);
+ if (pdata->product_id) {
+ dev->product_id = pdata->product_id;
+ device_desc.idProduct =
+ __constant_cpu_to_le16(pdata->product_id);
+ }
+ if (pdata->adb_product_id)
+ dev->adb_product_id = pdata->adb_product_id;
+ if (pdata->version)
+ dev->version = pdata->version;
+
+ if (pdata->product_name)
+ strings_dev[STRING_PRODUCT_IDX].s = pdata->product_name;
+ if (pdata->manufacturer_name)
+ strings_dev[STRING_MANUFACTURER_IDX].s =
+ pdata->manufacturer_name;
+ if (pdata->serial_number)
+ strings_dev[STRING_SERIAL_IDX].s = pdata->serial_number;
+ dev->nluns = pdata->nluns;
+ }
+
+ return 0;
+}
+
+static struct platform_driver android_platform_driver = {
+ .driver = { .name = "android_usb", },
+ .probe = android_probe,
+};
+
+static int __init init(void)
+{
+ struct android_dev *dev;
+ int ret;
+
+ printk(KERN_INFO "android init\n");
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ /* set default values, which should be overridden by platform data */
+ dev->product_id = PRODUCT_ID;
+ dev->adb_product_id = ADB_PRODUCT_ID;
+ _android_dev = dev;
+
+ ret = platform_driver_register(&android_platform_driver);
+ if (ret)
+ return ret;
+ ret = misc_register(&adb_enable_device);
+ if (ret) {
+ platform_driver_unregister(&android_platform_driver);
+ return ret;
+ }
+ ret = usb_composite_register(&android_usb_driver);
+ if (ret) {
+ misc_deregister(&adb_enable_device);
+ platform_driver_unregister(&android_platform_driver);
+ }
+ return ret;
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+ usb_composite_unregister(&android_usb_driver);
+ misc_deregister(&adb_enable_device);
+ platform_driver_unregister(&android_platform_driver);
+ kfree(_android_dev);
+ _android_dev = NULL;
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/f_adb.c b/drivers/usb/gadget/f_adb.c
new file mode 100644
index 0000000..63452ed
--- /dev/null
+++ b/drivers/usb/gadget/f_adb.c
@@ -0,0 +1,662 @@
+/*
+ * Gadget Driver for Android ADB
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+
+#include "f_adb.h"
+
+#define BULK_BUFFER_SIZE 4096
+
+/* number of rx and tx requests to allocate */
+#define RX_REQ_MAX 4
+#define TX_REQ_MAX 4
+
+static const char shortname[] = "android_adb";
+
+struct adb_dev {
+ struct usb_function function;
+ struct usb_composite_dev *cdev;
+ spinlock_t lock;
+
+ struct usb_ep *ep_in;
+ struct usb_ep *ep_out;
+
+ int online;
+ int error;
+
+ atomic_t read_excl;
+ atomic_t write_excl;
+ atomic_t open_excl;
+
+ struct list_head tx_idle;
+ struct list_head rx_idle;
+ struct list_head rx_done;
+
+ wait_queue_head_t read_wq;
+ wait_queue_head_t write_wq;
+
+ /* the request we're currently reading from */
+ struct usb_request *read_req;
+ unsigned char *read_buf;
+ unsigned read_count;
+};
+
+static struct usb_interface_descriptor adb_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = 0xFF,
+ .bInterfaceSubClass = 0x42,
+ .bInterfaceProtocol = 1,
+};
+
+static struct usb_endpoint_descriptor adb_highspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor adb_highspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor adb_fullspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor adb_fullspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_adb_descs[] = {
+ (struct usb_descriptor_header *) &adb_interface_desc,
+ (struct usb_descriptor_header *) &adb_fullspeed_in_desc,
+ (struct usb_descriptor_header *) &adb_fullspeed_out_desc,
+ NULL,
+};
+
+static struct usb_descriptor_header *hs_adb_descs[] = {
+ (struct usb_descriptor_header *) &adb_interface_desc,
+ (struct usb_descriptor_header *) &adb_highspeed_in_desc,
+ (struct usb_descriptor_header *) &adb_highspeed_out_desc,
+ NULL,
+};
+
+/* used when adb function is disabled */
+static struct usb_descriptor_header *null_adb_descs[] = {
+ NULL,
+};
+
+
+/* temporary variable used between adb_open() and adb_gadget_bind() */
+static struct adb_dev *_adb_dev;
+
+static inline struct adb_dev *func_to_dev(struct usb_function *f)
+{
+ return container_of(f, struct adb_dev, function);
+}
+
+
+static struct usb_request *adb_request_new(struct usb_ep *ep, int buffer_size)
+{
+ struct usb_request *req = usb_ep_alloc_request(ep, GFP_KERNEL);
+ if (!req)
+ return NULL;
+
+ /* now allocate buffers for the requests */
+ req->buf = kmalloc(buffer_size, GFP_KERNEL);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ return NULL;
+ }
+
+ return req;
+}
+
+static void adb_request_free(struct usb_request *req, struct usb_ep *ep)
+{
+ if (req) {
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+ }
+}
+
+static inline int _lock(atomic_t *excl)
+{
+ if (atomic_inc_return(excl) == 1) {
+ return 0;
+ } else {
+ atomic_dec(excl);
+ return -1;
+ }
+}
+
+static inline void _unlock(atomic_t *excl)
+{
+ atomic_dec(excl);
+}
+
+/* add a request to the tail of a list */
+void req_put(struct adb_dev *dev, struct list_head *head,
+ struct usb_request *req)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ list_add_tail(&req->list, head);
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* remove a request from the head of a list */
+struct usb_request *req_get(struct adb_dev *dev, struct list_head *head)
+{
+ unsigned long flags;
+ struct usb_request *req;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ if (list_empty(head)) {
+ req = 0;
+ } else {
+ req = list_first_entry(head, struct usb_request, list);
+ list_del(&req->list);
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return req;
+}
+
+static void adb_complete_in(struct usb_ep *ep, struct usb_request *req)
+{
+ struct adb_dev *dev = _adb_dev;
+
+ if (req->status != 0)
+ dev->error = 1;
+
+ req_put(dev, &dev->tx_idle, req);
+
+ wake_up(&dev->write_wq);
+}
+
+static void adb_complete_out(struct usb_ep *ep, struct usb_request *req)
+{
+ struct adb_dev *dev = _adb_dev;
+
+ if (req->status != 0) {
+ dev->error = 1;
+ req_put(dev, &dev->rx_idle, req);
+ } else {
+ req_put(dev, &dev->rx_done, req);
+ }
+
+ wake_up(&dev->read_wq);
+}
+
+static int __init create_bulk_endpoints(struct adb_dev *dev,
+ struct usb_endpoint_descriptor *in_desc,
+ struct usb_endpoint_descriptor *out_desc)
+{
+ struct usb_composite_dev *cdev = dev->cdev;
+ struct usb_request *req;
+ struct usb_ep *ep;
+ int i;
+
+ DBG(cdev, "create_bulk_endpoints dev: %p\n", dev);
+
+ ep = usb_ep_autoconfig(cdev->gadget, in_desc);
+ if (!ep) {
+ DBG(cdev, "usb_ep_autoconfig for ep_in failed\n");
+ return -ENODEV;
+ }
+ DBG(cdev, "usb_ep_autoconfig for ep_in got %s\n", ep->name);
+ dev->ep_in = ep;
+
+ ep = usb_ep_autoconfig(cdev->gadget, out_desc);
+ if (!ep) {
+ DBG(cdev, "usb_ep_autoconfig for ep_out failed\n");
+ return -ENODEV;
+ }
+ DBG(cdev, "usb_ep_autoconfig for adb ep_out got %s\n", ep->name);
+ dev->ep_out = ep;
+
+ /* now allocate requests for our endpoints */
+ for (i = 0; i < RX_REQ_MAX; i++) {
+ req = adb_request_new(dev->ep_out, BULK_BUFFER_SIZE);
+ if (!req)
+ goto fail;
+ req->complete = adb_complete_out;
+ req_put(dev, &dev->rx_idle, req);
+ }
+
+ for (i = 0; i < TX_REQ_MAX; i++) {
+ req = adb_request_new(dev->ep_in, BULK_BUFFER_SIZE);
+ if (!req)
+ goto fail;
+ req->complete = adb_complete_in;
+ req_put(dev, &dev->tx_idle, req);
+ }
+
+ return 0;
+
+fail:
+ printk(KERN_ERR "adb_bind() could not allocate requests\n");
+ return -1;
+}
+
+static ssize_t adb_read(struct file *fp, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ struct adb_dev *dev = fp->private_data;
+ struct usb_composite_dev *cdev = dev->cdev;
+ struct usb_request *req;
+ int r = count, xfer;
+ int ret;
+
+ DBG(cdev, "adb_read(%d)\n", count);
+
+ if (_lock(&dev->read_excl))
+ return -EBUSY;
+
+ /* we will block until we're online */
+ while (!(dev->online || dev->error)) {
+ DBG(cdev, "adb_read: waiting for online state\n");
+ ret = wait_event_interruptible(dev->read_wq,
+ (dev->online || dev->error));
+ if (ret < 0) {
+ _unlock(&dev->read_excl);
+ return ret;
+ }
+ }
+
+ while (count > 0) {
+ if (dev->error) {
+ DBG(cdev, "adb_read dev->error\n");
+ r = -EIO;
+ break;
+ }
+
+ /* if we have idle read requests, get them queued */
+ while ((req = req_get(dev, &dev->rx_idle))) {
+requeue_req:
+ req->length = BULK_BUFFER_SIZE;
+ ret = usb_ep_queue(dev->ep_out, req, GFP_ATOMIC);
+
+ if (ret < 0) {
+ r = -EIO;
+ dev->error = 1;
+ req_put(dev, &dev->rx_idle, req);
+ goto fail;
+ } else {
+ DBG(cdev, "rx %p queue\n", req);
+ }
+ }
+
+ /* if we have data pending, give it to userspace */
+ if (dev->read_count > 0) {
+ if (dev->read_count < count)
+ xfer = dev->read_count;
+ else
+ xfer = count;
+
+ if (copy_to_user(buf, dev->read_buf, xfer)) {
+ r = -EFAULT;
+ break;
+ }
+ dev->read_buf += xfer;
+ dev->read_count -= xfer;
+ buf += xfer;
+ count -= xfer;
+
+ /* if we've emptied the buffer, release the request */
+ if (dev->read_count == 0) {
+ req_put(dev, &dev->rx_idle, dev->read_req);
+ dev->read_req = 0;
+ }
+ continue;
+ }
+
+ /* wait for a request to complete */
+ req = 0;
+ ret = wait_event_interruptible(dev->read_wq,
+ ((req = req_get(dev, &dev->rx_done)) || dev->error));
+ if (req != 0) {
+ /* if we got a 0-len one we need to put it back into
+ ** service. if we made it the current read req we'd
+ ** be stuck forever
+ */
+ if (req->actual == 0)
+ goto requeue_req;
+
+ dev->read_req = req;
+ dev->read_count = req->actual;
+ dev->read_buf = req->buf;
+ DBG(cdev, "rx %p %d\n", req, req->actual);
+ }
+
+ if (ret < 0) {
+ r = ret;
+ break;
+ }
+ }
+
+fail:
+ _unlock(&dev->read_excl);
+ DBG(cdev, "adb_read returning %d\n", r);
+ return r;
+}
+
+static ssize_t adb_write(struct file *fp, const char __user *buf,
+ size_t count, loff_t *pos)
+{
+ struct adb_dev *dev = fp->private_data;
+ struct usb_composite_dev *cdev = dev->cdev;
+ struct usb_request *req = 0;
+ int r = count, xfer;
+ int ret;
+
+ DBG(cdev, "adb_write(%d)\n", count);
+
+ if (_lock(&dev->write_excl))
+ return -EBUSY;
+
+ while (count > 0) {
+ if (dev->error) {
+ DBG(cdev, "adb_write dev->error\n");
+ r = -EIO;
+ break;
+ }
+
+ /* get an idle tx request to use */
+ req = 0;
+ ret = wait_event_interruptible(dev->write_wq,
+ ((req = req_get(dev, &dev->tx_idle)) || dev->error));
+
+ if (ret < 0) {
+ r = ret;
+ break;
+ }
+
+ if (req != 0) {
+ if (count > BULK_BUFFER_SIZE)
+ xfer = BULK_BUFFER_SIZE;
+ else
+ xfer = count;
+ if (copy_from_user(req->buf, buf, xfer)) {
+ r = -EFAULT;
+ break;
+ }
+
+ req->length = xfer;
+ ret = usb_ep_queue(dev->ep_in, req, GFP_ATOMIC);
+ if (ret < 0) {
+ DBG(cdev, "adb_write: xfer error %d\n", ret);
+ dev->error = 1;
+ r = -EIO;
+ break;
+ }
+
+ buf += xfer;
+ count -= xfer;
+
+ /* zero this so we don't try to free it on error exit */
+ req = 0;
+ }
+ }
+
+ if (req)
+ req_put(dev, &dev->tx_idle, req);
+
+ _unlock(&dev->write_excl);
+ DBG(cdev, "adb_write returning %d\n", r);
+ return r;
+}
+
+static int adb_open(struct inode *ip, struct file *fp)
+{
+ printk(KERN_INFO "adb_open\n");
+ if (_lock(&_adb_dev->open_excl))
+ return -EBUSY;
+
+ fp->private_data = _adb_dev;
+
+ /* clear the error latch */
+ _adb_dev->error = 0;
+
+ return 0;
+}
+
+static int adb_release(struct inode *ip, struct file *fp)
+{
+ printk(KERN_INFO "adb_release\n");
+ _unlock(&_adb_dev->open_excl);
+ return 0;
+}
+
+/* file operations for ADB device /dev/android_adb */
+static struct file_operations adb_fops = {
+ .owner = THIS_MODULE,
+ .read = adb_read,
+ .write = adb_write,
+ .open = adb_open,
+ .release = adb_release,
+};
+
+static struct miscdevice adb_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = shortname,
+ .fops = &adb_fops,
+};
+
+static int __init
+adb_function_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct adb_dev *dev = func_to_dev(f);
+ int id;
+ int ret;
+
+ dev->cdev = cdev;
+ DBG(cdev, "adb_function_bind dev: %p\n", dev);
+
+ /* allocate interface ID(s) */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ adb_interface_desc.bInterfaceNumber = id;
+
+ /* allocate endpoints */
+ ret = create_bulk_endpoints(dev, &adb_fullspeed_in_desc,
+ &adb_fullspeed_out_desc);
+ if (ret)
+ return ret;
+
+ /* support high speed hardware */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ adb_highspeed_in_desc.bEndpointAddress =
+ adb_fullspeed_in_desc.bEndpointAddress;
+ adb_highspeed_out_desc.bEndpointAddress =
+ adb_fullspeed_out_desc.bEndpointAddress;
+ }
+
+ DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ f->name, dev->ep_in->name, dev->ep_out->name);
+ return 0;
+}
+
+static void
+adb_function_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct adb_dev *dev = func_to_dev(f);
+ struct usb_request *req;
+
+ spin_lock_irq(&dev->lock);
+
+ while ((req = req_get(dev, &dev->rx_idle)))
+ adb_request_free(req, dev->ep_out);
+ while ((req = req_get(dev, &dev->tx_idle)))
+ adb_request_free(req, dev->ep_in);
+
+ dev->online = 0;
+ dev->error = 1;
+ spin_unlock_irq(&dev->lock);
+
+ misc_deregister(&adb_device);
+ kfree(_adb_dev);
+ _adb_dev = NULL;
+}
+
+static int adb_function_set_alt(struct usb_function *f,
+ unsigned intf, unsigned alt)
+{
+ struct adb_dev *dev = func_to_dev(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ int ret;
+
+ DBG(cdev, "adb_function_set_alt intf: %d alt: %d\n", intf, alt);
+ ret = usb_ep_enable(dev->ep_in);
+ if (ret)
+ return ret;
+ ret = usb_ep_enable(dev->ep_out);
+ if (ret) {
+ usb_ep_disable(dev->ep_in);
+ return ret;
+ }
+ dev->online = 1;
+
+ /* readers may be blocked waiting for us to go online */
+ wake_up(&dev->read_wq);
+ return 0;
+}
+
+static void adb_function_disable(struct usb_function *f)
+{
+ struct adb_dev *dev = func_to_dev(f);
+ struct usb_composite_dev *cdev = dev->cdev;
+
+ DBG(cdev, "adb_function_disable\n");
+ dev->online = 0;
+ dev->error = 1;
+ usb_ep_disable(dev->ep_in);
+ usb_ep_disable(dev->ep_out);
+
+ /* readers may be blocked waiting for us to go online */
+ wake_up(&dev->read_wq);
+
+ VDBG(cdev, "%s disabled\n", dev->function.name);
+}
+
+int __init adb_function_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c)
+{
+ struct adb_dev *dev;
+ int ret;
+
+ printk(KERN_INFO "adb_function_add\n");
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ spin_lock_init(&dev->lock);
+
+ init_waitqueue_head(&dev->read_wq);
+ init_waitqueue_head(&dev->write_wq);
+
+ atomic_set(&dev->open_excl, 0);
+ atomic_set(&dev->read_excl, 0);
+ atomic_set(&dev->write_excl, 0);
+
+ INIT_LIST_HEAD(&dev->rx_idle);
+ INIT_LIST_HEAD(&dev->rx_done);
+ INIT_LIST_HEAD(&dev->tx_idle);
+
+ dev->cdev = cdev;
+ dev->function.name = "adb";
+ dev->function.descriptors = null_adb_descs;
+ dev->function.hs_descriptors = null_adb_descs;
+ dev->function.bind = adb_function_bind;
+ dev->function.unbind = adb_function_unbind;
+ dev->function.set_alt = adb_function_set_alt;
+ dev->function.disable = adb_function_disable;
+
+ /* _adb_dev must be set before calling usb_gadget_register_driver */
+ _adb_dev = dev;
+
+ ret = misc_register(&adb_device);
+ if (ret)
+ goto err1;
+ ret = usb_add_function(c, &dev->function);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ misc_deregister(&adb_device);
+err1:
+ kfree(dev);
+ printk(KERN_ERR "adb gadget driver failed to initialize\n");
+ return ret;
+}
+
+void adb_function_enable(int enable)
+{
+ struct adb_dev *dev = _adb_dev;
+
+ if (dev) {
+ DBG(dev->cdev, "adb_function_enable(%s)\n",
+ enable ? "true" : "false");
+
+ if (enable) {
+ dev->function.descriptors = fs_adb_descs;
+ dev->function.hs_descriptors = hs_adb_descs;
+ } else {
+ dev->function.descriptors = null_adb_descs;
+ dev->function.hs_descriptors = null_adb_descs;
+ }
+ }
+}
+
diff --git a/drivers/usb/gadget/f_adb.h b/drivers/usb/gadget/f_adb.h
new file mode 100644
index 0000000..4854ff6
--- /dev/null
+++ b/drivers/usb/gadget/f_adb.h
@@ -0,0 +1,25 @@
+/*
+ * Gadget Driver for Android ADB
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __F_ADB_H
+#define __F_ADB_H
+
+int adb_function_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c);
+void adb_function_enable(int enable);
+
+#endif /* __F_ADB_H */
diff --git a/drivers/usb/gadget/f_mass_storage.h b/drivers/usb/gadget/f_mass_storage.h
new file mode 100644
index 0000000..8e63ac0
--- /dev/null
+++ b/drivers/usb/gadget/f_mass_storage.h
@@ -0,0 +1,52 @@
+/*
+ * drivers/usb/gadget/f_mass_storage.h
+ *
+ * Function Driver for USB Mass Storage
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * Based heavily on the file_storage gadget driver in
+ * drivers/usb/gadget/file_storage.c and licensed under the same terms:
+ *
+ * Copyright (C) 2003-2007 Alan Stern
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __F_MASS_STORAGE_H
+#define __F_MASS_STORAGE_H
+
+int mass_storage_function_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c, int nluns);
+
+#endif /* __F_MASS_STORAGE_H */
diff --git a/drivers/usb/gadget/f_mass_storage_tmp.c b/drivers/usb/gadget/f_mass_storage_tmp.c
new file mode 100644
index 0000000..a0f7f9c
--- /dev/null
+++ b/drivers/usb/gadget/f_mass_storage_tmp.c
@@ -0,0 +1,2975 @@
+/*
+ * drivers/usb/gadget/f_mass_storage.c
+ *
+ * Function Driver for USB Mass Storage
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * Based heavily on the file_storage gadget driver in
+ * drivers/usb/gadget/file_storage.c and licensed under the same terms:
+ *
+ * Copyright (C) 2003-2007 Alan Stern
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+/* #define DUMP_MSGS */
+
+
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/dcache.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/kref.h>
+#include <linux/kthread.h>
+#include <linux/limits.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/switch.h>
+#include <linux/freezer.h>
+#include <linux/utsname.h>
+#include <linux/wakelock.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb_usual.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/android.h>
+
+#include "f_mass_storage.h"
+#include "gadget_chips.h"
+
+
+#define BULK_BUFFER_SIZE 4096
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_NAME "usb_mass_storage"
+#define MAX_LUNS 8
+
+static const char shortname[] = DRIVER_NAME;
+
+#ifdef DEBUG
+#define LDBG(lun, fmt, args...) \
+ dev_dbg(&(lun)->dev , fmt , ## args)
+#define MDBG(fmt,args...) \
+ printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args)
+#else
+#define LDBG(lun, fmt, args...) \
+ do { } while (0)
+#define MDBG(fmt,args...) \
+ do { } while (0)
+#undef VERBOSE_DEBUG
+#undef DUMP_MSGS
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VLDBG LDBG
+#else
+#define VLDBG(lun, fmt, args...) \
+ do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define LERROR(lun, fmt, args...) \
+ dev_err(&(lun)->dev , fmt , ## args)
+#define LWARN(lun, fmt, args...) \
+ dev_warn(&(lun)->dev , fmt , ## args)
+#define LINFO(lun, fmt, args...) \
+ dev_info(&(lun)->dev , fmt , ## args)
+
+#define MINFO(fmt,args...) \
+ printk(KERN_INFO DRIVER_NAME ": " fmt , ## args)
+
+#undef DBG
+#undef VDBG
+#undef ERROR
+#undef WARNING
+#undef INFO
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->cdev->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->cdev->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->cdev->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+ dev_warn(&(d)->cdev->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->cdev->gadget->dev , fmt , ## args)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Bulk-only data structures */
+
+/* Command Block Wrapper */
+struct bulk_cb_wrap {
+ __le32 Signature; /* Contains 'USBC' */
+ u32 Tag; /* Unique per command id */
+ __le32 DataTransferLength; /* Size of the data */
+ u8 Flags; /* Direction in bit 7 */
+ u8 Lun; /* LUN (normally 0) */
+ u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */
+ u8 CDB[16]; /* Command Data Block */
+};
+
+#define USB_BULK_CB_WRAP_LEN 31
+#define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */
+#define USB_BULK_IN_FLAG 0x80
+
+/* Command Status Wrapper */
+struct bulk_cs_wrap {
+ __le32 Signature; /* Should = 'USBS' */
+ u32 Tag; /* Same as original command */
+ __le32 Residue; /* Amount not transferred */
+ u8 Status; /* See below */
+};
+
+#define USB_BULK_CS_WRAP_LEN 13
+#define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */
+#define USB_STATUS_PASS 0
+#define USB_STATUS_FAIL 1
+#define USB_STATUS_PHASE_ERROR 2
+
+/* Bulk-only class specific requests */
+#define USB_BULK_RESET_REQUEST 0xff
+#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe
+
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE 16
+
+/* SCSI commands that we recognize */
+#define SC_FORMAT_UNIT 0x04
+#define SC_INQUIRY 0x12
+#define SC_MODE_SELECT_6 0x15
+#define SC_MODE_SELECT_10 0x55
+#define SC_MODE_SENSE_6 0x1a
+#define SC_MODE_SENSE_10 0x5a
+#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define SC_READ_6 0x08
+#define SC_READ_10 0x28
+#define SC_READ_12 0xa8
+#define SC_READ_CAPACITY 0x25
+#define SC_READ_FORMAT_CAPACITIES 0x23
+#define SC_RELEASE 0x17
+#define SC_REQUEST_SENSE 0x03
+#define SC_RESERVE 0x16
+#define SC_SEND_DIAGNOSTIC 0x1d
+#define SC_START_STOP_UNIT 0x1b
+#define SC_SYNCHRONIZE_CACHE 0x35
+#define SC_TEST_UNIT_READY 0x00
+#define SC_VERIFY 0x2f
+#define SC_WRITE_6 0x0a
+#define SC_WRITE_10 0x2a
+#define SC_WRITE_12 0xaa
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE 0
+#define SS_COMMUNICATION_FAILURE 0x040800
+#define SS_INVALID_COMMAND 0x052000
+#define SS_INVALID_FIELD_IN_CDB 0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500
+#define SS_MEDIUM_NOT_PRESENT 0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION 0x062800
+#define SS_RESET_OCCURRED 0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900
+#define SS_UNRECOVERED_READ_ERROR 0x031100
+#define SS_WRITE_ERROR 0x030c02
+#define SS_WRITE_PROTECTED 0x072700
+
+#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */
+#define ASC(x) ((u8) ((x) >> 8))
+#define ASCQ(x) ((u8) (x))
+
+
+/*-------------------------------------------------------------------------*/
+
+struct lun {
+ struct file *filp;
+ loff_t file_length;
+ loff_t num_sectors;
+
+ unsigned int ro : 1;
+ unsigned int prevent_medium_removal : 1;
+ unsigned int registered : 1;
+ unsigned int info_valid : 1;
+
+ u32 sense_data;
+ u32 sense_data_info;
+ u32 unit_attention_data;
+
+ struct device dev;
+};
+
+#define backing_file_is_open(curlun) ((curlun)->filp != NULL)
+
+
+static struct lun *dev_to_lun(struct device *dev)
+{
+ return container_of(dev, struct lun, dev);
+}
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE 256
+
+/* Number of buffers we will use. 2 is enough for double-buffering */
+#define NUM_BUFFERS 2
+
+enum fsg_buffer_state {
+ BUF_STATE_EMPTY = 0,
+ BUF_STATE_FULL,
+ BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+ void *buf;
+ enum fsg_buffer_state state;
+ struct fsg_buffhd *next;
+
+ /* The NetChip 2280 is faster, and handles some protocol faults
+ * better, if we don't submit any short bulk-out read requests.
+ * So we will record the intended request length here. */
+ unsigned int bulk_out_intended_length;
+
+ struct usb_request *inreq;
+ int inreq_busy;
+ struct usb_request *outreq;
+ int outreq_busy;
+};
+
+enum fsg_state {
+ /* This one isn't used anywhere */
+ FSG_STATE_COMMAND_PHASE = -10,
+
+ FSG_STATE_DATA_PHASE,
+ FSG_STATE_STATUS_PHASE,
+
+ FSG_STATE_IDLE = 0,
+ FSG_STATE_ABORT_BULK_OUT,
+ FSG_STATE_RESET,
+ FSG_STATE_CONFIG_CHANGE,
+ FSG_STATE_EXIT,
+ FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+ DATA_DIR_UNKNOWN = 0,
+ DATA_DIR_FROM_HOST,
+ DATA_DIR_TO_HOST,
+ DATA_DIR_NONE
+};
+
+struct fsg_dev {
+ struct usb_function function;
+ struct usb_composite_dev *cdev;
+
+ /* optional "usb_mass_storage" platform device */
+ struct platform_device *pdev;
+
+ /* lock protects: state and all the req_busy's */
+ spinlock_t lock;
+
+ /* filesem protects: backing files in use */
+ struct rw_semaphore filesem;
+
+ /* reference counting: wait until all LUNs are released */
+ struct kref ref;
+
+ unsigned int bulk_out_maxpacket;
+ enum fsg_state state; /* For exception handling */
+
+ u8 config, new_config;
+
+ unsigned int running : 1;
+ unsigned int bulk_in_enabled : 1;
+ unsigned int bulk_out_enabled : 1;
+ unsigned int phase_error : 1;
+ unsigned int short_packet_received : 1;
+ unsigned int bad_lun_okay : 1;
+
+ unsigned long atomic_bitflags;
+#define REGISTERED 0
+#define CLEAR_BULK_HALTS 1
+#define SUSPENDED 2
+
+ struct usb_ep *bulk_in;
+ struct usb_ep *bulk_out;
+
+ struct fsg_buffhd *next_buffhd_to_fill;
+ struct fsg_buffhd *next_buffhd_to_drain;
+ struct fsg_buffhd buffhds[NUM_BUFFERS];
+
+ int thread_wakeup_needed;
+ struct completion thread_notifier;
+ struct task_struct *thread_task;
+
+ int cmnd_size;
+ u8 cmnd[MAX_COMMAND_SIZE];
+ enum data_direction data_dir;
+ u32 data_size;
+ u32 data_size_from_cmnd;
+ u32 tag;
+ unsigned int lun;
+ u32 residue;
+ u32 usb_amount_left;
+
+ unsigned int nluns;
+ struct lun *luns;
+ struct lun *curlun;
+
+ u32 buf_size;
+ const char *vendor;
+ const char *product;
+ int release;
+
+ struct switch_dev sdev;
+
+ struct wake_lock wake_lock;
+};
+
+static inline struct fsg_dev *func_to_dev(struct usb_function *f)
+{
+ return container_of(f, struct fsg_dev, function);
+}
+
+static int exception_in_progress(struct fsg_dev *fsg)
+{
+ return (fsg->state > FSG_STATE_IDLE);
+}
+
+/* Make bulk-out requests be divisible by the maxpacket size */
+static void set_bulk_out_req_length(struct fsg_dev *fsg,
+ struct fsg_buffhd *bh, unsigned int length)
+{
+ unsigned int rem;
+
+ bh->bulk_out_intended_length = length;
+ rem = length % fsg->bulk_out_maxpacket;
+ if (rem > 0)
+ length += fsg->bulk_out_maxpacket - rem;
+ bh->outreq->length = length;
+}
+
+static struct fsg_dev *the_fsg;
+
+static void close_backing_file(struct fsg_dev *fsg, struct lun *curlun);
+static void close_all_backing_files(struct fsg_dev *fsg);
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DUMP_MSGS
+
+static void dump_msg(struct fsg_dev *fsg, const char *label,
+ const u8 *buf, unsigned int length)
+{
+ if (length < 512) {
+ DBG(fsg, "%s, length %u:\n", label, length);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+ 16, 1, buf, length, 0);
+ }
+}
+
+static void dump_cdb(struct fsg_dev *fsg)
+{}
+
+#else
+
+static void dump_msg(struct fsg_dev *fsg, const char *label,
+ const u8 *buf, unsigned int length)
+{}
+
+#ifdef VERBOSE_DEBUG
+
+static void dump_cdb(struct fsg_dev *fsg)
+{
+ print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE,
+ 16, 1, fsg->cmnd, fsg->cmnd_size, 0);
+}
+
+#else
+
+static void dump_cdb(struct fsg_dev *fsg)
+{}
+
+#endif /* VERBOSE_DEBUG */
+#endif /* DUMP_MSGS */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Routines for unaligned data access */
+
+static u16 get_be16(u8 *buf)
+{
+ return ((u16) buf[0] << 8) | ((u16) buf[1]);
+}
+
+static u32 get_be32(u8 *buf)
+{
+ return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
+ ((u32) buf[2] << 8) | ((u32) buf[3]);
+}
+
+static void put_be16(u8 *buf, u16 val)
+{
+ buf[0] = val >> 8;
+ buf[1] = val;
+}
+
+static void put_be32(u8 *buf, u32 val)
+{
+ buf[0] = val >> 24;
+ buf[1] = val >> 16;
+ buf[2] = val >> 8;
+ buf[3] = val & 0xff;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand. Also the (static) config and interface
+ * descriptors are adjusted during fsg_bind().
+ */
+
+/* There is only one interface. */
+
+static struct usb_interface_descriptor
+intf_desc = {
+ .bLength = sizeof intf_desc,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
+ .bInterfaceClass = USB_CLASS_MASS_STORAGE,
+ .bInterfaceSubClass = US_SC_SCSI,
+ .bInterfaceProtocol = US_PR_BULK,
+};
+
+/* Three full-speed endpoint descriptors: bulk-in, bulk-out,
+ * and interrupt-in. */
+
+static struct usb_endpoint_descriptor
+fs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_endpoint_descriptor
+fs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_descriptor_header *fs_function[] = {
+ (struct usb_descriptor_header *) &intf_desc,
+ (struct usb_descriptor_header *) &fs_bulk_in_desc,
+ (struct usb_descriptor_header *) &fs_bulk_out_desc,
+ NULL,
+};
+#define FS_FUNCTION_PRE_EP_ENTRIES 2
+
+
+static struct usb_endpoint_descriptor
+hs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor
+hs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+ .bInterval = 1, /* NAK every 1 uframe */
+};
+
+
+static struct usb_descriptor_header *hs_function[] = {
+ (struct usb_descriptor_header *) &intf_desc,
+ (struct usb_descriptor_header *) &hs_bulk_in_desc,
+ (struct usb_descriptor_header *) &hs_bulk_out_desc,
+ NULL,
+};
+
+/* Maxpacket and other transfer characteristics vary by speed. */
+static struct usb_endpoint_descriptor *
+ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
+ struct usb_endpoint_descriptor *hs)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return hs;
+ return fs;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* These routines may be called in process context or in_irq */
+
+/* Caller must hold fsg->lock */
+static void wakeup_thread(struct fsg_dev *fsg)
+{
+ /* Tell the main thread that something has happened */
+ fsg->thread_wakeup_needed = 1;
+ if (fsg->thread_task)
+ wake_up_process(fsg->thread_task);
+}
+
+
+static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
+{
+ unsigned long flags;
+
+ DBG(fsg, "raise_exception %d\n", (int)new_state);
+ /* Do nothing if a higher-priority exception is already in progress.
+ * If a lower-or-equal priority exception is in progress, preempt it
+ * and notify the main thread by sending it a signal. */
+ spin_lock_irqsave(&fsg->lock, flags);
+ if (fsg->state <= new_state) {
+ fsg->state = new_state;
+ if (fsg->thread_task)
+ send_sig_info(SIGUSR1, SEND_SIG_FORCED,
+ fsg->thread_task);
+ }
+ spin_unlock_irqrestore(&fsg->lock, flags);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Bulk and interrupt endpoint completion handlers.
+ * These always run in_irq. */
+
+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
+
+ if (req->status || req->actual != req->length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
+ req->status, req->actual, req->length);
+
+ /* Hold the lock while we update the request and buffer states */
+ smp_wmb();
+ spin_lock(&fsg->lock);
+ bh->inreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ wakeup_thread(fsg);
+ spin_unlock(&fsg->lock);
+}
+
+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
+
+ dump_msg(fsg, "bulk-out", req->buf, req->actual);
+ if (req->status || req->actual != bh->bulk_out_intended_length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
+ req->status, req->actual,
+ bh->bulk_out_intended_length);
+
+ /* Hold the lock while we update the request and buffer states */
+ smp_wmb();
+ spin_lock(&fsg->lock);
+ bh->outreq_busy = 0;
+ bh->state = BUF_STATE_FULL;
+ wakeup_thread(fsg);
+ spin_unlock(&fsg->lock);
+}
+
+static int fsg_function_setup(struct usb_function *f,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct fsg_dev *fsg = func_to_dev(f);
+ struct usb_composite_dev *cdev = fsg->cdev;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ DBG(fsg, "fsg_function_setup\n");
+ /* Handle Bulk-only class-specific requests */
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) {
+ DBG(fsg, "USB_TYPE_CLASS\n");
+ switch (ctrl->bRequest) {
+ case USB_BULK_RESET_REQUEST:
+ if (ctrl->bRequestType != (USB_DIR_OUT |
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != 0 || w_value != 0) {
+ value = -EDOM;
+ break;
+ }
+
+ /* Raise an exception to stop the current operation
+ * and reinitialize our state. */
+ DBG(fsg, "bulk reset request\n");
+ raise_exception(fsg, FSG_STATE_RESET);
+ value = 0;
+ break;
+
+ case USB_BULK_GET_MAX_LUN_REQUEST:
+ if (ctrl->bRequestType != (USB_DIR_IN |
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != 0 || w_value != 0) {
+ value = -EDOM;
+ break;
+ }
+ VDBG(fsg, "get max LUN\n");
+ *(u8 *)cdev->req->buf = fsg->nluns - 1;
+ value = 1;
+ break;
+ }
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ int rc;
+ cdev->req->zero = value < w_length;
+ cdev->req->length = value;
+ rc = usb_ep_queue(cdev->gadget->ep0, cdev->req, GFP_ATOMIC);
+ if (rc < 0)
+ printk("%s setup response queue error\n", __func__);
+ }
+
+ if (value == -EOPNOTSUPP)
+ VDBG(fsg,
+ "unknown class-specific control req "
+ "%02x.%02x v%04x i%04x l%u\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ le16_to_cpu(ctrl->wValue), w_index, w_length);
+ return value;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* All the following routines run in process context */
+
+
+/* Use this for bulk or interrupt transfers, not ep0 */
+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
+ struct usb_request *req, int *pbusy,
+ enum fsg_buffer_state *state)
+{
+ int rc;
+
+ DBG(fsg, "start_transfer req: %p, req->buf: %p\n", req, req->buf);
+ if (ep == fsg->bulk_in)
+ dump_msg(fsg, "bulk-in", req->buf, req->length);
+
+ spin_lock_irq(&fsg->lock);
+ *pbusy = 1;
+ *state = BUF_STATE_BUSY;
+ spin_unlock_irq(&fsg->lock);
+ rc = usb_ep_queue(ep, req, GFP_KERNEL);
+ if (rc != 0) {
+ *pbusy = 0;
+ *state = BUF_STATE_EMPTY;
+
+ /* We can't do much more than wait for a reset */
+
+ /* Note: currently the net2280 driver fails zero-length
+ * submissions if DMA is enabled. */
+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
+ req->length == 0))
+ WARN(fsg, "error in submission: %s --> %d\n",
+ (ep == fsg->bulk_in ? "bulk-in" : "bulk-out"),
+ rc);
+ }
+}
+
+
+static int sleep_thread(struct fsg_dev *fsg)
+{
+ int rc = 0;
+
+ /* Wait until a signal arrives or we are woken up */
+ for (;;) {
+ try_to_freeze();
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (signal_pending(current)) {
+ rc = -EINTR;
+ break;
+ }
+ if (fsg->thread_wakeup_needed)
+ break;
+ schedule();
+ }
+ __set_current_state(TASK_RUNNING);
+ fsg->thread_wakeup_needed = 0;
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_read(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int rc;
+ u32 amount_left;
+ loff_t file_offset, file_offset_tmp;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nread;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (fsg->cmnd[0] == SC_READ_6)
+ lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ else {
+ lba = get_be32(&fsg->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = don't read from the
+ * cache), but we don't implement them. */
+ if ((fsg->cmnd[1] & ~0x18) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Carry out the file reads */
+ amount_left = fsg->data_size_from_cmnd;
+ if (unlikely(amount_left == 0))
+ return -EIO; /* No default reply */
+
+ for (;;) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount.
+ * But don't read more than the buffer size.
+ * And don't try to read past the end of the file.
+ * Finally, if we're not at a page boundary, don't read past
+ * the next page.
+ * If this means reading 0 then we were asked to read past
+ * the end of file. */
+ amount = min((unsigned int) amount_left,
+ (unsigned int)fsg->buf_size);
+ amount = min((loff_t) amount,
+ curlun->file_length - file_offset);
+ partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
+ partial_page);
+
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+
+ /* If we were asked to read past the end of file,
+ * end with an empty buffer. */
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ bh->inreq->length = 0;
+ bh->state = BUF_STATE_FULL;
+ break;
+ }
+
+ /* Perform the read */
+ file_offset_tmp = file_offset;
+ nread = vfs_read(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+ if (signal_pending(current))
+ return -EINTR;
+
+ if (nread < 0) {
+ LDBG(curlun, "error in file read: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file read: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); /* Round down to a block */
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ fsg->residue -= nread;
+ bh->inreq->length = nread;
+ bh->state = BUF_STATE_FULL;
+
+ /* If an error occurred, report it and its position */
+ if (nread < amount) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ if (amount_left == 0)
+ break; /* No more left to read */
+
+ /* Send this buffer and go read some more */
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ }
+
+ return -EIO; /* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_write(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int get_some_more;
+ u32 amount_left_to_req, amount_left_to_write;
+ loff_t usb_offset, file_offset, file_offset_tmp;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nwritten;
+ int rc;
+
+ if (curlun->ro) {
+ curlun->sense_data = SS_WRITE_PROTECTED;
+ return -EINVAL;
+ }
+ curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (fsg->cmnd[0] == SC_WRITE_6)
+ lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ else {
+ lba = get_be32(&fsg->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = write directly to the
+ * medium). We don't implement DPO; we implement FUA by
+ * performing synchronous output. */
+ if ((fsg->cmnd[1] & ~0x18) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ if (fsg->cmnd[1] & 0x08) /* FUA */
+ curlun->filp->f_flags |= O_SYNC;
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* Carry out the file writes */
+ get_some_more = 1;
+ file_offset = usb_offset = ((loff_t) lba) << 9;
+ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
+
+ while (amount_left_to_write > 0) {
+
+ /* Queue a request for more data from the host */
+ bh = fsg->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY && get_some_more) {
+
+ /* Figure out how much we want to get:
+ * Try to get the remaining amount.
+ * But don't get more than the buffer size.
+ * And don't try to go past the end of the file.
+ * If we're not at a page boundary,
+ * don't go past the next page.
+ * If this means getting 0, then we were asked
+ * to write past the end of file.
+ * Finally, round down to a block boundary. */
+ amount = min(amount_left_to_req, (u32)fsg->buf_size);
+ amount = min((loff_t) amount, curlun->file_length -
+ usb_offset);
+ partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount,
+ (unsigned int) PAGE_CACHE_SIZE - partial_page);
+
+ if (amount == 0) {
+ get_some_more = 0;
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = usb_offset >> 9;
+ curlun->info_valid = 1;
+ continue;
+ }
+ amount -= (amount & 511);
+ if (amount == 0) {
+
+ /* Why were we were asked to transfer a
+ * partial block? */
+ get_some_more = 0;
+ continue;
+ }
+
+ /* Get the next buffer */
+ usb_offset += amount;
+ fsg->usb_amount_left -= amount;
+ amount_left_to_req -= amount;
+ if (amount_left_to_req == 0)
+ get_some_more = 0;
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = bh->bulk_out_intended_length =
+ amount;
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ continue;
+ }
+
+ /* Write the received data to the backing file */
+ bh = fsg->next_buffhd_to_drain;
+ if (bh->state == BUF_STATE_EMPTY && !get_some_more)
+ break; /* We stopped early */
+ if (bh->state == BUF_STATE_FULL) {
+ smp_rmb();
+ fsg->next_buffhd_to_drain = bh->next;
+ bh->state = BUF_STATE_EMPTY;
+
+ /* Did something go wrong with the transfer? */
+ if (bh->outreq->status != 0) {
+ curlun->sense_data = SS_COMMUNICATION_FAILURE;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ amount = bh->outreq->actual;
+ if (curlun->file_length - file_offset < amount) {
+ LERROR(curlun,
+ "write %u @ %llu beyond end %llu\n",
+ amount, (unsigned long long) file_offset,
+ (unsigned long long) curlun->file_length);
+ amount = curlun->file_length - file_offset;
+ }
+
+ /* Perform the write */
+ file_offset_tmp = file_offset;
+ nwritten = vfs_write(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nwritten);
+ if (signal_pending(current))
+ return -EINTR; /* Interrupted! */
+
+ if (nwritten < 0) {
+ LDBG(curlun, "error in file write: %d\n",
+ (int) nwritten);
+ nwritten = 0;
+ } else if (nwritten < amount) {
+ LDBG(curlun, "partial file write: %d/%u\n",
+ (int) nwritten, amount);
+ nwritten -= (nwritten & 511);
+ /* Round down to a block */
+ }
+ file_offset += nwritten;
+ amount_left_to_write -= nwritten;
+ fsg->residue -= nwritten;
+
+ /* If an error occurred, report it and its position */
+ if (nwritten < amount) {
+ curlun->sense_data = SS_WRITE_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ /* Did the host decide to stop early? */
+ if (bh->outreq->actual != bh->outreq->length) {
+ fsg->short_packet_received = 1;
+ break;
+ }
+ continue;
+ }
+
+ /* Wait for something to happen */
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+
+ return -EIO; /* No default reply */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Sync the file data, don't bother with the metadata.
+ * The caller must own fsg->filesem.
+ * This code was copied from fs/buffer.c:sys_fdatasync(). */
+static int fsync_sub(struct lun *curlun)
+{
+ struct file *filp = curlun->filp;
+ struct inode *inode;
+ int rc, err;
+
+ if (curlun->ro || !filp)
+ return 0;
+ if (!filp->f_op->fsync)
+ return -EINVAL;
+
+ inode = filp->f_path.dentry->d_inode;
+ mutex_lock(&inode->i_mutex);
+ rc = filemap_fdatawrite(inode->i_mapping);
+ err = filp->f_op->fsync(filp, 1);
+ if (!rc)
+ rc = err;
+ err = filemap_fdatawait(inode->i_mapping);
+ if (!rc)
+ rc = err;
+ mutex_unlock(&inode->i_mutex);
+ VLDBG(curlun, "fdatasync -> %d\n", rc);
+ return rc;
+}
+
+static void fsync_all(struct fsg_dev *fsg)
+{
+ int i;
+
+ for (i = 0; i < fsg->nluns; ++i)
+ fsync_sub(&fsg->luns[i]);
+}
+
+static int do_synchronize_cache(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int rc;
+
+ /* We ignore the requested LBA and write out all file's
+ * dirty data buffers. */
+ rc = fsync_sub(curlun);
+ if (rc)
+ curlun->sense_data = SS_WRITE_ERROR;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void invalidate_sub(struct lun *curlun)
+{
+ struct file *filp = curlun->filp;
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ unsigned long rc;
+
+ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
+ VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc);
+}
+
+static int do_verify(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ u32 verification_length;
+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
+ loff_t file_offset, file_offset_tmp;
+ u32 amount_left;
+ unsigned int amount;
+ ssize_t nread;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ lba = get_be32(&fsg->cmnd[2]);
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) but we don't implement it. */
+ if ((fsg->cmnd[1] & ~0x10) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ verification_length = get_be16(&fsg->cmnd[7]);
+ if (unlikely(verification_length == 0))
+ return -EIO; /* No default reply */
+
+ /* Prepare to carry out the file verify */
+ amount_left = verification_length << 9;
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Write out all the dirty buffers before invalidating them */
+ fsync_sub(curlun);
+ if (signal_pending(current))
+ return -EINTR;
+
+ invalidate_sub(curlun);
+ if (signal_pending(current))
+ return -EINTR;
+
+ /* Just try to read the requested blocks */
+ while (amount_left > 0) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount, but not more than
+ * the buffer size.
+ * And don't try to read past the end of the file.
+ * If this means reading 0 then we were asked to read
+ * past the end of file. */
+ amount = min((unsigned int) amount_left,
+ (unsigned int)fsg->buf_size);
+ amount = min((loff_t) amount,
+ curlun->file_length - file_offset);
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ break;
+ }
+
+ /* Perform the read */
+ file_offset_tmp = file_offset;
+ nread = vfs_read(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+ if (signal_pending(current))
+ return -EINTR;
+
+ if (nread < 0) {
+ LDBG(curlun, "error in file verify: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file verify: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); /* Round down to a sector */
+ }
+ if (nread == 0) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ curlun->info_valid = 1;
+ break;
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ }
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ u8 *buf = (u8 *) bh->buf;
+
+ if (!fsg->curlun) { /* Unsupported LUNs are okay */
+ fsg->bad_lun_okay = 1;
+ memset(buf, 0, 36);
+ buf[0] = 0x7f; /* Unsupported, no device-type */
+ return 36;
+ }
+
+ memset(buf, 0, 8); /* Non-removable, direct-access device */
+
+ buf[1] = 0x80; /* set removable bit */
+ buf[2] = 2; /* ANSI SCSI level 2 */
+ buf[3] = 2; /* SCSI-2 INQUIRY data format */
+ buf[4] = 31; /* Additional length */
+ /* No special options */
+ sprintf(buf + 8, "%-8s%-16s%04x", fsg->vendor,
+ fsg->product, fsg->release);
+ return 36;
+}
+
+
+static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u8 *buf = (u8 *) bh->buf;
+ u32 sd, sdinfo;
+ int valid;
+
+ /*
+ * From the SCSI-2 spec., section 7.9 (Unit attention condition):
+ *
+ * If a REQUEST SENSE command is received from an initiator
+ * with a pending unit attention condition (before the target
+ * generates the contingent allegiance condition), then the
+ * target shall either:
+ * a) report any pending sense data and preserve the unit
+ * attention condition on the logical unit, or,
+ * b) report the unit attention condition, may discard any
+ * pending sense data, and clear the unit attention
+ * condition on the logical unit for that initiator.
+ *
+ * FSG normally uses option a); enable this code to use option b).
+ */
+#if 0
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ }
+#endif
+
+ if (!curlun) { /* Unsupported LUNs are okay */
+ fsg->bad_lun_okay = 1;
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+ sdinfo = 0;
+ valid = 0;
+ } else {
+ sd = curlun->sense_data;
+ sdinfo = curlun->sense_data_info;
+ valid = curlun->info_valid << 7;
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ curlun->info_valid = 0;
+ }
+
+ memset(buf, 0, 18);
+ buf[0] = valid | 0x70; /* Valid, current error */
+ buf[2] = SK(sd);
+ put_be32(&buf[3], sdinfo); /* Sense information */
+ buf[7] = 18 - 8; /* Additional sense length */
+ buf[12] = ASC(sd);
+ buf[13] = ASCQ(sd);
+ return 18;
+}
+
+
+static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba = get_be32(&fsg->cmnd[2]);
+ int pmi = fsg->cmnd[8];
+ u8 *buf = (u8 *) bh->buf;
+
+ /* Check the PMI and LBA fields */
+ if (pmi > 1 || (pmi == 0 && lba != 0)) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ put_be32(&buf[0], curlun->num_sectors - 1); /* Max logical block */
+ put_be32(&buf[4], 512); /* Block length */
+ return 8;
+}
+
+
+static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ int mscmnd = fsg->cmnd[0];
+ u8 *buf = (u8 *) bh->buf;
+ u8 *buf0 = buf;
+ int pc, page_code;
+ int changeable_values, all_pages;
+ int valid_page = 0;
+ int len, limit;
+
+ if ((fsg->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ pc = fsg->cmnd[2] >> 6;
+ page_code = fsg->cmnd[2] & 0x3f;
+ if (pc == 3) {
+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
+ return -EINVAL;
+ }
+ changeable_values = (pc == 1);
+ all_pages = (page_code == 0x3f);
+
+ /* Write the mode parameter header. Fixed values are: default
+ * medium type, no cache control (DPOFUA), and no block descriptors.
+ * The only variable value is the WriteProtect bit. We will fill in
+ * the mode data length later. */
+ memset(buf, 0, 8);
+ if (mscmnd == SC_MODE_SENSE_6) {
+ buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
+ buf += 4;
+ limit = 255;
+ } else { /* SC_MODE_SENSE_10 */
+ buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
+ buf += 8;
+ limit = 65535;
+ }
+
+ /* No block descriptors */
+
+ /* Disabled to workaround USB reset problems with a Vista host.
+ */
+#if 0
+ /* The mode pages, in numerical order. The only page we support
+ * is the Caching page. */
+ if (page_code == 0x08 || all_pages) {
+ valid_page = 1;
+ buf[0] = 0x08; /* Page code */
+ buf[1] = 10; /* Page length */
+ memset(buf+2, 0, 10); /* None of the fields are changeable */
+
+ if (!changeable_values) {
+ buf[2] = 0x04; /* Write cache enable, */
+ /* Read cache not disabled */
+ /* No cache retention priorities */
+ put_be16(&buf[4], 0xffff); /* Don't disable prefetch */
+ /* Minimum prefetch = 0 */
+ put_be16(&buf[8], 0xffff); /* Maximum prefetch */
+ /* Maximum prefetch ceiling */
+ put_be16(&buf[10], 0xffff);
+ }
+ buf += 12;
+ }
+#else
+ valid_page = 1;
+#endif
+
+ /* Check that a valid page was requested and the mode data length
+ * isn't too long. */
+ len = buf - buf0;
+ if (!valid_page || len > limit) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ /* Store the mode data length */
+ if (mscmnd == SC_MODE_SENSE_6)
+ buf0[0] = len - 1;
+ else
+ put_be16(buf0, len - 2);
+ return len;
+}
+
+static int do_start_stop(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int loej, start;
+
+ /* int immed = fsg->cmnd[1] & 0x01; */
+ loej = fsg->cmnd[4] & 0x02;
+ start = fsg->cmnd[4] & 0x01;
+
+ if (loej) {
+ /* eject request from the host */
+ if (backing_file_is_open(curlun)) {
+ close_backing_file(fsg, curlun);
+ curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+ }
+ }
+
+ return 0;
+}
+
+static int do_prevent_allow(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int prevent;
+
+ prevent = fsg->cmnd[4] & 0x01;
+ if ((fsg->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ if (curlun->prevent_medium_removal && !prevent)
+ fsync_sub(curlun);
+ curlun->prevent_medium_removal = prevent;
+ return 0;
+}
+
+
+static int do_read_format_capacities(struct fsg_dev *fsg,
+ struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u8 *buf = (u8 *) bh->buf;
+
+ buf[0] = buf[1] = buf[2] = 0;
+ buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
+ buf += 4;
+
+ put_be32(&buf[0], curlun->num_sectors); /* Number of blocks */
+ put_be32(&buf[4], 512); /* Block length */
+ buf[4] = 0x02; /* Current capacity */
+ return 12;
+}
+
+
+static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+
+ /* We don't support MODE SELECT */
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+}
+
+
+/*-------------------------------------------------------------------------*/
+#if 0
+static int write_zero(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ int rc;
+
+ DBG(fsg, "write_zero\n");
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+
+ bh->inreq->length = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+
+ fsg->next_buffhd_to_fill = bh->next;
+ return 0;
+}
+#endif
+
+static int throw_away_data(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ u32 amount;
+ int rc;
+
+ DBG(fsg, "throw_away_data\n");
+ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
+ fsg->usb_amount_left > 0) {
+
+ /* Throw away the data in a filled buffer */
+ if (bh->state == BUF_STATE_FULL) {
+ smp_rmb();
+ bh->state = BUF_STATE_EMPTY;
+ fsg->next_buffhd_to_drain = bh->next;
+
+ /* A short packet or an error ends everything */
+ if (bh->outreq->actual != bh->outreq->length ||
+ bh->outreq->status != 0) {
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ return -EINTR;
+ }
+ continue;
+ }
+
+ /* Try to submit another request if we need one */
+ bh = fsg->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
+ amount = min(fsg->usb_amount_left, (u32) fsg->buf_size);
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = bh->bulk_out_intended_length =
+ amount;
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ fsg->usb_amount_left -= amount;
+ continue;
+ }
+
+ /* Otherwise wait for something to happen */
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+ return 0;
+}
+
+
+static int finish_reply(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
+ int rc = 0;
+
+ switch (fsg->data_dir) {
+ case DATA_DIR_NONE:
+ break; /* Nothing to send */
+
+ case DATA_DIR_UNKNOWN:
+ rc = -EINVAL;
+ break;
+
+ /* All but the last buffer of data must have already been sent */
+ case DATA_DIR_TO_HOST:
+ if (fsg->data_size == 0)
+ ; /* Nothing to send */
+
+ /* If there's no residue, simply send the last buffer */
+ else if (fsg->residue == 0) {
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ } else {
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+#if 0
+ /* this is unnecessary, and was causing problems with MacOS */
+ if (bh->inreq->length > 0)
+ write_zero(fsg);
+#endif
+ }
+ break;
+
+ /* We have processed all we want from the data the host has sent.
+ * There may still be outstanding bulk-out requests. */
+ case DATA_DIR_FROM_HOST:
+ if (fsg->residue == 0)
+ ; /* Nothing to receive */
+
+ /* Did the host stop sending unexpectedly early? */
+ else if (fsg->short_packet_received) {
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+ }
+
+ /* We haven't processed all the incoming data. Even though
+ * we may be allowed to stall, doing so would cause a race.
+ * The controller may already have ACK'ed all the remaining
+ * bulk-out packets, in which case the host wouldn't see a
+ * STALL. Not realizing the endpoint was halted, it wouldn't
+ * clear the halt -- leading to problems later on. */
+#if 0
+ fsg_set_halt(fsg, fsg->bulk_out);
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+#endif
+
+ /* We can't stall. Read in the excess data and throw it
+ * all away. */
+ else
+ rc = throw_away_data(fsg);
+ break;
+ }
+ return rc;
+}
+
+
+static int send_status(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ struct fsg_buffhd *bh;
+ int rc;
+ u8 status = USB_STATUS_PASS;
+ u32 sd, sdinfo = 0;
+ struct bulk_cs_wrap *csw;
+
+ DBG(fsg, "send_status\n");
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+
+ if (curlun) {
+ sd = curlun->sense_data;
+ sdinfo = curlun->sense_data_info;
+ } else if (fsg->bad_lun_okay)
+ sd = SS_NO_SENSE;
+ else
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+
+ if (fsg->phase_error) {
+ DBG(fsg, "sending phase-error status\n");
+ status = USB_STATUS_PHASE_ERROR;
+ sd = SS_INVALID_COMMAND;
+ } else if (sd != SS_NO_SENSE) {
+ DBG(fsg, "sending command-failure status\n");
+ status = USB_STATUS_FAIL;
+ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
+ " info x%x\n",
+ SK(sd), ASC(sd), ASCQ(sd), sdinfo);
+ }
+
+ csw = bh->buf;
+
+ /* Store and send the Bulk-only CSW */
+ csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG);
+ csw->Tag = fsg->tag;
+ csw->Residue = cpu_to_le32(fsg->residue);
+ csw->Status = status;
+
+ bh->inreq->length = USB_BULK_CS_WRAP_LEN;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+
+ fsg->next_buffhd_to_fill = bh->next;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have. */
+static int check_command(struct fsg_dev *fsg, int cmnd_size,
+ enum data_direction data_dir, unsigned int mask,
+ int needs_medium, const char *name)
+{
+ int i;
+ int lun = fsg->cmnd[1] >> 5;
+ static const char dirletter[4] = {'u', 'o', 'i', 'n'};
+ char hdlen[20];
+ struct lun *curlun;
+
+ hdlen[0] = 0;
+ if (fsg->data_dir != DATA_DIR_UNKNOWN)
+ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
+ fsg->data_size);
+ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
+ name, cmnd_size, dirletter[(int) data_dir],
+ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
+
+ /* We can't reply at all until we know the correct data direction
+ * and size. */
+ if (fsg->data_size_from_cmnd == 0)
+ data_dir = DATA_DIR_NONE;
+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { /* CB or CBI */
+ fsg->data_dir = data_dir;
+ fsg->data_size = fsg->data_size_from_cmnd;
+
+ } else { /* Bulk-only */
+ if (fsg->data_size < fsg->data_size_from_cmnd) {
+
+ /* Host data size < Device data size is a phase error.
+ * Carry out the command, but only transfer as much
+ * as we are allowed. */
+ DBG(fsg, "phase error 1\n");
+ fsg->data_size_from_cmnd = fsg->data_size;
+ fsg->phase_error = 1;
+ }
+ }
+ fsg->residue = fsg->usb_amount_left = fsg->data_size;
+
+ /* Conflicting data directions is a phase error */
+ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
+ fsg->phase_error = 1;
+ DBG(fsg, "phase error 2\n");
+ return -EINVAL;
+ }
+
+ /* Verify the length of the command itself */
+ if (cmnd_size != fsg->cmnd_size) {
+
+ /* Special case workaround: MS-Windows issues REQUEST SENSE
+ * with cbw->Length == 12 (it should be 6). */
+ if (fsg->cmnd[0] == SC_REQUEST_SENSE && fsg->cmnd_size == 12)
+ cmnd_size = fsg->cmnd_size;
+ else {
+ fsg->phase_error = 1;
+ return -EINVAL;
+ }
+ }
+
+ /* Check that the LUN values are consistent */
+ if (fsg->lun != lun)
+ DBG(fsg, "using LUN %d from CBW, "
+ "not LUN %d from CDB\n",
+ fsg->lun, lun);
+
+ /* Check the LUN */
+ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) {
+ fsg->curlun = curlun = &fsg->luns[fsg->lun];
+ if (fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ curlun->info_valid = 0;
+ }
+ } else {
+ fsg->curlun = curlun = NULL;
+ fsg->bad_lun_okay = 0;
+
+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed
+ * to use unsupported LUNs; all others may not. */
+ if (fsg->cmnd[0] != SC_INQUIRY &&
+ fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ DBG(fsg, "unsupported LUN %d\n", fsg->lun);
+ return -EINVAL;
+ }
+ }
+
+ /* If a unit attention condition exists, only INQUIRY and
+ * REQUEST SENSE commands are allowed; anything else must fail. */
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
+ fsg->cmnd[0] != SC_INQUIRY &&
+ fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ return -EINVAL;
+ }
+
+ /* Check that only command bytes listed in the mask are non-zero */
+ fsg->cmnd[1] &= 0x1f; /* Mask away the LUN */
+ for (i = 1; i < cmnd_size; ++i) {
+ if (fsg->cmnd[i] && !(mask & (1 << i))) {
+ if (curlun)
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ DBG(fsg, "SS_INVALID_FIELD_IN_CDB\n");
+ return -EINVAL;
+ }
+ }
+
+ /* If the medium isn't mounted and the command needs to access
+ * it, return an error. */
+ if (curlun && !backing_file_is_open(curlun) && needs_medium) {
+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+ DBG(fsg, "SS_MEDIUM_NOT_PRESENT\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int do_scsi_command(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ int rc;
+ int reply = -EINVAL;
+ int i;
+ static char unknown[16];
+
+ dump_cdb(fsg);
+
+ /* Wait for the next buffer to become available for data or status */
+ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg);
+ if (rc)
+ return rc;
+ }
+ fsg->phase_error = 0;
+ fsg->short_packet_received = 0;
+
+ down_read(&fsg->filesem); /* We're using the backing file */
+ switch (fsg->cmnd[0]) {
+
+ case SC_INQUIRY:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "INQUIRY")) == 0)
+ reply = do_inquiry(fsg, bh);
+ break;
+
+ case SC_MODE_SELECT_6:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (1<<1) | (1<<4), 0,
+ "MODE SELECT(6)")) == 0)
+ reply = do_mode_select(fsg, bh);
+ break;
+
+ case SC_MODE_SELECT_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (3<<7), 0,
+ "MODE SELECT(10)")) == 0)
+ reply = do_mode_select(fsg, bh);
+ break;
+
+ case SC_MODE_SENSE_6:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (1<<4), 0,
+ "MODE SENSE(6)")) == 0)
+ reply = do_mode_sense(fsg, bh);
+ break;
+
+ case SC_MODE_SENSE_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (3<<7), 0,
+ "MODE SENSE(10)")) == 0)
+ reply = do_mode_sense(fsg, bh);
+ break;
+
+ case SC_PREVENT_ALLOW_MEDIUM_REMOVAL:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<4), 0,
+ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
+ reply = do_prevent_allow(fsg);
+ break;
+
+ case SC_READ_6:
+ i = fsg->cmnd[4];
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (7<<1) | (1<<4), 1,
+ "READ(6)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "READ(10)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_12:
+ fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "READ(12)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_CAPACITY:
+ fsg->data_size_from_cmnd = 8;
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (0xf<<2) | (1<<8), 1,
+ "READ CAPACITY")) == 0)
+ reply = do_read_capacity(fsg, bh);
+ break;
+
+ case SC_READ_FORMAT_CAPACITIES:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (3<<7), 1,
+ "READ FORMAT CAPACITIES")) == 0)
+ reply = do_read_format_capacities(fsg, bh);
+ break;
+
+ case SC_REQUEST_SENSE:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "REQUEST SENSE")) == 0)
+ reply = do_request_sense(fsg, bh);
+ break;
+
+ case SC_START_STOP_UNIT:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<1) | (1<<4), 0,
+ "START-STOP UNIT")) == 0)
+ reply = do_start_stop(fsg);
+ break;
+
+ case SC_SYNCHRONIZE_CACHE:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (0xf<<2) | (3<<7), 1,
+ "SYNCHRONIZE CACHE")) == 0)
+ reply = do_synchronize_cache(fsg);
+ break;
+
+ case SC_TEST_UNIT_READY:
+ fsg->data_size_from_cmnd = 0;
+ reply = check_command(fsg, 6, DATA_DIR_NONE,
+ 0, 1,
+ "TEST UNIT READY");
+ break;
+
+ /* Although optional, this command is used by MS-Windows. We
+ * support a minimal version: BytChk must be 0. */
+ case SC_VERIFY:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "VERIFY")) == 0)
+ reply = do_verify(fsg);
+ break;
+
+ case SC_WRITE_6:
+ i = fsg->cmnd[4];
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (7<<1) | (1<<4), 1,
+ "WRITE(6)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ case SC_WRITE_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "WRITE(10)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ case SC_WRITE_12:
+ fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "WRITE(12)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ /* Some mandatory commands that we recognize but don't implement.
+ * They don't mean much in this setting. It's left as an exercise
+ * for anyone interested to implement RESERVE and RELEASE in terms
+ * of Posix locks. */
+ case SC_FORMAT_UNIT:
+ case SC_RELEASE:
+ case SC_RESERVE:
+ case SC_SEND_DIAGNOSTIC:
+ /* Fall through */
+
+ default:
+ fsg->data_size_from_cmnd = 0;
+ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
+ if ((reply = check_command(fsg, fsg->cmnd_size,
+ DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ fsg->curlun->sense_data = SS_INVALID_COMMAND;
+ reply = -EINVAL;
+ }
+ break;
+ }
+ up_read(&fsg->filesem);
+
+ VDBG(fsg, "reply: %d, fsg->data_size_from_cmnd: %d\n",
+ reply, fsg->data_size_from_cmnd);
+ if (reply == -EINTR || signal_pending(current))
+ return -EINTR;
+
+ /* Set up the single reply buffer for finish_reply() */
+ if (reply == -EINVAL)
+ reply = 0; /* Error reply length */
+ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
+ reply = min((u32) reply, fsg->data_size_from_cmnd);
+ bh->inreq->length = reply;
+ bh->state = BUF_STATE_FULL;
+ fsg->residue -= reply;
+ } /* Otherwise it's already set */
+
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct usb_request *req = bh->outreq;
+ struct bulk_cb_wrap *cbw = req->buf;
+
+ /* Was this a real packet? */
+ if (req->status)
+ return -EINVAL;
+
+ /* Is the CBW valid? */
+ if (req->actual != USB_BULK_CB_WRAP_LEN ||
+ cbw->Signature != __constant_cpu_to_le32(
+ USB_BULK_CB_SIG)) {
+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
+ req->actual,
+ le32_to_cpu(cbw->Signature));
+ return -EINVAL;
+ }
+
+ /* Is the CBW meaningful? */
+ if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
+ "cmdlen %u\n",
+ cbw->Lun, cbw->Flags, cbw->Length);
+ return -EINVAL;
+ }
+
+ /* Save the command for later */
+ fsg->cmnd_size = cbw->Length;
+ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
+ if (cbw->Flags & USB_BULK_IN_FLAG)
+ fsg->data_dir = DATA_DIR_TO_HOST;
+ else
+ fsg->data_dir = DATA_DIR_FROM_HOST;
+ fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
+ if (fsg->data_size == 0)
+ fsg->data_dir = DATA_DIR_NONE;
+ fsg->lun = cbw->Lun;
+ fsg->tag = cbw->Tag;
+ return 0;
+}
+
+
+static int get_next_command(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ int rc = 0;
+
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ rc = sleep_thread(fsg);
+ if (rc) {
+ usb_ep_dequeue(fsg->bulk_out, bh->outreq);
+ bh->outreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ return rc;
+ }
+ }
+
+ /* Queue a request to read a Bulk-only CBW */
+ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+
+ /* We will drain the buffer in software, which means we
+ * can reuse it for the next filling. No need to advance
+ * next_buffhd_to_fill. */
+
+ /* Wait for the CBW to arrive */
+ while (bh->state != BUF_STATE_FULL) {
+ rc = sleep_thread(fsg);
+ if (rc) {
+ usb_ep_dequeue(fsg->bulk_out, bh->outreq);
+ bh->outreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ return rc;
+ }
+ }
+ smp_rmb();
+ rc = received_cbw(fsg, bh);
+ bh->state = BUF_STATE_EMPTY;
+
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *d)
+{
+ int rc;
+
+ DBG(fsg, "usb_ep_enable %s\n", ep->name);
+ ep->driver_data = fsg;
+ rc = usb_ep_enable(ep, d);
+ if (rc)
+ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
+ return rc;
+}
+
+static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
+ struct usb_request **preq)
+{
+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (*preq)
+ return 0;
+ ERROR(fsg, "can't allocate request for %s\n", ep->name);
+ return -ENOMEM;
+}
+
+/*
+ * Reset interface setting and re-init endpoint state (toggle etc).
+ * Call with altsetting < 0 to disable the interface. The only other
+ * available altsetting is 0, which enables the interface.
+ */
+static int do_set_interface(struct fsg_dev *fsg, int altsetting)
+{
+ struct usb_composite_dev *cdev = fsg->cdev;
+ int rc = 0;
+ int i;
+ const struct usb_endpoint_descriptor *d;
+
+ if (fsg->running)
+ DBG(fsg, "reset interface\n");
+reset:
+ /* Disable the endpoints */
+ if (fsg->bulk_in_enabled) {
+ DBG(fsg, "usb_ep_disable %s\n", fsg->bulk_in->name);
+ usb_ep_disable(fsg->bulk_in);
+ fsg->bulk_in_enabled = 0;
+ }
+ if (fsg->bulk_out_enabled) {
+ DBG(fsg, "usb_ep_disable %s\n", fsg->bulk_out->name);
+ usb_ep_disable(fsg->bulk_out);
+ fsg->bulk_out_enabled = 0;
+ }
+
+ /* Deallocate the requests */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+ if (bh->inreq) {
+ usb_ep_free_request(fsg->bulk_in, bh->inreq);
+ bh->inreq = NULL;
+ }
+ if (bh->outreq) {
+ usb_ep_free_request(fsg->bulk_out, bh->outreq);
+ bh->outreq = NULL;
+ }
+ }
+
+
+ fsg->running = 0;
+ if (altsetting < 0 || rc != 0)
+ return rc;
+
+ DBG(fsg, "set interface %d\n", altsetting);
+
+ /* Enable the endpoints */
+ d = ep_desc(cdev->gadget, &fs_bulk_in_desc, &hs_bulk_in_desc);
+ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
+ goto reset;
+ fsg->bulk_in_enabled = 1;
+
+ d = ep_desc(cdev->gadget, &fs_bulk_out_desc, &hs_bulk_out_desc);
+ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
+ goto reset;
+ fsg->bulk_out_enabled = 1;
+ fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+
+ /* Allocate the requests */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq);
+ if (rc != 0)
+ goto reset;
+ rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq);
+ if (rc != 0)
+ goto reset;
+ bh->inreq->buf = bh->outreq->buf = bh->buf;
+ bh->inreq->context = bh->outreq->context = bh;
+ bh->inreq->complete = bulk_in_complete;
+ bh->outreq->complete = bulk_out_complete;
+ }
+
+ fsg->running = 1;
+ for (i = 0; i < fsg->nluns; ++i)
+ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+
+ return rc;
+}
+
+static void adjust_wake_lock(struct fsg_dev *fsg)
+{
+ int ums_active = 0;
+ int i;
+
+ spin_lock_irq(&fsg->lock);
+
+ if (fsg->config) {
+ for (i = 0; i < fsg->nluns; ++i) {
+ if (backing_file_is_open(&fsg->luns[i]))
+ ums_active = 1;
+ }
+ }
+
+ if (ums_active)
+ wake_lock(&fsg->wake_lock);
+ else
+ wake_unlock(&fsg->wake_lock);
+
+ spin_unlock_irq(&fsg->lock);
+}
+
+/*
+ * Change our operational configuration. This code must agree with the code
+ * that returns config descriptors, and with interface altsetting code.
+ *
+ * It's also responsible for power management interactions. Some
+ * configurations might not work with our current power sources.
+ * For now we just assume the gadget is always self-powered.
+ */
+static int do_set_config(struct fsg_dev *fsg, u8 new_config)
+{
+ int rc = 0;
+
+ if (new_config == fsg->config)
+ return rc;
+
+ /* Disable the single interface */
+ if (fsg->config != 0) {
+ DBG(fsg, "reset config\n");
+ fsg->config = 0;
+ }
+
+ /* Enable the interface */
+ if (new_config != 0)
+ fsg->config = new_config;
+
+ switch_set_state(&fsg->sdev, new_config);
+ adjust_wake_lock(fsg);
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void handle_exception(struct fsg_dev *fsg)
+{
+ siginfo_t info;
+ int sig;
+ int i;
+ struct fsg_buffhd *bh;
+ enum fsg_state old_state;
+ u8 new_config;
+ struct lun *curlun;
+ int rc;
+
+ DBG(fsg, "handle_exception state: %d\n", (int)fsg->state);
+ /* Clear the existing signals. Anything but SIGUSR1 is converted
+ * into a high-priority EXIT exception. */
+ for (;;) {
+ sig = dequeue_signal_lock(current, ¤t->blocked, &info);
+ if (!sig)
+ break;
+ if (sig != SIGUSR1) {
+ if (fsg->state < FSG_STATE_EXIT)
+ DBG(fsg, "Main thread exiting on signal\n");
+ raise_exception(fsg, FSG_STATE_EXIT);
+ }
+ }
+
+ /*
+ * Do NOT flush the fifo after set_interface()
+ * Otherwise, it results in some data being lost
+ */
+ if ((fsg->state != FSG_STATE_CONFIG_CHANGE) ||
+ (fsg->new_config != 1)) {
+ /* Clear out the controller's fifos */
+ if (fsg->bulk_in_enabled)
+ usb_ep_fifo_flush(fsg->bulk_in);
+ if (fsg->bulk_out_enabled)
+ usb_ep_fifo_flush(fsg->bulk_out);
+ }
+ /* Reset the I/O buffer states and pointers, the SCSI
+ * state, and the exception. Then invoke the handler. */
+ spin_lock_irq(&fsg->lock);
+
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ bh = &fsg->buffhds[i];
+ bh->state = BUF_STATE_EMPTY;
+ }
+ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
+ &fsg->buffhds[0];
+
+ new_config = fsg->new_config;
+ old_state = fsg->state;
+
+ if (old_state == FSG_STATE_ABORT_BULK_OUT)
+ fsg->state = FSG_STATE_STATUS_PHASE;
+ else {
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ curlun->prevent_medium_removal = 0;
+ curlun->sense_data = curlun->unit_attention_data =
+ SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ curlun->info_valid = 0;
+ }
+ fsg->state = FSG_STATE_IDLE;
+ }
+ spin_unlock_irq(&fsg->lock);
+
+ /* Carry out any extra actions required for the exception */
+ switch (old_state) {
+ default:
+ break;
+
+ case FSG_STATE_ABORT_BULK_OUT:
+ DBG(fsg, "FSG_STATE_ABORT_BULK_OUT\n");
+ spin_lock_irq(&fsg->lock);
+ if (fsg->state == FSG_STATE_STATUS_PHASE)
+ fsg->state = FSG_STATE_IDLE;
+ spin_unlock_irq(&fsg->lock);
+ break;
+
+ case FSG_STATE_RESET:
+ /* really not much to do here */
+ break;
+
+ case FSG_STATE_CONFIG_CHANGE:
+ rc = do_set_config(fsg, new_config);
+ if (new_config == 0) {
+ /* We're using the backing file */
+ down_read(&fsg->filesem);
+ fsync_all(fsg);
+ up_read(&fsg->filesem);
+ }
+ break;
+
+ case FSG_STATE_EXIT:
+ case FSG_STATE_TERMINATED:
+ if (new_config) {
+ fsg->new_config = 0;
+ do_set_interface(fsg, -1);
+ }
+ do_set_config(fsg, 0); /* Free resources */
+ spin_lock_irq(&fsg->lock);
+ fsg->state = FSG_STATE_TERMINATED; /* Stop the thread */
+ spin_unlock_irq(&fsg->lock);
+ break;
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_main_thread(void *fsg_)
+{
+ struct fsg_dev *fsg = fsg_;
+
+ /* Allow the thread to be killed by a signal, but set the signal mask
+ * to block everything but INT, TERM, KILL, and USR1. */
+ allow_signal(SIGINT);
+ allow_signal(SIGTERM);
+ allow_signal(SIGKILL);
+ allow_signal(SIGUSR1);
+
+ /* Allow the thread to be frozen */
+ set_freezable();
+
+ /* Arrange for userspace references to be interpreted as kernel
+ * pointers. That way we can pass a kernel pointer to a routine
+ * that expects a __user pointer and it will work okay. */
+ set_fs(get_ds());
+
+ /* The main loop */
+ while (fsg->state != FSG_STATE_TERMINATED) {
+ if (exception_in_progress(fsg) || signal_pending(current)) {
+ handle_exception(fsg);
+ continue;
+ }
+
+ if (!fsg->running) {
+ sleep_thread(fsg);
+ continue;
+ }
+
+ if (get_next_command(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_DATA_PHASE;
+ spin_unlock_irq(&fsg->lock);
+
+ if (do_scsi_command(fsg) || finish_reply(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_STATUS_PHASE;
+ spin_unlock_irq(&fsg->lock);
+
+ if (send_status(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_IDLE;
+ spin_unlock_irq(&fsg->lock);
+ }
+
+ spin_lock_irq(&fsg->lock);
+ fsg->thread_task = NULL;
+ spin_unlock_irq(&fsg->lock);
+
+ /* In case we are exiting because of a signal, unregister the
+ * gadget driver and close the backing file. */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
+ close_all_backing_files(fsg);
+
+ /* Let the unbind and cleanup routines know the thread has exited */
+ complete_and_exit(&fsg->thread_notifier, 0);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing. */
+
+static int open_backing_file(struct fsg_dev *fsg, struct lun *curlun,
+ const char *filename)
+{
+ int ro;
+ struct file *filp = NULL;
+ int rc = -EINVAL;
+ struct inode *inode = NULL;
+ loff_t size;
+ loff_t num_sectors;
+
+ /* R/W if we can, R/O if we must */
+ ro = curlun->ro;
+ if (!ro) {
+ filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
+ if (-EROFS == PTR_ERR(filp))
+ ro = 1;
+ }
+ if (ro)
+ filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
+ if (IS_ERR(filp)) {
+ LINFO(curlun, "unable to open backing file: %s\n", filename);
+ return PTR_ERR(filp);
+ }
+
+ if (!(filp->f_mode & FMODE_WRITE))
+ ro = 1;
+
+ if (filp->f_path.dentry)
+ inode = filp->f_path.dentry->d_inode;
+ if (inode && S_ISBLK(inode->i_mode)) {
+ if (bdev_read_only(inode->i_bdev))
+ ro = 1;
+ } else if (!inode || !S_ISREG(inode->i_mode)) {
+ LINFO(curlun, "invalid file type: %s\n", filename);
+ goto out;
+ }
+
+ /* If we can't read the file, it's no good.
+ * If we can't write the file, use it read-only. */
+ if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) {
+ LINFO(curlun, "file not readable: %s\n", filename);
+ goto out;
+ }
+ if (!(filp->f_op->write || filp->f_op->aio_write))
+ ro = 1;
+
+ size = i_size_read(inode->i_mapping->host);
+ if (size < 0) {
+ LINFO(curlun, "unable to find file size: %s\n", filename);
+ rc = (int) size;
+ goto out;
+ }
+ num_sectors = size >> 9; /* File size in 512-byte sectors */
+ if (num_sectors == 0) {
+ LINFO(curlun, "file too small: %s\n", filename);
+ rc = -ETOOSMALL;
+ goto out;
+ }
+
+ get_file(filp);
+ curlun->ro = ro;
+ curlun->filp = filp;
+ curlun->file_length = size;
+ curlun->num_sectors = num_sectors;
+ LDBG(curlun, "open backing file: %s size: %lld num_sectors: %lld\n",
+ filename, size, num_sectors);
+ rc = 0;
+ adjust_wake_lock(fsg);
+
+out:
+ filp_close(filp, current->files);
+ return rc;
+}
+
+
+static void close_backing_file(struct fsg_dev *fsg, struct lun *curlun)
+{
+ if (curlun->filp) {
+ int rc;
+
+ /*
+ * XXX: San: Ugly hack here added to ensure that
+ * our pages get synced to disk.
+ * Also drop caches here just to be extra-safe
+ */
+ rc = vfs_fsync(curlun->filp, 1);
+ if (rc < 0)
+ printk(KERN_ERR "ums: Error syncing data (%d)\n", rc);
+ /* drop_pagecache and drop_slab are no longer available */
+ /* drop_pagecache(); */
+ /* drop_slab(); */
+
+ LDBG(curlun, "close backing file\n");
+ fput(curlun->filp);
+ curlun->filp = NULL;
+ adjust_wake_lock(fsg);
+ }
+}
+
+static void close_all_backing_files(struct fsg_dev *fsg)
+{
+ int i;
+
+ for (i = 0; i < fsg->nluns; ++i)
+ close_backing_file(fsg, &fsg->luns[i]);
+}
+
+static ssize_t show_file(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lun *curlun = dev_to_lun(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
+ char *p;
+ ssize_t rc;
+
+ down_read(&fsg->filesem);
+ if (backing_file_is_open(curlun)) { /* Get the complete pathname */
+ p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1);
+ if (IS_ERR(p))
+ rc = PTR_ERR(p);
+ else {
+ rc = strlen(p);
+ memmove(buf, p, rc);
+ buf[rc] = '\n'; /* Add a newline */
+ buf[++rc] = 0;
+ }
+ } else { /* No file, return 0 bytes */
+ *buf = 0;
+ rc = 0;
+ }
+ up_read(&fsg->filesem);
+ return rc;
+}
+
+static ssize_t store_file(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lun *curlun = dev_to_lun(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
+ int rc = 0;
+
+ DBG(fsg, "store_file: \"%s\"\n", buf);
+#if 0
+ /* disabled because we need to allow closing the backing file if the media was removed */
+ if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) {
+ LDBG(curlun, "eject attempt prevented\n");
+ return -EBUSY; /* "Door is locked" */
+ }
+#endif
+
+ /* Remove a trailing newline */
+ if (count > 0 && buf[count-1] == '\n')
+ ((char *) buf)[count-1] = 0;
+
+ /* Eject current medium */
+ down_write(&fsg->filesem);
+ if (backing_file_is_open(curlun)) {
+ close_backing_file(fsg, curlun);
+ curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+ }
+
+ /* Load new medium */
+ if (count > 0 && buf[0]) {
+ rc = open_backing_file(fsg, curlun, buf);
+ if (rc == 0)
+ curlun->unit_attention_data =
+ SS_NOT_READY_TO_READY_TRANSITION;
+ }
+ up_write(&fsg->filesem);
+ return (rc < 0 ? rc : count);
+}
+
+
+static DEVICE_ATTR(file, 0444, show_file, store_file);
+
+/*-------------------------------------------------------------------------*/
+
+static void fsg_release(struct kref *ref)
+{
+ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref);
+
+ kfree(fsg->luns);
+ kfree(fsg);
+}
+
+static void lun_release(struct device *dev)
+{
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
+
+ kref_put(&fsg->ref, fsg_release);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int __init fsg_alloc(void)
+{
+ struct fsg_dev *fsg;
+
+ fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
+ if (!fsg)
+ return -ENOMEM;
+ spin_lock_init(&fsg->lock);
+ init_rwsem(&fsg->filesem);
+ kref_init(&fsg->ref);
+ init_completion(&fsg->thread_notifier);
+
+ the_fsg = fsg;
+ return 0;
+}
+
+static ssize_t print_switch_name(struct switch_dev *sdev, char *buf)
+{
+ return sprintf(buf, "%s\n", DRIVER_NAME);
+}
+
+static ssize_t print_switch_state(struct switch_dev *sdev, char *buf)
+{
+ struct fsg_dev *fsg = container_of(sdev, struct fsg_dev, sdev);
+ return sprintf(buf, "%s\n", (fsg->config ? "online" : "offline"));
+}
+
+static void
+fsg_function_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct fsg_dev *fsg = func_to_dev(f);
+ int i;
+ struct lun *curlun;
+
+ DBG(fsg, "fsg_function_unbind\n");
+ clear_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Unregister the sysfs attribute files and the LUNs */
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ if (curlun->registered) {
+ device_remove_file(&curlun->dev, &dev_attr_file);
+ device_unregister(&curlun->dev);
+ curlun->registered = 0;
+ }
+ }
+
+ /* If the thread isn't already dead, tell it to exit now */
+ if (fsg->state != FSG_STATE_TERMINATED) {
+ raise_exception(fsg, FSG_STATE_EXIT);
+ wait_for_completion(&fsg->thread_notifier);
+
+ /* The cleanup routine waits for this completion also */
+ complete(&fsg->thread_notifier);
+ }
+
+ /* Free the data buffers */
+ for (i = 0; i < NUM_BUFFERS; ++i)
+ kfree(fsg->buffhds[i].buf);
+ switch_dev_unregister(&fsg->sdev);
+}
+
+static int __init
+fsg_function_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct fsg_dev *fsg = func_to_dev(f);
+ int rc;
+ int i;
+ int id;
+ struct lun *curlun;
+ struct usb_ep *ep;
+ char *pathbuf, *p;
+
+ fsg->cdev = cdev;
+ DBG(fsg, "fsg_function_bind\n");
+
+ dev_attr_file.attr.mode = 0644;
+
+ /* Find out how many LUNs there should be */
+ i = fsg->nluns;
+ if (i == 0)
+ i = 1;
+ if (i > MAX_LUNS) {
+ ERROR(fsg, "invalid number of LUNs: %d\n", i);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Create the LUNs, open their backing files, and register the
+ * LUN devices in sysfs. */
+ fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL);
+ if (!fsg->luns) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ fsg->nluns = i;
+
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ curlun->ro = 0;
+ curlun->dev.release = lun_release;
+ /* use "usb_mass_storage" platform device as parent if available */
+ if (fsg->pdev)
+ curlun->dev.parent = &fsg->pdev->dev;
+ else
+ curlun->dev.parent = &cdev->gadget->dev;
+ dev_set_drvdata(&curlun->dev, fsg);
+ snprintf(curlun->dev.bus_id, BUS_ID_SIZE,
+ "lun%d", i);
+
+ rc = device_register(&curlun->dev);
+ if (rc != 0) {
+ INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
+ goto out;
+ }
+ rc = device_create_file(&curlun->dev, &dev_attr_file);
+ if (rc != 0) {
+ ERROR(fsg, "device_create_file failed: %d\n", rc);
+ device_unregister(&curlun->dev);
+ goto out;
+ }
+ curlun->registered = 1;
+ kref_get(&fsg->ref);
+ }
+
+ /* allocate interface ID(s) */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ intf_desc.bInterfaceNumber = id;
+
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_bulk_in_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg; /* claim the endpoint */
+ fsg->bulk_in = ep;
+
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_bulk_out_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg; /* claim the endpoint */
+ fsg->bulk_out = ep;
+
+ rc = -ENOMEM;
+
+ if (gadget_is_dualspeed(cdev->gadget)) {
+ /* Assume endpoint addresses are the same for both speeds */
+ hs_bulk_in_desc.bEndpointAddress =
+ fs_bulk_in_desc.bEndpointAddress;
+ hs_bulk_out_desc.bEndpointAddress =
+ fs_bulk_out_desc.bEndpointAddress;
+
+ f->hs_descriptors = hs_function;
+ }
+
+ /* Allocate the data buffers */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ /* Allocate for the bulk-in endpoint. We assume that
+ * the buffer will also work with the bulk-out (and
+ * interrupt-in) endpoint. */
+ bh->buf = kmalloc(fsg->buf_size, GFP_KERNEL);
+ if (!bh->buf)
+ goto out;
+ bh->next = bh + 1;
+ }
+ fsg->buffhds[NUM_BUFFERS - 1].next = &fsg->buffhds[0];
+
+ fsg->thread_task = kthread_create(fsg_main_thread, fsg,
+ shortname);
+ if (IS_ERR(fsg->thread_task)) {
+ rc = PTR_ERR(fsg->thread_task);
+ ERROR(fsg, "kthread_create failed: %d\n", rc);
+ goto out;
+ }
+
+ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
+
+ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ if (backing_file_is_open(curlun)) {
+ p = NULL;
+ if (pathbuf) {
+ p = d_path(&curlun->filp->f_path,
+ pathbuf, PATH_MAX);
+ if (IS_ERR(p))
+ p = NULL;
+ }
+ LINFO(curlun, "ro=%d, file: %s\n",
+ curlun->ro, (p ? p : "(error)"));
+ }
+ }
+ kfree(pathbuf);
+
+ set_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Tell the thread to start working */
+ wake_up_process(fsg->thread_task);
+ return 0;
+
+autoconf_fail:
+ ERROR(fsg, "unable to autoconfigure all endpoints\n");
+ rc = -ENOTSUPP;
+
+out:
+ DBG(fsg, "fsg_function_bind failed: %d\n", rc);
+ fsg->state = FSG_STATE_TERMINATED; /* The thread is dead */
+ fsg_function_unbind(c, f);
+ close_all_backing_files(fsg);
+ return rc;
+}
+
+static int fsg_function_set_alt(struct usb_function *f,
+ unsigned intf, unsigned alt)
+{
+ struct fsg_dev *fsg = func_to_dev(f);
+ DBG(fsg, "fsg_function_set_alt intf: %d alt: %d\n", intf, alt);
+ fsg->new_config = 1;
+ do_set_interface(fsg, 0);
+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
+ return 0;
+}
+
+static void fsg_function_disable(struct usb_function *f)
+{
+ struct fsg_dev *fsg = func_to_dev(f);
+ DBG(fsg, "fsg_function_disable\n");
+ if (fsg->new_config)
+ do_set_interface(fsg, -1);
+ fsg->new_config = 0;
+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
+}
+
+static int __init fsg_probe(struct platform_device *pdev)
+{
+ struct usb_mass_storage_platform_data *pdata = pdev->dev.platform_data;
+ struct fsg_dev *fsg = the_fsg;
+
+ fsg->pdev = pdev;
+ printk(KERN_INFO "fsg_probe pdata: %p\n", pdata);
+
+ if (pdata) {
+ if (pdata->vendor)
+ fsg->vendor = pdata->vendor;
+
+ if (pdata->product)
+ fsg->product = pdata->product;
+
+ if (pdata->release)
+ fsg->release = pdata->release;
+ }
+
+ return 0;
+}
+
+static struct platform_driver fsg_platform_driver = {
+ .driver = { .name = "usb_mass_storage", },
+ .probe = fsg_probe,
+};
+
+int __init mass_storage_function_add(struct usb_composite_dev *cdev,
+ struct usb_configuration *c, int nluns)
+{
+ int rc;
+ struct fsg_dev *fsg;
+
+ printk(KERN_INFO "mass_storage_function_add\n");
+ rc = fsg_alloc();
+ if (rc)
+ return rc;
+ fsg = the_fsg;
+ fsg->nluns = nluns;
+
+ spin_lock_init(&fsg->lock);
+ init_rwsem(&fsg->filesem);
+ kref_init(&fsg->ref);
+ init_completion(&fsg->thread_notifier);
+
+ the_fsg->buf_size = BULK_BUFFER_SIZE;
+ the_fsg->sdev.name = DRIVER_NAME;
+ the_fsg->sdev.print_name = print_switch_name;
+ the_fsg->sdev.print_state = print_switch_state;
+ rc = switch_dev_register(&the_fsg->sdev);
+ if (rc < 0)
+ goto err_switch_dev_register;
+
+ rc = platform_driver_register(&fsg_platform_driver);
+ if (rc != 0)
+ goto err_platform_driver_register;
+
+ wake_lock_init(&the_fsg->wake_lock, WAKE_LOCK_SUSPEND,
+ "usb_mass_storage");
+
+ fsg->cdev = cdev;
+ fsg->function.name = shortname;
+ fsg->function.descriptors = fs_function;
+ fsg->function.bind = fsg_function_bind;
+ fsg->function.unbind = fsg_function_unbind;
+ fsg->function.setup = fsg_function_setup;
+ fsg->function.set_alt = fsg_function_set_alt;
+ fsg->function.disable = fsg_function_disable;
+
+ rc = usb_add_function(c, &fsg->function);
+ if (rc != 0)
+ goto err_usb_add_function;
+
+
+ return 0;
+
+err_usb_add_function:
+ wake_lock_destroy(&the_fsg->wake_lock);
+ platform_driver_unregister(&fsg_platform_driver);
+err_platform_driver_register:
+ switch_dev_unregister(&the_fsg->sdev);
+err_switch_dev_register:
+ kref_put(&the_fsg->ref, fsg_release);
+
+ return rc;
+}
+
+
diff --git a/include/linux/usb/android.h b/include/linux/usb/android.h
new file mode 100644
index 0000000..4e7f419
--- /dev/null
+++ b/include/linux/usb/android.h
@@ -0,0 +1,50 @@
+/*
+ * Platform data for Android USB
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __LINUX_USB_ANDROID_H
+#define __LINUX_USB_ANDROID_H
+
+struct android_usb_platform_data {
+ /* USB device descriptor fields */
+ __u16 vendor_id;
+
+ /* Default product ID. */
+ __u16 product_id;
+
+ /* Product ID when adb is enabled. */
+ __u16 adb_product_id;
+
+ __u16 version;
+
+ char *product_name;
+ char *manufacturer_name;
+ char *serial_number;
+
+ /* number of LUNS for mass storage function */
+ int nluns;
+};
+
+/* Platform data for "usb_mass_storage" driver.
+ * Contains values for the SC_INQUIRY SCSI command. */
+struct usb_mass_storage_platform_data {
+ char *vendor;
+ char *product;
+ int release;
+};
+
+extern void android_usb_set_connected(int on);
+
+#endif /* __LINUX_USB_ANDROID_H */
