| /* |
| * Machine specific calibrate_tsc() for generic. |
| * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp> |
| */ |
| /* ------ Calibrate the TSC ------- |
| * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). |
| * Too much 64-bit arithmetic here to do this cleanly in C, and for |
| * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) |
| * output busy loop as low as possible. We avoid reading the CTC registers |
| * directly because of the awkward 8-bit access mechanism of the 82C54 |
| * device. |
| */ |
| #ifndef _MACH_TIMER_H |
| #define _MACH_TIMER_H |
| |
| #define CALIBRATE_TIME_MSEC 30 /* 30 msecs */ |
| #define CALIBRATE_LATCH \ |
| ((CLOCK_TICK_RATE * CALIBRATE_TIME_MSEC + 1000/2)/1000) |
| |
| static inline void mach_prepare_counter(void) |
| { |
| /* Set the Gate high, disable speaker */ |
| outb((inb(0x61) & ~0x02) | 0x01, 0x61); |
| |
| /* |
| * Now let's take care of CTC channel 2 |
| * |
| * Set the Gate high, program CTC channel 2 for mode 0, |
| * (interrupt on terminal count mode), binary count, |
| * load 5 * LATCH count, (LSB and MSB) to begin countdown. |
| * |
| * Some devices need a delay here. |
| */ |
| outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */ |
| outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */ |
| outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */ |
| } |
| |
| static inline void mach_countup(unsigned long *count_p) |
| { |
| unsigned long count = 0; |
| do { |
| count++; |
| } while ((inb_p(0x61) & 0x20) == 0); |
| *count_p = count; |
| } |
| |
| #endif /* !_MACH_TIMER_H */ |
