| |
| /* ----------------------------------------------------------------------------------------------------------- |
| Software License for The Fraunhofer FDK AAC Codec Library for Android |
| |
| © Copyright 1995 - 2012 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. |
| All rights reserved. |
| |
| 1. INTRODUCTION |
| The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements |
| the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. |
| This FDK AAC Codec software is intended to be used on a wide variety of Android devices. |
| |
| AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual |
| audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by |
| independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part |
| of the MPEG specifications. |
| |
| Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) |
| may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners |
| individually for the purpose of encoding or decoding bit streams in products that are compliant with |
| the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license |
| these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec |
| software may already be covered under those patent licenses when it is used for those licensed purposes only. |
| |
| Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, |
| are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional |
| applications information and documentation. |
| |
| 2. COPYRIGHT LICENSE |
| |
| Redistribution and use in source and binary forms, with or without modification, are permitted without |
| payment of copyright license fees provided that you satisfy the following conditions: |
| |
| You must retain the complete text of this software license in redistributions of the FDK AAC Codec or |
| your modifications thereto in source code form. |
| |
| You must retain the complete text of this software license in the documentation and/or other materials |
| provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. |
| You must make available free of charge copies of the complete source code of the FDK AAC Codec and your |
| modifications thereto to recipients of copies in binary form. |
| |
| The name of Fraunhofer may not be used to endorse or promote products derived from this library without |
| prior written permission. |
| |
| You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec |
| software or your modifications thereto. |
| |
| Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software |
| and the date of any change. For modified versions of the FDK AAC Codec, the term |
| "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term |
| "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." |
| |
| 3. NO PATENT LICENSE |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, |
| ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with |
| respect to this software. |
| |
| You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized |
| by appropriate patent licenses. |
| |
| 4. DISCLAIMER |
| |
| This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors |
| "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties |
| of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
| CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, |
| including but not limited to procurement of substitute goods or services; loss of use, data, or profits, |
| or business interruption, however caused and on any theory of liability, whether in contract, strict |
| liability, or tort (including negligence), arising in any way out of the use of this software, even if |
| advised of the possibility of such damage. |
| |
| 5. CONTACT INFORMATION |
| |
| Fraunhofer Institute for Integrated Circuits IIS |
| Attention: Audio and Multimedia Departments - FDK AAC LL |
| Am Wolfsmantel 33 |
| 91058 Erlangen, Germany |
| |
| www.iis.fraunhofer.de/amm |
| amm-info@iis.fraunhofer.de |
| ----------------------------------------------------------------------------------------------------------- */ |
| |
| /************************ Fraunhofer IIS SBR decoder library ****************** |
| |
| Author(s): |
| Description: SBR decoder front-end prototypes and definitions. |
| |
| ******************************************************************************/ |
| |
| #ifndef __SBRDECODER_H |
| #define __SBRDECODER_H |
| |
| #include "common_fix.h" |
| |
| #include "FDK_bitstream.h" |
| #include "FDK_audio.h" |
| |
| |
| #define SBR_DEBUG_EXTHLP "\ |
| --- SBR ---\n\ |
| 0x00000010 Ancillary data and SBR-Header\n\ |
| 0x00000020 SBR-Side info\n\ |
| 0x00000040 Decoded SBR-bitstream data, e.g. envelope data\n\ |
| 0x00000080 SBR-Bitstream statistics\n\ |
| 0x00000100 Miscellaneous SBR-messages\n\ |
| 0x00000200 SBR-Energies and gains in the adjustor\n\ |
| 0x00000400 Fatal SBR errors\n\ |
| 0x00000800 Transposer coefficients for inverse filtering\n\ |
| " |
| |
| /* Capability flags */ |
| #define CAPF_SBR_LP 0x00000001 /*!< Flag indicating library's capability of Low Power mode. */ |
| #define CAPF_SBR_HQ 0x00000002 /*!< Flag indicating library's capability of High Quality mode. */ |
| #define CAPF_SBR_DRM_BS 0x00000004 /*!< Flag indicating library's capability to decode DRM SBR data. */ |
| #define CAPF_SBR_CONCEALMENT 0x00000008 /*!< Flag indicating library's capability to conceal erroneous frames. */ |
| #define CAPF_SBR_DRC 0x00000010 /*!< Flag indicating library's capability for Dynamic Range Control. */ |
| #define CAPF_SBR_PS_MPEG 0x00000020 /*!< Flag indicating library's capability to do MPEG Parametric Stereo. */ |
| #define CAPF_SBR_PS_DRM 0x00000040 /*!< Flag indicating library's capability to do DRM Parametric Stereo. */ |
| |
| typedef enum |
| { |
| SBRDEC_OK = 0, /*!< All fine. */ |
| /* SBRDEC_CONCEAL, */ |
| /* SBRDEC_NOSYNCH, */ |
| /* SBRDEC_ILLEGAL_PROGRAM, */ |
| /* SBRDEC_ILLEGAL_TAG, */ |
| /* SBRDEC_ILLEGAL_CHN_CONFIG, */ |
| /* SBRDEC_ILLEGAL_SECTION, */ |
| /* SBRDEC_ILLEGAL_SCFACTORS, */ |
| /* SBRDEC_ILLEGAL_PULSE_DATA, */ |
| /* SBRDEC_MAIN_PROFILE_NOT_IMPLEMENTED, */ |
| /* SBRDEC_GC_NOT_IMPLEMENTED, */ |
| /* SBRDEC_ILLEGAL_PLUS_ELE_ID, */ |
| SBRDEC_CREATE_ERROR, /*!< */ |
| SBRDEC_NOT_INITIALIZED, /*!< */ |
| SBRDEC_MEM_ALLOC_FAILED, /*!< Memory allocation failed. Probably not enough memory available. */ |
| SBRDEC_PARSE_ERROR, /*!< */ |
| SBRDEC_UNSUPPORTED_CONFIG, /*!< */ |
| SBRDEC_SET_PARAM_FAIL /*!< */ |
| } SBR_ERROR; |
| |
| typedef enum |
| { |
| SBR_SYSTEM_BITSTREAM_DELAY, /*!< System: Switch to enable an additional SBR bitstream delay of one frame. */ |
| SBR_QMF_MODE, /*!< Set QMF mode, either complex or low power. */ |
| SBR_LD_QMF_TIME_ALIGN, /*!< Set QMF type, either LD-MPS or CLDFB. Relevant for ELD streams only. */ |
| SBR_BS_INTERRUPTION /*!< Signal bit stream interruption. Value is ignored. */ |
| } SBRDEC_PARAM; |
| |
| typedef struct SBR_DECODER_INSTANCE *HANDLE_SBRDECODER; |
| |
| |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| |
| /** |
| * \brief Allocates and initializes one SBR decoder instance. |
| * \param pSelf Pointer to where a SBR decoder handle is copied into. |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_Open ( HANDLE_SBRDECODER *pSelf ); |
| |
| /** |
| * \brief Initialize a SBR decoder runtime instance. Must be called before decoding starts. |
| * |
| * \param self Handle to a SBR decoder instance. |
| * \param sampleRateIn Input samplerate of the SBR decoder instance. |
| * \param sampleRateOut Output samplerate of the SBR decoder instance. |
| * \param samplesPerFrame Number of samples per frames. |
| * \param coreCodec Audio Object Type (AOT) of the core codec. |
| * \param elementID Table with MPEG-4 element Ids in canonical order. |
| * \param forceReset Flag that enforces a complete decoder reset. |
| * |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_InitElement ( |
| HANDLE_SBRDECODER self, |
| const int sampleRateIn, |
| const int sampleRateOut, |
| const int samplesPerFrame, |
| const AUDIO_OBJECT_TYPE coreCodec, |
| const MP4_ELEMENT_ID elementID, |
| const int elementIndex |
| ); |
| |
| /** |
| * \brief pass out of band SBR header to SBR decoder |
| * |
| * \param self Handle to a SBR decoder instance. |
| * \param hBs bit stream handle data source. |
| * \param elementID SBR element ID. |
| * \param elementIndex SBR element index. |
| * |
| * \return Error code. |
| */ |
| INT sbrDecoder_Header ( |
| HANDLE_SBRDECODER self, |
| HANDLE_FDK_BITSTREAM hBs, |
| const INT sampleRateIn, |
| const INT sampleRateOut, |
| const INT samplesPerFrame, |
| const AUDIO_OBJECT_TYPE coreCodec, |
| const MP4_ELEMENT_ID elementID, |
| const INT elementIndex |
| ); |
| |
| /** |
| * \brief Set a parameter of the SBR decoder runtime instance. |
| * \param self SBR decoder handle. |
| * \param param Parameter which will be set if successfull. |
| * \param value New parameter value. |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_SetParam ( HANDLE_SBRDECODER self, |
| const SBRDEC_PARAM param, |
| const INT value ); |
| |
| /** |
| * \brief Feed DRC channel data into a SBR decoder runtime instance. |
| * |
| * \param self SBR decoder handle. |
| * \param ch Channel number to which the DRC data is associated to. |
| * \param numBands Number of DRC bands. |
| * \param pNextFact_mag Pointer to a table with the DRC factor magnitudes. |
| * \param nextFact_exp Exponent for all DRC factors. |
| * \param drcInterpolationScheme DRC interpolation scheme. |
| * \param winSequence Window sequence from core coder (eight short or one long window). |
| * \param pBandTop Pointer to a table with the top borders for all DRC bands. |
| * |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_drcFeedChannel ( HANDLE_SBRDECODER self, |
| INT ch, |
| UINT numBands, |
| FIXP_DBL *pNextFact_mag, |
| INT nextFact_exp, |
| SHORT drcInterpolationScheme, |
| UCHAR winSequence, |
| USHORT *pBandTop ); |
| |
| /** |
| * \brief Disable SBR DRC for a certain channel. |
| * |
| * \param hSbrDecoder SBR decoder handle. |
| * \param ch Number of the channel that has to be disabled. |
| * |
| * \return None. |
| */ |
| void sbrDecoder_drcDisable ( HANDLE_SBRDECODER self, |
| INT ch ); |
| |
| |
| /** |
| * \brief Parse one SBR element data extension data block. The bit stream position will |
| * be placed at the end of the SBR payload block. The remaining bits will be returned |
| * into *count if a payload length is given (byPayLen > 0). If no SBR payload length is |
| * given (bsPayLen < 0) then the bit stream position on return will be random after this |
| * function call in case of errors, and any further decoding will be completely pointless. |
| * |
| * \param self SBR decoder handle. |
| * \param hBs Bit stream handle as data source. |
| * \param count Pointer to an integer where the amount of parsed SBR payload bits is stored into. |
| * \param bsPayLen If > 0 this value is the SBR payload length. If < 0, the SBR payload length is unknown. |
| * \param flags CRC flag (0: EXT_SBR_DATA; 1: EXT_SBR_DATA_CRC) |
| * \param prev_element Previous MPEG-4 element ID. |
| * \param element_index Index of the current element. |
| * |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_Parse ( |
| HANDLE_SBRDECODER self, |
| HANDLE_FDK_BITSTREAM hBs, |
| int *count, |
| int bsPayLen, |
| int crcFlag, |
| MP4_ELEMENT_ID prev_element, |
| int element_index, |
| int fGlobalIndependencyFlag |
| ); |
| |
| /** |
| * \brief This function decodes the given SBR bitstreams and applies SBR to the given time data. |
| * |
| * SBR-processing works InPlace. I.e. the calling function has to provide |
| * a time domain buffer timeData which can hold the completely decoded |
| * result. |
| * |
| * Left and right channel are read and stored according to the |
| * interleaving flag, frame length and number of channels. |
| * |
| * \param self Handle of an open SBR decoder instance. |
| * \param hSbrBs SBR Bitstream handle. |
| * \param timeData Pointer to input and finally upsampled output data. |
| * \param numChannels Pointer to a buffer holding the number of channels in time data buffer. |
| * \param sampleRate Output samplerate. |
| * \param channelMapping Channel mapping indices. |
| * \param interleaved Flag indicating if time data is stored interleaved (1: Interleaved time data, 0: non-interleaved timedata). |
| * \param coreDecodedOk Flag indicating if the core decoder did not find any error (0: core decoder found errors, 1: no errors). |
| * \param psDecoded Pointer to a buffer holding a flag. Input: PS is possible, Output: PS has been rendered. |
| * |
| * \return Error code. |
| */ |
| SBR_ERROR sbrDecoder_Apply ( HANDLE_SBRDECODER self, |
| INT_PCM *timeData, |
| int *numChannels, |
| int *sampleRate, |
| const UCHAR channelMapping[(6)], |
| const int interleaved, |
| const int coreDecodedOk, |
| UCHAR *psDecoded ); |
| |
| |
| /** |
| * \brief Close SBR decoder instance and free memory. |
| * \param self SBR decoder handle. |
| * \return Error Code. |
| */ |
| SBR_ERROR sbrDecoder_Close ( HANDLE_SBRDECODER *self ); |
| |
| |
| /** |
| * \brief Get SBR decoder library information. |
| * \param info Pointer to a LIB_INFO struct, where library information is written to. |
| * \return 0 on success, -1 if invalid handle or if no free element is available to write information to. |
| */ |
| INT sbrDecoder_GetLibInfo( LIB_INFO *info ); |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
