Source: e2fsprogs
Section: admin
Priority: required
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
ifdef(`UTIL_LINUX_NG',
``Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc], debhelper (>= 7.0), m4, libblkid-dev (>= 2.16), uuid-dev (>= 2.16)
'',
``Build-Depends: texi2html (>= 1.76), gettext, texinfo, dc, pkg-config, dietlibc-dev (>> 0.30) [alpha amd64 arm hppa i386 ia64 powerpc ppc64 s390 sparc], debhelper (>= 7.0), m4
'')dnl
Standards-Version: 3.8.4
Homepage: http://e2fsprogs.sourceforge.net

Package: e2fsck-static
Priority: optional
Depends: ${shlibs:Depends}, ${misc:Depends}
Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static
Architecture: any
Description: statically-linked version of the ext2/ext3/ext4 filesystem checker
 This may be of some help to you if your filesystem gets corrupted enough
 to break the shared libraries used by the dynamically linked checker.
 .
 This binary takes much more space than its dynamic counterpart located
 in e2fsprogs, though.
 .
 You may want to install a statically-linked shell as well, to be able
 to run this program if something like your C library gets corrupted.

Package: libcomerr2
Section: libs
Provides: libcomerr-kth-compat
Depends: ${shlibs:Depends}, ${misc:Depends}
Replaces: e2fsprogs (<< 1.34-1)
Architecture: any
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: comerr-dev
Section: libdevel
Priority: extra
Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends}
Suggests: doc-base
Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3)
Architecture: any
Description: common error description library - headers and static libraries
 libcom_err is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
 .
 This package contains the development environment for the com_err library.

Package: libss2
Section: libs
Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends}
Replaces: e2fsprogs (<< 1.34-1)
Architecture: any
Description: command-line interface parsing library
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 . 
 It was originally inspired by the Multics SubSystem library.

Package: ss-dev
Section: libdevel
Priority: extra
Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends}
Architecture: any
Description: command-line interface parsing library - headers and static libraries
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 . 
 It was originally inspired by the Multics SubSystem library.
 .
 This package contains the development environment for the ss library.
ifdef(`UTIL_LINUX_NG',,``
Package: libuuid1
Section: libs
Depends: passwd, ${shlibs:Depends}, ${misc:Depends}
Recommends: uuid-runtime
Replaces: e2fsprogs (<< 1.34-1)
Architecture: any
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.  

Package: uuid-runtime
Section: libs
Priority: optional
Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends}
Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
Architecture: any
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.  
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUID’s, in a secure and guaranteed-unique fashion, even in the face
 of large numbers of threads trying to grab UUID’s running on
 different CPU’s. It is used by libuuid as well as the uuidgen
 program.

Package: libuuid1-udeb
XC-Package-Type: udeb
Section: debian-installer
Priority: optional
Depends: ${shlibs:Depends}
Architecture: any
Description: stripped down universally unique id library, for debian-installer
 libuuid generates and parses 128-bit universally unique ids (UUIDs).
 See RFC 4122 for more information.
 .
 This is a minimal package for debian-installer.

Package: uuid-dev
Section: libdevel
Priority: extra
Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends}
Replaces: e2fslibs-dev (<< 1.15)
Architecture: any
Description: universally unique id library - headers and static libraries
 libuuid generates and parses 128-bit universally unique ids (UUIDs).
 See RFC 4122 for more information.
 .
 This package contains the development environment for the uuid library.

Package: libblkid1
Section: libs
Depends: ${shlibs:Depends}, ${misc:Depends}
Architecture: any
Description: block device id library
 The blkid library which allows system programs like fsck and 
 mount to quickly and easily find block devices by filesystem UUID and 
 LABEL.  This allows system administrators to avoid specifying 
 filesystems by hard-coded device names, but via a logical naming 
 system instead.

Package: libblkid1-udeb
XC-Package-Type: udeb
Section: debian-installer
Priority: optional
Depends: ${shlibs:Depends}, ${misc:Depends}
Architecture: any
Description: stripped down block device id library, for debian-installer
 The blkid library which allows system programs like fsck and 
 mount to quickly and easily find block devices by filesystem UUID and 
 LABEL.  This allows system administrators to avoid specifiying 
 filesystems by hard-coded device names, but via a logical naming 
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libblkid-dev
Section: libdevel
Priority: extra
Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: block device id library - headers and static libraries
 The blkid library which allows system programs like fsck and 
 mount to quickly and easily find block devices by filesystem UUID and 
 LABEL.  This allows system administrators to avoid specifiying 
 filesystems by hard-coded device names, but via a logical naming 
 system instead.
 .
 This package contains the development environment for the blkid library.
'')dnl

Package: e2fsprogs-udeb
XC-Package-Type: udeb
Section: debian-installer
Priority: optional
Depends: ${shlibs:Depends}, ${misc:Depends}
Architecture: any
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: e2fslibs
Section: libs
Depends: ${shlibs:Depends}, ${misc:Depends}
Replaces: e2fsprogs (<< 1.34-1)
Provides: libext2fs2, libe2p2
Architecture: any
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.

Package: e2fslibs-dev
Section: libdevel
Priority: extra
Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends}
Suggests: doc-base
Provides: ext2fs-dev, e2p-dev
Replaces: libkrb5-dev (<< 1.3)
Architecture: any
Description: ext2/ext3/ext4 file system libraries - headers and static libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains the development environment for the ext2fs and e2p 
 libraries.

Package: e2fsprogs
Essential: yes
ifdef(`UTIL_LINUX_NG',
``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1)
'',
``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}
'')dnl
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Architecture: any
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.

Package: e2fsprogs-dbg
Section: debug
Priority: extra
Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for e2fsprogs
 This package includes the debug information useful for debugging e2fsprogs
 and its libraries, contained in the e2fsprogs and e2fsck-static packages.
 The debug information is used for execution tracing and core
 dump analysis. 
ifdef(`UTIL_LINUX_NG',,``
Package: uuid-runtime-dbg
Section: debug
Priority: extra
Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for uuid-runtime
 This package includes the debug information useful for debugging the
 uuid runtime programs, contained in the uuid-runtime package.
 The debugging information is used for execution tracing and core
 dump analysis.
'')dnl

Package: e2fslibs-dbg
Section: debug
Priority: extra
Depends: e2fslibs (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for e2fslibs
 This package includes the debug information useful for debugging the
 ext2fs and e2p libraries, contained in the e2fslibs package.  The debug
 information is used for execution tracing and core dump analysis.

Package: libcomerr2-dbg
Section: debug
Priority: extra
Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for libcomerr2
 This package includes the debug information useful for debugging the
 com_err library, contained in the libcomerr2 package.  The debugging
 information is used for execution tracing and core dump analysis.

Package: libss2-dbg
Section: debug
Priority: extra
Depends: libss2 (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for libss2
 This package includes the debug information useful for debugging the
 ss library, contained in the libss2 package.  The debug information
 is used for execution tracing and core dump analysis.
ifdef(`UTIL_LINUX_NG',,``
Package: libblkid1-dbg
Section: debug
Priority: extra
Depends: libblkid1 (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for libblkid1
 This package includes the debug information useful for debugging the
 blkid library, contained in the libblkid1 package.  The debug
 information is used for execution tracing and core dump analysis.

Package: libuuid1-dbg
Section: debug
Priority: extra
Depends: libuuid1 (= ${binary:Version}), ${misc:Depends}
Architecture: any
Description: debugging information for libuuid1
 This package includes the debug information useful for debugging the
 UUID library, contained in the libuuid1 package.  The debug
 information is used for execution tracing and core dump analysis.
'')dnl