| # Makefile.in generated by automake 1.10 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # |
| # Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana |
| # University Research and Technology |
| # Corporation. All rights reserved. |
| # Copyright (c) 2004-2005 The University of Tennessee and The University |
| # of Tennessee Research Foundation. All rights |
| # reserved. |
| # Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, |
| # University of Stuttgart. All rights reserved. |
| # Copyright (c) 2004-2005 The Regents of the University of California. |
| # All rights reserved. |
| # Copyright (c) 2006-2009 Cisco Systems, Inc. All rights reserved. |
| # $COPYRIGHT$ |
| # |
| # Additional copyrights may follow |
| # |
| # $HEADER$ |
| # |
| |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = plpa-1.3.2/src/libplpa |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
| $(srcdir)/plpa.h.in $(srcdir)/plpa_config.h.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/plpa-1.3.2/plpa.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h plpa_config.h plpa.h |
| CONFIG_CLEAN_FILES = |
| LTLIBRARIES = $(noinst_LTLIBRARIES) |
| libplpa_included_la_LIBADD = |
| am__objects_1 = plpa_api_probe.lo plpa_dispatch.lo plpa_runtime.lo \ |
| plpa_map.lo |
| am_libplpa_included_la_OBJECTS = $(am__objects_1) |
| libplpa_included_la_OBJECTS = $(am_libplpa_included_la_OBJECTS) |
| DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@ |
| depcomp = $(SHELL) $(top_srcdir)/depcomp |
| am__depfiles_maybe = depfiles |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| SOURCES = $(libplpa_included_la_SOURCES) |
| DIST_SOURCES = $(libplpa_included_la_SOURCES) |
| HEADERS = $(nodist_noinst_HEADERS) |
| ETAGS = etags |
| CTAGS = ctags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LEX = @LEX@ |
| LEXLIB = @LEXLIB@ |
| LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| YACC = @YACC@ |
| YFLAGS = @YFLAGS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| |
| # Note that this file is generated by configure, so we don't want to |
| # ship it in the tarball. Hence the "nodist_" prefixes to the HEADERS |
| # macros, below. |
| public_headers = plpa.h |
| noinst_LTLIBRARIES = libplpa_included.la |
| nodist_noinst_HEADERS = $(public_headers) |
| |
| # The sources |
| plpa_sources = \ |
| plpa_internal.h \ |
| plpa_api_probe.c \ |
| plpa_dispatch.c \ |
| plpa_runtime.c \ |
| plpa_map.c |
| |
| libplpa_included_la_SOURCES = $(plpa_sources) |
| all: plpa_config.h plpa.h |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .lo .o .obj |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu plpa-1.3.2/src/libplpa/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu plpa-1.3.2/src/libplpa/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| plpa_config.h: stamp-h2 |
| @if test ! -f $@; then \ |
| rm -f stamp-h2; \ |
| $(MAKE) $(AM_MAKEFLAGS) stamp-h2; \ |
| else :; fi |
| |
| stamp-h2: $(srcdir)/plpa_config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h2 |
| cd $(top_builddir) && $(SHELL) ./config.status plpa-1.3.2/src/libplpa/plpa_config.h |
| $(srcdir)/plpa_config.h.in: $(am__configure_deps) |
| cd $(top_srcdir) && $(AUTOHEADER) |
| rm -f stamp-h2 |
| touch $@ |
| |
| plpa.h: stamp-h3 |
| @if test ! -f $@; then \ |
| rm -f stamp-h3; \ |
| $(MAKE) $(AM_MAKEFLAGS) stamp-h3; \ |
| else :; fi |
| |
| stamp-h3: $(srcdir)/plpa.h.in $(top_builddir)/config.status |
| @rm -f stamp-h3 |
| cd $(top_builddir) && $(SHELL) ./config.status plpa-1.3.2/src/libplpa/plpa.h |
| |
| distclean-hdr: |
| -rm -f plpa_config.h stamp-h2 plpa.h stamp-h3 |
| |
| clean-noinstLTLIBRARIES: |
| -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) |
| @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ |
| dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
| test "$$dir" != "$$p" || dir=.; \ |
| echo "rm -f \"$${dir}/so_locations\""; \ |
| rm -f "$${dir}/so_locations"; \ |
| done |
| libplpa_included.la: $(libplpa_included_la_OBJECTS) $(libplpa_included_la_DEPENDENCIES) |
| $(LINK) $(libplpa_included_la_OBJECTS) $(libplpa_included_la_LIBADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plpa_api_probe.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plpa_dispatch.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plpa_map.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plpa_runtime.Plo@am__quote@ |
| |
| .c.o: |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< |
| @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c $< |
| |
| .c.obj: |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` |
| @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< |
| @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: $(HEADERS) $(SOURCES) plpa_config.h.in plpa.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) plpa_config.h.in plpa.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: $(HEADERS) $(SOURCES) plpa_config.h.in plpa.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) plpa_config.h.in plpa.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-am |
| all-am: Makefile $(LTLIBRARIES) $(HEADERS) plpa_config.h plpa.h |
| installdirs: |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ |
| mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-hdr distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-am |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-info: install-info-am |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-ps: install-ps-am |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: install-am install-strip |
| |
| .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ |
| clean-libtool clean-noinstLTLIBRARIES ctags distclean \ |
| distclean-compile distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags uninstall uninstall-am |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
