blob: a48fd9faf4bfd4cf8abb8aad6841744df8d6a1fb [file] [log] [blame]
#!/bin/bash
##
## configure.sh
##
## This script is sourced by the main configure script and contains
## utility functions and other common bits that aren't strictly libvpx
## related.
##
## This build system is based in part on the FFmpeg configure script.
##
#
# Logging / Output Functions
#
die_unknown(){
echo "Unknown option \"$1\"."
echo "See $0 --help for available options."
clean_temp_files
exit 1
}
die() {
echo "$@"
echo
echo "Configuration failed. This could reflect a misconfiguration of your"
echo "toolchains, improper options selected, or another problem. If you"
echo "don't see any useful error messages above, the next step is to look"
echo "at the configure error log file ($logfile) to determine what"
echo "configure was trying to do when it died."
clean_temp_files
exit 1
}
log(){
echo "$@" >>$logfile
}
log_file(){
log BEGIN $1
pr -n -t $1 >>$logfile
log END $1
}
log_echo() {
echo "$@"
log "$@"
}
fwrite () {
outfile=$1
shift
echo "$@" >> ${outfile}
}
show_help_pre(){
for opt in ${CMDLINE_SELECT}; do
opt2=`echo $opt | sed -e 's;_;-;g'`
if enabled $opt; then
eval "toggle_${opt}=\"--disable-${opt2}\""
else
eval "toggle_${opt}=\"--enable-${opt2} \""
fi
done
cat <<EOF
Usage: configure [options]
Options:
Build options:
--help print this message
--log=yes|no|FILE file configure log is written to [config.err]
--target=TARGET target platform tuple [generic-gnu]
--cpu=CPU optimize for a specific cpu rather than a family
--extra-cflags=ECFLAGS add ECFLAGS to CFLAGS [$CFLAGS]
${toggle_extra_warnings} emit harmless warnings (always non-fatal)
${toggle_werror} treat warnings as errors, if possible
(not available with all compilers)
${toggle_optimizations} turn on/off compiler optimization flags
${toggle_pic} turn on/off Position Independent Code
${toggle_ccache} turn on/off compiler cache
${toggle_debug} enable/disable debug mode
${toggle_gprof} enable/disable gprof profiling instrumentation
${toggle_gcov} enable/disable gcov coverage instrumentation
Install options:
${toggle_install_docs} control whether docs are installed
${toggle_install_bins} control whether binaries are installed
${toggle_install_libs} control whether libraries are installed
${toggle_install_srcs} control whether sources are installed
EOF
}
show_help_post(){
cat <<EOF
NOTES:
Object files are built at the place where configure is launched.
All boolean options can be negated. The default value is the opposite
of that shown above. If the option --disable-foo is listed, then
the default value for foo is enabled.
Supported targets:
EOF
show_targets ${all_platforms}
echo
exit 1
}
show_targets() {
while [ -n "$*" ]; do
if [ "${1%%-*}" = "${2%%-*}" ]; then
if [ "${2%%-*}" = "${3%%-*}" ]; then
printf " %-24s %-24s %-24s\n" "$1" "$2" "$3"
shift; shift; shift
else
printf " %-24s %-24s\n" "$1" "$2"
shift; shift
fi
else
printf " %-24s\n" "$1"
shift
fi
done
}
show_help() {
show_help_pre
show_help_post
}
#
# List Processing Functions
#
set_all(){
value=$1
shift
for var in $*; do
eval $var=$value
done
}
is_in(){
value=$1
shift
for var in $*; do
[ $var = $value ] && return 0
done
return 1
}
add_cflags() {
CFLAGS="${CFLAGS} $@"
}
add_ldflags() {
LDFLAGS="${LDFLAGS} $@"
}
add_asflags() {
ASFLAGS="${ASFLAGS} $@"
}
add_extralibs() {
extralibs="${extralibs} $@"
}
#
# Boolean Manipulation Functions
#
enable(){
set_all yes $*
}
disable(){
set_all no $*
}
enabled(){
eval test "x\$$1" = "xyes"
}
disabled(){
eval test "x\$$1" = "xno"
}
soft_enable() {
for var in $*; do
if ! disabled $var; then
log_echo " enabling $var"
enable $var
fi
done
}
soft_disable() {
for var in $*; do
if ! enabled $var; then
log_echo " disabling $var"
disable $var
fi
done
}
#
# Text Processing Functions
#
toupper(){
echo "$@" | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ
}
tolower(){
echo "$@" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
}
#
# Temporary File Functions
#
source_path=${0%/*}
enable source_path_used
if test -z "$source_path" -o "$source_path" = "." ; then
source_path="`pwd`"
disable source_path_used
fi
if test ! -z "$TMPDIR" ; then
TMPDIRx="${TMPDIR}"
elif test ! -z "$TEMPDIR" ; then
TMPDIRx="${TEMPDIR}"
else
TMPDIRx="/tmp"
fi
TMP_H="${TMPDIRx}/vpx-conf-$$-${RANDOM}.h"
TMP_C="${TMPDIRx}/vpx-conf-$$-${RANDOM}.c"
TMP_O="${TMPDIRx}/vpx-conf-$$-${RANDOM}.o"
TMP_X="${TMPDIRx}/vpx-conf-$$-${RANDOM}.x"
TMP_ASM="${TMPDIRx}/vpx-conf-$$-${RANDOM}.asm"
clean_temp_files() {
rm -f ${TMP_C} ${TMP_H} ${TMP_O} ${TMP_X} ${TMP_ASM}
}
#
# Toolchain Check Functions
#
check_cmd() {
log "$@"
"$@" >>${logfile} 2>&1
}
check_cc() {
log check_cc "$@"
cat >${TMP_C}
log_file ${TMP_C}
check_cmd ${CC} ${CFLAGS} "$@" -c -o ${TMP_O} ${TMP_C}
}
check_cpp() {
log check_cpp "$@"
cat > ${TMP_C}
log_file ${TMP_C}
check_cmd ${CC} ${CFLAGS} "$@" -E -o ${TMP_O} ${TMP_C}
}
check_ld() {
log check_ld "$@"
check_cc $@ \
&& check_cmd ${LD} ${LDFLAGS} "$@" -o ${TMP_X} ${TMP_O} ${extralibs}
}
check_header(){
log check_header "$@"
header=$1
shift
var=`echo $header | sed 's/[^A-Za-z0-9_]/_/g'`
disable $var
check_cpp "$@" <<EOF && enable $var
#include "$header"
int x;
EOF
}
check_cflags() {
log check_cflags "$@"
check_cc "$@" <<EOF
int x;
EOF
}
check_add_cflags() {
check_cflags "$@" && add_cflags "$@"
}
check_add_asflags() {
log add_asflags "$@"
add_asflags "$@"
}
check_add_ldflags() {
log add_ldflags "$@"
add_ldflags "$@"
}
check_asm_align() {
log check_asm_align "$@"
cat >${TMP_ASM} <<EOF
section .rodata
align 16
EOF
log_file ${TMP_ASM}
check_cmd ${AS} ${ASFLAGS} -o ${TMP_O} ${TMP_ASM}
readelf -WS ${TMP_O} >${TMP_X}
log_file ${TMP_X}
if ! grep -q '\.rodata .* 16$' ${TMP_X}; then
die "${AS} ${ASFLAGS} does not support section alignment (nasm <=2.08?)"
fi
}
write_common_config_banner() {
echo '# This file automatically generated by configure. Do not edit!' > config.mk
echo "TOOLCHAIN := ${toolchain}" >> config.mk
case ${toolchain} in
*-linux-rvct)
echo "ALT_LIBC := ${alt_libc}" >> config.mk
;;
esac
}
write_common_config_targets() {
for t in ${all_targets}; do
if enabled ${t}; then
if enabled universal || enabled child; then
fwrite config.mk "ALL_TARGETS += ${t}-${toolchain}"
else
fwrite config.mk "ALL_TARGETS += ${t}"
fi
fi
true;
done
true
}
write_common_target_config_mk() {
local CC=${CC}
enabled ccache && CC="ccache ${CC}"
cat > $1 << EOF
# This file automatically generated by configure. Do not edit!
SRC_PATH="$source_path"
SRC_PATH_BARE=$source_path
BUILD_PFX=${BUILD_PFX}
TOOLCHAIN=${toolchain}
ASM_CONVERSION=${asm_conversion_cmd:-${source_path}/build/make/ads2gas.pl}
CC=${CC}
AR=${AR}
LD=${LD}
AS=${AS}
STRIP=${STRIP}
NM=${NM}
CFLAGS = ${CFLAGS}
ARFLAGS = -rus\$(if \$(quiet),c,v)
LDFLAGS = ${LDFLAGS}
ASFLAGS = ${ASFLAGS}
extralibs = ${extralibs}
AS_SFX = ${AS_SFX:-.asm}
EOF
if enabled rvct; then cat >> $1 << EOF
fmt_deps = sed -e 's;^__image.axf;\$(dir \$@)\$(notdir \$<).o \$@;' #hide
EOF
else cat >> $1 << EOF
fmt_deps = sed -e 's;^\([a-zA-Z0-9_]*\)\.o;\$(dir \$@)\1\$(suffix \$<).o \$@;'
EOF
fi
print_config_mk ARCH "${1}" ${ARCH_LIST}
print_config_mk HAVE "${1}" ${HAVE_LIST}
print_config_mk CONFIG "${1}" ${CONFIG_LIST}
print_config_mk HAVE "${1}" gnu_strip
enabled msvs && echo "CONFIG_VS_VERSION=${vs_version}" >> "${1}"
}
write_common_target_config_h() {
cat > ${TMP_H} << EOF
/* This file automatically generated by configure. Do not edit! */
#define RESTRICT ${RESTRICT}
EOF
print_config_h ARCH "${TMP_H}" ${ARCH_LIST}
print_config_h HAVE "${TMP_H}" ${HAVE_LIST}
print_config_h CONFIG "${TMP_H}" ${CONFIG_LIST}
mkdir -p `dirname "$1"`
cmp "$1" ${TMP_H} >/dev/null 2>&1 || mv ${TMP_H} "$1"
}
process_common_cmdline() {
for opt in "$@"; do
optval="${opt#*=}"
case "$opt" in
--child) enable child
;;
--log*)
logging="$optval"
if ! disabled logging ; then
enabled logging || logfile="$logging"
else
logfile=/dev/null
fi
;;
--target=*) toolchain="${toolchain:-${optval}}"
;;
--force-target=*) toolchain="${toolchain:-${optval}}"; enable force_toolchain
;;
--cpu)
;;
--cpu=*) tune_cpu="$optval"
;;
--extra-cflags=*)
extra_cflags="${optval}"
;;
--enable-?*|--disable-?*)
eval `echo "$opt" | sed 's/--/action=/;s/-/ option=/;s/-/_/g'`
echo "${CMDLINE_SELECT} ${ARCH_EXT_LIST}" | grep "^ *$option\$" >/dev/null || die_unknown $opt
$action $option
;;
--force-enable-?*|--force-disable-?*)
eval `echo "$opt" | sed 's/--force-/action=/;s/-/ option=/;s/-/_/g'`
$action $option
;;
--libc=*)
[ -d "${optval}" ] || die "Not a directory: ${optval}"
disable builtin_libc
alt_libc="${optval}"
;;
--as=*)
[ "${optval}" = yasm -o "${optval}" = nasm -o "${optval}" = auto ] \
|| die "Must be yasm, nasm or auto: ${optval}"
alt_as="${optval}"
;;
--prefix=*)
prefix="${optval}"
;;
--libdir=*)
libdir="${optval}"
;;
--libc|--as|--prefix|--libdir)
die "Option ${opt} requires argument"
;;
--help|-h) show_help
;;
*) die_unknown $opt
;;
esac
done
}
process_cmdline() {
for opt do
optval="${opt#*=}"
case "$opt" in
*) process_common_cmdline $opt
;;
esac
done
}
post_process_common_cmdline() {
prefix="${prefix:-/usr/local}"
prefix="${prefix%/}"
libdir="${libdir:-${prefix}/lib}"
libdir="${libdir%/}"
if [ "${libdir#${prefix}}" = "${libdir}" ]; then
die "Libdir ${libdir} must be a subdirectory of ${prefix}"
fi
}
post_process_cmdline() {
true;
}
setup_gnu_toolchain() {
CC=${CC:-${CROSS}gcc}
AR=${AR:-${CROSS}ar}
LD=${LD:-${CROSS}${link_with_cc:-ld}}
AS=${AS:-${CROSS}as}
STRIP=${STRIP:-${CROSS}strip}
NM=${NM:-${CROSS}nm}
AS_SFX=.s
}
process_common_toolchain() {
if [ -z "$toolchain" ]; then
gcctarget="$(gcc -dumpmachine 2> /dev/null)"
# detect tgt_isa
case "$gcctarget" in
*x86_64*|*amd64*)
tgt_isa=x86_64
;;
*i[3456]86*)
tgt_isa=x86
;;
*powerpc64*)
tgt_isa=ppc64
;;
*powerpc*)
tgt_isa=ppc32
;;
*sparc*)
tgt_isa=sparc
;;
esac
# detect tgt_os
case "$gcctarget" in
*darwin8*)
tgt_isa=universal
tgt_os=darwin8
;;
*darwin9*)
tgt_isa=universal
tgt_os=darwin9
;;
*darwin10*)
tgt_isa=x86_64
tgt_os=darwin10
;;
*mingw32*|*cygwin*)
[ -z "$tgt_isa" ] && tgt_isa=x86
tgt_os=win32
;;
*linux*|*bsd*)
tgt_os=linux
;;
*solaris2.10)
tgt_os=solaris
;;
esac
if [ -n "$tgt_isa" ] && [ -n "$tgt_os" ]; then
toolchain=${tgt_isa}-${tgt_os}-gcc
fi
fi
toolchain=${toolchain:-generic-gnu}
is_in ${toolchain} ${all_platforms} || enabled force_toolchain \
|| die "Unrecognized toolchain '${toolchain}'"
enabled child || log_echo "Configuring for target '${toolchain}'"
#
# Set up toolchain variables
#
tgt_isa=$(echo ${toolchain} | awk 'BEGIN{FS="-"}{print $1}')
tgt_os=$(echo ${toolchain} | awk 'BEGIN{FS="-"}{print $2}')
tgt_cc=$(echo ${toolchain} | awk 'BEGIN{FS="-"}{print $3}')
# Mark the specific ISA requested as enabled
soft_enable ${tgt_isa}
enable ${tgt_os}
enable ${tgt_cc}
# Enable the architecture family
case ${tgt_isa} in
arm*|iwmmxt*) enable arm;;
mips*) enable mips;;
esac
# PIC is probably what we want when building shared libs
enabled shared && soft_enable pic
# Handle darwin variants
case ${toolchain} in
*-darwin8-*)
add_cflags "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
add_cflags "-mmacosx-version-min=10.4"
add_ldflags "-isysroot /Developer/SDKs/MacOSX10.4u.sdk"
add_ldflags "-mmacosx-version-min=10.4"
;;
*-darwin9-*)
add_cflags "-isysroot /Developer/SDKs/MacOSX10.5.sdk"
add_cflags "-mmacosx-version-min=10.5"
add_ldflags "-isysroot /Developer/SDKs/MacOSX10.5.sdk"
add_ldflags "-mmacosx-version-min=10.5"
;;
*-darwin10-*)
add_cflags "-isysroot /Developer/SDKs/MacOSX10.6.sdk"
add_cflags "-mmacosx-version-min=10.6"
add_ldflags "-isysroot /Developer/SDKs/MacOSX10.6.sdk"
add_ldflags "-mmacosx-version-min=10.6"
;;
esac
# Handle Solaris variants. Solaris 10 needs -lposix4
case ${toolchain} in
sparc-solaris-*)
add_extralibs -lposix4
add_cflags "-DMUST_BE_ALIGNED"
;;
*-solaris-*)
add_extralibs -lposix4
;;
esac
# Process ARM architecture variants
case ${toolchain} in
arm*|iwmmxt*)
# on arm, isa versions are supersets
enabled armv7a && soft_enable armv7 ### DEBUG
enabled armv7 && soft_enable armv6
enabled armv6 && soft_enable armv5te
enabled armv6 && soft_enable fast_unaligned
enabled iwmmxt2 && soft_enable iwmmxt
enabled iwmmxt && soft_enable armv5te
asm_conversion_cmd="cat"
case ${tgt_cc} in
gcc)
if enabled iwmmxt || enabled iwmmxt2
then
CROSS=${CROSS:-arm-iwmmxt-linux-gnueabi-}
elif enabled symbian; then
CROSS=${CROSS:-arm-none-symbianelf-}
else
CROSS=${CROSS:-arm-none-linux-gnueabi-}
fi
link_with_cc=gcc
setup_gnu_toolchain
arch_int=${tgt_isa##armv}
arch_int=${arch_int%%te}
check_add_asflags --defsym ARCHITECTURE=${arch_int}
tune_cflags="-mtune="
if enabled iwmmxt || enabled iwmmxt2
then
check_add_asflags -mcpu=${tgt_isa}
elif enabled armv7
then
check_add_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp #-ftree-vectorize
check_add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp #-march=armv7-a
else
check_add_cflags -march=${tgt_isa}
check_add_asflags -march=${tgt_isa}
fi
enabled debug && add_asflags -g
asm_conversion_cmd="${source_path}/build/make/ads2gas.pl"
;;
rvct)
CC=armcc
AR=armar
AS=armasm
LD=${source_path}/build/make/armlink_adapter.sh
STRIP=arm-none-linux-gnueabi-strip
NM=arm-none-linux-gnueabi-nm
tune_cflags="--cpu="
tune_asflags="--cpu="
if [ -z "${tune_cpu}" ]; then
if enabled armv7
then
check_add_cflags --cpu=Cortex-A8 --fpu=softvfp+vfpv3
check_add_asflags --cpu=Cortex-A8 --fpu=none
else
check_add_cflags --cpu=${tgt_isa##armv}
check_add_asflags --cpu=${tgt_isa##armv}
fi
fi
arch_int=${tgt_isa##armv}
arch_int=${arch_int%%te}
check_add_asflags --pd "\"ARCHITECTURE SETA ${arch_int}\""
enabled debug && add_asflags -g
add_cflags --gnu
add_cflags --enum_is_int
add_cflags --wchar32
;;
esac
case ${tgt_os} in
none*)
disable multithread
disable os_support
;;
darwin*)
SDK_PATH=/Developer/Platforms/iPhoneOS.platform/Developer
TOOLCHAIN_PATH=${SDK_PATH}/usr/bin
CC=${TOOLCHAIN_PATH}/gcc
AR=${TOOLCHAIN_PATH}/ar
LD=${TOOLCHAIN_PATH}/arm-apple-darwin10-gcc-4.2.1
AS=${TOOLCHAIN_PATH}/as
STRIP=${TOOLCHAIN_PATH}/strip
NM=${TOOLCHAIN_PATH}/nm
AS_SFX=.s
# ASFLAGS is written here instead of using check_add_asflags
# because we need to overwrite all of ASFLAGS and purge the
# options that were put in above
ASFLAGS="-version -arch ${tgt_isa} -g"
add_cflags -arch ${tgt_isa}
add_ldflags -arch_only ${tgt_isa}
add_cflags "-isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk"
# This should be overridable
alt_libc=${SDK_PATH}/SDKs/iPhoneOS4.2.sdk
# Add the paths for the alternate libc
# for d in usr/include usr/include/gcc/darwin/4.0/; do
for d in usr/include usr/include/gcc/darwin/4.0/ usr/lib/gcc/arm-apple-darwin10/4.2.1/include/; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_cflags -I"${try_dir}"
done
for d in lib usr/lib; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_ldflags -L"${try_dir}"
done
asm_conversion_cmd="${source_path}/build/make/ads2gas_apple.pl"
;;
linux*)
enable linux
if enabled rvct; then
# Compiling with RVCT requires an alternate libc (glibc) when
# targetting linux.
disabled builtin_libc \
|| die "Must supply --libc when targetting *-linux-rvct"
# Set up compiler
add_cflags --library_interface=aeabi_glibc
add_cflags --no_hide_all
add_cflags --dwarf2
# Set up linker
add_ldflags --sysv --no_startup --no_ref_cpp_init
add_ldflags --entry=_start
add_ldflags --keep '"*(.init)"' --keep '"*(.fini)"'
add_ldflags --keep '"*(.init_array)"' --keep '"*(.fini_array)"'
add_ldflags --dynamiclinker=/lib/ld-linux.so.3
add_extralibs libc.so.6 -lc_nonshared crt1.o crti.o crtn.o
# Add the paths for the alternate libc
for d in usr/include; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_cflags -J"${try_dir}"
done
add_cflags -J"${RVCT31INC}"
for d in lib usr/lib; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_ldflags -L"${try_dir}"
done
# glibc has some struct members named __align, which is a
# storage modifier in RVCT. If we need to use this modifier,
# we'll have to #undef it in our code. Note that this must
# happen AFTER all libc inclues.
add_cflags -D__align=x_align_x
fi
;;
symbian*)
enable symbian
# Add the paths for the alternate libc
for d in include/libc; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_cflags -I"${try_dir}"
done
for d in release/armv5/urel; do
try_dir="${alt_libc}/${d}"
[ -d "${try_dir}" ] && add_ldflags -L"${try_dir}"
done
add_cflags -DIMPORT_C=
esac
;;
mips*)
CROSS=${CROSS:-mipsel-linux-uclibc-}
link_with_cc=gcc
setup_gnu_toolchain
tune_cflags="-mtune="
check_add_cflags -march=${tgt_isa}
check_add_asflags -march=${tgt_isa}
check_add_asflags -KPIC
;;
ppc*)
enable ppc
bits=${tgt_isa##ppc}
link_with_cc=gcc
setup_gnu_toolchain
add_asflags -force_cpusubtype_ALL -I"\$(dir \$<)darwin"
soft_enable altivec
enabled altivec && add_cflags -maltivec
case "$tgt_os" in
linux*)
add_asflags -maltivec -mregnames -I"\$(dir \$<)linux"
;;
darwin*)
darwin_arch="-arch ppc"
enabled ppc64 && darwin_arch="${darwin_arch}64"
add_cflags ${darwin_arch} -m${bits} -fasm-blocks
add_asflags ${darwin_arch} -force_cpusubtype_ALL -I"\$(dir \$<)darwin"
add_ldflags ${darwin_arch} -m${bits}
enabled altivec && add_cflags -faltivec
;;
esac
;;
x86*)
bits=32
enabled x86_64 && bits=64
soft_enable runtime_cpu_detect
soft_enable mmx
soft_enable sse
soft_enable sse2
soft_enable sse3
soft_enable ssse3
soft_enable sse4_1
case ${tgt_os} in
win*)
enabled gcc && add_cflags -fno-common
;;
solaris*)
CC=${CC:-${CROSS}gcc}
LD=${LD:-${CROSS}gcc}
CROSS=${CROSS:-g}
;;
esac
AS="${alt_as:-${AS:-auto}}"
case ${tgt_cc} in
icc*)
CC=${CC:-icc}
LD=${LD:-icc}
setup_gnu_toolchain
add_cflags -use-msasm -use-asm
add_ldflags -i-static
enabled x86_64 && add_cflags -ipo -no-prec-div -static -xSSE2 -axSSE2
enabled x86_64 && AR=xiar
case ${tune_cpu} in
atom*)
tune_cflags="-x"
tune_cpu="SSE3_ATOM"
;;
*)
tune_cflags="-march="
;;
esac
;;
gcc*)
add_cflags -m${bits}
add_ldflags -m${bits}
link_with_cc=gcc
tune_cflags="-march="
setup_gnu_toolchain
;;
esac
case "${AS}" in
auto|"")
which nasm >/dev/null 2>&1 && AS=nasm
which yasm >/dev/null 2>&1 && AS=yasm
[ "${AS}" = auto -o -z "${AS}" ] \
&& die "Neither yasm nor nasm have been found"
;;
esac
log_echo " using $AS"
[ "${AS##*/}" = nasm ] && add_asflags -Ox
AS_SFX=.asm
case ${tgt_os} in
win*)
add_asflags -f win${bits}
enabled debug && add_asflags -g cv8
;;
linux*|solaris*)
add_asflags -f elf${bits}
enabled debug && [ "${AS}" = yasm ] && add_asflags -g dwarf2
enabled debug && [ "${AS}" = nasm ] && add_asflags -g
[ "${AS##*/}" = nasm ] && check_asm_align
;;
darwin*)
add_asflags -f macho${bits}
enabled x86 && darwin_arch="-arch i386" || darwin_arch="-arch x86_64"
add_cflags ${darwin_arch}
add_ldflags ${darwin_arch}
# -mdynamic-no-pic is still a bit of voodoo -- it was required at
# one time, but does not seem to be now, and it breaks some of the
# code that still relies on inline assembly.
# enabled icc && ! enabled pic && add_cflags -fno-pic -mdynamic-no-pic
enabled icc && ! enabled pic && add_cflags -fno-pic
;;
*) log "Warning: Unknown os $tgt_os while setting up $AS flags"
;;
esac
;;
universal*|*-gcc|generic-gnu)
link_with_cc=gcc
enable gcc
setup_gnu_toolchain
;;
esac
# Try to enable CPU specific tuning
if [ -n "${tune_cpu}" ]; then
if [ -n "${tune_cflags}" ]; then
check_add_cflags ${tune_cflags}${tune_cpu} || \
die "Requested CPU '${tune_cpu}' not supported by compiler"
fi
if [ -n "${tune_asflags}" ]; then
check_add_asflags ${tune_asflags}${tune_cpu} || \
die "Requested CPU '${tune_cpu}' not supported by assembler"
fi
if [ -z "${tune_cflags}${tune_asflags}" ]; then
log_echo "Warning: CPU tuning not supported by this toolchain"
fi
fi
enabled debug && check_add_cflags -g && check_add_ldflags -g
enabled gprof && check_add_cflags -pg && check_add_ldflags -pg
enabled gcov &&
check_add_cflags -fprofile-arcs -ftest-coverage &&
check_add_ldflags -fprofile-arcs -ftest-coverage
if enabled optimizations; then
enabled rvct && check_add_cflags -Otime
enabled small && check_add_cflags -O2 || check_add_cflags -O3
fi
# Position Independent Code (PIC) support, for building relocatable
# shared objects
enabled gcc && enabled pic && check_add_cflags -fPIC
# Check for strip utility variant
${STRIP} -V 2>/dev/null | grep GNU >/dev/null && enable gnu_strip
# Try to determine target endianness
check_cc <<EOF
unsigned int e = 'O'<<24 | '2'<<16 | 'B'<<8 | 'E';
EOF
[ -f "${TMP_O}" ] && od -A n -t x1 "${TMP_O}" | tr -d '\n' |
grep '4f *32 *42 *45' >/dev/null 2>&1 && enable big_endian
# Almost every platform uses pthreads.
if enabled multithread; then
case ${toolchain} in
*-win*);;
*) check_header pthread.h && add_extralibs -lpthread
esac
fi
# glibc needs these
if enabled linux; then
add_cflags -D_LARGEFILE_SOURCE
add_cflags -D_FILE_OFFSET_BITS=64
fi
# append any user defined extra cflags
if [ -n "${extra_cflags}" ] ; then
check_add_cflags ${extra_cflags} || \
die "Requested extra CFLAGS '${extra_cflags}' not supported by compiler"
fi
}
process_toolchain() {
process_common_toolchain
}
print_config_mk() {
local prefix=$1
local makefile=$2
shift 2
for cfg; do
upname="`toupper $cfg`"
if enabled $cfg; then
echo "${prefix}_${upname}=yes" >> $makefile
fi
done
}
print_config_h() {
local prefix=$1
local header=$2
shift 2
for cfg; do
upname="`toupper $cfg`"
if enabled $cfg; then
echo "#define ${prefix}_${upname} 1" >> $header
else
echo "#define ${prefix}_${upname} 0" >> $header
fi
done
}
process_targets() {
true;
}
process_detect() {
true;
}
enable logging
logfile="config.err"
self=$0
process() {
cmdline_args="$@"
process_cmdline "$@"
if enabled child; then
echo "# ${self} $@" >> ${logfile}
else
echo "# ${self} $@" > ${logfile}
fi
post_process_common_cmdline
post_process_cmdline
process_toolchain
process_detect
process_targets
OOT_INSTALLS="${OOT_INSTALLS}"
if enabled source_path_used; then
# Prepare the PWD for building.
for f in ${OOT_INSTALLS}; do
install -D ${source_path}/$f $f
done
fi
cp ${source_path}/build/make/Makefile .
clean_temp_files
true
}