PM-QA: remove obsolete test scripts
The updated version of these test scripts are
available in their respective directories.
Signed-off-by: Rajagopal Venkat <rajagopal.venkat@linaro.org>
diff --git a/run_template b/run_template
deleted file mode 100644
index 8c866f9..0000000
--- a/run_template
+++ /dev/null
@@ -1,7 +0,0 @@
-pm-qa-cexists proof_o_concept PM-list_c_states.sh
-pm-qa-pexists proof_o_concept PM-list_p_states.sh
-pm-qa-availfreq01 cpufreq avail_freq01.sh
-pm-qa-availfreq02 cpufreq avail_freq02.sh
-pm-qa-availgov01 cpufreq avail_gov01.sh
-pm-qa-availgov02 cpufreq avail_gov02.sh
-pm-qa-cpuidle cpuidle test_usb_cpuidle /dev/sdb 5 10000
diff --git a/testcases.awk b/testcases.awk
deleted file mode 100644
index 71ce9ee..0000000
--- a/testcases.awk
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # For a series of power management related test, cycle through and
- # execute. Each test to be executed is in file testcases where the
- # following columns make sense....
- # column 1: name of the test case
- # column 2: sub directory housing the test
- # column 3: name of file for the test case
- # column 4: from column 4 onwards, any arguments to pass on to the test
-###
-{
- printf $1 ": "
- cmd = "cd ./testcases/"$2 " ; sudo ./"$3 " " substr($0, length($1 $2 $3) +4)
- system(cmd)
- printf "\n"
-}
-
diff --git a/testcases/Makefile b/testcases/Makefile
deleted file mode 100644
index 08b3233..0000000
--- a/testcases/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-tmp := $(shell find -maxdepth 2 -mindepth 2 -name Makefile)
-paths := $(subst Makefile, ,$(tmp))
-SUBDIRS := $(subst ./, ,$(paths))
-
-.PHONY: $(SUBDIRS)
-
-all:
- @for X in $(SUBDIRS) ; do $(MAKE) -C $$X all ; done;
-
-
-clean:
- @for X in $(SUBDIRS) ; do $(MAKE) -C $$X clean; done;
-
-
-
diff --git a/testcases/cpufreq/Makefile b/testcases/cpufreq/Makefile
deleted file mode 100644
index 65afd9a..0000000
--- a/testcases/cpufreq/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-testcases = avail_freq01.sh avail_freq02.sh avail_gov01.sh avail_gov02.sh
-
-all:
- @for t in $(testcases) ; do chmod +x $$t; done;
-
-clean:
- @for t in $(testcases) ; do chmod -x $$t; done;
diff --git a/testcases/cpufreq/avail_freq01.sh b/testcases/cpufreq/avail_freq01.sh
deleted file mode 100755
index 1809e46..0000000
--- a/testcases/cpufreq/avail_freq01.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-# Description : We are checking the frequency scaling file system is
-# available. This test checks we have the framework to run the other
-# tests in order to test the ability to monitor and/or alter cpu
-# frequency on the board, let's assure the basic files are there.
-
-CPU_PATH="/sys/devices/system/cpu"
-
-check_freq() {
- if [ ! -f $CPU_PATH/$1/cpufreq/scaling_available_frequencies ] ; then
- echo "NA no added frequencies"
- return 1;
- fi
-
- if [ ! -f $CPU_PATH/$1/cpufreq/scaling_cur_freq ] ; then
- echo "missing current frequency file"
- return 1;
- fi
-
- if [ ! -f $CPU_PATH/$1/cpufreq/scaling_setspeed ] ; then
- echo "missing file to set frequency speed"
- return 1;
- fi
-
- echo "PASS `cat $CPU_PATH/$1/cpufreq/scaling_available_frequencies `"
- return 0;
-}
-
-for i in $(ls $CPU_PATH | grep "cpu[0-9].*"); do
- check_freq $i
-done
-
diff --git a/testcases/cpufreq/avail_freq02.sh b/testcases/cpufreq/avail_freq02.sh
deleted file mode 100755
index b012317..0000000
--- a/testcases/cpufreq/avail_freq02.sh
+++ /dev/null
@@ -1,68 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # Track how much time it takes to cycle through a loop 1000 times at this current frequency
-###
-loop_it() {
- LOOP_LIMIT=1000
- time while ( test $LOOP_LIMIT -ge 1 ); do
- LOOP_LIMIT=$(( $LOOP_LIMIT - 1 ))
- done
-}
-
-
-###
- # set governor to be user space governor which allows you to manually alter the frequency
-###
-echo "userspace" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
-if [ $? != 0 ]; then
- echo "FAIL could not change governor to userspace, remained `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor`"
- exit -1
-fi
-
-
-###
- # Now loop through, changing the cpu frequency to available frequencies. Sleep for a
- # period of about 5 seconds each time it's set to a new frequency to allow the system
- # to settle down.
-###
-for LOOP_FREQ in `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies`
-do
- echo $LOOP_FREQ > /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed
- if [ $? != 0 ]; then
- echo "FAIL could not write freq for $LOOP_FREQ"
- exit -1
- fi
- sleep 5
- if [ `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq` != $LOOP_FREQ ]; then
- echo "FAIL could not change freq to $LOOP_FREQ remained `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq`"
- exit -1
- fi
- loop_it
-done
-
-echo PASS
-
diff --git a/testcases/cpufreq/avail_gov01.sh b/testcases/cpufreq/avail_gov01.sh
deleted file mode 100755
index d2c8f1c..0000000
--- a/testcases/cpufreq/avail_gov01.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # Simple test to assure governor support for cpu frequency altering is possible.
- # Assure the files are available that allow you to switch between governors.
-###
-if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
- if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ] ; then
- echo "NA no added frequencies"
- exit -1;
- fi
- if [ ! -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ] ; then
- echo "FAIL missing scaling governor file"
- exit -1;
- fi
- echo "PASS `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors `"
- exit 0;
-else
- echo "NA no added frequencies"
- exit -1;
-fi
-
diff --git a/testcases/cpufreq/avail_gov02.sh b/testcases/cpufreq/avail_gov02.sh
deleted file mode 100755
index 3e07d80..0000000
--- a/testcases/cpufreq/avail_gov02.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # For each available governor, can we change the cpu governor to
- # that new value? Sleep a few seconds after changing to allow system
- # to settle down.
-###
-
-for i in `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors`
-do
- echo $i > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
- if [ $? != 0 ]; then
- echo "FAIL can not write governor for $i"
- exit -1
- fi
- sleep 5
- if [ `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor` != $i ]; then
- echo "FAIL could not change governor to $i"
- exit -1
- fi
-done
-
-echo PASS
-
-
diff --git a/testcases/cpuhotplug/Makefile b/testcases/cpuhotplug/Makefile
deleted file mode 100644
index ab92602..0000000
--- a/testcases/cpuhotplug/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-testcases = cpu_hotplug_latency.sh
-
-all:
- @for t in $(testcases) ; do chmod +x $$t; done;
-
-clean:
- @for t in $(testcases) ; do chmod -x $$t; done;
- rm -rf test_load.txt
diff --git a/testcases/cpuhotplug/cpu_hotplug_latency.sh b/testcases/cpuhotplug/cpu_hotplug_latency.sh
deleted file mode 100755
index 9fb63f1..0000000
--- a/testcases/cpuhotplug/cpu_hotplug_latency.sh
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/sh
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-PWD=pwd
-
-echo 0 > /sys/kernel/debug/tracing/tracing_on
-
-echo 1 > /sys/kernel/debug/tracing/events/cpu_hotplug/enable
-
-# echo "**** TEST LOADED CPU*****"
-
-LOOP=10
-MAX_PROCESS=$LOOP
-
-while ( test $LOOP -ge 0 ); do
-
- PROCESS=$LOOP
-
- while ( test $PROCESS -lt $MAX_PROCESS ); do
- # echo "**** Start cyclictest *****"
- cyclictest -D 180 -t 10 -q > /dev/null &
- PROCESS=$(( $PROCESS + 1 ))
- done
-
- ILOOP=20
- echo 1 > /sys/kernel/debug/tracing/tracing_on
-
- while ( test $ILOOP -ge 1 ); do
-
- # echo "**** TEST " $ILOOP " *****"
- # echo ""
-
- sleep 1
-
-# echo -n "Disabling CPU1 ... "
- echo 0 > /sys/devices/system/cpu/cpu1/online
- # echo "Disable"
-
- sleep 1
-
-# echo -n "Enabling CPU1 ... "
- echo 1 > /sys/devices/system/cpu/cpu1/online
- # echo "Enable"
-
- sleep 1
-
- ILOOP=$(( $ILOOP - 1 ))
-
- done
-
- echo 0 > /sys/kernel/debug/tracing/tracing_on
-
- LIST=`ps | grep cyclictest | awk '{ print $1 }'`
-
- for I in $LIST; do
- # echo "**** Kill cyclictest *****"
- kill $I
- done
-
- LOOP=$(( $LOOP - 1 ))
-
-done
-
-cat /sys/kernel/debug/tracing/trace > $PWD/test_load.txt
-
-echo "PASS"
diff --git a/testcases/cpuidle/Makefile b/testcases/cpuidle/Makefile
deleted file mode 100644
index 64a9f79..0000000
--- a/testcases/cpuidle/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-CC=gcc
-CFLAGS=-Wall
-
-all: test_usb_cpuidle
-
-clean:
- rm -f test_usb_cpuidle test_usb_cpuidle.o
-
-
-
diff --git a/testcases/cpuidle/test_usb_cpuidle.c b/testcases/cpuidle/test_usb_cpuidle.c
deleted file mode 100644
index 9f12161..0000000
--- a/testcases/cpuidle/test_usb_cpuidle.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * PM-QA validation test suite for the power management on Linux
- *
- * Copyright (C) 2011, Linaro Limited.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contributors:
- * Torez Smith <torez.smith@linaro.org> (IBM Corporation)
- * - initial API and implementation
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <unistd.h>
-//void usleep(unsigned long usec);
-
-
-#define MAX_COUNT 1024
-int main(int argc, char *argv[])
-{
- int err = 0;
- FILE *fp = 0;
- int byteCount = 0;
- int iterCount = 0;
- char dataArray[MAX_COUNT];
-/*
- printf("\nUSB mass storage test: parameters --device_name, byte to read, times to run\n");
-*/
- if(argc!=4) {
- printf("Error: No of argumets not proper\n");
- return 0;
- }
- byteCount = atoi(argv[2]);
- iterCount = atoi(argv[3]);
-/*
- printf("Device to open=%s, bytes read =%d, iteration =%d\n",argv[1], byteCount, iterCount);
-*/
- fp = fopen(argv[1], "r");
- if(fp == NULL)
- {
- printf("Error: Invalid device name passed\n");
- return 0;
- }
-
- /*Init random generator*/
- srand((unsigned int)time(NULL));
- while(iterCount != 0) {
- /*read from the begining*/
- err = fread(dataArray,1,byteCount,fp);
- if(err < 0) {
- printf("Error: Data read failed\n");
- return 0;
- }
- fseek(fp,((iterCount%5)*100*1024), SEEK_SET);
- if(err < 0) {
- printf("Error: Data seek failed\n");
- return 0;
- }
-
- /*read from somewhere in the middle*/
- err = fread(dataArray,1,byteCount,fp);
- if(err < 0) {
- printf("Error: Data read failed\n");
- return 0;
- }
- fseek(fp, byteCount, SEEK_END);
- if(err < 0) {
- printf("Error: Data seek failed\n");
- return 0;
- }
-
- /*read from the end*/
- err = fread(dataArray,1,byteCount,fp);
- if(err < 0) {
- printf("Error: Data read failed\n");
- return 0;
- }
-
- rewind(fp);
- iterCount--;
- fclose(fp);
- /*sleep between 1ms to 50ms*/
- usleep(((rand()%50) + 1)*1000);
- fp = fopen(argv[1], "r");
- }
- fclose(fp);
- return 0;
-}
diff --git a/testcases/proof_o_concept/Makefile b/testcases/proof_o_concept/Makefile
deleted file mode 100644
index 6d54932..0000000
--- a/testcases/proof_o_concept/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-testcases = PM-list_c_states.sh PM-list_p_states.sh
-
-all:
- @for t in $(testcases) ; do chmod +x $$t; done;
-
-clean:
- @for t in $(testcases) ; do chmod -x $$t; done;
diff --git a/testcases/proof_o_concept/PM-list_c_states.sh b/testcases/proof_o_concept/PM-list_c_states.sh
deleted file mode 100755
index f274419..0000000
--- a/testcases/proof_o_concept/PM-list_c_states.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # Determine which CPUidle C States are defined on this system by
- # cycling through the sysfs files for cpuidle.
-###
-
-for state in `cat /sys/devices/system/cpu/cpu0/cpuidle/state*/name`
-do
- test_case=$test_case' '$state
-done
-
-echo $test_case
diff --git a/testcases/proof_o_concept/PM-list_p_states.sh b/testcases/proof_o_concept/PM-list_p_states.sh
deleted file mode 100755
index 8c592bf..0000000
--- a/testcases/proof_o_concept/PM-list_p_states.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-#
-# PM-QA validation test suite for the power management on Linux
-#
-# Copyright (C) 2011, Linaro Limited.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# Contributors:
-# Torez Smith <torez.smith@linaro.org> (IBM Corporation)
-# - initial API and implementation
-#
-
-###
- # Determine which CPUidle P States are defined on this system by
- # cycling through the sysfs files for cpufreq.
-###
-
-echo `cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies`
-
