| /* |
| * ppp.c - STREAMS multiplexing pseudo-device driver for PPP. |
| * |
| * Copyright (c) 1994 Paul Mackerras. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. The name(s) of the authors of this software must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. |
| * |
| * 4. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by Paul Mackerras |
| * <paulus@samba.org>". |
| * |
| * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO |
| * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY |
| * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN |
| * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING |
| * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| * $Id: ppp.c,v 1.2 2002/12/06 09:49:16 paulus Exp $ |
| */ |
| |
| /* |
| * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX. |
| */ |
| |
| #include <sys/types.h> |
| #include <sys/param.h> |
| #include <sys/stat.h> |
| #include <sys/stream.h> |
| #include <sys/stropts.h> |
| #include <sys/errno.h> |
| #ifdef __osf__ |
| #include <sys/ioctl.h> |
| #include <sys/cmn_err.h> |
| #define queclass(mp) ((mp)->b_band & QPCTL) |
| #else |
| #include <sys/ioccom.h> |
| #endif |
| #include <sys/time.h> |
| #ifdef SVR4 |
| #include <sys/cmn_err.h> |
| #include <sys/conf.h> |
| #include <sys/dlpi.h> |
| #include <sys/ddi.h> |
| #ifdef SOL2 |
| #include <sys/ksynch.h> |
| #include <sys/kstat.h> |
| #include <sys/sunddi.h> |
| #include <sys/ethernet.h> |
| #else |
| #include <sys/socket.h> |
| #include <sys/sockio.h> |
| #include <net/if.h> |
| #include <netinet/in.h> |
| #endif /* SOL2 */ |
| #else /* not SVR4 */ |
| #include <sys/user.h> |
| #endif /* SVR4 */ |
| #include <net/ppp_defs.h> |
| #include <net/pppio.h> |
| #include "ppp_mod.h" |
| |
| /* |
| * Modifications marked with #ifdef PRIOQ are for priority queueing of |
| * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>. |
| */ |
| #ifdef PRIOQ |
| #endif /* PRIOQ */ |
| |
| #include <netinet/in.h> /* leave this outside of PRIOQ for htons */ |
| |
| #ifdef __STDC__ |
| #define __P(x) x |
| #else |
| #define __P(x) () |
| #endif |
| |
| /* |
| * The IP module may use this SAP value for IP packets. |
| */ |
| #ifndef ETHERTYPE_IP |
| #define ETHERTYPE_IP 0x800 |
| #endif |
| |
| #if !defined(ETHERTYPE_IPV6) |
| #define ETHERTYPE_IPV6 0x86dd |
| #endif /* !defined(ETHERTYPE_IPV6) */ |
| |
| #if !defined(ETHERTYPE_ALLSAP) && defined(SOL2) |
| #define ETHERTYPE_ALLSAP 0 |
| #endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */ |
| |
| #if !defined(PPP_ALLSAP) && defined(SOL2) |
| #define PPP_ALLSAP PPP_ALLSTATIONS |
| #endif /* !defined(PPP_ALLSAP) && defined(SOL2) */ |
| |
| extern time_t time; |
| |
| #ifdef SOL2 |
| /* |
| * We use this reader-writer lock to ensure that the lower streams |
| * stay connected to the upper streams while the lower-side put and |
| * service procedures are running. Essentially it is an existence |
| * lock for the upper stream associated with each lower stream. |
| */ |
| krwlock_t ppp_lower_lock; |
| #define LOCK_LOWER_W rw_enter(&ppp_lower_lock, RW_WRITER) |
| #define LOCK_LOWER_R rw_enter(&ppp_lower_lock, RW_READER) |
| #define TRYLOCK_LOWER_R rw_tryenter(&ppp_lower_lock, RW_READER) |
| #define UNLOCK_LOWER rw_exit(&ppp_lower_lock) |
| |
| #define MT_ENTER(x) mutex_enter(x) |
| #define MT_EXIT(x) mutex_exit(x) |
| |
| /* |
| * Notes on multithreaded implementation for Solaris 2: |
| * |
| * We use an inner perimeter around each queue pair and an outer |
| * perimeter around the whole driver. The inner perimeter is |
| * entered exclusively for all entry points (open, close, put, |
| * service). The outer perimeter is entered exclusively for open |
| * and close and shared for put and service. This is all done for |
| * us by the streams framework. |
| * |
| * I used to think that the perimeters were entered for the lower |
| * streams' put and service routines as well as for the upper streams'. |
| * Because of problems experienced by people, and after reading the |
| * documentation more closely, I now don't think that is true. So we |
| * now use ppp_lower_lock to give us an existence guarantee on the |
| * upper stream controlling each lower stream. |
| * |
| * Shared entry to the outer perimeter protects the existence of all |
| * the upper streams and their upperstr_t structures, and guarantees |
| * that the following fields of any upperstr_t won't change: |
| * nextmn, next, nextppa. It guarantees that the lowerq field of an |
| * upperstr_t won't go from non-zero to zero, that the global `ppas' |
| * won't change and that the no lower stream will get unlinked. |
| * |
| * Shared (reader) access to ppa_lower_lock guarantees that no lower |
| * stream will be unlinked and that the lowerq field of all upperstr_t |
| * structures won't change. |
| */ |
| |
| #else /* SOL2 */ |
| #define LOCK_LOWER_W 0 |
| #define LOCK_LOWER_R 0 |
| #define TRYLOCK_LOWER_R 1 |
| #define UNLOCK_LOWER 0 |
| #define MT_ENTER(x) 0 |
| #define MT_EXIT(x) 0 |
| |
| #endif /* SOL2 */ |
| |
| /* |
| * Private information; one per upper stream. |
| */ |
| typedef struct upperstr { |
| minor_t mn; /* minor device number */ |
| struct upperstr *nextmn; /* next minor device */ |
| queue_t *q; /* read q associated with this upper stream */ |
| int flags; /* flag bits, see below */ |
| int state; /* current DLPI state */ |
| int sap; /* service access point */ |
| int req_sap; /* which SAP the DLPI client requested */ |
| struct upperstr *ppa; /* control stream for our ppa */ |
| struct upperstr *next; /* next stream for this ppa */ |
| uint ioc_id; /* last ioctl ID for this stream */ |
| enum NPmode npmode; /* what to do with packets on this SAP */ |
| unsigned char rblocked; /* flow control has blocked upper read strm */ |
| /* N.B. rblocked is only changed by control stream's put/srv procs */ |
| /* |
| * There is exactly one control stream for each PPA. |
| * The following fields are only used for control streams. |
| */ |
| int ppa_id; |
| queue_t *lowerq; /* write queue attached below this PPA */ |
| struct upperstr *nextppa; /* next control stream */ |
| int mru; |
| int mtu; |
| struct pppstat stats; /* statistics */ |
| time_t last_sent; /* time last NP packet sent */ |
| time_t last_recv; /* time last NP packet rcvd */ |
| #ifdef SOL2 |
| kmutex_t stats_lock; /* lock for stats updates */ |
| kstat_t *kstats; /* stats for netstat */ |
| #endif /* SOL2 */ |
| #ifdef LACHTCP |
| int ifflags; |
| char ifname[IFNAMSIZ]; |
| struct ifstats ifstats; |
| #endif /* LACHTCP */ |
| } upperstr_t; |
| |
| /* Values for flags */ |
| #define US_PRIV 1 /* stream was opened by superuser */ |
| #define US_CONTROL 2 /* stream is a control stream */ |
| #define US_BLOCKED 4 /* flow ctrl has blocked lower write stream */ |
| #define US_LASTMOD 8 /* no PPP modules below us */ |
| #define US_DBGLOG 0x10 /* log various occurrences */ |
| #define US_RBLOCKED 0x20 /* flow ctrl has blocked upper read stream */ |
| |
| #if defined(SOL2) |
| #if DL_CURRENT_VERSION >= 2 |
| #define US_PROMISC 0x40 /* stream is promiscuous */ |
| #endif /* DL_CURRENT_VERSION >= 2 */ |
| #define US_RAWDATA 0x80 /* raw M_DATA, no DLPI header */ |
| #endif /* defined(SOL2) */ |
| |
| #ifdef PRIOQ |
| static u_char max_band=0; |
| static u_char def_band=0; |
| |
| #define IPPORT_DEFAULT 65535 |
| |
| /* |
| * Port priority table |
| * Highest priority ports are listed first, lowest are listed last. |
| * ICMP & packets using unlisted ports will be treated as "default". |
| * If IPPORT_DEFAULT is not listed here, "default" packets will be |
| * assigned lowest priority. |
| * Each line should be terminated with "0". |
| * Line containing only "0" marks the end of the list. |
| */ |
| |
| static u_short prioq_table[]= { |
| 113, 53, 0, |
| 22, 23, 513, 517, 518, 0, |
| 514, 21, 79, 111, 0, |
| 25, 109, 110, 0, |
| IPPORT_DEFAULT, 0, |
| 20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */ |
| 0 }; |
| |
| #endif /* PRIOQ */ |
| |
| |
| static upperstr_t *minor_devs = NULL; |
| static upperstr_t *ppas = NULL; |
| |
| #ifdef SVR4 |
| static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *)); |
| static int pppclose __P((queue_t *, int, cred_t *)); |
| #else |
| static int pppopen __P((queue_t *, int, int, int)); |
| static int pppclose __P((queue_t *, int)); |
| #endif /* SVR4 */ |
| static int pppurput __P((queue_t *, mblk_t *)); |
| static int pppuwput __P((queue_t *, mblk_t *)); |
| static int pppursrv __P((queue_t *)); |
| static int pppuwsrv __P((queue_t *)); |
| static int ppplrput __P((queue_t *, mblk_t *)); |
| static int ppplwput __P((queue_t *, mblk_t *)); |
| static int ppplrsrv __P((queue_t *)); |
| static int ppplwsrv __P((queue_t *)); |
| #ifndef NO_DLPI |
| static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *)); |
| static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int)); |
| static void dlpi_ok __P((queue_t *, int)); |
| #endif |
| static int send_data __P((mblk_t *, upperstr_t *)); |
| static void new_ppa __P((queue_t *, mblk_t *)); |
| static void attach_ppa __P((queue_t *, mblk_t *)); |
| static void detach_ppa __P((queue_t *, mblk_t *)); |
| static void detach_lower __P((queue_t *, mblk_t *)); |
| static void debug_dump __P((queue_t *, mblk_t *)); |
| static upperstr_t *find_dest __P((upperstr_t *, int)); |
| #if defined(SOL2) |
| static upperstr_t *find_promisc __P((upperstr_t *, int)); |
| static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int)); |
| static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int)); |
| static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int)); |
| #endif /* defined(SOL2) */ |
| static int putctl2 __P((queue_t *, int, int, int)); |
| static int putctl4 __P((queue_t *, int, int, int)); |
| static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound)); |
| #ifdef FILTER_PACKETS |
| static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound)); |
| #endif /* FILTER_PACKETS */ |
| |
| #define PPP_ID 0xb1a6 |
| static struct module_info ppp_info = { |
| #ifdef PRIOQ |
| PPP_ID, "ppp", 0, 512, 512, 384 |
| #else |
| PPP_ID, "ppp", 0, 512, 512, 128 |
| #endif /* PRIOQ */ |
| }; |
| |
| static struct qinit pppurint = { |
| pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL |
| }; |
| |
| static struct qinit pppuwint = { |
| pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL |
| }; |
| |
| static struct qinit ppplrint = { |
| ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL |
| }; |
| |
| static struct qinit ppplwint = { |
| ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL |
| }; |
| |
| #ifdef LACHTCP |
| extern struct ifstats *ifstats; |
| int pppdevflag = 0; |
| #endif |
| |
| struct streamtab pppinfo = { |
| &pppurint, &pppuwint, |
| &ppplrint, &ppplwint |
| }; |
| |
| int ppp_count; |
| |
| /* |
| * How we maintain statistics. |
| */ |
| #ifdef SOL2 |
| #define INCR_IPACKETS(ppa) \ |
| if (ppa->kstats != 0) { \ |
| KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++; \ |
| } |
| #define INCR_IERRORS(ppa) \ |
| if (ppa->kstats != 0) { \ |
| KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++; \ |
| } |
| #define INCR_OPACKETS(ppa) \ |
| if (ppa->kstats != 0) { \ |
| KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++; \ |
| } |
| #define INCR_OERRORS(ppa) \ |
| if (ppa->kstats != 0) { \ |
| KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++; \ |
| } |
| #endif |
| |
| #ifdef LACHTCP |
| #define INCR_IPACKETS(ppa) ppa->ifstats.ifs_ipackets++; |
| #define INCR_IERRORS(ppa) ppa->ifstats.ifs_ierrors++; |
| #define INCR_OPACKETS(ppa) ppa->ifstats.ifs_opackets++; |
| #define INCR_OERRORS(ppa) ppa->ifstats.ifs_oerrors++; |
| #endif |
| |
| /* |
| * STREAMS driver entry points. |
| */ |
| static int |
| #ifdef SVR4 |
| pppopen(q, devp, oflag, sflag, credp) |
| queue_t *q; |
| dev_t *devp; |
| int oflag, sflag; |
| cred_t *credp; |
| #else |
| pppopen(q, dev, oflag, sflag) |
| queue_t *q; |
| int dev; /* really dev_t */ |
| int oflag, sflag; |
| #endif |
| { |
| upperstr_t *up; |
| upperstr_t **prevp; |
| minor_t mn; |
| #ifdef PRIOQ |
| u_short *ptr; |
| u_char new_band; |
| #endif /* PRIOQ */ |
| |
| if (q->q_ptr) |
| DRV_OPEN_OK(dev); /* device is already open */ |
| |
| #ifdef PRIOQ |
| /* Calculate max_bband & def_band from definitions in prioq.h |
| This colud be done at some more approtiate time (less often) |
| but this way it works well so I'll just leave it here */ |
| |
| max_band = 1; |
| def_band = 0; |
| ptr = prioq_table; |
| while (*ptr) { |
| new_band = 1; |
| while (*ptr) |
| if (*ptr++ == IPPORT_DEFAULT) { |
| new_band = 0; |
| def_band = max_band; |
| } |
| max_band += new_band; |
| ptr++; |
| } |
| if (def_band) |
| def_band = max_band - def_band; |
| --max_band; |
| #endif /* PRIOQ */ |
| |
| if (sflag == CLONEOPEN) { |
| mn = 0; |
| for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) { |
| if (up->mn != mn) |
| break; |
| ++mn; |
| } |
| } else { |
| #ifdef SVR4 |
| mn = getminor(*devp); |
| #else |
| mn = minor(dev); |
| #endif |
| for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) { |
| if (up->mn >= mn) |
| break; |
| } |
| if (up->mn == mn) { |
| /* this can't happen */ |
| q->q_ptr = WR(q)->q_ptr = (caddr_t) up; |
| DRV_OPEN_OK(dev); |
| } |
| } |
| |
| /* |
| * Construct a new minor node. |
| */ |
| up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t)); |
| bzero((caddr_t) up, sizeof(upperstr_t)); |
| if (up == 0) { |
| DPRINT("pppopen: out of kernel memory\n"); |
| OPEN_ERROR(ENXIO); |
| } |
| up->nextmn = *prevp; |
| *prevp = up; |
| up->mn = mn; |
| #ifdef SVR4 |
| *devp = makedevice(getmajor(*devp), mn); |
| #endif |
| up->q = q; |
| if (NOTSUSER() == 0) |
| up->flags |= US_PRIV; |
| #ifndef NO_DLPI |
| up->state = DL_UNATTACHED; |
| #endif |
| #ifdef LACHTCP |
| up->ifflags = IFF_UP | IFF_POINTOPOINT; |
| #endif |
| up->sap = -1; |
| up->last_sent = up->last_recv = time; |
| up->npmode = NPMODE_DROP; |
| q->q_ptr = (caddr_t) up; |
| WR(q)->q_ptr = (caddr_t) up; |
| noenable(WR(q)); |
| #ifdef SOL2 |
| mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL); |
| #endif |
| ++ppp_count; |
| |
| qprocson(q); |
| DRV_OPEN_OK(makedev(major(dev), mn)); |
| } |
| |
| static int |
| #ifdef SVR4 |
| pppclose(q, flag, credp) |
| queue_t *q; |
| int flag; |
| cred_t *credp; |
| #else |
| pppclose(q, flag) |
| queue_t *q; |
| int flag; |
| #endif |
| { |
| upperstr_t *up, **upp; |
| upperstr_t *as, *asnext; |
| upperstr_t **prevp; |
| |
| qprocsoff(q); |
| |
| up = (upperstr_t *) q->q_ptr; |
| if (up == 0) { |
| DPRINT("pppclose: q_ptr = 0\n"); |
| return 0; |
| } |
| if (up->flags & US_DBGLOG) |
| DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags); |
| if (up->flags & US_CONTROL) { |
| #ifdef LACHTCP |
| struct ifstats *ifp, *pifp; |
| #endif |
| if (up->lowerq != 0) { |
| /* Gack! the lower stream should have be unlinked earlier! */ |
| DPRINT1("ppp%d: lower stream still connected on close?\n", |
| up->mn); |
| LOCK_LOWER_W; |
| up->lowerq->q_ptr = 0; |
| RD(up->lowerq)->q_ptr = 0; |
| up->lowerq = 0; |
| UNLOCK_LOWER; |
| } |
| |
| /* |
| * This stream represents a PPA: |
| * For all streams attached to the PPA, clear their |
| * references to this PPA. |
| * Then remove this PPA from the list of PPAs. |
| */ |
| for (as = up->next; as != 0; as = asnext) { |
| asnext = as->next; |
| as->next = 0; |
| as->ppa = 0; |
| if (as->flags & US_BLOCKED) { |
| as->flags &= ~US_BLOCKED; |
| flushq(WR(as->q), FLUSHDATA); |
| } |
| } |
| for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa) |
| if (*upp == up) { |
| *upp = up->nextppa; |
| break; |
| } |
| #ifdef LACHTCP |
| /* Remove the statistics from the active list. */ |
| for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) { |
| if (ifp == &up->ifstats) { |
| if (pifp) |
| pifp->ifs_next = ifp->ifs_next; |
| else |
| ifstats = ifp->ifs_next; |
| break; |
| } |
| pifp = ifp; |
| } |
| #endif |
| } else { |
| /* |
| * If this stream is attached to a PPA, |
| * remove it from the PPA's list. |
| */ |
| if ((as = up->ppa) != 0) { |
| for (; as->next != 0; as = as->next) |
| if (as->next == up) { |
| as->next = up->next; |
| break; |
| } |
| } |
| } |
| |
| #ifdef SOL2 |
| if (up->kstats) |
| kstat_delete(up->kstats); |
| mutex_destroy(&up->stats_lock); |
| #endif |
| |
| q->q_ptr = NULL; |
| WR(q)->q_ptr = NULL; |
| |
| for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) { |
| if (*prevp == up) { |
| *prevp = up->nextmn; |
| break; |
| } |
| } |
| FREE(up, sizeof(upperstr_t)); |
| --ppp_count; |
| |
| return 0; |
| } |
| |
| /* |
| * A message from on high. We do one of three things: |
| * - qreply() |
| * - put the message on the lower write stream |
| * - queue it for our service routine |
| */ |
| static int |
| pppuwput(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us, *ppa, *nps; |
| struct iocblk *iop; |
| struct linkblk *lb; |
| #ifdef LACHTCP |
| struct ifreq *ifr; |
| int i; |
| #endif |
| queue_t *lq; |
| int error, n, sap; |
| mblk_t *mq; |
| struct ppp_idle *pip; |
| #ifdef PRIOQ |
| queue_t *tlq; |
| #endif /* PRIOQ */ |
| #ifdef NO_DLPI |
| upperstr_t *os; |
| #endif |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("pppuwput: q_ptr = 0!\n"); |
| return 0; |
| } |
| if (mp == 0) { |
| DPRINT1("pppuwput/%d: mp = 0!\n", us->mn); |
| return 0; |
| } |
| if (mp->b_datap == 0) { |
| DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn); |
| return 0; |
| } |
| switch (mp->b_datap->db_type) { |
| #ifndef NO_DLPI |
| case M_PCPROTO: |
| case M_PROTO: |
| dlpi_request(q, mp, us); |
| break; |
| #endif /* NO_DLPI */ |
| |
| case M_DATA: |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n", |
| us->mn, msgdsize(mp), us->flags); |
| if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN |
| #ifndef NO_DLPI |
| || (us->flags & US_CONTROL) == 0 |
| #endif /* NO_DLPI */ |
| ) { |
| DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp)); |
| freemsg(mp); |
| break; |
| } |
| #ifdef NO_DLPI |
| if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1)) |
| break; |
| #endif |
| if (!send_data(mp, us)) |
| putq(q, mp); |
| break; |
| |
| case M_IOCTL: |
| iop = (struct iocblk *) mp->b_rptr; |
| error = EINVAL; |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: ioctl %x count=%d\n", |
| us->mn, iop->ioc_cmd, iop->ioc_count); |
| switch (iop->ioc_cmd) { |
| #if defined(SOL2) |
| case DLIOCRAW: /* raw M_DATA mode */ |
| us->flags |= US_RAWDATA; |
| error = 0; |
| break; |
| #endif /* defined(SOL2) */ |
| case I_LINK: |
| if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn); |
| break; |
| } |
| lb = (struct linkblk *) mp->b_cont->b_rptr; |
| lq = lb->l_qbot; |
| if (lq == 0) { |
| DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn); |
| break; |
| } |
| LOCK_LOWER_W; |
| us->lowerq = lq; |
| lq->q_ptr = (caddr_t) q; |
| RD(lq)->q_ptr = (caddr_t) us->q; |
| UNLOCK_LOWER; |
| iop->ioc_count = 0; |
| error = 0; |
| us->flags &= ~US_LASTMOD; |
| /* Unblock upper streams which now feed this lower stream. */ |
| qenable(q); |
| /* Send useful information down to the modules which |
| are now linked below us. */ |
| putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id); |
| putctl4(lq, M_CTL, PPPCTL_MRU, us->mru); |
| putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu); |
| #ifdef PRIOQ |
| /* Lower tty driver's queue hiwat/lowat from default 4096/128 |
| to 256/128 since we don't want queueing of data on |
| output to physical device */ |
| |
| freezestr(lq); |
| for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next) |
| ; |
| strqset(tlq, QHIWAT, 0, 256); |
| strqset(tlq, QLOWAT, 0, 128); |
| unfreezestr(lq); |
| #endif /* PRIOQ */ |
| break; |
| |
| case I_UNLINK: |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn); |
| break; |
| } |
| lb = (struct linkblk *) mp->b_cont->b_rptr; |
| #if DEBUG |
| if (us->lowerq != lb->l_qbot) { |
| DPRINT2("ppp unlink: lowerq=%x qbot=%x\n", |
| us->lowerq, lb->l_qbot); |
| break; |
| } |
| #endif |
| iop->ioc_count = 0; |
| qwriter(q, mp, detach_lower, PERIM_OUTER); |
| error = -1; |
| break; |
| |
| case PPPIO_NEWPPA: |
| if (us->flags & US_CONTROL) |
| break; |
| if ((us->flags & US_PRIV) == 0) { |
| error = EPERM; |
| break; |
| } |
| /* Arrange to return an int */ |
| if ((mq = mp->b_cont) == 0 |
| || mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) { |
| mq = allocb(sizeof(int), BPRI_HI); |
| if (mq == 0) { |
| error = ENOSR; |
| break; |
| } |
| if (mp->b_cont != 0) |
| freemsg(mp->b_cont); |
| mp->b_cont = mq; |
| mq->b_cont = 0; |
| } |
| iop->ioc_count = sizeof(int); |
| mq->b_wptr = mq->b_rptr + sizeof(int); |
| qwriter(q, mp, new_ppa, PERIM_OUTER); |
| error = -1; |
| break; |
| |
| case PPPIO_ATTACH: |
| /* like dlpi_attach, for programs which can't write to |
| the stream (like pppstats) */ |
| if (iop->ioc_count != sizeof(int) || us->ppa != 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn); |
| break; |
| } |
| n = *(int *)mp->b_cont->b_rptr; |
| for (ppa = ppas; ppa != 0; ppa = ppa->nextppa) |
| if (ppa->ppa_id == n) |
| break; |
| if (ppa == 0) |
| break; |
| us->ppa = ppa; |
| iop->ioc_count = 0; |
| qwriter(q, mp, attach_ppa, PERIM_OUTER); |
| error = -1; |
| break; |
| |
| #ifdef NO_DLPI |
| case PPPIO_BIND: |
| /* Attach to a given SAP. */ |
| if (iop->ioc_count != sizeof(int) || us->ppa == 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn); |
| break; |
| } |
| n = *(int *)mp->b_cont->b_rptr; |
| /* n must be a valid PPP network protocol number. */ |
| if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1) |
| break; |
| /* check that no other stream is bound to this sap already. */ |
| for (os = us->ppa; os != 0; os = os->next) |
| if (os->sap == n) |
| break; |
| if (os != 0) |
| break; |
| us->sap = n; |
| iop->ioc_count = 0; |
| error = 0; |
| break; |
| #endif /* NO_DLPI */ |
| |
| case PPPIO_MRU: |
| if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn); |
| break; |
| } |
| n = *(int *)mp->b_cont->b_rptr; |
| if (n <= 0 || n > PPP_MAXMRU) |
| break; |
| if (n < PPP_MRU) |
| n = PPP_MRU; |
| us->mru = n; |
| if (us->lowerq) |
| putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n); |
| error = 0; |
| iop->ioc_count = 0; |
| break; |
| |
| case PPPIO_MTU: |
| if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn); |
| break; |
| } |
| n = *(int *)mp->b_cont->b_rptr; |
| if (n <= 0 || n > PPP_MAXMTU) |
| break; |
| us->mtu = n; |
| #ifdef LACHTCP |
| /* The MTU reported in netstat, not used as IP max packet size! */ |
| us->ifstats.ifs_mtu = n; |
| #endif |
| if (us->lowerq) |
| putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n); |
| error = 0; |
| iop->ioc_count = 0; |
| break; |
| |
| case PPPIO_LASTMOD: |
| us->flags |= US_LASTMOD; |
| error = 0; |
| break; |
| |
| case PPPIO_DEBUG: |
| if (iop->ioc_count != sizeof(int)) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn); |
| break; |
| } |
| n = *(int *)mp->b_cont->b_rptr; |
| if (n == PPPDBG_DUMP + PPPDBG_DRIVER) { |
| qwriter(q, NULL, debug_dump, PERIM_OUTER); |
| iop->ioc_count = 0; |
| error = -1; |
| } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) { |
| DPRINT1("ppp/%d: debug log enabled\n", us->mn); |
| us->flags |= US_DBGLOG; |
| iop->ioc_count = 0; |
| error = 0; |
| } else { |
| if (us->ppa == 0 || us->ppa->lowerq == 0) |
| break; |
| putnext(us->ppa->lowerq, mp); |
| error = -1; |
| } |
| break; |
| |
| case PPPIO_NPMODE: |
| if (iop->ioc_count != 2 * sizeof(int)) |
| break; |
| if ((us->flags & US_CONTROL) == 0) |
| break; |
| if (mp->b_cont == 0) { |
| DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn); |
| break; |
| } |
| sap = ((int *)mp->b_cont->b_rptr)[0]; |
| for (nps = us->next; nps != 0; nps = nps->next) { |
| if (us->flags & US_DBGLOG) |
| DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap); |
| if (nps->sap == sap) |
| break; |
| } |
| if (nps == 0) { |
| if (us->flags & US_DBGLOG) |
| DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap); |
| break; |
| } |
| /* XXX possibly should use qwriter here */ |
| nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1]; |
| if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0) |
| qenable(WR(nps->q)); |
| iop->ioc_count = 0; |
| error = 0; |
| break; |
| |
| case PPPIO_GIDLE: |
| if ((ppa = us->ppa) == 0) |
| break; |
| mq = allocb(sizeof(struct ppp_idle), BPRI_HI); |
| if (mq == 0) { |
| error = ENOSR; |
| break; |
| } |
| if (mp->b_cont != 0) |
| freemsg(mp->b_cont); |
| mp->b_cont = mq; |
| mq->b_cont = 0; |
| pip = (struct ppp_idle *) mq->b_wptr; |
| pip->xmit_idle = time - ppa->last_sent; |
| pip->recv_idle = time - ppa->last_recv; |
| mq->b_wptr += sizeof(struct ppp_idle); |
| iop->ioc_count = sizeof(struct ppp_idle); |
| error = 0; |
| break; |
| |
| #ifdef LACHTCP |
| case SIOCSIFNAME: |
| /* Sent from IP down to us. Attach the ifstats structure. */ |
| if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0) |
| break; |
| ifr = (struct ifreq *)mp->b_cont->b_rptr; |
| /* Find the unit number in the interface name. */ |
| for (i = 0; i < IFNAMSIZ; i++) { |
| if (ifr->ifr_name[i] == 0 || |
| (ifr->ifr_name[i] >= '0' && |
| ifr->ifr_name[i] <= '9')) |
| break; |
| else |
| us->ifname[i] = ifr->ifr_name[i]; |
| } |
| us->ifname[i] = 0; |
| |
| /* Convert the unit number to binary. */ |
| for (n = 0; i < IFNAMSIZ; i++) { |
| if (ifr->ifr_name[i] == 0) { |
| break; |
| } |
| else { |
| n = n * 10 + ifr->ifr_name[i] - '0'; |
| } |
| } |
| |
| /* Verify the ppa. */ |
| if (us->ppa->ppa_id != n) |
| break; |
| ppa = us->ppa; |
| |
| /* Set up the netstat block. */ |
| strncpy (ppa->ifname, us->ifname, IFNAMSIZ); |
| |
| ppa->ifstats.ifs_name = ppa->ifname; |
| ppa->ifstats.ifs_unit = n; |
| ppa->ifstats.ifs_active = us->state != DL_UNBOUND; |
| ppa->ifstats.ifs_mtu = ppa->mtu; |
| |
| /* Link in statistics used by netstat. */ |
| ppa->ifstats.ifs_next = ifstats; |
| ifstats = &ppa->ifstats; |
| |
| iop->ioc_count = 0; |
| error = 0; |
| break; |
| |
| case SIOCGIFFLAGS: |
| if (!(us->flags & US_CONTROL)) { |
| if (us->ppa) |
| us = us->ppa; |
| else |
| break; |
| } |
| ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags; |
| error = 0; |
| break; |
| |
| case SIOCSIFFLAGS: |
| if (!(us->flags & US_CONTROL)) { |
| if (us->ppa) |
| us = us->ppa; |
| else |
| break; |
| } |
| us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags; |
| error = 0; |
| break; |
| |
| case SIOCSIFADDR: |
| if (!(us->flags & US_CONTROL)) { |
| if (us->ppa) |
| us = us->ppa; |
| else |
| break; |
| } |
| us->ifflags |= IFF_RUNNING; |
| ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING; |
| error = 0; |
| break; |
| |
| case SIOCSIFMTU: |
| /* |
| * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather |
| * they take the MTU from the DL_INFO_ACK we sent in response |
| * to their DL_INFO_REQ. Fortunately, they will update the |
| * MTU if we send an unsolicited DL_INFO_ACK up. |
| */ |
| if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0) |
| break; /* should do bufcall */ |
| ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ; |
| mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t); |
| dlpi_request(q, mq, us); |
| error = 0; |
| break; |
| |
| case SIOCGIFNETMASK: |
| case SIOCSIFNETMASK: |
| case SIOCGIFADDR: |
| case SIOCGIFDSTADDR: |
| case SIOCSIFDSTADDR: |
| case SIOCGIFMETRIC: |
| error = 0; |
| break; |
| #endif /* LACHTCP */ |
| |
| default: |
| if (us->ppa == 0 || us->ppa->lowerq == 0) |
| break; |
| us->ioc_id = iop->ioc_id; |
| error = -1; |
| switch (iop->ioc_cmd) { |
| case PPPIO_GETSTAT: |
| case PPPIO_GETCSTAT: |
| if (us->flags & US_LASTMOD) { |
| error = EINVAL; |
| break; |
| } |
| putnext(us->ppa->lowerq, mp); |
| break; |
| default: |
| if (us->flags & US_PRIV) |
| putnext(us->ppa->lowerq, mp); |
| else { |
| DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd); |
| error = EPERM; |
| } |
| break; |
| } |
| break; |
| } |
| |
| if (error > 0) { |
| iop->ioc_error = error; |
| mp->b_datap->db_type = M_IOCNAK; |
| qreply(q, mp); |
| } else if (error == 0) { |
| mp->b_datap->db_type = M_IOCACK; |
| qreply(q, mp); |
| } |
| break; |
| |
| case M_FLUSH: |
| if (us->flags & US_DBGLOG) |
| DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr); |
| if (*mp->b_rptr & FLUSHW) |
| flushq(q, FLUSHDATA); |
| if (*mp->b_rptr & FLUSHR) { |
| *mp->b_rptr &= ~FLUSHW; |
| qreply(q, mp); |
| } else |
| freemsg(mp); |
| break; |
| |
| default: |
| freemsg(mp); |
| break; |
| } |
| return 0; |
| } |
| |
| #ifndef NO_DLPI |
| static void |
| dlpi_request(q, mp, us) |
| queue_t *q; |
| mblk_t *mp; |
| upperstr_t *us; |
| { |
| union DL_primitives *d = (union DL_primitives *) mp->b_rptr; |
| int size = mp->b_wptr - mp->b_rptr; |
| mblk_t *reply, *np; |
| upperstr_t *ppa, *os; |
| int sap, len; |
| dl_info_ack_t *info; |
| dl_bind_ack_t *ackp; |
| #if DL_CURRENT_VERSION >= 2 |
| dl_phys_addr_ack_t *paddrack; |
| static struct ether_addr eaddr = {0}; |
| #endif |
| |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn, |
| d->dl_primitive, size); |
| switch (d->dl_primitive) { |
| case DL_INFO_REQ: |
| if (size < sizeof(dl_info_req_t)) |
| goto badprim; |
| if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0) |
| break; /* should do bufcall */ |
| reply->b_datap->db_type = M_PCPROTO; |
| info = (dl_info_ack_t *) reply->b_wptr; |
| reply->b_wptr += sizeof(dl_info_ack_t); |
| bzero((caddr_t) info, sizeof(dl_info_ack_t)); |
| info->dl_primitive = DL_INFO_ACK; |
| info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU; |
| info->dl_min_sdu = 1; |
| info->dl_addr_length = sizeof(uint); |
| info->dl_mac_type = DL_ETHER; /* a bigger lie */ |
| info->dl_current_state = us->state; |
| info->dl_service_mode = DL_CLDLS; |
| info->dl_provider_style = DL_STYLE2; |
| #if DL_CURRENT_VERSION >= 2 |
| info->dl_sap_length = sizeof(uint); |
| info->dl_version = DL_CURRENT_VERSION; |
| #endif |
| qreply(q, reply); |
| break; |
| |
| case DL_ATTACH_REQ: |
| if (size < sizeof(dl_attach_req_t)) |
| goto badprim; |
| if (us->state != DL_UNATTACHED || us->ppa != 0) { |
| dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0); |
| break; |
| } |
| for (ppa = ppas; ppa != 0; ppa = ppa->nextppa) |
| if (ppa->ppa_id == d->attach_req.dl_ppa) |
| break; |
| if (ppa == 0) { |
| dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0); |
| break; |
| } |
| us->ppa = ppa; |
| qwriter(q, mp, attach_ppa, PERIM_OUTER); |
| return; |
| |
| case DL_DETACH_REQ: |
| if (size < sizeof(dl_detach_req_t)) |
| goto badprim; |
| if (us->state != DL_UNBOUND || us->ppa == 0) { |
| dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0); |
| break; |
| } |
| qwriter(q, mp, detach_ppa, PERIM_OUTER); |
| return; |
| |
| case DL_BIND_REQ: |
| if (size < sizeof(dl_bind_req_t)) |
| goto badprim; |
| if (us->state != DL_UNBOUND || us->ppa == 0) { |
| dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0); |
| break; |
| } |
| #if 0 |
| /* apparently this test fails (unnecessarily?) on some systems */ |
| if (d->bind_req.dl_service_mode != DL_CLDLS) { |
| dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0); |
| break; |
| } |
| #endif |
| |
| /* saps must be valid PPP network protocol numbers, |
| except that we accept ETHERTYPE_IP in place of PPP_IP. */ |
| sap = d->bind_req.dl_sap; |
| us->req_sap = sap; |
| |
| #if defined(SOL2) |
| if (us->flags & US_DBGLOG) |
| DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us); |
| |
| if (sap == ETHERTYPE_IP) /* normal IFF_IPV4 */ |
| sap = PPP_IP; |
| else if (sap == ETHERTYPE_IPV6) /* when IFF_IPV6 is set */ |
| sap = PPP_IPV6; |
| else if (sap == ETHERTYPE_ALLSAP) /* snoop gives sap of 0 */ |
| sap = PPP_ALLSAP; |
| else { |
| DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us); |
| dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0); |
| break; |
| } |
| #else |
| if (sap == ETHERTYPE_IP) |
| sap = PPP_IP; |
| if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) { |
| dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0); |
| break; |
| } |
| #endif /* defined(SOL2) */ |
| |
| /* check that no other stream is bound to this sap already. */ |
| for (os = us->ppa; os != 0; os = os->next) |
| if (os->sap == sap) |
| break; |
| if (os != 0) { |
| dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0); |
| break; |
| } |
| |
| us->sap = sap; |
| us->state = DL_IDLE; |
| |
| if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint), |
| BPRI_HI)) == 0) |
| break; /* should do bufcall */ |
| ackp = (dl_bind_ack_t *) reply->b_wptr; |
| reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint); |
| reply->b_datap->db_type = M_PCPROTO; |
| bzero((caddr_t) ackp, sizeof(dl_bind_ack_t)); |
| ackp->dl_primitive = DL_BIND_ACK; |
| ackp->dl_sap = sap; |
| ackp->dl_addr_length = sizeof(uint); |
| ackp->dl_addr_offset = sizeof(dl_bind_ack_t); |
| *(uint *)(ackp+1) = sap; |
| qreply(q, reply); |
| break; |
| |
| case DL_UNBIND_REQ: |
| if (size < sizeof(dl_unbind_req_t)) |
| goto badprim; |
| if (us->state != DL_IDLE) { |
| dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0); |
| break; |
| } |
| us->sap = -1; |
| us->state = DL_UNBOUND; |
| #ifdef LACHTCP |
| us->ppa->ifstats.ifs_active = 0; |
| #endif |
| dlpi_ok(q, DL_UNBIND_REQ); |
| break; |
| |
| case DL_UNITDATA_REQ: |
| if (size < sizeof(dl_unitdata_req_t)) |
| goto badprim; |
| if (us->state != DL_IDLE) { |
| dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0); |
| break; |
| } |
| if ((ppa = us->ppa) == 0) { |
| cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n"); |
| break; |
| } |
| len = mp->b_cont == 0? 0: msgdsize(mp->b_cont); |
| if (len > ppa->mtu) { |
| DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu); |
| break; |
| } |
| |
| #if defined(SOL2) |
| /* |
| * Should there be any promiscuous stream(s), send the data |
| * up for each promiscuous stream that we recognize. |
| */ |
| if (mp->b_cont) |
| promisc_sendup(ppa, mp->b_cont, us->sap, 0); |
| #endif /* defined(SOL2) */ |
| |
| mp->b_band = 0; |
| #ifdef PRIOQ |
| /* Extract s_port & d_port from IP-packet, the code is a bit |
| dirty here, but so am I, too... */ |
| if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP |
| && mp->b_cont != 0) { |
| u_char *bb, *tlh; |
| int iphlen, len; |
| u_short *ptr; |
| u_char band_unset, cur_band, syn; |
| u_short s_port, d_port; |
| |
| bb = mp->b_cont->b_rptr; /* bb points to IP-header*/ |
| len = mp->b_cont->b_wptr - mp->b_cont->b_rptr; |
| syn = 0; |
| s_port = IPPORT_DEFAULT; |
| d_port = IPPORT_DEFAULT; |
| if (len >= 20) { /* 20 = minimum length of IP header */ |
| iphlen = (bb[0] & 0x0f) * 4; |
| tlh = bb + iphlen; |
| len -= iphlen; |
| switch (bb[9]) { |
| case IPPROTO_TCP: |
| if (len >= 20) { /* min length of TCP header */ |
| s_port = (tlh[0] << 8) + tlh[1]; |
| d_port = (tlh[2] << 8) + tlh[3]; |
| syn = tlh[13] & 0x02; |
| } |
| break; |
| case IPPROTO_UDP: |
| if (len >= 8) { /* min length of UDP header */ |
| s_port = (tlh[0] << 8) + tlh[1]; |
| d_port = (tlh[2] << 8) + tlh[3]; |
| } |
| break; |
| } |
| } |
| |
| /* |
| * Now calculate b_band for this packet from the |
| * port-priority table. |
| */ |
| ptr = prioq_table; |
| cur_band = max_band; |
| band_unset = 1; |
| while (*ptr) { |
| while (*ptr && band_unset) |
| if (s_port == *ptr || d_port == *ptr++) { |
| mp->b_band = cur_band; |
| band_unset = 0; |
| break; |
| } |
| ptr++; |
| cur_band--; |
| } |
| if (band_unset) |
| mp->b_band = def_band; |
| /* It may be usable to urge SYN packets a bit */ |
| if (syn) |
| mp->b_band++; |
| } |
| #endif /* PRIOQ */ |
| /* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */ |
| if (mp->b_datap->db_ref > 1) { |
| np = allocb(PPP_HDRLEN, BPRI_HI); |
| if (np == 0) |
| break; /* gak! */ |
| np->b_cont = mp->b_cont; |
| mp->b_cont = 0; |
| freeb(mp); |
| mp = np; |
| } else |
| mp->b_datap->db_type = M_DATA; |
| /* XXX should use dl_dest_addr_offset/length here, |
| but we would have to translate ETHERTYPE_IP -> PPP_IP */ |
| mp->b_wptr = mp->b_rptr + PPP_HDRLEN; |
| mp->b_rptr[0] = PPP_ALLSTATIONS; |
| mp->b_rptr[1] = PPP_UI; |
| mp->b_rptr[2] = us->sap >> 8; |
| mp->b_rptr[3] = us->sap; |
| if (pass_packet(us, mp, 1)) { |
| if (!send_data(mp, us)) |
| putq(q, mp); |
| } |
| return; |
| |
| #if DL_CURRENT_VERSION >= 2 |
| case DL_PHYS_ADDR_REQ: |
| if (size < sizeof(dl_phys_addr_req_t)) |
| goto badprim; |
| |
| /* |
| * Don't check state because ifconfig sends this one down too |
| */ |
| |
| if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, |
| BPRI_HI)) == 0) |
| break; /* should do bufcall */ |
| reply->b_datap->db_type = M_PCPROTO; |
| paddrack = (dl_phys_addr_ack_t *) reply->b_wptr; |
| reply->b_wptr += sizeof(dl_phys_addr_ack_t); |
| bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL); |
| paddrack->dl_primitive = DL_PHYS_ADDR_ACK; |
| paddrack->dl_addr_length = ETHERADDRL; |
| paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t); |
| bcopy(&eaddr, reply->b_wptr, ETHERADDRL); |
| reply->b_wptr += ETHERADDRL; |
| qreply(q, reply); |
| break; |
| |
| #if defined(SOL2) |
| case DL_PROMISCON_REQ: |
| if (size < sizeof(dl_promiscon_req_t)) |
| goto badprim; |
| us->flags |= US_PROMISC; |
| dlpi_ok(q, DL_PROMISCON_REQ); |
| break; |
| |
| case DL_PROMISCOFF_REQ: |
| if (size < sizeof(dl_promiscoff_req_t)) |
| goto badprim; |
| us->flags &= ~US_PROMISC; |
| dlpi_ok(q, DL_PROMISCOFF_REQ); |
| break; |
| #else |
| case DL_PROMISCON_REQ: /* fall thru */ |
| case DL_PROMISCOFF_REQ: /* fall thru */ |
| #endif /* defined(SOL2) */ |
| #endif /* DL_CURRENT_VERSION >= 2 */ |
| |
| #if DL_CURRENT_VERSION >= 2 |
| case DL_SET_PHYS_ADDR_REQ: |
| case DL_SUBS_BIND_REQ: |
| case DL_SUBS_UNBIND_REQ: |
| case DL_ENABMULTI_REQ: |
| case DL_DISABMULTI_REQ: |
| case DL_XID_REQ: |
| case DL_TEST_REQ: |
| case DL_REPLY_UPDATE_REQ: |
| case DL_REPLY_REQ: |
| case DL_DATA_ACK_REQ: |
| #endif |
| case DL_CONNECT_REQ: |
| case DL_TOKEN_REQ: |
| dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0); |
| break; |
| |
| case DL_CONNECT_RES: |
| case DL_DISCONNECT_REQ: |
| case DL_RESET_REQ: |
| case DL_RESET_RES: |
| dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0); |
| break; |
| |
| case DL_UDQOS_REQ: |
| dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0); |
| break; |
| |
| #if DL_CURRENT_VERSION >= 2 |
| case DL_TEST_RES: |
| case DL_XID_RES: |
| break; |
| #endif |
| |
| default: |
| cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive); |
| /* fall through */ |
| badprim: |
| dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0); |
| break; |
| } |
| freemsg(mp); |
| } |
| |
| static void |
| dlpi_error(q, us, prim, err, uerr) |
| queue_t *q; |
| upperstr_t *us; |
| int prim, err, uerr; |
| { |
| mblk_t *reply; |
| dl_error_ack_t *errp; |
| |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err); |
| reply = allocb(sizeof(dl_error_ack_t), BPRI_HI); |
| if (reply == 0) |
| return; /* XXX should do bufcall */ |
| reply->b_datap->db_type = M_PCPROTO; |
| errp = (dl_error_ack_t *) reply->b_wptr; |
| reply->b_wptr += sizeof(dl_error_ack_t); |
| errp->dl_primitive = DL_ERROR_ACK; |
| errp->dl_error_primitive = prim; |
| errp->dl_errno = err; |
| errp->dl_unix_errno = uerr; |
| qreply(q, reply); |
| } |
| |
| static void |
| dlpi_ok(q, prim) |
| queue_t *q; |
| int prim; |
| { |
| mblk_t *reply; |
| dl_ok_ack_t *okp; |
| |
| reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI); |
| if (reply == 0) |
| return; /* XXX should do bufcall */ |
| reply->b_datap->db_type = M_PCPROTO; |
| okp = (dl_ok_ack_t *) reply->b_wptr; |
| reply->b_wptr += sizeof(dl_ok_ack_t); |
| okp->dl_primitive = DL_OK_ACK; |
| okp->dl_correct_primitive = prim; |
| qreply(q, reply); |
| } |
| #endif /* NO_DLPI */ |
| |
| static int |
| pass_packet(us, mp, outbound) |
| upperstr_t *us; |
| mblk_t *mp; |
| int outbound; |
| { |
| int pass; |
| upperstr_t *ppa; |
| |
| if ((ppa = us->ppa) == 0) { |
| freemsg(mp); |
| return 0; |
| } |
| |
| #ifdef FILTER_PACKETS |
| pass = ip_hard_filter(us, mp, outbound); |
| #else |
| /* |
| * Here is where we might, in future, decide whether to pass |
| * or drop the packet, and whether it counts as link activity. |
| */ |
| pass = 1; |
| #endif /* FILTER_PACKETS */ |
| |
| if (pass < 0) { |
| /* pass only if link already up, and don't update time */ |
| if (ppa->lowerq == 0) { |
| freemsg(mp); |
| return 0; |
| } |
| pass = 1; |
| } else if (pass) { |
| if (outbound) |
| ppa->last_sent = time; |
| else |
| ppa->last_recv = time; |
| } |
| |
| return pass; |
| } |
| |
| /* |
| * We have some data to send down to the lower stream (or up the |
| * control stream, if we don't have a lower stream attached). |
| * Returns 1 if the message was dealt with, 0 if it wasn't able |
| * to be sent on and should therefore be queued up. |
| */ |
| static int |
| send_data(mp, us) |
| mblk_t *mp; |
| upperstr_t *us; |
| { |
| upperstr_t *ppa; |
| |
| if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE) |
| return 0; |
| ppa = us->ppa; |
| if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) { |
| if (us->flags & US_DBGLOG) |
| DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode); |
| freemsg(mp); |
| return 1; |
| } |
| if (ppa->lowerq == 0) { |
| /* try to send it up the control stream */ |
| if (bcanputnext(ppa->q, mp->b_band)) { |
| /* |
| * The message seems to get corrupted for some reason if |
| * we just send the message up as it is, so we send a copy. |
| */ |
| mblk_t *np = copymsg(mp); |
| freemsg(mp); |
| if (np != 0) |
| putnext(ppa->q, np); |
| return 1; |
| } |
| } else { |
| if (bcanputnext(ppa->lowerq, mp->b_band)) { |
| MT_ENTER(&ppa->stats_lock); |
| ppa->stats.ppp_opackets++; |
| ppa->stats.ppp_obytes += msgdsize(mp); |
| #ifdef INCR_OPACKETS |
| INCR_OPACKETS(ppa); |
| #endif |
| MT_EXIT(&ppa->stats_lock); |
| /* |
| * The lower queue is only ever detached while holding an |
| * exclusive lock on the whole driver. So we can be confident |
| * that the lower queue is still there. |
| */ |
| putnext(ppa->lowerq, mp); |
| return 1; |
| } |
| } |
| us->flags |= US_BLOCKED; |
| return 0; |
| } |
| |
| /* |
| * Allocate a new PPA id and link this stream into the list of PPAs. |
| * This procedure is called with an exclusive lock on all queues in |
| * this driver. |
| */ |
| static void |
| new_ppa(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us, *up, **usp; |
| int ppa_id; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("new_ppa: q_ptr = 0!\n"); |
| return; |
| } |
| |
| usp = &ppas; |
| ppa_id = 0; |
| while ((up = *usp) != 0 && ppa_id == up->ppa_id) { |
| ++ppa_id; |
| usp = &up->nextppa; |
| } |
| us->ppa_id = ppa_id; |
| us->ppa = us; |
| us->next = 0; |
| us->nextppa = *usp; |
| *usp = us; |
| us->flags |= US_CONTROL; |
| us->npmode = NPMODE_PASS; |
| |
| us->mtu = PPP_MTU; |
| us->mru = PPP_MRU; |
| |
| #ifdef SOL2 |
| /* |
| * Create a kstats record for our statistics, so netstat -i works. |
| */ |
| if (us->kstats == 0) { |
| char unit[32]; |
| |
| sprintf(unit, "ppp%d", us->ppa->ppa_id); |
| us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit, |
| "net", KSTAT_TYPE_NAMED, 4, 0); |
| if (us->kstats != 0) { |
| kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats); |
| |
| strcpy(kn[0].name, "ipackets"); |
| kn[0].data_type = KSTAT_DATA_ULONG; |
| strcpy(kn[1].name, "ierrors"); |
| kn[1].data_type = KSTAT_DATA_ULONG; |
| strcpy(kn[2].name, "opackets"); |
| kn[2].data_type = KSTAT_DATA_ULONG; |
| strcpy(kn[3].name, "oerrors"); |
| kn[3].data_type = KSTAT_DATA_ULONG; |
| kstat_install(us->kstats); |
| } |
| } |
| #endif /* SOL2 */ |
| |
| *(int *)mp->b_cont->b_rptr = ppa_id; |
| mp->b_datap->db_type = M_IOCACK; |
| qreply(q, mp); |
| } |
| |
| static void |
| attach_ppa(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us, *t; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("attach_ppa: q_ptr = 0!\n"); |
| return; |
| } |
| |
| #ifndef NO_DLPI |
| us->state = DL_UNBOUND; |
| #endif |
| for (t = us->ppa; t->next != 0; t = t->next) |
| ; |
| t->next = us; |
| us->next = 0; |
| if (mp->b_datap->db_type == M_IOCTL) { |
| mp->b_datap->db_type = M_IOCACK; |
| qreply(q, mp); |
| } else { |
| #ifndef NO_DLPI |
| dlpi_ok(q, DL_ATTACH_REQ); |
| #endif |
| } |
| } |
| |
| static void |
| detach_ppa(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us, *t; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("detach_ppa: q_ptr = 0!\n"); |
| return; |
| } |
| |
| for (t = us->ppa; t->next != 0; t = t->next) |
| if (t->next == us) { |
| t->next = us->next; |
| break; |
| } |
| us->next = 0; |
| us->ppa = 0; |
| #ifndef NO_DLPI |
| us->state = DL_UNATTACHED; |
| dlpi_ok(q, DL_DETACH_REQ); |
| #endif |
| } |
| |
| /* |
| * We call this with qwriter in order to give the upper queue procedures |
| * the guarantee that the lower queue is not going to go away while |
| * they are executing. |
| */ |
| static void |
| detach_lower(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("detach_lower: q_ptr = 0!\n"); |
| return; |
| } |
| |
| LOCK_LOWER_W; |
| us->lowerq->q_ptr = 0; |
| RD(us->lowerq)->q_ptr = 0; |
| us->lowerq = 0; |
| UNLOCK_LOWER; |
| |
| /* Unblock streams which now feed back up the control stream. */ |
| qenable(us->q); |
| |
| mp->b_datap->db_type = M_IOCACK; |
| qreply(q, mp); |
| } |
| |
| static int |
| pppuwsrv(q) |
| queue_t *q; |
| { |
| upperstr_t *us, *as; |
| mblk_t *mp; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("pppuwsrv: q_ptr = 0!\n"); |
| return 0; |
| } |
| |
| /* |
| * If this is a control stream, then this service procedure |
| * probably got enabled because of flow control in the lower |
| * stream being enabled (or because of the lower stream going |
| * away). Therefore we enable the service procedure of all |
| * attached upper streams. |
| */ |
| if (us->flags & US_CONTROL) { |
| for (as = us->next; as != 0; as = as->next) |
| qenable(WR(as->q)); |
| } |
| |
| /* Try to send on any data queued here. */ |
| us->flags &= ~US_BLOCKED; |
| while ((mp = getq(q)) != 0) { |
| if (!send_data(mp, us)) { |
| putbq(q, mp); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* should never get called... */ |
| static int |
| ppplwput(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| putnext(q, mp); |
| return 0; |
| } |
| |
| static int |
| ppplwsrv(q) |
| queue_t *q; |
| { |
| queue_t *uq; |
| |
| /* |
| * Flow control has back-enabled this stream: |
| * enable the upper write service procedure for |
| * the upper control stream for this lower stream. |
| */ |
| LOCK_LOWER_R; |
| uq = (queue_t *) q->q_ptr; |
| if (uq != 0) |
| qenable(uq); |
| UNLOCK_LOWER; |
| return 0; |
| } |
| |
| /* |
| * This should only get called for control streams. |
| */ |
| static int |
| pppurput(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *ppa, *us; |
| int proto, len; |
| struct iocblk *iop; |
| |
| ppa = (upperstr_t *) q->q_ptr; |
| if (ppa == 0) { |
| DPRINT("pppurput: q_ptr = 0!\n"); |
| return 0; |
| } |
| |
| switch (mp->b_datap->db_type) { |
| case M_CTL: |
| MT_ENTER(&ppa->stats_lock); |
| switch (*mp->b_rptr) { |
| case PPPCTL_IERROR: |
| #ifdef INCR_IERRORS |
| INCR_IERRORS(ppa); |
| #endif |
| ppa->stats.ppp_ierrors++; |
| break; |
| case PPPCTL_OERROR: |
| #ifdef INCR_OERRORS |
| INCR_OERRORS(ppa); |
| #endif |
| ppa->stats.ppp_oerrors++; |
| break; |
| } |
| MT_EXIT(&ppa->stats_lock); |
| freemsg(mp); |
| break; |
| |
| case M_IOCACK: |
| case M_IOCNAK: |
| /* |
| * Attempt to match up the response with the stream |
| * that the request came from. |
| */ |
| iop = (struct iocblk *) mp->b_rptr; |
| for (us = ppa; us != 0; us = us->next) |
| if (us->ioc_id == iop->ioc_id) |
| break; |
| if (us == 0) |
| freemsg(mp); |
| else |
| putnext(us->q, mp); |
| break; |
| |
| case M_HANGUP: |
| /* |
| * The serial device has hung up. We don't want to send |
| * the M_HANGUP message up to pppd because that will stop |
| * us from using the control stream any more. Instead we |
| * send a zero-length message as an end-of-file indication. |
| */ |
| freemsg(mp); |
| mp = allocb(1, BPRI_HI); |
| if (mp == 0) { |
| DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn); |
| break; |
| } |
| putnext(ppa->q, mp); |
| break; |
| |
| default: |
| if (mp->b_datap->db_type == M_DATA) { |
| len = msgdsize(mp); |
| if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) { |
| PULLUP(mp, PPP_HDRLEN); |
| if (mp == 0) { |
| DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len); |
| break; |
| } |
| } |
| MT_ENTER(&ppa->stats_lock); |
| ppa->stats.ppp_ipackets++; |
| ppa->stats.ppp_ibytes += len; |
| #ifdef INCR_IPACKETS |
| INCR_IPACKETS(ppa); |
| #endif |
| MT_EXIT(&ppa->stats_lock); |
| |
| proto = PPP_PROTOCOL(mp->b_rptr); |
| |
| #if defined(SOL2) |
| /* |
| * Should there be any promiscuous stream(s), send the data |
| * up for each promiscuous stream that we recognize. |
| */ |
| promisc_sendup(ppa, mp, proto, 1); |
| #endif /* defined(SOL2) */ |
| |
| if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) { |
| /* |
| * A data packet for some network protocol. |
| * Queue it on the upper stream for that protocol. |
| * XXX could we just putnext it? (would require thought) |
| * The rblocked flag is there to ensure that we keep |
| * messages in order for each network protocol. |
| */ |
| if (!pass_packet(us, mp, 0)) |
| break; |
| if (!us->rblocked && !canput(us->q)) |
| us->rblocked = 1; |
| if (!us->rblocked) |
| putq(us->q, mp); |
| else |
| putq(q, mp); |
| break; |
| } |
| } |
| /* |
| * A control frame, a frame for an unknown protocol, |
| * or some other message type. |
| * Send it up to pppd via the control stream. |
| */ |
| if (queclass(mp) == QPCTL || canputnext(ppa->q)) |
| putnext(ppa->q, mp); |
| else |
| putq(q, mp); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| pppursrv(q) |
| queue_t *q; |
| { |
| upperstr_t *us, *as; |
| mblk_t *mp, *hdr; |
| #ifndef NO_DLPI |
| dl_unitdata_ind_t *ud; |
| #endif |
| int proto; |
| |
| us = (upperstr_t *) q->q_ptr; |
| if (us == 0) { |
| DPRINT("pppursrv: q_ptr = 0!\n"); |
| return 0; |
| } |
| |
| if (us->flags & US_CONTROL) { |
| /* |
| * A control stream. |
| * If there is no lower queue attached, run the write service |
| * routines of other upper streams attached to this PPA. |
| */ |
| if (us->lowerq == 0) { |
| as = us; |
| do { |
| if (as->flags & US_BLOCKED) |
| qenable(WR(as->q)); |
| as = as->next; |
| } while (as != 0); |
| } |
| |
| /* |
| * Messages get queued on this stream's read queue if they |
| * can't be queued on the read queue of the attached stream |
| * that they are destined for. This is for flow control - |
| * when this queue fills up, the lower read put procedure will |
| * queue messages there and the flow control will propagate |
| * down from there. |
| */ |
| while ((mp = getq(q)) != 0) { |
| proto = PPP_PROTOCOL(mp->b_rptr); |
| if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) { |
| if (!canput(as->q)) |
| break; |
| putq(as->q, mp); |
| } else { |
| if (!canputnext(q)) |
| break; |
| putnext(q, mp); |
| } |
| } |
| if (mp) { |
| putbq(q, mp); |
| } else { |
| /* can now put stuff directly on network protocol streams again */ |
| for (as = us->next; as != 0; as = as->next) |
| as->rblocked = 0; |
| } |
| |
| /* |
| * If this stream has a lower stream attached, |
| * enable the read queue's service routine. |
| * XXX we should really only do this if the queue length |
| * has dropped below the low-water mark. |
| */ |
| if (us->lowerq != 0) |
| qenable(RD(us->lowerq)); |
| |
| } else { |
| /* |
| * A network protocol stream. Put a DLPI header on each |
| * packet and send it on. |
| * (Actually, it seems that the IP module will happily |
| * accept M_DATA messages without the DL_UNITDATA_IND header.) |
| */ |
| while ((mp = getq(q)) != 0) { |
| if (!canputnext(q)) { |
| putbq(q, mp); |
| break; |
| } |
| #ifndef NO_DLPI |
| proto = PPP_PROTOCOL(mp->b_rptr); |
| mp->b_rptr += PPP_HDRLEN; |
| hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint), |
| BPRI_MED); |
| if (hdr == 0) { |
| /* XXX should put it back and use bufcall */ |
| freemsg(mp); |
| continue; |
| } |
| hdr->b_datap->db_type = M_PROTO; |
| ud = (dl_unitdata_ind_t *) hdr->b_wptr; |
| hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint); |
| hdr->b_cont = mp; |
| ud->dl_primitive = DL_UNITDATA_IND; |
| ud->dl_dest_addr_length = sizeof(uint); |
| ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t); |
| ud->dl_src_addr_length = sizeof(uint); |
| ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint); |
| #if DL_CURRENT_VERSION >= 2 |
| ud->dl_group_address = 0; |
| #endif |
| /* Send the DLPI client the data with the SAP they requested, |
| (e.g. ETHERTYPE_IP) rather than the PPP protocol number |
| (e.g. PPP_IP) */ |
| ((uint *)(ud + 1))[0] = us->req_sap; /* dest SAP */ |
| ((uint *)(ud + 1))[1] = us->req_sap; /* src SAP */ |
| putnext(q, hdr); |
| #else /* NO_DLPI */ |
| putnext(q, mp); |
| #endif /* NO_DLPI */ |
| } |
| /* |
| * Now that we have consumed some packets from this queue, |
| * enable the control stream's read service routine so that we |
| * can process any packets for us that might have got queued |
| * there for flow control reasons. |
| */ |
| if (us->ppa) |
| qenable(us->ppa->q); |
| } |
| |
| return 0; |
| } |
| |
| static upperstr_t * |
| find_dest(ppa, proto) |
| upperstr_t *ppa; |
| int proto; |
| { |
| upperstr_t *us; |
| |
| for (us = ppa->next; us != 0; us = us->next) |
| if (proto == us->sap) |
| break; |
| return us; |
| } |
| |
| #if defined (SOL2) |
| /* |
| * Test upstream promiscuous conditions. As of now, only pass IPv4 and |
| * Ipv6 packets upstream (let PPP packets be decoded elsewhere). |
| */ |
| static upperstr_t * |
| find_promisc(us, proto) |
| upperstr_t *us; |
| int proto; |
| { |
| |
| if ((proto != PPP_IP) && (proto != PPP_IPV6)) |
| return (upperstr_t *)0; |
| |
| for ( ; us; us = us->next) { |
| if ((us->flags & US_PROMISC) && (us->state == DL_IDLE)) |
| return us; |
| } |
| |
| return (upperstr_t *)0; |
| } |
| |
| /* |
| * Prepend an empty Ethernet header to msg for snoop, et al. |
| */ |
| static mblk_t * |
| prepend_ether(us, mp, proto) |
| upperstr_t *us; |
| mblk_t *mp; |
| int proto; |
| { |
| mblk_t *eh; |
| int type; |
| |
| if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) { |
| freemsg(mp); |
| return (mblk_t *)0; |
| } |
| |
| if (proto == PPP_IP) |
| type = ETHERTYPE_IP; |
| else if (proto == PPP_IPV6) |
| type = ETHERTYPE_IPV6; |
| else |
| type = proto; /* What else? Let decoder decide */ |
| |
| eh->b_wptr += sizeof(struct ether_header); |
| bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header)); |
| ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type); |
| eh->b_cont = mp; |
| return (eh); |
| } |
| |
| /* |
| * Prepend DL_UNITDATA_IND mblk to msg |
| */ |
| static mblk_t * |
| prepend_udind(us, mp, proto) |
| upperstr_t *us; |
| mblk_t *mp; |
| int proto; |
| { |
| dl_unitdata_ind_t *dlu; |
| mblk_t *dh; |
| size_t size; |
| |
| size = sizeof(dl_unitdata_ind_t); |
| if ((dh = allocb(size, BPRI_MED)) == 0) { |
| freemsg(mp); |
| return (mblk_t *)0; |
| } |
| |
| dh->b_datap->db_type = M_PROTO; |
| dh->b_wptr = dh->b_datap->db_lim; |
| dh->b_rptr = dh->b_wptr - size; |
| |
| dlu = (dl_unitdata_ind_t *)dh->b_rptr; |
| dlu->dl_primitive = DL_UNITDATA_IND; |
| dlu->dl_dest_addr_length = 0; |
| dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t); |
| dlu->dl_src_addr_length = 0; |
| dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t); |
| dlu->dl_group_address = 0; |
| |
| dh->b_cont = mp; |
| return (dh); |
| } |
| |
| /* |
| * For any recognized promiscuous streams, send data upstream |
| */ |
| static void |
| promisc_sendup(ppa, mp, proto, skip) |
| upperstr_t *ppa; |
| mblk_t *mp; |
| int proto, skip; |
| { |
| mblk_t *dup_mp, *dup_dup_mp; |
| upperstr_t *prus, *nprus; |
| |
| if ((prus = find_promisc(ppa, proto)) != 0) { |
| if (dup_mp = dupmsg(mp)) { |
| |
| if (skip) |
| dup_mp->b_rptr += PPP_HDRLEN; |
| |
| for ( ; nprus = find_promisc(prus->next, proto); |
| prus = nprus) { |
| |
| if (dup_dup_mp = dupmsg(dup_mp)) { |
| if (canputnext(prus->q)) { |
| if (prus->flags & US_RAWDATA) { |
| dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto); |
| putnext(prus->q, dup_dup_mp); |
| } else { |
| dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto); |
| putnext(prus->q, dup_dup_mp); |
| } |
| } else { |
| DPRINT("ppp_urput: data to promisc q dropped\n"); |
| freemsg(dup_dup_mp); |
| } |
| } |
| } |
| |
| if (canputnext(prus->q)) { |
| if (prus->flags & US_RAWDATA) { |
| dup_mp = prepend_ether(prus, dup_mp, proto); |
| putnext(prus->q, dup_mp); |
| } else { |
| dup_mp = prepend_udind(prus, dup_mp, proto); |
| putnext(prus->q, dup_mp); |
| } |
| } else { |
| DPRINT("ppp_urput: data to promisc q dropped\n"); |
| freemsg(dup_mp); |
| } |
| } |
| } |
| } |
| #endif /* defined(SOL2) */ |
| |
| /* |
| * We simply put the message on to the associated upper control stream |
| * (either here or in ppplrsrv). That way we enter the perimeters |
| * before looking through the list of attached streams to decide which |
| * stream it should go up. |
| */ |
| static int |
| ppplrput(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| queue_t *uq; |
| struct iocblk *iop; |
| |
| switch (mp->b_datap->db_type) { |
| case M_IOCTL: |
| iop = (struct iocblk *) mp->b_rptr; |
| iop->ioc_error = EINVAL; |
| mp->b_datap->db_type = M_IOCNAK; |
| qreply(q, mp); |
| return 0; |
| case M_FLUSH: |
| if (*mp->b_rptr & FLUSHR) |
| flushq(q, FLUSHDATA); |
| if (*mp->b_rptr & FLUSHW) { |
| *mp->b_rptr &= ~FLUSHR; |
| qreply(q, mp); |
| } else |
| freemsg(mp); |
| return 0; |
| } |
| |
| /* |
| * If we can't get the lower lock straight away, queue this one |
| * rather than blocking, to avoid the possibility of deadlock. |
| */ |
| if (!TRYLOCK_LOWER_R) { |
| putq(q, mp); |
| return 0; |
| } |
| |
| /* |
| * Check that we're still connected to the driver. |
| */ |
| uq = (queue_t *) q->q_ptr; |
| if (uq == 0) { |
| UNLOCK_LOWER; |
| DPRINT1("ppplrput: q = %x, uq = 0??\n", q); |
| freemsg(mp); |
| return 0; |
| } |
| |
| /* |
| * Try to forward the message to the put routine for the upper |
| * control stream for this lower stream. |
| * If there are already messages queued here, queue this one so |
| * they don't get out of order. |
| */ |
| if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq))) |
| put(uq, mp); |
| else |
| putq(q, mp); |
| |
| UNLOCK_LOWER; |
| return 0; |
| } |
| |
| static int |
| ppplrsrv(q) |
| queue_t *q; |
| { |
| mblk_t *mp; |
| queue_t *uq; |
| |
| /* |
| * Packets get queued here for flow control reasons |
| * or if the lrput routine couldn't get the lower lock |
| * without blocking. |
| */ |
| LOCK_LOWER_R; |
| uq = (queue_t *) q->q_ptr; |
| if (uq == 0) { |
| UNLOCK_LOWER; |
| flushq(q, FLUSHALL); |
| DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q); |
| return 0; |
| } |
| while ((mp = getq(q)) != 0) { |
| if (queclass(mp) == QPCTL || canput(uq)) |
| put(uq, mp); |
| else { |
| putbq(q, mp); |
| break; |
| } |
| } |
| UNLOCK_LOWER; |
| return 0; |
| } |
| |
| static int |
| putctl2(q, type, code, val) |
| queue_t *q; |
| int type, code, val; |
| { |
| mblk_t *mp; |
| |
| mp = allocb(2, BPRI_HI); |
| if (mp == 0) |
| return 0; |
| mp->b_datap->db_type = type; |
| mp->b_wptr[0] = code; |
| mp->b_wptr[1] = val; |
| mp->b_wptr += 2; |
| putnext(q, mp); |
| return 1; |
| } |
| |
| static int |
| putctl4(q, type, code, val) |
| queue_t *q; |
| int type, code, val; |
| { |
| mblk_t *mp; |
| |
| mp = allocb(4, BPRI_HI); |
| if (mp == 0) |
| return 0; |
| mp->b_datap->db_type = type; |
| mp->b_wptr[0] = code; |
| ((short *)mp->b_wptr)[1] = val; |
| mp->b_wptr += 4; |
| putnext(q, mp); |
| return 1; |
| } |
| |
| static void |
| debug_dump(q, mp) |
| queue_t *q; |
| mblk_t *mp; |
| { |
| upperstr_t *us; |
| queue_t *uq, *lq; |
| |
| DPRINT("ppp upper streams:\n"); |
| for (us = minor_devs; us != 0; us = us->nextmn) { |
| uq = us->q; |
| DPRINT3(" %d: q=%x rlev=%d", |
| us->mn, uq, (uq? qsize(uq): 0)); |
| DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0), |
| us->flags, "\020\1priv\2control\3blocked\4last"); |
| DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap, |
| us->req_sap); |
| if (us->ppa == 0) |
| DPRINT(" ppa=?\n"); |
| else |
| DPRINT1(" ppa=%d\n", us->ppa->ppa_id); |
| if (us->flags & US_CONTROL) { |
| lq = us->lowerq; |
| DPRINT3(" control for %d lq=%x rlev=%d", |
| us->ppa_id, lq, (lq? qsize(RD(lq)): 0)); |
| DPRINT3(" wlev=%d mru=%d mtu=%d\n", |
| (lq? qsize(lq): 0), us->mru, us->mtu); |
| } |
| } |
| mp->b_datap->db_type = M_IOCACK; |
| qreply(q, mp); |
| } |
| |
| #ifdef FILTER_PACKETS |
| #include <netinet/in_systm.h> |
| #include <netinet/ip.h> |
| #include <netinet/udp.h> |
| #include <netinet/tcp.h> |
| |
| #define MAX_IPHDR 128 /* max TCP/IP header size */ |
| |
| |
| /* The following table contains a hard-coded list of protocol/port pairs. |
| * Any matching packets are either discarded unconditionally, or, |
| * if ok_if_link_up is non-zero when a connection does not currently exist |
| * (i.e., they go through if the connection is present, but never initiate |
| * a dial-out). |
| * This idea came from a post by dm@garage.uun.org (David Mazieres) |
| */ |
| static struct pktfilt_tab { |
| int proto; |
| u_short port; |
| u_short ok_if_link_up; |
| } pktfilt_tab[] = { |
| { IPPROTO_UDP, 520, 1 }, /* RIP, ok to pass if link is up */ |
| { IPPROTO_UDP, 123, 1 }, /* NTP, don't keep up the link for it */ |
| { -1, 0, 0 } /* terminator entry has port == -1 */ |
| }; |
| |
| |
| static int |
| ip_hard_filter(us, mp, outbound) |
| upperstr_t *us; |
| mblk_t *mp; |
| int outbound; |
| { |
| struct ip *ip; |
| struct pktfilt_tab *pft; |
| mblk_t *temp_mp; |
| int proto; |
| int len, hlen; |
| |
| |
| /* Note, the PPP header has already been pulled up in all cases */ |
| proto = PPP_PROTOCOL(mp->b_rptr); |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound); |
| |
| switch (proto) |
| { |
| case PPP_IP: |
| if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) { |
| temp_mp = mp->b_cont; |
| len = msgdsize(temp_mp); |
| hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR; |
| PULLUP(temp_mp, hlen); |
| if (temp_mp == 0) { |
| DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", |
| us->mn, hlen); |
| mp->b_cont = 0; /* PULLUP() freed the rest */ |
| freemsg(mp); |
| return 0; |
| } |
| ip = (struct ip *)mp->b_cont->b_rptr; |
| } |
| else { |
| len = msgdsize(mp); |
| hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR); |
| PULLUP(mp, hlen); |
| if (mp == 0) { |
| DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", |
| us->mn, hlen); |
| return 0; |
| } |
| ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN); |
| } |
| |
| /* For IP traffic, certain packets (e.g., RIP) may be either |
| * 1. ignored - dropped completely |
| * 2. will not initiate a connection, but |
| * will be passed if a connection is currently up. |
| */ |
| for (pft=pktfilt_tab; pft->proto != -1; pft++) { |
| if (ip->ip_p == pft->proto) { |
| switch(pft->proto) { |
| case IPPROTO_UDP: |
| if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport |
| == htons(pft->port)) goto endfor; |
| break; |
| case IPPROTO_TCP: |
| if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport |
| == htons(pft->port)) goto endfor; |
| break; |
| } |
| } |
| } |
| endfor: |
| if (pft->proto != -1) { |
| if (us->flags & US_DBGLOG) |
| DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", |
| us->mn, pft->proto, pft->port); |
| /* Discard if not connected, or if not pass_with_link_up */ |
| /* else, if link is up let go by, but don't update time */ |
| return pft->ok_if_link_up? -1: 0; |
| } |
| break; |
| } /* end switch (proto) */ |
| |
| return 1; |
| } |
| #endif /* FILTER_PACKETS */ |
| |