| ///////////////////////////////////////////////////////////////////////// |
| // $Id$ |
| ///////////////////////////////////////////////////////////////////////// |
| // |
| // 32 bit Bochs BIOS init code |
| // Copyright (C) 2006 Fabrice Bellard |
| // |
| // This library is free software; you can redistribute it and/or |
| // modify it under the terms of the GNU Lesser General Public |
| // License as published by the Free Software Foundation; either |
| // version 2 of the License, or (at your option) any later version. |
| // |
| // This library is distributed in the hope that it will be useful, |
| // but WITHOUT ANY WARRANTY; without even the implied warranty of |
| // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| // Lesser General Public License for more details. |
| // |
| // You should have received a copy of the GNU Lesser General Public |
| // License along with this library; if not, write to the Free Software |
| // Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| #include <stdarg.h> |
| #include <stddef.h> |
| |
| #include "rombios.h" |
| |
| typedef signed char int8_t; |
| typedef short int16_t; |
| typedef int int32_t; |
| typedef long long int64_t; |
| typedef unsigned char uint8_t; |
| typedef unsigned short uint16_t; |
| typedef unsigned int uint32_t; |
| typedef unsigned long long uint64_t; |
| |
| /* if true, put the MP float table and ACPI RSDT in EBDA and the MP |
| table in RAM. Unfortunately, Linux has bugs with that, so we prefer |
| to modify the BIOS in shadow RAM */ |
| //#define BX_USE_EBDA_TABLES |
| |
| /* define it if the (emulated) hardware supports SMM mode */ |
| #define BX_USE_SMM |
| |
| #define cpuid(index, eax, ebx, ecx, edx) \ |
| asm volatile ("cpuid" \ |
| : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) \ |
| : "0" (index)) |
| |
| #define wbinvd() asm volatile("wbinvd") |
| |
| #define CPUID_MSR (1 << 5) |
| #define CPUID_APIC (1 << 9) |
| #define CPUID_MTRR (1 << 12) |
| |
| #define APIC_BASE ((uint8_t *)0xfee00000) |
| #define APIC_ICR_LOW 0x300 |
| #define APIC_SVR 0x0F0 |
| #define APIC_ID 0x020 |
| #define APIC_LVT3 0x370 |
| |
| #define APIC_ENABLED 0x0100 |
| |
| #define AP_BOOT_ADDR 0x9f000 |
| |
| #define MPTABLE_MAX_SIZE 0x00002000 |
| #define SMI_CMD_IO_ADDR 0xb2 |
| |
| #define BIOS_TMP_STORAGE 0x00030000 /* 64 KB used to copy the BIOS to shadow RAM */ |
| |
| #define MSR_MTRRcap 0x000000fe |
| #define MSR_MTRRfix64K_00000 0x00000250 |
| #define MSR_MTRRfix16K_80000 0x00000258 |
| #define MSR_MTRRfix16K_A0000 0x00000259 |
| #define MSR_MTRRfix4K_C0000 0x00000268 |
| #define MSR_MTRRfix4K_C8000 0x00000269 |
| #define MSR_MTRRfix4K_D0000 0x0000026a |
| #define MSR_MTRRfix4K_D8000 0x0000026b |
| #define MSR_MTRRfix4K_E0000 0x0000026c |
| #define MSR_MTRRfix4K_E8000 0x0000026d |
| #define MSR_MTRRfix4K_F0000 0x0000026e |
| #define MSR_MTRRfix4K_F8000 0x0000026f |
| #define MSR_MTRRdefType 0x000002ff |
| |
| #define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg)) |
| #define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1) |
| |
| static inline void outl(int addr, int val) |
| { |
| asm volatile ("outl %1, %w0" : : "d" (addr), "a" (val)); |
| } |
| |
| static inline void outw(int addr, int val) |
| { |
| asm volatile ("outw %w1, %w0" : : "d" (addr), "a" (val)); |
| } |
| |
| static inline void outb(int addr, int val) |
| { |
| asm volatile ("outb %b1, %w0" : : "d" (addr), "a" (val)); |
| } |
| |
| static inline uint32_t inl(int addr) |
| { |
| uint32_t val; |
| asm volatile ("inl %w1, %0" : "=a" (val) : "d" (addr)); |
| return val; |
| } |
| |
| static inline uint16_t inw(int addr) |
| { |
| uint16_t val; |
| asm volatile ("inw %w1, %w0" : "=a" (val) : "d" (addr)); |
| return val; |
| } |
| |
| static inline uint8_t inb(int addr) |
| { |
| uint8_t val; |
| asm volatile ("inb %w1, %b0" : "=a" (val) : "d" (addr)); |
| return val; |
| } |
| |
| static inline void writel(void *addr, uint32_t val) |
| { |
| *(volatile uint32_t *)addr = val; |
| } |
| |
| static inline void writew(void *addr, uint16_t val) |
| { |
| *(volatile uint16_t *)addr = val; |
| } |
| |
| static inline void writeb(void *addr, uint8_t val) |
| { |
| *(volatile uint8_t *)addr = val; |
| } |
| |
| static inline uint32_t readl(const void *addr) |
| { |
| return *(volatile const uint32_t *)addr; |
| } |
| |
| static inline uint16_t readw(const void *addr) |
| { |
| return *(volatile const uint16_t *)addr; |
| } |
| |
| static inline uint8_t readb(const void *addr) |
| { |
| return *(volatile const uint8_t *)addr; |
| } |
| |
| static inline void putc(int c) |
| { |
| outb(INFO_PORT, c); |
| } |
| |
| static uint64_t rdmsr(unsigned index) |
| { |
| unsigned long long ret; |
| |
| asm ("rdmsr" : "=A"(ret) : "c"(index)); |
| return ret; |
| } |
| |
| static void wrmsr(unsigned index, uint64_t val) |
| { |
| asm volatile ("wrmsr" : : "c"(index), "A"(val)); |
| } |
| |
| static inline int isdigit(int c) |
| { |
| return c >= '0' && c <= '9'; |
| } |
| |
| void *memset(void *d1, int val, size_t len) |
| { |
| uint8_t *d = d1; |
| |
| while (len--) { |
| *d++ = val; |
| } |
| return d1; |
| } |
| |
| void *memcpy(void *d1, const void *s1, size_t len) |
| { |
| uint8_t *d = d1; |
| const uint8_t *s = s1; |
| |
| while (len--) { |
| *d++ = *s++; |
| } |
| return d1; |
| } |
| |
| void *memmove(void *d1, const void *s1, size_t len) |
| { |
| uint8_t *d = d1; |
| const uint8_t *s = s1; |
| |
| if (d <= s) { |
| while (len--) { |
| *d++ = *s++; |
| } |
| } else { |
| d += len; |
| s += len; |
| while (len--) { |
| *--d = *--s; |
| } |
| } |
| return d1; |
| } |
| |
| int memcmp(const void *s1, const void *s2, size_t len) |
| { |
| const int8_t *p1 = s1; |
| const int8_t *p2 = s2; |
| |
| while (len--) { |
| int r = *p1++ - *p2++; |
| if(r) |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| size_t strlen(const char *s) |
| { |
| const char *s1; |
| for(s1 = s; *s1 != '\0'; s1++); |
| return s1 - s; |
| } |
| |
| /* from BSD ppp sources */ |
| int vsnprintf(char *buf, int buflen, const char *fmt, va_list args) |
| { |
| int c, i, n; |
| int width, prec, fillch; |
| int base, len, neg; |
| unsigned long val = 0; |
| const char *f; |
| char *str, *buf0; |
| char num[32]; |
| static const char hexchars[] = "0123456789abcdef"; |
| |
| buf0 = buf; |
| --buflen; |
| while (buflen > 0) { |
| for (f = fmt; *f != '%' && *f != 0; ++f) |
| ; |
| if (f > fmt) { |
| len = f - fmt; |
| if (len > buflen) |
| len = buflen; |
| memcpy(buf, fmt, len); |
| buf += len; |
| buflen -= len; |
| fmt = f; |
| } |
| if (*fmt == 0) |
| break; |
| c = *++fmt; |
| width = prec = 0; |
| fillch = ' '; |
| if (c == '0') { |
| fillch = '0'; |
| c = *++fmt; |
| } |
| if (c == '*') { |
| width = va_arg(args, int); |
| c = *++fmt; |
| } else { |
| while (isdigit(c)) { |
| width = width * 10 + c - '0'; |
| c = *++fmt; |
| } |
| } |
| if (c == '.') { |
| c = *++fmt; |
| if (c == '*') { |
| prec = va_arg(args, int); |
| c = *++fmt; |
| } else { |
| while (isdigit(c)) { |
| prec = prec * 10 + c - '0'; |
| c = *++fmt; |
| } |
| } |
| } |
| /* modifiers */ |
| switch(c) { |
| case 'l': |
| c = *++fmt; |
| break; |
| default: |
| break; |
| } |
| str = 0; |
| base = 0; |
| neg = 0; |
| ++fmt; |
| switch (c) { |
| case 'd': |
| i = va_arg(args, int); |
| if (i < 0) { |
| neg = 1; |
| val = -i; |
| } else |
| val = i; |
| base = 10; |
| break; |
| case 'o': |
| val = va_arg(args, unsigned int); |
| base = 8; |
| break; |
| case 'x': |
| case 'X': |
| val = va_arg(args, unsigned int); |
| base = 16; |
| break; |
| case 'p': |
| val = (unsigned long) va_arg(args, void *); |
| base = 16; |
| neg = 2; |
| break; |
| case 's': |
| str = va_arg(args, char *); |
| break; |
| case 'c': |
| num[0] = va_arg(args, int); |
| num[1] = 0; |
| str = num; |
| break; |
| default: |
| *buf++ = '%'; |
| if (c != '%') |
| --fmt; /* so %z outputs %z etc. */ |
| --buflen; |
| continue; |
| } |
| if (base != 0) { |
| str = num + sizeof(num); |
| *--str = 0; |
| while (str > num + neg) { |
| *--str = hexchars[val % base]; |
| val = val / base; |
| if (--prec <= 0 && val == 0) |
| break; |
| } |
| switch (neg) { |
| case 1: |
| *--str = '-'; |
| break; |
| case 2: |
| *--str = 'x'; |
| *--str = '0'; |
| break; |
| } |
| len = num + sizeof(num) - 1 - str; |
| } else { |
| len = strlen(str); |
| if (prec > 0 && len > prec) |
| len = prec; |
| } |
| if (width > 0) { |
| if (width > buflen) |
| width = buflen; |
| if ((n = width - len) > 0) { |
| buflen -= n; |
| for (; n > 0; --n) |
| *buf++ = fillch; |
| } |
| } |
| if (len > buflen) |
| len = buflen; |
| memcpy(buf, str, len); |
| buf += len; |
| buflen -= len; |
| } |
| *buf = 0; |
| return buf - buf0; |
| } |
| |
| int snprintf(char * buf, size_t size, const char *fmt, ...) |
| { |
| va_list args; |
| int i; |
| |
| va_start(args, fmt); |
| i=vsnprintf(buf,size,fmt,args); |
| va_end(args); |
| return i; |
| } |
| |
| void bios_printf(int flags, const char *fmt, ...) |
| { |
| va_list ap; |
| char buf[1024]; |
| const char *s; |
| |
| if ((flags & BIOS_PRINTF_DEBHALT) == BIOS_PRINTF_DEBHALT) |
| outb(PANIC_PORT2, 0x00); |
| |
| va_start(ap, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, ap); |
| s = buf; |
| while (*s) |
| putc(*s++); |
| va_end(ap); |
| } |
| |
| void delay_ms(int n) |
| { |
| int i, j; |
| for(i = 0; i < n; i++) { |
| #ifdef BX_QEMU |
| /* approximative ! */ |
| for(j = 0; j < 1000000; j++); |
| #else |
| { |
| int r1, r2; |
| j = 66; |
| r1 = inb(0x61) & 0x10; |
| do { |
| r2 = inb(0x61) & 0x10; |
| if (r1 != r2) { |
| j--; |
| r1 = r2; |
| } |
| } while (j > 0); |
| } |
| #endif |
| } |
| } |
| |
| uint16_t smp_cpus; |
| uint32_t cpuid_signature; |
| uint32_t cpuid_features; |
| uint32_t cpuid_ext_features; |
| unsigned long ram_size; |
| uint64_t ram_end; |
| #ifdef BX_USE_EBDA_TABLES |
| unsigned long ebda_cur_addr; |
| #endif |
| int acpi_enabled; |
| uint32_t pm_io_base, smb_io_base; |
| int pm_sci_int; |
| unsigned long bios_table_cur_addr; |
| unsigned long bios_table_end_addr; |
| |
| static inline uint64_t le64_to_cpu(uint64_t x) |
| { |
| return x; |
| } |
| |
| void wrmsr_smp(uint32_t index, uint64_t val) |
| { |
| static struct { uint32_t ecx, eax, edx; } *p = (void *)SMP_MSR_ADDR; |
| |
| wrmsr(index, val); |
| p->ecx = index; |
| p->eax = val; |
| p->edx = val >> 32; |
| ++p; |
| p->ecx = 0; |
| } |
| |
| #ifdef BX_QEMU |
| #define QEMU_CFG_CTL_PORT 0x510 |
| #define QEMU_CFG_DATA_PORT 0x511 |
| #define QEMU_CFG_SIGNATURE 0x00 |
| #define QEMU_CFG_ID 0x01 |
| #define QEMU_CFG_UUID 0x02 |
| #define QEMU_CFG_NUMA 0x0D |
| #define QEMU_CFG_ARCH_LOCAL 0x8000 |
| #define QEMU_CFG_ACPI_TABLES (QEMU_CFG_ARCH_LOCAL + 0) |
| #define QEMU_CFG_SMBIOS_ENTRIES (QEMU_CFG_ARCH_LOCAL + 1) |
| |
| int qemu_cfg_port; |
| |
| void qemu_cfg_select(int f) |
| { |
| outw(QEMU_CFG_CTL_PORT, f); |
| } |
| |
| int qemu_cfg_port_probe() |
| { |
| char *sig = "QEMU"; |
| int i; |
| |
| qemu_cfg_select(QEMU_CFG_SIGNATURE); |
| |
| for (i = 0; i < 4; i++) |
| if (inb(QEMU_CFG_DATA_PORT) != sig[i]) |
| return 0; |
| |
| return 1; |
| } |
| |
| void qemu_cfg_read(uint8_t *buf, int len) |
| { |
| while (len--) |
| *(buf++) = inb(QEMU_CFG_DATA_PORT); |
| } |
| |
| static uint16_t acpi_additional_tables(void) |
| { |
| uint16_t cnt; |
| |
| qemu_cfg_select(QEMU_CFG_ACPI_TABLES); |
| qemu_cfg_read((uint8_t*)&cnt, sizeof(cnt)); |
| |
| return cnt; |
| } |
| |
| static int acpi_load_table(int i, uint32_t addr, uint16_t *len) |
| { |
| qemu_cfg_read((uint8_t*)len, sizeof(*len)); |
| |
| if (!*len) |
| return -1; |
| |
| qemu_cfg_read((uint8_t*)addr, *len); |
| return 0; |
| } |
| |
| static uint16_t smbios_entries(void) |
| { |
| uint16_t cnt; |
| |
| qemu_cfg_select(QEMU_CFG_SMBIOS_ENTRIES); |
| qemu_cfg_read((uint8_t*)&cnt, sizeof(cnt)); |
| |
| return cnt; |
| } |
| |
| uint64_t qemu_cfg_get64 (void) |
| { |
| uint64_t ret; |
| |
| qemu_cfg_read((uint8_t*)&ret, 8); |
| return le64_to_cpu(ret); |
| } |
| #endif |
| |
| void cpu_probe(void) |
| { |
| uint32_t eax, ebx, ecx, edx; |
| cpuid(1, eax, ebx, ecx, edx); |
| cpuid_signature = eax; |
| cpuid_features = edx; |
| cpuid_ext_features = ecx; |
| } |
| |
| static int cmos_readb(int addr) |
| { |
| outb(0x70, addr); |
| return inb(0x71); |
| } |
| |
| void setup_mtrr(void) |
| { |
| int i, vcnt, fix, wc; |
| uint32_t mtrr_cap; |
| union { |
| uint8_t valb[8]; |
| uint64_t val; |
| } u; |
| |
| *(uint32_t *)SMP_MSR_ADDR = 0; |
| |
| if (!(cpuid_features & CPUID_MTRR)) |
| return; |
| |
| if (!(cpuid_features & CPUID_MSR)) |
| return; |
| |
| mtrr_cap = rdmsr(MSR_MTRRcap); |
| vcnt = mtrr_cap & 0xff; |
| fix = mtrr_cap & 0x100; |
| wc = mtrr_cap & 0x400; |
| if (!vcnt || !fix) |
| return; |
| |
| u.val = 0; |
| for (i = 0; i < 8; ++i) |
| if (ram_size >= 65536 * (i + 1)) |
| u.valb[i] = 6; |
| wrmsr_smp(MSR_MTRRfix64K_00000, u.val); |
| u.val = 0; |
| for (i = 0; i < 8; ++i) |
| if (ram_size >= 65536 * 8 + 16384 * (i + 1)) |
| u.valb[i] = 6; |
| wrmsr_smp(MSR_MTRRfix16K_80000, u.val); |
| wrmsr_smp(MSR_MTRRfix16K_A0000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_C0000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_C8000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_D0000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_D8000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_E0000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_E8000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_F0000, 0); |
| wrmsr_smp(MSR_MTRRfix4K_F8000, 0); |
| /* Mark 3.5-4GB as UC, anything not specified defaults to WB */ |
| wrmsr_smp(MTRRphysBase_MSR(0), 0xe0000000ull | 0); |
| wrmsr_smp(MTRRphysMask_MSR(0), ~(0x20000000ull - 1) | 0x800); |
| wrmsr_smp(MSR_MTRRdefType, 0xc06); |
| } |
| |
| void ram_probe(void) |
| { |
| if (cmos_readb(0x34) | cmos_readb(0x35)) |
| ram_size = (cmos_readb(0x34) | (cmos_readb(0x35) << 8)) * 65536 + |
| 16 * 1024 * 1024; |
| else |
| ram_size = (cmos_readb(0x30) | (cmos_readb(0x31) << 8)) * 1024 + |
| 1 * 1024 * 1024; |
| BX_INFO("ram_size=0x%08lx\n", ram_size); |
| if (cmos_readb(0x5b) | cmos_readb(0x5c) | cmos_readb(0x5d)) |
| ram_end = (((uint64_t)cmos_readb(0x5b) << 16) | |
| ((uint64_t)cmos_readb(0x5c) << 24) | |
| ((uint64_t)cmos_readb(0x5d) << 32)) + (1ull << 32); |
| else |
| ram_end = ram_size; |
| BX_INFO("end of ram=%ldMB\n", ram_end >> 20); |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr = ((*(uint16_t *)(0x40e)) << 4) + 0x380; |
| BX_INFO("ebda_cur_addr: 0x%08lx\n", ebda_cur_addr); |
| #endif |
| } |
| |
| /****************************************************/ |
| /* SMP probe */ |
| |
| extern uint8_t smp_ap_boot_code_start; |
| extern uint8_t smp_ap_boot_code_end; |
| |
| /* find the number of CPUs by launching a SIPI to them */ |
| void smp_probe(void) |
| { |
| uint32_t val, sipi_vector; |
| |
| writew(&smp_cpus, 1); |
| if (cpuid_features & CPUID_APIC) { |
| |
| /* enable local APIC */ |
| val = readl(APIC_BASE + APIC_SVR); |
| val |= APIC_ENABLED; |
| writel(APIC_BASE + APIC_SVR, val); |
| |
| /* copy AP boot code */ |
| memcpy((void *)AP_BOOT_ADDR, &smp_ap_boot_code_start, |
| &smp_ap_boot_code_end - &smp_ap_boot_code_start); |
| |
| /* broadcast SIPI */ |
| writel(APIC_BASE + APIC_ICR_LOW, 0x000C4500); |
| sipi_vector = AP_BOOT_ADDR >> 12; |
| writel(APIC_BASE + APIC_ICR_LOW, 0x000C4600 | sipi_vector); |
| |
| #ifndef BX_QEMU |
| delay_ms(10); |
| #else |
| while (cmos_readb(0x5f) + 1 != readw(&smp_cpus)) |
| ; |
| #endif |
| } |
| BX_INFO("Found %d cpu(s)\n", readw(&smp_cpus)); |
| } |
| |
| /****************************************************/ |
| /* PCI init */ |
| |
| #define PCI_ADDRESS_SPACE_MEM 0x00 |
| #define PCI_ADDRESS_SPACE_IO 0x01 |
| #define PCI_ADDRESS_SPACE_MEM_PREFETCH 0x08 |
| |
| #define PCI_ROM_SLOT 6 |
| #define PCI_NUM_REGIONS 7 |
| |
| #define PCI_DEVICES_MAX 64 |
| |
| #define PCI_VENDOR_ID 0x00 /* 16 bits */ |
| #define PCI_DEVICE_ID 0x02 /* 16 bits */ |
| #define PCI_COMMAND 0x04 /* 16 bits */ |
| #define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ |
| #define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ |
| #define PCI_CLASS_DEVICE 0x0a /* Device class */ |
| #define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ |
| #define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ |
| #define PCI_MIN_GNT 0x3e /* 8 bits */ |
| #define PCI_MAX_LAT 0x3f /* 8 bits */ |
| |
| #define PCI_VENDOR_ID_INTEL 0x8086 |
| #define PCI_DEVICE_ID_INTEL_82441 0x1237 |
| #define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 |
| #define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 |
| #define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110 |
| #define PCI_DEVICE_ID_INTEL_82371AB 0x7111 |
| #define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113 |
| |
| #define PCI_VENDOR_ID_IBM 0x1014 |
| #define PCI_VENDOR_ID_APPLE 0x106b |
| |
| typedef struct PCIDevice { |
| int bus; |
| int devfn; |
| } PCIDevice; |
| |
| static uint32_t pci_bios_io_addr; |
| static uint32_t pci_bios_mem_addr; |
| static uint32_t pci_bios_bigmem_addr; |
| /* host irqs corresponding to PCI irqs A-D */ |
| static uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; |
| static PCIDevice i440_pcidev; |
| |
| static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| outl(0xcfc, val); |
| } |
| |
| static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| outw(0xcfc + (addr & 2), val); |
| } |
| |
| static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| outb(0xcfc + (addr & 3), val); |
| } |
| |
| static uint32_t pci_config_readl(PCIDevice *d, uint32_t addr) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| return inl(0xcfc); |
| } |
| |
| static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| return inw(0xcfc + (addr & 2)); |
| } |
| |
| static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr) |
| { |
| outl(0xcf8, 0x80000000 | (d->bus << 16) | (d->devfn << 8) | (addr & 0xfc)); |
| return inb(0xcfc + (addr & 3)); |
| } |
| |
| static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr) |
| { |
| uint16_t cmd; |
| uint32_t ofs, old_addr; |
| |
| if ( region_num == PCI_ROM_SLOT ) { |
| ofs = 0x30; |
| }else{ |
| ofs = 0x10 + region_num * 4; |
| } |
| |
| old_addr = pci_config_readl(d, ofs); |
| |
| pci_config_writel(d, ofs, addr); |
| BX_INFO("region %d: 0x%08x\n", region_num, addr); |
| |
| /* enable memory mappings */ |
| cmd = pci_config_readw(d, PCI_COMMAND); |
| if ( region_num == PCI_ROM_SLOT ) |
| cmd |= 2; |
| else if (old_addr & PCI_ADDRESS_SPACE_IO) |
| cmd |= 1; |
| else |
| cmd |= 2; |
| pci_config_writew(d, PCI_COMMAND, cmd); |
| } |
| |
| /* return the global irq number corresponding to a given device irq |
| pin. We could also use the bus number to have a more precise |
| mapping. */ |
| static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num) |
| { |
| int slot_addend; |
| slot_addend = (pci_dev->devfn >> 3) - 1; |
| return (irq_num + slot_addend) & 3; |
| } |
| |
| static void find_bios_table_area(void) |
| { |
| unsigned long addr; |
| for(addr = 0xf0000; addr < 0x100000; addr += 16) { |
| if (*(uint32_t *)addr == 0xaafb4442) { |
| bios_table_cur_addr = addr + 8; |
| bios_table_end_addr = bios_table_cur_addr + *(uint32_t *)(addr + 4); |
| BX_INFO("bios_table_addr: 0x%08lx end=0x%08lx\n", |
| bios_table_cur_addr, bios_table_end_addr); |
| return; |
| } |
| } |
| return; |
| } |
| |
| static void bios_shadow_init(PCIDevice *d) |
| { |
| int v; |
| |
| if (bios_table_cur_addr == 0) |
| return; |
| |
| /* remap the BIOS to shadow RAM an keep it read/write while we |
| are writing tables */ |
| v = pci_config_readb(d, 0x59); |
| v &= 0xcf; |
| pci_config_writeb(d, 0x59, v); |
| memcpy((void *)BIOS_TMP_STORAGE, (void *)0x000f0000, 0x10000); |
| v |= 0x30; |
| pci_config_writeb(d, 0x59, v); |
| memcpy((void *)0x000f0000, (void *)BIOS_TMP_STORAGE, 0x10000); |
| |
| i440_pcidev = *d; |
| } |
| |
| static void bios_lock_shadow_ram(void) |
| { |
| PCIDevice *d = &i440_pcidev; |
| int v; |
| |
| wbinvd(); |
| v = pci_config_readb(d, 0x59); |
| v = (v & 0x0f) | (0x10); |
| pci_config_writeb(d, 0x59, v); |
| } |
| |
| static void pci_bios_init_bridges(PCIDevice *d) |
| { |
| uint16_t vendor_id, device_id; |
| |
| vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
| device_id = pci_config_readw(d, PCI_DEVICE_ID); |
| |
| if (vendor_id == PCI_VENDOR_ID_INTEL && |
| (device_id == PCI_DEVICE_ID_INTEL_82371SB_0 || |
| device_id == PCI_DEVICE_ID_INTEL_82371AB_0)) { |
| int i, irq; |
| uint8_t elcr[2]; |
| |
| /* PIIX3/PIIX4 PCI to ISA bridge */ |
| |
| elcr[0] = 0x00; |
| elcr[1] = 0x00; |
| for(i = 0; i < 4; i++) { |
| irq = pci_irqs[i]; |
| /* set to trigger level */ |
| elcr[irq >> 3] |= (1 << (irq & 7)); |
| /* activate irq remapping in PIIX */ |
| pci_config_writeb(d, 0x60 + i, irq); |
| } |
| outb(0x4d0, elcr[0]); |
| outb(0x4d1, elcr[1]); |
| BX_INFO("PIIX3/PIIX4 init: elcr=%02x %02x\n", |
| elcr[0], elcr[1]); |
| } else if (vendor_id == PCI_VENDOR_ID_INTEL && device_id == PCI_DEVICE_ID_INTEL_82441) { |
| /* i440 PCI bridge */ |
| bios_shadow_init(d); |
| } |
| } |
| |
| extern uint8_t smm_relocation_start, smm_relocation_end; |
| extern uint8_t smm_code_start, smm_code_end; |
| |
| #ifdef BX_USE_SMM |
| static void smm_init(PCIDevice *d) |
| { |
| uint32_t value; |
| |
| /* check if SMM init is already done */ |
| value = pci_config_readl(d, 0x58); |
| if ((value & (1 << 25)) == 0) { |
| |
| /* enable the SMM memory window */ |
| pci_config_writeb(&i440_pcidev, 0x72, 0x02 | 0x48); |
| |
| /* save original memory content */ |
| memcpy((void *)0xa8000, (void *)0x38000, 0x8000); |
| |
| /* copy the SMM relocation code */ |
| memcpy((void *)0x38000, &smm_relocation_start, |
| &smm_relocation_end - &smm_relocation_start); |
| |
| /* enable SMI generation when writing to the APMC register */ |
| pci_config_writel(d, 0x58, value | (1 << 25)); |
| |
| /* init APM status port */ |
| outb(0xb3, 0x01); |
| |
| /* raise an SMI interrupt */ |
| outb(0xb2, 0x00); |
| |
| /* wait until SMM code executed */ |
| while (inb(0xb3) != 0x00); |
| |
| /* restore original memory content */ |
| memcpy((void *)0x38000, (void *)0xa8000, 0x8000); |
| |
| /* copy the SMM code */ |
| memcpy((void *)0xa8000, &smm_code_start, |
| &smm_code_end - &smm_code_start); |
| wbinvd(); |
| |
| /* close the SMM memory window and enable normal SMM */ |
| pci_config_writeb(&i440_pcidev, 0x72, 0x02 | 0x08); |
| } |
| } |
| #endif |
| |
| static void piix4_pm_enable(PCIDevice *d) |
| { |
| /* PIIX4 Power Management device (for ACPI) */ |
| pci_config_writel(d, 0x40, PM_IO_BASE | 1); |
| pci_config_writeb(d, 0x80, 0x01); /* enable PM io space */ |
| pci_config_writel(d, 0x90, SMB_IO_BASE | 1); |
| pci_config_writeb(d, 0xd2, 0x09); /* enable SMBus io space */ |
| #ifdef BX_USE_SMM |
| smm_init(d); |
| #endif |
| } |
| |
| static void pci_bios_init_device(PCIDevice *d) |
| { |
| int class; |
| uint32_t *paddr; |
| int i, pin, pic_irq, vendor_id, device_id; |
| |
| class = pci_config_readw(d, PCI_CLASS_DEVICE); |
| vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
| device_id = pci_config_readw(d, PCI_DEVICE_ID); |
| BX_INFO("PCI: bus=%d devfn=0x%02x: vendor_id=0x%04x device_id=0x%04x class=0x%04x\n", |
| d->bus, d->devfn, vendor_id, device_id, class); |
| switch(class) { |
| case 0x0101: /* Mass storage controller - IDE interface */ |
| if (vendor_id == PCI_VENDOR_ID_INTEL && |
| (device_id == PCI_DEVICE_ID_INTEL_82371SB_1 || |
| device_id == PCI_DEVICE_ID_INTEL_82371AB)) { |
| /* PIIX3/PIIX4 IDE */ |
| pci_config_writew(d, 0x40, 0x8000); // enable IDE0 |
| pci_config_writew(d, 0x42, 0x8000); // enable IDE1 |
| goto default_map; |
| } else { |
| /* IDE: we map it as in ISA mode */ |
| pci_set_io_region_addr(d, 0, 0x1f0); |
| pci_set_io_region_addr(d, 1, 0x3f4); |
| pci_set_io_region_addr(d, 2, 0x170); |
| pci_set_io_region_addr(d, 3, 0x374); |
| } |
| break; |
| case 0x0300: /* Display controller - VGA compatible controller */ |
| if (vendor_id != 0x1234) |
| goto default_map; |
| /* VGA: map frame buffer to default Bochs VBE address */ |
| pci_set_io_region_addr(d, 0, 0xE0000000); |
| break; |
| case 0x0800: /* Generic system peripheral - PIC */ |
| if (vendor_id == PCI_VENDOR_ID_IBM) { |
| /* IBM */ |
| if (device_id == 0x0046 || device_id == 0xFFFF) { |
| /* MPIC & MPIC2 */ |
| pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000); |
| } |
| } |
| break; |
| case 0xff00: |
| if (vendor_id == PCI_VENDOR_ID_APPLE && |
| (device_id == 0x0017 || device_id == 0x0022)) { |
| /* macio bridge */ |
| pci_set_io_region_addr(d, 0, 0x80800000); |
| } |
| break; |
| default: |
| default_map: |
| /* default memory mappings */ |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| int ofs; |
| uint32_t val, size ; |
| |
| if (i == PCI_ROM_SLOT) { |
| ofs = 0x30; |
| pci_config_writel(d, ofs, 0xfffffffe); |
| } else { |
| ofs = 0x10 + i * 4; |
| pci_config_writel(d, ofs, 0xffffffff); |
| } |
| val = pci_config_readl(d, ofs); |
| if (val != 0) { |
| size = (~(val & ~0xf)) + 1; |
| if (val & PCI_ADDRESS_SPACE_IO) |
| paddr = &pci_bios_io_addr; |
| else if (size >= 0x04000000) |
| paddr = &pci_bios_bigmem_addr; |
| else |
| paddr = &pci_bios_mem_addr; |
| *paddr = (*paddr + size - 1) & ~(size - 1); |
| pci_set_io_region_addr(d, i, *paddr); |
| *paddr += size; |
| } |
| } |
| break; |
| } |
| |
| /* map the interrupt */ |
| pin = pci_config_readb(d, PCI_INTERRUPT_PIN); |
| if (pin != 0) { |
| pin = pci_slot_get_pirq(d, pin - 1); |
| pic_irq = pci_irqs[pin]; |
| pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq); |
| } |
| |
| if (vendor_id == PCI_VENDOR_ID_INTEL && device_id == PCI_DEVICE_ID_INTEL_82371AB_3) { |
| /* PIIX4 Power Management device (for ACPI) */ |
| pm_io_base = PM_IO_BASE; |
| smb_io_base = SMB_IO_BASE; |
| // acpi sci is hardwired to 9 |
| pci_config_writeb(d, PCI_INTERRUPT_LINE, 9); |
| pm_sci_int = pci_config_readb(d, PCI_INTERRUPT_LINE); |
| piix4_pm_enable(d); |
| acpi_enabled = 1; |
| } |
| } |
| |
| void pci_for_each_device(void (*init_func)(PCIDevice *d)) |
| { |
| PCIDevice d1, *d = &d1; |
| int bus, devfn; |
| uint16_t vendor_id, device_id; |
| |
| for(bus = 0; bus < 1; bus++) { |
| for(devfn = 0; devfn < 256; devfn++) { |
| d->bus = bus; |
| d->devfn = devfn; |
| vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
| device_id = pci_config_readw(d, PCI_DEVICE_ID); |
| if (vendor_id != 0xffff || device_id != 0xffff) { |
| init_func(d); |
| } |
| } |
| } |
| } |
| |
| void pci_bios_init(void) |
| { |
| pci_bios_io_addr = 0xc000; |
| pci_bios_mem_addr = 0xf0000000; |
| pci_bios_bigmem_addr = ram_size; |
| if (pci_bios_bigmem_addr < 0x90000000) |
| pci_bios_bigmem_addr = 0x90000000; |
| |
| pci_for_each_device(pci_bios_init_bridges); |
| |
| pci_for_each_device(pci_bios_init_device); |
| } |
| |
| /****************************************************/ |
| /* Multi Processor table init */ |
| |
| static void putb(uint8_t **pp, int val) |
| { |
| uint8_t *q; |
| q = *pp; |
| *q++ = val; |
| *pp = q; |
| } |
| |
| static void putstr(uint8_t **pp, const char *str) |
| { |
| uint8_t *q; |
| q = *pp; |
| while (*str) |
| *q++ = *str++; |
| *pp = q; |
| } |
| |
| static void putle16(uint8_t **pp, int val) |
| { |
| uint8_t *q; |
| q = *pp; |
| *q++ = val; |
| *q++ = val >> 8; |
| *pp = q; |
| } |
| |
| static void putle32(uint8_t **pp, int val) |
| { |
| uint8_t *q; |
| q = *pp; |
| *q++ = val; |
| *q++ = val >> 8; |
| *q++ = val >> 16; |
| *q++ = val >> 24; |
| *pp = q; |
| } |
| |
| static int mpf_checksum(const uint8_t *data, int len) |
| { |
| int sum, i; |
| sum = 0; |
| for(i = 0; i < len; i++) |
| sum += data[i]; |
| return sum & 0xff; |
| } |
| |
| static unsigned long align(unsigned long addr, unsigned long v) |
| { |
| return (addr + v - 1) & ~(v - 1); |
| } |
| |
| static void mptable_init(void) |
| { |
| uint8_t *mp_config_table, *q, *float_pointer_struct; |
| int ioapic_id, i, len; |
| int mp_config_table_size; |
| |
| #ifdef BX_USE_EBDA_TABLES |
| mp_config_table = (uint8_t *)(ram_size - ACPI_DATA_SIZE - MPTABLE_MAX_SIZE); |
| #else |
| bios_table_cur_addr = align(bios_table_cur_addr, 16); |
| mp_config_table = (uint8_t *)bios_table_cur_addr; |
| #endif |
| q = mp_config_table; |
| putstr(&q, "PCMP"); /* "PCMP signature */ |
| putle16(&q, 0); /* table length (patched later) */ |
| putb(&q, 4); /* spec rev */ |
| putb(&q, 0); /* checksum (patched later) */ |
| #ifdef BX_QEMU |
| putstr(&q, "QEMUCPU "); /* OEM id */ |
| #else |
| putstr(&q, "BOCHSCPU"); |
| #endif |
| putstr(&q, "0.1 "); /* vendor id */ |
| putle32(&q, 0); /* OEM table ptr */ |
| putle16(&q, 0); /* OEM table size */ |
| putle16(&q, smp_cpus + 18); /* entry count */ |
| putle32(&q, 0xfee00000); /* local APIC addr */ |
| putle16(&q, 0); /* ext table length */ |
| putb(&q, 0); /* ext table checksum */ |
| putb(&q, 0); /* reserved */ |
| |
| for(i = 0; i < smp_cpus; i++) { |
| putb(&q, 0); /* entry type = processor */ |
| putb(&q, i); /* APIC id */ |
| putb(&q, 0x11); /* local APIC version number */ |
| if (i == 0) |
| putb(&q, 3); /* cpu flags: enabled, bootstrap cpu */ |
| else |
| putb(&q, 1); /* cpu flags: enabled */ |
| putb(&q, 0); /* cpu signature */ |
| putb(&q, 6); |
| putb(&q, 0); |
| putb(&q, 0); |
| putle16(&q, 0x201); /* feature flags */ |
| putle16(&q, 0); |
| |
| putle16(&q, 0); /* reserved */ |
| putle16(&q, 0); |
| putle16(&q, 0); |
| putle16(&q, 0); |
| } |
| |
| /* isa bus */ |
| putb(&q, 1); /* entry type = bus */ |
| putb(&q, 0); /* bus ID */ |
| putstr(&q, "ISA "); |
| |
| /* ioapic */ |
| ioapic_id = smp_cpus; |
| putb(&q, 2); /* entry type = I/O APIC */ |
| putb(&q, ioapic_id); /* apic ID */ |
| putb(&q, 0x11); /* I/O APIC version number */ |
| putb(&q, 1); /* enable */ |
| putle32(&q, 0xfec00000); /* I/O APIC addr */ |
| |
| /* irqs */ |
| for(i = 0; i < 16; i++) { |
| #ifdef BX_QEMU |
| /* One entry per ioapic input. Input 2 is covered by |
| irq0->inti2 override (i == 0). irq 2 is unused */ |
| if (i == 2) |
| continue; |
| #endif |
| putb(&q, 3); /* entry type = I/O interrupt */ |
| putb(&q, 0); /* interrupt type = vectored interrupt */ |
| putb(&q, 0); /* flags: po=0, el=0 */ |
| putb(&q, 0); |
| putb(&q, 0); /* source bus ID = ISA */ |
| putb(&q, i); /* source bus IRQ */ |
| putb(&q, ioapic_id); /* dest I/O APIC ID */ |
| #ifdef BX_QEMU |
| putb(&q, i == 0 ? 2 : i); /* dest I/O APIC interrupt in */ |
| #else |
| putb(&q, i); /* dest I/O APIC interrupt in */ |
| #endif |
| } |
| /* patch length */ |
| len = q - mp_config_table; |
| mp_config_table[4] = len; |
| mp_config_table[5] = len >> 8; |
| |
| mp_config_table[7] = -mpf_checksum(mp_config_table, q - mp_config_table); |
| |
| mp_config_table_size = q - mp_config_table; |
| |
| #ifndef BX_USE_EBDA_TABLES |
| bios_table_cur_addr += mp_config_table_size; |
| #endif |
| |
| /* floating pointer structure */ |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr = align(ebda_cur_addr, 16); |
| float_pointer_struct = (uint8_t *)ebda_cur_addr; |
| #else |
| bios_table_cur_addr = align(bios_table_cur_addr, 16); |
| float_pointer_struct = (uint8_t *)bios_table_cur_addr; |
| #endif |
| q = float_pointer_struct; |
| putstr(&q, "_MP_"); |
| /* pointer to MP config table */ |
| putle32(&q, (unsigned long)mp_config_table); |
| |
| putb(&q, 1); /* length in 16 byte units */ |
| putb(&q, 4); /* MP spec revision */ |
| putb(&q, 0); /* checksum (patched later) */ |
| putb(&q, 0); /* MP feature byte 1 */ |
| |
| putb(&q, 0); |
| putb(&q, 0); |
| putb(&q, 0); |
| putb(&q, 0); |
| float_pointer_struct[10] = |
| -mpf_checksum(float_pointer_struct, q - float_pointer_struct); |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr += (q - float_pointer_struct); |
| #else |
| bios_table_cur_addr += (q - float_pointer_struct); |
| #endif |
| BX_INFO("MP table addr=0x%08lx MPC table addr=0x%08lx size=0x%x\n", |
| (unsigned long)float_pointer_struct, |
| (unsigned long)mp_config_table, |
| mp_config_table_size); |
| } |
| |
| /****************************************************/ |
| /* ACPI tables init */ |
| |
| /* Table structure from Linux kernel (the ACPI tables are under the |
| BSD license) */ |
| |
| /* |
| * All tables must be byte-packed to match the ACPI specification, since |
| * the tables are provided by the system BIOS. |
| */ |
| |
| #define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \ |
| uint8_t signature [4]; /* ACPI signature (4 ASCII characters) */\ |
| uint32_t length; /* Length of table, in bytes, including header */\ |
| uint8_t revision; /* ACPI Specification minor version # */\ |
| uint8_t checksum; /* To make sum of entire table == 0 */\ |
| uint8_t oem_id [6]; /* OEM identification */\ |
| uint8_t oem_table_id [8]; /* OEM table identification */\ |
| uint32_t oem_revision; /* OEM revision number */\ |
| uint8_t asl_compiler_id [4]; /* ASL compiler vendor ID */\ |
| uint32_t asl_compiler_revision; /* ASL compiler revision number */ |
| |
| |
| struct acpi_table_header /* ACPI common table header */ |
| { |
| ACPI_TABLE_HEADER_DEF |
| } __attribute__((__packed__)); |
| |
| struct rsdp_descriptor /* Root System Descriptor Pointer */ |
| { |
| uint8_t signature [8]; /* ACPI signature, contains "RSD PTR " */ |
| uint8_t checksum; /* To make sum of struct == 0 */ |
| uint8_t oem_id [6]; /* OEM identification */ |
| uint8_t revision; /* Must be 0 for 1.0, 2 for 2.0 */ |
| uint32_t rsdt_physical_address; /* 32-bit physical address of RSDT */ |
| uint32_t length; /* XSDT Length in bytes including hdr */ |
| uint64_t xsdt_physical_address; /* 64-bit physical address of XSDT */ |
| uint8_t extended_checksum; /* Checksum of entire table */ |
| uint8_t reserved [3]; /* Reserved field must be 0 */ |
| } __attribute__((__packed__)); |
| |
| /* |
| * ACPI 1.0 Root System Description Table (RSDT) |
| */ |
| struct rsdt_descriptor_rev1 |
| { |
| ACPI_TABLE_HEADER_DEF /* ACPI common table header */ |
| #ifdef BX_QEMU |
| uint32_t table_offset_entry [5]; /* Array of pointers to other */ |
| #else |
| uint32_t table_offset_entry [3]; /* Array of pointers to other */ |
| #endif |
| /* ACPI tables */ |
| } __attribute__((__packed__)); |
| |
| /* |
| * ACPI 1.0 Firmware ACPI Control Structure (FACS) |
| */ |
| struct facs_descriptor_rev1 |
| { |
| uint8_t signature[4]; /* ACPI Signature */ |
| uint32_t length; /* Length of structure, in bytes */ |
| uint32_t hardware_signature; /* Hardware configuration signature */ |
| uint32_t firmware_waking_vector; /* ACPI OS waking vector */ |
| uint32_t global_lock; /* Global Lock */ |
| uint32_t S4bios_f : 1; /* Indicates if S4BIOS support is present */ |
| uint32_t reserved1 : 31; /* Must be 0 */ |
| uint8_t resverved3 [40]; /* Reserved - must be zero */ |
| } __attribute__((__packed__)); |
| |
| |
| /* |
| * ACPI 1.0 Fixed ACPI Description Table (FADT) |
| */ |
| struct fadt_descriptor_rev1 |
| { |
| ACPI_TABLE_HEADER_DEF /* ACPI common table header */ |
| uint32_t firmware_ctrl; /* Physical address of FACS */ |
| uint32_t dsdt; /* Physical address of DSDT */ |
| uint8_t model; /* System Interrupt Model */ |
| uint8_t reserved1; /* Reserved */ |
| uint16_t sci_int; /* System vector of SCI interrupt */ |
| uint32_t smi_cmd; /* Port address of SMI command port */ |
| uint8_t acpi_enable; /* Value to write to smi_cmd to enable ACPI */ |
| uint8_t acpi_disable; /* Value to write to smi_cmd to disable ACPI */ |
| uint8_t S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ |
| uint8_t reserved2; /* Reserved - must be zero */ |
| uint32_t pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */ |
| uint32_t pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */ |
| uint32_t pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ |
| uint32_t pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ |
| uint32_t pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ |
| uint32_t pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ |
| uint32_t gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ |
| uint32_t gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ |
| uint8_t pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ |
| uint8_t pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ |
| uint8_t pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ |
| uint8_t pm_tmr_len; /* Byte Length of ports at pm_tm_blk */ |
| uint8_t gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ |
| uint8_t gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ |
| uint8_t gpe1_base; /* Offset in gpe model where gpe1 events start */ |
| uint8_t reserved3; /* Reserved */ |
| uint16_t plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ |
| uint16_t plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ |
| uint16_t flush_size; /* Size of area read to flush caches */ |
| uint16_t flush_stride; /* Stride used in flushing caches */ |
| uint8_t duty_offset; /* Bit location of duty cycle field in p_cnt reg */ |
| uint8_t duty_width; /* Bit width of duty cycle field in p_cnt reg */ |
| uint8_t day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ |
| uint8_t mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ |
| uint8_t century; /* Index to century in RTC CMOS RAM */ |
| uint8_t reserved4; /* Reserved */ |
| uint8_t reserved4a; /* Reserved */ |
| uint8_t reserved4b; /* Reserved */ |
| #if 0 |
| uint32_t wb_invd : 1; /* The wbinvd instruction works properly */ |
| uint32_t wb_invd_flush : 1; /* The wbinvd flushes but does not invalidate */ |
| uint32_t proc_c1 : 1; /* All processors support C1 state */ |
| uint32_t plvl2_up : 1; /* C2 state works on MP system */ |
| uint32_t pwr_button : 1; /* Power button is handled as a generic feature */ |
| uint32_t sleep_button : 1; /* Sleep button is handled as a generic feature, or not present */ |
| uint32_t fixed_rTC : 1; /* RTC wakeup stat not in fixed register space */ |
| uint32_t rtcs4 : 1; /* RTC wakeup stat not possible from S4 */ |
| uint32_t tmr_val_ext : 1; /* The tmr_val width is 32 bits (0 = 24 bits) */ |
| uint32_t reserved5 : 23; /* Reserved - must be zero */ |
| #else |
| uint32_t flags; |
| #endif |
| } __attribute__((__packed__)); |
| |
| /* |
| * MADT values and structures |
| */ |
| |
| /* Values for MADT PCATCompat */ |
| |
| #define DUAL_PIC 0 |
| #define MULTIPLE_APIC 1 |
| |
| |
| /* Master MADT */ |
| |
| struct multiple_apic_table |
| { |
| ACPI_TABLE_HEADER_DEF /* ACPI common table header */ |
| uint32_t local_apic_address; /* Physical address of local APIC */ |
| #if 0 |
| uint32_t PCATcompat : 1; /* A one indicates system also has dual 8259s */ |
| uint32_t reserved1 : 31; |
| #else |
| uint32_t flags; |
| #endif |
| } __attribute__((__packed__)); |
| |
| |
| /* Values for Type in APIC sub-headers */ |
| |
| #define APIC_PROCESSOR 0 |
| #define APIC_IO 1 |
| #define APIC_XRUPT_OVERRIDE 2 |
| #define APIC_NMI 3 |
| #define APIC_LOCAL_NMI 4 |
| #define APIC_ADDRESS_OVERRIDE 5 |
| #define APIC_IO_SAPIC 6 |
| #define APIC_LOCAL_SAPIC 7 |
| #define APIC_XRUPT_SOURCE 8 |
| #define APIC_RESERVED 9 /* 9 and greater are reserved */ |
| |
| #define ACPI_SUB_HEADER_DEF /* Common ACPI sub-structure header */\ |
| uint8_t type; \ |
| uint8_t length; |
| |
| /* |
| * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE) |
| */ |
| /* Sub-structures for MADT */ |
| |
| struct madt_processor_apic |
| { |
| ACPI_SUB_HEADER_DEF |
| uint8_t processor_id; /* ACPI processor id */ |
| uint8_t local_apic_id; /* Processor's local APIC id */ |
| #if 0 |
| uint32_t processor_enabled: 1; /* Processor is usable if set */ |
| uint32_t reserved2 : 31; /* Reserved, must be zero */ |
| #else |
| uint32_t flags; |
| #endif |
| } __attribute__((__packed__)); |
| |
| /* |
| * SRAT (NUMA topology description) table |
| */ |
| |
| #define SRAT_PROCESSOR 0 |
| #define SRAT_MEMORY 1 |
| |
| struct system_resource_affinity_table |
| { |
| ACPI_TABLE_HEADER_DEF |
| uint32_t reserved1; |
| uint32_t reserved2[2]; |
| }; |
| |
| struct srat_processor_affinity |
| { |
| ACPI_SUB_HEADER_DEF |
| uint8_t proximity_lo; |
| uint8_t local_apic_id; |
| uint32_t flags; |
| uint8_t local_sapic_eid; |
| uint8_t proximity_hi[3]; |
| uint32_t reserved; |
| }; |
| |
| struct srat_memory_affinity |
| { |
| ACPI_SUB_HEADER_DEF |
| uint8_t proximity[4]; |
| uint16_t reserved1; |
| uint32_t base_addr_low,base_addr_high; |
| uint32_t length_low,length_high; |
| uint32_t reserved2; |
| uint32_t flags; |
| uint32_t reserved3[2]; |
| }; |
| |
| #ifdef BX_QEMU |
| /* |
| * * ACPI 2.0 Generic Address Space definition. |
| * */ |
| struct acpi_20_generic_address { |
| uint8_t address_space_id; |
| uint8_t register_bit_width; |
| uint8_t register_bit_offset; |
| uint8_t reserved; |
| uint64_t address; |
| } __attribute__((__packed__)); |
| |
| /* |
| * * HPET Description Table |
| * */ |
| struct acpi_20_hpet { |
| ACPI_TABLE_HEADER_DEF /* ACPI common table header */ |
| uint32_t timer_block_id; |
| struct acpi_20_generic_address addr; |
| uint8_t hpet_number; |
| uint16_t min_tick; |
| uint8_t page_protect; |
| } __attribute__((__packed__)); |
| #define ACPI_HPET_ADDRESS 0xFED00000UL |
| #endif |
| |
| struct madt_io_apic |
| { |
| ACPI_SUB_HEADER_DEF |
| uint8_t io_apic_id; /* I/O APIC ID */ |
| uint8_t reserved; /* Reserved - must be zero */ |
| uint32_t address; /* APIC physical address */ |
| uint32_t interrupt; /* Global system interrupt where INTI |
| * lines start */ |
| } __attribute__((__packed__)); |
| |
| #ifdef BX_QEMU |
| struct madt_int_override |
| { |
| ACPI_SUB_HEADER_DEF |
| uint8_t bus; /* Identifies ISA Bus */ |
| uint8_t source; /* Bus-relative interrupt source */ |
| uint32_t gsi; /* GSI that source will signal */ |
| uint16_t flags; /* MPS INTI flags */ |
| } __attribute__((__packed__)); |
| #endif |
| |
| #include "acpi-dsdt.hex" |
| |
| static inline uint16_t cpu_to_le16(uint16_t x) |
| { |
| return x; |
| } |
| |
| static inline uint32_t cpu_to_le32(uint32_t x) |
| { |
| return x; |
| } |
| |
| static int acpi_checksum(const uint8_t *data, int len) |
| { |
| int sum, i; |
| sum = 0; |
| for(i = 0; i < len; i++) |
| sum += data[i]; |
| return (-sum) & 0xff; |
| } |
| |
| static void acpi_build_table_header(struct acpi_table_header *h, |
| char *sig, int len, uint8_t rev) |
| { |
| memcpy(h->signature, sig, 4); |
| h->length = cpu_to_le32(len); |
| h->revision = rev; |
| #ifdef BX_QEMU |
| memcpy(h->oem_id, "QEMU ", 6); |
| memcpy(h->oem_table_id, "QEMU", 4); |
| #else |
| memcpy(h->oem_id, "BOCHS ", 6); |
| memcpy(h->oem_table_id, "BXPC", 4); |
| #endif |
| memcpy(h->oem_table_id + 4, sig, 4); |
| h->oem_revision = cpu_to_le32(1); |
| #ifdef BX_QEMU |
| memcpy(h->asl_compiler_id, "QEMU", 4); |
| #else |
| memcpy(h->asl_compiler_id, "BXPC", 4); |
| #endif |
| h->asl_compiler_revision = cpu_to_le32(1); |
| h->checksum = acpi_checksum((void *)h, len); |
| } |
| |
| int acpi_build_processor_ssdt(uint8_t *ssdt) |
| { |
| uint8_t *ssdt_ptr = ssdt; |
| int i, length; |
| int acpi_cpus = smp_cpus > 0xff ? 0xff : smp_cpus; |
| |
| ssdt_ptr[9] = 0; // checksum; |
| ssdt_ptr += sizeof(struct acpi_table_header); |
| |
| // caluculate the length of processor block and scope block excluding PkgLength |
| length = 0x0d * acpi_cpus + 4; |
| |
| // build processor scope header |
| *(ssdt_ptr++) = 0x10; // ScopeOp |
| if (length <= 0x3e) { |
| *(ssdt_ptr++) = length + 1; |
| } else { |
| *(ssdt_ptr++) = 0x7F; |
| *(ssdt_ptr++) = (length + 2) >> 6; |
| } |
| *(ssdt_ptr++) = '_'; // Name |
| *(ssdt_ptr++) = 'P'; |
| *(ssdt_ptr++) = 'R'; |
| *(ssdt_ptr++) = '_'; |
| |
| // build object for each processor |
| for(i=0;i<acpi_cpus;i++) { |
| *(ssdt_ptr++) = 0x5B; // ProcessorOp |
| *(ssdt_ptr++) = 0x83; |
| *(ssdt_ptr++) = 0x0B; // Length |
| *(ssdt_ptr++) = 'C'; // Name (CPUxx) |
| *(ssdt_ptr++) = 'P'; |
| if ((i & 0xf0) != 0) |
| *(ssdt_ptr++) = (i >> 4) < 0xa ? (i >> 4) + '0' : (i >> 4) + 'A' - 0xa; |
| else |
| *(ssdt_ptr++) = 'U'; |
| *(ssdt_ptr++) = (i & 0xf) < 0xa ? (i & 0xf) + '0' : (i & 0xf) + 'A' - 0xa; |
| *(ssdt_ptr++) = i; |
| *(ssdt_ptr++) = 0x10; // Processor block address |
| *(ssdt_ptr++) = 0xb0; |
| *(ssdt_ptr++) = 0; |
| *(ssdt_ptr++) = 0; |
| *(ssdt_ptr++) = 6; // Processor block length |
| } |
| |
| acpi_build_table_header((struct acpi_table_header *)ssdt, |
| "SSDT", ssdt_ptr - ssdt, 1); |
| |
| return ssdt_ptr - ssdt; |
| } |
| |
| static void acpi_build_srat_memory(struct srat_memory_affinity *numamem, |
| uint64_t base, uint64_t len, int node, int enabled) |
| { |
| numamem->type = SRAT_MEMORY; |
| numamem->length = sizeof(*numamem); |
| memset (numamem->proximity, 0 ,4); |
| numamem->proximity[0] = node; |
| numamem->flags = cpu_to_le32(!!enabled); |
| numamem->base_addr_low = base & 0xFFFFFFFF; |
| numamem->base_addr_high = base >> 32; |
| numamem->length_low = len & 0xFFFFFFFF; |
| numamem->length_high = len >> 32; |
| return; |
| } |
| |
| /* base_addr must be a multiple of 4KB */ |
| void acpi_bios_init(void) |
| { |
| struct rsdp_descriptor *rsdp; |
| struct rsdt_descriptor_rev1 *rsdt; |
| struct fadt_descriptor_rev1 *fadt; |
| struct facs_descriptor_rev1 *facs; |
| struct multiple_apic_table *madt; |
| uint8_t *dsdt, *ssdt; |
| #ifdef BX_QEMU |
| struct system_resource_affinity_table *srat; |
| struct acpi_20_hpet *hpet; |
| uint32_t hpet_addr; |
| #endif |
| uint32_t base_addr, rsdt_addr, fadt_addr, addr, facs_addr, dsdt_addr, ssdt_addr; |
| uint32_t acpi_tables_size, madt_addr, madt_size, rsdt_size; |
| uint32_t srat_addr,srat_size; |
| uint16_t i, external_tables; |
| int nb_numa_nodes; |
| |
| /* reserve memory space for tables */ |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr = align(ebda_cur_addr, 16); |
| rsdp = (void *)(ebda_cur_addr); |
| ebda_cur_addr += sizeof(*rsdp); |
| #else |
| bios_table_cur_addr = align(bios_table_cur_addr, 16); |
| rsdp = (void *)(bios_table_cur_addr); |
| bios_table_cur_addr += sizeof(*rsdp); |
| #endif |
| |
| #ifdef BX_QEMU |
| external_tables = acpi_additional_tables(); |
| #else |
| external_tables = 0; |
| #endif |
| |
| addr = base_addr = ram_size - ACPI_DATA_SIZE; |
| rsdt_addr = addr; |
| rsdt = (void *)(addr); |
| rsdt_size = sizeof(*rsdt) + external_tables * 4; |
| addr += rsdt_size; |
| |
| fadt_addr = addr; |
| fadt = (void *)(addr); |
| addr += sizeof(*fadt); |
| |
| /* XXX: FACS should be in RAM */ |
| addr = (addr + 63) & ~63; /* 64 byte alignment for FACS */ |
| facs_addr = addr; |
| facs = (void *)(addr); |
| addr += sizeof(*facs); |
| |
| dsdt_addr = addr; |
| dsdt = (void *)(addr); |
| addr += sizeof(AmlCode); |
| |
| ssdt_addr = addr; |
| ssdt = (void *)(addr); |
| addr += acpi_build_processor_ssdt(ssdt); |
| #ifdef BX_QEMU |
| qemu_cfg_select(QEMU_CFG_NUMA); |
| nb_numa_nodes = qemu_cfg_get64(); |
| #else |
| nb_numa_nodes = 0; |
| #endif |
| if (nb_numa_nodes > 0) { |
| addr = (addr + 7) & ~7; |
| srat_addr = addr; |
| srat_size = sizeof(*srat) + |
| sizeof(struct srat_processor_affinity) * smp_cpus + |
| sizeof(struct srat_memory_affinity) * (nb_numa_nodes + 2); |
| srat = (void *)(addr); |
| addr += srat_size; |
| } else { |
| srat_addr = addr; |
| srat = (void*)(addr); |
| srat_size = 0; |
| } |
| |
| addr = (addr + 7) & ~7; |
| madt_addr = addr; |
| madt_size = sizeof(*madt) + |
| sizeof(struct madt_processor_apic) * smp_cpus + |
| #ifdef BX_QEMU |
| sizeof(struct madt_io_apic) + sizeof(struct madt_int_override); |
| #else |
| sizeof(struct madt_io_apic); |
| #endif |
| madt = (void *)(addr); |
| addr += madt_size; |
| |
| #ifdef BX_QEMU |
| addr = (addr + 7) & ~7; |
| hpet_addr = addr; |
| hpet = (void *)(addr); |
| addr += sizeof(*hpet); |
| #endif |
| |
| /* RSDP */ |
| memset(rsdp, 0, sizeof(*rsdp)); |
| memcpy(rsdp->signature, "RSD PTR ", 8); |
| #ifdef BX_QEMU |
| memcpy(rsdp->oem_id, "QEMU ", 6); |
| #else |
| memcpy(rsdp->oem_id, "BOCHS ", 6); |
| #endif |
| rsdp->rsdt_physical_address = cpu_to_le32(rsdt_addr); |
| rsdp->checksum = acpi_checksum((void *)rsdp, 20); |
| |
| /* FADT */ |
| memset(fadt, 0, sizeof(*fadt)); |
| fadt->firmware_ctrl = cpu_to_le32(facs_addr); |
| fadt->dsdt = cpu_to_le32(dsdt_addr); |
| fadt->model = 1; |
| fadt->reserved1 = 0; |
| fadt->sci_int = cpu_to_le16(pm_sci_int); |
| fadt->smi_cmd = cpu_to_le32(SMI_CMD_IO_ADDR); |
| fadt->acpi_enable = 0xf1; |
| fadt->acpi_disable = 0xf0; |
| fadt->pm1a_evt_blk = cpu_to_le32(pm_io_base); |
| fadt->pm1a_cnt_blk = cpu_to_le32(pm_io_base + 0x04); |
| fadt->pm_tmr_blk = cpu_to_le32(pm_io_base + 0x08); |
| fadt->pm1_evt_len = 4; |
| fadt->pm1_cnt_len = 2; |
| fadt->pm_tmr_len = 4; |
| fadt->plvl2_lat = cpu_to_le16(0xfff); // C2 state not supported |
| fadt->plvl3_lat = cpu_to_le16(0xfff); // C3 state not supported |
| fadt->gpe0_blk = cpu_to_le32(0xafe0); |
| fadt->gpe0_blk_len = 4; |
| /* WBINVD + PROC_C1 + SLP_BUTTON + FIX_RTC */ |
| fadt->flags = cpu_to_le32((1 << 0) | (1 << 2) | (1 << 5) | (1 << 6)); |
| acpi_build_table_header((struct acpi_table_header *)fadt, "FACP", |
| sizeof(*fadt), 1); |
| |
| /* FACS */ |
| memset(facs, 0, sizeof(*facs)); |
| memcpy(facs->signature, "FACS", 4); |
| facs->length = cpu_to_le32(sizeof(*facs)); |
| BX_INFO("Firmware waking vector %p\n", &facs->firmware_waking_vector); |
| |
| /* DSDT */ |
| memcpy(dsdt, AmlCode, sizeof(AmlCode)); |
| |
| /* MADT */ |
| { |
| struct madt_processor_apic *apic; |
| struct madt_io_apic *io_apic; |
| #ifdef BX_QEMU |
| struct madt_int_override *int_override; |
| #endif |
| |
| memset(madt, 0, madt_size); |
| madt->local_apic_address = cpu_to_le32(0xfee00000); |
| madt->flags = cpu_to_le32(1); |
| apic = (void *)(madt + 1); |
| for(i=0;i<smp_cpus;i++) { |
| apic->type = APIC_PROCESSOR; |
| apic->length = sizeof(*apic); |
| apic->processor_id = i; |
| apic->local_apic_id = i; |
| apic->flags = cpu_to_le32(1); |
| apic++; |
| } |
| io_apic = (void *)apic; |
| io_apic->type = APIC_IO; |
| io_apic->length = sizeof(*io_apic); |
| io_apic->io_apic_id = smp_cpus; |
| io_apic->address = cpu_to_le32(0xfec00000); |
| io_apic->interrupt = cpu_to_le32(0); |
| #ifdef BX_QEMU |
| io_apic++; |
| |
| int_override = (void *)io_apic; |
| int_override->type = APIC_XRUPT_OVERRIDE; |
| int_override->length = sizeof(*int_override); |
| int_override->bus = cpu_to_le32(0); |
| int_override->source = cpu_to_le32(0); |
| int_override->gsi = cpu_to_le32(2); |
| int_override->flags = cpu_to_le32(0); |
| #endif |
| |
| acpi_build_table_header((struct acpi_table_header *)madt, |
| "APIC", madt_size, 1); |
| } |
| |
| memset(rsdt, 0, rsdt_size); |
| #ifdef BX_QEMU |
| /* SRAT */ |
| if (nb_numa_nodes > 0) { |
| struct srat_processor_affinity *core; |
| struct srat_memory_affinity *numamem; |
| int slots; |
| uint64_t mem_len, mem_base, next_base = 0, curnode; |
| |
| qemu_cfg_select(QEMU_CFG_NUMA); |
| qemu_cfg_get64(); |
| memset (srat, 0 , srat_size); |
| srat->reserved1=1; |
| |
| core = (void*)(srat + 1); |
| for (i = 0; i < smp_cpus; ++i) { |
| core->type = SRAT_PROCESSOR; |
| core->length = sizeof(*core); |
| core->local_apic_id = i; |
| curnode = qemu_cfg_get64(); |
| core->proximity_lo = curnode; |
| memset (core->proximity_hi, 0, 3); |
| core->local_sapic_eid = 0; |
| if (i < smp_cpus) |
| core->flags = cpu_to_le32(1); |
| else |
| core->flags = 0; |
| core++; |
| } |
| |
| /* the memory map is a bit tricky, it contains at least one hole |
| * from 640k-1M and possibly another one from 3.5G-4G. |
| */ |
| numamem = (void*)core; slots = 0; |
| acpi_build_srat_memory(numamem, 0, 640*1024, 0, 1); |
| next_base = 1024 * 1024; numamem++;slots++; |
| for (i = 1; i < nb_numa_nodes + 1; ++i) { |
| mem_base = next_base; |
| mem_len = qemu_cfg_get64(); |
| if (i == 1) mem_len -= 1024 * 1024; |
| next_base = mem_base + mem_len; |
| |
| /* Cut out the PCI hole */ |
| if (mem_base <= ram_size && next_base > ram_size) { |
| mem_len -= next_base - ram_size; |
| if (mem_len > 0) { |
| acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1); |
| numamem++; slots++; |
| } |
| mem_base = 1ULL << 32; |
| mem_len = next_base - ram_size; |
| next_base += (1ULL << 32) - ram_size; |
| } |
| acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1); |
| numamem++; slots++; |
| } |
| for (; slots < nb_numa_nodes + 2; slots++) { |
| acpi_build_srat_memory(numamem, 0, 0, 0, 0); |
| numamem++; |
| } |
| |
| acpi_build_table_header((struct acpi_table_header *)srat, |
| "SRAT", srat_size, 1); |
| } |
| |
| /* HPET */ |
| memset(hpet, 0, sizeof(*hpet)); |
| /* Note timer_block_id value must be kept in sync with value advertised by |
| * emulated hpet |
| */ |
| hpet->timer_block_id = cpu_to_le32(0x8086a201); |
| hpet->addr.address = cpu_to_le32(ACPI_HPET_ADDRESS); |
| acpi_build_table_header((struct acpi_table_header *)hpet, |
| "HPET", sizeof(*hpet), 1); |
| |
| acpi_additional_tables(); /* resets cfg to required entry */ |
| for(i = 0; i < external_tables; i++) { |
| uint16_t len; |
| if(acpi_load_table(i, addr, &len) < 0) |
| BX_PANIC("Failed to load ACPI table from QEMU\n"); |
| rsdt->table_offset_entry[i+4] = cpu_to_le32(addr); |
| addr += len; |
| if(addr >= ram_size) |
| BX_PANIC("ACPI table overflow\n"); |
| } |
| #endif |
| |
| /* RSDT */ |
| rsdt->table_offset_entry[0] = cpu_to_le32(fadt_addr); |
| rsdt->table_offset_entry[1] = cpu_to_le32(madt_addr); |
| rsdt->table_offset_entry[2] = cpu_to_le32(ssdt_addr); |
| #ifdef BX_QEMU |
| rsdt->table_offset_entry[3] = cpu_to_le32(hpet_addr); |
| if (nb_numa_nodes > 0) |
| rsdt->table_offset_entry[4] = cpu_to_le32(srat_addr); |
| #endif |
| acpi_build_table_header((struct acpi_table_header *)rsdt, "RSDT", |
| rsdt_size - (nb_numa_nodes > 0? 0: sizeof(uint32_t)), 1); |
| |
| acpi_tables_size = addr - base_addr; |
| |
| BX_INFO("ACPI tables: RSDP addr=0x%08lx ACPI DATA addr=0x%08lx size=0x%x\n", |
| (unsigned long)rsdp, |
| (unsigned long)rsdt, acpi_tables_size); |
| |
| } |
| |
| /* SMBIOS entry point -- must be written to a 16-bit aligned address |
| between 0xf0000 and 0xfffff. |
| */ |
| struct smbios_entry_point { |
| char anchor_string[4]; |
| uint8_t checksum; |
| uint8_t length; |
| uint8_t smbios_major_version; |
| uint8_t smbios_minor_version; |
| uint16_t max_structure_size; |
| uint8_t entry_point_revision; |
| uint8_t formatted_area[5]; |
| char intermediate_anchor_string[5]; |
| uint8_t intermediate_checksum; |
| uint16_t structure_table_length; |
| uint32_t structure_table_address; |
| uint16_t number_of_structures; |
| uint8_t smbios_bcd_revision; |
| } __attribute__((__packed__)); |
| |
| /* This goes at the beginning of every SMBIOS structure. */ |
| struct smbios_structure_header { |
| uint8_t type; |
| uint8_t length; |
| uint16_t handle; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 0 - BIOS Information */ |
| struct smbios_type_0 { |
| struct smbios_structure_header header; |
| uint8_t vendor_str; |
| uint8_t bios_version_str; |
| uint16_t bios_starting_address_segment; |
| uint8_t bios_release_date_str; |
| uint8_t bios_rom_size; |
| uint8_t bios_characteristics[8]; |
| uint8_t bios_characteristics_extension_bytes[2]; |
| uint8_t system_bios_major_release; |
| uint8_t system_bios_minor_release; |
| uint8_t embedded_controller_major_release; |
| uint8_t embedded_controller_minor_release; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 1 - System Information */ |
| struct smbios_type_1 { |
| struct smbios_structure_header header; |
| uint8_t manufacturer_str; |
| uint8_t product_name_str; |
| uint8_t version_str; |
| uint8_t serial_number_str; |
| uint8_t uuid[16]; |
| uint8_t wake_up_type; |
| uint8_t sku_number_str; |
| uint8_t family_str; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 3 - System Enclosure (v2.3) */ |
| struct smbios_type_3 { |
| struct smbios_structure_header header; |
| uint8_t manufacturer_str; |
| uint8_t type; |
| uint8_t version_str; |
| uint8_t serial_number_str; |
| uint8_t asset_tag_number_str; |
| uint8_t boot_up_state; |
| uint8_t power_supply_state; |
| uint8_t thermal_state; |
| uint8_t security_status; |
| uint32_t oem_defined; |
| uint8_t height; |
| uint8_t number_of_power_cords; |
| uint8_t contained_element_count; |
| // contained elements follow |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 4 - Processor Information (v2.0) */ |
| struct smbios_type_4 { |
| struct smbios_structure_header header; |
| uint8_t socket_designation_str; |
| uint8_t processor_type; |
| uint8_t processor_family; |
| uint8_t processor_manufacturer_str; |
| uint32_t processor_id[2]; |
| uint8_t processor_version_str; |
| uint8_t voltage; |
| uint16_t external_clock; |
| uint16_t max_speed; |
| uint16_t current_speed; |
| uint8_t status; |
| uint8_t processor_upgrade; |
| uint16_t l1_cache_handle; |
| uint16_t l2_cache_handle; |
| uint16_t l3_cache_handle; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 16 - Physical Memory Array |
| * Associated with one type 17 (Memory Device). |
| */ |
| struct smbios_type_16 { |
| struct smbios_structure_header header; |
| uint8_t location; |
| uint8_t use; |
| uint8_t error_correction; |
| uint32_t maximum_capacity; |
| uint16_t memory_error_information_handle; |
| uint16_t number_of_memory_devices; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 17 - Memory Device |
| * Associated with one type 19 |
| */ |
| struct smbios_type_17 { |
| struct smbios_structure_header header; |
| uint16_t physical_memory_array_handle; |
| uint16_t memory_error_information_handle; |
| uint16_t total_width; |
| uint16_t data_width; |
| uint16_t size; |
| uint8_t form_factor; |
| uint8_t device_set; |
| uint8_t device_locator_str; |
| uint8_t bank_locator_str; |
| uint8_t memory_type; |
| uint16_t type_detail; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 19 - Memory Array Mapped Address */ |
| struct smbios_type_19 { |
| struct smbios_structure_header header; |
| uint32_t starting_address; |
| uint32_t ending_address; |
| uint16_t memory_array_handle; |
| uint8_t partition_width; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 20 - Memory Device Mapped Address */ |
| struct smbios_type_20 { |
| struct smbios_structure_header header; |
| uint32_t starting_address; |
| uint32_t ending_address; |
| uint16_t memory_device_handle; |
| uint16_t memory_array_mapped_address_handle; |
| uint8_t partition_row_position; |
| uint8_t interleave_position; |
| uint8_t interleaved_data_depth; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 32 - System Boot Information */ |
| struct smbios_type_32 { |
| struct smbios_structure_header header; |
| uint8_t reserved[6]; |
| uint8_t boot_status; |
| } __attribute__((__packed__)); |
| |
| /* SMBIOS type 127 -- End-of-table */ |
| struct smbios_type_127 { |
| struct smbios_structure_header header; |
| } __attribute__((__packed__)); |
| |
| static void |
| smbios_entry_point_init(void *start, |
| uint16_t max_structure_size, |
| uint16_t structure_table_length, |
| uint32_t structure_table_address, |
| uint16_t number_of_structures) |
| { |
| uint8_t sum; |
| int i; |
| struct smbios_entry_point *ep = (struct smbios_entry_point *)start; |
| |
| memcpy(ep->anchor_string, "_SM_", 4); |
| ep->length = 0x1f; |
| ep->smbios_major_version = 2; |
| ep->smbios_minor_version = 4; |
| ep->max_structure_size = max_structure_size; |
| ep->entry_point_revision = 0; |
| memset(ep->formatted_area, 0, 5); |
| memcpy(ep->intermediate_anchor_string, "_DMI_", 5); |
| |
| ep->structure_table_length = structure_table_length; |
| ep->structure_table_address = structure_table_address; |
| ep->number_of_structures = number_of_structures; |
| ep->smbios_bcd_revision = 0x24; |
| |
| ep->checksum = 0; |
| ep->intermediate_checksum = 0; |
| |
| sum = 0; |
| for (i = 0; i < 0x10; i++) |
| sum += ((int8_t *)start)[i]; |
| ep->checksum = -sum; |
| |
| sum = 0; |
| for (i = 0x10; i < ep->length; i++) |
| sum += ((int8_t *)start)[i]; |
| ep->intermediate_checksum = -sum; |
| } |
| |
| struct smbios_header { |
| uint16_t length; |
| uint8_t type; |
| } __attribute__((__packed__)); |
| |
| struct smbios_field { |
| struct smbios_header header; |
| uint8_t type; |
| uint16_t offset; |
| uint8_t data[]; |
| } __attribute__((__packed__)); |
| |
| struct smbios_table { |
| struct smbios_header header; |
| uint8_t data[]; |
| } __attribute__((__packed__)); |
| |
| #define SMBIOS_FIELD_ENTRY 0 |
| #define SMBIOS_TABLE_ENTRY 1 |
| |
| static size_t |
| smbios_load_field(int type, size_t offset, void *addr) |
| { |
| #ifdef BX_QEMU |
| int i; |
| |
| for (i = smbios_entries(); i > 0; i--) { |
| struct smbios_field field; |
| |
| qemu_cfg_read((uint8_t *)&field, sizeof(struct smbios_header)); |
| field.header.length -= sizeof(struct smbios_header); |
| |
| if (field.header.type != SMBIOS_FIELD_ENTRY) { |
| while (field.header.length--) |
| inb(QEMU_CFG_DATA_PORT); |
| continue; |
| } |
| |
| qemu_cfg_read((uint8_t *)&field.type, |
| sizeof(field) - sizeof(struct smbios_header)); |
| field.header.length -= sizeof(field) - sizeof(struct smbios_header); |
| |
| if (field.type != type || field.offset != offset) { |
| while (field.header.length--) |
| inb(QEMU_CFG_DATA_PORT); |
| continue; |
| } |
| |
| qemu_cfg_read(addr, field.header.length); |
| return (size_t)field.header.length; |
| } |
| #endif |
| return 0; |
| } |
| |
| #define load_str_field_with_default(type, field, def) do { \ |
| size = smbios_load_field(type, offsetof(struct smbios_type_##type, \ |
| field), end); \ |
| if (size > 0) { \ |
| end += size; \ |
| } else { \ |
| memcpy(end, def, sizeof(def)); \ |
| end += sizeof(def); \ |
| } \ |
| p->field = ++str_index; \ |
| } while (0) |
| |
| #define load_str_field_or_skip(type, field) do { \ |
| size = smbios_load_field(type, offsetof(struct smbios_type_##type, \ |
| field), end); \ |
| if (size > 0) { \ |
| end += size; \ |
| p->field = ++str_index; \ |
| } else { \ |
| p->field = 0; \ |
| } \ |
| } while (0) |
| |
| /* Type 0 -- BIOS Information */ |
| #define RELEASE_DATE_STR "01/01/2007" |
| static void * |
| smbios_init_type_0(void *start) |
| { |
| struct smbios_type_0 *p = (struct smbios_type_0 *)start; |
| char *end = (char *)start + sizeof(struct smbios_type_0); |
| size_t size; |
| int str_index = 0; |
| |
| p->header.type = 0; |
| p->header.length = sizeof(struct smbios_type_0); |
| p->header.handle = 0; |
| |
| load_str_field_with_default(0, vendor_str, BX_APPNAME); |
| load_str_field_with_default(0, bios_version_str, BX_APPNAME); |
| |
| p->bios_starting_address_segment = 0xe800; |
| |
| load_str_field_with_default(0, bios_release_date_str, RELEASE_DATE_STR); |
| |
| p->bios_rom_size = 0; /* FIXME */ |
| |
| memset(p->bios_characteristics, 0, 8); |
| p->bios_characteristics[0] = 0x08; /* BIOS characteristics not supported */ |
| p->bios_characteristics_extension_bytes[0] = 0; |
| p->bios_characteristics_extension_bytes[1] = 0; |
| |
| if (!smbios_load_field(0, offsetof(struct smbios_type_0, |
| system_bios_major_release), |
| &p->system_bios_major_release)) |
| p->system_bios_major_release = 1; |
| |
| if (!smbios_load_field(0, offsetof(struct smbios_type_0, |
| system_bios_minor_release), |
| &p->system_bios_minor_release)) |
| p->system_bios_minor_release = 0; |
| |
| p->embedded_controller_major_release = 0xff; |
| p->embedded_controller_minor_release = 0xff; |
| |
| *end = 0; |
| end++; |
| |
| return end; |
| } |
| |
| /* Type 1 -- System Information */ |
| static void * |
| smbios_init_type_1(void *start) |
| { |
| struct smbios_type_1 *p = (struct smbios_type_1 *)start; |
| char *end = (char *)start + sizeof(struct smbios_type_1); |
| size_t size; |
| int str_index = 0; |
| |
| p->header.type = 1; |
| p->header.length = sizeof(struct smbios_type_1); |
| p->header.handle = 0x100; |
| |
| load_str_field_or_skip(1, manufacturer_str); |
| load_str_field_or_skip(1, product_name_str); |
| load_str_field_or_skip(1, version_str); |
| load_str_field_or_skip(1, serial_number_str); |
| |
| size = smbios_load_field(1, offsetof(struct smbios_type_1, |
| uuid), &p->uuid); |
| if (size == 0) |
| memset(p->uuid, 0, 16); |
| |
| p->wake_up_type = 0x06; /* power switch */ |
| |
| load_str_field_or_skip(1, sku_number_str); |
| load_str_field_or_skip(1, family_str); |
| |
| *end = 0; |
| end++; |
| if (!str_index) { |
| *end = 0; |
| end++; |
| } |
| |
| return end; |
| } |
| |
| /* Type 3 -- System Enclosure */ |
| static void * |
| smbios_init_type_3(void *start) |
| { |
| struct smbios_type_3 *p = (struct smbios_type_3 *)start; |
| |
| p->header.type = 3; |
| p->header.length = sizeof(struct smbios_type_3); |
| p->header.handle = 0x300; |
| |
| p->manufacturer_str = 0; |
| p->type = 0x01; /* other */ |
| p->version_str = 0; |
| p->serial_number_str = 0; |
| p->asset_tag_number_str = 0; |
| p->boot_up_state = 0x03; /* safe */ |
| p->power_supply_state = 0x03; /* safe */ |
| p->thermal_state = 0x03; /* safe */ |
| p->security_status = 0x02; /* unknown */ |
| p->oem_defined = 0; |
| p->height = 0; |
| p->number_of_power_cords = 0; |
| p->contained_element_count = 0; |
| |
| start += sizeof(struct smbios_type_3); |
| *((uint16_t *)start) = 0; |
| |
| return start+2; |
| } |
| |
| /* Type 4 -- Processor Information */ |
| static void * |
| smbios_init_type_4(void *start, unsigned int cpu_number) |
| { |
| struct smbios_type_4 *p = (struct smbios_type_4 *)start; |
| |
| p->header.type = 4; |
| p->header.length = sizeof(struct smbios_type_4); |
| p->header.handle = 0x400 + cpu_number; |
| |
| p->socket_designation_str = 1; |
| p->processor_type = 0x03; /* CPU */ |
| p->processor_family = 0x01; /* other */ |
| p->processor_manufacturer_str = 0; |
| |
| p->processor_id[0] = cpuid_signature; |
| p->processor_id[1] = cpuid_features; |
| |
| p->processor_version_str = 0; |
| p->voltage = 0; |
| p->external_clock = 0; |
| |
| p->max_speed = 0; /* unknown */ |
| p->current_speed = 0; /* unknown */ |
| |
| p->status = 0x41; /* socket populated, CPU enabled */ |
| p->processor_upgrade = 0x01; /* other */ |
| |
| p->l1_cache_handle = 0xffff; /* cache information structure not provided */ |
| p->l2_cache_handle = 0xffff; |
| p->l3_cache_handle = 0xffff; |
| |
| start += sizeof(struct smbios_type_4); |
| |
| memcpy((char *)start, "CPU " "\0" "" "\0" "", 7); |
| ((char *)start)[4] = cpu_number + '0'; |
| |
| return start+7; |
| } |
| |
| /* Type 16 -- Physical Memory Array */ |
| static void * |
| smbios_init_type_16(void *start, uint32_t memsize, int nr_mem_devs) |
| { |
| struct smbios_type_16 *p = (struct smbios_type_16*)start; |
| |
| p->header.type = 16; |
| p->header.length = sizeof(struct smbios_type_16); |
| p->header.handle = 0x1000; |
| |
| p->location = 0x01; /* other */ |
| p->use = 0x03; /* system memory */ |
| p->error_correction = 0x01; /* other */ |
| p->maximum_capacity = memsize * 1024; |
| p->memory_error_information_handle = 0xfffe; /* none provided */ |
| p->number_of_memory_devices = nr_mem_devs; |
| |
| start += sizeof(struct smbios_type_16); |
| *((uint16_t *)start) = 0; |
| |
| return start + 2; |
| } |
| |
| /* Type 17 -- Memory Device */ |
| static void * |
| smbios_init_type_17(void *start, uint32_t memory_size_mb, int instance) |
| { |
| struct smbios_type_17 *p = (struct smbios_type_17 *)start; |
| |
| p->header.type = 17; |
| p->header.length = sizeof(struct smbios_type_17); |
| p->header.handle = 0x1100 + instance; |
| |
| p->physical_memory_array_handle = 0x1000; |
| p->total_width = 64; |
| p->data_width = 64; |
| /* TODO: should assert in case something is wrong ASSERT((memory_size_mb & ~0x7fff) == 0); */ |
| p->size = memory_size_mb; |
| p->form_factor = 0x09; /* DIMM */ |
| p->device_set = 0; |
| p->device_locator_str = 1; |
| p->bank_locator_str = 0; |
| p->memory_type = 0x07; /* RAM */ |
| p->type_detail = 0; |
| |
| start += sizeof(struct smbios_type_17); |
| snprintf(start, 8, "DIMM %d", instance); |
| start += strlen(start) + 1; |
| *((uint8_t *)start) = 0; |
| |
| return start+1; |
| } |
| |
| /* Type 19 -- Memory Array Mapped Address */ |
| static void * |
| smbios_init_type_19(void *start, uint32_t memory_size_mb, int instance) |
| { |
| struct smbios_type_19 *p = (struct smbios_type_19 *)start; |
| |
| p->header.type = 19; |
| p->header.length = sizeof(struct smbios_type_19); |
| p->header.handle = 0x1300 + instance; |
| |
| p->starting_address = instance << 24; |
| p->ending_address = p->starting_address + (memory_size_mb << 10) - 1; |
| p->memory_array_handle = 0x1000; |
| p->partition_width = 1; |
| |
| start += sizeof(struct smbios_type_19); |
| *((uint16_t *)start) = 0; |
| |
| return start + 2; |
| } |
| |
| /* Type 20 -- Memory Device Mapped Address */ |
| static void * |
| smbios_init_type_20(void *start, uint32_t memory_size_mb, int instance) |
| { |
| struct smbios_type_20 *p = (struct smbios_type_20 *)start; |
| |
| p->header.type = 20; |
| p->header.length = sizeof(struct smbios_type_20); |
| p->header.handle = 0x1400 + instance; |
| |
| p->starting_address = instance << 24; |
| p->ending_address = p->starting_address + (memory_size_mb << 10) - 1; |
| p->memory_device_handle = 0x1100 + instance; |
| p->memory_array_mapped_address_handle = 0x1300 + instance; |
| p->partition_row_position = 1; |
| p->interleave_position = 0; |
| p->interleaved_data_depth = 0; |
| |
| start += sizeof(struct smbios_type_20); |
| |
| *((uint16_t *)start) = 0; |
| return start+2; |
| } |
| |
| /* Type 32 -- System Boot Information */ |
| static void * |
| smbios_init_type_32(void *start) |
| { |
| struct smbios_type_32 *p = (struct smbios_type_32 *)start; |
| |
| p->header.type = 32; |
| p->header.length = sizeof(struct smbios_type_32); |
| p->header.handle = 0x2000; |
| memset(p->reserved, 0, 6); |
| p->boot_status = 0; /* no errors detected */ |
| |
| start += sizeof(struct smbios_type_32); |
| *((uint16_t *)start) = 0; |
| |
| return start+2; |
| } |
| |
| /* Type 127 -- End of Table */ |
| static void * |
| smbios_init_type_127(void *start) |
| { |
| struct smbios_type_127 *p = (struct smbios_type_127 *)start; |
| |
| p->header.type = 127; |
| p->header.length = sizeof(struct smbios_type_127); |
| p->header.handle = 0x7f00; |
| |
| start += sizeof(struct smbios_type_127); |
| *((uint16_t *)start) = 0; |
| |
| return start + 2; |
| } |
| |
| static int |
| smbios_load_external(int type, char **p, unsigned *nr_structs, |
| unsigned *max_struct_size) |
| { |
| #ifdef BX_QEMU |
| static uint64_t used_bitmap[4] = { 0 }; |
| char *start = *p; |
| int i; |
| |
| /* Check if we've already reported these tables */ |
| if (used_bitmap[(type >> 6) & 0x3] & (1ULL << (type & 0x3f))) |
| return 1; |
| |
| /* Don't introduce spurious end markers */ |
| if (type == 127) |
| return 0; |
| |
| for (i = smbios_entries(); i > 0; i--) { |
| struct smbios_table table; |
| struct smbios_structure_header *header = (void *)*p; |
| int string; |
| |
| qemu_cfg_read((uint8_t *)&table, sizeof(struct smbios_header)); |
| table.header.length -= sizeof(struct smbios_header); |
| |
| if (table.header.type != SMBIOS_TABLE_ENTRY) { |
| while (table.header.length--) |
| inb(QEMU_CFG_DATA_PORT); |
| continue; |
| } |
| |
| qemu_cfg_read((uint8_t *)*p, sizeof(struct smbios_structure_header)); |
| table.header.length -= sizeof(struct smbios_structure_header); |
| |
| if (header->type != type) { |
| while (table.header.length--) |
| inb(QEMU_CFG_DATA_PORT); |
| continue; |
| } |
| |
| *p += sizeof(struct smbios_structure_header); |
| |
| /* Entries end with a double NULL char, if there's a string at |
| * the end (length is greater than formatted length), the string |
| * terminator provides the first NULL. */ |
| string = header->length < table.header.length + |
| sizeof(struct smbios_structure_header); |
| |
| /* Read the rest and terminate the entry */ |
| qemu_cfg_read((uint8_t *)*p, table.header.length); |
| *p += table.header.length; |
| *((uint8_t*)*p) = 0; |
| (*p)++; |
| if (!string) { |
| *((uint8_t*)*p) = 0; |
| (*p)++; |
| } |
| |
| (*nr_structs)++; |
| if (*p - (char *)header > *max_struct_size) |
| *max_struct_size = *p - (char *)header; |
| } |
| |
| /* Mark that we've reported on this type */ |
| used_bitmap[(type >> 6) & 0x3] |= (1ULL << (type & 0x3f)); |
| |
| return (start != *p); |
| #else /* !BX_QEMU */ |
| return 0; |
| #endif |
| } |
| |
| void smbios_init(void) |
| { |
| unsigned cpu_num, nr_structs = 0, max_struct_size = 0; |
| char *start, *p, *q; |
| int memsize = (ram_end == ram_size) ? ram_size / (1024 * 1024) : |
| (ram_end - (1ull << 32) + ram_size) / (1024 * 1024); |
| int i, nr_mem_devs; |
| |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr = align(ebda_cur_addr, 16); |
| start = (void *)(ebda_cur_addr); |
| #else |
| bios_table_cur_addr = align(bios_table_cur_addr, 16); |
| start = (void *)(bios_table_cur_addr); |
| #endif |
| |
| p = (char *)start + sizeof(struct smbios_entry_point); |
| |
| #define add_struct(type, args...) do { \ |
| if (!smbios_load_external(type, &p, &nr_structs, &max_struct_size)) { \ |
| q = smbios_init_type_##type(args); \ |
| nr_structs++; \ |
| if ((q - p) > max_struct_size) \ |
| max_struct_size = q - p; \ |
| p = q; \ |
| } \ |
| } while (0) |
| |
| add_struct(0, p); |
| add_struct(1, p); |
| add_struct(3, p); |
| for (cpu_num = 1; cpu_num <= smp_cpus; cpu_num++) |
| add_struct(4, p, cpu_num); |
| |
| /* Each 'memory device' covers up to 16GB of address space. */ |
| nr_mem_devs = (memsize + 0x3fff) >> 14; |
| add_struct(16, p, memsize, nr_mem_devs); |
| for ( i = 0; i < nr_mem_devs; i++ ) |
| { |
| uint32_t dev_memsize = ((i == (nr_mem_devs - 1)) |
| ? (((memsize-1) & 0x3fff)+1) : 0x4000); |
| add_struct(17, p, dev_memsize, i); |
| add_struct(19, p, dev_memsize, i); |
| add_struct(20, p, dev_memsize, i); |
| } |
| |
| add_struct(32, p); |
| /* Add any remaining provided entries before the end marker */ |
| for (i = 0; i < 256; i++) |
| smbios_load_external(i, &p, &nr_structs, &max_struct_size); |
| add_struct(127, p); |
| |
| #undef add_struct |
| |
| smbios_entry_point_init( |
| start, max_struct_size, |
| (p - (char *)start) - sizeof(struct smbios_entry_point), |
| (uint32_t)(start + sizeof(struct smbios_entry_point)), |
| nr_structs); |
| |
| #ifdef BX_USE_EBDA_TABLES |
| ebda_cur_addr += (p - (char *)start); |
| #else |
| bios_table_cur_addr += (p - (char *)start); |
| #endif |
| |
| BX_INFO("SMBIOS table addr=0x%08lx\n", (unsigned long)start); |
| } |
| |
| static uint32_t find_resume_vector(void) |
| { |
| unsigned long addr, start, end; |
| |
| #ifdef BX_USE_EBDA_TABLES |
| start = align(ebda_cur_addr, 16); |
| end = 0xa000 << 4; |
| #else |
| if (bios_table_cur_addr == 0) |
| return 0; |
| start = align(bios_table_cur_addr, 16); |
| end = bios_table_end_addr; |
| #endif |
| |
| for (addr = start; addr < end; addr += 16) { |
| if (!memcmp((void*)addr, "RSD PTR ", 8)) { |
| struct rsdp_descriptor *rsdp = (void*)addr; |
| struct rsdt_descriptor_rev1 *rsdt = (void*)rsdp->rsdt_physical_address; |
| struct fadt_descriptor_rev1 *fadt = (void*)rsdt->table_offset_entry[0]; |
| struct facs_descriptor_rev1 *facs = (void*)fadt->firmware_ctrl; |
| return facs->firmware_waking_vector; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void find_440fx(PCIDevice *d) |
| { |
| uint16_t vendor_id, device_id; |
| |
| vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
| device_id = pci_config_readw(d, PCI_DEVICE_ID); |
| |
| if (vendor_id == PCI_VENDOR_ID_INTEL && device_id == PCI_DEVICE_ID_INTEL_82441) |
| i440_pcidev = *d; |
| } |
| |
| static void reinit_piix4_pm(PCIDevice *d) |
| { |
| uint16_t vendor_id, device_id; |
| |
| vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
| device_id = pci_config_readw(d, PCI_DEVICE_ID); |
| |
| if (vendor_id == PCI_VENDOR_ID_INTEL && device_id == PCI_DEVICE_ID_INTEL_82371AB_3) |
| piix4_pm_enable(d); |
| } |
| |
| void rombios32_init(uint32_t *s3_resume_vector, uint8_t *shutdown_flag) |
| { |
| BX_INFO("Starting rombios32\n"); |
| BX_INFO("Shutdown flag %x\n", *shutdown_flag); |
| |
| #ifdef BX_QEMU |
| qemu_cfg_port = qemu_cfg_port_probe(); |
| #endif |
| |
| ram_probe(); |
| |
| cpu_probe(); |
| |
| setup_mtrr(); |
| |
| smp_probe(); |
| |
| find_bios_table_area(); |
| |
| if (*shutdown_flag == 0xfe) { |
| /* redirect bios read access to RAM */ |
| pci_for_each_device(find_440fx); |
| bios_lock_shadow_ram(); /* bios is already copied */ |
| *s3_resume_vector = find_resume_vector(); |
| if (!*s3_resume_vector) { |
| BX_INFO("This is S3 resume but wakeup vector is NULL\n"); |
| } else { |
| BX_INFO("S3 resume vector %p\n", *s3_resume_vector); |
| pci_for_each_device(reinit_piix4_pm); |
| } |
| return; |
| } |
| |
| pci_bios_init(); |
| |
| if (bios_table_cur_addr != 0) { |
| |
| mptable_init(); |
| |
| smbios_init(); |
| |
| if (acpi_enabled) |
| acpi_bios_init(); |
| |
| bios_lock_shadow_ram(); |
| |
| BX_INFO("bios_table_cur_addr: 0x%08lx\n", bios_table_cur_addr); |
| if (bios_table_cur_addr > bios_table_end_addr) |
| BX_PANIC("bios_table_end_addr overflow!\n"); |
| #ifdef BX_USE_EBDA_TABLES |
| BX_INFO("ebda_cur_addr: 0x%08lx\n", ebda_cur_addr); |
| if (ebda_cur_addr > 0xA0000) |
| BX_PANIC("ebda_cur_addr overflow!\n"); |
| #endif |
| } |
| } |