
/*
 * Copyright 2012 Google Inc.
 *
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "GrAAConvexPathRenderer.h"

#include "GrContext.h"
#include "GrDrawState.h"
#include "GrPathUtils.h"
#include "SkString.h"
#include "SkStrokeRec.h"
#include "SkTrace.h"

GrAAConvexPathRenderer::GrAAConvexPathRenderer() {
}

namespace {

struct Segment {
    enum {
        // These enum values are assumed in member functions below.
        kLine = 0,
        kQuad = 1,
    } fType;

    // line uses one pt, quad uses 2 pts
    GrPoint fPts[2];
    // normal to edge ending at each pt
    GrVec fNorms[2];
    // is the corner where the previous segment meets this segment
    // sharp. If so, fMid is a normalized bisector facing outward.
    GrVec fMid;

    int countPoints() {
        GR_STATIC_ASSERT(0 == kLine && 1 == kQuad);
        return fType + 1;
    }
    const SkPoint& endPt() const {
        GR_STATIC_ASSERT(0 == kLine && 1 == kQuad);
        return fPts[fType];
    };
    const SkPoint& endNorm() const {
        GR_STATIC_ASSERT(0 == kLine && 1 == kQuad);
        return fNorms[fType];
    };
};

typedef SkTArray<Segment, true> SegmentArray;

void center_of_mass(const SegmentArray& segments, SkPoint* c) {
    SkScalar area = 0;
    SkPoint center = {0, 0};
    int count = segments.count();
    SkPoint p0 = {0, 0};
    if (count > 2) {
        // We translate the polygon so that the first point is at the origin.
        // This avoids some precision issues with small area polygons far away
        // from the origin.
        p0 = segments[0].endPt();
        SkPoint pi;
        SkPoint pj;
        // the first and last iteration of the below loop would compute
        // zeros since the starting / ending point is (0,0). So instead we start
        // at i=1 and make the last iteration i=count-2.
        pj = segments[1].endPt() - p0;
        for (int i = 1; i < count - 1; ++i) {
            pi = pj;
            const SkPoint pj = segments[i + 1].endPt() - p0;

            SkScalar t = SkScalarMul(pi.fX, pj.fY) - SkScalarMul(pj.fX, pi.fY);
            area += t;
            center.fX += (pi.fX + pj.fX) * t;
            center.fY += (pi.fY + pj.fY) * t;

        }
    }
    // If the poly has no area then we instead return the average of
    // its points.
    if (SkScalarNearlyZero(area)) {
        SkPoint avg;
        avg.set(0, 0);
        for (int i = 0; i < count; ++i) {
            const SkPoint& pt = segments[i].endPt();
            avg.fX += pt.fX;
            avg.fY += pt.fY;
        }
        SkScalar denom = SK_Scalar1 / count;
        avg.scale(denom);
        *c = avg;
    } else {
        area *= 3;
        area = SkScalarDiv(SK_Scalar1, area);
        center.fX = SkScalarMul(center.fX, area);
        center.fY = SkScalarMul(center.fY, area);
        // undo the translate of p0 to the origin.
        *c = center + p0;
    }
    GrAssert(!SkScalarIsNaN(c->fX) && !SkScalarIsNaN(c->fY));
}

void compute_vectors(SegmentArray* segments,
                     SkPoint* fanPt,
                     SkPath::Direction dir,
                     int* vCount,
                     int* iCount) {
    center_of_mass(*segments, fanPt);
    int count = segments->count();

    // Make the normals point towards the outside
    GrPoint::Side normSide;
    if (dir == SkPath::kCCW_Direction) {
        normSide = GrPoint::kRight_Side;
    } else {
        normSide = GrPoint::kLeft_Side;
    }

    *vCount = 0;
    *iCount = 0;
    // compute normals at all points
    for (int a = 0; a < count; ++a) {
        const Segment& sega = (*segments)[a];
        int b = (a + 1) % count;
        Segment& segb = (*segments)[b];

        const GrPoint* prevPt = &sega.endPt();
        int n = segb.countPoints();
        for (int p = 0; p < n; ++p) {
            segb.fNorms[p] = segb.fPts[p] - *prevPt;
            segb.fNorms[p].normalize();
            segb.fNorms[p].setOrthog(segb.fNorms[p], normSide);
            prevPt = &segb.fPts[p];
        }
        if (Segment::kLine == segb.fType) {
            *vCount += 5;
            *iCount += 9;
        } else {
            *vCount += 6;
            *iCount += 12;
        }
    }

    // compute mid-vectors where segments meet. TODO: Detect shallow corners
    // and leave out the wedges and close gaps by stitching segments together.
    for (int a = 0; a < count; ++a) {
        const Segment& sega = (*segments)[a];
        int b = (a + 1) % count;
        Segment& segb = (*segments)[b];
        segb.fMid = segb.fNorms[0] + sega.endNorm();
        segb.fMid.normalize();
        // corner wedges
        *vCount += 4;
        *iCount += 6;
    }
}

struct DegenerateTestData {
    DegenerateTestData() { fStage = kInitial; }
    bool isDegenerate() const { return kNonDegenerate != fStage; }
    enum {
        kInitial,
        kPoint,
        kLine,
        kNonDegenerate
    }           fStage;
    GrPoint     fFirstPoint;
    GrVec       fLineNormal;
    SkScalar    fLineC;
};

void update_degenerate_test(DegenerateTestData* data, const GrPoint& pt) {
    static const SkScalar TOL = (SK_Scalar1 / 16);
    static const SkScalar TOL_SQD = SkScalarMul(TOL, TOL);

    switch (data->fStage) {
        case DegenerateTestData::kInitial:
            data->fFirstPoint = pt;
            data->fStage = DegenerateTestData::kPoint;
            break;
        case DegenerateTestData::kPoint:
            if (pt.distanceToSqd(data->fFirstPoint) > TOL_SQD) {
                data->fLineNormal = pt - data->fFirstPoint;
                data->fLineNormal.normalize();
                data->fLineNormal.setOrthog(data->fLineNormal);
                data->fLineC = -data->fLineNormal.dot(data->fFirstPoint);
                data->fStage = DegenerateTestData::kLine;
            }
            break;
        case DegenerateTestData::kLine:
            if (SkScalarAbs(data->fLineNormal.dot(pt) + data->fLineC) > TOL) {
                data->fStage = DegenerateTestData::kNonDegenerate;
            }
        case DegenerateTestData::kNonDegenerate:
            break;
        default:
            GrCrash("Unexpected degenerate test stage.");
    }
}

inline bool get_direction(const SkPath& path, const SkMatrix& m, SkPath::Direction* dir) {
    if (!path.cheapComputeDirection(dir)) {
        return false;
    }
    // check whether m reverses the orientation
    GrAssert(!m.hasPerspective());
    SkScalar det2x2 = SkScalarMul(m.get(SkMatrix::kMScaleX), m.get(SkMatrix::kMScaleY)) -
                      SkScalarMul(m.get(SkMatrix::kMSkewX), m.get(SkMatrix::kMSkewY));
    if (det2x2 < 0) {
        *dir = SkPath::OppositeDirection(*dir);
    }
    return true;
}

bool get_segments(const SkPath& path,
                  const SkMatrix& m,
                  SegmentArray* segments,
                  SkPoint* fanPt,
                  int* vCount,
                  int* iCount) {
    SkPath::Iter iter(path, true);
    // This renderer over-emphasizes very thin path regions. We use the distance
    // to the path from the sample to compute coverage. Every pixel intersected
    // by the path will be hit and the maximum distance is sqrt(2)/2. We don't
    // notice that the sample may be close to a very thin area of the path and
    // thus should be very light. This is particularly egregious for degenerate
    // line paths. We detect paths that are very close to a line (zero area) and
    // draw nothing.
    DegenerateTestData degenerateData;
    SkPath::Direction dir;
    // get_direction can fail for some degenerate paths.
    if (!get_direction(path, m, &dir)) {
        return false;
    }

    for (;;) {
        GrPoint pts[4];
        GrPathCmd cmd = (GrPathCmd)iter.next(pts);
        switch (cmd) {
            case kMove_PathCmd:
                m.mapPoints(pts, 1);
                update_degenerate_test(&degenerateData, pts[0]);
                break;
            case kLine_PathCmd: {
                m.mapPoints(pts + 1, 1);
                update_degenerate_test(&degenerateData, pts[1]);
                segments->push_back();
                segments->back().fType = Segment::kLine;
                segments->back().fPts[0] = pts[1];
                break;
            }
            case kQuadratic_PathCmd:
                m.mapPoints(pts + 1, 2);
                update_degenerate_test(&degenerateData, pts[1]);
                update_degenerate_test(&degenerateData, pts[2]);
                segments->push_back();
                segments->back().fType = Segment::kQuad;
                segments->back().fPts[0] = pts[1];
                segments->back().fPts[1] = pts[2];
                break;
            case kCubic_PathCmd: {
                m.mapPoints(pts, 4);
                update_degenerate_test(&degenerateData, pts[1]);
                update_degenerate_test(&degenerateData, pts[2]);
                update_degenerate_test(&degenerateData, pts[3]);
                // unlike quads and lines, the pts[0] will also be read (in
                // convertCubicToQuads).
                SkSTArray<15, SkPoint, true> quads;
                GrPathUtils::convertCubicToQuads(pts, SK_Scalar1, true, dir, &quads);
                int count = quads.count();
                for (int q = 0; q < count; q += 3) {
                    segments->push_back();
                    segments->back().fType = Segment::kQuad;
                    segments->back().fPts[0] = quads[q + 1];
                    segments->back().fPts[1] = quads[q + 2];
                }
                break;
            };
            case kEnd_PathCmd:
                if (degenerateData.isDegenerate()) {
                    return false;
                } else {
                    compute_vectors(segments, fanPt, dir, vCount, iCount);
                    return true;
                }
            default:
                break;
        }
    }
}

struct QuadVertex {
    GrPoint  fPos;
    GrPoint  fUV;
    SkScalar fD0;
    SkScalar fD1;
};

void create_vertices(const SegmentArray&  segments,
                     const SkPoint& fanPt,
                     QuadVertex*    verts,
                     uint16_t*      idxs) {
    int v = 0;
    int i = 0;

    int count = segments.count();
    for (int a = 0; a < count; ++a) {
        const Segment& sega = segments[a];
        int b = (a + 1) % count;
        const Segment& segb = segments[b];

        // FIXME: These tris are inset in the 1 unit arc around the corner
        verts[v + 0].fPos = sega.endPt();
        verts[v + 1].fPos = verts[v + 0].fPos + sega.endNorm();
        verts[v + 2].fPos = verts[v + 0].fPos + segb.fMid;
        verts[v + 3].fPos = verts[v + 0].fPos + segb.fNorms[0];
        verts[v + 0].fUV.set(0,0);
        verts[v + 1].fUV.set(0,-SK_Scalar1);
        verts[v + 2].fUV.set(0,-SK_Scalar1);
        verts[v + 3].fUV.set(0,-SK_Scalar1);
        verts[v + 0].fD0 = verts[v + 0].fD1 = -SK_Scalar1;
        verts[v + 1].fD0 = verts[v + 1].fD1 = -SK_Scalar1;
        verts[v + 2].fD0 = verts[v + 2].fD1 = -SK_Scalar1;
        verts[v + 3].fD0 = verts[v + 3].fD1 = -SK_Scalar1;

        idxs[i + 0] = v + 0;
        idxs[i + 1] = v + 2;
        idxs[i + 2] = v + 1;
        idxs[i + 3] = v + 0;
        idxs[i + 4] = v + 3;
        idxs[i + 5] = v + 2;

        v += 4;
        i += 6;

        if (Segment::kLine == segb.fType) {
            verts[v + 0].fPos = fanPt;
            verts[v + 1].fPos = sega.endPt();
            verts[v + 2].fPos = segb.fPts[0];

            verts[v + 3].fPos = verts[v + 1].fPos + segb.fNorms[0];
            verts[v + 4].fPos = verts[v + 2].fPos + segb.fNorms[0];

            // we draw the line edge as a degenerate quad (u is 0, v is the
            // signed distance to the edge)
            SkScalar dist = fanPt.distanceToLineBetween(verts[v + 1].fPos,
                                                        verts[v + 2].fPos);
            verts[v + 0].fUV.set(0, dist);
            verts[v + 1].fUV.set(0, 0);
            verts[v + 2].fUV.set(0, 0);
            verts[v + 3].fUV.set(0, -SK_Scalar1);
            verts[v + 4].fUV.set(0, -SK_Scalar1);

            verts[v + 0].fD0 = verts[v + 0].fD1 = -SK_Scalar1;
            verts[v + 1].fD0 = verts[v + 1].fD1 = -SK_Scalar1;
            verts[v + 2].fD0 = verts[v + 2].fD1 = -SK_Scalar1;
            verts[v + 3].fD0 = verts[v + 3].fD1 = -SK_Scalar1;
            verts[v + 4].fD0 = verts[v + 4].fD1 = -SK_Scalar1;

            idxs[i + 0] = v + 0;
            idxs[i + 1] = v + 2;
            idxs[i + 2] = v + 1;

            idxs[i + 3] = v + 3;
            idxs[i + 4] = v + 1;
            idxs[i + 5] = v + 2;

            idxs[i + 6] = v + 4;
            idxs[i + 7] = v + 3;
            idxs[i + 8] = v + 2;

            v += 5;
            i += 9;
        } else {
            GrPoint qpts[] = {sega.endPt(), segb.fPts[0], segb.fPts[1]};

            GrVec midVec = segb.fNorms[0] + segb.fNorms[1];
            midVec.normalize();

            verts[v + 0].fPos = fanPt;
            verts[v + 1].fPos = qpts[0];
            verts[v + 2].fPos = qpts[2];
            verts[v + 3].fPos = qpts[0] + segb.fNorms[0];
            verts[v + 4].fPos = qpts[2] + segb.fNorms[1];
            verts[v + 5].fPos = qpts[1] + midVec;

            SkScalar c = segb.fNorms[0].dot(qpts[0]);
            verts[v + 0].fD0 =  -segb.fNorms[0].dot(fanPt) + c;
            verts[v + 1].fD0 =  0.f;
            verts[v + 2].fD0 =  -segb.fNorms[0].dot(qpts[2]) + c;
            verts[v + 3].fD0 = -SK_ScalarMax/100;
            verts[v + 4].fD0 = -SK_ScalarMax/100;
            verts[v + 5].fD0 = -SK_ScalarMax/100;

            c = segb.fNorms[1].dot(qpts[2]);
            verts[v + 0].fD1 =  -segb.fNorms[1].dot(fanPt) + c;
            verts[v + 1].fD1 =  -segb.fNorms[1].dot(qpts[0]) + c;
            verts[v + 2].fD1 =  0.f;
            verts[v + 3].fD1 = -SK_ScalarMax/100;
            verts[v + 4].fD1 = -SK_ScalarMax/100;
            verts[v + 5].fD1 = -SK_ScalarMax/100;

            GrPathUtils::QuadUVMatrix toUV(qpts);
            toUV.apply<6, sizeof(QuadVertex), sizeof(GrPoint)>(verts + v);

            idxs[i + 0] = v + 3;
            idxs[i + 1] = v + 1;
            idxs[i + 2] = v + 2;
            idxs[i + 3] = v + 4;
            idxs[i + 4] = v + 3;
            idxs[i + 5] = v + 2;

            idxs[i + 6] = v + 5;
            idxs[i + 7] = v + 3;
            idxs[i + 8] = v + 4;

            idxs[i +  9] = v + 0;
            idxs[i + 10] = v + 2;
            idxs[i + 11] = v + 1;

            v += 6;
            i += 12;
        }
    }
}

}

bool GrAAConvexPathRenderer::canDrawPath(const SkPath& path,
                                         const SkStrokeRec& stroke,
                                         const GrDrawTarget* target,
                                         bool antiAlias) const {
    return (target->getCaps().shaderDerivativeSupport() && antiAlias &&
            stroke.isFillStyle() && !path.isInverseFillType() && path.isConvex());
}

bool GrAAConvexPathRenderer::onDrawPath(const SkPath& origPath,
                                        const SkStrokeRec&,
                                        GrDrawTarget* target,
                                        bool antiAlias) {

    const SkPath* path = &origPath;
    if (path->isEmpty()) {
        return true;
    }
    GrDrawState* drawState = target->drawState();

    GrDrawState::AutoDeviceCoordDraw adcd(drawState);
    if (!adcd.succeeded()) {
        return false;
    }
    const SkMatrix* vm = &adcd.getOriginalMatrix();

    GrVertexLayout layout = 0;
    layout |= GrDrawState::kEdge_VertexLayoutBit;

    // We use the fact that SkPath::transform path does subdivision based on
    // perspective. Otherwise, we apply the view matrix when copying to the
    // segment representation.
    SkPath tmpPath;
    if (vm->hasPerspective()) {
        origPath.transform(*vm, &tmpPath);
        path = &tmpPath;
        vm = &SkMatrix::I();
    }

    QuadVertex *verts;
    uint16_t* idxs;

    int vCount;
    int iCount;
    enum {
        kPreallocSegmentCnt = 512 / sizeof(Segment),
    };
    SkSTArray<kPreallocSegmentCnt, Segment, true> segments;
    SkPoint fanPt;

    if (!get_segments(*path, *vm, &segments, &fanPt, &vCount, &iCount)) {
        return false;
    }

    GrDrawTarget::AutoReleaseGeometry arg(target, layout, vCount, iCount);
    if (!arg.succeeded()) {
        return false;
    }
    verts = reinterpret_cast<QuadVertex*>(arg.vertices());
    idxs = reinterpret_cast<uint16_t*>(arg.indices());

    create_vertices(segments, fanPt, verts, idxs);

    GrDrawState::VertexEdgeType oldEdgeType = drawState->getVertexEdgeType();
    drawState->setVertexEdgeType(GrDrawState::kQuad_EdgeType);
    target->drawIndexed(kTriangles_GrPrimitiveType,
                        0,        // start vertex
                        0,        // start index
                        vCount,
                        iCount);
    drawState->setVertexEdgeType(oldEdgeType);

    return true;
}