| // Copyright 2012 the V8 project authors. All rights reserved. |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // * Neither the name of Google Inc. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| // Flags: --allow-natives-syntax --expose-gc |
| |
| // This is a regression test for overlapping key and value registers. |
| function f(a) { |
| a[0] = 0; |
| a[1] = 0; |
| } |
| |
| var a = new Int32Array(2); |
| for (var i = 0; i < 5; i++) { |
| f(a); |
| } |
| %OptimizeFunctionOnNextCall(f); |
| f(a); |
| |
| assertEquals(0, a[0]); |
| assertEquals(0, a[1]); |
| |
| // No-parameter constructor should fail right now. |
| function abfunc1() { |
| return new ArrayBuffer(); |
| } |
| assertThrows(abfunc1); |
| |
| // Test derivation from an ArrayBuffer |
| var ab = new ArrayBuffer(12); |
| var derived_uint8 = new Uint8Array(ab); |
| assertEquals(12, derived_uint8.length); |
| var derived_uint32 = new Uint32Array(ab); |
| assertEquals(3, derived_uint32.length); |
| var derived_uint32_2 = new Uint32Array(ab,4); |
| assertEquals(2, derived_uint32_2.length); |
| var derived_uint32_3 = new Uint32Array(ab,4,1); |
| assertEquals(1, derived_uint32_3.length); |
| |
| // If a given byteOffset and length references an area beyond the end of the |
| // ArrayBuffer an exception is raised. |
| function abfunc3() { |
| new Uint32Array(ab,4,3); |
| } |
| assertThrows(abfunc3); |
| function abfunc4() { |
| new Uint32Array(ab,16); |
| } |
| assertThrows(abfunc4); |
| |
| // The given byteOffset must be a multiple of the element size of the specific |
| // type, otherwise an exception is raised. |
| function abfunc5() { |
| new Uint32Array(ab,5); |
| } |
| assertThrows(abfunc5); |
| |
| // If length is not explicitly specified, the length of the ArrayBuffer minus |
| // the byteOffset must be a multiple of the element size of the specific type, |
| // or an exception is raised. |
| var ab2 = new ArrayBuffer(13); |
| function abfunc6() { |
| new Uint32Array(ab2,4); |
| } |
| assertThrows(abfunc6); |
| |
| // Test the correct behavior of the |BYTES_PER_ELEMENT| property (which is |
| // "constant", but not read-only). |
| a = new Int32Array(2); |
| assertEquals(4, a.BYTES_PER_ELEMENT); |
| a.BYTES_PER_ELEMENT = 42; |
| assertEquals(42, a.BYTES_PER_ELEMENT); |
| a = new Uint8Array(2); |
| assertEquals(1, a.BYTES_PER_ELEMENT); |
| a = new Int16Array(2); |
| assertEquals(2, a.BYTES_PER_ELEMENT); |
| |
| // Test Float64Arrays. |
| function get(a, index) { |
| return a[index]; |
| } |
| function set(a, index, value) { |
| a[index] = value; |
| } |
| function temp() { |
| var array = new Float64Array(2); |
| for (var i = 0; i < 5; i++) { |
| set(array, 0, 2.5); |
| assertEquals(2.5, array[0]); |
| } |
| %OptimizeFunctionOnNextCall(set); |
| set(array, 0, 2.5); |
| assertEquals(2.5, array[0]); |
| set(array, 1, 3.5); |
| assertEquals(3.5, array[1]); |
| for (var i = 0; i < 5; i++) { |
| assertEquals(2.5, get(array, 0)); |
| assertEquals(3.5, array[1]); |
| } |
| %OptimizeFunctionOnNextCall(get); |
| assertEquals(2.5, get(array, 0)); |
| assertEquals(3.5, get(array, 1)); |
| } |
| |
| // Test non-number parameters. |
| var array_with_length_from_non_number = new Int32Array("2"); |
| assertEquals(2, array_with_length_from_non_number.length); |
| array_with_length_from_non_number = new Int32Array(undefined); |
| assertEquals(0, array_with_length_from_non_number.length); |
| var foo = { valueOf: function() { return 3; } }; |
| array_with_length_from_non_number = new Int32Array(foo); |
| assertEquals(3, array_with_length_from_non_number.length); |
| foo = { toString: function() { return "4"; } }; |
| array_with_length_from_non_number = new Int32Array(foo); |
| assertEquals(4, array_with_length_from_non_number.length); |
| |
| |
| // Test loads and stores. |
| types = [Array, Int8Array, Uint8Array, Int16Array, Uint16Array, Int32Array, |
| Uint32Array, PixelArray, Float32Array, Float64Array]; |
| |
| test_result_nan = [NaN, 0, 0, 0, 0, 0, 0, 0, NaN, NaN]; |
| test_result_low_int = [-1, -1, 255, -1, 65535, -1, 0xFFFFFFFF, 0, -1, -1]; |
| test_result_low_double = [-1.25, -1, 255, -1, 65535, -1, 0xFFFFFFFF, 0, -1.25, -1.25]; |
| test_result_middle = [253.75, -3, 253, 253, 253, 253, 253, 254, 253.75, 253.75]; |
| test_result_high_int = [256, 0, 0, 256, 256, 256, 256, 255, 256, 256]; |
| test_result_high_double = [256.25, 0, 0, 256, 256, 256, 256, 255, 256.25, 256.25]; |
| |
| const kElementCount = 40; |
| |
| function test_load(array, sum) { |
| for (var i = 0; i < kElementCount; i++) { |
| sum += array[i]; |
| } |
| return sum; |
| } |
| |
| function test_load_const_key(array, sum) { |
| sum += array[0]; |
| sum += array[1]; |
| sum += array[2]; |
| return sum; |
| } |
| |
| function test_store(array, sum) { |
| for (var i = 0; i < kElementCount; i++) { |
| sum += array[i] = i+1; |
| } |
| return sum; |
| } |
| |
| function test_store_const_key(array, sum) { |
| sum += array[0] = 1; |
| sum += array[1] = 2; |
| sum += array[2] = 3; |
| return sum; |
| } |
| |
| function zero() { |
| return 0.0; |
| } |
| |
| function test_store_middle_tagged(array, sum) { |
| array[0] = 253.75; |
| return array[0]; |
| } |
| |
| function test_store_high_tagged(array, sum) { |
| array[0] = 256.25; |
| return array[0]; |
| } |
| |
| function test_store_middle_double(array, sum) { |
| array[0] = 253.75 + zero(); // + forces double type feedback |
| return array[0]; |
| } |
| |
| function test_store_high_double(array, sum) { |
| array[0] = 256.25 + zero(); // + forces double type feedback |
| return array[0]; |
| } |
| |
| function test_store_high_double(array, sum) { |
| array[0] = 256.25; |
| return array[0]; |
| } |
| |
| function test_store_low_int(array, sum) { |
| array[0] = -1; |
| return array[0]; |
| } |
| |
| function test_store_low_tagged(array, sum) { |
| array[0] = -1.25; |
| return array[0]; |
| } |
| |
| function test_store_low_double(array, sum) { |
| array[0] = -1.25 + zero(); // + forces double type feedback |
| return array[0]; |
| } |
| |
| function test_store_high_int(array, sum) { |
| array[0] = 256; |
| return array[0]; |
| } |
| |
| function test_store_nan(array, sum) { |
| array[0] = NaN; |
| return array[0]; |
| } |
| |
| const kRuns = 10; |
| |
| function run_test(test_func, array, expected_result) { |
| for (var i = 0; i < 5; i++) test_func(array, 0); |
| %OptimizeFunctionOnNextCall(test_func); |
| var sum = 0; |
| for (var i = 0; i < kRuns; i++) { |
| sum = test_func(array, sum); |
| } |
| assertEquals(expected_result, sum); |
| %DeoptimizeFunction(test_func); |
| gc(); // Makes V8 forget about type information for test_func. |
| } |
| |
| function run_bounds_test(test_func, array, expected_result) { |
| assertEquals(undefined, a[kElementCount]); |
| a[kElementCount] = 456; |
| assertEquals(undefined, a[kElementCount]); |
| assertEquals(undefined, a[kElementCount+1]); |
| a[kElementCount+1] = 456; |
| assertEquals(undefined, a[kElementCount+1]); |
| } |
| |
| for (var t = 0; t < types.length; t++) { |
| var type = types[t]; |
| var a = new type(kElementCount); |
| |
| for (var i = 0; i < kElementCount; i++) { |
| a[i] = i; |
| } |
| |
| // Run test functions defined above. |
| run_test(test_load, a, 780 * kRuns); |
| run_test(test_load_const_key, a, 3 * kRuns); |
| run_test(test_store, a, 820 * kRuns); |
| run_test(test_store_const_key, a, 6 * kRuns); |
| run_test(test_store_low_int, a, test_result_low_int[t]); |
| run_test(test_store_low_double, a, test_result_low_double[t]); |
| run_test(test_store_low_tagged, a, test_result_low_double[t]); |
| run_test(test_store_high_int, a, test_result_high_int[t]); |
| run_test(test_store_nan, a, test_result_nan[t]); |
| run_test(test_store_middle_double, a, test_result_middle[t]); |
| run_test(test_store_middle_tagged, a, test_result_middle[t]); |
| run_test(test_store_high_double, a, test_result_high_double[t]); |
| run_test(test_store_high_tagged, a, test_result_high_double[t]); |
| |
| // Test the correct behavior of the |length| property (which is read-only). |
| if (t != 0) { |
| assertEquals(kElementCount, a.length); |
| a.length = 2; |
| assertEquals(kElementCount, a.length); |
| assertTrue(delete a.length); |
| a.length = 2; |
| assertEquals(2, a.length); |
| |
| // Make sure bounds checks are handled correctly for external arrays. |
| run_bounds_test(a); |
| run_bounds_test(a); |
| run_bounds_test(a); |
| %OptimizeFunctionOnNextCall(run_bounds_test); |
| run_bounds_test(a); |
| %DeoptimizeFunction(run_bounds_test); |
| gc(); // Makes V8 forget about type information for test_func. |
| |
| } |
| |
| function array_load_set_smi_check(a) { |
| return a[0] = a[0] = 1; |
| } |
| |
| array_load_set_smi_check(a); |
| array_load_set_smi_check(0); |
| |
| function array_load_set_smi_check2(a) { |
| return a[0] = a[0] = 1; |
| } |
| |
| array_load_set_smi_check2(a); |
| %OptimizeFunctionOnNextCall(array_load_set_smi_check2); |
| array_load_set_smi_check2(a); |
| array_load_set_smi_check2(0); |
| %DeoptimizeFunction(array_load_set_smi_check2); |
| gc(); // Makes V8 forget about type information for array_load_set_smi_check. |
| } |
| |
| // Check handling of undefined in 32- and 64-bit external float arrays. |
| |
| function store_float32_undefined(ext_array) { |
| ext_array[0] = undefined; |
| } |
| |
| var float32_array = new Float32Array(1); |
| // Make sure runtime does it right |
| store_float32_undefined(float32_array); |
| assertTrue(isNaN(float32_array[0])); |
| // Make sure the ICs do it right |
| store_float32_undefined(float32_array); |
| assertTrue(isNaN(float32_array[0])); |
| // Make sure that Cranskshft does it right. |
| %OptimizeFunctionOnNextCall(store_float32_undefined); |
| store_float32_undefined(float32_array); |
| assertTrue(isNaN(float32_array[0])); |
| |
| function store_float64_undefined(ext_array) { |
| ext_array[0] = undefined; |
| } |
| |
| var float64_array = new Float64Array(1); |
| // Make sure runtime does it right |
| store_float64_undefined(float64_array); |
| assertTrue(isNaN(float64_array[0])); |
| // Make sure the ICs do it right |
| store_float64_undefined(float64_array); |
| assertTrue(isNaN(float64_array[0])); |
| // Make sure that Cranskshft does it right. |
| %OptimizeFunctionOnNextCall(store_float64_undefined); |
| store_float64_undefined(float64_array); |
| assertTrue(isNaN(float64_array[0])); |