#!/usr/bin/perl

# Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010 Apple Inc. All rights reserved.
# Copyright (C) 2006 Alexey Proskuryakov (ap@nypop.com)
# Copyright (C) 2007 Matt Lilek (pewtermoose@gmail.com)
# Copyright (C) 2007 Eric Seidel <eric@webkit.org>
# Copyright (C) 2009 Google Inc. All rights reserved.
# Copyright (C) 2009 Andras Becsi (becsi.andras@stud.u-szeged.hu), University of Szeged
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1.  Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer. 
# 2.  Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution. 
# 3.  Neither the name of Apple Computer, Inc. ("Apple") nor the names of
#     its contributors may be used to endorse or promote products derived
#     from this software without specific prior written permission. 
#
# THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# Script to run the WebKit Open Source Project layout tests.

# Run all the tests passed in on the command line.
# If no tests are passed, find all the .html, .shtml, .xml, .xhtml, .xhtmlmp, .pl, .php (and svg) files in the test directory.

# Run each text.
# Compare against the existing file xxx-expected.txt.
# If there is a mismatch, generate xxx-actual.txt and xxx-diffs.txt.

# At the end, report:
#   the number of tests that got the expected results
#   the number of tests that ran, but did not get the expected results
#   the number of tests that failed to run
#   the number of tests that were run but had no expected results to compare against

use strict;
use warnings;

use CGI;
use Config;
use Cwd;
use Data::Dumper;
use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
use File::Basename;
use File::Copy;
use File::Find;
use File::Path;
use File::Spec;
use File::Spec::Functions;
use File::Temp;
use FindBin;
use Getopt::Long;
use IPC::Open2;
use IPC::Open3;
use Time::HiRes qw(time usleep);

use List::Util 'shuffle';

use lib $FindBin::Bin;
use webkitperl::features;
use webkitperl::httpd;
use webkitdirs;
use VCSUtils;
use POSIX;

sub buildPlatformResultHierarchy();
sub buildPlatformTestHierarchy(@);
sub captureSavedCrashLog($$);
sub checkPythonVersion();
sub closeCygpaths();
sub closeDumpTool();
sub closeWebSocketServer();
sub configureAndOpenHTTPDIfNeeded();
sub countAndPrintLeaks($$$);
sub countFinishedTest($$$$);
sub deleteExpectedAndActualResults($);
sub dumpToolDidCrash();
sub epiloguesAndPrologues($$);
sub expectedDirectoryForTest($;$;$);
sub fileNameWithNumber($$);
sub findNewestFileMatchingGlob($);
sub htmlForResultsSection(\@$&);
sub isTextOnlyTest($);
sub launchWithEnv(\@\%);
sub resolveAndMakeTestResultsDirectory();
sub numericcmp($$);
sub openDiffTool();
sub buildDumpTool($);
sub openDumpTool();
sub parseLeaksandPrintUniqueLeaks();
sub openWebSocketServerIfNeeded();
sub pathcmp($$);
sub printFailureMessageForTest($$);
sub processIgnoreTests($$);
sub readFromDumpToolWithTimer(**);
sub readSkippedFiles($);
sub recordActualResultsAndDiff($$);
sub sampleDumpTool();
sub setFileHandleNonBlocking(*$);
sub setUpWindowsCrashLogSaving();
sub slowestcmp($$);
sub splitpath($);
sub stopRunningTestsEarlyIfNeeded();
sub stripExtension($);
sub stripMetrics($$);
sub testCrashedOrTimedOut($$$$$$);
sub toCygwinPath($);
sub toURL($);
sub toWindowsPath($);
sub validateSkippedArg($$;$);
sub writeToFile($$);

# Argument handling
my $addPlatformExceptions = 0;
my $complexText = 0;
my $exitAfterNFailures = 0;
my $exitAfterNCrashesOrTimeouts = 0;
my $generateNewResults = isAppleMacWebKit() ? 1 : 0;
my $guardMalloc = '';
# FIXME: Dynamic HTTP-port configuration in this file is wrong.  The various
# apache config files in LayoutTests/http/config govern the port numbers.
# Dynamic configuration as-written will also cause random failures in
# an IPv6 environment.  See https://bugs.webkit.org/show_bug.cgi?id=37104.
my $httpdPort = 8000;
my $httpdSSLPort = 8443;
my $ignoreMetrics = 0;
my $webSocketPort = 8880;
# wss is disabled until all platforms support pyOpenSSL.
# my $webSocketSecurePort = 9323;
my @ignoreTests;
my $iterations = 1;
my $launchSafari = 1;
my $mergeDepth;
my $pixelTests = '';
my $platform;
my $quiet = '';
my $randomizeTests = 0;
my $repeatEach = 1;
my $report10Slowest = 0;
my $resetResults = 0;
my $reverseTests = 0;
my $root;
my $runSample = 1;
my $shouldCheckLeaks = 0;
my $showHelp = 0;
my $stripEditingCallbacks;
my $testHTTP = 1;
my $testWebSocket = 1;
my $testMedia = 1;
my $tmpDir = "/tmp";
my $testResultsDirectory = File::Spec->catdir($tmpDir, "layout-test-results");
my $testsPerDumpTool = 1000;
my $threaded = 0;
# DumpRenderTree has an internal timeout of 30 seconds, so this must be > 30.
my $timeoutSeconds = 35;
my $tolerance = 0;
my $treatSkipped = "default";
my $useRemoteLinksToTests = 0;
my $useValgrind = 0;
my $verbose = 0;
my $shouldWaitForHTTPD = 0;
my $useWebKitTestRunner = 0;
my $noBuildDumpTool = 0;

my @leaksFilenames;

if (isWindows() || isMsys()) {
    print "This script has to be run under Cygwin to function correctly.\n";
    exit 1;
}

# Default to --no-http for wx for now.
$testHTTP = 0 if (isWx());

my $perlInterpreter = "perl";

my $expectedTag = "expected";
my $mismatchTag = "mismatch";
my $actualTag = "actual";
my $prettyDiffTag = "pretty-diff";
my $diffsTag = "diffs";
my $errorTag = "stderr";
my $crashLogTag = "crash-log";

my $windowsCrashLogFilePrefix = "CrashLog";

# These are defined here instead of closer to where they are used so that they
# will always be accessible from the END block that uses them, even if the user
# presses Ctrl-C before Perl has finished evaluating this whole file.
my $windowsPostMortemDebuggerKey = "/HKLM/SOFTWARE/Microsoft/Windows NT/CurrentVersion/AeDebug";
my %previousWindowsPostMortemDebuggerValues;

my $realPlatform;

my @macPlatforms = ("mac-tiger", "mac-leopard", "mac-snowleopard", "mac");
my @winPlatforms = ("win-xp", "win-vista", "win-7", "win");

if (isAppleMacWebKit()) {
    if (isTiger()) {
        $platform = "mac-tiger";
        $tolerance = 1.0;
    } elsif (isLeopard()) {
        $platform = "mac-leopard";
        $tolerance = 0.1;
    } elsif (isSnowLeopard()) {
        $platform = "mac-snowleopard";
        $tolerance = 0.1;
    } else {
        $platform = "mac";
    }
} elsif (isQt()) {
    if (isDarwin()) {
        $platform = "qt-mac";
    } elsif (isLinux()) {
        $platform = "qt-linux";
    } elsif (isWindows() || isCygwin()) {
        $platform = "qt-win";
    } else {
        $platform = "qt";
    }
} elsif (isGtk()) {
    $platform = "gtk";
} elsif (isWx()) {
    $platform = "wx";
} elsif (isCygwin() || isWindows()) {
    if (isWindowsXP()) {
        $platform = "win-xp";
    } elsif (isWindowsVista()) {
        $platform = "win-vista";
    } elsif (isWindows7()) {
        $platform = "win-7";
    } else {
        $platform = "win";
    }
}

if (isQt() || isAppleWinWebKit()) {
    my $testfontPath = $ENV{"WEBKIT_TESTFONTS"};
    if (!$testfontPath || !-d "$testfontPath") {
        print "The WEBKIT_TESTFONTS environment variable is not defined or not set properly\n";
        print "You must set it before running the tests.\n";
        print "Use git to grab the actual fonts from http://gitorious.org/qtwebkit/testfonts\n";
        exit 1;
    }
}

if (!defined($platform)) {
    print "WARNING: Your platform is not recognized. Any platform-specific results will be generated in platform/undefined.\n";
    $platform = "undefined";
}

if (!checkPythonVersion()) {
    print "WARNING: Your platform does not have Python 2.5+, which is required to run websocket server, so disabling websocket/tests.\n";
    $testWebSocket = 0;
}

my $programName = basename($0);
my $launchSafariDefault = $launchSafari ? "launch" : "do not launch";
my $httpDefault = $testHTTP ? "run" : "do not run";
my $sampleDefault = $runSample ? "run" : "do not run";

my $usage = <<EOF;
Usage: $programName [options] [testdir|testpath ...]
  --add-platform-exceptions       Put new results for non-platform-specific failing tests into the platform-specific results directory
  --complex-text                  Use the complex text code path for all text (Mac OS X and Windows only)
  -c|--configuration config       Set DumpRenderTree build configuration
  -g|--guard-malloc               Enable malloc guard
  --exit-after-n-failures N       Exit after the first N failures (includes crashes) instead of running all tests
  --exit-after-n-crashes-or-timeouts N
                                  Exit after the first N crashes instead of running all tests
  -h|--help                       Show this help message
  --[no-]http                     Run (or do not run) http tests (default: $httpDefault)
  --[no-]wait-for-httpd           Wait for httpd if some other test session is using it already (same as WEBKIT_WAIT_FOR_HTTPD=1). (default: $shouldWaitForHTTPD) 
  -i|--ignore-tests               Comma-separated list of directories or tests to ignore
  --iterations n                  Number of times to run the set of tests (e.g. ABCABCABC)
  --[no-]launch-safari            Launch (or do not launch) Safari to display test results (default: $launchSafariDefault)
  -l|--leaks                      Enable leaks checking
  --[no-]new-test-results         Generate results for new tests
  --nthly n                       Restart DumpRenderTree every n tests (default: $testsPerDumpTool)
  -p|--pixel-tests                Enable pixel tests
  --tolerance t                   Ignore image differences less than this percentage (default: $tolerance)
  --platform                      Override the detected platform to use for tests and results (default: $platform)
  --port                          Web server port to use with http tests
  -q|--quiet                      Less verbose output
  --reset-results                 Reset ALL results (including pixel tests if --pixel-tests is set)
  -o|--results-directory          Output results directory (default: $testResultsDirectory)
  --random                        Run the tests in a random order
  --repeat-each n                 Number of times to run each test (e.g. AAABBBCCC)
  --reverse                       Run the tests in reverse alphabetical order
  --root                          Path to root tools build
  --[no-]sample-on-timeout        Run sample on timeout (default: $sampleDefault) (Mac OS X only)
  -1|--singly                     Isolate each test case run (implies --nthly 1 --verbose)
  --skipped=[default|ignore|only] Specifies how to treat the Skipped file
                                     default: Tests/directories listed in the Skipped file are not tested
                                     ignore:  The Skipped file is ignored
                                     only:    Only those tests/directories listed in the Skipped file will be run
  --slowest                       Report the 10 slowest tests
  --ignore-metrics                Ignore metrics in tests
  --[no-]strip-editing-callbacks  Remove editing callbacks from expected results
  -t|--threaded                   Run a concurrent JavaScript thead with each test
  --timeout t                     Sets the number of seconds before a test times out (default: $timeoutSeconds)
  --valgrind                      Run DumpRenderTree inside valgrind (Qt/Linux only)
  -v|--verbose                    More verbose output (overrides --quiet)
  -m|--merge-leak-depth arg       Merges leak callStacks and prints the number of unique leaks beneath a callstack depth of arg.  Defaults to 5.
  --use-remote-links-to-tests     Link to test files within the SVN repository in the results.
  -2|--webkit-test-runner         Use WebKitTestRunner rather than DumpRenderTree.
EOF

setConfiguration();

my $getOptionsResult = GetOptions(
    'add-platform-exceptions' => \$addPlatformExceptions,
    'complex-text' => \$complexText,
    'exit-after-n-failures=i' => \$exitAfterNFailures,
    'exit-after-n-crashes-or-timeouts=i' => \$exitAfterNCrashesOrTimeouts,
    'guard-malloc|g' => \$guardMalloc,
    'help|h' => \$showHelp,
    'http!' => \$testHTTP,
    'wait-for-httpd!' => \$shouldWaitForHTTPD,
    'ignore-metrics!' => \$ignoreMetrics,
    'ignore-tests|i=s' => \@ignoreTests,
    'iterations=i' => \$iterations,
    'launch-safari!' => \$launchSafari,
    'leaks|l' => \$shouldCheckLeaks,
    'merge-leak-depth|m:5' => \$mergeDepth,
    'new-test-results!' => \$generateNewResults,
    'no-build' => \$noBuildDumpTool,
    'nthly=i' => \$testsPerDumpTool,
    'pixel-tests|p' => \$pixelTests,
    'platform=s' => \$platform,
    'port=i' => \$httpdPort,
    'quiet|q' => \$quiet,
    'random' => \$randomizeTests,
    'repeat-each=i' => \$repeatEach,
    'reset-results' => \$resetResults,
    'results-directory|o=s' => \$testResultsDirectory,
    'reverse' => \$reverseTests,
    'root=s' => \$root,
    'sample-on-timeout!' => \$runSample,
    'singly|1' => sub { $testsPerDumpTool = 1; },
    'skipped=s' => \&validateSkippedArg,
    'slowest' => \$report10Slowest,
    'strip-editing-callbacks!' => \$stripEditingCallbacks,
    'threaded|t' => \$threaded,
    'timeout=i' => \$timeoutSeconds,
    'tolerance=f' => \$tolerance,
    'use-remote-links-to-tests' => \$useRemoteLinksToTests,
    'valgrind' => \$useValgrind,
    'verbose|v' => \$verbose,
    'webkit-test-runner|2' => \$useWebKitTestRunner,
);

if (!$getOptionsResult || $showHelp) {
    print STDERR $usage;
    exit 1;
}

if ($useWebKitTestRunner) {
    if (isAppleMacWebKit()) {
        $realPlatform = $platform;
        $platform = "mac-wk2";
    } elsif (isAppleWinWebKit()) {
        $stripEditingCallbacks = 0 unless defined $stripEditingCallbacks;
        $realPlatform = $platform;
        $platform = "win-wk2";
    } elsif (isQt()) {
        $realPlatform = $platform;
        $platform = "qt-wk2";
    }
}

$timeoutSeconds *= 10 if $guardMalloc;

$stripEditingCallbacks = isCygwin() unless defined $stripEditingCallbacks;

my $ignoreSkipped = $treatSkipped eq "ignore";
my $skippedOnly = $treatSkipped eq "only";

my $configuration = configuration();

# We need an environment variable to be able to enable the feature per-slave
$shouldWaitForHTTPD = $ENV{"WEBKIT_WAIT_FOR_HTTPD"} unless ($shouldWaitForHTTPD);
$verbose = 1 if $testsPerDumpTool == 1;

if ($shouldCheckLeaks && $testsPerDumpTool > 1000) {
    print STDERR "\nWARNING: Running more than 1000 tests at a time with MallocStackLogging enabled may cause a crash.\n\n";
}

# Stack logging does not play well with QuickTime on Tiger (rdar://problem/5537157)
$testMedia = 0 if $shouldCheckLeaks && isTiger();

# Generating remote links causes a lot of unnecessary spew on GTK build bot
$useRemoteLinksToTests = 0 if isGtk();

setConfigurationProductDir(Cwd::abs_path($root)) if (defined($root));
my $productDir = productDir();
$productDir .= "/bin" if isQt();
$productDir .= "/Programs" if isGtk();

chdirWebKit();

if (!defined($root) && !$noBuildDumpTool) {
    # FIXME: We build both DumpRenderTree and WebKitTestRunner for
    # WebKitTestRunner runs becuase DumpRenderTree still includes
    # the DumpRenderTreeSupport module and the TestNetscapePlugin.
    # These two projects should be factored out into their own
    # projects.
    buildDumpTool("DumpRenderTree");
    buildDumpTool("WebKitTestRunner") if $useWebKitTestRunner;
}

my $dumpToolName = $useWebKitTestRunner ? "WebKitTestRunner" : "DumpRenderTree";

if (isAppleWinWebKit()) {
    $dumpToolName .= "_debug" if configurationForVisualStudio() eq "Debug_All";
    $dumpToolName .= $Config{_exe};
}
my $dumpTool = File::Spec->catfile($productDir, $dumpToolName);
die "can't find executable $dumpToolName (looked in $productDir)\n" unless -x $dumpTool;

my $imageDiffTool = "$productDir/ImageDiff";
$imageDiffTool .= "_debug" if isCygwin() && configurationForVisualStudio() eq "Debug_All";
die "can't find executable $imageDiffTool (looked in $productDir)\n" if $pixelTests && !-x $imageDiffTool;

checkFrameworks() unless isCygwin();

if (isAppleMacWebKit()) {
    push @INC, $productDir;
    require DumpRenderTreeSupport;
}

my $layoutTestsName = "LayoutTests";
my $testDirectory = File::Spec->rel2abs($layoutTestsName);
my $expectedDirectory = $testDirectory;
my $platformBaseDirectory = catdir($testDirectory, "platform");
my $platformTestDirectory = catdir($platformBaseDirectory, $platform);
my @platformResultHierarchy = buildPlatformResultHierarchy();
my @platformTestHierarchy = buildPlatformTestHierarchy(@platformResultHierarchy);

$expectedDirectory = $ENV{"WebKitExpectedTestResultsDirectory"} if $ENV{"WebKitExpectedTestResultsDirectory"};

$testResultsDirectory = File::Spec->rel2abs($testResultsDirectory);
# $testResultsDirectory must be empty before testing.
rmtree $testResultsDirectory;
my $testResults = File::Spec->catfile($testResultsDirectory, "results.html");

if (isAppleMacWebKit()) {
    print STDERR "Compiling Java tests\n";
    my $javaTestsDirectory = catdir($testDirectory, "java");

    if (system("/usr/bin/make", "-C", "$javaTestsDirectory")) {
        exit 1;
    }
} elsif (isCygwin()) {
    setUpWindowsCrashLogSaving();
}

print "Running tests from $testDirectory\n";
if ($pixelTests) {
    print "Enabling pixel tests with a tolerance of $tolerance%\n";
    if (isDarwin()) {
        if (!$useWebKitTestRunner) {
            print "WARNING: Temporarily changing the main display color profile:\n";
            print "\tThe colors on your screen will change for the duration of the testing.\n";
            print "\tThis allows the pixel tests to have consistent color values across all machines.\n";
        }

        if (isPerianInstalled()) {
            print "WARNING: Perian's QuickTime component is installed and this may affect pixel test results!\n";
            print "\tYou should avoid generating new pixel results in this environment.\n";
            print "\tSee https://bugs.webkit.org/show_bug.cgi?id=22615 for details.\n";
        }
    }
}

system "ln", "-s", $testDirectory, "/tmp/LayoutTests" unless -x "/tmp/LayoutTests";

my %ignoredFiles = ( "results.html" => 1 );
my %ignoredDirectories = map { $_ => 1 } qw(platform);
my %ignoredLocalDirectories = map { $_ => 1 } qw(.svn _svn resources script-tests);
my %supportedFileExtensions = map { $_ => 1 } qw(html shtml xml xhtml xhtmlmp pl php);

if (!checkWebCoreFeatureSupport("MathML", 0)) {
    $ignoredDirectories{'mathml'} = 1;
}

# FIXME: We should fix webkitperl/features.pm:hasFeature() to do the correct feature detection for Cygwin.
if (checkWebCoreFeatureSupport("SVG", 0)) {
    $supportedFileExtensions{'svg'} = 1;
} elsif (isCygwin()) {
    $supportedFileExtensions{'svg'} = 1;
} else {
    $ignoredLocalDirectories{'svg'} = 1;
}

if (!$testHTTP) {
    $ignoredDirectories{'http'} = 1;
    $ignoredDirectories{'websocket'} = 1;
}
if (!$testWebSocket) {
    $ignoredDirectories{'websocket'} = 1;
}

if (!$testMedia) {
    $ignoredDirectories{'media'} = 1;
    $ignoredDirectories{'http/tests/media'} = 1;
}

my $supportedFeaturesResult = "";

if (isCygwin()) {
    # Collect supported features list
    setPathForRunningWebKitApp(\%ENV);
    my $supportedFeaturesCommand = "\"$dumpTool\" --print-supported-features 2>&1";
    $supportedFeaturesResult = `$supportedFeaturesCommand 2>&1`;
}

my $hasAcceleratedCompositing = 0;
my $has3DRendering = 0;

if (isCygwin()) {
    $hasAcceleratedCompositing = $supportedFeaturesResult =~ /AcceleratedCompositing/;
    $has3DRendering = $supportedFeaturesResult =~ /3DRendering/;
} else {
    $hasAcceleratedCompositing = checkWebCoreFeatureSupport("Accelerated Compositing", 0);
    $has3DRendering = checkWebCoreFeatureSupport("3D Rendering", 0);
}

if (!$hasAcceleratedCompositing) {
    $ignoredDirectories{'compositing'} = 1;

    # This test has slightly different floating-point rounding when accelerated
    # compositing is enabled.
    $ignoredFiles{'svg/custom/use-on-symbol-inside-pattern.svg'} = 1;

    # This test has an iframe that is put in a layer only in compositing mode.
    $ignoredFiles{'media/media-document-audio-repaint.html'} = 1;

    if (isAppleWebKit()) {
        # In Apple's ports, the default controls for <video> contain a "full
        # screen" button only if accelerated compositing is enabled.
        $ignoredFiles{'media/controls-after-reload.html'} = 1;
        $ignoredFiles{'media/controls-drag-timebar.html'} = 1;
        $ignoredFiles{'media/controls-strict.html'} = 1;
        $ignoredFiles{'media/controls-styling.html'} = 1;
        $ignoredFiles{'media/video-controls-rendering.html'} = 1;
        $ignoredFiles{'media/video-display-toggle.html'} = 1;
        $ignoredFiles{'media/video-no-audio.html'} = 1;
    }

    # Here we're using !$hasAcceleratedCompositing as a proxy for "is a headless XP machine" (like
    # our test slaves). Headless XP machines can neither support accelerated compositing nor pass
    # this test, so skipping the test here is expedient, if a little sloppy. See
    # <http://webkit.org/b/48333>.
    $ignoredFiles{'platform/win/plugins/npn-invalidate-rect-invalidates-window.html'} = 1 if isAppleWinWebKit();
}

if (!$has3DRendering) {
    $ignoredDirectories{'animations/3d'} = 1;
    $ignoredDirectories{'transforms/3d'} = 1;

    # These tests use the -webkit-transform-3d media query.
    $ignoredFiles{'fast/media/mq-transform-02.html'} = 1;
    $ignoredFiles{'fast/media/mq-transform-03.html'} = 1;
}

if (!checkWebCoreFeatureSupport("3D Canvas", 0)) {
    $ignoredDirectories{'fast/canvas/webgl'} = 1;
    $ignoredDirectories{'compositing/webgl'} = 1;
    $ignoredDirectories{'http/tests/canvas/webgl'} = 1;
}

if (checkWebCoreFeatureSupport("WML", 0)) {
    $supportedFileExtensions{'wml'} = 1;
} else {
    $ignoredDirectories{'http/tests/wml'} = 1;
    $ignoredDirectories{'fast/wml'} = 1;
    $ignoredDirectories{'wml'} = 1;
}

if (!checkWebCoreFeatureSupport("WCSS", 0)) {
    $ignoredDirectories{'fast/wcss'} = 1;
}

if (!checkWebCoreFeatureSupport("XHTMLMP", 0)) {
    $ignoredDirectories{'fast/xhtmlmp'} = 1;
}

processIgnoreTests(join(',', @ignoreTests), "ignore-tests") if @ignoreTests;
if (!$ignoreSkipped) {
    if (!$skippedOnly || @ARGV == 0) {
        readSkippedFiles("");
    } else {
        # Since readSkippedFiles() appends to @ARGV, we must use a foreach
        # loop so that we only iterate over the original argument list.
        foreach my $argnum (0 .. $#ARGV) {
            readSkippedFiles(shift @ARGV);
        }
    }
}

my @tests = findTestsToRun();

die "no tests to run\n" if !@tests;

my %counts;
my %tests;
my %imagesPresent;
my %imageDifferences;
my %durations;
my $count = 0;
my $leaksOutputFileNumber = 1;
my $totalLeaks = 0;

my @toolArgs = ();
push @toolArgs, "--pixel-tests" if $pixelTests;
push @toolArgs, "--threaded" if $threaded;
push @toolArgs, "--complex-text" if $complexText;
push @toolArgs, "-";

my @diffToolArgs = ();
push @diffToolArgs, "--tolerance", $tolerance;

$| = 1;

my $dumpToolPID;
my $isDumpToolOpen = 0;
my $dumpToolCrashed = 0;
my $imageDiffToolPID;
my $isDiffToolOpen = 0;

my $atLineStart = 1;
my $lastDirectory = "";

my $isHttpdOpen = 0;
my $isWebSocketServerOpen = 0;
my $webSocketServerPidFile = 0;
my $failedToStartWebSocketServer = 0;
# wss is disabled until all platforms support pyOpenSSL.
# my $webSocketSecureServerPID = 0;

sub catch_pipe { $dumpToolCrashed = 1; }
$SIG{"PIPE"} = "catch_pipe";

print "Testing ", scalar @tests, " test cases";
print " $iterations times" if ($iterations > 1);
print ", repeating each test $repeatEach times" if ($repeatEach > 1);
print ".\n";

my $overallStartTime = time;

my %expectedResultPaths;

my @originalTests = @tests;
# Add individual test repetitions
if ($repeatEach > 1) {
    @tests = ();
    foreach my $test (@originalTests) {
        for (my $i = 0; $i < $repeatEach; $i++) {
            push(@tests, $test);
        }
    }
}
# Add test set repetitions
for (my $i = 1; $i < $iterations; $i++) {
    push(@tests, @originalTests);
}

for my $test (@tests) {
    my $newDumpTool = not $isDumpToolOpen;
    openDumpTool();

    my $base = stripExtension($test);
    my $expectedExtension = ".txt";
    
    my $dir = $base;
    $dir =~ s|/[^/]+$||;

    if ($newDumpTool || $dir ne $lastDirectory) {
        foreach my $logue (epiloguesAndPrologues($newDumpTool ? "" : $lastDirectory, $dir)) {
            if (isCygwin()) {
                $logue = toWindowsPath($logue);
            } else {
                $logue = canonpath($logue);
            }
            if ($verbose) {
                print "running epilogue or prologue $logue\n";
            }
            print OUT "$logue\n";
            # Throw away output from DumpRenderTree.
            # Once for the test output and once for pixel results (empty)
            while (<IN>) {
                last if /#EOF/;
            }
            while (<IN>) {
                last if /#EOF/;
            }
        }
    }

    if ($verbose) {
        print "running $test -> ";
        $atLineStart = 0;
    } elsif (!$quiet) {
        if ($dir ne $lastDirectory) {
            print "\n" unless $atLineStart;
            print "$dir ";
        }
        print ".";
        $atLineStart = 0;
    }

    $lastDirectory = $dir;

    my $result;

    my $startTime = time if $report10Slowest;

    # Try to read expected hash file for pixel tests
    my $suffixExpectedHash = "";
    if ($pixelTests && !$resetResults) {
        my $expectedPixelDir = expectedDirectoryForTest($base, 0, "png");
        if (open EXPECTEDHASH, File::Spec->catfile($expectedPixelDir, "$base-$expectedTag.checksum")) {
            my $expectedHash = <EXPECTEDHASH>;
            chomp($expectedHash);
            close EXPECTEDHASH;
            
            # Format expected hash into a suffix string that is appended to the path / URL passed to DRT
            $suffixExpectedHash = "'$expectedHash";
        }
    }

    if ($test =~ /^http\//) {
        configureAndOpenHTTPDIfNeeded();
        if ($test =~ /^http\/tests\/websocket\//) {
            if ($test =~ /^websocket\/tests\/local\//) {
                my $testPath = "$testDirectory/$test";
                if (isCygwin()) {
                    $testPath = toWindowsPath($testPath);
                } else {
                    $testPath = canonpath($testPath);
                }
                print OUT "$testPath\n";
            } else {
                if (openWebSocketServerIfNeeded()) {
                    my $path = canonpath($test);
                    if ($test =~ /^http\/tests\/websocket\/tests\/ssl\//) {
                        # wss is disabled until all platforms support pyOpenSSL.
                        print STDERR "Error: wss is disabled until all platforms support pyOpenSSL.";
                    } else {
                        $path =~ s/^http\/tests\///;
                        print OUT "http://127.0.0.1:$httpdPort/$path\n";
                    }
                } else {
                    # We failed to launch the WebSocket server.  Display a useful error message rather than attempting
                    # to run tests that expect the server to be available.
                    my $errorMessagePath = "$testDirectory/http/tests/websocket/resources/server-failed-to-start.html";
                    $errorMessagePath = isCygwin() ? toWindowsPath($errorMessagePath) : canonpath($errorMessagePath);
                    print OUT "$errorMessagePath\n";
                }
            }
        } elsif ($test !~ /^http\/tests\/local\// && $test !~ /^http\/tests\/ssl\// && $test !~ /^http\/tests\/wml\//) {
            my $path = canonpath($test);
            $path =~ s/^http\/tests\///;
            print OUT "http://127.0.0.1:$httpdPort/$path$suffixExpectedHash\n";
        } elsif ($test =~ /^http\/tests\/ssl\//) {
            my $path = canonpath($test);
            $path =~ s/^http\/tests\///;
            print OUT "https://127.0.0.1:$httpdSSLPort/$path$suffixExpectedHash\n";
        } else {
            my $testPath = "$testDirectory/$test";
            if (isCygwin()) {
                $testPath = toWindowsPath($testPath);
            } else {
                $testPath = canonpath($testPath);
            }
            print OUT "$testPath$suffixExpectedHash\n";
        }
    } else {
        my $testPath = "$testDirectory/$test";
        if (isCygwin()) {
            $testPath = toWindowsPath($testPath);
        } else {
            $testPath = canonpath($testPath);
        }
        print OUT "$testPath$suffixExpectedHash\n" if defined $testPath;
    }

    # DumpRenderTree is expected to dump two "blocks" to stdout for each test.
    # Each block is terminated by a #EOF on a line by itself.
    # The first block is the output of the test (in text, RenderTree or other formats).
    # The second block is for optional pixel data in PNG format, and may be empty if
    # pixel tests are not being run, or the test does not dump pixels (e.g. text tests).
    my $readResults = readFromDumpToolWithTimer(IN, ERROR);

    my $actual = $readResults->{output};
    my $error = $readResults->{error};

    $expectedExtension = $readResults->{extension};
    my $expectedFileName = "$base-$expectedTag.$expectedExtension";

    my $isText = isTextOnlyTest($actual);

    my $expectedDir = expectedDirectoryForTest($base, $isText, $expectedExtension);
    $expectedResultPaths{$base} = File::Spec->catfile($expectedDir, $expectedFileName);

    unless ($readResults->{status} eq "success") {
        my $crashed = $readResults->{status} eq "crashed";
        my $webProcessCrashed = $readResults->{status} eq "webProcessCrashed";
        testCrashedOrTimedOut($test, $base, $crashed, $webProcessCrashed, $actual, $error);
        countFinishedTest($test, $base, $webProcessCrashed ? "webProcessCrash" : $crashed ? "crash" : "timedout", 0);
        last if stopRunningTestsEarlyIfNeeded();
        next;
    }

    $durations{$test} = time - $startTime if $report10Slowest;

    my $expected;

    if (!$resetResults && open EXPECTED, "<", $expectedResultPaths{$base}) {
        $expected = "";
        while (<EXPECTED>) {
            next if $stripEditingCallbacks && $_ =~ /^EDITING DELEGATE:/;
            $expected .= $_;
        }
        close EXPECTED;
    }

    if ($ignoreMetrics && !$isText && defined $expected) {
        ($actual, $expected) = stripMetrics($actual, $expected);
    }

    if ($shouldCheckLeaks && $testsPerDumpTool == 1) {
        print "        $test -> ";
    }

    my $actualPNG = "";
    my $diffPNG = "";
    my $diffPercentage = 0;
    my $diffResult = "passed";

    my $actualHash = "";
    my $expectedHash = "";
    my $actualPNGSize = 0;

    while (<IN>) {
        last if /#EOF/;
        if (/ActualHash: ([a-f0-9]{32})/) {
            $actualHash = $1;
        } elsif (/ExpectedHash: ([a-f0-9]{32})/) {
            $expectedHash = $1;
        } elsif (/Content-Length: (\d+)\s*/) {
            $actualPNGSize = $1;
            read(IN, $actualPNG, $actualPNGSize);
        }
    }

    if ($verbose && $pixelTests && !$resetResults && $actualPNGSize) {
        if ($actualHash eq "" && $expectedHash eq "") {
            printFailureMessageForTest($test, "WARNING: actual & expected pixel hashes are missing!");
        } elsif ($actualHash eq "") {
            printFailureMessageForTest($test, "WARNING: actual pixel hash is missing!");
        } elsif ($expectedHash eq "") {
            printFailureMessageForTest($test, "WARNING: expected pixel hash is missing!");
        }
    }

    if ($actualPNGSize > 0) {
        my $expectedPixelDir = expectedDirectoryForTest($base, 0, "png");
        my $expectedPNGPath = File::Spec->catfile($expectedPixelDir, "$base-$expectedTag.png");

        if (!$resetResults && ($expectedHash ne $actualHash || ($actualHash eq "" && $expectedHash eq ""))) {
            if (-f $expectedPNGPath) {
                my $expectedPNGSize = -s $expectedPNGPath;
                my $expectedPNG = "";
                open EXPECTEDPNG, $expectedPNGPath;
                read(EXPECTEDPNG, $expectedPNG, $expectedPNGSize);

                openDiffTool();
                print DIFFOUT "Content-Length: $actualPNGSize\n";
                print DIFFOUT $actualPNG;

                print DIFFOUT "Content-Length: $expectedPNGSize\n";
                print DIFFOUT $expectedPNG;

                while (<DIFFIN>) {
                    last if /^error/ || /^diff:/;
                    if (/Content-Length: (\d+)\s*/) {
                        read(DIFFIN, $diffPNG, $1);
                    }
                }

                if (/^diff: (.+)% (passed|failed)/) {
                    $diffPercentage = $1 + 0;
                    $imageDifferences{$base} = $diffPercentage;
                    $diffResult = $2;
                }
                
                if (!$diffPercentage) {
                    printFailureMessageForTest($test, "pixel hash failed (but pixel test still passes)");
                }
            } elsif ($verbose) {
                printFailureMessageForTest($test, "WARNING: expected image is missing!");
            }
        }

        if ($resetResults || !-f $expectedPNGPath) {
            mkpath catfile($expectedPixelDir, dirname($base)) if $testDirectory ne $expectedPixelDir;
            writeToFile($expectedPNGPath, $actualPNG);
        }

        my $expectedChecksumPath = File::Spec->catfile($expectedPixelDir, "$base-$expectedTag.checksum");
        if ($actualHash ne "" && ($resetResults || !-f $expectedChecksumPath)) {
            writeToFile($expectedChecksumPath, $actualHash);
        }
    }

    if (dumpToolDidCrash()) {
        $result = "crash";
        testCrashedOrTimedOut($test, $base, 1, 0, $actual, $error);
    } elsif (!defined $expected) {
        if ($verbose) {
            print "new " . ($resetResults ? "result" : "test");
        }
        $result = "new";

        if ($generateNewResults || $resetResults) {
            mkpath catfile($expectedDir, dirname($base)) if $testDirectory ne $expectedDir;
            writeToFile("$expectedDir/$expectedFileName", $actual);
        }
        deleteExpectedAndActualResults($base);
        recordActualResultsAndDiff($base, $actual);
        if (!$resetResults) {
            # Always print the file name for new tests, as they will probably need some manual inspection.
            # in verbose mode we already printed the test case, so no need to do it again.
            unless ($verbose) {
                print "\n" unless $atLineStart;
                print "$test -> ";
            }
            my $resultsDir = catdir($expectedDir, dirname($base));
            if (!$verbose) {
                print "new";
            }
            if ($generateNewResults) {
                print " (results generated in $resultsDir)";
            }
            print "\n" unless $atLineStart;
            $atLineStart = 1;
        }
    } elsif ($actual eq $expected && $diffResult eq "passed") {
        if ($verbose) {
            print "succeeded\n";
            $atLineStart = 1;
        }
        $result = "match";
        deleteExpectedAndActualResults($base);
    } else {
        $result = "mismatch";

        my $pixelTestFailed = $pixelTests && $diffPNG && $diffPNG ne "";
        my $testFailed = $actual ne $expected;

        my $message = !$testFailed ? "pixel test failed" : "failed";

        if (($testFailed || $pixelTestFailed) && $addPlatformExceptions) {
            my $testBase = catfile($testDirectory, $base);
            my $expectedBase = catfile($expectedDir, $base);
            my $testIsMaximallyPlatformSpecific = $testBase =~ m|^\Q$platformTestDirectory\E/|;
            my $expectedResultIsMaximallyPlatformSpecific = $expectedBase =~ m|^\Q$platformTestDirectory\E/|;
            if (!$testIsMaximallyPlatformSpecific && !$expectedResultIsMaximallyPlatformSpecific) {
                mkpath catfile($platformTestDirectory, dirname($base));
                if ($testFailed) {
                    my $expectedFile = catfile($platformTestDirectory, "$expectedFileName");
                    writeToFile("$expectedFile", $actual);
                }
                if ($pixelTestFailed) {
                    my $expectedFile = catfile($platformTestDirectory, "$base-$expectedTag.checksum");
                    writeToFile("$expectedFile", $actualHash);

                    $expectedFile = catfile($platformTestDirectory, "$base-$expectedTag.png");
                    writeToFile("$expectedFile", $actualPNG);
                }
                $message .= " (results generated in $platformTestDirectory)";
            }
        }

        printFailureMessageForTest($test, $message);

        my $dir = "$testResultsDirectory/$base";
        $dir =~ s|/([^/]+)$|| or die "Failed to find test name from base\n";
        my $testName = $1;
        mkpath $dir;

        deleteExpectedAndActualResults($base);
        recordActualResultsAndDiff($base, $actual);

        if ($pixelTestFailed) {
            $imagesPresent{$base} = 1;

            writeToFile("$testResultsDirectory/$base-$actualTag.png", $actualPNG);
            writeToFile("$testResultsDirectory/$base-$diffsTag.png", $diffPNG);

            my $expectedPixelDir = expectedDirectoryForTest($base, 0, "png");
            copy("$expectedPixelDir/$base-$expectedTag.png", "$testResultsDirectory/$base-$expectedTag.png");

            open DIFFHTML, ">$testResultsDirectory/$base-$diffsTag.html" or die;
            print DIFFHTML "<html>\n";
            print DIFFHTML "<head>\n";
            print DIFFHTML "<title>$base Image Compare</title>\n";
            print DIFFHTML "<script language=\"Javascript\" type=\"text/javascript\">\n";
            print DIFFHTML "var currentImage = 0;\n";
            print DIFFHTML "var imageNames = new Array(\"Actual\", \"Expected\");\n";
            print DIFFHTML "var imagePaths = new Array(\"$testName-$actualTag.png\", \"$testName-$expectedTag.png\");\n";
            if (-f "$testDirectory/$base-w3c.png") {
                copy("$testDirectory/$base-w3c.png", "$testResultsDirectory/$base-w3c.png");
                print DIFFHTML "imageNames.push(\"W3C\");\n";
                print DIFFHTML "imagePaths.push(\"$testName-w3c.png\");\n";
            }
            print DIFFHTML "function animateImage() {\n";
            print DIFFHTML "    var image = document.getElementById(\"animatedImage\");\n";
            print DIFFHTML "    var imageText = document.getElementById(\"imageText\");\n";
            print DIFFHTML "    image.src = imagePaths[currentImage];\n";
            print DIFFHTML "    imageText.innerHTML = imageNames[currentImage] + \" Image\";\n";
            print DIFFHTML "    currentImage = (currentImage + 1) % imageNames.length;\n";
            print DIFFHTML "    setTimeout('animateImage()',2000);\n";
            print DIFFHTML "}\n";
            print DIFFHTML "</script>\n";
            print DIFFHTML "</head>\n";
            print DIFFHTML "<body onLoad=\"animateImage();\">\n";
            print DIFFHTML "<table>\n";
            if ($diffPercentage) {
                print DIFFHTML "<tr>\n";
                print DIFFHTML "<td>Difference between images: <a href=\"$testName-$diffsTag.png\">$diffPercentage%</a></td>\n";
                print DIFFHTML "</tr>\n";
            }
            print DIFFHTML "<tr>\n";
            print DIFFHTML "<td><a href=\"" . toURL("$testDirectory/$test") . "\">test file</a></td>\n";
            print DIFFHTML "</tr>\n";
            print DIFFHTML "<tr>\n";
            print DIFFHTML "<td id=\"imageText\" style=\"text-weight: bold;\">Actual Image</td>\n";
            print DIFFHTML "</tr>\n";
            print DIFFHTML "<tr>\n";
            print DIFFHTML "<td><img src=\"$testName-$actualTag.png\" id=\"animatedImage\"></td>\n";
            print DIFFHTML "</tr>\n";
            print DIFFHTML "</table>\n";
            print DIFFHTML "</body>\n";
            print DIFFHTML "</html>\n";
        }
    }

    if ($error) {
        my $dir = dirname(File::Spec->catdir($testResultsDirectory, $base));
        mkpath $dir;
        
        writeToFile(File::Spec->catfile($testResultsDirectory, "$base-$errorTag.txt"), $error);
        
        $counts{error}++;
        push @{$tests{error}}, $test;
    }

    countFinishedTest($test, $base, $result, $isText);
    last if stopRunningTestsEarlyIfNeeded();
}

my $totalTestingTime = time - $overallStartTime;
my $waitTime = getWaitTime();
if ($waitTime > 0.1) {
    my $normalizedTestingTime = $totalTestingTime - $waitTime;
    printf "\n%0.2fs HTTPD waiting time\n", $waitTime . "";
    printf "%0.2fs normalized testing time", $normalizedTestingTime . "";
}
printf "\n%0.2fs total testing time\n", $totalTestingTime . "";

!$isDumpToolOpen || die "Failed to close $dumpToolName.\n";

$isHttpdOpen = !closeHTTPD();
closeWebSocketServer();

# Because multiple instances of this script are running concurrently we cannot 
# safely delete this symlink.
# system "rm /tmp/LayoutTests";

# FIXME: Do we really want to check the image-comparison tool for leaks every time?
if ($isDiffToolOpen && $shouldCheckLeaks) {
    $totalLeaks += countAndPrintLeaks("ImageDiff", $imageDiffToolPID, "$testResultsDirectory/ImageDiff-leaks.txt");
}

if ($totalLeaks) {
    if ($mergeDepth) {
        parseLeaksandPrintUniqueLeaks();
    } else { 
        print "\nWARNING: $totalLeaks total leaks found!\n";
        print "See above for individual leaks results.\n" if ($leaksOutputFileNumber > 2);
    }
}

close IN;
close OUT;
close ERROR;

if ($report10Slowest) {
    print "\n\nThe 10 slowest tests:\n\n";
    my $count = 0;
    for my $test (sort slowestcmp keys %durations) {
        printf "%0.2f secs: %s\n", $durations{$test}, $test;
        last if ++$count == 10;
    }
}

print "\n";

if ($skippedOnly && $counts{"match"}) {
    print "The following tests are in the Skipped file (" . File::Spec->abs2rel("$platformTestDirectory/Skipped", $testDirectory) . "), but succeeded:\n";
    foreach my $test (@{$tests{"match"}}) {
        print "  $test\n";
    }
}

if ($resetResults || ($counts{match} && $counts{match} == $count)) {
    print "all $count test cases succeeded\n";
    unlink $testResults;
    exit;
}

printResults();

mkpath $testResultsDirectory;

open HTML, ">", $testResults or die "Failed to open $testResults. $!";
print HTML "<html>\n";
print HTML "<head>\n";
print HTML "<title>Layout Test Results</title>\n";
print HTML "</head>\n";
print HTML "<body>\n";

if ($ignoreMetrics) {
    print HTML "<h4>Tested with metrics ignored.</h4>";
}

print HTML htmlForResultsSection(@{$tests{mismatch}}, "Tests where results did not match expected results", \&linksForMismatchTest);
print HTML htmlForResultsSection(@{$tests{timedout}}, "Tests that timed out", \&linksForErrorTest);
print HTML htmlForResultsSection(@{$tests{crash}}, "Tests that caused the DumpRenderTree tool to crash", \&linksForErrorTest);
print HTML htmlForResultsSection(@{$tests{webProcessCrash}}, "Tests that caused the Web process to crash", \&linksForErrorTest);
print HTML htmlForResultsSection(@{$tests{error}}, "Tests that had stderr output", \&linksForErrorTest);
print HTML htmlForResultsSection(@{$tests{new}}, "Tests that had no expected results (probably new)", \&linksForNewTest);

print HTML "</body>\n";
print HTML "</html>\n";
close HTML;

my @configurationArgs = argumentsForConfiguration();

if (isGtk()) {
  system "Tools/Scripts/run-launcher", @configurationArgs, "file://".$testResults if $launchSafari;
} elsif (isQt()) {
  unshift @configurationArgs, qw(-graphicssystem raster -style windows);
  if (isCygwin()) {
    $testResults = "/" . toWindowsPath($testResults);
    $testResults =~ s/\\/\//g;
  }
  push(@configurationArgs, '-2') if $useWebKitTestRunner;
  system "Tools/Scripts/run-launcher", @configurationArgs, "file://".$testResults if $launchSafari;
} elsif (isCygwin()) {
  system "cygstart", $testResults if $launchSafari;
} elsif (isWindows()) {
  system "start", $testResults if $launchSafari;
} else {
  system "Tools/Scripts/run-safari", @configurationArgs, "-NSOpen", $testResults if $launchSafari;
}

closeCygpaths() if isCygwin();

exit 1;

sub countAndPrintLeaks($$$)
{
    my ($dumpToolName, $dumpToolPID, $leaksFilePath) = @_;

    print "\n" unless $atLineStart;
    $atLineStart = 1;

    # We are excluding the following reported leaks so they don't get in our way when looking for WebKit leaks:
    # This allows us ignore known leaks and only be alerted when new leaks occur. Some leaks are in the old
    # versions of the system frameworks that are being used by the leaks bots. Even though a leak has been
    # fixed, it will be listed here until the bot has been updated with the newer frameworks.

    my @typesToExclude = (
    );

    my @callStacksToExclude = (
        "Flash_EnforceLocalSecurity" # leaks in Flash plug-in code, rdar://problem/4449747
    );

    if (isTiger()) {
        # Leak list for the version of Tiger used on the build bot.
        push @callStacksToExclude, (
            "CFRunLoopRunSpecific \\| malloc_zone_malloc", "CFRunLoopRunSpecific \\| CFAllocatorAllocate ", # leak in CFRunLoopRunSpecific, rdar://problem/4670839
            "CGImageSourceGetPropertiesAtIndex", # leak in ImageIO, rdar://problem/4628809
            "FOGetCoveredUnicodeChars", # leak in ATS, rdar://problem/3943604
            "GetLineDirectionPreference", "InitUnicodeUtilities", # leaks tool falsely reporting leak in CFNotificationCenterAddObserver, rdar://problem/4964790
            "ICCFPrefWrapper::GetPrefDictionary", # leaks in Internet Config. code, rdar://problem/4449794
            "NSHTTPURLProtocol setResponseHeader:", # leak in multipart/mixed-replace handling in Foundation, no Radar, but fixed in Leopard
            "NSURLCache cachedResponseForRequest", # leak in CFURL cache, rdar://problem/4768430
            "PCFragPrepareClosureFromFile", # leak in Code Fragment Manager, rdar://problem/3426998
            "WebCore::Selection::toRange", # bug in 'leaks', rdar://problem/4967949
            "WebCore::SubresourceLoader::create", # bug in 'leaks', rdar://problem/4985806
            "_CFPreferencesDomainDeepCopyDictionary", # leak in CFPreferences, rdar://problem/4220786
            "_objc_msgForward", # leak in NSSpellChecker, rdar://problem/4965278
            "gldGetString", # leak in OpenGL, rdar://problem/5013699
            "_setDefaultUserInfoFromURL", # leak in NSHTTPAuthenticator, rdar://problem/5546453 
            "SSLHandshake", # leak in SSL, rdar://problem/5546440 
            "SecCertificateCreateFromData", # leak in SSL code, rdar://problem/4464397
        );
        push @typesToExclude, (
            "THRD", # bug in 'leaks', rdar://problem/3387783
            "DRHT", # ditto (endian little hate i)
        );
    }

    if (isLeopard()) {
        # Leak list for the version of Leopard used on the build bot.
        push @callStacksToExclude, (
            "CFHTTPMessageAppendBytes", # leak in CFNetwork, rdar://problem/5435912
            "sendDidReceiveDataCallback", # leak in CFNetwork, rdar://problem/5441619
            "_CFHTTPReadStreamReadMark", # leak in CFNetwork, rdar://problem/5441468
            "httpProtocolStart", # leak in CFNetwork, rdar://problem/5468837
            "_CFURLConnectionSendCallbacks", # leak in CFNetwork, rdar://problem/5441600
            "DispatchQTMsg", # leak in QuickTime, PPC only, rdar://problem/5667132
            "QTMovieContentView createVisualContext", # leak in QuickTime, PPC only, rdar://problem/5667132
            "_CopyArchitecturesForJVMVersion", # leak in Java, rdar://problem/5910823
        );
    }

    if (isSnowLeopard()) {
        push @callStacksToExclude, (
            "readMakerNoteProps", # <rdar://problem/7156432> leak in ImageIO
            "QTKitMovieControllerView completeUISetup", # <rdar://problem/7155156> leak in QTKit
            "getVMInitArgs", # <rdar://problem/7714444> leak in Java
            "Java_java_lang_System_initProperties", # <rdar://problem/7714465> leak in Java
            "glrCompExecuteKernel", # <rdar://problem/7815391> leak in graphics driver while using OpenGL
            "NSNumberFormatter getObjectValue:forString:errorDescription:", # <rdar://problem/7149350> Leak in NSNumberFormatter
        );
    }

    if (isDarwin() && !isTiger() && !isLeopard() && !isSnowLeopard()) {
        push @callStacksToExclude, (
            "CGGradientCreateWithColorComponents", # leak in CoreGraphics, <rdar://problem/7888492>
        );
    }

    my $leaksTool = sourceDir() . "/Tools/Scripts/run-leaks";
    my $excludeString = "--exclude-callstack '" . (join "' --exclude-callstack '", @callStacksToExclude) . "'";
    $excludeString .= " --exclude-type '" . (join "' --exclude-type '", @typesToExclude) . "'" if @typesToExclude;

    print " ? checking for leaks in $dumpToolName\n";
    my $leaksOutput = `$leaksTool $excludeString $dumpToolPID`;
    my ($count, $bytes) = $leaksOutput =~ /Process $dumpToolPID: (\d+) leaks? for (\d+) total/;
    my ($excluded) = $leaksOutput =~ /(\d+) leaks? excluded/;

    my $adjustedCount = $count;
    $adjustedCount -= $excluded if $excluded;

    if (!$adjustedCount) {
        print " - no leaks found\n";
        unlink $leaksFilePath;
        return 0;
    } else {
        my $dir = $leaksFilePath;
        $dir =~ s|/[^/]+$|| or die;
        mkpath $dir;

        if ($excluded) {
            print " + $adjustedCount leaks ($bytes bytes including $excluded excluded leaks) were found, details in $leaksFilePath\n";
        } else {
            print " + $count leaks ($bytes bytes) were found, details in $leaksFilePath\n";
        }

        writeToFile($leaksFilePath, $leaksOutput);
        
        push @leaksFilenames, $leaksFilePath;
    }

    return $adjustedCount;
}

sub writeToFile($$)
{
    my ($filePath, $contents) = @_;
    open NEWFILE, ">", "$filePath" or die "Could not create $filePath. $!\n";
    print NEWFILE $contents;
    close NEWFILE;
}

# Break up a path into the directory (with slash) and base name.
sub splitpath($)
{
    my ($path) = @_;

    my $pathSeparator = "/";
    my $dirname = dirname($path) . $pathSeparator;
    $dirname = "" if $dirname eq "." . $pathSeparator;

    return ($dirname, basename($path));
}

# Sort first by directory, then by file, so all paths in one directory are grouped
# rather than being interspersed with items from subdirectories.
# Use numericcmp to sort directory and filenames to make order logical.
sub pathcmp($$)
{
    my ($patha, $pathb) = @_;

    my ($dira, $namea) = splitpath($patha);
    my ($dirb, $nameb) = splitpath($pathb);

    return numericcmp($dira, $dirb) if $dira ne $dirb;
    return numericcmp($namea, $nameb);
}

# Sort numeric parts of strings as numbers, other parts as strings.
# Makes 1.33 come after 1.3, which is cool.
sub numericcmp($$)
{
    my ($aa, $bb) = @_;

    my @a = split /(\d+)/, $aa;
    my @b = split /(\d+)/, $bb;

    # Compare one chunk at a time.
    # Each chunk is either all numeric digits, or all not numeric digits.
    while (@a && @b) {
        my $a = shift @a;
        my $b = shift @b;
        
        # Use numeric comparison if chunks are non-equal numbers.
        return $a <=> $b if $a =~ /^\d/ && $b =~ /^\d/ && $a != $b;

        # Use string comparison if chunks are any other kind of non-equal string.
        return $a cmp $b if $a ne $b;
    }
    
    # One of the two is now empty; compare lengths for result in this case.
    return @a <=> @b;
}

# Sort slowest tests first.
sub slowestcmp($$)
{
    my ($testa, $testb) = @_;

    my $dura = $durations{$testa};
    my $durb = $durations{$testb};
    return $durb <=> $dura if $dura != $durb;
    return pathcmp($testa, $testb);
}

sub launchWithEnv(\@\%)
{
    my ($args, $env) = @_;

    # Dump the current environment as perl code and then put it in quotes so it is one parameter.
    my $environmentDumper = Data::Dumper->new([\%{$env}], [qw(*ENV)]);
    $environmentDumper->Indent(0);
    $environmentDumper->Purity(1);
    my $allEnvVars = $environmentDumper->Dump();
    unshift @{$args}, "\"$allEnvVars\"";

    my $execScript = File::Spec->catfile(sourceDir(), qw(Tools Scripts execAppWithEnv));
    unshift @{$args}, $perlInterpreter, $execScript;
    return @{$args};
}

sub resolveAndMakeTestResultsDirectory()
{
    my $absTestResultsDirectory = File::Spec->rel2abs(glob $testResultsDirectory);
    mkpath $absTestResultsDirectory;
    return $absTestResultsDirectory;
}

sub openDiffTool()
{
    return if $isDiffToolOpen;
    return if !$pixelTests;

    my %CLEAN_ENV;
    $CLEAN_ENV{MallocStackLogging} = 1 if $shouldCheckLeaks;
    $imageDiffToolPID = open2(\*DIFFIN, \*DIFFOUT, $imageDiffTool, launchWithEnv(@diffToolArgs, %CLEAN_ENV)) or die "unable to open $imageDiffTool\n";
    $isDiffToolOpen = 1;
}

sub buildDumpTool($)
{
    my ($dumpToolName) = @_;

    my $dumpToolBuildScript =  "build-" . lc($dumpToolName);
    print STDERR "Running $dumpToolBuildScript\n";

    local *DEVNULL;
    my ($childIn, $childOut, $childErr);
    if ($quiet) {
        open(DEVNULL, ">", File::Spec->devnull()) or die "Failed to open /dev/null";
        $childOut = ">&DEVNULL";
        $childErr = ">&DEVNULL";
    } else {
        # When not quiet, let the child use our stdout/stderr.
        $childOut = ">&STDOUT";
        $childErr = ">&STDERR";
    }

    my @args = argumentsForConfiguration();
    my $buildProcess = open3($childIn, $childOut, $childErr, $perlInterpreter, File::Spec->catfile(qw(Tools Scripts), $dumpToolBuildScript), @args) or die "Failed to run build-dumprendertree";
    close($childIn);
    waitpid $buildProcess, 0;
    my $buildResult = $?;
    close($childOut);
    close($childErr);

    close DEVNULL if ($quiet);

    if ($buildResult) {
        print STDERR "Compiling $dumpToolName failed!\n";
        exit exitStatus($buildResult);
    }
}

sub openDumpTool()
{
    return if $isDumpToolOpen;

    if ($verbose && $testsPerDumpTool != 1) {
        print "| Opening DumpTool |\n";
    }

    my %CLEAN_ENV;

    # Generic environment variables
    if (defined $ENV{'WEBKIT_TESTFONTS'}) {
        $CLEAN_ENV{WEBKIT_TESTFONTS} = $ENV{'WEBKIT_TESTFONTS'};
    }

    # unique temporary directory for each DumpRendertree - needed for running more DumpRenderTree in parallel
    $CLEAN_ENV{DUMPRENDERTREE_TEMP} = File::Temp::tempdir('DumpRenderTree-XXXXXX', TMPDIR => 1, CLEANUP => 1);
    $CLEAN_ENV{XML_CATALOG_FILES} = ""; # work around missing /etc/catalog <rdar://problem/4292995>

    # Platform spesifics
    if (isLinux()) {
        if (defined $ENV{'DISPLAY'}) {
            $CLEAN_ENV{DISPLAY} = $ENV{'DISPLAY'};
        } else {
            $CLEAN_ENV{DISPLAY} = ":1";
        }
        if (defined $ENV{'XAUTHORITY'}) {
            $CLEAN_ENV{XAUTHORITY} = $ENV{'XAUTHORITY'};
        }

        $CLEAN_ENV{HOME} = $ENV{'HOME'};
        $CLEAN_ENV{LANG} = $ENV{'LANG'};

        if (defined $ENV{'LD_LIBRARY_PATH'}) {
            $CLEAN_ENV{LD_LIBRARY_PATH} = $ENV{'LD_LIBRARY_PATH'};
        }
        if (defined $ENV{'DBUS_SESSION_BUS_ADDRESS'}) {
            $CLEAN_ENV{DBUS_SESSION_BUS_ADDRESS} = $ENV{'DBUS_SESSION_BUS_ADDRESS'};
        }
    } elsif (isDarwin()) {
        if (defined $ENV{'DYLD_LIBRARY_PATH'}) {
            $CLEAN_ENV{DYLD_LIBRARY_PATH} = $ENV{'DYLD_LIBRARY_PATH'};
        }
        if (defined $ENV{'HOME'}) {
            $CLEAN_ENV{HOME} = $ENV{'HOME'};
        }

        $CLEAN_ENV{DYLD_FRAMEWORK_PATH} = $productDir;
        $CLEAN_ENV{DYLD_INSERT_LIBRARIES} = "/usr/lib/libgmalloc.dylib" if $guardMalloc;
    } elsif (isCygwin()) {
        $CLEAN_ENV{HOMEDRIVE} = $ENV{'HOMEDRIVE'};
        $CLEAN_ENV{HOMEPATH} = $ENV{'HOMEPATH'};
        $CLEAN_ENV{_NT_SYMBOL_PATH} = $ENV{_NT_SYMBOL_PATH};

        setPathForRunningWebKitApp(\%CLEAN_ENV);
    }

    # Port specifics
    if (isGtk()) {
        $CLEAN_ENV{GTK_MODULES} = "gail";
        $CLEAN_ENV{WEBKIT_INSPECTOR_PATH} = "$productDir/resources/inspector";
    }

    if (isQt()) {
        $CLEAN_ENV{QTWEBKIT_PLUGIN_PATH} = productDir() . "/lib/plugins";
        $CLEAN_ENV{QT_DRT_WEBVIEW_MODE} = $ENV{"QT_DRT_WEBVIEW_MODE"};
    }
    
    my @args = ($dumpTool, @toolArgs);
    if (isAppleMacWebKit() and !isTiger()) { 
        unshift @args, "arch", "-" . architecture();             
    }

    if ($useValgrind) {
        unshift @args, "valgrind", "--suppressions=$platformBaseDirectory/qt/SuppressedValgrindErrors";
    } 

    if ($useWebKitTestRunner) {
        # Make WebKitTestRunner use a similar timeout. We don't use the exact same timeout to avoid
        # race conditions.
        push @args, "--timeout", $timeoutSeconds - 5;
    }

    $CLEAN_ENV{MallocStackLogging} = 1 if $shouldCheckLeaks;

    $dumpToolPID = open3(\*OUT, \*IN, \*ERROR, launchWithEnv(@args, %CLEAN_ENV)) or die "Failed to start tool: $dumpTool\n";
    $isDumpToolOpen = 1;
    $dumpToolCrashed = 0;
}

sub closeDumpTool()
{
    return if !$isDumpToolOpen;

    if ($verbose && $testsPerDumpTool != 1) {
        print "| Closing DumpTool |\n";
    }

    close IN;
    close OUT;
    waitpid $dumpToolPID, 0;
    
    # check for WebCore counter leaks.
    if ($shouldCheckLeaks) {
        while (<ERROR>) {
            print;
        }
    }
    close ERROR;
    $isDumpToolOpen = 0;
}

sub dumpToolDidCrash()
{
    return 1 if $dumpToolCrashed;
    return 0 unless $isDumpToolOpen;
    my $pid = waitpid(-1, WNOHANG);
    return 1 if ($pid == $dumpToolPID);

    # On Mac OS X, crashing may be significantly delayed by crash reporter.
    return 0 unless isAppleMacWebKit();

    return DumpRenderTreeSupport::processIsCrashing($dumpToolPID);
}

sub configureAndOpenHTTPDIfNeeded()
{
    return if $isHttpdOpen;
    my $absTestResultsDirectory = resolveAndMakeTestResultsDirectory();
    my $listen = "127.0.0.1:$httpdPort";
    my @args = (
        "-c", "CustomLog \"$absTestResultsDirectory/access_log.txt\" common",
        "-c", "ErrorLog \"$absTestResultsDirectory/error_log.txt\"",
        "-C", "Listen $listen"
    );

    my @defaultArgs = getDefaultConfigForTestDirectory($testDirectory);
    @args = (@defaultArgs, @args);

    waitForHTTPDLock() if $shouldWaitForHTTPD;
    $isHttpdOpen = openHTTPD(@args);
}

sub checkPythonVersion()
{
    # we have not chdir to sourceDir yet.
    system $perlInterpreter, File::Spec->catfile(sourceDir(), qw(Tools Scripts ensure-valid-python)), "--check-only";
    return exitStatus($?) == 0;
}

sub openWebSocketServerIfNeeded()
{
    return 1 if $isWebSocketServerOpen;
    return 0 if $failedToStartWebSocketServer;

    my $webSocketHandlerDir = "$testDirectory";
    my $absTestResultsDirectory = resolveAndMakeTestResultsDirectory();
    $webSocketServerPidFile = "$absTestResultsDirectory/websocket.pid";

    my @args = (
        "Tools/Scripts/new-run-webkit-websocketserver",
        "--server", "start",
        "--port", "$webSocketPort",
        "--root", "$webSocketHandlerDir",
        "--output-dir", "$absTestResultsDirectory",
        "--pidfile", "$webSocketServerPidFile"
    );
    system "/usr/bin/python", @args;

    $isWebSocketServerOpen = 1;
    return 1;
}

sub closeWebSocketServer()
{
    return if !$isWebSocketServerOpen;

    my @args = (
        "Tools/Scripts/new-run-webkit-websocketserver",
        "--server", "stop",
        "--pidfile", "$webSocketServerPidFile"
    );
    system "/usr/bin/python", @args;
    unlink "$webSocketServerPidFile";

    # wss is disabled until all platforms support pyOpenSSL.
    $isWebSocketServerOpen = 0;
}

sub fileNameWithNumber($$)
{
    my ($base, $number) = @_;
    return "$base$number" if ($number > 1);
    return $base;
}

sub processIgnoreTests($$)
{
    my @ignoreList = split(/\s*,\s*/, shift);
    my $listName = shift;

    my $disabledSuffix = "-disabled";

    my $addIgnoredDirectories = sub {
        return () if exists $ignoredLocalDirectories{basename($File::Find::dir)};
        $ignoredDirectories{File::Spec->abs2rel($File::Find::dir, $testDirectory)} = 1;
        return @_;
    };
    foreach my $item (@ignoreList) {
        my $path = catfile($testDirectory, $item); 
        if (-d $path) {
            $ignoredDirectories{$item} = 1;
            find({ preprocess => $addIgnoredDirectories, wanted => sub {} }, $path);
        }
        elsif (-f $path) {
            $ignoredFiles{$item} = 1;
        } elsif (-f $path . $disabledSuffix) {
            # The test is disabled, so do nothing.
        } else {
            print "$listName list contained '$item', but no file of that name could be found\n";
        }
    }
}

sub stripExtension($)
{
    my ($test) = @_;

    $test =~ s/\.[a-zA-Z]+$//;
    return $test;
}

sub isTextOnlyTest($)
{
    my ($actual) = @_;
    my $isText;
    if ($actual =~ /^layer at/ms) {
        $isText = 0;
    } else {
        $isText = 1;
    }
    return $isText;
}

sub expectedDirectoryForTest($;$;$)
{
    my ($base, $isText, $expectedExtension) = @_;

    my @directories = @platformResultHierarchy;

    my @extraPlatforms = ();
    if (isAppleWinWebKit()) {
        push @extraPlatforms, "mac-wk2" if $platform eq "win-wk2";
        push @extraPlatforms, qw(mac-snowleopard mac);
    }
  
    push @directories, map { catdir($platformBaseDirectory, $_) } @extraPlatforms;
    push @directories, $expectedDirectory;

    # If we already have expected results, just return their location.
    foreach my $directory (@directories) {
        return $directory if -f File::Spec->catfile($directory, "$base-$expectedTag.$expectedExtension");
    }

    # For cross-platform tests, text-only results should go in the cross-platform directory,
    # while render tree dumps should go in the least-specific platform directory.
    return $isText ? $expectedDirectory : $platformResultHierarchy[$#platformResultHierarchy];
}

sub countFinishedTest($$$$)
{
    my ($test, $base, $result, $isText) = @_;

    if (($count + 1) % $testsPerDumpTool == 0 || $count == $#tests) {
        if ($shouldCheckLeaks) {
            my $fileName;
            if ($testsPerDumpTool == 1) {
                $fileName = File::Spec->catfile($testResultsDirectory, "$base-leaks.txt");
            } else {
                $fileName = File::Spec->catfile($testResultsDirectory, fileNameWithNumber($dumpToolName, $leaksOutputFileNumber) . "-leaks.txt");
            }
            my $leakCount = countAndPrintLeaks($dumpToolName, $dumpToolPID, $fileName);
            $totalLeaks += $leakCount;
            $leaksOutputFileNumber++ if ($leakCount);
        }

        closeDumpTool();
    }
    
    $count++;
    $counts{$result}++;
    push @{$tests{$result}}, $test;
}

sub testCrashedOrTimedOut($$$$$$)
{
    my ($test, $base, $didCrash, $webProcessCrashed, $actual, $error) = @_;

    printFailureMessageForTest($test, $webProcessCrashed ? "Web process crashed" : $didCrash ? "crashed" : "timed out");

    sampleDumpTool() unless $didCrash || $webProcessCrashed;

    my $dir = dirname(File::Spec->catdir($testResultsDirectory, $base));
    mkpath $dir;

    deleteExpectedAndActualResults($base);

    if (defined($error) && length($error)) {
        writeToFile(File::Spec->catfile($testResultsDirectory, "$base-$errorTag.txt"), $error);
    }

    recordActualResultsAndDiff($base, $actual);

    # There's no point in killing the dump tool when it's crashed. And it will kill itself when the
    # web process crashes.
    kill 9, $dumpToolPID unless $didCrash || $webProcessCrashed;

    closeDumpTool();

    captureSavedCrashLog($base, $webProcessCrashed) if $didCrash || $webProcessCrashed;

    return unless isCygwin() && !$didCrash && $base =~ /^http/;
    # On Cygwin, http tests timing out can be a symptom of a non-responsive httpd.
    # If we timed out running an http test, try restarting httpd.
    $isHttpdOpen = !closeHTTPD();
    configureAndOpenHTTPDIfNeeded();
}

sub captureSavedCrashLog($$)
{
    my ($base, $webProcessCrashed) = @_;

    my $crashLog;

    my $glob;
    if (isCygwin()) {
        $glob = File::Spec->catfile($testResultsDirectory, $windowsCrashLogFilePrefix . "*.txt");
    } elsif (isAppleMacWebKit()) {
        my $crashLogDirectoryName;
        if (isTiger() || isLeopard()) {
            $crashLogDirectoryName = "CrashReporter";
        } else {
            $crashLogDirectoryName = "DiagnosticReports";
        }

        $glob = File::Spec->catfile("~", "Library", "Logs", $crashLogDirectoryName, ($webProcessCrashed ? "WebProcess" : $dumpToolName) . "_*.crash");

        # Even though the dump tool has exited, CrashReporter might still be running. We need to
        # wait for it to exit to ensure it has saved its crash log to disk. For simplicitly, we'll
        # assume that the ReportCrash process with the highest PID is the one we want.
        if (my @reportCrashPIDs = sort map { /^\s*(\d+)/; $1 } grep { /ReportCrash/ } `/bin/ps x`) {
            my $reportCrashPID = $reportCrashPIDs[$#reportCrashPIDs];
            # We use kill instead of waitpid because ReportCrash is not one of our child processes.
            usleep(250000) while kill(0, $reportCrashPID) > 0;
        }
    }

    return unless $glob;

    # We assume that the newest crash log in matching the glob is the one that corresponds to the crash that just occurred.
    if (my $newestCrashLog = findNewestFileMatchingGlob($glob)) {
        # The crash log must have been created after this script started running.
        $crashLog = $newestCrashLog if -M $newestCrashLog < 0;
    }

    return unless $crashLog;

    move($crashLog, File::Spec->catfile($testResultsDirectory, "$base-$crashLogTag.txt"));
}

sub findNewestFileMatchingGlob($)
{
    my ($glob) = @_;

    my @paths = glob $glob;
    return unless scalar(@paths);

    my @pathsAndTimes = map { [$_, -M $_] } @paths;
    @pathsAndTimes = sort { $b->[1] <=> $a->[1] } @pathsAndTimes;
    return $pathsAndTimes[$#pathsAndTimes]->[0];
}

sub printFailureMessageForTest($$)
{
    my ($test, $description) = @_;

    unless ($verbose) {
        print "\n" unless $atLineStart;
        print "$test -> ";
    }
    print "$description\n";
    $atLineStart = 1;
}

my %cygpaths = ();

sub openCygpathIfNeeded($)
{
    my ($options) = @_;

    return unless isCygwin();
    return $cygpaths{$options} if $cygpaths{$options} && $cygpaths{$options}->{"open"};

    local (*CYGPATHIN, *CYGPATHOUT);
    my $pid = open2(\*CYGPATHIN, \*CYGPATHOUT, "cygpath -f - $options");
    my $cygpath =  {
        "pid" => $pid,
        "in" => *CYGPATHIN,
        "out" => *CYGPATHOUT,
        "open" => 1
    };

    $cygpaths{$options} = $cygpath;

    return $cygpath;
}

sub closeCygpaths()
{
    return unless isCygwin();

    foreach my $cygpath (values(%cygpaths)) {
        close $cygpath->{"in"};
        close $cygpath->{"out"};
        waitpid($cygpath->{"pid"}, 0);
        $cygpath->{"open"} = 0;

    }
}

sub convertPathUsingCygpath($$)
{
    my ($path, $options) = @_;

    # cygpath -f (at least in Cygwin 1.7) converts spaces into newlines. We remove spaces here and
    # add them back in after conversion to work around this.
    my $spaceSubstitute = "__NOTASPACE__";
    $path =~ s/ /\Q$spaceSubstitute\E/g;

    my $cygpath = openCygpathIfNeeded($options);
    local *inFH = $cygpath->{"in"};
    local *outFH = $cygpath->{"out"};
    print outFH $path . "\n";
    my $convertedPath = <inFH>;
    chomp($convertedPath) if defined $convertedPath;

    $convertedPath =~ s/\Q$spaceSubstitute\E/ /g;
    return $convertedPath;
}

sub toCygwinPath($)
{
    my ($path) = @_;
    return unless isCygwin();

    return convertPathUsingCygpath($path, "-u");
}

sub toWindowsPath($)
{
    my ($path) = @_;
    return unless isCygwin();

    return convertPathUsingCygpath($path, "-w");
}

sub toURL($)
{
    my ($path) = @_;

    if ($useRemoteLinksToTests) {
        my $relativePath = File::Spec->abs2rel($path, $testDirectory);

        # If the file is below the test directory then convert it into a link to the file in SVN
        if ($relativePath !~ /^\.\.\//) {
            my $revision = svnRevisionForDirectory($testDirectory);
            my $svnPath = pathRelativeToSVNRepositoryRootForPath($path);
            return "http://trac.webkit.org/export/$revision/$svnPath";
        }
    }

    return $path unless isCygwin();

    return "file:///" . convertPathUsingCygpath($path, "-m");
}

sub validateSkippedArg($$;$)
{
    my ($option, $value, $value2) = @_;
    my %validSkippedValues = map { $_ => 1 } qw(default ignore only);
    $value = lc($value);
    die "Invalid argument '" . $value . "' for option $option" unless $validSkippedValues{$value};
    $treatSkipped = $value;
}

sub htmlForResultsSection(\@$&)
{
    my ($tests, $description, $linkGetter) = @_;

    my @html = ();
    return join("\n", @html) unless @{$tests};

    push @html, "<p>$description:</p>";
    push @html, "<table>";
    foreach my $test (@{$tests}) {
        push @html, "<tr>";
        push @html, "<td><a href=\"" . toURL("$testDirectory/$test") . "\">$test</a></td>";
        foreach my $link (@{&{$linkGetter}($test)}) {
            push @html, "<td>";
            push @html, "<a href=\"$link->{href}\">$link->{text}</a>" if -f File::Spec->catfile($testResultsDirectory, $link->{href});
            push @html, "</td>";
        }
        push @html, "</tr>";
    }
    push @html, "</table>";

    return join("\n", @html);
}

sub linksForExpectedAndActualResults($)
{
    my ($base) = @_;

    my @links = ();

    return \@links unless -s "$testResultsDirectory/$base-$diffsTag.txt";
    
    my $expectedResultPath = $expectedResultPaths{$base};
    my ($expectedResultFileName, $expectedResultsDirectory, $expectedResultExtension) = fileparse($expectedResultPath, qr{\.[^.]+$});

    push @links, { href => "$base-$expectedTag$expectedResultExtension", text => "expected" };
    push @links, { href => "$base-$actualTag$expectedResultExtension", text => "actual" };
    push @links, { href => "$base-$diffsTag.txt", text => "diff" };
    push @links, { href => "$base-$prettyDiffTag.html", text => "pretty diff" };

    return \@links;
}

sub linksForMismatchTest
{
    my ($test) = @_;

    my @links = ();

    my $base = stripExtension($test);

    push @links, @{linksForExpectedAndActualResults($base)};
    return \@links unless $pixelTests && $imagesPresent{$base};

    push @links, { href => "$base-$expectedTag.png", text => "expected image" };
    push @links, { href => "$base-$diffsTag.html", text => "image diffs" };
    push @links, { href => "$base-$diffsTag.png", text => "$imageDifferences{$base}%" };

    return \@links;
}

sub crashLocation($)
{
    my ($base) = @_;

    my $crashLogFile = File::Spec->catfile($testResultsDirectory, "$base-$crashLogTag.txt");

    if (isCygwin()) {
        # We're looking for the following text:
        #
        # FOLLOWUP_IP:
        # module!function+offset [file:line]
        #
        # The second contains the function that crashed (or the function that ended up jumping to a bad
        # address, as in the case of a null function pointer).

        open LOG, "<", $crashLogFile or return;
        while (my $line = <LOG>) {
            last if $line =~ /^FOLLOWUP_IP:/;
        }
        my $desiredLine = <LOG>;
        close LOG;

        return unless $desiredLine;

        # Just take everything up to the first space (which is where the file/line information should
        # start).
        $desiredLine =~ /^(\S+)/;
        return $1;
    }

    if (isAppleMacWebKit()) {
        # We're looking for the following text:
        #
        # Thread M Crashed:
        # N   module                              address function + offset (file:line)
        #
        # Some lines might have a module of "???" if we've jumped to a bad address. We should skip
        # past those.

        open LOG, "<", $crashLogFile or return;
        while (my $line = <LOG>) {
            last if $line =~ /^Thread \d+ Crashed:/;
        }
        my $location;
        while (my $line = <LOG>) {
            $line =~ /^\d+\s+(\S+)\s+\S+ (.* \+ \d+)/ or next;
            my $module = $1;
            my $functionAndOffset = $2;
            next if $module eq "???";
            $location = "$module: $functionAndOffset";
            last;
        }
        close LOG;
        return $location;
    }
}

sub linksForErrorTest
{
    my ($test) = @_;

    my @links = ();

    my $base = stripExtension($test);

    my $crashLogText = "crash log";
    if (my $crashLocation = crashLocation($base)) {
        $crashLogText .= " (<code>" . CGI::escapeHTML($crashLocation) . "</code>)";
    }

    push @links, @{linksForExpectedAndActualResults($base)};
    push @links, { href => "$base-$errorTag.txt", text => "stderr" };
    push @links, { href => "$base-$crashLogTag.txt", text => $crashLogText };

    return \@links;
}

sub linksForNewTest
{
    my ($test) = @_;

    my @links = ();

    my $base = stripExtension($test);

    my $expectedResultPath = $expectedResultPaths{$base};
    my ($expectedResultFileName, $expectedResultsDirectory, $expectedResultExtension) = fileparse($expectedResultPath, qr{\.[^.]+$});

    push @links, { href => "$base-$actualTag$expectedResultExtension", text => "result" };
    if ($pixelTests && $imagesPresent{$base}) {
        push @links, { href => "$base-$expectedTag.png", text => "image" };
    }

    return \@links;
}

sub deleteExpectedAndActualResults($)
{
    my ($base) = @_;

    unlink "$testResultsDirectory/$base-$actualTag.txt";
    unlink "$testResultsDirectory/$base-$diffsTag.txt";
    unlink "$testResultsDirectory/$base-$errorTag.txt";
    unlink "$testResultsDirectory/$base-$crashLogTag.txt";
}

sub recordActualResultsAndDiff($$)
{
    my ($base, $actualResults) = @_;

    return unless defined($actualResults) && length($actualResults);

    my $expectedResultPath = $expectedResultPaths{$base};
    my ($expectedResultFileNameMinusExtension, $expectedResultDirectoryPath, $expectedResultExtension) = fileparse($expectedResultPath, qr{\.[^.]+$});
    my $actualResultsPath = File::Spec->catfile($testResultsDirectory, "$base-$actualTag$expectedResultExtension");
    my $copiedExpectedResultsPath = File::Spec->catfile($testResultsDirectory, "$base-$expectedTag$expectedResultExtension");

    mkpath(dirname($actualResultsPath));
    writeToFile("$actualResultsPath", $actualResults);

    if (-f $expectedResultPath) {
        copy("$expectedResultPath", "$copiedExpectedResultsPath");
    } else {
        open EMPTY, ">$copiedExpectedResultsPath";
        close EMPTY;
    }

    my $diffOuputBasePath = File::Spec->catfile($testResultsDirectory, $base);
    my $diffOutputPath = "$diffOuputBasePath-$diffsTag.txt";
    system "diff -u \"$copiedExpectedResultsPath\" \"$actualResultsPath\" > \"$diffOutputPath\"";

    my $prettyDiffOutputPath = "$diffOuputBasePath-$prettyDiffTag.html";
    my $prettyPatchPath = "Websites/bugs.webkit.org/PrettyPatch/";
    my $prettifyPath = "$prettyPatchPath/prettify.rb";
    system "ruby -I \"$prettyPatchPath\" \"$prettifyPath\" \"$diffOutputPath\" > \"$prettyDiffOutputPath\"";
}

sub buildPlatformResultHierarchy()
{
    mkpath($platformTestDirectory) if ($platform eq "undefined" && !-d "$platformTestDirectory");

    my @platforms;
    
    my $isMac = $platform =~ /^mac/;
    my $isWin = $platform =~ /^win/;
    if ($isMac || $isWin) {
        my $effectivePlatform = $platform;
        if ($platform eq "mac-wk2" || $platform eq "win-wk2") {
            push @platforms, $platform;
            $effectivePlatform = $realPlatform;
        }

        my @platformList = $isMac ? @macPlatforms : @winPlatforms;
        my $i;
        for ($i = 0; $i < @platformList; $i++) {
            last if $platformList[$i] eq $effectivePlatform;
        }
        for (; $i < @platformList; $i++) {
            push @platforms, $platformList[$i];
        }
    } elsif ($platform =~ /^qt-/) {
        push @platforms, $platform;
        push @platforms, "qt";
    } else {
        @platforms = $platform;
    }

    my @hierarchy;
    for (my $i = 0; $i < @platforms; $i++) {
        my $scoped = catdir($platformBaseDirectory, $platforms[$i]);
        push(@hierarchy, $scoped) if (-d $scoped);
    }
    
    return @hierarchy;
}

sub buildPlatformTestHierarchy(@)
{
    my (@platformHierarchy) = @_;
    return @platformHierarchy if (@platformHierarchy < 2);
    if ($platformHierarchy[0] =~ /mac-wk2/) {
        return ($platformHierarchy[0], $platformHierarchy[1], $platformHierarchy[$#platformHierarchy]);
    }
    return ($platformHierarchy[0], $platformHierarchy[$#platformHierarchy]);
}

sub epiloguesAndPrologues($$)
{
    my ($lastDirectory, $directory) = @_;
    my @lastComponents = split('/', $lastDirectory);
    my @components = split('/', $directory);

    while (@lastComponents) {
        if (!defined($components[0]) || $lastComponents[0] ne $components[0]) {
            last;
        }
        shift @components;
        shift @lastComponents;
    }

    my @result;
    my $leaving = $lastDirectory;
    foreach (@lastComponents) {
        my $epilogue = $leaving . "/resources/run-webkit-tests-epilogue.html";
        foreach (@platformResultHierarchy) {
            push @result, catdir($_, $epilogue) if (stat(catdir($_, $epilogue)));
        }
        push @result, catdir($testDirectory, $epilogue) if (stat(catdir($testDirectory, $epilogue)));
        $leaving =~ s|(^\|/)[^/]+$||;
    }

    my $entering = $leaving;
    foreach (@components) {
        $entering .= '/' . $_;
        my $prologue = $entering . "/resources/run-webkit-tests-prologue.html";
        push @result, catdir($testDirectory, $prologue) if (stat(catdir($testDirectory, $prologue)));
        foreach (reverse @platformResultHierarchy) {
            push @result, catdir($_, $prologue) if (stat(catdir($_, $prologue)));
        }
    }
    return @result;
}
    
sub parseLeaksandPrintUniqueLeaks()
{
    return unless @leaksFilenames;
     
    my $mergedFilenames = join " ", @leaksFilenames;
    my $parseMallocHistoryTool = sourceDir() . "/Tools/Scripts/parse-malloc-history";
    
    open MERGED_LEAKS, "cat $mergedFilenames | $parseMallocHistoryTool --merge-depth $mergeDepth  - |" ;
    my @leakLines = <MERGED_LEAKS>;
    close MERGED_LEAKS;
    
    my $uniqueLeakCount = 0;
    my $totalBytes;
    foreach my $line (@leakLines) {
        ++$uniqueLeakCount if ($line =~ /^(\d*)\scalls/);
        $totalBytes = $1 if $line =~ /^total\:\s(.*)\s\(/;
    }
    
    print "\nWARNING: $totalLeaks total leaks found for a total of $totalBytes!\n";
    print "WARNING: $uniqueLeakCount unique leaks found!\n";
    print "See above for individual leaks results.\n" if ($leaksOutputFileNumber > 2);
    
}

sub extensionForMimeType($)
{
    my ($mimeType) = @_;

    if ($mimeType eq "application/x-webarchive") {
        return "webarchive";
    } elsif ($mimeType eq "application/pdf") {
        return "pdf";
    }
    return "txt";
}

# Read up to the first #EOF (the content block of the test), or until detecting crashes or timeouts.
sub readFromDumpToolWithTimer(**)
{
    my ($fhIn, $fhError) = @_;

    setFileHandleNonBlocking($fhIn, 1);
    setFileHandleNonBlocking($fhError, 1);

    my $maximumSecondsWithoutOutput = $timeoutSeconds;
    my $microsecondsToWaitBeforeReadingAgain = 1000;

    my $timeOfLastSuccessfulRead = time;

    my @output = ();
    my @error = ();
    my $status = "success";
    my $mimeType = "text/plain";
    # We don't have a very good way to know when the "headers" stop
    # and the content starts, so we use this as a hack:
    my $haveSeenContentType = 0;
    my $haveSeenEofIn = 0;
    my $haveSeenEofError = 0;

    while (1) {
        if (time - $timeOfLastSuccessfulRead > $maximumSecondsWithoutOutput) {
            $status = dumpToolDidCrash() ? "crashed" : "timedOut";
            last;
        }

        # Once we've seen the EOF, we must not read anymore.
        my $lineIn = readline($fhIn) unless $haveSeenEofIn;
        my $lineError = readline($fhError) unless $haveSeenEofError;
        if (!defined($lineIn) && !defined($lineError)) {
            last if ($haveSeenEofIn && $haveSeenEofError);

            if ($! != EAGAIN) {
                $status = "crashed";
                last;
            }

            # No data ready
            usleep($microsecondsToWaitBeforeReadingAgain);
            next;
        }

        $timeOfLastSuccessfulRead = time;

        if (defined($lineIn)) {
            if (!$haveSeenContentType && $lineIn =~ /^Content-Type: (\S+)$/) {
                $mimeType = $1;
                $haveSeenContentType = 1;
            } elsif ($lineIn =~ /#EOF/) {
                $haveSeenEofIn = 1;
            } else {
                push @output, $lineIn;
            }
        }
        if (defined($lineError)) {
            if ($lineError =~ /#CRASHED - WebProcess/) {
                $status = "webProcessCrashed";
                last;
            }
            if ($lineError =~ /#CRASHED/) {
                $status = "crashed";
                last;
            }
            if ($lineError =~ /#EOF/) {
                $haveSeenEofError = 1;
            } else {
                push @error, $lineError;
            }
        }
    }

    setFileHandleNonBlocking($fhIn, 0);
    setFileHandleNonBlocking($fhError, 0);
    return {
        output => join("", @output),
        error => join("", @error),
        status => $status,
        mimeType => $mimeType,
        extension => extensionForMimeType($mimeType)
    };
}

sub setFileHandleNonBlocking(*$)
{
    my ($fh, $nonBlocking) = @_;

    my $flags = fcntl($fh, F_GETFL, 0) or die "Couldn't get filehandle flags";

    if ($nonBlocking) {
        $flags |= O_NONBLOCK;
    } else {
        $flags &= ~O_NONBLOCK;
    }

    fcntl($fh, F_SETFL, $flags) or die "Couldn't set filehandle flags";

    return 1;
}

sub sampleDumpTool()
{
    return unless isAppleMacWebKit();
    return unless $runSample;

    my $outputDirectory = "$ENV{HOME}/Library/Logs/DumpRenderTree";
    -d $outputDirectory or mkdir $outputDirectory;

    my $outputFile = "$outputDirectory/HangReport.txt";
    system "/usr/bin/sample", $dumpToolPID, qw(10 10 -file), $outputFile;
}

sub stripMetrics($$)
{
    my ($actual, $expected) = @_;

    foreach my $result ($actual, $expected) {
        $result =~ s/at \(-?[0-9]+,-?[0-9]+\) *//g;
        $result =~ s/size -?[0-9]+x-?[0-9]+ *//g;
        $result =~ s/text run width -?[0-9]+: //g;
        $result =~ s/text run width -?[0-9]+ [a-zA-Z ]+: //g;
        $result =~ s/RenderButton {BUTTON} .*/RenderButton {BUTTON}/g;
        $result =~ s/RenderImage {INPUT} .*/RenderImage {INPUT}/g;
        $result =~ s/RenderBlock {INPUT} .*/RenderBlock {INPUT}/g;
        $result =~ s/RenderTextControl {INPUT} .*/RenderTextControl {INPUT}/g;
        $result =~ s/\([0-9]+px/px/g;
        $result =~ s/ *" *\n +" */ /g;
        $result =~ s/" +$/"/g;

        $result =~ s/- /-/g;
        $result =~ s/\n( *)"\s+/\n$1"/g;
        $result =~ s/\s+"\n/"\n/g;
        $result =~ s/scrollWidth [0-9]+/scrollWidth/g;
        $result =~ s/scrollHeight [0-9]+/scrollHeight/g;
    }

    return ($actual, $expected);
}

sub fileShouldBeIgnored
{
    my ($filePath) = @_;
    foreach my $ignoredDir (keys %ignoredDirectories) {
        if ($filePath =~ m/^$ignoredDir/) {
            return 1;
        }
    }
    return 0;
}

sub readSkippedFiles($)
{
    my ($constraintPath) = @_;

    my @skippedFileDirectories = @platformTestHierarchy;

    # Because nearly all of the skipped tests for WebKit 2 on Mac are due to
    # cross-platform issues, Windows will use both the Mac and Windows skipped
    # lists to avoid maintaining separate lists.
    push(@skippedFileDirectories, catdir($platformBaseDirectory, "mac-wk2")) if $platform eq "win-wk2";

    foreach my $level (@skippedFileDirectories) {
        if (open SKIPPED, "<", "$level/Skipped") {
            if ($verbose) {
                my ($dir, $name) = splitpath($level);
                print "Skipped tests in $name:\n";
            }

            while (<SKIPPED>) {
                my $skipped = $_;
                chomp $skipped;
                $skipped =~ s/^[ \n\r]+//;
                $skipped =~ s/[ \n\r]+$//;
                if ($skipped && $skipped !~ /^#/) {
                    if ($skippedOnly) {
                        if (!fileShouldBeIgnored($skipped)) {
                            if (!$constraintPath) {
                                # Always add $skipped since no constraint path was specified on the command line.
                                push(@ARGV, $skipped);
                            } elsif ($skipped =~ /^($constraintPath)/) {
                                # Add $skipped only if it matches the current path constraint, e.g.,
                                # "--skipped=only dir1" with "dir1/file1.html" on the skipped list.
                                push(@ARGV, $skipped);
                            } elsif ($constraintPath =~ /^($skipped)/) {
                                # Add current path constraint if it is more specific than the skip list entry,
                                # e.g., "--skipped=only dir1/dir2/dir3" with "dir1" on the skipped list.
                                push(@ARGV, $constraintPath);
                            }
                        } elsif ($verbose) {
                            print "    $skipped\n";
                        }
                    } else {
                        if ($verbose) {
                            print "    $skipped\n";
                        }
                        processIgnoreTests($skipped, "Skipped");
                    }
                }
            }
            close SKIPPED;
        }
    }
}

my @testsFound;

sub isUsedInReftest
{
    my $filename = $_;
    if ($filename =~ /-$expectedTag(-$mismatchTag)?\.html$/) {
        return 1;
    }
    my $base = stripExtension($filename);
    return (-f "$base-$expectedTag.html" || -f "$base-$expectedTag-$mismatchTag.html");
}

sub directoryFilter
{
    return () if exists $ignoredLocalDirectories{basename($File::Find::dir)};
    return () if exists $ignoredDirectories{File::Spec->abs2rel($File::Find::dir, $testDirectory)};
    return @_;
}

sub fileFilter
{
    my $filename = $_;
    if ($filename =~ /\.([^.]+)$/) {
        my $extension = $1;
        if (exists $supportedFileExtensions{$extension} && !isUsedInReftest($filename)) {
            my $path = File::Spec->abs2rel(catfile($File::Find::dir, $filename), $testDirectory);
            push @testsFound, $path if !exists $ignoredFiles{$path};
        }
    }
}

sub findTestsToRun
{
    my @testsToRun = ();

    for my $test (@ARGV) {
        $test =~ s/^(\Q$layoutTestsName\E|\Q$testDirectory\E)\///;
        my $fullPath = catfile($testDirectory, $test);
        if (file_name_is_absolute($test)) {
            print "can't run test $test outside $testDirectory\n";
        } elsif (-f $fullPath) {
            my ($filename, $pathname, $fileExtension) = fileparse($test, qr{\.[^.]+$});
            if (!exists $supportedFileExtensions{substr($fileExtension, 1)}) {
                print "test $test does not have a supported extension\n";
            } elsif ($testHTTP || $pathname !~ /^http\//) {
                push @testsToRun, $test;
            }
        } elsif (-d $fullPath) {
            @testsFound = ();
            find({ preprocess => \&directoryFilter, wanted => \&fileFilter }, $fullPath);
            for my $level (@platformTestHierarchy) {
                my $platformPath = catfile($level, $test);
                find({ preprocess => \&directoryFilter, wanted => \&fileFilter }, $platformPath) if (-d $platformPath);
            }
            push @testsToRun, sort pathcmp @testsFound;
            @testsFound = ();
        } else {
            print "test $test not found\n";
        }
    }

    if (!scalar @ARGV) {
        @testsFound = ();
        find({ preprocess => \&directoryFilter, wanted => \&fileFilter }, $testDirectory);
        for my $level (@platformTestHierarchy) {
            find({ preprocess => \&directoryFilter, wanted => \&fileFilter }, $level);
        }
        push @testsToRun, sort pathcmp @testsFound;
        @testsFound = ();

        # We need to minimize the time when Apache and WebSocketServer is locked by tests
        # so run them last if no explicit order was specified in the argument list.
        my @httpTests;
        my @websocketTests;
        my @otherTests;
        foreach my $test (@testsToRun) {
            if ($test =~ /^http\//) {
                push(@httpTests, $test);
            } elsif ($test =~ /^websocket\//) {
                push(@websocketTests, $test);
            } else {
                push(@otherTests, $test);
            }
        }
        @testsToRun = (@otherTests, @httpTests, @websocketTests);
    }

    # Reverse the tests
    @testsToRun = reverse @testsToRun if $reverseTests;

    # Shuffle the array
    @testsToRun = shuffle(@testsToRun) if $randomizeTests;

    return @testsToRun;
}

sub printResults
{
    my %text = (
        match => "succeeded",
        mismatch => "had incorrect layout",
        new => "were new",
        timedout => "timed out",
        crash => "crashed",
        webProcessCrash => "Web process crashed",
        error => "had stderr output"
    );

    for my $type ("match", "mismatch", "new", "timedout", "crash", "webProcessCrash", "error") {
        my $typeCount = $counts{$type};
        next unless $typeCount;
        my $typeText = $text{$type};
        my $message;
        if ($typeCount == 1) {
            $typeText =~ s/were/was/;
            $message = sprintf "1 test case (%d%%) %s\n", 1 * 100 / $count, $typeText;
        } else {
            $message = sprintf "%d test cases (%d%%) %s\n", $typeCount, $typeCount * 100 / $count, $typeText;
        }
        $message =~ s-\(0%\)-(<1%)-;
        print $message;
    }
}

sub stopRunningTestsEarlyIfNeeded()
{
    # --reset-results does not check pass vs. fail, so exitAfterNFailures makes no sense with --reset-results.
    return 0 if $resetResults;

    my $passCount = $counts{match} || 0; # $counts{match} will be undefined if we've not yet passed a test (e.g. the first test fails).
    my $newCount = $counts{new} || 0;
    my $failureCount = $count - $passCount - $newCount; # "Failure" here includes timeouts, crashes, etc.
    if ($exitAfterNFailures && $failureCount >= $exitAfterNFailures) {
        print "\nExiting early after $failureCount failures. $count tests run.";
        closeDumpTool();
        return 1;
    }

    my $crashCount = $counts{crash} || 0;
    my $webProcessCrashCount = $counts{webProcessCrash} || 0;
    my $timeoutCount = $counts{timedout} || 0;
    if ($exitAfterNCrashesOrTimeouts && $crashCount + $webProcessCrashCount + $timeoutCount >= $exitAfterNCrashesOrTimeouts) {
        print "\nExiting early after $crashCount crashes, $webProcessCrashCount web process crashes, and $timeoutCount timeouts. $count tests run.";
        closeDumpTool();
        return 1;
    }

    return 0;
}

# Store this at global scope so it won't be GCed (and thus unlinked) until the program exits.
my $debuggerTempDirectory;

sub createDebuggerCommandFile()
{
    return unless isCygwin();

    my @commands = (
        '.logopen /t "' . toWindowsPath($testResultsDirectory) . "\\" . $windowsCrashLogFilePrefix . '.txt"',
        '.srcpath "' . toWindowsPath(sourceDir()) . '"',
        '!analyze -vv',
        '~*kpn',
        'q',
    );

    $debuggerTempDirectory = File::Temp->newdir;

    my $commandFile = File::Spec->catfile($debuggerTempDirectory, "debugger-commands.txt");
    unless (open COMMANDS, '>', $commandFile) {
        print "Failed to open $commandFile. Crash logs will not be saved.\n";
        return;
    }
    print COMMANDS join("\n", @commands), "\n";
    unless (close COMMANDS) {
        print "Failed to write to $commandFile. Crash logs will not be saved.\n";
        return;
    }

    return $commandFile;
}

sub readRegistryString($)
{
    my ($valueName) = @_;
    chomp(my $string = `regtool --wow32 get "$valueName"`);
    return $string;
}

sub writeRegistryString($$)
{
    my ($valueName, $string) = @_;

    my $error = system "regtool", "--wow32", "set", "-s", $valueName, $string;

    # On Windows Vista/7 with UAC enabled, regtool will fail to modify the registry, but will still
    # return a successful exit code. So we double-check here that the value we tried to write to the
    # registry was really written.
    return !$error && readRegistryString($valueName) eq $string;
}

sub setUpWindowsCrashLogSaving()
{
    return unless isCygwin();

    unless (defined $ENV{_NT_SYMBOL_PATH}) {
        print "The _NT_SYMBOL_PATH environment variable is not set. Crash logs will not be saved.\nSee <http://trac.webkit.org/wiki/BuildingOnWindows#GettingCrashLogs>.\n";
        return;
    }

    my $ntsdPath = File::Spec->catfile(toCygwinPath($ENV{PROGRAMFILES}), "Debugging Tools for Windows (x86)", "ntsd.exe");
    unless (-f $ntsdPath) {
        $ntsdPath = File::Spec->catfile(toCygwinPath($ENV{SYSTEMROOT}), "system32", "ntsd.exe");
        unless (-f $ntsdPath) {
            print STDERR "Can't find ntsd.exe. Crash logs will not be saved.\nSee <http://trac.webkit.org/wiki/BuildingOnWindows#GettingCrashLogs>.\n";
            return;
        }
    }

    # If we used -c (instead of -cf) we could pass the commands directly on the command line. But
    # when the commands include multiple quoted paths (e.g., for .logopen and .srcpath), Windows
    # fails to invoke the post-mortem debugger at all (perhaps due to a bug in Windows's command
    # line parsing). So we save the commands to a file instead and tell the debugger to execute them
    # using -cf.
    my $commandFile = createDebuggerCommandFile() or return;

    my @options = (
        '-p %ld',
        '-e %ld',
        '-g',
        '-lines',
        '-cf "' . toWindowsPath($commandFile) . '"',
    );

    my %values = (
        Debugger => '"' . toWindowsPath($ntsdPath) . '" ' . join(' ', @options),
        Auto => 1
    );

    foreach my $value (keys %values) {
        $previousWindowsPostMortemDebuggerValues{$value} = readRegistryString("$windowsPostMortemDebuggerKey/$value");
        next if writeRegistryString("$windowsPostMortemDebuggerKey/$value", $values{$value});

        print "Failed to set \"$windowsPostMortemDebuggerKey/$value\". Crash logs will not be saved.\nSee <http://trac.webkit.org/wiki/BuildingOnWindows#GettingCrashLogs>.\n";
        return;
    }

    print "Crash logs will be saved to $testResultsDirectory.\n";
}

END {
    return unless isCygwin();

    foreach my $value (keys %previousWindowsPostMortemDebuggerValues) {
        next if writeRegistryString("$windowsPostMortemDebuggerKey/$value", $previousWindowsPostMortemDebuggerValues{$value});
        print "Failed to restore \"$windowsPostMortemDebuggerKey/$value\" to its previous value \"$previousWindowsPostMortemDebuggerValues{$value}\"\n.";
    }
}