diff --git a/BoardConfig.mk b/BoardConfig.mk
deleted file mode 100644
index 01c6b9d..0000000
--- a/BoardConfig.mk
+++ /dev/null
@@ -1,73 +0,0 @@
-# config.mk
-# 
-# Product-specific compile-time definitions.
-#
-
-TARGET_BOARD_PLATFORM := omap4
-TARGET_NO_BOOTLOADER := true # Uses u-boot instead 
-TARGET_NO_KERNEL := false
-KERNEL_CONFIG := android_omap4_defconfig
-TARGET_USE_UBOOT := true
-UBOOT_CONFIG := omap4_panda_config
-TARGET_USE_XLOADER := false
-XLOADER_CONFIG := omap4430panda_config
-TARGET_NO_RECOVERY := true
-TARGET_NO_RADIOIMAGE := true
-TARGET_PROVIDES_INIT_RC := true
-BOARD_USES_GENERIC_AUDIO := false
-#BOARD_USES_ALSA_AUDIO := false
-BUILD_WITH_ALSA_UTILS := false
-OMAP_ENHANCEMENT := true
-HARDWARE_OMX := false
-USE_CAMERA_STUB := true
-
-BOARD_HAVE_BLUETOOTH := true
-BOARD_HAVE_BLUETOOTH_BCM := true
-
-BOARD_WPA_SUPPLICANT_DRIVER      := WEXT
-WPA_SUPPLICANT_VERSION           := VER_0_8_X
-BOARD_WPA_SUPPLICANT_PRIVATE_LIB := private_lib_driver_cmd
-WIFI_DRIVER_MODULE_PATH          := "/system/modules/wl12xx_sdio.ko"
-WIFI_DRIVER_MODULE_NAME          := "wl12xx_sdio"
-WIFI_FIRMWARE_LOADER             := ""
-
-TARGET_CPU_ABI := armeabi-v7a
-TARGET_CPU_ABI2 := armeabi
-TARGET_CPU_SMP := true
-
-ifdef HARDWARE_OMX
-OMX_VENDOR := ti
-OMX_VENDOR_INCLUDES := \
-   hardware/ti/omx/system/src/openmax_il/omx_core/inc \
-   hardware/ti/omx/image/src/openmax_il/jpeg_enc/inc
-OMX_VENDOR_WRAPPER := TI_OMX_Wrapper
-BOARD_OPENCORE_LIBRARIES := libOMX_Core
-BOARD_OPENCORE_FLAGS := -DHARDWARE_OMX=1
-endif
-
-ifdef OMAP_ENHANCEMENT
-COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT -DTARGET_OMAP4
-endif
-
-# Enable NEON feature
-TARGET_ARCH_VARIANT := armv7-a-neon
-ARCH_ARM_HAVE_TLS_REGISTER := true
-
-EXTRA_PACKAGE_MANAGEMENT := false
-
-TARGET_USERIMAGES_USE_EXT4 := true
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-
-BOARD_EGL_CFG := device/ti/panda/egl.cfg
-
-#BOARD_USES_HGL := true
-#BOARD_USES_OVERLAY := true
-USE_OPENGL_RENDERER := true
-
-# PandaBoard uses an OMAP4 -- Cortex A9
-TARGET_EXTRA_CFLAGS += $(call cc-option,"-march=armv7-a -mtune=cortex-a9",$(call cc-option,"-march=armv7-a -mtune=cortex-a8")) $(call cc-option,"-march=armv7-a -mcpu=cortex-a9",$(call cc-option,"-march=armv7-a -mcpu=cortex-a8"))
-
-# ARMs gator (DS-5)
-TARGET_USE_GATOR:= true
-
-BOARD_USES_TINY_AUDIO_HW := true
diff --git a/README b/README
deleted file mode 100644
index 018ee4c..0000000
--- a/README
+++ /dev/null
@@ -1,31 +0,0 @@
-
-kurt.taylor@linaro.org
-
-What is it:
-===========
-These files add support for the UCM framework via tinyhal for the targeted Linaro development boards. Tinyhal is a replacement Android HAL for audio. For more information, refer to the project page at: http://opensource.wolfsonmicro.com/content/tinyhal
-
-
-To build:
-=========
-These instructions are for integration into the Linaro Android builds. Refer to the Linaro Android page for more information:
-
-http://wiki.linaro.org/Platform/Android
-
-Copy these files to the build tree locations listed, taking care not to overwrite the originals, if you wish to save them.
-
-1) Copy BoardConfig.mk to:
-device/linaro/pandaboard
-
-2) Copy Android.mk and audio_hw.c to:
-device/linaro/pandaboard/audio
-
-
-Now, after successfully building and using linaro-android-media-create to install the Android images onto your SD card, do these steps:
-
-1) On the SD card, if it doesn't already exist, make the directory:
-system/etc/sound 
-
-2) Copy pandaboard.xml to the directory you just created on the SD card:
-system/etc/sound
-