<!-- TinyHAL configuration file for Pandaboard -->
<!-- kurt.taylor@linaro.org -->
<tinyhal>

   <!-- Initially set everything static -->
   <path>
     <!-- # Set SDP device for following cset commands -->
     <!-- cdev "hw:Panda" -->

     <!-- # ABE playback path through DL1 -->
     <ctl name="DL1 Mixer Multimedia" val="1"/>
     <ctl name="Sidetone Mixer Playback" val="1"/>
     <ctl name="DL1 PDM Switch" val="1"/>
     <ctl name="DL1 Media Playback Volume" val="120,120"/>
     <ctl name="SDT DL Volume" val="120"/>

     <!-- # ABE PDM-UL Capture path -->
     <ctl name="MUX_UL00" val="11"/>
     <!-- ctl name="MUX_UL01" val="10"-->

     <!-- # TWL6040 playback path -->
     <ctl name="Headset Left Playback" val="1"/>
     <ctl name="Headset Right Playback" val="1"/>

     <!-- # TWL6040 Capture Path -->
     <ctl name="Analog Left Capture Route" val="0"/>
     <ctl name="Capture Preamplifier Volume" val="2"/>
   </path>

<device name="speaker">
   <path name="on">
     <ctl name="SPK Switch" val="1"/>
   </path>
   <path name="off">
     <ctl name="SPK Switch" val="0"/>
   </path>
</device>

<device name="headphone">
   <path name="on">
     <ctl name="HP Switch" val="1"/>
   </path>
   <path name="off">
     <ctl name="HP Switch" val="0"/>
   </path>
</device>

<device name="earpiece">
   <path name="on">
     <ctl name="EP Switch" val="1"/>
   </path>
   <path name="off">
     <ctl name="EP Switch" val="0"/>
   </path>
</device>

<device name="builtin-mic">
  <path name="on">
     <ctl name="MIXINL IN1L Switch" val="1"/>
  </path>
  <path name="off">
     <ctl name="MIXINL IN1L Switch" val="0"/>
  </path>
</device>

<device name="headset">
  <path name="on">
     <ctl name="MIXINR IN1R Switch" val="1"/>
  </path>
  <path name="off">
     <ctl name="MIXINR IN1R Switch" val="0"/>
  </path>
</device>

</tinyhal>