| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <CoreFoundation/CoreFoundation.h> |
| |
| #include <IOKit/IOKitLib.h> |
| #include <IOKit/IOCFPlugIn.h> |
| #include <IOKit/usb/IOUSBLib.h> |
| #include <IOKit/IOMessage.h> |
| #include <mach/mach_port.h> |
| |
| #include "sysdeps.h" |
| |
| #include <stdio.h> |
| |
| #define TRACE_TAG TRACE_USB |
| #include "adb.h" |
| #include "usb_vendors.h" |
| |
| #define DBG D |
| |
| static IONotificationPortRef notificationPort = 0; |
| static io_iterator_t* notificationIterators; |
| |
| struct usb_handle |
| { |
| UInt8 bulkIn; |
| UInt8 bulkOut; |
| IOUSBInterfaceInterface **interface; |
| io_object_t usbNotification; |
| unsigned int zero_mask; |
| }; |
| |
| static CFRunLoopRef currentRunLoop = 0; |
| static pthread_mutex_t start_lock; |
| static pthread_cond_t start_cond; |
| |
| |
| static void AndroidInterfaceAdded(void *refCon, io_iterator_t iterator); |
| static void AndroidInterfaceNotify(void *refCon, io_iterator_t iterator, |
| natural_t messageType, |
| void *messageArgument); |
| static usb_handle* CheckInterface(IOUSBInterfaceInterface **iface, |
| UInt16 vendor, UInt16 product); |
| |
| static int |
| InitUSB() |
| { |
| CFMutableDictionaryRef matchingDict; |
| CFRunLoopSourceRef runLoopSource; |
| SInt32 vendor, if_subclass, if_protocol; |
| unsigned i; |
| |
| //* To set up asynchronous notifications, create a notification port and |
| //* add its run loop event source to the program's run loop |
| notificationPort = IONotificationPortCreate(kIOMasterPortDefault); |
| runLoopSource = IONotificationPortGetRunLoopSource(notificationPort); |
| CFRunLoopAddSource(CFRunLoopGetCurrent(), runLoopSource, kCFRunLoopDefaultMode); |
| |
| memset(notificationIterators, 0, sizeof(notificationIterators)); |
| |
| //* loop through all supported vendors |
| for (i = 0; i < vendorIdCount; i++) { |
| //* Create our matching dictionary to find the Android device's |
| //* adb interface |
| //* IOServiceAddMatchingNotification consumes the reference, so we do |
| //* not need to release this |
| matchingDict = IOServiceMatching(kIOUSBInterfaceClassName); |
| |
| if (!matchingDict) { |
| DBG("ERR: Couldn't create USB matching dictionary.\n"); |
| return -1; |
| } |
| |
| //* Match based on vendor id, interface subclass and protocol |
| vendor = vendorIds[i]; |
| if_subclass = ADB_SUBCLASS; |
| if_protocol = ADB_PROTOCOL; |
| CFDictionarySetValue(matchingDict, CFSTR(kUSBVendorID), |
| CFNumberCreate(kCFAllocatorDefault, |
| kCFNumberSInt32Type, &vendor)); |
| CFDictionarySetValue(matchingDict, CFSTR(kUSBInterfaceSubClass), |
| CFNumberCreate(kCFAllocatorDefault, |
| kCFNumberSInt32Type, &if_subclass)); |
| CFDictionarySetValue(matchingDict, CFSTR(kUSBInterfaceProtocol), |
| CFNumberCreate(kCFAllocatorDefault, |
| kCFNumberSInt32Type, &if_protocol)); |
| IOServiceAddMatchingNotification( |
| notificationPort, |
| kIOFirstMatchNotification, |
| matchingDict, |
| AndroidInterfaceAdded, |
| NULL, |
| ¬ificationIterators[i]); |
| |
| //* Iterate over set of matching interfaces to access already-present |
| //* devices and to arm the notification |
| AndroidInterfaceAdded(NULL, notificationIterators[i]); |
| } |
| |
| return 0; |
| } |
| |
| static void |
| AndroidInterfaceAdded(void *refCon, io_iterator_t iterator) |
| { |
| kern_return_t kr; |
| io_service_t usbDevice; |
| io_service_t usbInterface; |
| IOCFPlugInInterface **plugInInterface = NULL; |
| IOUSBInterfaceInterface220 **iface = NULL; |
| IOUSBDeviceInterface197 **dev = NULL; |
| HRESULT result; |
| SInt32 score; |
| UInt32 locationId; |
| UInt16 vendor; |
| UInt16 product; |
| UInt8 serialIndex; |
| char serial[256]; |
| char devpathBuf[64]; |
| char *devpath = NULL; |
| |
| while ((usbInterface = IOIteratorNext(iterator))) { |
| //* Create an intermediate interface plugin |
| kr = IOCreatePlugInInterfaceForService(usbInterface, |
| kIOUSBInterfaceUserClientTypeID, |
| kIOCFPlugInInterfaceID, |
| &plugInInterface, &score); |
| IOObjectRelease(usbInterface); |
| if ((kIOReturnSuccess != kr) || (!plugInInterface)) { |
| DBG("ERR: Unable to create an interface plug-in (%08x)\n", kr); |
| continue; |
| } |
| |
| //* This gets us the interface object |
| result = (*plugInInterface)->QueryInterface(plugInInterface, |
| CFUUIDGetUUIDBytes(kIOUSBInterfaceInterfaceID), (LPVOID) |
| &iface); |
| //* We only needed the plugin to get the interface, so discard it |
| (*plugInInterface)->Release(plugInInterface); |
| if (result || !iface) { |
| DBG("ERR: Couldn't query the interface (%08x)\n", (int) result); |
| continue; |
| } |
| |
| //* this gets us an ioservice, with which we will find the actual |
| //* device; after getting a plugin, and querying the interface, of |
| //* course. |
| //* Gotta love OS X |
| kr = (*iface)->GetDevice(iface, &usbDevice); |
| if (kIOReturnSuccess != kr || !usbDevice) { |
| DBG("ERR: Couldn't grab device from interface (%08x)\n", kr); |
| continue; |
| } |
| |
| plugInInterface = NULL; |
| score = 0; |
| //* create an intermediate device plugin |
| kr = IOCreatePlugInInterfaceForService(usbDevice, |
| kIOUSBDeviceUserClientTypeID, |
| kIOCFPlugInInterfaceID, |
| &plugInInterface, &score); |
| //* only needed this to find the plugin |
| (void)IOObjectRelease(usbDevice); |
| if ((kIOReturnSuccess != kr) || (!plugInInterface)) { |
| DBG("ERR: Unable to create a device plug-in (%08x)\n", kr); |
| continue; |
| } |
| |
| result = (*plugInInterface)->QueryInterface(plugInInterface, |
| CFUUIDGetUUIDBytes(kIOUSBDeviceInterfaceID), (LPVOID) &dev); |
| //* only needed this to query the plugin |
| (*plugInInterface)->Release(plugInInterface); |
| if (result || !dev) { |
| DBG("ERR: Couldn't create a device interface (%08x)\n", |
| (int) result); |
| continue; |
| } |
| |
| //* Now after all that, we actually have a ref to the device and |
| //* the interface that matched our criteria |
| |
| kr = (*dev)->GetDeviceVendor(dev, &vendor); |
| kr = (*dev)->GetDeviceProduct(dev, &product); |
| kr = (*dev)->GetLocationID(dev, &locationId); |
| if (kr == 0) { |
| snprintf(devpathBuf, sizeof(devpathBuf), "usb:%lX", locationId); |
| devpath = devpathBuf; |
| } |
| kr = (*dev)->USBGetSerialNumberStringIndex(dev, &serialIndex); |
| |
| if (serialIndex > 0) { |
| IOUSBDevRequest req; |
| UInt16 buffer[256]; |
| UInt16 languages[128]; |
| |
| memset(languages, 0, sizeof(languages)); |
| |
| req.bmRequestType = |
| USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice); |
| req.bRequest = kUSBRqGetDescriptor; |
| req.wValue = (kUSBStringDesc << 8) | 0; |
| req.wIndex = 0; |
| req.pData = languages; |
| req.wLength = sizeof(languages); |
| kr = (*dev)->DeviceRequest(dev, &req); |
| |
| if (kr == kIOReturnSuccess && req.wLenDone > 0) { |
| |
| int langCount = (req.wLenDone - 2) / 2, lang; |
| |
| for (lang = 1; lang <= langCount; lang++) { |
| |
| memset(buffer, 0, sizeof(buffer)); |
| memset(&req, 0, sizeof(req)); |
| |
| req.bmRequestType = |
| USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice); |
| req.bRequest = kUSBRqGetDescriptor; |
| req.wValue = (kUSBStringDesc << 8) | serialIndex; |
| req.wIndex = languages[lang]; |
| req.pData = buffer; |
| req.wLength = sizeof(buffer); |
| kr = (*dev)->DeviceRequest(dev, &req); |
| |
| if (kr == kIOReturnSuccess && req.wLenDone > 0) { |
| int i, count; |
| |
| // skip first word, and copy the rest to the serial string, |
| // changing shorts to bytes. |
| count = (req.wLenDone - 1) / 2; |
| for (i = 0; i < count; i++) |
| serial[i] = buffer[i + 1]; |
| serial[i] = 0; |
| break; |
| } |
| } |
| } |
| } |
| (*dev)->Release(dev); |
| |
| DBG("INFO: Found vid=%04x pid=%04x serial=%s\n", vendor, product, |
| serial); |
| |
| usb_handle* handle = CheckInterface((IOUSBInterfaceInterface**)iface, |
| vendor, product); |
| if (handle == NULL) { |
| DBG("ERR: Could not find device interface: %08x\n", kr); |
| (*iface)->Release(iface); |
| continue; |
| } |
| |
| DBG("AndroidDeviceAdded calling register_usb_transport\n"); |
| register_usb_transport(handle, (serial[0] ? serial : NULL), devpath, 1); |
| |
| // Register for an interest notification of this device being removed. |
| // Pass the reference to our private data as the refCon for the |
| // notification. |
| kr = IOServiceAddInterestNotification(notificationPort, |
| usbInterface, |
| kIOGeneralInterest, |
| AndroidInterfaceNotify, |
| handle, |
| &handle->usbNotification); |
| |
| if (kIOReturnSuccess != kr) { |
| DBG("ERR: Unable to create interest notification (%08x)\n", kr); |
| } |
| } |
| } |
| |
| static void |
| AndroidInterfaceNotify(void *refCon, io_service_t service, natural_t messageType, void *messageArgument) |
| { |
| usb_handle *handle = (usb_handle *)refCon; |
| |
| if (messageType == kIOMessageServiceIsTerminated) { |
| if (!handle) { |
| DBG("ERR: NULL handle\n"); |
| return; |
| } |
| DBG("AndroidInterfaceNotify\n"); |
| IOObjectRelease(handle->usbNotification); |
| usb_kick(handle); |
| } |
| } |
| |
| //* TODO: simplify this further since we only register to get ADB interface |
| //* subclass+protocol events |
| static usb_handle* |
| CheckInterface(IOUSBInterfaceInterface **interface, UInt16 vendor, UInt16 product) |
| { |
| usb_handle* handle = NULL; |
| IOReturn kr; |
| UInt8 interfaceNumEndpoints, interfaceClass, interfaceSubClass, interfaceProtocol; |
| UInt8 endpoint; |
| |
| |
| //* Now open the interface. This will cause the pipes associated with |
| //* the endpoints in the interface descriptor to be instantiated |
| kr = (*interface)->USBInterfaceOpen(interface); |
| if (kr != kIOReturnSuccess) { |
| DBG("ERR: Could not open interface: (%08x)\n", kr); |
| return NULL; |
| } |
| |
| //* Get the number of endpoints associated with this interface |
| kr = (*interface)->GetNumEndpoints(interface, &interfaceNumEndpoints); |
| if (kr != kIOReturnSuccess) { |
| DBG("ERR: Unable to get number of endpoints: (%08x)\n", kr); |
| goto err_get_num_ep; |
| } |
| |
| //* Get interface class, subclass and protocol |
| if ((*interface)->GetInterfaceClass(interface, &interfaceClass) != kIOReturnSuccess || |
| (*interface)->GetInterfaceSubClass(interface, &interfaceSubClass) != kIOReturnSuccess || |
| (*interface)->GetInterfaceProtocol(interface, &interfaceProtocol) != kIOReturnSuccess) { |
| DBG("ERR: Unable to get interface class, subclass and protocol\n"); |
| goto err_get_interface_class; |
| } |
| |
| //* check to make sure interface class, subclass and protocol match ADB |
| //* avoid opening mass storage endpoints |
| if (!is_adb_interface(vendor, product, interfaceClass, |
| interfaceSubClass, interfaceProtocol)) |
| goto err_bad_adb_interface; |
| |
| handle = calloc(1, sizeof(usb_handle)); |
| |
| //* Iterate over the endpoints for this interface and find the first |
| //* bulk in/out pipes available. These will be our read/write pipes. |
| for (endpoint = 0; endpoint <= interfaceNumEndpoints; endpoint++) { |
| UInt8 transferType; |
| UInt16 maxPacketSize; |
| UInt8 interval; |
| UInt8 number; |
| UInt8 direction; |
| |
| kr = (*interface)->GetPipeProperties(interface, endpoint, &direction, |
| &number, &transferType, &maxPacketSize, &interval); |
| |
| if (kIOReturnSuccess == kr) { |
| if (kUSBBulk != transferType) |
| continue; |
| |
| if (kUSBIn == direction) |
| handle->bulkIn = endpoint; |
| |
| if (kUSBOut == direction) |
| handle->bulkOut = endpoint; |
| |
| handle->zero_mask = maxPacketSize - 1; |
| } else { |
| DBG("ERR: FindDeviceInterface - could not get pipe properties\n"); |
| goto err_get_pipe_props; |
| } |
| } |
| |
| handle->interface = interface; |
| return handle; |
| |
| err_get_pipe_props: |
| free(handle); |
| err_bad_adb_interface: |
| err_get_interface_class: |
| err_get_num_ep: |
| (*interface)->USBInterfaceClose(interface); |
| return NULL; |
| } |
| |
| |
| void* RunLoopThread(void* unused) |
| { |
| unsigned i; |
| |
| InitUSB(); |
| |
| currentRunLoop = CFRunLoopGetCurrent(); |
| |
| // Signal the parent that we are running |
| adb_mutex_lock(&start_lock); |
| adb_cond_signal(&start_cond); |
| adb_mutex_unlock(&start_lock); |
| |
| CFRunLoopRun(); |
| currentRunLoop = 0; |
| |
| for (i = 0; i < vendorIdCount; i++) { |
| IOObjectRelease(notificationIterators[i]); |
| } |
| IONotificationPortDestroy(notificationPort); |
| |
| DBG("RunLoopThread done\n"); |
| return NULL; |
| } |
| |
| |
| static int initialized = 0; |
| void usb_init() |
| { |
| if (!initialized) |
| { |
| adb_thread_t tid; |
| |
| notificationIterators = (io_iterator_t*)malloc( |
| vendorIdCount * sizeof(io_iterator_t)); |
| |
| adb_mutex_init(&start_lock, NULL); |
| adb_cond_init(&start_cond, NULL); |
| |
| if(adb_thread_create(&tid, RunLoopThread, NULL)) |
| fatal_errno("cannot create input thread"); |
| |
| // Wait for initialization to finish |
| adb_mutex_lock(&start_lock); |
| adb_cond_wait(&start_cond, &start_lock); |
| adb_mutex_unlock(&start_lock); |
| |
| adb_mutex_destroy(&start_lock); |
| adb_cond_destroy(&start_cond); |
| |
| initialized = 1; |
| } |
| } |
| |
| void usb_cleanup() |
| { |
| DBG("usb_cleanup\n"); |
| close_usb_devices(); |
| if (currentRunLoop) |
| CFRunLoopStop(currentRunLoop); |
| |
| if (notificationIterators != NULL) { |
| free(notificationIterators); |
| notificationIterators = NULL; |
| } |
| } |
| |
| int usb_write(usb_handle *handle, const void *buf, int len) |
| { |
| IOReturn result; |
| |
| if (!len) |
| return 0; |
| |
| if (!handle) |
| return -1; |
| |
| if (NULL == handle->interface) { |
| DBG("ERR: usb_write interface was null\n"); |
| return -1; |
| } |
| |
| if (0 == handle->bulkOut) { |
| DBG("ERR: bulkOut endpoint not assigned\n"); |
| return -1; |
| } |
| |
| result = |
| (*handle->interface)->WritePipe( |
| handle->interface, handle->bulkOut, (void *)buf, len); |
| |
| if ((result == 0) && (handle->zero_mask)) { |
| /* we need 0-markers and our transfer */ |
| if(!(len & handle->zero_mask)) { |
| result = |
| (*handle->interface)->WritePipe( |
| handle->interface, handle->bulkOut, (void *)buf, 0); |
| } |
| } |
| |
| if (0 == result) |
| return 0; |
| |
| DBG("ERR: usb_write failed with status %d\n", result); |
| return -1; |
| } |
| |
| int usb_read(usb_handle *handle, void *buf, int len) |
| { |
| IOReturn result; |
| UInt32 numBytes = len; |
| |
| if (!len) { |
| return 0; |
| } |
| |
| if (!handle) { |
| return -1; |
| } |
| |
| if (NULL == handle->interface) { |
| DBG("ERR: usb_read interface was null\n"); |
| return -1; |
| } |
| |
| if (0 == handle->bulkIn) { |
| DBG("ERR: bulkIn endpoint not assigned\n"); |
| return -1; |
| } |
| |
| result = |
| (*handle->interface)->ReadPipe(handle->interface, |
| handle->bulkIn, buf, &numBytes); |
| |
| if (0 == result) |
| return 0; |
| else { |
| DBG("ERR: usb_read failed with status %d\n", result); |
| } |
| |
| return -1; |
| } |
| |
| int usb_close(usb_handle *handle) |
| { |
| return 0; |
| } |
| |
| void usb_kick(usb_handle *handle) |
| { |
| /* release the interface */ |
| if (!handle) |
| return; |
| |
| if (handle->interface) |
| { |
| (*handle->interface)->USBInterfaceClose(handle->interface); |
| (*handle->interface)->Release(handle->interface); |
| handle->interface = 0; |
| } |
| } |