| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Add to readline cmdline-editing by |
| * (C) Copyright 2005 |
| * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* #define DEBUG */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <malloc.h> |
| #include <version.h> |
| #ifdef CONFIG_MODEM_SUPPORT |
| #include <malloc.h> /* for free() prototype */ |
| #endif |
| |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| #include <hush.h> |
| #endif |
| |
| #include <post.h> |
| #include <linux/ctype.h> |
| #include <menu.h> |
| |
| #if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST) || defined(CONFIG_CMDLINE_EDITING) |
| DECLARE_GLOBAL_DATA_PTR; |
| #endif |
| |
| /* |
| * Board-specific Platform code can reimplement show_boot_progress () if needed |
| */ |
| void inline __show_boot_progress (int val) {} |
| void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress"))); |
| |
| #if defined(CONFIG_UPDATE_TFTP) |
| int update_tftp (ulong addr); |
| #endif /* CONFIG_UPDATE_TFTP */ |
| |
| #define MAX_DELAY_STOP_STR 32 |
| |
| #undef DEBUG_PARSER |
| |
| char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */ |
| |
| static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen); |
| static const char erase_seq[] = "\b \b"; /* erase sequence */ |
| static const char tab_seq[] = " "; /* used to expand TABs */ |
| |
| static uint64_t endtime = 0; /* must be set, default is instant timeout */ |
| static int retry_time = -1; /* -1 so can call readline before main_loop */ |
| |
| #define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk()) |
| |
| #ifndef CONFIG_BOOT_RETRY_MIN |
| #define CONFIG_BOOT_RETRY_MIN CONFIG_BOOT_RETRY_TIME |
| #endif |
| |
| #ifdef CONFIG_MODEM_SUPPORT |
| int do_mdm_init = 0; |
| extern void mdm_init(void); /* defined in board.c */ |
| #endif |
| |
| int wait_for_ch_timeout(int rel_timeout, uint64_t abs_timeout) |
| { |
| uint64_t etime = abs_timeout; |
| |
| if (rel_timeout) |
| etime = endtick(rel_timeout); |
| |
| while (!tstc()) { /* while no incoming data */ |
| if ((retry_time >= 0) && etime && (get_ticks() > etime)) |
| return (-2); /* timed out */ |
| WATCHDOG_RESET(); |
| } |
| return 0; |
| } |
| /*************************************************************************** |
| * Watch for 'delay' seconds for autoboot stop or autoboot delay string. |
| * returns: 0 - no key string, allow autoboot 1 - got key string, abort |
| */ |
| #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) |
| # if defined(CONFIG_AUTOBOOT_KEYED) |
| #ifndef CONFIG_MENU |
| static inline |
| #endif |
| int abortboot(int bootdelay) |
| { |
| int abort = 0; |
| uint64_t etime = endtick(bootdelay); |
| struct { |
| char* str; |
| u_int len; |
| int retry; |
| } |
| delaykey [] = { |
| { str: getenv ("bootdelaykey"), retry: 1 }, |
| { str: getenv ("bootdelaykey2"), retry: 1 }, |
| { str: getenv ("bootstopkey"), retry: 0 }, |
| { str: getenv ("bootstopkey2"), retry: 0 }, |
| }; |
| |
| char presskey [MAX_DELAY_STOP_STR]; |
| u_int presskey_len = 0; |
| u_int presskey_max = 0; |
| u_int i; |
| |
| #ifndef CONFIG_ZERO_BOOTDELAY_CHECK |
| if (bootdelay == 0) |
| return 0; |
| #endif |
| |
| # ifdef CONFIG_AUTOBOOT_PROMPT |
| printf(CONFIG_AUTOBOOT_PROMPT); |
| # endif |
| |
| # ifdef CONFIG_AUTOBOOT_DELAY_STR |
| if (delaykey[0].str == NULL) |
| delaykey[0].str = CONFIG_AUTOBOOT_DELAY_STR; |
| # endif |
| # ifdef CONFIG_AUTOBOOT_DELAY_STR2 |
| if (delaykey[1].str == NULL) |
| delaykey[1].str = CONFIG_AUTOBOOT_DELAY_STR2; |
| # endif |
| # ifdef CONFIG_AUTOBOOT_STOP_STR |
| if (delaykey[2].str == NULL) |
| delaykey[2].str = CONFIG_AUTOBOOT_STOP_STR; |
| # endif |
| # ifdef CONFIG_AUTOBOOT_STOP_STR2 |
| if (delaykey[3].str == NULL) |
| delaykey[3].str = CONFIG_AUTOBOOT_STOP_STR2; |
| # endif |
| |
| for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { |
| delaykey[i].len = delaykey[i].str == NULL ? |
| 0 : strlen (delaykey[i].str); |
| delaykey[i].len = delaykey[i].len > MAX_DELAY_STOP_STR ? |
| MAX_DELAY_STOP_STR : delaykey[i].len; |
| |
| presskey_max = presskey_max > delaykey[i].len ? |
| presskey_max : delaykey[i].len; |
| |
| # if DEBUG_BOOTKEYS |
| printf("%s key:<%s>\n", |
| delaykey[i].retry ? "delay" : "stop", |
| delaykey[i].str ? delaykey[i].str : "NULL"); |
| # endif |
| } |
| |
| /* In order to keep up with incoming data, check timeout only |
| * when catch up. |
| */ |
| do { |
| if (tstc()) { |
| if (presskey_len < presskey_max) { |
| presskey [presskey_len ++] = getc(); |
| } |
| else { |
| for (i = 0; i < presskey_max - 1; i ++) |
| presskey [i] = presskey [i + 1]; |
| |
| presskey [i] = getc(); |
| } |
| } |
| |
| for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { |
| if (delaykey[i].len > 0 && |
| presskey_len >= delaykey[i].len && |
| memcmp (presskey + presskey_len - delaykey[i].len, |
| delaykey[i].str, |
| delaykey[i].len) == 0) { |
| # if DEBUG_BOOTKEYS |
| printf("got %skey\n", |
| delaykey[i].retry ? "delay" : "stop"); |
| # endif |
| |
| # ifdef CONFIG_BOOT_RETRY_TIME |
| /* don't retry auto boot */ |
| if (! delaykey[i].retry) |
| retry_time = -1; |
| # endif |
| abort = 1; |
| } |
| } |
| } while (!abort && get_ticks() <= etime); |
| |
| # if DEBUG_BOOTKEYS |
| if (!abort) |
| puts("key timeout\n"); |
| # endif |
| |
| #ifdef CONFIG_SILENT_CONSOLE |
| if (abort) |
| gd->flags &= ~GD_FLG_SILENT; |
| #endif |
| |
| return abort; |
| } |
| |
| # else /* !defined(CONFIG_AUTOBOOT_KEYED) */ |
| |
| #ifdef CONFIG_MENUKEY |
| static int menukey = 0; |
| #endif |
| |
| #ifndef CONFIG_MENU |
| static inline |
| #endif |
| int abortboot(int bootdelay) |
| { |
| int abort = 0; |
| |
| #ifdef CONFIG_MENUPROMPT |
| printf(CONFIG_MENUPROMPT); |
| #else |
| if (bootdelay >= 0) |
| printf("Hit any key to stop autoboot: %2d ", bootdelay); |
| #endif |
| |
| #if defined CONFIG_ZERO_BOOTDELAY_CHECK |
| /* |
| * Check if key already pressed |
| * Don't check if bootdelay < 0 |
| */ |
| if (bootdelay >= 0) { |
| if (tstc()) { /* we got a key press */ |
| (void) getc(); /* consume input */ |
| puts ("\b\b\b 0"); |
| abort = 1; /* don't auto boot */ |
| } |
| } |
| #endif |
| |
| while ((bootdelay > 0) && (!abort)) { |
| int i; |
| |
| --bootdelay; |
| /* delay 100 * 10ms */ |
| for (i=0; !abort && i<100; ++i) { |
| if (tstc()) { /* we got a key press */ |
| abort = 1; /* don't auto boot */ |
| bootdelay = 0; /* no more delay */ |
| # ifdef CONFIG_MENUKEY |
| menukey = getc(); |
| # else |
| (void) getc(); /* consume input */ |
| # endif |
| break; |
| } |
| udelay(10000); |
| } |
| |
| printf("\b\b\b%2d ", bootdelay); |
| } |
| |
| putc('\n'); |
| |
| #ifdef CONFIG_SILENT_CONSOLE |
| if (abort) |
| gd->flags &= ~GD_FLG_SILENT; |
| #endif |
| |
| return abort; |
| } |
| # endif /* CONFIG_AUTOBOOT_KEYED */ |
| #endif /* CONFIG_BOOTDELAY >= 0 */ |
| |
| /****************************************************************************/ |
| |
| void main_loop (void) |
| { |
| #ifndef CONFIG_SYS_HUSH_PARSER |
| static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, }; |
| int len; |
| int rc = 1; |
| int flag; |
| #endif |
| |
| #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) |
| char *s; |
| int bootdelay; |
| #endif |
| #ifdef CONFIG_PREBOOT |
| char *p; |
| #endif |
| #ifdef CONFIG_BOOTCOUNT_LIMIT |
| unsigned long bootcount = 0; |
| unsigned long bootlimit = 0; |
| char *bcs; |
| char bcs_set[16]; |
| #endif /* CONFIG_BOOTCOUNT_LIMIT */ |
| |
| #ifdef CONFIG_BOOTCOUNT_LIMIT |
| bootcount = bootcount_load(); |
| bootcount++; |
| bootcount_store (bootcount); |
| sprintf (bcs_set, "%lu", bootcount); |
| setenv ("bootcount", bcs_set); |
| bcs = getenv ("bootlimit"); |
| bootlimit = bcs ? simple_strtoul (bcs, NULL, 10) : 0; |
| #endif /* CONFIG_BOOTCOUNT_LIMIT */ |
| |
| #ifdef CONFIG_MODEM_SUPPORT |
| debug ("DEBUG: main_loop: do_mdm_init=%d\n", do_mdm_init); |
| if (do_mdm_init) { |
| char *str = strdup(getenv("mdm_cmd")); |
| setenv ("preboot", str); /* set or delete definition */ |
| if (str != NULL) |
| free (str); |
| mdm_init(); /* wait for modem connection */ |
| } |
| #endif /* CONFIG_MODEM_SUPPORT */ |
| |
| #ifdef CONFIG_VERSION_VARIABLE |
| { |
| setenv ("ver", version_string); /* set version variable */ |
| } |
| #endif /* CONFIG_VERSION_VARIABLE */ |
| |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| u_boot_hush_start (); |
| #endif |
| |
| #if defined(CONFIG_HUSH_INIT_VAR) |
| hush_init_var (); |
| #endif |
| |
| #ifdef CONFIG_PREBOOT |
| if ((p = getenv ("preboot")) != NULL) { |
| # ifdef CONFIG_AUTOBOOT_KEYED |
| int prev = disable_ctrlc(1); /* disable Control C checking */ |
| # endif |
| |
| run_command_list(p, -1, 0); |
| |
| # ifdef CONFIG_AUTOBOOT_KEYED |
| disable_ctrlc(prev); /* restore Control C checking */ |
| # endif |
| } |
| #endif /* CONFIG_PREBOOT */ |
| |
| #if defined(CONFIG_UPDATE_TFTP) |
| update_tftp (0UL); |
| #endif /* CONFIG_UPDATE_TFTP */ |
| |
| #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) |
| s = getenv ("bootdelay"); |
| bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; |
| |
| debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay); |
| |
| #if defined(CONFIG_MENU_SHOW) |
| bootdelay = menu_show(bootdelay); |
| #endif |
| # ifdef CONFIG_BOOT_RETRY_TIME |
| init_cmd_timeout (); |
| # endif /* CONFIG_BOOT_RETRY_TIME */ |
| |
| #ifdef CONFIG_POST |
| if (gd->flags & GD_FLG_POSTFAIL) { |
| s = getenv("failbootcmd"); |
| } |
| else |
| #endif /* CONFIG_POST */ |
| #ifdef CONFIG_BOOTCOUNT_LIMIT |
| if (bootlimit && (bootcount > bootlimit)) { |
| printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n", |
| (unsigned)bootlimit); |
| s = getenv ("altbootcmd"); |
| } |
| else |
| #endif /* CONFIG_BOOTCOUNT_LIMIT */ |
| s = getenv ("bootcmd"); |
| |
| debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); |
| |
| if (bootdelay != -1 && s && !abortboot(bootdelay)) { |
| # ifdef CONFIG_AUTOBOOT_KEYED |
| int prev = disable_ctrlc(1); /* disable Control C checking */ |
| # endif |
| |
| run_command_list(s, -1, 0); |
| |
| # ifdef CONFIG_AUTOBOOT_KEYED |
| disable_ctrlc(prev); /* restore Control C checking */ |
| # endif |
| } |
| |
| # ifdef CONFIG_MENUKEY |
| if (menukey == CONFIG_MENUKEY) { |
| s = getenv("menucmd"); |
| if (s) |
| run_command_list(s, -1, 0); |
| } |
| #endif /* CONFIG_MENUKEY */ |
| #endif /* CONFIG_BOOTDELAY */ |
| |
| /* |
| * Main Loop for Monitor Command Processing |
| */ |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| parse_file_outer(); |
| /* This point is never reached */ |
| for (;;); |
| #else |
| for (;;) { |
| #ifdef CONFIG_BOOT_RETRY_TIME |
| if (rc >= 0) { |
| /* Saw enough of a valid command to |
| * restart the timeout. |
| */ |
| reset_cmd_timeout(); |
| } |
| #endif |
| len = readline (CONFIG_SYS_PROMPT); |
| |
| flag = 0; /* assume no special flags for now */ |
| if (len > 0) |
| strcpy (lastcommand, console_buffer); |
| else if (len == 0) |
| flag |= CMD_FLAG_REPEAT; |
| #ifdef CONFIG_BOOT_RETRY_TIME |
| else if (len == -2) { |
| /* -2 means timed out, retry autoboot |
| */ |
| puts ("\nTimed out waiting for command\n"); |
| # ifdef CONFIG_RESET_TO_RETRY |
| /* Reinit board to run initialization code again */ |
| do_reset (NULL, 0, 0, NULL); |
| # else |
| return; /* retry autoboot */ |
| # endif |
| } |
| #endif |
| |
| if (len == -1) |
| puts ("<INTERRUPT>\n"); |
| else |
| rc = run_command(lastcommand, flag); |
| |
| if (rc <= 0) { |
| /* invalid command or not repeatable, forget it */ |
| lastcommand[0] = 0; |
| } |
| } |
| #endif /*CONFIG_SYS_HUSH_PARSER*/ |
| } |
| |
| #ifdef CONFIG_BOOT_RETRY_TIME |
| /*************************************************************************** |
| * initialize command line timeout |
| */ |
| void init_cmd_timeout(void) |
| { |
| char *s = getenv ("bootretry"); |
| |
| if (s != NULL) |
| retry_time = (int)simple_strtol(s, NULL, 10); |
| else |
| retry_time = CONFIG_BOOT_RETRY_TIME; |
| |
| if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN) |
| retry_time = CONFIG_BOOT_RETRY_MIN; |
| } |
| |
| /*************************************************************************** |
| * reset command line timeout to retry_time seconds |
| */ |
| void reset_cmd_timeout(void) |
| { |
| endtime = endtick(retry_time); |
| } |
| #endif |
| |
| #ifdef CONFIG_CMDLINE_EDITING |
| |
| /* |
| * cmdline-editing related codes from vivi. |
| * Author: Janghoon Lyu <nandy@mizi.com> |
| */ |
| |
| #define putnstr(str,n) do { \ |
| printf ("%.*s", (int)n, str); \ |
| } while (0) |
| |
| #define CTL_CH(c) ((c) - 'a' + 1) |
| #define CTL_BACKSPACE ('\b') |
| #define DEL ((char)255) |
| #define DEL7 ((char)127) |
| #define CREAD_HIST_CHAR ('!') |
| |
| #define getcmd_putch(ch) putc(ch) |
| #define getcmd_getch() getc() |
| #define getcmd_cbeep() getcmd_putch('\a') |
| |
| #define HIST_MAX 20 |
| #define HIST_SIZE CONFIG_SYS_CBSIZE |
| |
| static int hist_max; |
| static int hist_add_idx; |
| static int hist_cur = -1; |
| static unsigned hist_num; |
| |
| static char *hist_list[HIST_MAX]; |
| static char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ |
| |
| #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) |
| |
| static void hist_init(void) |
| { |
| int i; |
| |
| hist_max = 0; |
| hist_add_idx = 0; |
| hist_cur = -1; |
| hist_num = 0; |
| |
| for (i = 0; i < HIST_MAX; i++) { |
| hist_list[i] = hist_lines[i]; |
| hist_list[i][0] = '\0'; |
| } |
| } |
| |
| static void cread_add_to_hist(char *line) |
| { |
| strcpy(hist_list[hist_add_idx], line); |
| |
| if (++hist_add_idx >= HIST_MAX) |
| hist_add_idx = 0; |
| |
| if (hist_add_idx > hist_max) |
| hist_max = hist_add_idx; |
| |
| hist_num++; |
| } |
| |
| static char* hist_prev(void) |
| { |
| char *ret; |
| int old_cur; |
| |
| if (hist_cur < 0) |
| return NULL; |
| |
| old_cur = hist_cur; |
| if (--hist_cur < 0) |
| hist_cur = hist_max; |
| |
| if (hist_cur == hist_add_idx) { |
| hist_cur = old_cur; |
| ret = NULL; |
| } else |
| ret = hist_list[hist_cur]; |
| |
| return (ret); |
| } |
| |
| static char* hist_next(void) |
| { |
| char *ret; |
| |
| if (hist_cur < 0) |
| return NULL; |
| |
| if (hist_cur == hist_add_idx) |
| return NULL; |
| |
| if (++hist_cur > hist_max) |
| hist_cur = 0; |
| |
| if (hist_cur == hist_add_idx) { |
| ret = ""; |
| } else |
| ret = hist_list[hist_cur]; |
| |
| return (ret); |
| } |
| |
| #ifndef CONFIG_CMDLINE_EDITING |
| static void cread_print_hist_list(void) |
| { |
| int i; |
| unsigned long n; |
| |
| n = hist_num - hist_max; |
| |
| i = hist_add_idx + 1; |
| while (1) { |
| if (i > hist_max) |
| i = 0; |
| if (i == hist_add_idx) |
| break; |
| printf("%s\n", hist_list[i]); |
| n++; |
| i++; |
| } |
| } |
| #endif /* CONFIG_CMDLINE_EDITING */ |
| |
| #define BEGINNING_OF_LINE() { \ |
| while (num) { \ |
| getcmd_putch(CTL_BACKSPACE); \ |
| num--; \ |
| } \ |
| } |
| |
| #define ERASE_TO_EOL() { \ |
| if (num < eol_num) { \ |
| printf("%*s", (int)(eol_num - num), ""); \ |
| do { \ |
| getcmd_putch(CTL_BACKSPACE); \ |
| } while (--eol_num > num); \ |
| } \ |
| } |
| |
| #define REFRESH_TO_EOL() { \ |
| if (num < eol_num) { \ |
| wlen = eol_num - num; \ |
| putnstr(buf + num, wlen); \ |
| num = eol_num; \ |
| } \ |
| } |
| |
| static void cread_add_char(char ichar, int insert, unsigned long *num, |
| unsigned long *eol_num, char *buf, unsigned long len) |
| { |
| unsigned long wlen; |
| |
| /* room ??? */ |
| if (insert || *num == *eol_num) { |
| if (*eol_num > len - 1) { |
| getcmd_cbeep(); |
| return; |
| } |
| (*eol_num)++; |
| } |
| |
| if (insert) { |
| wlen = *eol_num - *num; |
| if (wlen > 1) { |
| memmove(&buf[*num+1], &buf[*num], wlen-1); |
| } |
| |
| buf[*num] = ichar; |
| putnstr(buf + *num, wlen); |
| (*num)++; |
| while (--wlen) { |
| getcmd_putch(CTL_BACKSPACE); |
| } |
| } else { |
| /* echo the character */ |
| wlen = 1; |
| buf[*num] = ichar; |
| putnstr(buf + *num, wlen); |
| (*num)++; |
| } |
| } |
| |
| static void cread_add_str(char *str, int strsize, int insert, unsigned long *num, |
| unsigned long *eol_num, char *buf, unsigned long len) |
| { |
| while (strsize--) { |
| cread_add_char(*str, insert, num, eol_num, buf, len); |
| str++; |
| } |
| } |
| |
| static int cread_line(const char *const prompt, char *buf, unsigned int *len, |
| int timeout) |
| { |
| unsigned long num = 0; |
| unsigned long eol_num = 0; |
| unsigned long wlen; |
| char ichar; |
| int insert = 1; |
| int esc_len = 0; |
| char esc_save[8]; |
| int init_len = strlen(buf); |
| int rc; |
| |
| if (init_len) |
| cread_add_str(buf, init_len, 1, &num, &eol_num, buf, *len); |
| |
| while (1) { |
| rc = wait_for_ch_timeout(timeout, endtime); |
| if (rc < 0) |
| return rc; |
| timeout = 0; |
| |
| ichar = getcmd_getch(); |
| |
| if ((ichar == '\n') || (ichar == '\r')) { |
| putc('\n'); |
| break; |
| } |
| |
| /* |
| * handle standard linux xterm esc sequences for arrow key, etc. |
| */ |
| if (esc_len != 0) { |
| if (esc_len == 1) { |
| if (ichar == '[') { |
| esc_save[esc_len] = ichar; |
| esc_len = 2; |
| } else { |
| cread_add_str(esc_save, esc_len, insert, |
| &num, &eol_num, buf, *len); |
| esc_len = 0; |
| } |
| continue; |
| } |
| |
| switch (ichar) { |
| |
| case 'D': /* <- key */ |
| ichar = CTL_CH('b'); |
| esc_len = 0; |
| break; |
| case 'C': /* -> key */ |
| ichar = CTL_CH('f'); |
| esc_len = 0; |
| break; /* pass off to ^F handler */ |
| case 'H': /* Home key */ |
| ichar = CTL_CH('a'); |
| esc_len = 0; |
| break; /* pass off to ^A handler */ |
| case 'A': /* up arrow */ |
| ichar = CTL_CH('p'); |
| esc_len = 0; |
| break; /* pass off to ^P handler */ |
| case 'B': /* down arrow */ |
| ichar = CTL_CH('n'); |
| esc_len = 0; |
| break; /* pass off to ^N handler */ |
| default: |
| esc_save[esc_len++] = ichar; |
| cread_add_str(esc_save, esc_len, insert, |
| &num, &eol_num, buf, *len); |
| esc_len = 0; |
| continue; |
| } |
| } |
| |
| switch (ichar) { |
| case 0x1b: |
| if (esc_len == 0) { |
| esc_save[esc_len] = ichar; |
| esc_len = 1; |
| } else { |
| puts("impossible condition #876\n"); |
| esc_len = 0; |
| } |
| break; |
| |
| case CTL_CH('a'): |
| BEGINNING_OF_LINE(); |
| break; |
| case CTL_CH('c'): /* ^C - break */ |
| *buf = '\0'; /* discard input */ |
| return (-1); |
| case CTL_CH('f'): |
| if (num < eol_num) { |
| getcmd_putch(buf[num]); |
| num++; |
| } |
| break; |
| case CTL_CH('b'): |
| if (num) { |
| getcmd_putch(CTL_BACKSPACE); |
| num--; |
| } |
| break; |
| case CTL_CH('d'): |
| if (num < eol_num) { |
| wlen = eol_num - num - 1; |
| if (wlen) { |
| memmove(&buf[num], &buf[num+1], wlen); |
| putnstr(buf + num, wlen); |
| } |
| |
| getcmd_putch(' '); |
| do { |
| getcmd_putch(CTL_BACKSPACE); |
| } while (wlen--); |
| eol_num--; |
| } |
| break; |
| case CTL_CH('k'): |
| ERASE_TO_EOL(); |
| break; |
| case CTL_CH('e'): |
| REFRESH_TO_EOL(); |
| break; |
| case CTL_CH('o'): |
| insert = !insert; |
| break; |
| case CTL_CH('x'): |
| case CTL_CH('u'): |
| BEGINNING_OF_LINE(); |
| ERASE_TO_EOL(); |
| break; |
| case DEL: |
| case DEL7: |
| case 8: |
| if (num) { |
| wlen = eol_num - num; |
| num--; |
| memmove(&buf[num], &buf[num+1], wlen); |
| getcmd_putch(CTL_BACKSPACE); |
| putnstr(buf + num, wlen); |
| getcmd_putch(' '); |
| do { |
| getcmd_putch(CTL_BACKSPACE); |
| } while (wlen--); |
| eol_num--; |
| } |
| break; |
| case CTL_CH('p'): |
| case CTL_CH('n'): |
| { |
| char * hline; |
| |
| esc_len = 0; |
| |
| if (ichar == CTL_CH('p')) |
| hline = hist_prev(); |
| else |
| hline = hist_next(); |
| |
| if (!hline) { |
| getcmd_cbeep(); |
| continue; |
| } |
| |
| /* nuke the current line */ |
| /* first, go home */ |
| BEGINNING_OF_LINE(); |
| |
| /* erase to end of line */ |
| ERASE_TO_EOL(); |
| |
| /* copy new line into place and display */ |
| strcpy(buf, hline); |
| eol_num = strlen(buf); |
| REFRESH_TO_EOL(); |
| continue; |
| } |
| #ifdef CONFIG_AUTO_COMPLETE |
| case '\t': { |
| int num2, col; |
| |
| /* do not autocomplete when in the middle */ |
| if (num < eol_num) { |
| getcmd_cbeep(); |
| break; |
| } |
| |
| buf[num] = '\0'; |
| col = strlen(prompt) + eol_num; |
| num2 = num; |
| if (cmd_auto_complete(prompt, buf, &num2, &col)) { |
| col = num2 - num; |
| num += col; |
| eol_num += col; |
| } |
| break; |
| } |
| #endif |
| default: |
| cread_add_char(ichar, insert, &num, &eol_num, buf, *len); |
| break; |
| } |
| } |
| *len = eol_num; |
| buf[eol_num] = '\0'; /* lose the newline */ |
| |
| if (buf[0] && buf[0] != CREAD_HIST_CHAR) |
| cread_add_to_hist(buf); |
| hist_cur = hist_add_idx; |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_CMDLINE_EDITING */ |
| |
| /****************************************************************************/ |
| |
| /* |
| * Prompt for input and read a line. |
| * If CONFIG_BOOT_RETRY_TIME is defined and retry_time >= 0, |
| * time out when time goes past endtime (timebase time in ticks). |
| * Return: number of read characters |
| * -1 if break |
| * -2 if timed out |
| */ |
| int readline (const char *const prompt) |
| { |
| /* |
| * If console_buffer isn't 0-length the user will be prompted to modify |
| * it instead of entering it from scratch as desired. |
| */ |
| console_buffer[0] = '\0'; |
| |
| return readline_into_buffer(prompt, console_buffer, 0); |
| } |
| |
| |
| int readline_into_buffer(const char *const prompt, char *buffer, int timeout) |
| { |
| char *p = buffer; |
| int rc; |
| #ifdef CONFIG_CMDLINE_EDITING |
| unsigned int len = CONFIG_SYS_CBSIZE; |
| static int initted = 0; |
| |
| /* |
| * History uses a global array which is not |
| * writable until after relocation to RAM. |
| * Revert to non-history version if still |
| * running from flash. |
| */ |
| if (gd->flags & GD_FLG_RELOC) { |
| if (!initted) { |
| hist_init(); |
| initted = 1; |
| } |
| |
| if (prompt) |
| puts (prompt); |
| |
| rc = cread_line(prompt, p, &len, timeout); |
| return rc < 0 ? rc : len; |
| |
| } else { |
| #endif /* CONFIG_CMDLINE_EDITING */ |
| char * p_buf = p; |
| int n = 0; /* buffer index */ |
| int plen = 0; /* prompt length */ |
| int col; /* output column cnt */ |
| char c; |
| |
| /* print prompt */ |
| if (prompt) { |
| plen = strlen (prompt); |
| puts (prompt); |
| } |
| col = plen; |
| |
| for (;;) { |
| rc = wait_for_ch_timeout(timeout, endtime); |
| if (rc < 0) |
| return rc; |
| timeout = 0; |
| |
| WATCHDOG_RESET(); /* Trigger watchdog, if needed */ |
| |
| #ifdef CONFIG_SHOW_ACTIVITY |
| while (!tstc()) { |
| show_activity(0); |
| WATCHDOG_RESET(); |
| } |
| #endif |
| c = getc(); |
| |
| /* |
| * Special character handling |
| */ |
| switch (c) { |
| case '\r': /* Enter */ |
| case '\n': |
| *p = '\0'; |
| puts ("\r\n"); |
| return (p - p_buf); |
| |
| case '\0': /* nul */ |
| continue; |
| |
| case 0x03: /* ^C - break */ |
| p_buf[0] = '\0'; /* discard input */ |
| return (-1); |
| |
| case 0x15: /* ^U - erase line */ |
| while (col > plen) { |
| puts (erase_seq); |
| --col; |
| } |
| p = p_buf; |
| n = 0; |
| continue; |
| |
| case 0x17: /* ^W - erase word */ |
| p=delete_char(p_buf, p, &col, &n, plen); |
| while ((n > 0) && (*p != ' ')) { |
| p=delete_char(p_buf, p, &col, &n, plen); |
| } |
| continue; |
| |
| case 0x08: /* ^H - backspace */ |
| case 0x7F: /* DEL - backspace */ |
| p=delete_char(p_buf, p, &col, &n, plen); |
| continue; |
| |
| default: |
| /* |
| * Must be a normal character then |
| */ |
| if (n < CONFIG_SYS_CBSIZE-2) { |
| if (c == '\t') { /* expand TABs */ |
| #ifdef CONFIG_AUTO_COMPLETE |
| /* if auto completion triggered just continue */ |
| *p = '\0'; |
| if (cmd_auto_complete(prompt, console_buffer, &n, &col)) { |
| p = p_buf + n; /* reset */ |
| continue; |
| } |
| #endif |
| puts (tab_seq+(col&07)); |
| col += 8 - (col&07); |
| } else { |
| ++col; /* echo input */ |
| putc (c); |
| } |
| *p++ = c; |
| ++n; |
| } else { /* Buffer full */ |
| putc ('\a'); |
| } |
| } |
| } |
| #ifdef CONFIG_CMDLINE_EDITING |
| } |
| #endif |
| } |
| |
| /****************************************************************************/ |
| |
| static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen) |
| { |
| char *s; |
| |
| if (*np == 0) { |
| return (p); |
| } |
| |
| if (*(--p) == '\t') { /* will retype the whole line */ |
| while (*colp > plen) { |
| puts (erase_seq); |
| (*colp)--; |
| } |
| for (s=buffer; s<p; ++s) { |
| if (*s == '\t') { |
| puts (tab_seq+((*colp) & 07)); |
| *colp += 8 - ((*colp) & 07); |
| } else { |
| ++(*colp); |
| putc (*s); |
| } |
| } |
| } else { |
| puts (erase_seq); |
| (*colp)--; |
| } |
| (*np)--; |
| return (p); |
| } |
| |
| /****************************************************************************/ |
| |
| int parse_line (char *line, char *argv[]) |
| { |
| int nargs = 0; |
| |
| #ifdef DEBUG_PARSER |
| printf ("parse_line: \"%s\"\n", line); |
| #endif |
| while (nargs < CONFIG_SYS_MAXARGS) { |
| |
| /* skip any white space */ |
| while (isblank(*line)) |
| ++line; |
| |
| if (*line == '\0') { /* end of line, no more args */ |
| argv[nargs] = NULL; |
| #ifdef DEBUG_PARSER |
| printf ("parse_line: nargs=%d\n", nargs); |
| #endif |
| return (nargs); |
| } |
| |
| argv[nargs++] = line; /* begin of argument string */ |
| |
| /* find end of string */ |
| while (*line && !isblank(*line)) |
| ++line; |
| |
| if (*line == '\0') { /* end of line, no more args */ |
| argv[nargs] = NULL; |
| #ifdef DEBUG_PARSER |
| printf ("parse_line: nargs=%d\n", nargs); |
| #endif |
| return (nargs); |
| } |
| |
| *line++ = '\0'; /* terminate current arg */ |
| } |
| |
| printf ("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS); |
| |
| #ifdef DEBUG_PARSER |
| printf ("parse_line: nargs=%d\n", nargs); |
| #endif |
| return (nargs); |
| } |
| |
| /****************************************************************************/ |
| |
| #ifndef CONFIG_SYS_HUSH_PARSER |
| static void process_macros (const char *input, char *output) |
| { |
| char c, prev; |
| const char *varname_start = NULL; |
| int inputcnt = strlen (input); |
| int outputcnt = CONFIG_SYS_CBSIZE; |
| int state = 0; /* 0 = waiting for '$' */ |
| |
| /* 1 = waiting for '(' or '{' */ |
| /* 2 = waiting for ')' or '}' */ |
| /* 3 = waiting for ''' */ |
| #ifdef DEBUG_PARSER |
| char *output_start = output; |
| |
| printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", strlen (input), |
| input); |
| #endif |
| |
| prev = '\0'; /* previous character */ |
| |
| while (inputcnt && outputcnt) { |
| c = *input++; |
| inputcnt--; |
| |
| if (state != 3) { |
| /* remove one level of escape characters */ |
| if ((c == '\\') && (prev != '\\')) { |
| if (inputcnt-- == 0) |
| break; |
| prev = c; |
| c = *input++; |
| } |
| } |
| |
| switch (state) { |
| case 0: /* Waiting for (unescaped) $ */ |
| if ((c == '\'') && (prev != '\\')) { |
| state = 3; |
| break; |
| } |
| if ((c == '$') && (prev != '\\')) { |
| state++; |
| } else { |
| *(output++) = c; |
| outputcnt--; |
| } |
| break; |
| case 1: /* Waiting for ( */ |
| if (c == '(' || c == '{') { |
| state++; |
| varname_start = input; |
| } else { |
| state = 0; |
| *(output++) = '$'; |
| outputcnt--; |
| |
| if (outputcnt) { |
| *(output++) = c; |
| outputcnt--; |
| } |
| } |
| break; |
| case 2: /* Waiting for ) */ |
| if (c == ')' || c == '}') { |
| int i; |
| char envname[CONFIG_SYS_CBSIZE], *envval; |
| int envcnt = input - varname_start - 1; /* Varname # of chars */ |
| |
| /* Get the varname */ |
| for (i = 0; i < envcnt; i++) { |
| envname[i] = varname_start[i]; |
| } |
| envname[i] = 0; |
| |
| /* Get its value */ |
| envval = getenv (envname); |
| |
| /* Copy into the line if it exists */ |
| if (envval != NULL) |
| while ((*envval) && outputcnt) { |
| *(output++) = *(envval++); |
| outputcnt--; |
| } |
| /* Look for another '$' */ |
| state = 0; |
| } |
| break; |
| case 3: /* Waiting for ' */ |
| if ((c == '\'') && (prev != '\\')) { |
| state = 0; |
| } else { |
| *(output++) = c; |
| outputcnt--; |
| } |
| break; |
| } |
| prev = c; |
| } |
| |
| if (outputcnt) |
| *output = 0; |
| else |
| *(output - 1) = 0; |
| |
| #ifdef DEBUG_PARSER |
| printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n", |
| strlen (output_start), output_start); |
| #endif |
| } |
| |
| /**************************************************************************** |
| * returns: |
| * 1 - command executed, repeatable |
| * 0 - command executed but not repeatable, interrupted commands are |
| * always considered not repeatable |
| * -1 - not executed (unrecognized, bootd recursion or too many args) |
| * (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is |
| * considered unrecognized) |
| * |
| * WARNING: |
| * |
| * We must create a temporary copy of the command since the command we get |
| * may be the result from getenv(), which returns a pointer directly to |
| * the environment data, which may change magicly when the command we run |
| * creates or modifies environment variables (like "bootp" does). |
| */ |
| static int builtin_run_command(const char *cmd, int flag) |
| { |
| char cmdbuf[CONFIG_SYS_CBSIZE]; /* working copy of cmd */ |
| char *token; /* start of token in cmdbuf */ |
| char *sep; /* end of token (separator) in cmdbuf */ |
| char finaltoken[CONFIG_SYS_CBSIZE]; |
| char *str = cmdbuf; |
| char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ |
| int argc, inquotes; |
| int repeatable = 1; |
| int rc = 0; |
| |
| #ifdef DEBUG_PARSER |
| printf ("[RUN_COMMAND] cmd[%p]=\"", cmd); |
| puts (cmd ? cmd : "NULL"); /* use puts - string may be loooong */ |
| puts ("\"\n"); |
| #endif |
| |
| clear_ctrlc(); /* forget any previous Control C */ |
| |
| if (!cmd || !*cmd) { |
| return -1; /* empty command */ |
| } |
| |
| if (strlen(cmd) >= CONFIG_SYS_CBSIZE) { |
| puts ("## Command too long!\n"); |
| return -1; |
| } |
| |
| strcpy (cmdbuf, cmd); |
| |
| /* Process separators and check for invalid |
| * repeatable commands |
| */ |
| |
| #ifdef DEBUG_PARSER |
| printf ("[PROCESS_SEPARATORS] %s\n", cmd); |
| #endif |
| while (*str) { |
| |
| /* |
| * Find separator, or string end |
| * Allow simple escape of ';' by writing "\;" |
| */ |
| for (inquotes = 0, sep = str; *sep; sep++) { |
| if ((*sep=='\'') && |
| (*(sep-1) != '\\')) |
| inquotes=!inquotes; |
| |
| if (!inquotes && |
| (*sep == ';') && /* separator */ |
| ( sep != str) && /* past string start */ |
| (*(sep-1) != '\\')) /* and NOT escaped */ |
| break; |
| } |
| |
| /* |
| * Limit the token to data between separators |
| */ |
| token = str; |
| if (*sep) { |
| str = sep + 1; /* start of command for next pass */ |
| *sep = '\0'; |
| } |
| else |
| str = sep; /* no more commands for next pass */ |
| #ifdef DEBUG_PARSER |
| printf ("token: \"%s\"\n", token); |
| #endif |
| |
| /* find macros in this token and replace them */ |
| process_macros (token, finaltoken); |
| |
| /* Extract arguments */ |
| if ((argc = parse_line (finaltoken, argv)) == 0) { |
| rc = -1; /* no command at all */ |
| continue; |
| } |
| |
| if (cmd_process(flag, argc, argv, &repeatable)) |
| rc = -1; |
| |
| /* Did the user stop this? */ |
| if (had_ctrlc ()) |
| return -1; /* if stopped then not repeatable */ |
| } |
| |
| return rc ? rc : repeatable; |
| } |
| #endif |
| |
| /* |
| * Run a command using the selected parser. |
| * |
| * @param cmd Command to run |
| * @param flag Execution flags (CMD_FLAG_...) |
| * @return 0 on success, or != 0 on error. |
| */ |
| int run_command(const char *cmd, int flag) |
| { |
| #ifndef CONFIG_SYS_HUSH_PARSER |
| /* |
| * builtin_run_command can return 0 or 1 for success, so clean up |
| * its result. |
| */ |
| if (builtin_run_command(cmd, flag) == -1) |
| return 1; |
| |
| return 0; |
| #else |
| return parse_string_outer(cmd, |
| FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP); |
| #endif |
| } |
| |
| #ifndef CONFIG_SYS_HUSH_PARSER |
| /** |
| * Execute a list of command separated by ; or \n using the built-in parser. |
| * |
| * This function cannot take a const char * for the command, since if it |
| * finds newlines in the string, it replaces them with \0. |
| * |
| * @param cmd String containing list of commands |
| * @param flag Execution flags (CMD_FLAG_...) |
| * @return 0 on success, or != 0 on error. |
| */ |
| static int builtin_run_command_list(char *cmd, int flag) |
| { |
| char *line, *next; |
| int rcode = 0; |
| |
| /* |
| * Break into individual lines, and execute each line; terminate on |
| * error. |
| */ |
| line = next = cmd; |
| while (*next) { |
| if (*next == '\n') { |
| *next = '\0'; |
| /* run only non-empty commands */ |
| if (*line) { |
| debug("** exec: \"%s\"\n", line); |
| if (builtin_run_command(line, 0) < 0) { |
| rcode = 1; |
| break; |
| } |
| } |
| line = next + 1; |
| } |
| ++next; |
| } |
| if (rcode == 0 && *line) |
| rcode = (builtin_run_command(line, 0) >= 0); |
| |
| return rcode; |
| } |
| #endif |
| |
| int run_command_list(const char *cmd, int len, int flag) |
| { |
| int need_buff = 1; |
| char *buff = (char *)cmd; /* cast away const */ |
| int rcode = 0; |
| |
| if (len == -1) { |
| len = strlen(cmd); |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| /* hush will never change our string */ |
| need_buff = 0; |
| #else |
| /* the built-in parser will change our string if it sees \n */ |
| need_buff = strchr(cmd, '\n') != NULL; |
| #endif |
| } |
| if (need_buff) { |
| buff = malloc(len + 1); |
| if (!buff) |
| return 1; |
| memcpy(buff, cmd, len); |
| buff[len] = '\0'; |
| } |
| #ifdef CONFIG_SYS_HUSH_PARSER |
| rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON); |
| #else |
| /* |
| * This function will overwrite any \n it sees with a \0, which |
| * is why it can't work with a const char *. Here we are making |
| * using of internal knowledge of this function, to avoid always |
| * doing a malloc() which is actually required only in a case that |
| * is pretty rare. |
| */ |
| rcode = builtin_run_command_list(buff, flag); |
| if (need_buff) |
| free(buff); |
| #endif |
| |
| return rcode; |
| } |
| |
| /****************************************************************************/ |
| |
| #if defined(CONFIG_CMD_RUN) |
| int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| for (i=1; i<argc; ++i) { |
| char *arg; |
| |
| if ((arg = getenv (argv[i])) == NULL) { |
| printf ("## Error: \"%s\" not defined\n", argv[i]); |
| return 1; |
| } |
| |
| if (run_command(arg, flag) != 0) |
| return 1; |
| } |
| return 0; |
| } |
| #endif |