| /* |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * (C) Copyright 2002 |
| * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> |
| * |
| * (C) Copyright 2003 |
| * Texas Instruments, <www.ti.com> |
| * Kshitij Gupta <Kshitij@ti.com> |
| * |
| * (C) Copyright 2004 |
| * ARM Ltd. |
| * Philippe Robin, <philippe.robin@arm.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <netdev.h> |
| #include <asm/io.h> |
| #include <asm/arch/systimer.h> |
| #include <asm/arch/sysctrl.h> |
| #include <asm/arch/wdt.h> |
| #include "../drivers/mmc/arm_pl180_mmci.h" |
| |
| static ulong timestamp; |
| static ulong lastdec; |
| |
| static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01; |
| static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE; |
| |
| static void flash__init(void); |
| static void vexpress_timer_init(void); |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if defined(CONFIG_SHOW_BOOT_PROGRESS) |
| void show_boot_progress(int progress) |
| { |
| printf("Boot reached stage %d\n", progress); |
| } |
| #endif |
| |
| static inline void delay(ulong loops) |
| { |
| __asm__ volatile ("1:\n" |
| "subs %0, %1, #1\n" |
| "bne 1b" : "=r" (loops) : "0" (loops)); |
| } |
| |
| int board_init(void) |
| { |
| gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; |
| gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS; |
| gd->flags = 0; |
| |
| icache_enable(); |
| flash__init(); |
| vexpress_timer_init(); |
| |
| return 0; |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| int rc = 0; |
| #ifdef CONFIG_SMC911X |
| rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); |
| #endif |
| return rc; |
| } |
| |
| int cpu_mmc_init(bd_t *bis) |
| { |
| int rc = 0; |
| (void) bis; |
| #ifdef CONFIG_ARM_PL180_MMCI |
| struct pl180_mmc_host *host; |
| |
| host = malloc(sizeof(struct pl180_mmc_host)); |
| if (!host) |
| return -ENOMEM; |
| memset(host, 0, sizeof(*host)); |
| |
| strcpy(host->name, "MMC"); |
| host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; |
| host->pwr_init = INIT_PWR; |
| host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; |
| host->voltages = VOLTAGE_WINDOW_MMC; |
| host->caps = 0; |
| host->clock_in = ARM_MCLK; |
| host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); |
| host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; |
| rc = arm_pl180_mmci_init(host); |
| #endif |
| return rc; |
| } |
| |
| static void flash__init(void) |
| { |
| /* Setup the sytem control register to allow writing to flash */ |
| writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN, |
| &sysctrl_base->scflashctrl); |
| } |
| |
| int dram_init(void) |
| { |
| gd->ram_size = |
| get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); |
| return 0; |
| } |
| |
| void dram_init_banksize(void) |
| { |
| gd->bd->bi_dram[0].start = PHYS_SDRAM_1; |
| gd->bd->bi_dram[0].size = |
| get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); |
| gd->bd->bi_dram[1].start = PHYS_SDRAM_2; |
| gd->bd->bi_dram[1].size = |
| get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); |
| } |
| |
| int timer_init(void) |
| { |
| return 0; |
| } |
| |
| /* |
| * Start timer: |
| * Setup a 32 bit timer, running at 1KHz |
| * Versatile Express Motherboard provides 1 MHz timer |
| */ |
| static void vexpress_timer_init(void) |
| { |
| /* |
| * Set clock frequency in system controller: |
| * VEXPRESS_REFCLK is 32KHz |
| * VEXPRESS_TIMCLK is 1MHz |
| */ |
| writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL | |
| SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL | |
| readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl); |
| |
| /* |
| * Set Timer0 to be: |
| * Enabled, free running, no interrupt, 32-bit, wrapping |
| */ |
| writel(SYSTIMER_RELOAD, &systimer_base->timer0load); |
| writel(SYSTIMER_RELOAD, &systimer_base->timer0value); |
| writel(SYSTIMER_EN | SYSTIMER_32BIT | \ |
| readl(&systimer_base->timer0control), \ |
| &systimer_base->timer0control); |
| |
| reset_timer_masked(); |
| } |
| |
| int v2m_cfg_write(u32 devfn, u32 data) |
| { |
| /* Configuration interface broken? */ |
| u32 val; |
| |
| devfn |= SYS_CFG_START | SYS_CFG_WRITE; |
| |
| val = readl(V2M_SYS_CFGSTAT); |
| writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT); |
| |
| writel(data, V2M_SYS_CFGDATA); |
| writel(devfn, V2M_SYS_CFGCTRL); |
| |
| do { |
| val = readl(V2M_SYS_CFGSTAT); |
| } while (val == 0); |
| |
| return !!(val & SYS_CFG_ERR); |
| } |
| |
| /* Use the ARM Watchdog System to cause reset */ |
| void reset_cpu(ulong addr) |
| { |
| if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) |
| printf("Unable to reboot\n"); |
| } |
| |
| /* |
| * Delay x useconds AND perserve advance timstamp value |
| * assumes timer is ticking at 1 msec |
| */ |
| void __udelay(ulong usec) |
| { |
| ulong tmo, tmp; |
| |
| tmo = usec / 1000; |
| tmp = get_timer(0); /* get current timestamp */ |
| |
| /* |
| * If setting this forward will roll time stamp then |
| * reset "advancing" timestamp to 0 and set lastdec value |
| * otherwise set the advancing stamp to the wake up time |
| */ |
| if ((tmo + tmp + 1) < tmp) |
| reset_timer_masked(); |
| else |
| tmo += tmp; |
| |
| while (get_timer_masked() < tmo) |
| ; /* loop till wakeup event */ |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| return get_timer_masked() - base; |
| } |
| |
| void reset_timer_masked(void) |
| { |
| lastdec = readl(&systimer_base->timer0value) / 1000; |
| timestamp = 0; |
| } |
| |
| ulong get_timer_masked(void) |
| { |
| ulong now = readl(&systimer_base->timer0value) / 1000; |
| |
| if (lastdec >= now) { /* normal mode (non roll) */ |
| timestamp += lastdec - now; |
| } else { /* count down timer overflowed */ |
| /* |
| * nts = ts + ld - now |
| * ts = old stamp, ld = time before passing through - 1 |
| * now = amount of time after passing though - 1 |
| * nts = new "advancing time stamp" |
| */ |
| timestamp += lastdec + SYSTIMER_RELOAD - now; |
| } |
| lastdec = now; |
| |
| return timestamp; |
| } |
| |
| void lowlevel_init(void) |
| { |
| } |
| |
| ulong get_board_rev(void){ |
| return readl((u32 *)SYS_ID); |
| } |
| |
| unsigned long long get_ticks(void) |
| { |
| return get_timer(0); |
| } |
| |
| ulong get_tbclk (void) |
| { |
| return (ulong)CONFIG_SYS_HZ; |
| } |