Add GPIOs for AP dev rev 2.
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 2539a89..0346a89 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -110,7 +110,7 @@
{GPMC_AD14, (M7)}, /* gpio_38 */
{GPMC_AD15, (M7)}, /* gpio_39 */
{GPMC_A16, (M7)}, /* gpio_40 */
- {GPMC_A17, (PTD | M3)}, /* hdmi_ls_oe */
+ {GPMC_A17, (PTD | M3)}, /* gpio_41/hdmi_ls_oe */
{GPMC_A18, (M7)}, /* kpd_row6 */
{GPMC_A19, (M7)}, /* gpio_43/sdio_exp_act_n */
{GPMC_A20, (M7)}, /* gpio_44 */
@@ -121,17 +121,17 @@
{GPMC_A25, (M7)}, /* gpio_49 */
{GPMC_NCS0, (M7)}, /* gpio_50 */
{GPMC_NCS1, (M7)}, /* gpio_51 */
- {GPMC_NCS2, (IEN | M3)}, /* ts_int */
+ {GPMC_NCS2, (IEN | M3)}, /* gpio_52/ts_int */
{GPMC_NCS3, (M7)}, /* gpio_53 */
{GPMC_NWP, (M7)}, /* gpio_54 */
{GPMC_CLK, (M7)}, /* gpio_55 */
{GPMC_NADV_ALE, (M7)}, /* gpio_56 */
{GPMC_NBE0_CLE, (M7)}, /* gpio_59 */
- {GPMC_NBE1, (PTD | M3)}, /* hdmi_ct_cp_hpd */
+ {GPMC_NBE1, (PTD | M3)}, /* gpio_60/hdmi_ct_cp_hpd */
{GPMC_WAIT0, (M7)}, /* gpio_61 */
{C2C_DATA11, (M7)}, /* gpio_100 */
- {C2C_DATA12, (PTU | IEN | M3)}, /* tearing_effect */
- {C2C_DATA13, (PTD | M3)}, /* lcd_reset */
+ {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101/tearing_effect */
+ {C2C_DATA13, (PTD | M3)}, /* gpio_102/lcd_reset */
{C2C_DATA14, (M7)}, /* dsi2_te0 */
{C2C_DATA15, (M7)}, /* gpio_104 */
{HDMI_HPD, (M0)}, /* hdmi_hpd */
@@ -169,7 +169,7 @@
{ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
{ABE_DMIC_CLK1, (M3)}, /* gpio_119 */
{ABE_DMIC_DIN1, (M7)}, /* abe_dmic_din1 */
- {ABE_DMIC_DIN2, (PTD | M3)}, /* ts_reset */
+ {ABE_DMIC_DIN2, (PTD | M3)}, /* gpio_121/ts_reset */
{ABE_DMIC_DIN3, (M7)}, /* abe_dmic_din3 */
{UART2_CTS, (M7)}, /* uart2_cts */
{UART2_RTS, (M7)}, /* uart2_rts */
@@ -195,20 +195,20 @@
{MCSPI4_CS0, (M7)}, /* sdmmc4_dat3 */
{UART4_RX, (M7)}, /* sdmmc4_dat2 */
{UART4_TX, (M7)}, /* sdmmc4_dat1 */
- {USBB2_ULPITLL_CLK, (M7)}, /* gpio_157 */
- {USBB2_ULPITLL_STP, (M7)}, /* dispc2_data23 */
- {USBB2_ULPITLL_DIR, (M7)}, /* dispc2_data22 */
+ {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157/sdio_select */
+ {USBB2_ULPITLL_STP, (IEN | M3)}, /* gpio_158/audio_select */
+ {USBB2_ULPITLL_DIR, (IEN | M3)}, /* gpio_159/display_mux */
{USBB2_ULPITLL_NXT, (M7)}, /* dispc2_data21 */
{USBB2_ULPITLL_DAT0, (M7)}, /* dispc2_data20 */
{USBB2_ULPITLL_DAT1, (M7)}, /* dispc2_data19 */
{USBB2_ULPITLL_DAT2, (M7)}, /* dispc2_data18 */
{USBB2_ULPITLL_DAT3, (M7)}, /* dispc2_data15 */
- {USBB2_ULPITLL_DAT4, (M7)}, /* dispc2_data14 */
- {USBB2_ULPITLL_DAT5, (M7)}, /* dispc2_data13 */
- {USBB2_ULPITLL_DAT6, (M7)}, /* dispc2_data12 */
- {USBB2_ULPITLL_DAT7, (M7)}, /* dispc2_data11 */
- {USBB2_HSIC_DATA, (M7)}, /* gpio_169 */
- {USBB2_HSIC_STROBE, (M7)}, /* gpio_170 */
+ {USBB2_ULPITLL_DAT4, (M3)}, /* gpio_165 */
+ {USBB2_ULPITLL_DAT5, (M3)}, /* gpio_166 */
+ {USBB2_ULPITLL_DAT6, (M3)}, /* gpio_167 */
+ {USBB2_ULPITLL_DAT7, (M3)}, /* gpio_168 */
+ {USBB2_HSIC_DATA, (M3)}, /* gpio_169 */
+ {USBB2_HSIC_STROBE, (M3)}, /* gpio_170 */
{UNIPRO_TX0, (M7)}, /* gpio_171 */
{UNIPRO_TY0, (M7)}, /* kpd_col1 */
{UNIPRO_TX1, (M7)}, /* kpd_col2 */
