blob: 07925c3bf433b79d03d07add63ebff238a9ce4da [file] [log] [blame]
/*
* Lowlevel setup for SMDK5250 board based on S5PC520
*
* Copyright (C) 2012 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
/* use iRAM stack in bl2 */
ldr sp, =CONFIG_IRAM_STACK
stmdb r13!, {ip,lr}
/* check reset status */
ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* LPA wakeup reset */
ldr r2, =S5P_CHECK_LPA
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*PS-Hold High*/
ldr r0, =0x1004330c
ldr r1, [r0]
orr r1, r1, #0x100
str r1, [r0]
/*
* If U-boot is already running in RAM, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_init
1:
bl tzpc_init
ldmia r13!, {ip,pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET)
/* r1 = physical address of exynos5_cpu_resume function*/
ldr r1, [r0]
/* Jump to kernel */
mov pc, r1
nop
nop