include/linux/usb/ch9.h - boot/u-boot-linaro-stable - Git at Google

 /*
  * This file holds USB constants and structures that are needed for
  * USB device APIs.  These are used by the USB device model, which is
  * defined in chapter 9 of the USB 2.0 specification and in the
  * Wireless USB 1.0 (spread around).  Linux has several APIs in C that
  * need these:
  *
  * - the master/host side Linux-USB kernel driver API;
  * - the "usbfs" user space API; and
  * - the Linux "gadget" slave/device/peripheral side driver API.
  *
  * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
  * act either as a USB master/host or as a USB slave/device.  That means
  * the master and slave side APIs benefit from working well together.
  *
  * There's also "Wireless USB", using low power short range radios for
  * peripheral interconnection but otherwise building on the USB framework.
  *
  * Note all descriptors are declared '__attribute__((packed))' so that:
  *
  * [a] they never get padded, either internally (USB spec writers
  *     probably handled that) or externally;
  *
  * [b] so that accessing bigger-than-a-bytes fields will never
  *     generate bus errors on any platform, even when the location of
  *     its descriptor inside a bundle isn't "naturally aligned", and
  *
  * [c] for consistency, removing all doubt even when it appears to
  *     someone that the two other points are non-issues for that
  *     particular descriptor type.
  *
  * Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and
  *                      Remy Bohmer <linux@bohmer.net>
  */

 #ifndef __LINUX_USB_CH9_H
 #define __LINUX_USB_CH9_H

 #include <linux/types.h>	/* __u8 etc */

 /*-------------------------------------------------------------------------*/

 /* CONTROL REQUEST SUPPORT */

 /*
  * USB directions
  *
  * This bit flag is used in endpoint descriptors' bEndpointAddress field.
  * It's also one of three fields in control requests bRequestType.
  */
 #define USB_DIR_OUT			0		/* to device */
 #define USB_DIR_IN			0x80		/* to host */

 /*
  * USB types, the second of three bRequestType fields
  */
 #define USB_TYPE_MASK			(0x03 << 5)
 #define USB_TYPE_STANDARD		(0x00 << 5)
 #define USB_TYPE_CLASS			(0x01 << 5)
 #define USB_TYPE_VENDOR			(0x02 << 5)
 #define USB_TYPE_RESERVED		(0x03 << 5)

 /*
  * USB recipients, the third of three bRequestType fields
  */
 #define USB_RECIP_MASK			0x1f
 #define USB_RECIP_DEVICE		0x00
 #define USB_RECIP_INTERFACE		0x01
 #define USB_RECIP_ENDPOINT		0x02
 #define USB_RECIP_OTHER			0x03
 /* From Wireless USB 1.0 */
 #define USB_RECIP_PORT			0x04
 #define USB_RECIP_RPIPE			0x05

 /*
  * Standard requests, for the bRequest field of a SETUP packet.
  *
  * These are qualified by the bRequestType field, so that for example
  * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
  * by a GET_STATUS request.
  */
 #define USB_REQ_GET_STATUS		0x00
 #define USB_REQ_CLEAR_FEATURE		0x01
 #define USB_REQ_SET_FEATURE		0x03
 #define USB_REQ_SET_ADDRESS		0x05
 #define USB_REQ_GET_DESCRIPTOR		0x06
 #define USB_REQ_SET_DESCRIPTOR		0x07
 #define USB_REQ_GET_CONFIGURATION	0x08
 #define USB_REQ_SET_CONFIGURATION	0x09
 #define USB_REQ_GET_INTERFACE		0x0A
 #define USB_REQ_SET_INTERFACE		0x0B
 #define USB_REQ_SYNCH_FRAME		0x0C

 #define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION		0x0E
 #define USB_REQ_RPIPE_ABORT		0x0E
 #define USB_REQ_SET_HANDSHAKE		0x0F
 #define USB_REQ_RPIPE_RESET		0x0F
 #define USB_REQ_GET_HANDSHAKE		0x10
 #define USB_REQ_SET_CONNECTION		0x11
 #define USB_REQ_SET_SECURITY_DATA	0x12
 #define USB_REQ_GET_SECURITY_DATA	0x13
 #define USB_REQ_SET_WUSB_DATA		0x14
 #define USB_REQ_LOOPBACK_DATA_WRITE	0x15
 #define USB_REQ_LOOPBACK_DATA_READ	0x16
 #define USB_REQ_SET_INTERFACE_DS	0x17

 /*
  * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
  * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
  * are at most sixteen features of each type.)
  */
 #define USB_DEVICE_SELF_POWERED		0	/* (read only) */
 #define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
 #define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
 #define USB_DEVICE_BATTERY		2	/* (wireless) */
 #define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
 #define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
 #define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
 #define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */

 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */


 /**
  * struct usb_ctrlrequest - SETUP data for a USB device control request
  * @bRequestType: matches the USB bmRequestType field
  * @bRequest: matches the USB bRequest field
  * @wValue: matches the USB wValue field (le16 byte order)
  * @wIndex: matches the USB wIndex field (le16 byte order)
  * @wLength: matches the USB wLength field (le16 byte order)
  *
  * This structure is used to send control requests to a USB device.  It matches
  * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
  * USB spec for a fuller description of the different fields, and what they are
  * used for.
  *
  * Note that the driver for any interface can issue control requests.
  * For most devices, interfaces don't coordinate with each other, so
  * such requests may be made at any time.
  */
 #if defined(__BIG_ENDIAN) || defined(__ARMEB__)
 #error (functionality not verified for big endian targets, todo...)
 #endif

 struct usb_ctrlrequest {
 	__u8 bRequestType;
 	__u8 bRequest;
 	__le16 wValue;
 	__le16 wIndex;
 	__le16 wLength;
 } __attribute__ ((packed));

 /*-------------------------------------------------------------------------*/

 /*
  * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
  * byte order "on the wire".  But when exposed through Linux-USB APIs,
  * they've been converted to cpu byte order.
  */

 /*
  * Descriptor types ... USB 2.0 spec table 9.5
  */
 #define USB_DT_DEVICE			0x01
 #define USB_DT_CONFIG			0x02
 #define USB_DT_STRING			0x03
 #define USB_DT_INTERFACE		0x04
 #define USB_DT_ENDPOINT			0x05
 #define USB_DT_DEVICE_QUALIFIER		0x06
 #define USB_DT_OTHER_SPEED_CONFIG	0x07
 #define USB_DT_INTERFACE_POWER		0x08
 /* these are from a minor usb 2.0 revision (ECN) */
 #define USB_DT_OTG			0x09
 #define USB_DT_DEBUG			0x0a
 #define USB_DT_INTERFACE_ASSOCIATION	0x0b
 /* these are from the Wireless USB spec */
 #define USB_DT_SECURITY			0x0c
 #define USB_DT_KEY			0x0d
 #define USB_DT_ENCRYPTION_TYPE		0x0e
 #define USB_DT_BOS			0x0f
 #define USB_DT_DEVICE_CAPABILITY	0x10
 #define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
 #define USB_DT_WIRE_ADAPTER		0x21
 #define USB_DT_RPIPE			0x22

 /* Conventional codes for class-specific descriptors.  The convention is
  * defined in the USB "Common Class" Spec (3.11).  Individual class specs
  * are authoritative for their usage, not the "common class" writeup.
  */
 #define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
 #define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
 #define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
 #define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
 #define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)

 /* All standard descriptors have these 2 fields at the beginning */
 struct usb_descriptor_header {
 	__u8  bLength;
 	__u8  bDescriptorType;
 } __attribute__ ((packed));

 #define USB_DT_DEVICE_SIZE		18


 /*
  * Device and/or Interface Class codes
  * as found in bDeviceClass or bInterfaceClass
  * and defined by www.usb.org documents
  */
 #define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
 #define USB_CLASS_AUDIO			1
 #define USB_CLASS_COMM			2
 #define USB_CLASS_HID			3
 #define USB_CLASS_PHYSICAL		5
 #define USB_CLASS_STILL_IMAGE		6
 #define USB_CLASS_PRINTER		7
 #define USB_CLASS_MASS_STORAGE		8
 #define USB_CLASS_HUB			9
 #define USB_CLASS_CDC_DATA		0x0a
 #define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
 #define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
 #define USB_CLASS_VIDEO			0x0e
 #define USB_CLASS_WIRELESS_CONTROLLER	0xe0
 #define USB_CLASS_MISC			0xef
 #define USB_CLASS_APP_SPEC		0xfe
 #define USB_CLASS_VENDOR_SPEC		0xff

 /*-------------------------------------------------------------------------*/

 /* USB_DT_CONFIG: Configuration descriptor information.
  *
  * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
  * descriptor type is different.  Highspeed-capable devices can look
  * different depending on what speed they're currently running.  Only
  * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
  * descriptors.
  */
 struct usb_config_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__le16 wTotalLength;
 	__u8  bNumInterfaces;
 	__u8  bConfigurationValue;
 	__u8  iConfiguration;
 	__u8  bmAttributes;
 	__u8  bMaxPower;
 } __attribute__ ((packed));

 #define USB_DT_CONFIG_SIZE		9

 /* from config descriptor bmAttributes */
 #define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
 #define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
 #define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
 #define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */

 /* note that "string" zero is special, it holds language codes that
  * the device supports, not Unicode characters.
  */

 #define USB_DT_INTERFACE_SIZE		9
 #define USB_DT_ENDPOINT_SIZE		7
 #define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */


 /*
  * Endpoints
  */
 #define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
 #define USB_ENDPOINT_DIR_MASK		0x80

 #define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
 #define USB_ENDPOINT_XFER_CONTROL	0
 #define USB_ENDPOINT_XFER_ISOC		1
 #define USB_ENDPOINT_XFER_BULK		2
 #define USB_ENDPOINT_XFER_INT		3
 #define USB_ENDPOINT_MAX_ADJUSTABLE	0x80


 /*-------------------------------------------------------------------------*/

 /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
 struct usb_qualifier_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__le16 bcdUSB;
 	__u8  bDeviceClass;
 	__u8  bDeviceSubClass;
 	__u8  bDeviceProtocol;
 	__u8  bMaxPacketSize0;
 	__u8  bNumConfigurations;
 	__u8  bRESERVED;
 } __attribute__ ((packed));


 /*-------------------------------------------------------------------------*/

 /* USB_DT_OTG (from OTG 1.0a supplement) */
 struct usb_otg_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__u8  bmAttributes;	/* support for HNP, SRP, etc */
 } __attribute__ ((packed));

 /* from usb_otg_descriptor.bmAttributes */
 #define USB_OTG_SRP		(1 << 0)
 #define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */

 /*-------------------------------------------------------------------------*/

 /* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
 struct usb_debug_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	/* bulk endpoints with 8 byte maxpacket */
 	__u8  bDebugInEndpoint;
 	__u8  bDebugOutEndpoint;
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
 struct usb_interface_assoc_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__u8  bFirstInterface;
 	__u8  bInterfaceCount;
 	__u8  bFunctionClass;
 	__u8  bFunctionSubClass;
 	__u8  bFunctionProtocol;
 	__u8  iFunction;
 } __attribute__ ((packed));


 /*-------------------------------------------------------------------------*/

 /* USB_DT_SECURITY:  group of wireless security descriptors, including
  * encryption types available for setting up a CC/association.
  */
 struct usb_security_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__le16 wTotalLength;
 	__u8  bNumEncryptionTypes;
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
  * may be retrieved.
  */
 struct usb_key_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__u8  tTKID[3];
 	__u8  bReserved;
 	__u8  bKeyData[0];
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
 struct usb_encryption_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__u8  bEncryptionType;
 #define	USB_ENC_TYPE_UNSECURE		0
 #define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
 #define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
 #define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
 	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
 	__u8  bAuthKeyIndex;
 } __attribute__((packed));


 /*-------------------------------------------------------------------------*/

 /* USB_DT_BOS:  group of wireless capabilities */
 struct usb_bos_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__le16 wTotalLength;
 	__u8  bNumDeviceCaps;
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
 struct usb_dev_cap_header {
 	__u8  bLength;
 	__u8  bDescriptorType;
 	__u8  bDevCapabilityType;
 } __attribute__((packed));

 #define	USB_CAP_TYPE_WIRELESS_USB	1

 struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
 	__u8  bLength;
 	__u8  bDescriptorType;
 	__u8  bDevCapabilityType;

 	__u8  bmAttributes;
 #define	USB_WIRELESS_P2P_DRD		(1 << 1)
 #define	USB_WIRELESS_BEACON_MASK	(3 << 2)
 #define	USB_WIRELESS_BEACON_SELF	(1 << 2)
 #define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
 #define	USB_WIRELESS_BEACON_NONE	(3 << 2)
 	__le16 wPHYRates;	/* bit rates, Mbps */
 #define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
 #define	USB_WIRELESS_PHY_80		(1 << 1)
 #define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
 #define	USB_WIRELESS_PHY_160		(1 << 3)
 #define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
 #define	USB_WIRELESS_PHY_320		(1 << 5)
 #define	USB_WIRELESS_PHY_400		(1 << 6)
 #define	USB_WIRELESS_PHY_480		(1 << 7)
 	__u8  bmTFITXPowerInfo;	/* TFI power levels */
 	__u8  bmFFITXPowerInfo;	/* FFI power levels */
 	__le16 bmBandGroup;
 	__u8  bReserved;
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
  * each endpoint descriptor for a wireless device
  */
 struct usb_wireless_ep_comp_descriptor {
 	__u8  bLength;
 	__u8  bDescriptorType;

 	__u8  bMaxBurst;
 	__u8  bMaxSequence;
 	__le16 wMaxStreamDelay;
 	__le16 wOverTheAirPacketSize;
 	__u8  bOverTheAirInterval;
 	__u8  bmCompAttributes;
 #define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
 #define USB_ENDPOINT_SWITCH_NO		0
 #define USB_ENDPOINT_SWITCH_SWITCH	1
 #define USB_ENDPOINT_SWITCH_SCALE	2
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
  * host and a device for connection set up, mutual authentication, and
  * exchanging short lived session keys.  The handshake depends on a CC.
  */
 struct usb_handshake {
 	__u8 bMessageNumber;
 	__u8 bStatus;
 	__u8 tTKID[3];
 	__u8 bReserved;
 	__u8 CDID[16];
 	__u8 nonce[16];
 	__u8 MIC[8];
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
  * A CC may also be set up using non-wireless secure channels (including
  * wired USB!), and some devices may support CCs with multiple hosts.
  */
 struct usb_connection_context {
 	__u8 CHID[16];		/* persistent host id */
 	__u8 CDID[16];		/* device id (unique w/in host context) */
 	__u8 CK[16];		/* connection key */
 } __attribute__((packed));

 /*-------------------------------------------------------------------------*/

 /* USB 2.0 defines three speeds, here's how Linux identifies them */

 enum usb_device_speed {
 	USB_SPEED_UNKNOWN = 0,			/* enumerating */
 	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
 	USB_SPEED_HIGH,				/* usb 2.0 */
 	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
 };

 enum usb_device_state {
 	/* NOTATTACHED isn't in the USB spec, and this state acts
 	 * the same as ATTACHED ... but it's clearer this way.
 	 */
 	USB_STATE_NOTATTACHED = 0,

 	/* chapter 9 and authentication (wireless) device states */
 	USB_STATE_ATTACHED,
 	USB_STATE_POWERED,			/* wired */
 	USB_STATE_UNAUTHENTICATED,		/* auth */
 	USB_STATE_RECONNECTING,			/* auth */
 	USB_STATE_DEFAULT,			/* limited function */
 	USB_STATE_ADDRESS,
 	USB_STATE_CONFIGURED,			/* most functions */

 	USB_STATE_SUSPENDED

 	/* NOTE:  there are actually four different SUSPENDED
 	 * states, returning to POWERED, DEFAULT, ADDRESS, or
 	 * CONFIGURED respectively when SOF tokens flow again.
 	 */
 };

 #endif	/* __LINUX_USB_CH9_H */
	/*
	* This file holds USB constants and structures that are needed for
	* USB device APIs. These are used by the USB device model, which is
	* defined in chapter 9 of the USB 2.0 specification and in the
	* Wireless USB 1.0 (spread around). Linux has several APIs in C that
	* need these:
	*
	* - the master/host side Linux-USB kernel driver API;
	* - the "usbfs" user space API; and
	* - the Linux "gadget" slave/device/peripheral side driver API.
	*
	* USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
	* act either as a USB master/host or as a USB slave/device. That means
	* the master and slave side APIs benefit from working well together.
	*
	* There's also "Wireless USB", using low power short range radios for
	* peripheral interconnection but otherwise building on the USB framework.
	*
	* Note all descriptors are declared '__attribute__((packed))' so that:
	*
	* [a] they never get padded, either internally (USB spec writers
	* probably handled that) or externally;
	*
	* [b] so that accessing bigger-than-a-bytes fields will never
	* generate bus errors on any platform, even when the location of
	* its descriptor inside a bundle isn't "naturally aligned", and
	*
	* [c] for consistency, removing all doubt even when it appears to
	* someone that the two other points are non-issues for that
	* particular descriptor type.
	*
	* Ported to U-boot by: Thomas Smits <ts.smits@gmail.com> and
	* Remy Bohmer <linux@bohmer.net>
	*/

	#ifndef __LINUX_USB_CH9_H
	#define __LINUX_USB_CH9_H

	#include <linux/types.h> /* __u8 etc */

	/-------------------------------------------------------------------------/

	/* CONTROL REQUEST SUPPORT */

	/*
	* USB directions
	*
	* This bit flag is used in endpoint descriptors' bEndpointAddress field.
	* It's also one of three fields in control requests bRequestType.
	*/
	#define USB_DIR_OUT 0 /* to device */
	#define USB_DIR_IN 0x80 /* to host */

	/*
	* USB types, the second of three bRequestType fields
	*/
	#define USB_TYPE_MASK (0x03 << 5)
	#define USB_TYPE_STANDARD (0x00 << 5)
	#define USB_TYPE_CLASS (0x01 << 5)
	#define USB_TYPE_VENDOR (0x02 << 5)
	#define USB_TYPE_RESERVED (0x03 << 5)

	/*
	* USB recipients, the third of three bRequestType fields
	*/
	#define USB_RECIP_MASK 0x1f
	#define USB_RECIP_DEVICE 0x00
	#define USB_RECIP_INTERFACE 0x01
	#define USB_RECIP_ENDPOINT 0x02
	#define USB_RECIP_OTHER 0x03
	/* From Wireless USB 1.0 */
	#define USB_RECIP_PORT 0x04
	#define USB_RECIP_RPIPE 0x05

	/*
	* Standard requests, for the bRequest field of a SETUP packet.
	*
	* These are qualified by the bRequestType field, so that for example
	* TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
	* by a GET_STATUS request.
	*/
	#define USB_REQ_GET_STATUS 0x00
	#define USB_REQ_CLEAR_FEATURE 0x01
	#define USB_REQ_SET_FEATURE 0x03
	#define USB_REQ_SET_ADDRESS 0x05
	#define USB_REQ_GET_DESCRIPTOR 0x06
	#define USB_REQ_SET_DESCRIPTOR 0x07
	#define USB_REQ_GET_CONFIGURATION 0x08
	#define USB_REQ_SET_CONFIGURATION 0x09
	#define USB_REQ_GET_INTERFACE 0x0A
	#define USB_REQ_SET_INTERFACE 0x0B
	#define USB_REQ_SYNCH_FRAME 0x0C

	#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
	#define USB_REQ_GET_ENCRYPTION 0x0E
	#define USB_REQ_RPIPE_ABORT 0x0E
	#define USB_REQ_SET_HANDSHAKE 0x0F
	#define USB_REQ_RPIPE_RESET 0x0F
	#define USB_REQ_GET_HANDSHAKE 0x10
	#define USB_REQ_SET_CONNECTION 0x11
	#define USB_REQ_SET_SECURITY_DATA 0x12
	#define USB_REQ_GET_SECURITY_DATA 0x13
	#define USB_REQ_SET_WUSB_DATA 0x14
	#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
	#define USB_REQ_LOOPBACK_DATA_READ 0x16
	#define USB_REQ_SET_INTERFACE_DS 0x17

	/*
	* USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
	* are read as a bit array returned by USB_REQ_GET_STATUS. (So there
	* are at most sixteen features of each type.)
	*/
	#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
	#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
	#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
	#define USB_DEVICE_BATTERY 2 /* (wireless) */
	#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
	#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
	#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
	#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
	#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */

	#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */


	/**
	* struct usb_ctrlrequest - SETUP data for a USB device control request
	* @bRequestType: matches the USB bmRequestType field
	* @bRequest: matches the USB bRequest field
	* @wValue: matches the USB wValue field (le16 byte order)
	* @wIndex: matches the USB wIndex field (le16 byte order)
	* @wLength: matches the USB wLength field (le16 byte order)
	*
	* This structure is used to send control requests to a USB device. It matches
	* the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
	* USB spec for a fuller description of the different fields, and what they are
	* used for.
	*
	* Note that the driver for any interface can issue control requests.
	* For most devices, interfaces don't coordinate with each other, so
	* such requests may be made at any time.
	*/
	#if defined(__BIG_ENDIAN) \|\| defined(__ARMEB__)
	#error (functionality not verified for big endian targets, todo...)
	#endif

	struct usb_ctrlrequest {
	__u8 bRequestType;
	__u8 bRequest;
	__le16 wValue;
	__le16 wIndex;
	__le16 wLength;
	} __attribute__ ((packed));

	/-------------------------------------------------------------------------/

	/*
	* STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
	* (rarely) accepted by SET_DESCRIPTOR.
	*
	* Note that all multi-byte values here are encoded in little endian
	* byte order "on the wire". But when exposed through Linux-USB APIs,
	* they've been converted to cpu byte order.
	*/

	/*
	* Descriptor types ... USB 2.0 spec table 9.5
	*/
	#define USB_DT_DEVICE 0x01
	#define USB_DT_CONFIG 0x02
	#define USB_DT_STRING 0x03
	#define USB_DT_INTERFACE 0x04
	#define USB_DT_ENDPOINT 0x05
	#define USB_DT_DEVICE_QUALIFIER 0x06
	#define USB_DT_OTHER_SPEED_CONFIG 0x07
	#define USB_DT_INTERFACE_POWER 0x08
	/* these are from a minor usb 2.0 revision (ECN) */
	#define USB_DT_OTG 0x09
	#define USB_DT_DEBUG 0x0a
	#define USB_DT_INTERFACE_ASSOCIATION 0x0b
	/* these are from the Wireless USB spec */
	#define USB_DT_SECURITY 0x0c
	#define USB_DT_KEY 0x0d
	#define USB_DT_ENCRYPTION_TYPE 0x0e
	#define USB_DT_BOS 0x0f
	#define USB_DT_DEVICE_CAPABILITY 0x10
	#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
	#define USB_DT_WIRE_ADAPTER 0x21
	#define USB_DT_RPIPE 0x22

	/* Conventional codes for class-specific descriptors. The convention is
	* defined in the USB "Common Class" Spec (3.11). Individual class specs
	* are authoritative for their usage, not the "common class" writeup.
	*/
	#define USB_DT_CS_DEVICE (USB_TYPE_CLASS \| USB_DT_DEVICE)
	#define USB_DT_CS_CONFIG (USB_TYPE_CLASS \| USB_DT_CONFIG)
	#define USB_DT_CS_STRING (USB_TYPE_CLASS \| USB_DT_STRING)
	#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS \| USB_DT_INTERFACE)
	#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS \| USB_DT_ENDPOINT)

	/* All standard descriptors have these 2 fields at the beginning */
	struct usb_descriptor_header {
	__u8 bLength;
	__u8 bDescriptorType;
	} __attribute__ ((packed));

	#define USB_DT_DEVICE_SIZE 18


	/*
	* Device and/or Interface Class codes
	* as found in bDeviceClass or bInterfaceClass
	* and defined by www.usb.org documents
	*/
	#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
	#define USB_CLASS_AUDIO 1
	#define USB_CLASS_COMM 2
	#define USB_CLASS_HID 3
	#define USB_CLASS_PHYSICAL 5
	#define USB_CLASS_STILL_IMAGE 6
	#define USB_CLASS_PRINTER 7
	#define USB_CLASS_MASS_STORAGE 8
	#define USB_CLASS_HUB 9
	#define USB_CLASS_CDC_DATA 0x0a
	#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
	#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
	#define USB_CLASS_VIDEO 0x0e
	#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
	#define USB_CLASS_MISC 0xef
	#define USB_CLASS_APP_SPEC 0xfe
	#define USB_CLASS_VENDOR_SPEC 0xff

	/-------------------------------------------------------------------------/

	/* USB_DT_CONFIG: Configuration descriptor information.
	*
	* USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
	* descriptor type is different. Highspeed-capable devices can look
	* different depending on what speed they're currently running. Only
	* devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
	* descriptors.
	*/
	struct usb_config_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__le16 wTotalLength;
	__u8 bNumInterfaces;
	__u8 bConfigurationValue;
	__u8 iConfiguration;
	__u8 bmAttributes;
	__u8 bMaxPower;
	} __attribute__ ((packed));

	#define USB_DT_CONFIG_SIZE 9

	/* from config descriptor bmAttributes */
	#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
	#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
	#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
	#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */

	/* note that "string" zero is special, it holds language codes that
	* the device supports, not Unicode characters.
	*/

	#define USB_DT_INTERFACE_SIZE 9
	#define USB_DT_ENDPOINT_SIZE 7
	#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */


	/*
	* Endpoints
	*/
	#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
	#define USB_ENDPOINT_DIR_MASK 0x80

	#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
	#define USB_ENDPOINT_XFER_CONTROL 0
	#define USB_ENDPOINT_XFER_ISOC 1
	#define USB_ENDPOINT_XFER_BULK 2
	#define USB_ENDPOINT_XFER_INT 3
	#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80


	/-------------------------------------------------------------------------/

	/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
	struct usb_qualifier_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__le16 bcdUSB;
	__u8 bDeviceClass;
	__u8 bDeviceSubClass;
	__u8 bDeviceProtocol;
	__u8 bMaxPacketSize0;
	__u8 bNumConfigurations;
	__u8 bRESERVED;
	} __attribute__ ((packed));


	/-------------------------------------------------------------------------/

	/* USB_DT_OTG (from OTG 1.0a supplement) */
	struct usb_otg_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__u8 bmAttributes; /* support for HNP, SRP, etc */
	} __attribute__ ((packed));

	/* from usb_otg_descriptor.bmAttributes */
	#define USB_OTG_SRP (1 << 0)
	#define USB_OTG_HNP (1 << 1) /* swap host/device roles */

	/-------------------------------------------------------------------------/

	/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
	struct usb_debug_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	/* bulk endpoints with 8 byte maxpacket */
	__u8 bDebugInEndpoint;
	__u8 bDebugOutEndpoint;
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
	struct usb_interface_assoc_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__u8 bFirstInterface;
	__u8 bInterfaceCount;
	__u8 bFunctionClass;
	__u8 bFunctionSubClass;
	__u8 bFunctionProtocol;
	__u8 iFunction;
	} __attribute__ ((packed));


	/-------------------------------------------------------------------------/

	/* USB_DT_SECURITY: group of wireless security descriptors, including
	* encryption types available for setting up a CC/association.
	*/
	struct usb_security_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__le16 wTotalLength;
	__u8 bNumEncryptionTypes;
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
	* may be retrieved.
	*/
	struct usb_key_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__u8 tTKID[3];
	__u8 bReserved;
	__u8 bKeyData[0];
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
	struct usb_encryption_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__u8 bEncryptionType;
	#define USB_ENC_TYPE_UNSECURE 0
	#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
	#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
	#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
	__u8 bEncryptionValue; /* use in SET_ENCRYPTION */
	__u8 bAuthKeyIndex;
	} __attribute__((packed));


	/-------------------------------------------------------------------------/

	/* USB_DT_BOS: group of wireless capabilities */
	struct usb_bos_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__le16 wTotalLength;
	__u8 bNumDeviceCaps;
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
	struct usb_dev_cap_header {
	__u8 bLength;
	__u8 bDescriptorType;
	__u8 bDevCapabilityType;
	} __attribute__((packed));

	#define USB_CAP_TYPE_WIRELESS_USB 1

	struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
	__u8 bLength;
	__u8 bDescriptorType;
	__u8 bDevCapabilityType;

	__u8 bmAttributes;
	#define USB_WIRELESS_P2P_DRD (1 << 1)
	#define USB_WIRELESS_BEACON_MASK (3 << 2)
	#define USB_WIRELESS_BEACON_SELF (1 << 2)
	#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
	#define USB_WIRELESS_BEACON_NONE (3 << 2)
	__le16 wPHYRates; /* bit rates, Mbps */
	#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
	#define USB_WIRELESS_PHY_80 (1 << 1)
	#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
	#define USB_WIRELESS_PHY_160 (1 << 3)
	#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
	#define USB_WIRELESS_PHY_320 (1 << 5)
	#define USB_WIRELESS_PHY_400 (1 << 6)
	#define USB_WIRELESS_PHY_480 (1 << 7)
	__u8 bmTFITXPowerInfo; /* TFI power levels */
	__u8 bmFFITXPowerInfo; /* FFI power levels */
	__le16 bmBandGroup;
	__u8 bReserved;
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
	* each endpoint descriptor for a wireless device
	*/
	struct usb_wireless_ep_comp_descriptor {
	__u8 bLength;
	__u8 bDescriptorType;

	__u8 bMaxBurst;
	__u8 bMaxSequence;
	__le16 wMaxStreamDelay;
	__le16 wOverTheAirPacketSize;
	__u8 bOverTheAirInterval;
	__u8 bmCompAttributes;
	#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
	#define USB_ENDPOINT_SWITCH_NO 0
	#define USB_ENDPOINT_SWITCH_SWITCH 1
	#define USB_ENDPOINT_SWITCH_SCALE 2
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
	* host and a device for connection set up, mutual authentication, and
	* exchanging short lived session keys. The handshake depends on a CC.
	*/
	struct usb_handshake {
	__u8 bMessageNumber;
	__u8 bStatus;
	__u8 tTKID[3];
	__u8 bReserved;
	__u8 CDID[16];
	__u8 nonce[16];
	__u8 MIC[8];
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
	* A CC may also be set up using non-wireless secure channels (including
	* wired USB!), and some devices may support CCs with multiple hosts.
	*/
	struct usb_connection_context {
	__u8 CHID[16]; /* persistent host id */
	__u8 CDID[16]; /* device id (unique w/in host context) */
	__u8 CK[16]; /* connection key */
	} __attribute__((packed));

	/-------------------------------------------------------------------------/

	/* USB 2.0 defines three speeds, here's how Linux identifies them */

	enum usb_device_speed {
	USB_SPEED_UNKNOWN = 0, /* enumerating */
	USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
	USB_SPEED_HIGH, /* usb 2.0 */
	USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
	};

	enum usb_device_state {
	/* NOTATTACHED isn't in the USB spec, and this state acts
	* the same as ATTACHED ... but it's clearer this way.
	*/
	USB_STATE_NOTATTACHED = 0,

	/* chapter 9 and authentication (wireless) device states */
	USB_STATE_ATTACHED,
	USB_STATE_POWERED, /* wired */
	USB_STATE_UNAUTHENTICATED, /* auth */
	USB_STATE_RECONNECTING, /* auth */
	USB_STATE_DEFAULT, /* limited function */
	USB_STATE_ADDRESS,
	USB_STATE_CONFIGURED, /* most functions */

	USB_STATE_SUSPENDED

	/* NOTE: there are actually four different SUSPENDED
	* states, returning to POWERED, DEFAULT, ADDRESS, or
	* CONFIGURED respectively when SOF tokens flow again.
	*/
	};

	#endif /* __LINUX_USB_CH9_H */