remove Usb_Host_Shield/main.cpp
Change-Id: I4541aea2f7f03c0d9ca69ee4b03c5905447e94a9
diff --git a/USB_Host_Shield/main.cpp b/USB_Host_Shield/main.cpp
deleted file mode 100644
index 0a50f68..0000000
--- a/USB_Host_Shield/main.cpp
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright 2009-2011 Oleg Mazurov, Circuits At Home, http://www.circuitsathome.com
- * MAX3421E USB host controller support
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the authors nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/* Mouse communication via control endpoint */
-#include <spi.h>
-#include <max3421e.h>
-#include <usb.h>
-
-#define DEVADDR 1
-#define CONFVALUE 1
-
-void setup();
-void loop();
-
-MAX3421E Max;
-USB Usb;
-
-void setup()
-{
- Serial.begin( 115200 );
- Serial.println("Start");
- Max.powerOn();
- delay( 200 );
-}
-
-void loop()
-{
- byte rcode;
- Max.Task();
- Usb.Task();
- if( Usb.getUsbTaskState() == USB_STATE_CONFIGURING ) {
- mouse0_init();
- }//if( Usb.getUsbTaskState() == USB_STATE_CONFIGURING...
- if( Usb.getUsbTaskState() == USB_STATE_RUNNING ) { //poll the keyboard
- rcode = mouse0_poll();
- if( rcode ) {
- Serial.print("Mouse Poll Error: ");
- Serial.println( rcode, HEX );
- }//if( rcode...
- }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING...
-}
-/* Initialize mouse */
-void mouse0_init( void )
-{
- byte rcode = 0; //return code
- /**/
- Usb.setDevTableEntry( 1, Usb.getDevTableEntry( 0,0 ) ); //copy device 0 endpoint information to device 1
- /* Configure device */
- rcode = Usb.setConf( DEVADDR, 0, CONFVALUE );
- if( rcode ) {
- Serial.print("Error configuring mouse. Return code : ");
- Serial.println( rcode, HEX );
- while(1); //stop
- }//if( rcode...
- Usb.setUsbTaskState( USB_STATE_RUNNING );
- return;
-}
-/* Poll mouse using Get Report and print result */
-byte mouse0_poll( void )
-{
- byte rcode,i;
- char buf[ 4 ] = { 0 }; //mouse buffer
- static char old_buf[ 4 ] = { 0 }; //last poll
- /* poll mouse */
- rcode = Usb.getReport( DEVADDR, 0, 4, 0, 1, 0, buf );
- if( rcode ) { //error
- return( rcode );
- }
- for( i = 0; i < 4; i++) { //check for new information
- if( buf[ i ] != old_buf[ i ] ) { //new info in buffer
- break;
- }
- }
- if( i == 4 ) {
- return( 0 ); //all bytes are the same
- }
- /* print buffer */
- if( buf[ 0 ] & 0x01 ) {
- Serial.print("Button1 pressed ");
- }
- if( buf[ 0 ] & 0x02 ) {
- Serial.print("Button2 pressed ");
- }
- if( buf[ 0 ] & 0x04 ) {
- Serial.print("Button3 pressed ");
- }
- Serial.println("");
- Serial.print("X-axis: ");
- Serial.println( buf[ 1 ], DEC);
- Serial.print("Y-axis: ");
- Serial.println( buf[ 2 ], DEC);
- Serial.print("Wheel: ");
- Serial.println( buf[ 3 ], DEC);
- for( i = 0; i < 4; i++ ) {
- old_buf[ i ] = buf[ i ]; //copy buffer
- }
- Serial.println("");
- return( rcode );
-}
