| # config.mk |
| # |
| # Product-specific compile-time definitions. |
| # |
| |
| TARGET_BOARD_PLATFORM := omap4 |
| TARGET_NO_BOOTLOADER := true # Uses u-boot instead |
| TARGET_NO_KERNEL := false |
| TARGET_HWPACK_CONFIG := device/linaro/pandaboard/config |
| DEVICE_TREES := omap4-panda:board.dtb |
| ifneq ($(wildcard $(TOP)/kernel/linaro/pandaboard/arch/arm/configs/android_omap4_defconfig),) |
| BOARD_EGL_CFG := device/linaro/pandaboard/egl.cfg |
| KERNEL_CONFIG := android_omap4_defconfig |
| else |
| BOARD_EGL_CFG := device/linaro/pandaboard/softwaregfx/egl.cfg |
| KERNEL_CONFIG := omap4plus_defconfig |
| endif |
| TARGET_USE_UBOOT := true |
| UBOOT_CONFIG := omap4_panda_config |
| TARGET_USE_XLOADER := false |
| XLOADER_CONFIG := omap4430panda_config |
| TARGET_NO_RECOVERY := true |
| TARGET_NO_RADIOIMAGE := true |
| OMAP_ENHANCEMENT := true |
| HARDWARE_OMX := false |
| USE_CAMERA_STUB := true |
| INCLUDE_PERF := 0 |
| |
| BOARD_USES_GENERIC_AUDIO := false |
| #BOARD_USES_ALSA_AUDIO := false |
| BUILD_WITH_ALSA_UTILS := false |
| # For old-school tinyHAL: |
| BOARD_USES_TINY_AUDIO_HW := true |
| # For JellyBean tinyHAL: |
| BOARD_USES_TINYHAL_AUDIO := true |
| |
| BOARD_HAVE_BLUETOOTH := true |
| BOARD_HAVE_BLUETOOTH_BCM := true |
| |
| # Enabling Wifi on Pandaboard 4460 |
| #BOARD_WPA_SUPPLICANT_DRIVER := NL80211 |
| BOARD_WPA_SUPPLICANT_DRIVER := WEXT |
| WPA_SUPPLICANT_VERSION := VER_0_8_X |
| BOARD_WPA_SUPPLICANT_PRIVATE_LIB := private_lib_driver_cmd |
| # Below condition allows us to check if the image is being built for |
| # 3.4+ kernel. |
| ifeq ($(KERNEL_CONFIG),omap4plus_defconfig) |
| WIFI_DRIVER_MODULE_PATH := "/system/modules/wlcore_sdio.ko" |
| WIFI_DRIVER_MODULE_NAME := "wlcore_sdio" |
| else |
| WIFI_DRIVER_MODULE_PATH := "/system/modules/wl12xx_sdio.ko" |
| WIFI_DRIVER_MODULE_NAME := "wl12xx_sdio" |
| endif |
| WIFI_FIRMWARE_LOADER := "" |
| |
| TARGET_CPU_ABI := armeabi-v7a |
| TARGET_CPU_ABI2 := armeabi |
| TARGET_CPU_SMP := true |
| TARGET_CPU_VARIANT := cortex-a9 |
| |
| ifdef HARDWARE_OMX |
| OMX_VENDOR := ti |
| OMX_VENDOR_INCLUDES := \ |
| hardware/ti/omx/system/src/openmax_il/omx_core/inc \ |
| hardware/ti/omx/image/src/openmax_il/jpeg_enc/inc |
| OMX_VENDOR_WRAPPER := TI_OMX_Wrapper |
| BOARD_OPENCORE_LIBRARIES := libOMX_Core |
| BOARD_OPENCORE_FLAGS := -DHARDWARE_OMX=1 |
| endif |
| |
| ifdef OMAP_ENHANCEMENT |
| COMMON_GLOBAL_CFLAGS += -DOMAP_ENHANCEMENT -DTARGET_OMAP4 |
| endif |
| |
| # Enable NEON feature |
| TARGET_ARCH := arm |
| TARGET_ARCH_VARIANT := armv7-a-neon |
| ARCH_ARM_HAVE_TLS_REGISTER := true |
| |
| EXTRA_PACKAGE_MANAGEMENT := false |
| |
| TARGET_USERIMAGES_USE_EXT4 := true |
| TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true |
| |
| #BOARD_USES_HGL := true |
| #BOARD_USES_OVERLAY := true |
| USE_OPENGL_RENDERER := true |
| |
| # PandaBoard uses an OMAP4 -- Cortex A9 |
| TARGET_EXTRA_CFLAGS += $(call cc-ifversion, -ge, 46, $(call cc-option,-mtune=cortex-a9,$(call cc-option,-mtune=cortex-a8)) $(call cc-option,-mcpu=cortex-a9,$(call cc-option,-mcpu=cortex-a8))) |
| |
| # ARMs gator (DS-5) |
| TARGET_USE_GATOR:= true |
| |
| # Build uImage and uInitrd instead of kernel and ramdisk.img |
| TARGET_BOOTLOADER_TYPE := uboot |
