blob: 8ba2144ad5469d1c6b0e5c2c0f2d9609d5a80a3f [file] [log] [blame]
#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This file includes all definitions that apply to ALL tuna devices, and
# are also specific to tuna devices
#
# Everything in this directory will become public
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := device/samsung/tuna/kernel
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
DEVICE_PACKAGE_OVERLAYS := device/samsung/tuna/overlay
# This device is xhdpi. However the platform doesn't
# currently contain all of the bitmaps at xhdpi density so
# we do this little trick to fall back to the hdpi version
# if the xhdpi doesn't exist.
PRODUCT_AAPT_CONFIG := normal hdpi xhdpi
PRODUCT_AAPT_PREF_CONFIG := xhdpi
PRODUCT_PACKAGES := \
lights.tuna \
charger \
charger_res_images
PRODUCT_PACKAGES += \
sensors.tuna \
libinvensense_mpl
PRODUCT_PACKAGES += \
nfc.tuna
PRODUCT_PACKAGES += \
power.tuna
# Audio
PRODUCT_PACKAGES += \
audio.primary.tuna \
audio.a2dp.default \
audio.usb.default
PRODUCT_COPY_FILES += \
device/samsung/tuna/audio/audio_policy.conf:system/etc/audio_policy.conf \
device/samsung/tuna/audio_effects.conf:system/vendor/etc/audio_effects.conf
PRODUCT_PACKAGES += \
tuna_hdcp_keys
#PRODUCT_PACKAGES += \
# keystore.tuna
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel \
device/samsung/tuna/init.tuna.rc:root/init.tuna.rc \
device/samsung/tuna/init.tuna.usb.rc:root/init.tuna.usb.rc \
device/samsung/tuna/fstab.tuna:root/fstab.tuna \
device/samsung/tuna/ueventd.tuna.rc:root/ueventd.tuna.rc \
device/samsung/tuna/media_profiles.xml:system/etc/media_profiles.xml \
device/samsung/tuna/media_codecs.xml:system/etc/media_codecs.xml \
device/samsung/tuna/gps.conf:system/etc/gps.conf
# Wifi
ifneq ($(TARGET_PREBUILT_WIFI_MODULE),)
PRODUCT_COPY_FILES += \
$(TARGET_PREBUILT_WIFI_MODULE):system/lib/modules/bcmdhd.ko
endif
PRODUCT_COPY_FILES += \
device/samsung/tuna/bcmdhd.cal:system/etc/wifi/bcmdhd.cal
PRODUCT_PROPERTY_OVERRIDES := \
wifi.interface=wlan0
# Enable AAC 5.1 output
PRODUCT_PROPERTY_OVERRIDES += \
media.aac_51_output_enabled=true
# Set default USB interface
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
persist.sys.usb.config=mtp
# NFC
PRODUCT_PACKAGES += \
libnfc \
libnfc_jni \
Nfc \
Tag
# Live Wallpapers
PRODUCT_PACKAGES += \
LiveWallpapers \
LiveWallpapersPicker \
VisualizationWallpapers \
librs_jni
# Key maps
PRODUCT_COPY_FILES += \
device/samsung/tuna/tuna-gpio-keypad.kl:system/usr/keylayout/tuna-gpio-keypad.kl \
device/samsung/tuna/tuna-gpio-keypad.kcm:system/usr/keychars/tuna-gpio-keypad.kcm \
device/samsung/tuna/sec_jack.kl:system/usr/keylayout/sec_jack.kl \
device/samsung/tuna/sec_jack.kcm:system/usr/keychars/sec_jack.kcm \
device/samsung/tuna/sii9234_rcp.kl:system/usr/keylayout/sii9234_rcp.kl \
device/samsung/tuna/sii9234_rcp.kcm:system/usr/keychars/sii9234_rcp.kcm
# Input device calibration files
PRODUCT_COPY_FILES += \
device/samsung/tuna/Melfas_MMSxxx_Touchscreen.idc:system/usr/idc/Melfas_MMSxxx_Touchscreen.idc
# These are the hardware-specific features
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \
frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:system/etc/permissions/android.hardware.audio.low_latency.xml
# Melfas touchscreen firmware
PRODUCT_COPY_FILES += \
device/samsung/tuna/mms144_ts_rev31.fw:system/vendor/firmware/mms144_ts_rev31.fw \
device/samsung/tuna/mms144_ts_rev32.fw:system/vendor/firmware/mms144_ts_rev32.fw
# Portrait dock image
PRODUCT_COPY_FILES += \
device/samsung/tuna/dock.png:system/vendor/res/images/dock/dock.png
# Commands to migrate prefs from com.android.nfc3 to com.android.nfc
PRODUCT_COPY_FILES += $(call add-to-product-copy-files-if-exists,\
packages/apps/Nfc/migrate_nfc.txt:system/etc/updatecmds/migrate_nfc.txt)
# file that declares the MIFARE NFC constant
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml
# NFC EXTRAS add-on API
PRODUCT_PACKAGES += \
com.android.nfc_extras
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/com.android.nfc_extras.xml:system/etc/permissions/com.android.nfc_extras.xml
# NFCEE access control
ifeq ($(TARGET_BUILD_VARIANT),user)
NFCEE_ACCESS_PATH := device/samsung/tuna/nfcee_access.xml
else
NFCEE_ACCESS_PATH := device/samsung/tuna/nfcee_access_debug.xml
endif
PRODUCT_COPY_FILES += \
$(NFCEE_ACCESS_PATH):system/etc/nfcee_access.xml
PRODUCT_PROPERTY_OVERRIDES += \
ro.opengles.version=131072
PRODUCT_PROPERTY_OVERRIDES += \
ro.sf.lcd_density=320
PRODUCT_PROPERTY_OVERRIDES += \
ro.hwui.disable_scissor_opt=true
PRODUCT_CHARACTERISTICS := nosdcard
PRODUCT_TAGS += dalvik.gc.type-precise
PRODUCT_PACKAGES += \
librs_jni \
com.android.future.usb.accessory
# Filesystem management tools
PRODUCT_PACKAGES += \
e2fsck \
setup_fs
# for bugmailer
PRODUCT_PACKAGES += send_bug
PRODUCT_COPY_FILES += \
system/extras/bugmailer/bugmailer.sh:system/bin/bugmailer.sh \
system/extras/bugmailer/send_bug:system/bin/send_bug
$(call inherit-product, frameworks/native/build/phone-xhdpi-1024-dalvik-heap.mk)
$(call inherit-product-if-exists, vendor/nxp/pn544/nxp-pn544-fw-vendor.mk)
$(call inherit-product, hardware/ti/omap4xxx/omap4.mk)
$(call inherit-product-if-exists, vendor/ti/proprietary/omap4/ti-omap4-vendor.mk)
$(call inherit-product-if-exists, vendor/samsung/tuna/device-vendor.mk)
BOARD_WLAN_DEVICE_REV := bcm4330_b2
WIFI_BAND := 802_11_ABG
$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4330/device-bcm.mk)