| /* |
| * Copyright (C) 2011 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "audio_hw_primary" |
| /*#define LOG_NDEBUG 0*/ |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdint.h> |
| #include <sys/time.h> |
| #include <stdlib.h> |
| |
| #include <cutils/log.h> |
| #include <cutils/str_parms.h> |
| #include <cutils/properties.h> |
| |
| #include <hardware/hardware.h> |
| #include <system/audio.h> |
| #include <hardware/audio.h> |
| |
| #include <tinyalsa/asoundlib.h> |
| #include <audio_utils/resampler.h> |
| #include <audio_utils/echo_reference.h> |
| #include <hardware/audio_effect.h> |
| #include <audio_effects/effect_aec.h> |
| |
| #include "ril_interface.h" |
| |
| |
| /* Mixer control names */ |
| #define MIXER_DL2_LEFT_EQUALIZER "DL2 Left Equalizer" |
| #define MIXER_DL2_RIGHT_EQUALIZER "DL2 Right Equalizer" |
| #define MIXER_DL1_MEDIA_PLAYBACK_VOLUME "DL1 Media Playback Volume" |
| #define MIXER_DL1_VOICE_PLAYBACK_VOLUME "DL1 Voice Playback Volume" |
| #define MIXER_DL1_TONES_PLAYBACK_VOLUME "DL1 Tones Playback Volume" |
| #define MIXER_DL2_MEDIA_PLAYBACK_VOLUME "DL2 Media Playback Volume" |
| #define MIXER_DL2_VOICE_PLAYBACK_VOLUME "DL2 Voice Playback Volume" |
| #define MIXER_DL2_TONES_PLAYBACK_VOLUME "DL2 Tones Playback Volume" |
| #define MIXER_SDT_DL_VOLUME "SDT DL Volume" |
| #define MIXER_SDT_UL_VOLUME "SDT UL Volume" |
| |
| #define MIXER_HEADSET_PLAYBACK_VOLUME "Headset Playback Volume" |
| #define MIXER_HANDSFREE_PLAYBACK_VOLUME "Handsfree Playback Volume" |
| #define MIXER_EARPHONE_PLAYBACK_VOLUME "Earphone Playback Volume" |
| #define MIXER_BT_UL_VOLUME "BT UL Volume" |
| |
| #define MIXER_DL1_EQUALIZER "DL1 Equalizer" |
| #define MIXER_DL1_MIXER_MULTIMEDIA "DL1 Mixer Multimedia" |
| #define MIXER_DL1_MIXER_VOICE "DL1 Mixer Voice" |
| #define MIXER_DL1_MIXER_TONES "DL1 Mixer Tones" |
| #define MIXER_DL2_MIXER_MULTIMEDIA "DL2 Mixer Multimedia" |
| #define MIXER_DL2_MIXER_VOICE "DL2 Mixer Voice" |
| #define MIXER_DL2_MIXER_TONES "DL2 Mixer Tones" |
| #define MIXER_SIDETONE_MIXER_PLAYBACK "Sidetone Mixer Playback" |
| #define MIXER_SIDETONE_MIXER_CAPTURE "Sidetone Mixer Capture" |
| #define MIXER_DL2_MONO_MIXER "DL2 Mono Mixer" |
| #define MIXER_DL1_PDM_SWITCH "DL1 PDM Switch" |
| #define MIXER_DL1_BT_VX_SWITCH "DL1 BT_VX Switch" |
| #define MIXER_VOICE_CAPTURE_MIXER_CAPTURE "Voice Capture Mixer Capture" |
| |
| #define MIXER_HS_LEFT_PLAYBACK "HS Left Playback" |
| #define MIXER_HS_RIGHT_PLAYBACK "HS Right Playback" |
| #define MIXER_HF_LEFT_PLAYBACK "HF Left Playback" |
| #define MIXER_HF_RIGHT_PLAYBACK "HF Right Playback" |
| #define MIXER_EARPHONE_ENABLE_SWITCH "Earphone Enable Switch" |
| |
| #define MIXER_ANALOG_LEFT_CAPTURE_ROUTE "Analog Left Capture Route" |
| #define MIXER_ANALOG_RIGHT_CAPTURE_ROUTE "Analog Right Capture Route" |
| #define MIXER_CAPTURE_PREAMPLIFIER_VOLUME "Capture Preamplifier Volume" |
| #define MIXER_CAPTURE_VOLUME "Capture Volume" |
| #define MIXER_AMIC_UL_VOLUME "AMIC UL Volume" |
| #define MIXER_AUDUL_VOICE_UL_VOLUME "AUDUL Voice UL Volume" |
| #define MIXER_MUX_VX0 "MUX_VX0" |
| #define MIXER_MUX_VX1 "MUX_VX1" |
| #define MIXER_MUX_UL10 "MUX_UL10" |
| #define MIXER_MUX_UL11 "MUX_UL11" |
| |
| /* Mixer control gain and route values */ |
| #define MIXER_ABE_GAIN_0DB 120 |
| #define MIXER_PLAYBACK_HS_DAC "HS DAC" |
| #define MIXER_PLAYBACK_HF_DAC "HF DAC" |
| #define MIXER_MAIN_MIC "Main Mic" |
| #define MIXER_SUB_MIC "Sub Mic" |
| #define MIXER_HS_MIC "Headset Mic" |
| #define MIXER_AMIC0 "AMic0" |
| #define MIXER_AMIC1 "AMic1" |
| #define MIXER_BT_LEFT "BT Left" |
| #define MIXER_BT_RIGHT "BT Right" |
| #define MIXER_450HZ_HIGH_PASS "450Hz High-pass" |
| #define MIXER_FLAT_RESPONSE "Flat response" |
| #define MIXER_4KHZ_LPF_0DB "4Khz LPF 0dB" |
| |
| /* HDMI mixer controls */ |
| #define MIXER_MAXIMUM_LPCM_CHANNELS "Maximum LPCM channels" |
| |
| |
| /* ALSA cards for OMAP4 */ |
| #define CARD_OMAP4_ABE 0 |
| #define CARD_OMAP4_HDMI 1 |
| #define CARD_TUNA_DEFAULT CARD_OMAP4_ABE |
| |
| /* ALSA ports for OMAP4 */ |
| #define PORT_MM 0 |
| #define PORT_MM2_UL 1 |
| #define PORT_VX 2 |
| #define PORT_TONES 3 |
| #define PORT_VIBRA 4 |
| #define PORT_MODEM 5 |
| #define PORT_MM_LP 6 |
| #define PORT_SPDIF 9 |
| #define PORT_HDMI 0 |
| |
| /* User serviceable */ |
| /* #define to use mmap no-irq mode for playback, #undef for non-mmap irq mode */ |
| #undef PLAYBACK_MMAP // was #define |
| /* short period (aka low latency) in milliseconds */ |
| #define SHORT_PERIOD_MS 3 // was 22 |
| /* deep buffer short period (screen on) in milliseconds */ |
| #define DEEP_BUFFER_SHORT_PERIOD_MS 22 |
| /* deep buffer long period (screen off) in milliseconds */ |
| #define DEEP_BUFFER_LONG_PERIOD_MS 308 |
| |
| /* Constraint imposed by ABE: for playback, all period sizes must be multiples of 24 frames |
| * = 500 us at 48 kHz. It seems to be either 48 or 96 for capture, or maybe it is because the |
| * limitation is actually a min number of bytes which translates to a different amount of frames |
| * according to the number of channels. |
| */ |
| #define ABE_BASE_FRAME_COUNT 24 |
| |
| /* Derived from MM_FULL_POWER_SAMPLING_RATE=48000 and ABE_BASE_FRAME_COUNT=24 */ |
| #define MULTIPLIER_FACTOR 2 |
| |
| /* number of base blocks in a short period (low latency) */ |
| #define SHORT_PERIOD_MULTIPLIER (SHORT_PERIOD_MS * MULTIPLIER_FACTOR) |
| /* number of frames per short period (low latency) */ |
| #define SHORT_PERIOD_SIZE (ABE_BASE_FRAME_COUNT * SHORT_PERIOD_MULTIPLIER) |
| |
| /* number of base blocks in a short deep buffer period (screen on) */ |
| #define DEEP_BUFFER_SHORT_PERIOD_MULTIPLIER (DEEP_BUFFER_SHORT_PERIOD_MS * MULTIPLIER_FACTOR) |
| /* number of frames per short deep buffer period (screen on) */ |
| #define DEEP_BUFFER_SHORT_PERIOD_SIZE (ABE_BASE_FRAME_COUNT * DEEP_BUFFER_SHORT_PERIOD_MULTIPLIER) |
| /* number of periods for deep buffer playback (screen on) */ |
| #define PLAYBACK_DEEP_BUFFER_SHORT_PERIOD_COUNT 4 |
| |
| /* number of short deep buffer periods in a long period */ |
| #define DEEP_BUFFER_LONG_PERIOD_MULTIPLIER \ |
| (DEEP_BUFFER_LONG_PERIOD_MS / DEEP_BUFFER_SHORT_PERIOD_MS) |
| /* number of frames per long deep buffer period (screen off) */ |
| #define DEEP_BUFFER_LONG_PERIOD_SIZE \ |
| (DEEP_BUFFER_SHORT_PERIOD_SIZE * DEEP_BUFFER_LONG_PERIOD_MULTIPLIER) |
| /* number of periods for deep buffer playback (screen off) */ |
| #define PLAYBACK_DEEP_BUFFER_LONG_PERIOD_COUNT 2 |
| |
| /* number of frames per period for HDMI multichannel output */ |
| #define HDMI_MULTI_PERIOD_SIZE 1024 |
| /* number of periods for HDMI multichannel output */ |
| #define HDMI_MULTI_PERIOD_COUNT 4 |
| /* default number of channels for HDMI multichannel output */ |
| #define HDMI_MULTI_DEFAULT_CHANNEL_COUNT 6 |
| |
| /* Number of pseudo periods for low latency playback. |
| * These are called "pseudo" periods in that they are not known as periods by ALSA. |
| * Formerly, ALSA was configured in MMAP mode with 2 large periods, and this |
| * number was set to 4 (2 didn't work). |
| * The short periods size and count were only known by the audio HAL. |
| * Now for low latency, we are using non-MMAP mode and can set this to 2. |
| */ |
| #ifdef PLAYBACK_MMAP |
| #define PLAYBACK_SHORT_PERIOD_COUNT 4 |
| /* If sample rate converter is required, then use triple-buffering to |
| * help mask the variance in cycle times. Otherwise use double-buffering. |
| */ |
| #elif DEFAULT_OUT_SAMPLING_RATE != MM_FULL_POWER_SAMPLING_RATE |
| #define PLAYBACK_SHORT_PERIOD_COUNT 3 |
| #else |
| #define PLAYBACK_SHORT_PERIOD_COUNT 2 |
| #endif |
| |
| /* write function */ |
| #ifdef PLAYBACK_MMAP |
| #define PCM_WRITE pcm_mmap_write |
| #else |
| #define PCM_WRITE pcm_write |
| #endif |
| |
| /* User serviceable */ |
| #define CAPTURE_PERIOD_MS 22 |
| |
| /* Number of frames per period for capture. This cannot be reduced below 96. |
| * Possibly related to the following rule in sound/soc/omap/omap-pcm.c: |
| * ret = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 384); |
| * (where 96 * 4 = 384) |
| * The only constraints I can find are periods_min = 2, period_bytes_min = 32. |
| * If you define RULES_DEBUG in sound/core/pcm_native.c, you can see which rule |
| * caused capture to fail. |
| * Decoupling playback and capture period size may have impacts on echo canceler behavior: |
| * to be verified. Currently 96 = 4 x 24 but it could be changed without noticing |
| * if we use separate defines. |
| */ |
| #define CAPTURE_PERIOD_SIZE (ABE_BASE_FRAME_COUNT * CAPTURE_PERIOD_MS * MULTIPLIER_FACTOR) |
| /* number of periods for capture */ |
| #define CAPTURE_PERIOD_COUNT 2 |
| /* minimum sleep time in out_write() when write threshold is not reached */ |
| #define MIN_WRITE_SLEEP_US 5000 |
| |
| #define DEFAULT_OUT_SAMPLING_RATE 44100 // 48000 is possible but interacts poorly with HDMI |
| |
| /* sampling rate when using MM low power port */ |
| #define MM_LOW_POWER_SAMPLING_RATE 44100 |
| /* sampling rate when using MM full power port */ |
| #define MM_FULL_POWER_SAMPLING_RATE 48000 // affects MULTIPLIER_FACTOR |
| /* sampling rate when using VX port for narrow band */ |
| #define VX_NB_SAMPLING_RATE 8000 |
| /* sampling rate when using VX port for wide band */ |
| #define VX_WB_SAMPLING_RATE 16000 |
| |
| /* conversions from dB to ABE and codec gains */ |
| #define DB_TO_ABE_GAIN(x) ((x) + MIXER_ABE_GAIN_0DB) |
| #define DB_TO_CAPTURE_PREAMPLIFIER_VOLUME(x) (((x) + 6) / 6) |
| #define DB_TO_CAPTURE_VOLUME(x) (((x) - 6) / 6) |
| #define DB_TO_HEADSET_VOLUME(x) (((x) + 30) / 2) |
| #define DB_TO_SPEAKER_VOLUME(x) (((x) + 52) / 2) |
| #define DB_TO_EARPIECE_VOLUME(x) (((x) + 24) / 2) |
| |
| /* conversions from codec and ABE gains to dB */ |
| #define DB_FROM_SPEAKER_VOLUME(x) ((x) * 2 - 52) |
| |
| /* use-case specific mic volumes, all in dB */ |
| #define CAPTURE_MAIN_MIC_VOLUME 16 |
| #define CAPTURE_SUB_MIC_VOLUME 18 |
| #define CAPTURE_HEADSET_MIC_VOLUME 12 |
| |
| #define VOICE_RECOGNITION_MAIN_MIC_VOLUME 5 |
| #define VOICE_RECOGNITION_SUB_MIC_VOLUME 18 |
| #define VOICE_RECOGNITION_HEADSET_MIC_VOLUME 14 |
| |
| #define CAMCORDER_MAIN_MIC_VOLUME 13 |
| #define CAMCORDER_SUB_MIC_VOLUME 10 |
| #define CAMCORDER_HEADSET_MIC_VOLUME 12 |
| |
| #define VOIP_MAIN_MIC_VOLUME 13 |
| #define VOIP_SUB_MIC_VOLUME 20 |
| #define VOIP_HEADSET_MIC_VOLUME 12 |
| |
| #define VOICE_CALL_MAIN_MIC_VOLUME 0 |
| #define VOICE_CALL_SUB_MIC_VOLUME_MAGURO -4 |
| #define VOICE_CALL_SUB_MIC_VOLUME_TORO -2 |
| #define VOICE_CALL_HEADSET_MIC_VOLUME 8 |
| |
| /* use-case specific output volumes */ |
| #define NORMAL_SPEAKER_VOLUME_TORO 6 |
| #define NORMAL_SPEAKER_VOLUME_MAGURO 2 |
| #define NORMAL_HEADSET_VOLUME_TORO -12 |
| #define NORMAL_HEADSET_VOLUME_MAGURO -12 |
| #define NORMAL_HEADPHONE_VOLUME_TORO -6 /* allow louder output for headphones */ |
| #define NORMAL_HEADPHONE_VOLUME_MAGURO -6 |
| #define NORMAL_EARPIECE_VOLUME_TORO -2 |
| #define NORMAL_EARPIECE_VOLUME_MAGURO -2 |
| |
| #define VOICE_CALL_SPEAKER_VOLUME_TORO 9 |
| #define VOICE_CALL_SPEAKER_VOLUME_MAGURO 6 |
| #define VOICE_CALL_HEADSET_VOLUME_TORO -6 |
| #define VOICE_CALL_HEADSET_VOLUME_MAGURO 0 |
| #define VOICE_CALL_EARPIECE_VOLUME_TORO 2 |
| #define VOICE_CALL_EARPIECE_VOLUME_MAGURO 6 |
| |
| #define VOIP_SPEAKER_VOLUME_TORO 9 |
| #define VOIP_SPEAKER_VOLUME_MAGURO 7 |
| #define VOIP_HEADSET_VOLUME_TORO -6 |
| #define VOIP_HEADSET_VOLUME_MAGURO -6 |
| #define VOIP_EARPIECE_VOLUME_TORO 6 |
| #define VOIP_EARPIECE_VOLUME_MAGURO 6 |
| |
| #define HEADPHONE_VOLUME_TTY -2 |
| #define RINGTONE_HEADSET_VOLUME_OFFSET -14 |
| |
| /* product-specific defines */ |
| #define PRODUCT_DEVICE_PROPERTY "ro.product.device" |
| #define PRODUCT_NAME_PROPERTY "ro.product.name" |
| #define PRODUCT_DEVICE_TORO "toro" |
| #define PRODUCT_NAME_YAKJU "yakju" |
| |
| #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) |
| |
| enum tty_modes { |
| TTY_MODE_OFF, |
| TTY_MODE_VCO, |
| TTY_MODE_HCO, |
| TTY_MODE_FULL |
| }; |
| |
| /* deep buffer */ |
| struct pcm_config pcm_config_mm = { |
| .channels = 2, |
| .rate = MM_FULL_POWER_SAMPLING_RATE, |
| .period_size = DEEP_BUFFER_LONG_PERIOD_SIZE, |
| .period_count = PLAYBACK_DEEP_BUFFER_LONG_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = DEEP_BUFFER_SHORT_PERIOD_SIZE * 2, |
| .avail_min = DEEP_BUFFER_LONG_PERIOD_SIZE, |
| }; |
| |
| /* low latency */ |
| struct pcm_config pcm_config_tones = { |
| .channels = 2, |
| .rate = MM_FULL_POWER_SAMPLING_RATE, |
| .period_size = SHORT_PERIOD_SIZE, |
| .period_count = PLAYBACK_SHORT_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| #ifdef PLAYBACK_MMAP |
| .start_threshold = SHORT_PERIOD_SIZE, |
| .avail_min = SHORT_PERIOD_SIZE, |
| #else |
| .start_threshold = 0, |
| .avail_min = 0, |
| #endif |
| }; |
| |
| struct pcm_config pcm_config_hdmi_multi = { |
| .channels = HDMI_MULTI_DEFAULT_CHANNEL_COUNT, /* changed when the stream is opened */ |
| .rate = MM_FULL_POWER_SAMPLING_RATE, /* changed when the stream is opened */ |
| .period_size = HDMI_MULTI_PERIOD_SIZE, |
| .period_count = HDMI_MULTI_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| .start_threshold = 0, |
| .avail_min = 0, |
| }; |
| |
| struct pcm_config pcm_config_mm_ul = { |
| .channels = 2, |
| .rate = MM_FULL_POWER_SAMPLING_RATE, |
| .period_size = CAPTURE_PERIOD_SIZE, |
| .period_count = CAPTURE_PERIOD_COUNT, |
| .format = PCM_FORMAT_S16_LE, |
| }; |
| |
| struct pcm_config pcm_config_vx = { |
| .channels = 2, |
| .rate = VX_NB_SAMPLING_RATE, |
| .period_size = 160, |
| .period_count = 2, |
| .format = PCM_FORMAT_S16_LE, |
| }; |
| |
| #define MIN(x, y) ((x) > (y) ? (y) : (x)) |
| |
| struct route_setting |
| { |
| char *ctl_name; |
| int intval; |
| char *strval; |
| }; |
| |
| /* These are values that never change */ |
| struct route_setting defaults[] = { |
| /* general */ |
| { |
| .ctl_name = MIXER_DL2_LEFT_EQUALIZER, |
| .strval = MIXER_450HZ_HIGH_PASS, |
| }, |
| { |
| .ctl_name = MIXER_DL2_RIGHT_EQUALIZER, |
| .strval = MIXER_450HZ_HIGH_PASS, |
| }, |
| { |
| .ctl_name = MIXER_DL1_MEDIA_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_DL2_MEDIA_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_DL1_VOICE_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_DL2_VOICE_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_DL1_TONES_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_DL2_TONES_PLAYBACK_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_SDT_DL_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_AUDUL_VOICE_UL_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = MIXER_CAPTURE_PREAMPLIFIER_VOLUME, |
| .intval = DB_TO_CAPTURE_PREAMPLIFIER_VOLUME(0), |
| }, |
| { |
| .ctl_name = MIXER_CAPTURE_VOLUME, |
| .intval = DB_TO_CAPTURE_VOLUME(30), |
| }, |
| { |
| .ctl_name = MIXER_SDT_UL_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB - 17, |
| }, |
| { |
| .ctl_name = MIXER_SIDETONE_MIXER_CAPTURE, |
| .intval = 0, |
| }, |
| |
| /* headset */ |
| { |
| .ctl_name = MIXER_SIDETONE_MIXER_PLAYBACK, |
| .intval = 1, |
| }, |
| { |
| .ctl_name = MIXER_DL1_PDM_SWITCH, |
| .intval = 1, |
| }, |
| |
| /* bt */ |
| { |
| .ctl_name = MIXER_BT_UL_VOLUME, |
| .intval = MIXER_ABE_GAIN_0DB, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting hf_output[] = { |
| { |
| .ctl_name = MIXER_HF_LEFT_PLAYBACK, |
| .strval = MIXER_PLAYBACK_HF_DAC, |
| }, |
| { |
| .ctl_name = MIXER_HF_RIGHT_PLAYBACK, |
| .strval = MIXER_PLAYBACK_HF_DAC, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting hs_output[] = { |
| { |
| .ctl_name = MIXER_HS_LEFT_PLAYBACK, |
| .strval = MIXER_PLAYBACK_HS_DAC, |
| }, |
| { |
| .ctl_name = MIXER_HS_RIGHT_PLAYBACK, |
| .strval = MIXER_PLAYBACK_HS_DAC, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| /* MM UL front-end paths */ |
| struct route_setting mm_ul2_bt[] = { |
| { |
| .ctl_name = MIXER_MUX_UL10, |
| .strval = MIXER_BT_LEFT, |
| }, |
| { |
| .ctl_name = MIXER_MUX_UL11, |
| .strval = MIXER_BT_LEFT, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting mm_ul2_amic_left[] = { |
| { |
| .ctl_name = MIXER_MUX_UL10, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = MIXER_MUX_UL11, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting mm_ul2_amic_right[] = { |
| { |
| .ctl_name = MIXER_MUX_UL10, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = MIXER_MUX_UL11, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| /* dual mic configuration with main mic on main channel and sub mic on aux channel. |
| * Used for handset mode (near talk) */ |
| struct route_setting mm_ul2_amic_dual_main_sub[] = { |
| { |
| .ctl_name = MIXER_MUX_UL10, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = MIXER_MUX_UL11, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| /* dual mic configuration with sub mic on main channel and main mic on aux channel. |
| * Used for speakerphone mode (far talk) */ |
| struct route_setting mm_ul2_amic_dual_sub_main[] = { |
| { |
| .ctl_name = MIXER_MUX_UL10, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = MIXER_MUX_UL11, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| /* VX UL front-end paths */ |
| struct route_setting vx_ul_amic_left[] = { |
| { |
| .ctl_name = MIXER_MUX_VX0, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = MIXER_MUX_VX1, |
| .strval = MIXER_AMIC0, |
| }, |
| { |
| .ctl_name = MIXER_VOICE_CAPTURE_MIXER_CAPTURE, |
| .intval = 1, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting vx_ul_amic_right[] = { |
| { |
| .ctl_name = MIXER_MUX_VX0, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = MIXER_MUX_VX1, |
| .strval = MIXER_AMIC1, |
| }, |
| { |
| .ctl_name = MIXER_VOICE_CAPTURE_MIXER_CAPTURE, |
| .intval = 1, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct route_setting vx_ul_bt[] = { |
| { |
| .ctl_name = MIXER_MUX_VX0, |
| .strval = MIXER_BT_LEFT, |
| }, |
| { |
| .ctl_name = MIXER_MUX_VX1, |
| .strval = MIXER_BT_LEFT, |
| }, |
| { |
| .ctl_name = MIXER_VOICE_CAPTURE_MIXER_CAPTURE, |
| .intval = 1, |
| }, |
| { |
| .ctl_name = NULL, |
| }, |
| }; |
| |
| struct mixer_ctls |
| { |
| struct mixer_ctl *dl1_eq; |
| struct mixer_ctl *mm_dl1_volume; |
| struct mixer_ctl *tones_dl1_volume; |
| struct mixer_ctl *mm_dl2_volume; |
| struct mixer_ctl *vx_dl2_volume; |
| struct mixer_ctl *tones_dl2_volume; |
| struct mixer_ctl *mm_dl1; |
| struct mixer_ctl *mm_dl2; |
| struct mixer_ctl *vx_dl1; |
| struct mixer_ctl *vx_dl2; |
| struct mixer_ctl *tones_dl1; |
| struct mixer_ctl *tones_dl2; |
| struct mixer_ctl *earpiece_enable; |
| struct mixer_ctl *dl2_mono; |
| struct mixer_ctl *dl1_headset; |
| struct mixer_ctl *dl1_bt; |
| struct mixer_ctl *left_capture; |
| struct mixer_ctl *right_capture; |
| struct mixer_ctl *amic_ul_volume; |
| struct mixer_ctl *voice_ul_volume; |
| struct mixer_ctl *sidetone_capture; |
| struct mixer_ctl *headset_volume; |
| struct mixer_ctl *speaker_volume; |
| struct mixer_ctl *earpiece_volume; |
| }; |
| |
| enum output_type { |
| OUTPUT_DEEP_BUF, // deep PCM buffers output stream |
| OUTPUT_LOW_LATENCY, // low latency output stream |
| OUTPUT_HDMI, |
| OUTPUT_TOTAL |
| }; |
| |
| |
| struct tuna_audio_device { |
| struct audio_hw_device hw_device; |
| |
| pthread_mutex_t lock; /* see note below on mutex acquisition order */ |
| struct mixer *mixer; |
| struct mixer_ctls mixer_ctls; |
| audio_mode_t mode; |
| int out_device; |
| int in_device; |
| struct pcm *pcm_modem_dl; |
| struct pcm *pcm_modem_ul; |
| int in_call; |
| float voice_volume; |
| struct tuna_stream_in *active_input; |
| struct tuna_stream_out *outputs[OUTPUT_TOTAL]; |
| bool mic_mute; |
| int tty_mode; |
| struct echo_reference_itfe *echo_reference; |
| bool bluetooth_nrec; |
| bool device_is_toro; |
| int wb_amr; |
| bool screen_off; |
| |
| /* RIL */ |
| struct ril_handle ril; |
| }; |
| |
| enum pcm_type { |
| PCM_NORMAL = 0, |
| PCM_SPDIF, |
| PCM_HDMI, |
| PCM_TOTAL, |
| }; |
| |
| struct tuna_stream_out { |
| struct audio_stream_out stream; |
| |
| pthread_mutex_t lock; /* see note below on mutex acquisition order */ |
| struct pcm_config config[PCM_TOTAL]; |
| struct pcm *pcm[PCM_TOTAL]; |
| struct resampler_itfe *resampler; |
| char *buffer; |
| size_t buffer_frames; |
| int standby; |
| struct echo_reference_itfe *echo_reference; |
| int write_threshold; |
| bool use_long_periods; |
| audio_channel_mask_t channel_mask; |
| audio_channel_mask_t sup_channel_masks[3]; |
| |
| /* FIXME: workaround for HDMI multi channel channel swap on first playback after opening |
| * the output stream: force reopening the pcm driver after writing a few periods. */ |
| int restart_periods_cnt; |
| |
| struct tuna_audio_device *dev; |
| }; |
| |
| #define MAX_PREPROCESSORS 3 /* maximum one AGC + one NS + one AEC per input stream */ |
| |
| struct effect_info_s { |
| effect_handle_t effect_itfe; |
| size_t num_channel_configs; |
| channel_config_t* channel_configs; |
| }; |
| |
| #define NUM_IN_AUX_CNL_CONFIGS 2 |
| channel_config_t in_aux_cnl_configs[NUM_IN_AUX_CNL_CONFIGS] = { |
| { AUDIO_CHANNEL_IN_FRONT , AUDIO_CHANNEL_IN_BACK}, |
| { AUDIO_CHANNEL_IN_STEREO , AUDIO_CHANNEL_IN_RIGHT} |
| }; |
| |
| |
| struct tuna_stream_in { |
| struct audio_stream_in stream; |
| |
| pthread_mutex_t lock; /* see note below on mutex acquisition order */ |
| struct pcm_config config; |
| struct pcm *pcm; |
| int device; |
| struct resampler_itfe *resampler; |
| struct resampler_buffer_provider buf_provider; |
| unsigned int requested_rate; |
| int standby; |
| int source; |
| struct echo_reference_itfe *echo_reference; |
| bool need_echo_reference; |
| |
| int16_t *read_buf; |
| size_t read_buf_size; |
| size_t read_buf_frames; |
| |
| int16_t *proc_buf_in; |
| int16_t *proc_buf_out; |
| size_t proc_buf_size; |
| size_t proc_buf_frames; |
| |
| int16_t *ref_buf; |
| size_t ref_buf_size; |
| size_t ref_buf_frames; |
| |
| int read_status; |
| |
| int num_preprocessors; |
| struct effect_info_s preprocessors[MAX_PREPROCESSORS]; |
| |
| bool aux_channels_changed; |
| uint32_t main_channels; |
| uint32_t aux_channels; |
| struct tuna_audio_device *dev; |
| }; |
| |
| |
| #define STRING_TO_ENUM(string) { #string, string } |
| |
| struct string_to_enum { |
| const char *name; |
| uint32_t value; |
| }; |
| |
| const struct string_to_enum out_channels_name_to_enum_table[] = { |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_STEREO), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_5POINT1), |
| STRING_TO_ENUM(AUDIO_CHANNEL_OUT_7POINT1), |
| }; |
| |
| |
| /** |
| * NOTE: when multiple mutexes have to be acquired, always respect the following order: |
| * hw device > in stream > out stream |
| */ |
| |
| |
| static void select_output_device(struct tuna_audio_device *adev); |
| static void select_input_device(struct tuna_audio_device *adev); |
| static int adev_set_voice_volume(struct audio_hw_device *dev, float volume); |
| static int do_input_standby(struct tuna_stream_in *in); |
| static int do_output_standby(struct tuna_stream_out *out); |
| static void in_update_aux_channels(struct tuna_stream_in *in, effect_handle_t effect); |
| |
| /* Returns true on devices that are toro, false otherwise */ |
| static int is_device_toro(void) |
| { |
| char property[PROPERTY_VALUE_MAX]; |
| |
| property_get(PRODUCT_DEVICE_PROPERTY, property, PRODUCT_DEVICE_TORO); |
| |
| /* return true if the property matches the given value */ |
| return strcmp(property, PRODUCT_DEVICE_TORO) == 0; |
| } |
| |
| /* The enable flag when 0 makes the assumption that enums are disabled by |
| * "Off" and integers/booleans by 0 */ |
| static int set_route_by_array(struct mixer *mixer, struct route_setting *route, |
| int enable) |
| { |
| struct mixer_ctl *ctl; |
| unsigned int i, j; |
| |
| /* Go through the route array and set each value */ |
| i = 0; |
| while (route[i].ctl_name) { |
| ctl = mixer_get_ctl_by_name(mixer, route[i].ctl_name); |
| if (!ctl) |
| return -EINVAL; |
| |
| if (route[i].strval) { |
| if (enable) |
| mixer_ctl_set_enum_by_string(ctl, route[i].strval); |
| else |
| mixer_ctl_set_enum_by_string(ctl, "Off"); |
| } else { |
| /* This ensures multiple (i.e. stereo) values are set jointly */ |
| for (j = 0; j < mixer_ctl_get_num_values(ctl); j++) { |
| if (enable) |
| mixer_ctl_set_value(ctl, j, route[i].intval); |
| else |
| mixer_ctl_set_value(ctl, j, 0); |
| } |
| } |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| static int start_call(struct tuna_audio_device *adev) |
| { |
| ALOGE("Opening modem PCMs"); |
| |
| pcm_config_vx.rate = adev->wb_amr ? VX_WB_SAMPLING_RATE : VX_NB_SAMPLING_RATE; |
| |
| /* Open modem PCM channels */ |
| if (adev->pcm_modem_dl == NULL) { |
| adev->pcm_modem_dl = pcm_open(0, PORT_MODEM, PCM_OUT, &pcm_config_vx); |
| if (!pcm_is_ready(adev->pcm_modem_dl)) { |
| ALOGE("cannot open PCM modem DL stream: %s", pcm_get_error(adev->pcm_modem_dl)); |
| goto err_open_dl; |
| } |
| } |
| |
| if (adev->pcm_modem_ul == NULL) { |
| adev->pcm_modem_ul = pcm_open(0, PORT_MODEM, PCM_IN, &pcm_config_vx); |
| if (!pcm_is_ready(adev->pcm_modem_ul)) { |
| ALOGE("cannot open PCM modem UL stream: %s", pcm_get_error(adev->pcm_modem_ul)); |
| goto err_open_ul; |
| } |
| } |
| |
| pcm_start(adev->pcm_modem_dl); |
| pcm_start(adev->pcm_modem_ul); |
| |
| return 0; |
| |
| err_open_ul: |
| pcm_close(adev->pcm_modem_ul); |
| adev->pcm_modem_ul = NULL; |
| err_open_dl: |
| pcm_close(adev->pcm_modem_dl); |
| adev->pcm_modem_dl = NULL; |
| |
| return -ENOMEM; |
| } |
| |
| static void end_call(struct tuna_audio_device *adev) |
| { |
| ALOGE("Closing modem PCMs"); |
| |
| pcm_stop(adev->pcm_modem_dl); |
| pcm_stop(adev->pcm_modem_ul); |
| pcm_close(adev->pcm_modem_dl); |
| pcm_close(adev->pcm_modem_ul); |
| adev->pcm_modem_dl = NULL; |
| adev->pcm_modem_ul = NULL; |
| } |
| |
| static void set_eq_filter(struct tuna_audio_device *adev) |
| { |
| /* DL1_EQ can't be used for bt */ |
| int dl1_eq_applicable = adev->out_device & (AUDIO_DEVICE_OUT_WIRED_HEADSET | |
| AUDIO_DEVICE_OUT_WIRED_HEADPHONE | AUDIO_DEVICE_OUT_EARPIECE); |
| |
| /* 4Khz LPF is used only in NB-AMR voicecall */ |
| if ((adev->mode == AUDIO_MODE_IN_CALL) && dl1_eq_applicable && |
| (adev->tty_mode == TTY_MODE_OFF) && !adev->wb_amr) |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.dl1_eq, MIXER_4KHZ_LPF_0DB); |
| else |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.dl1_eq, MIXER_FLAT_RESPONSE); |
| } |
| |
| void audio_set_wb_amr_callback(void *data, int enable) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)data; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (adev->wb_amr != enable) { |
| adev->wb_amr = enable; |
| |
| /* reopen the modem PCMs at the new rate */ |
| if (adev->in_call) { |
| end_call(adev); |
| set_eq_filter(adev); |
| start_call(adev); |
| } |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| static void set_incall_device(struct tuna_audio_device *adev) |
| { |
| int device_type; |
| |
| switch(adev->out_device) { |
| case AUDIO_DEVICE_OUT_EARPIECE: |
| device_type = SOUND_AUDIO_PATH_HANDSET; |
| break; |
| case AUDIO_DEVICE_OUT_SPEAKER: |
| case AUDIO_DEVICE_OUT_AUX_DIGITAL: |
| case AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET: |
| device_type = SOUND_AUDIO_PATH_SPEAKER; |
| break; |
| case AUDIO_DEVICE_OUT_WIRED_HEADSET: |
| device_type = SOUND_AUDIO_PATH_HEADSET; |
| break; |
| case AUDIO_DEVICE_OUT_WIRED_HEADPHONE: |
| device_type = SOUND_AUDIO_PATH_HEADPHONE; |
| break; |
| case AUDIO_DEVICE_OUT_BLUETOOTH_SCO: |
| case AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET: |
| case AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT: |
| if (adev->bluetooth_nrec) |
| device_type = SOUND_AUDIO_PATH_BLUETOOTH; |
| else |
| device_type = SOUND_AUDIO_PATH_BLUETOOTH_NO_NR; |
| break; |
| default: |
| device_type = SOUND_AUDIO_PATH_HANDSET; |
| break; |
| } |
| |
| /* if output device isn't supported, open modem side to handset by default */ |
| ril_set_call_audio_path(&adev->ril, device_type); |
| } |
| |
| static void set_input_volumes(struct tuna_audio_device *adev, int main_mic_on, |
| int headset_mic_on, int sub_mic_on) |
| { |
| unsigned int channel; |
| int volume = MIXER_ABE_GAIN_0DB; |
| |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| int sub_mic_volume = is_device_toro() ? VOICE_CALL_SUB_MIC_VOLUME_TORO : |
| VOICE_CALL_SUB_MIC_VOLUME_MAGURO; |
| /* special case: don't look at input source for IN_CALL state */ |
| volume = DB_TO_ABE_GAIN(main_mic_on ? VOICE_CALL_MAIN_MIC_VOLUME : |
| (headset_mic_on ? VOICE_CALL_HEADSET_MIC_VOLUME : |
| (sub_mic_on ? sub_mic_volume : 0))); |
| } else if (adev->active_input) { |
| /* determine input volume by use case */ |
| switch (adev->active_input->source) { |
| case AUDIO_SOURCE_MIC: /* general capture */ |
| volume = DB_TO_ABE_GAIN(main_mic_on ? CAPTURE_MAIN_MIC_VOLUME : |
| (headset_mic_on ? CAPTURE_HEADSET_MIC_VOLUME : |
| (sub_mic_on ? CAPTURE_SUB_MIC_VOLUME : 0))); |
| break; |
| |
| case AUDIO_SOURCE_CAMCORDER: |
| volume = DB_TO_ABE_GAIN(main_mic_on ? CAMCORDER_MAIN_MIC_VOLUME : |
| (headset_mic_on ? CAMCORDER_HEADSET_MIC_VOLUME : |
| (sub_mic_on ? CAMCORDER_SUB_MIC_VOLUME : 0))); |
| break; |
| |
| case AUDIO_SOURCE_VOICE_RECOGNITION: |
| volume = DB_TO_ABE_GAIN(main_mic_on ? VOICE_RECOGNITION_MAIN_MIC_VOLUME : |
| (headset_mic_on ? VOICE_RECOGNITION_HEADSET_MIC_VOLUME : |
| (sub_mic_on ? VOICE_RECOGNITION_SUB_MIC_VOLUME : 0))); |
| break; |
| |
| case AUDIO_SOURCE_VOICE_COMMUNICATION: /* VoIP */ |
| volume = DB_TO_ABE_GAIN(main_mic_on ? VOIP_MAIN_MIC_VOLUME : |
| (headset_mic_on ? VOIP_HEADSET_MIC_VOLUME : |
| (sub_mic_on ? VOIP_SUB_MIC_VOLUME : 0))); |
| break; |
| |
| default: |
| /* nothing to do */ |
| break; |
| } |
| } |
| |
| for (channel = 0; channel < 2; channel++) |
| mixer_ctl_set_value(adev->mixer_ctls.amic_ul_volume, channel, volume); |
| } |
| |
| static void set_output_volumes(struct tuna_audio_device *adev, bool tty_volume) |
| { |
| unsigned int channel; |
| int speaker_volume; |
| int headset_volume; |
| int earpiece_volume; |
| bool toro = adev->device_is_toro; |
| int headphone_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; |
| int speaker_on = adev->out_device & AUDIO_DEVICE_OUT_SPEAKER; |
| int speaker_volume_overrange = MIXER_ABE_GAIN_0DB; |
| int speaker_max_db = |
| DB_FROM_SPEAKER_VOLUME(mixer_ctl_get_range_max(adev->mixer_ctls.speaker_volume)); |
| int normal_speaker_volume = toro ? NORMAL_SPEAKER_VOLUME_TORO : |
| NORMAL_SPEAKER_VOLUME_MAGURO; |
| int normal_headphone_volume = toro ? NORMAL_HEADPHONE_VOLUME_TORO : |
| NORMAL_HEADPHONE_VOLUME_MAGURO; |
| int normal_headset_volume = toro ? NORMAL_HEADSET_VOLUME_TORO : |
| NORMAL_HEADSET_VOLUME_MAGURO; |
| int normal_earpiece_volume = toro ? NORMAL_EARPIECE_VOLUME_TORO : |
| NORMAL_EARPIECE_VOLUME_MAGURO; |
| int dl1_volume_correction = 0; |
| int dl2_volume_correction = 0; |
| |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| /* Voice call */ |
| speaker_volume = toro ? VOICE_CALL_SPEAKER_VOLUME_TORO : |
| VOICE_CALL_SPEAKER_VOLUME_MAGURO; |
| headset_volume = toro ? VOICE_CALL_HEADSET_VOLUME_TORO : |
| VOICE_CALL_HEADSET_VOLUME_MAGURO; |
| earpiece_volume = toro ? VOICE_CALL_EARPIECE_VOLUME_TORO : |
| VOICE_CALL_EARPIECE_VOLUME_MAGURO; |
| } else if (adev->mode == AUDIO_MODE_IN_COMMUNICATION) { |
| /* VoIP */ |
| speaker_volume = toro ? VOIP_SPEAKER_VOLUME_TORO : |
| VOIP_SPEAKER_VOLUME_MAGURO; |
| headset_volume = toro ? VOIP_HEADSET_VOLUME_TORO : |
| VOIP_HEADSET_VOLUME_MAGURO; |
| earpiece_volume = toro ? VOIP_EARPIECE_VOLUME_TORO : |
| VOIP_EARPIECE_VOLUME_MAGURO; |
| } else { |
| /* Media */ |
| speaker_volume = normal_speaker_volume; |
| if (headphone_on) |
| headset_volume = normal_headphone_volume; |
| else |
| headset_volume = normal_headset_volume; |
| earpiece_volume = normal_earpiece_volume; |
| } |
| |
| if (tty_volume) |
| headset_volume = HEADPHONE_VOLUME_TTY; |
| else if (adev->mode == AUDIO_MODE_RINGTONE) |
| headset_volume += RINGTONE_HEADSET_VOLUME_OFFSET; |
| |
| /* apply correction on digital volume to keep the overall volume consistent if the |
| * analog volume is not driven by media use case |
| */ |
| if (headphone_on) |
| dl1_volume_correction = normal_headphone_volume - headset_volume; |
| else if (adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADSET) |
| dl1_volume_correction = normal_headset_volume - headset_volume; |
| else |
| dl1_volume_correction = normal_earpiece_volume - earpiece_volume; |
| |
| if (speaker_on) |
| dl2_volume_correction = normal_speaker_volume - speaker_volume; |
| |
| /* If we have run out of range in the codec (analog) speaker volume, |
| we have to apply the remainder of the dB increase to the DL2 |
| media/voice mixer volume, which is a digital gain */ |
| if (speaker_volume > speaker_max_db) { |
| speaker_volume_overrange += (speaker_volume - speaker_max_db); |
| speaker_volume = speaker_max_db; |
| } |
| |
| for (channel = 0; channel < 2; channel++) { |
| mixer_ctl_set_value(adev->mixer_ctls.speaker_volume, channel, |
| DB_TO_SPEAKER_VOLUME(speaker_volume)); |
| mixer_ctl_set_value(adev->mixer_ctls.headset_volume, channel, |
| DB_TO_HEADSET_VOLUME(headset_volume)); |
| } |
| |
| if (!speaker_on) |
| speaker_volume_overrange = MIXER_ABE_GAIN_0DB; |
| |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl1_volume, 0, |
| MIXER_ABE_GAIN_0DB + dl1_volume_correction); |
| mixer_ctl_set_value(adev->mixer_ctls.vx_dl2_volume, 0, |
| speaker_volume_overrange); |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl2_volume, 0, |
| speaker_volume_overrange + dl2_volume_correction); |
| } else if (adev->mode == AUDIO_MODE_IN_COMMUNICATION) { |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl1_volume, 0, |
| MIXER_ABE_GAIN_0DB); |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl2_volume, 0, |
| speaker_volume_overrange); |
| } else { |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl1_volume, 0, |
| MIXER_ABE_GAIN_0DB + dl1_volume_correction); |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl2_volume, 0, |
| speaker_volume_overrange + dl2_volume_correction); |
| } |
| |
| mixer_ctl_set_value(adev->mixer_ctls.mm_dl1_volume, 0, |
| MIXER_ABE_GAIN_0DB + dl1_volume_correction); |
| mixer_ctl_set_value(adev->mixer_ctls.mm_dl2_volume, 0, |
| speaker_volume_overrange + dl2_volume_correction); |
| |
| mixer_ctl_set_value(adev->mixer_ctls.earpiece_volume, 0, |
| DB_TO_EARPIECE_VOLUME(earpiece_volume)); |
| } |
| |
| static void force_all_standby(struct tuna_audio_device *adev) |
| { |
| struct tuna_stream_in *in; |
| struct tuna_stream_out *out; |
| |
| /* only needed for low latency output streams as other streams are not used |
| * for voice use cases */ |
| if (adev->outputs[OUTPUT_LOW_LATENCY] != NULL && |
| !adev->outputs[OUTPUT_LOW_LATENCY]->standby) { |
| out = adev->outputs[OUTPUT_LOW_LATENCY]; |
| pthread_mutex_lock(&out->lock); |
| do_output_standby(out); |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| if (adev->active_input) { |
| in = adev->active_input; |
| pthread_mutex_lock(&in->lock); |
| do_input_standby(in); |
| pthread_mutex_unlock(&in->lock); |
| } |
| } |
| |
| static void select_mode(struct tuna_audio_device *adev) |
| { |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| ALOGE("Entering IN_CALL state, in_call=%d", adev->in_call); |
| if (!adev->in_call) { |
| force_all_standby(adev); |
| /* force earpiece route for in call state if speaker is the |
| only currently selected route. This prevents having to tear |
| down the modem PCMs to change route from speaker to earpiece |
| after the ringtone is played, but doesn't cause a route |
| change if a headset or bt device is already connected. If |
| speaker is not the only thing active, just remove it from |
| the route. We'll assume it'll never be used initially during |
| a call. This works because we're sure that the audio policy |
| manager will update the output device after the audio mode |
| change, even if the device selection did not change. */ |
| if (adev->out_device == AUDIO_DEVICE_OUT_SPEAKER) { |
| adev->out_device = AUDIO_DEVICE_OUT_EARPIECE; |
| adev->in_device = AUDIO_DEVICE_IN_BUILTIN_MIC & ~AUDIO_DEVICE_BIT_IN; |
| } else |
| adev->out_device &= ~AUDIO_DEVICE_OUT_SPEAKER; |
| select_output_device(adev); |
| start_call(adev); |
| ril_set_call_volume(&adev->ril, SOUND_TYPE_VOICE, adev->voice_volume); |
| adev->in_call = 1; |
| } |
| } else { |
| ALOGE("Leaving IN_CALL state, in_call=%d, mode=%d", |
| adev->in_call, adev->mode); |
| if (adev->in_call) { |
| adev->in_call = 0; |
| end_call(adev); |
| force_all_standby(adev); |
| select_output_device(adev); |
| select_input_device(adev); |
| } |
| } |
| } |
| |
| static void select_output_device(struct tuna_audio_device *adev) |
| { |
| int headset_on; |
| int headphone_on; |
| int speaker_on; |
| int earpiece_on; |
| int bt_on; |
| int dl1_on; |
| int sidetone_capture_on = 0; |
| bool tty_volume = false; |
| unsigned int channel; |
| |
| /* Mute VX_UL to avoid pop noises in the tx path |
| * during call before switch changes. |
| */ |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| for (channel = 0; channel < 2; channel++) |
| mixer_ctl_set_value(adev->mixer_ctls.voice_ul_volume, |
| channel, 0); |
| } |
| |
| headset_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADSET; |
| headphone_on = adev->out_device & AUDIO_DEVICE_OUT_WIRED_HEADPHONE; |
| speaker_on = adev->out_device & AUDIO_DEVICE_OUT_SPEAKER; |
| earpiece_on = adev->out_device & AUDIO_DEVICE_OUT_EARPIECE; |
| bt_on = adev->out_device & AUDIO_DEVICE_OUT_ALL_SCO; |
| |
| /* force rx path according to TTY mode when in call */ |
| if (adev->mode == AUDIO_MODE_IN_CALL && !bt_on) { |
| switch(adev->tty_mode) { |
| case TTY_MODE_FULL: |
| case TTY_MODE_VCO: |
| /* rx path to headphones */ |
| headphone_on = 1; |
| headset_on = 0; |
| speaker_on = 0; |
| earpiece_on = 0; |
| tty_volume = true; |
| break; |
| case TTY_MODE_HCO: |
| /* rx path to device speaker */ |
| headphone_on = 0; |
| headset_on = 0; |
| speaker_on = 1; |
| earpiece_on = 0; |
| break; |
| case TTY_MODE_OFF: |
| default: |
| /* force speaker on when in call and HDMI or S/PDIF is selected |
| * as voice DL audio cannot be routed there by ABE */ |
| if (adev->out_device & |
| (AUDIO_DEVICE_OUT_AUX_DIGITAL | |
| AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) |
| speaker_on = 1; |
| break; |
| } |
| } |
| |
| dl1_on = headset_on | headphone_on | earpiece_on | bt_on; |
| |
| /* Select front end */ |
| mixer_ctl_set_value(adev->mixer_ctls.mm_dl2, 0, speaker_on); |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl2, 0, speaker_on); |
| mixer_ctl_set_value(adev->mixer_ctls.vx_dl2, 0, |
| speaker_on && (adev->mode == AUDIO_MODE_IN_CALL)); |
| mixer_ctl_set_value(adev->mixer_ctls.mm_dl1, 0, dl1_on); |
| mixer_ctl_set_value(adev->mixer_ctls.tones_dl1, 0, dl1_on); |
| mixer_ctl_set_value(adev->mixer_ctls.vx_dl1, 0, |
| dl1_on && (adev->mode == AUDIO_MODE_IN_CALL)); |
| /* Select back end */ |
| mixer_ctl_set_value(adev->mixer_ctls.dl1_headset, 0, |
| headset_on | headphone_on | earpiece_on); |
| mixer_ctl_set_value(adev->mixer_ctls.dl1_bt, 0, bt_on); |
| mixer_ctl_set_value(adev->mixer_ctls.dl2_mono, 0, |
| (adev->mode != AUDIO_MODE_IN_CALL) && speaker_on); |
| mixer_ctl_set_value(adev->mixer_ctls.earpiece_enable, 0, earpiece_on); |
| |
| /* select output stage */ |
| set_route_by_array(adev->mixer, hs_output, headset_on | headphone_on); |
| set_route_by_array(adev->mixer, hf_output, speaker_on); |
| |
| set_eq_filter(adev); |
| set_output_volumes(adev, tty_volume); |
| |
| /* Special case: select input path if in a call, otherwise |
| in_set_parameters is used to update the input route |
| todo: use sub mic for handsfree case */ |
| if (adev->mode == AUDIO_MODE_IN_CALL) { |
| if (bt_on) |
| set_route_by_array(adev->mixer, vx_ul_bt, bt_on); |
| else { |
| /* force tx path according to TTY mode when in call */ |
| switch(adev->tty_mode) { |
| case TTY_MODE_FULL: |
| case TTY_MODE_HCO: |
| /* tx path from headset mic */ |
| headphone_on = 0; |
| headset_on = 1; |
| speaker_on = 0; |
| earpiece_on = 0; |
| break; |
| case TTY_MODE_VCO: |
| /* tx path from device sub mic */ |
| headphone_on = 0; |
| headset_on = 0; |
| speaker_on = 1; |
| earpiece_on = 0; |
| break; |
| case TTY_MODE_OFF: |
| default: |
| break; |
| } |
| |
| if (headset_on || headphone_on || earpiece_on) |
| set_route_by_array(adev->mixer, vx_ul_amic_left, 1); |
| else if (speaker_on) |
| set_route_by_array(adev->mixer, vx_ul_amic_right, 1); |
| else |
| set_route_by_array(adev->mixer, vx_ul_amic_left, 0); |
| |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.left_capture, |
| (earpiece_on || headphone_on) ? MIXER_MAIN_MIC : |
| (headset_on ? MIXER_HS_MIC : "Off")); |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.right_capture, |
| speaker_on ? MIXER_SUB_MIC : "Off"); |
| |
| set_input_volumes(adev, earpiece_on || headphone_on, |
| headset_on, speaker_on); |
| |
| /* enable sidetone mixer capture if needed */ |
| sidetone_capture_on = earpiece_on && adev->device_is_toro; |
| } |
| |
| set_incall_device(adev); |
| |
| /* Unmute VX_UL after the switch */ |
| for (channel = 0; channel < 2; channel++) { |
| mixer_ctl_set_value(adev->mixer_ctls.voice_ul_volume, |
| channel, MIXER_ABE_GAIN_0DB); |
| } |
| } |
| |
| mixer_ctl_set_value(adev->mixer_ctls.sidetone_capture, 0, sidetone_capture_on); |
| } |
| |
| static void select_input_device(struct tuna_audio_device *adev) |
| { |
| int headset_on = 0; |
| int main_mic_on = 0; |
| int sub_mic_on = 0; |
| int bt_on = adev->in_device & AUDIO_DEVICE_IN_ALL_SCO; |
| |
| if (!bt_on) { |
| if ((adev->mode != AUDIO_MODE_IN_CALL) && (adev->active_input != 0)) { |
| /* sub mic is used for camcorder or VoIP on speaker phone */ |
| sub_mic_on = (adev->active_input->source == AUDIO_SOURCE_CAMCORDER) || |
| ((adev->out_device & AUDIO_DEVICE_OUT_SPEAKER) && |
| (adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION)); |
| } |
| if (!sub_mic_on) { |
| headset_on = adev->in_device & AUDIO_DEVICE_IN_WIRED_HEADSET; |
| main_mic_on = adev->in_device & AUDIO_DEVICE_IN_BUILTIN_MIC; |
| } |
| } |
| |
| /* TODO: check how capture is possible during voice calls or if |
| * both use cases are mutually exclusive. |
| */ |
| if (bt_on) |
| set_route_by_array(adev->mixer, mm_ul2_bt, 1); |
| else { |
| /* Select front end */ |
| |
| |
| if ((adev->active_input != 0) && (adev->active_input->aux_channels)) { |
| ALOGV("select input device(): multi-mic configuration main mic %s sub mic %s", |
| main_mic_on ? "ON" : "OFF", sub_mic_on ? "ON" : "OFF"); |
| if (main_mic_on) { |
| set_route_by_array(adev->mixer, mm_ul2_amic_dual_main_sub, 1); |
| sub_mic_on = 1; |
| } |
| else if (sub_mic_on) { |
| set_route_by_array(adev->mixer, mm_ul2_amic_dual_sub_main, 1); |
| main_mic_on = 1; |
| } |
| else { |
| set_route_by_array(adev->mixer, mm_ul2_amic_dual_main_sub, 0); |
| } |
| } else { |
| ALOGV("select input device(): single mic configuration"); |
| if (main_mic_on || headset_on) |
| set_route_by_array(adev->mixer, mm_ul2_amic_left, 1); |
| else if (sub_mic_on) |
| set_route_by_array(adev->mixer, mm_ul2_amic_right, 1); |
| else |
| set_route_by_array(adev->mixer, mm_ul2_amic_left, 0); |
| } |
| |
| |
| /* Select back end */ |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.right_capture, |
| sub_mic_on ? MIXER_SUB_MIC : "Off"); |
| mixer_ctl_set_enum_by_string(adev->mixer_ctls.left_capture, |
| main_mic_on ? MIXER_MAIN_MIC : |
| (headset_on ? MIXER_HS_MIC : "Off")); |
| } |
| |
| set_input_volumes(adev, main_mic_on, headset_on, sub_mic_on); |
| } |
| |
| /* must be called with hw device and output stream mutexes locked */ |
| static int start_output_stream_low_latency(struct tuna_stream_out *out) |
| { |
| struct tuna_audio_device *adev = out->dev; |
| #ifdef PLAYBACK_MMAP |
| unsigned int flags = PCM_OUT | PCM_MMAP | PCM_NOIRQ; |
| #else |
| unsigned int flags = PCM_OUT; |
| #endif |
| int i; |
| bool success = true; |
| |
| if (adev->mode != AUDIO_MODE_IN_CALL) { |
| select_output_device(adev); |
| } |
| |
| /* default to low power: will be corrected in out_write if necessary before first write to |
| * tinyalsa. |
| */ |
| |
| if (adev->out_device & ~(AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET | AUDIO_DEVICE_OUT_AUX_DIGITAL)) { |
| /* Something not a dock in use */ |
| out->config[PCM_NORMAL] = pcm_config_tones; |
| out->config[PCM_NORMAL].rate = MM_FULL_POWER_SAMPLING_RATE; |
| out->pcm[PCM_NORMAL] = pcm_open(CARD_TUNA_DEFAULT, PORT_TONES, |
| flags, &out->config[PCM_NORMAL]); |
| } |
| |
| if (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) { |
| /* SPDIF output in use */ |
| out->config[PCM_SPDIF] = pcm_config_tones; |
| out->config[PCM_SPDIF].rate = MM_FULL_POWER_SAMPLING_RATE; |
| out->pcm[PCM_SPDIF] = pcm_open(CARD_TUNA_DEFAULT, PORT_SPDIF, |
| flags, &out->config[PCM_SPDIF]); |
| } |
| |
| /* priority is given to multichannel HDMI output */ |
| if ((adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL) && |
| (adev->outputs[OUTPUT_HDMI] == NULL || adev->outputs[OUTPUT_HDMI]->standby)) { |
| /* HDMI output in use */ |
| out->config[PCM_HDMI] = pcm_config_tones; |
| out->config[PCM_HDMI].rate = MM_LOW_POWER_SAMPLING_RATE; |
| out->pcm[PCM_HDMI] = pcm_open(CARD_OMAP4_HDMI, PORT_HDMI, |
| flags, &out->config[PCM_HDMI]); |
| } |
| |
| /* Close any PCMs that could not be opened properly and return an error */ |
| for (i = 0; i < PCM_TOTAL; i++) { |
| if (out->pcm[i] && !pcm_is_ready(out->pcm[i])) { |
| ALOGE("cannot open pcm_out driver %d: %s", i, pcm_get_error(out->pcm[i])); |
| pcm_close(out->pcm[i]); |
| out->pcm[i] = NULL; |
| success = false; |
| } |
| } |
| |
| if (success) { |
| out->buffer_frames = pcm_config_tones.period_size * 2; |
| if (out->buffer == NULL) |
| out->buffer = malloc(out->buffer_frames * audio_stream_frame_size(&out->stream.common)); |
| |
| if (adev->echo_reference != NULL) |
| out->echo_reference = adev->echo_reference; |
| out->resampler->reset(out->resampler); |
| |
| return 0; |
| } |
| |
| return -ENOMEM; |
| } |
| |
| /* must be called with hw device and output stream mutexes locked */ |
| static int start_output_stream_deep_buffer(struct tuna_stream_out *out) |
| { |
| struct tuna_audio_device *adev = out->dev; |
| |
| if (adev->mode != AUDIO_MODE_IN_CALL) { |
| select_output_device(adev); |
| } |
| |
| out->write_threshold = PLAYBACK_DEEP_BUFFER_LONG_PERIOD_COUNT * DEEP_BUFFER_LONG_PERIOD_SIZE; |
| out->use_long_periods = true; |
| |
| out->config[PCM_NORMAL] = pcm_config_mm; |
| out->config[PCM_NORMAL].rate = MM_FULL_POWER_SAMPLING_RATE; |
| out->pcm[PCM_NORMAL] = pcm_open(CARD_TUNA_DEFAULT, PORT_MM, |
| PCM_OUT | PCM_MMAP | PCM_NOIRQ, &out->config[PCM_NORMAL]); |
| if (out->pcm[PCM_NORMAL] && !pcm_is_ready(out->pcm[PCM_NORMAL])) { |
| ALOGE("cannot open pcm_out driver: %s", pcm_get_error(out->pcm[PCM_NORMAL])); |
| pcm_close(out->pcm[PCM_NORMAL]); |
| out->pcm[PCM_NORMAL] = NULL; |
| return -ENOMEM; |
| } |
| out->buffer_frames = DEEP_BUFFER_SHORT_PERIOD_SIZE * 2; |
| if (out->buffer == NULL) |
| out->buffer = malloc(out->buffer_frames * audio_stream_frame_size(&out->stream.common)); |
| |
| return 0; |
| } |
| |
| static int start_output_stream_hdmi(struct tuna_stream_out *out) |
| { |
| struct tuna_audio_device *adev = out->dev; |
| |
| /* force standby on low latency output stream to close HDMI driver in case it was in use */ |
| if (adev->outputs[OUTPUT_LOW_LATENCY] != NULL && |
| !adev->outputs[OUTPUT_LOW_LATENCY]->standby) { |
| struct tuna_stream_out *ll_out = adev->outputs[OUTPUT_LOW_LATENCY]; |
| pthread_mutex_lock(&ll_out->lock); |
| do_output_standby(ll_out); |
| pthread_mutex_unlock(&ll_out->lock); |
| } |
| |
| out->pcm[PCM_HDMI] = pcm_open(CARD_OMAP4_HDMI, PORT_HDMI, PCM_OUT, &out->config[PCM_HDMI]); |
| |
| if (out->pcm[PCM_HDMI] && !pcm_is_ready(out->pcm[PCM_HDMI])) { |
| ALOGE("cannot open pcm_out driver: %s", pcm_get_error(out->pcm[PCM_HDMI])); |
| pcm_close(out->pcm[PCM_HDMI]); |
| out->pcm[PCM_HDMI] = NULL; |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static int check_input_parameters(uint32_t sample_rate, audio_format_t format, int channel_count) |
| { |
| if (format != AUDIO_FORMAT_PCM_16_BIT) |
| return -EINVAL; |
| |
| if ((channel_count < 1) || (channel_count > 2)) |
| return -EINVAL; |
| |
| switch(sample_rate) { |
| case 8000: |
| case 11025: |
| case 16000: |
| case 22050: |
| case 24000: |
| case 32000: |
| case 44100: |
| case 48000: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static size_t get_input_buffer_size(uint32_t sample_rate, audio_format_t format, int channel_count) |
| { |
| size_t size; |
| size_t device_rate; |
| |
| if (check_input_parameters(sample_rate, format, channel_count) != 0) |
| return 0; |
| |
| /* take resampling into account and return the closest majoring |
| multiple of 16 frames, as audioflinger expects audio buffers to |
| be a multiple of 16 frames */ |
| size = (pcm_config_mm_ul.period_size * sample_rate) / pcm_config_mm_ul.rate; |
| size = ((size + 15) / 16) * 16; |
| |
| return size * channel_count * sizeof(short); |
| } |
| |
| static void add_echo_reference(struct tuna_stream_out *out, |
| struct echo_reference_itfe *reference) |
| { |
| pthread_mutex_lock(&out->lock); |
| out->echo_reference = reference; |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| static void remove_echo_reference(struct tuna_stream_out *out, |
| struct echo_reference_itfe *reference) |
| { |
| pthread_mutex_lock(&out->lock); |
| if (out->echo_reference == reference) { |
| /* stop writing to echo reference */ |
| reference->write(reference, NULL); |
| out->echo_reference = NULL; |
| } |
| pthread_mutex_unlock(&out->lock); |
| } |
| |
| static void put_echo_reference(struct tuna_audio_device *adev, |
| struct echo_reference_itfe *reference) |
| { |
| if (adev->echo_reference != NULL && |
| reference == adev->echo_reference) { |
| /* echo reference is taken from the low latency output stream used |
| * for voice use cases */ |
| if (adev->outputs[OUTPUT_LOW_LATENCY] != NULL && |
| !adev->outputs[OUTPUT_LOW_LATENCY]->standby) |
| remove_echo_reference(adev->outputs[OUTPUT_LOW_LATENCY], reference); |
| release_echo_reference(reference); |
| adev->echo_reference = NULL; |
| } |
| } |
| |
| static struct echo_reference_itfe *get_echo_reference(struct tuna_audio_device *adev, |
| audio_format_t format, |
| uint32_t channel_count, |
| uint32_t sampling_rate) |
| { |
| put_echo_reference(adev, adev->echo_reference); |
| /* echo reference is taken from the low latency output stream used |
| * for voice use cases */ |
| if (adev->outputs[OUTPUT_LOW_LATENCY] != NULL && |
| !adev->outputs[OUTPUT_LOW_LATENCY]->standby) { |
| struct audio_stream *stream = |
| &adev->outputs[OUTPUT_LOW_LATENCY]->stream.common; |
| uint32_t wr_channel_count = popcount(stream->get_channels(stream)); |
| uint32_t wr_sampling_rate = stream->get_sample_rate(stream); |
| |
| int status = create_echo_reference(AUDIO_FORMAT_PCM_16_BIT, |
| channel_count, |
| sampling_rate, |
| AUDIO_FORMAT_PCM_16_BIT, |
| wr_channel_count, |
| wr_sampling_rate, |
| &adev->echo_reference); |
| if (status == 0) |
| add_echo_reference(adev->outputs[OUTPUT_LOW_LATENCY], |
| adev->echo_reference); |
| } |
| return adev->echo_reference; |
| } |
| |
| static int get_playback_delay(struct tuna_stream_out *out, |
| size_t frames, |
| struct echo_reference_buffer *buffer) |
| { |
| size_t kernel_frames; |
| int status; |
| int primary_pcm = 0; |
| |
| /* Find the first active PCM to act as primary */ |
| while ((primary_pcm < PCM_TOTAL) && !out->pcm[primary_pcm]) |
| primary_pcm++; |
| |
| status = pcm_get_htimestamp(out->pcm[primary_pcm], &kernel_frames, &buffer->time_stamp); |
| if (status < 0) { |
| buffer->time_stamp.tv_sec = 0; |
| buffer->time_stamp.tv_nsec = 0; |
| buffer->delay_ns = 0; |
| ALOGV("get_playback_delay(): pcm_get_htimestamp error," |
| "setting playbackTimestamp to 0"); |
| return status; |
| } |
| |
| kernel_frames = pcm_get_buffer_size(out->pcm[primary_pcm]) - kernel_frames; |
| |
| /* adjust render time stamp with delay added by current driver buffer. |
| * Add the duration of current frame as we want the render time of the last |
| * sample being written. */ |
| buffer->delay_ns = (long)(((int64_t)(kernel_frames + frames)* 1000000000)/ |
| MM_FULL_POWER_SAMPLING_RATE); |
| |
| return 0; |
| } |
| |
| static uint32_t out_get_sample_rate(const struct audio_stream *stream) |
| { |
| return DEFAULT_OUT_SAMPLING_RATE; |
| } |
| |
| static uint32_t out_get_sample_rate_hdmi(const struct audio_stream *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| return out->config[PCM_HDMI].rate; |
| } |
| |
| static int out_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| return 0; |
| } |
| |
| static size_t out_get_buffer_size_low_latency(const struct audio_stream *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| /* take resampling into account and return the closest majoring |
| multiple of 16 frames, as audioflinger expects audio buffers to |
| be a multiple of 16 frames. Note: we use the default rate here |
| from pcm_config_tones.rate. */ |
| size_t size = (SHORT_PERIOD_SIZE * DEFAULT_OUT_SAMPLING_RATE) / pcm_config_tones.rate; |
| size = ((size + 15) / 16) * 16; |
| return size * audio_stream_frame_size((struct audio_stream *)stream); |
| } |
| |
| static size_t out_get_buffer_size_deep_buffer(const struct audio_stream *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| /* take resampling into account and return the closest majoring |
| multiple of 16 frames, as audioflinger expects audio buffers to |
| be a multiple of 16 frames. Note: we use the default rate here |
| from pcm_config_mm.rate. */ |
| size_t size = (DEEP_BUFFER_SHORT_PERIOD_SIZE * DEFAULT_OUT_SAMPLING_RATE) / |
| pcm_config_mm.rate; |
| size = ((size + 15) / 16) * 16; |
| return size * audio_stream_frame_size((struct audio_stream *)stream); |
| } |
| |
| static size_t out_get_buffer_size_hdmi(const struct audio_stream *stream) |
| { |
| return HDMI_MULTI_PERIOD_SIZE * audio_stream_frame_size((struct audio_stream *)stream); |
| } |
| |
| static audio_channel_mask_t out_get_channels(const struct audio_stream *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| return out->channel_mask; |
| } |
| |
| static audio_format_t out_get_format(const struct audio_stream *stream) |
| { |
| return AUDIO_FORMAT_PCM_16_BIT; |
| } |
| |
| static int out_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| return 0; |
| } |
| |
| /* must be called with hw device and output stream mutexes locked */ |
| static int do_output_standby(struct tuna_stream_out *out) |
| { |
| struct tuna_audio_device *adev = out->dev; |
| int i; |
| bool all_outputs_in_standby = true; |
| |
| if (!out->standby) { |
| out->standby = 1; |
| |
| for (i = 0; i < PCM_TOTAL; i++) { |
| if (out->pcm[i]) { |
| pcm_close(out->pcm[i]); |
| out->pcm[i] = NULL; |
| } |
| } |
| |
| for (i = 0; i < OUTPUT_TOTAL; i++) { |
| if (adev->outputs[i] != NULL && !adev->outputs[i]->standby) { |
| all_outputs_in_standby = false; |
| break; |
| } |
| } |
| /* if in call, don't turn off the output stage. This will |
| be done when the call is ended */ |
| if (all_outputs_in_standby && adev->mode != AUDIO_MODE_IN_CALL) { |
| set_route_by_array(adev->mixer, hs_output, 0); |
| set_route_by_array(adev->mixer, hf_output, 0); |
| } |
| |
| /* force standby on low latency output stream so that it can reuse HDMI driver if |
| * necessary when restarted */ |
| if (out == adev->outputs[OUTPUT_HDMI]) { |
| if (adev->outputs[OUTPUT_LOW_LATENCY] != NULL && |
| !adev->outputs[OUTPUT_LOW_LATENCY]->standby) { |
| struct tuna_stream_out *ll_out = adev->outputs[OUTPUT_LOW_LATENCY]; |
| pthread_mutex_lock(&ll_out->lock); |
| do_output_standby(ll_out); |
| pthread_mutex_unlock(&ll_out->lock); |
| } |
| } |
| |
| /* stop writing to echo reference */ |
| if (out->echo_reference != NULL) { |
| out->echo_reference->write(out->echo_reference, NULL); |
| out->echo_reference = NULL; |
| } |
| } |
| return 0; |
| } |
| |
| static int out_standby(struct audio_stream *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| int status; |
| |
| pthread_mutex_lock(&out->dev->lock); |
| pthread_mutex_lock(&out->lock); |
| status = do_output_standby(out); |
| pthread_mutex_unlock(&out->lock); |
| pthread_mutex_unlock(&out->dev->lock); |
| return status; |
| } |
| |
| static int out_dump(const struct audio_stream *stream, int fd) |
| { |
| return 0; |
| } |
| |
| static int out_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| struct tuna_audio_device *adev = out->dev; |
| struct tuna_stream_in *in; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int ret, val = 0; |
| bool force_input_standby = false; |
| |
| parms = str_parms_create_str(kvpairs); |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value); |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&out->lock); |
| if ((adev->out_device != val) && (val != 0)) { |
| /* this is needed only when changing device on low latency output |
| * as other output streams are not used for voice use cases nor |
| * handle duplication to HDMI or SPDIF */ |
| if (out == adev->outputs[OUTPUT_LOW_LATENCY] && !out->standby) { |
| /* a change in output device may change the microphone selection */ |
| if (adev->active_input && |
| adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION) { |
| force_input_standby = true; |
| } |
| /* force standby if moving to/from HDMI/SPDIF or if the output |
| * device changes when in HDMI/SPDIF mode */ |
| /* FIXME also force standby when in call as some audio path switches do not work |
| * while in call and an output stream is active (e.g BT SCO => earpiece) */ |
| |
| /* FIXME workaround for audio being dropped when switching path without forcing standby |
| * (several hundred ms of audio can be lost: e.g beginning of a ringtone. We must understand |
| * the root cause in audio HAL, driver or ABE. |
| if (((val & AUDIO_DEVICE_OUT_AUX_DIGITAL) ^ |
| (adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || |
| ((val & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) ^ |
| (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || |
| (adev->out_device & (AUDIO_DEVICE_OUT_AUX_DIGITAL | |
| AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET))) |
| */ |
| if (((val & AUDIO_DEVICE_OUT_AUX_DIGITAL) ^ |
| (adev->out_device & AUDIO_DEVICE_OUT_AUX_DIGITAL)) || |
| ((val & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET) ^ |
| (adev->out_device & AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || |
| (adev->out_device & (AUDIO_DEVICE_OUT_AUX_DIGITAL | |
| AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET)) || |
| ((val & AUDIO_DEVICE_OUT_SPEAKER) ^ |
| (adev->out_device & AUDIO_DEVICE_OUT_SPEAKER)) || |
| (adev->mode == AUDIO_MODE_IN_CALL)) |
| do_output_standby(out); |
| } |
| if (out != adev->outputs[OUTPUT_HDMI]) { |
| adev->out_device = val; |
| select_output_device(adev); |
| } |
| } |
| pthread_mutex_unlock(&out->lock); |
| if (force_input_standby) { |
| in = adev->active_input; |
| pthread_mutex_lock(&in->lock); |
| do_input_standby(in); |
| pthread_mutex_unlock(&in->lock); |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| str_parms_destroy(parms); |
| return ret; |
| } |
| |
| static char * out_get_parameters(const struct audio_stream *stream, const char *keys) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| struct str_parms *query = str_parms_create_str(keys); |
| char *str; |
| char value[256]; |
| struct str_parms *reply = str_parms_create(); |
| size_t i, j; |
| int ret; |
| bool first = true; |
| |
| ret = str_parms_get_str(query, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value, sizeof(value)); |
| if (ret >= 0) { |
| value[0] = '\0'; |
| i = 0; |
| while (out->sup_channel_masks[i] != 0) { |
| for (j = 0; j < ARRAY_SIZE(out_channels_name_to_enum_table); j++) { |
| if (out_channels_name_to_enum_table[j].value == out->sup_channel_masks[i]) { |
| if (!first) { |
| strcat(value, "|"); |
| } |
| strcat(value, out_channels_name_to_enum_table[j].name); |
| first = false; |
| break; |
| } |
| } |
| i++; |
| } |
| str_parms_add_str(reply, AUDIO_PARAMETER_STREAM_SUP_CHANNELS, value); |
| str = str_parms_to_str(reply); |
| } else { |
| str = strdup(keys); |
| } |
| str_parms_destroy(query); |
| str_parms_destroy(reply); |
| return str; |
| } |
| |
| static uint32_t out_get_latency_low_latency(const struct audio_stream_out *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| /* Note: we use the default rate here from pcm_config_mm.rate */ |
| return (SHORT_PERIOD_SIZE * PLAYBACK_SHORT_PERIOD_COUNT * 1000) / pcm_config_tones.rate; |
| } |
| |
| static uint32_t out_get_latency_deep_buffer(const struct audio_stream_out *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| /* Note: we use the default rate here from pcm_config_mm.rate */ |
| return (DEEP_BUFFER_LONG_PERIOD_SIZE * PLAYBACK_DEEP_BUFFER_LONG_PERIOD_COUNT * 1000) / |
| pcm_config_mm.rate; |
| } |
| |
| static uint32_t out_get_latency_hdmi(const struct audio_stream_out *stream) |
| { |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| |
| return (HDMI_MULTI_PERIOD_SIZE * HDMI_MULTI_PERIOD_COUNT * 1000) / out->config[PCM_HDMI].rate; |
| } |
| |
| static int out_set_volume(struct audio_stream_out *stream, float left, |
| float right) |
| { |
| return -ENOSYS; |
| } |
| |
| static ssize_t out_write_low_latency(struct audio_stream_out *stream, const void* buffer, |
| size_t bytes) |
| { |
| int ret; |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| struct tuna_audio_device *adev = out->dev; |
| size_t frame_size = audio_stream_frame_size(&out->stream.common); |
| size_t in_frames = bytes / frame_size; |
| size_t out_frames = in_frames; |
| bool force_input_standby = false; |
| struct tuna_stream_in *in; |
| int i; |
| |
| /* acquiring hw device mutex systematically is useful if a low priority thread is waiting |
| * on the output stream mutex - e.g. executing select_mode() while holding the hw device |
| * mutex |
| */ |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&out->lock); |
| if (out->standby) { |
| ret = start_output_stream_low_latency(out); |
| if (ret != 0) { |
| pthread_mutex_unlock(&adev->lock); |
| goto exit; |
| } |
| out->standby = 0; |
| /* a change in output device may change the microphone selection */ |
| if (adev->active_input && |
| adev->active_input->source == AUDIO_SOURCE_VOICE_COMMUNICATION) |
| force_input_standby = true; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| for (i = 0; i < PCM_TOTAL; i++) { |
| /* only use resampler if required */ |
| if (out->pcm[i] && (out->config[i].rate != DEFAULT_OUT_SAMPLING_RATE)) { |
| out_frames = out->buffer_frames; |
| out->resampler->resample_from_input(out->resampler, |
| (int16_t *)buffer, |
| &in_frames, |
| (int16_t *)out->buffer, |
| &out_frames); |
| break; |
| } |
| } |
| |
| if (out->echo_reference != NULL) { |
| struct echo_reference_buffer b; |
| b.raw = (void *)buffer; |
| b.frame_count = in_frames; |
| |
| get_playback_delay(out, out_frames, &b); |
| out->echo_reference->write(out->echo_reference, &b); |
| } |
| |
| /* Write to all active PCMs */ |
| for (i = 0; i < PCM_TOTAL; i++) { |
| if (out->pcm[i]) { |
| if (out->config[i].rate == DEFAULT_OUT_SAMPLING_RATE) { |
| /* PCM uses native sample rate */ |
| ret = PCM_WRITE(out->pcm[i], (void *)buffer, bytes); |
| } else { |
| /* PCM needs resampler */ |
| ret = PCM_WRITE(out->pcm[i], (void *)out->buffer, out_frames * frame_size); |
| } |
| if (ret) |
| break; |
| } |
| } |
| |
| exit: |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| usleep(bytes * 1000000 / audio_stream_frame_size(&stream->common) / |
| out_get_sample_rate(&stream->common)); |
| } |
| |
| if (force_input_standby) { |
| pthread_mutex_lock(&adev->lock); |
| if (adev->active_input) { |
| in = adev->active_input; |
| pthread_mutex_lock(&in->lock); |
| do_input_standby(in); |
| pthread_mutex_unlock(&in->lock); |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| return bytes; |
| } |
| |
| static ssize_t out_write_deep_buffer(struct audio_stream_out *stream, const void* buffer, |
| size_t bytes) |
| { |
| int ret; |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| struct tuna_audio_device *adev = out->dev; |
| size_t frame_size = audio_stream_frame_size(&out->stream.common); |
| size_t in_frames = bytes / frame_size; |
| size_t out_frames; |
| bool use_long_periods; |
| int kernel_frames; |
| void *buf; |
| |
| /* acquiring hw device mutex systematically is useful if a low priority thread is waiting |
| * on the output stream mutex - e.g. executing select_mode() while holding the hw device |
| * mutex |
| */ |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&out->lock); |
| if (out->standby) { |
| ret = start_output_stream_deep_buffer(out); |
| if (ret != 0) { |
| pthread_mutex_unlock(&adev->lock); |
| goto exit; |
| } |
| out->standby = 0; |
| } |
| use_long_periods = adev->screen_off && !adev->active_input; |
| pthread_mutex_unlock(&adev->lock); |
| |
| if (use_long_periods != out->use_long_periods) { |
| size_t period_size; |
| size_t period_count; |
| |
| if (use_long_periods) { |
| period_size = DEEP_BUFFER_LONG_PERIOD_SIZE; |
| period_count = PLAYBACK_DEEP_BUFFER_LONG_PERIOD_COUNT; |
| } else { |
| period_size = DEEP_BUFFER_SHORT_PERIOD_SIZE; |
| period_count = PLAYBACK_DEEP_BUFFER_SHORT_PERIOD_COUNT; |
| } |
| out->write_threshold = period_size * period_count; |
| pcm_set_avail_min(out->pcm[PCM_NORMAL], period_size); |
| out->use_long_periods = use_long_periods; |
| } |
| |
| /* only use resampler if required */ |
| if (out->config[PCM_NORMAL].rate != DEFAULT_OUT_SAMPLING_RATE) { |
| out_frames = out->buffer_frames; |
| out->resampler->resample_from_input(out->resampler, |
| (int16_t *)buffer, |
| &in_frames, |
| (int16_t *)out->buffer, |
| &out_frames); |
| buf = (void *)out->buffer; |
| } else { |
| out_frames = in_frames; |
| buf = (void *)buffer; |
| } |
| |
| /* do not allow more than out->write_threshold frames in kernel pcm driver buffer */ |
| do { |
| struct timespec time_stamp; |
| |
| if (pcm_get_htimestamp(out->pcm[PCM_NORMAL], |
| (unsigned int *)&kernel_frames, &time_stamp) < 0) |
| break; |
| kernel_frames = pcm_get_buffer_size(out->pcm[PCM_NORMAL]) - kernel_frames; |
| |
| if (kernel_frames > out->write_threshold) { |
| unsigned long time = (unsigned long) |
| (((int64_t)(kernel_frames - out->write_threshold) * 1000000) / |
| MM_FULL_POWER_SAMPLING_RATE); |
| if (time < MIN_WRITE_SLEEP_US) |
| time = MIN_WRITE_SLEEP_US; |
| usleep(time); |
| } |
| } while (kernel_frames > out->write_threshold); |
| |
| ret = pcm_mmap_write(out->pcm[PCM_NORMAL], buf, out_frames * frame_size); |
| |
| exit: |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| usleep(bytes * 1000000 / audio_stream_frame_size(&stream->common) / |
| out_get_sample_rate(&stream->common)); |
| } |
| |
| return bytes; |
| } |
| |
| static ssize_t out_write_hdmi(struct audio_stream_out *stream, const void* buffer, |
| size_t bytes) |
| { |
| int ret; |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| struct tuna_audio_device *adev = out->dev; |
| size_t frame_size = audio_stream_frame_size(&out->stream.common); |
| size_t in_frames = bytes / frame_size; |
| |
| /* acquiring hw device mutex systematically is useful if a low priority thread is waiting |
| * on the output stream mutex - e.g. executing select_mode() while holding the hw device |
| * mutex |
| */ |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&out->lock); |
| if (out->standby) { |
| ret = start_output_stream_hdmi(out); |
| if (ret != 0) { |
| pthread_mutex_unlock(&adev->lock); |
| goto exit; |
| } |
| out->standby = 0; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| ret = pcm_write(out->pcm[PCM_HDMI], |
| buffer, |
| pcm_frames_to_bytes(out->pcm[PCM_HDMI], in_frames)); |
| |
| exit: |
| pthread_mutex_unlock(&out->lock); |
| |
| if (ret != 0) { |
| usleep(bytes * 1000000 / audio_stream_frame_size(&stream->common) / |
| out_get_sample_rate_hdmi(&stream->common)); |
| } |
| /* FIXME: workaround for HDMI multi channel channel swap on first playback after opening |
| * the output stream: force reopening the pcm driver after writing a few periods. */ |
| if ((out->restart_periods_cnt > 0) && |
| (--out->restart_periods_cnt == 0)) |
| out_standby(&stream->common); |
| |
| return bytes; |
| } |
| |
| static int out_get_render_position(const struct audio_stream_out *stream, |
| uint32_t *dsp_frames) |
| { |
| return -EINVAL; |
| } |
| |
| static int out_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| static int out_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect) |
| { |
| return 0; |
| } |
| |
| /** audio_stream_in implementation **/ |
| |
| /* must be called with hw device and input stream mutexes locked */ |
| static int start_input_stream(struct tuna_stream_in *in) |
| { |
| int ret = 0; |
| struct tuna_audio_device *adev = in->dev; |
| |
| adev->active_input = in; |
| |
| if (adev->mode != AUDIO_MODE_IN_CALL) { |
| adev->in_device = in->device; |
| select_input_device(adev); |
| } |
| |
| if (in->aux_channels_changed) |
| { |
| in->aux_channels_changed = false; |
| in->config.channels = popcount(in->main_channels | in->aux_channels); |
| |
| if (in->resampler) { |
| /* release and recreate the resampler with the new number of channel of the input */ |
| release_resampler(in->resampler); |
| in->resampler = NULL; |
| ret = create_resampler(in->config.rate, |
| in->requested_rate, |
| in->config.channels, |
| RESAMPLER_QUALITY_DEFAULT, |
| &in->buf_provider, |
| &in->resampler); |
| } |
| ALOGV("start_input_stream(): New channel configuration, " |
| "main_channels = [%04x], aux_channels = [%04x], config.channels = %d", |
| in->main_channels, in->aux_channels, in->config.channels); |
| } |
| |
| if (in->need_echo_reference && in->echo_reference == NULL) |
| in->echo_reference = get_echo_reference(adev, |
| AUDIO_FORMAT_PCM_16_BIT, |
| popcount(in->main_channels), |
| in->requested_rate); |
| |
| /* this assumes routing is done previously */ |
| in->pcm = pcm_open(0, PORT_MM2_UL, PCM_IN, &in->config); |
| if (!pcm_is_ready(in->pcm)) { |
| ALOGE("cannot open pcm_in driver: %s", pcm_get_error(in->pcm)); |
| pcm_close(in->pcm); |
| adev->active_input = NULL; |
| return -ENOMEM; |
| } |
| |
| /* force read and proc buf reallocation case of frame size or channel count change */ |
| in->read_buf_frames = 0; |
| in->read_buf_size = 0; |
| in->proc_buf_frames = 0; |
| in->proc_buf_size = 0; |
| /* if no supported sample rate is available, use the resampler */ |
| if (in->resampler) { |
| in->resampler->reset(in->resampler); |
| } |
| return 0; |
| } |
| |
| static uint32_t in_get_sample_rate(const struct audio_stream *stream) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| |
| return in->requested_rate; |
| } |
| |
| static int in_set_sample_rate(struct audio_stream *stream, uint32_t rate) |
| { |
| return 0; |
| } |
| |
| static size_t in_get_buffer_size(const struct audio_stream *stream) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| |
| return get_input_buffer_size(in->requested_rate, |
| AUDIO_FORMAT_PCM_16_BIT, |
| popcount(in->main_channels)); |
| } |
| |
| static audio_channel_mask_t in_get_channels(const struct audio_stream *stream) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| |
| return in->main_channels; |
| } |
| |
| static audio_format_t in_get_format(const struct audio_stream *stream) |
| { |
| return AUDIO_FORMAT_PCM_16_BIT; |
| } |
| |
| static int in_set_format(struct audio_stream *stream, audio_format_t format) |
| { |
| return 0; |
| } |
| |
| /* must be called with hw device and input stream mutexes locked */ |
| static int do_input_standby(struct tuna_stream_in *in) |
| { |
| struct tuna_audio_device *adev = in->dev; |
| |
| if (!in->standby) { |
| pcm_close(in->pcm); |
| in->pcm = NULL; |
| |
| adev->active_input = 0; |
| if (adev->mode != AUDIO_MODE_IN_CALL) { |
| adev->in_device = AUDIO_DEVICE_NONE; |
| select_input_device(adev); |
| } |
| |
| if (in->echo_reference != NULL) { |
| /* stop reading from echo reference */ |
| in->echo_reference->read(in->echo_reference, NULL); |
| put_echo_reference(adev, in->echo_reference); |
| in->echo_reference = NULL; |
| } |
| |
| in->standby = 1; |
| } |
| return 0; |
| } |
| |
| static int in_standby(struct audio_stream *stream) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| int status; |
| |
| pthread_mutex_lock(&in->dev->lock); |
| pthread_mutex_lock(&in->lock); |
| status = do_input_standby(in); |
| pthread_mutex_unlock(&in->lock); |
| pthread_mutex_unlock(&in->dev->lock); |
| return status; |
| } |
| |
| static int in_dump(const struct audio_stream *stream, int fd) |
| { |
| return 0; |
| } |
| |
| static int in_set_parameters(struct audio_stream *stream, const char *kvpairs) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| struct tuna_audio_device *adev = in->dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int ret, val = 0; |
| bool do_standby = false; |
| |
| parms = str_parms_create_str(kvpairs); |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_INPUT_SOURCE, value, sizeof(value)); |
| |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&in->lock); |
| if (ret >= 0) { |
| val = atoi(value); |
| /* no audio source uses val == 0 */ |
| if ((in->source != val) && (val != 0)) { |
| in->source = val; |
| do_standby = true; |
| } |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_STREAM_ROUTING, value, sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value) & ~AUDIO_DEVICE_BIT_IN; |
| if ((in->device != val) && (val != 0)) { |
| in->device = val; |
| do_standby = true; |
| /* make sure new device selection is incompatible with multi-mic pre processing |
| * configuration */ |
| in_update_aux_channels(in, NULL); |
| } |
| } |
| |
| if (do_standby) |
| do_input_standby(in); |
| pthread_mutex_unlock(&in->lock); |
| pthread_mutex_unlock(&adev->lock); |
| |
| str_parms_destroy(parms); |
| return ret; |
| } |
| |
| static char * in_get_parameters(const struct audio_stream *stream, |
| const char *keys) |
| { |
| return strdup(""); |
| } |
| |
| static int in_set_gain(struct audio_stream_in *stream, float gain) |
| { |
| return 0; |
| } |
| |
| static void get_capture_delay(struct tuna_stream_in *in, |
| size_t frames, |
| struct echo_reference_buffer *buffer) |
| { |
| |
| /* read frames available in kernel driver buffer */ |
| size_t kernel_frames; |
| struct timespec tstamp; |
| long buf_delay; |
| long rsmp_delay; |
| long kernel_delay; |
| long delay_ns; |
| |
| if (pcm_get_htimestamp(in->pcm, &kernel_frames, &tstamp) < 0) { |
| buffer->time_stamp.tv_sec = 0; |
| buffer->time_stamp.tv_nsec = 0; |
| buffer->delay_ns = 0; |
| ALOGW("read get_capture_delay(): pcm_htimestamp error"); |
| return; |
| } |
| |
| /* read frames available in audio HAL input buffer |
| * add number of frames being read as we want the capture time of first sample |
| * in current buffer */ |
| /* frames in in->buffer are at driver sampling rate while frames in in->proc_buf are |
| * at requested sampling rate */ |
| buf_delay = (long)(((int64_t)(in->read_buf_frames) * 1000000000) / in->config.rate + |
| ((int64_t)(in->proc_buf_frames) * 1000000000) / |
| in->requested_rate); |
| |
| /* add delay introduced by resampler */ |
| rsmp_delay = 0; |
| if (in->resampler) { |
| rsmp_delay = in->resampler->delay_ns(in->resampler); |
| } |
| |
| kernel_delay = (long)(((int64_t)kernel_frames * 1000000000) / in->config.rate); |
| |
| delay_ns = kernel_delay + buf_delay + rsmp_delay; |
| |
| buffer->time_stamp = tstamp; |
| buffer->delay_ns = delay_ns; |
| ALOGV("get_capture_delay time_stamp = [%ld].[%ld], delay_ns: [%d]," |
| " kernel_delay:[%ld], buf_delay:[%ld], rsmp_delay:[%ld], kernel_frames:[%d], " |
| "in->read_buf_frames:[%d], in->proc_buf_frames:[%d], frames:[%d]", |
| buffer->time_stamp.tv_sec , buffer->time_stamp.tv_nsec, buffer->delay_ns, |
| kernel_delay, buf_delay, rsmp_delay, kernel_frames, |
| in->read_buf_frames, in->proc_buf_frames, frames); |
| |
| } |
| |
| static int32_t update_echo_reference(struct tuna_stream_in *in, size_t frames) |
| { |
| struct echo_reference_buffer b; |
| b.delay_ns = 0; |
| |
| ALOGV("update_echo_reference, frames = [%d], in->ref_buf_frames = [%d], " |
| "b.frame_count = [%d]", |
| frames, in->ref_buf_frames, frames - in->ref_buf_frames); |
| if (in->ref_buf_frames < frames) { |
| if (in->ref_buf_size < frames) { |
| in->ref_buf_size = frames; |
| in->ref_buf = (int16_t *)realloc(in->ref_buf, pcm_frames_to_bytes(in->pcm, frames)); |
| ALOG_ASSERT((in->ref_buf != NULL), |
| "update_echo_reference() failed to reallocate ref_buf"); |
| ALOGV("update_echo_reference(): ref_buf %p extended to %d bytes", |
| in->ref_buf, pcm_frames_to_bytes(in->pcm, frames)); |
| } |
| b.frame_count = frames - in->ref_buf_frames; |
| b.raw = (void *)(in->ref_buf + in->ref_buf_frames * in->config.channels); |
| |
| get_capture_delay(in, frames, &b); |
| |
| if (in->echo_reference->read(in->echo_reference, &b) == 0) |
| { |
| in->ref_buf_frames += b.frame_count; |
| ALOGV("update_echo_reference(): in->ref_buf_frames:[%d], " |
| "in->ref_buf_size:[%d], frames:[%d], b.frame_count:[%d]", |
| in->ref_buf_frames, in->ref_buf_size, frames, b.frame_count); |
| } |
| } else |
| ALOGW("update_echo_reference(): NOT enough frames to read ref buffer"); |
| return b.delay_ns; |
| } |
| |
| static int set_preprocessor_param(effect_handle_t handle, |
| effect_param_t *param) |
| { |
| uint32_t size = sizeof(int); |
| uint32_t psize = ((param->psize - 1) / sizeof(int) + 1) * sizeof(int) + |
| param->vsize; |
| |
| int status = (*handle)->command(handle, |
| EFFECT_CMD_SET_PARAM, |
| sizeof (effect_param_t) + psize, |
| param, |
| &size, |
| ¶m->status); |
| if (status == 0) |
| status = param->status; |
| |
| return status; |
| } |
| |
| static int set_preprocessor_echo_delay(effect_handle_t handle, |
| int32_t delay_us) |
| { |
| uint32_t buf[sizeof(effect_param_t) / sizeof(uint32_t) + 2]; |
| effect_param_t *param = (effect_param_t *)buf; |
| |
| param->psize = sizeof(uint32_t); |
| param->vsize = sizeof(uint32_t); |
| *(uint32_t *)param->data = AEC_PARAM_ECHO_DELAY; |
| *((int32_t *)param->data + 1) = delay_us; |
| |
| return set_preprocessor_param(handle, param); |
| } |
| |
| static void push_echo_reference(struct tuna_stream_in *in, size_t frames) |
| { |
| /* read frames from echo reference buffer and update echo delay |
| * in->ref_buf_frames is updated with frames available in in->ref_buf */ |
| int32_t delay_us = update_echo_reference(in, frames)/1000; |
| int i; |
| audio_buffer_t buf; |
| |
| if (in->ref_buf_frames < frames) |
| frames = in->ref_buf_frames; |
| |
| buf.frameCount = frames; |
| buf.raw = in->ref_buf; |
| |
| for (i = 0; i < in->num_preprocessors; i++) { |
| if ((*in->preprocessors[i].effect_itfe)->process_reverse == NULL) |
| continue; |
| |
| (*in->preprocessors[i].effect_itfe)->process_reverse(in->preprocessors[i].effect_itfe, |
| &buf, |
| NULL); |
| set_preprocessor_echo_delay(in->preprocessors[i].effect_itfe, delay_us); |
| } |
| |
| in->ref_buf_frames -= buf.frameCount; |
| if (in->ref_buf_frames) { |
| memcpy(in->ref_buf, |
| in->ref_buf + buf.frameCount * in->config.channels, |
| in->ref_buf_frames * in->config.channels * sizeof(int16_t)); |
| } |
| } |
| |
| static int get_next_buffer(struct resampler_buffer_provider *buffer_provider, |
| struct resampler_buffer* buffer) |
| { |
| struct tuna_stream_in *in; |
| |
| if (buffer_provider == NULL || buffer == NULL) |
| return -EINVAL; |
| |
| in = (struct tuna_stream_in *)((char *)buffer_provider - |
| offsetof(struct tuna_stream_in, buf_provider)); |
| |
| if (in->pcm == NULL) { |
| buffer->raw = NULL; |
| buffer->frame_count = 0; |
| in->read_status = -ENODEV; |
| return -ENODEV; |
| } |
| |
| if (in->read_buf_frames == 0) { |
| size_t size_in_bytes = pcm_frames_to_bytes(in->pcm, in->config.period_size); |
| if (in->read_buf_size < in->config.period_size) { |
| in->read_buf_size = in->config.period_size; |
| in->read_buf = (int16_t *) realloc(in->read_buf, size_in_bytes); |
| ALOG_ASSERT((in->read_buf != NULL), |
| "get_next_buffer() failed to reallocate read_buf"); |
| ALOGV("get_next_buffer(): read_buf %p extended to %d bytes", |
| in->read_buf, size_in_bytes); |
| } |
| |
| in->read_status = pcm_read(in->pcm, (void*)in->read_buf, size_in_bytes); |
| |
| if (in->read_status != 0) { |
| ALOGE("get_next_buffer() pcm_read error %d", in->read_status); |
| buffer->raw = NULL; |
| buffer->frame_count = 0; |
| return in->read_status; |
| } |
| in->read_buf_frames = in->config.period_size; |
| } |
| |
| buffer->frame_count = (buffer->frame_count > in->read_buf_frames) ? |
| in->read_buf_frames : buffer->frame_count; |
| buffer->i16 = in->read_buf + (in->config.period_size - in->read_buf_frames) * |
| in->config.channels; |
| |
| return in->read_status; |
| |
| } |
| |
| static void release_buffer(struct resampler_buffer_provider *buffer_provider, |
| struct resampler_buffer* buffer) |
| { |
| struct tuna_stream_in *in; |
| |
| if (buffer_provider == NULL || buffer == NULL) |
| return; |
| |
| in = (struct tuna_stream_in *)((char *)buffer_provider - |
| offsetof(struct tuna_stream_in, buf_provider)); |
| |
| in->read_buf_frames -= buffer->frame_count; |
| } |
| |
| /* read_frames() reads frames from kernel driver, down samples to capture rate |
| * if necessary and output the number of frames requested to the buffer specified */ |
| static ssize_t read_frames(struct tuna_stream_in *in, void *buffer, ssize_t frames) |
| { |
| ssize_t frames_wr = 0; |
| |
| while (frames_wr < frames) { |
| size_t frames_rd = frames - frames_wr; |
| if (in->resampler != NULL) { |
| in->resampler->resample_from_provider(in->resampler, |
| (int16_t *)((char *)buffer + |
| pcm_frames_to_bytes(in->pcm ,frames_wr)), |
| &frames_rd); |
| |
| } else { |
| struct resampler_buffer buf = { |
| { raw : NULL, }, |
| frame_count : frames_rd, |
| }; |
| get_next_buffer(&in->buf_provider, &buf); |
| if (buf.raw != NULL) { |
| memcpy((char *)buffer + |
| pcm_frames_to_bytes(in->pcm, frames_wr), |
| buf.raw, |
| pcm_frames_to_bytes(in->pcm, buf.frame_count)); |
| frames_rd = buf.frame_count; |
| } |
| release_buffer(&in->buf_provider, &buf); |
| } |
| /* in->read_status is updated by getNextBuffer() also called by |
| * in->resampler->resample_from_provider() */ |
| if (in->read_status != 0) |
| return in->read_status; |
| |
| frames_wr += frames_rd; |
| } |
| return frames_wr; |
| } |
| |
| /* process_frames() reads frames from kernel driver (via read_frames()), |
| * calls the active audio pre processings and output the number of frames requested |
| * to the buffer specified */ |
| static ssize_t process_frames(struct tuna_stream_in *in, void* buffer, ssize_t frames) |
| { |
| ssize_t frames_wr = 0; |
| audio_buffer_t in_buf; |
| audio_buffer_t out_buf; |
| int i; |
| bool has_aux_channels = (~in->main_channels & in->aux_channels); |
| void *proc_buf_out; |
| |
| if (has_aux_channels) |
| proc_buf_out = in->proc_buf_out; |
| else |
| proc_buf_out = buffer; |
| |
| /* since all the processing below is done in frames and using the config.channels |
| * as the number of channels, no changes is required in case aux_channels are present */ |
| while (frames_wr < frames) { |
| /* first reload enough frames at the end of process input buffer */ |
| if (in->proc_buf_frames < (size_t)frames) { |
| ssize_t frames_rd; |
| |
| if (in->proc_buf_size < (size_t)frames) { |
| size_t size_in_bytes = pcm_frames_to_bytes(in->pcm, frames); |
| |
| in->proc_buf_size = (size_t)frames; |
| in->proc_buf_in = (int16_t *)realloc(in->proc_buf_in, size_in_bytes); |
| ALOG_ASSERT((in->proc_buf_in != NULL), |
| "process_frames() failed to reallocate proc_buf_in"); |
| if (has_aux_channels) { |
| in->proc_buf_out = (int16_t *)realloc(in->proc_buf_out, size_in_bytes); |
| ALOG_ASSERT((in->proc_buf_out != NULL), |
| "process_frames() failed to reallocate proc_buf_out"); |
| proc_buf_out = in->proc_buf_out; |
| } |
| ALOGV("process_frames(): proc_buf_in %p extended to %d bytes", |
| in->proc_buf_in, size_in_bytes); |
| } |
| frames_rd = read_frames(in, |
| in->proc_buf_in + |
| in->proc_buf_frames * in->config.channels, |
| frames - in->proc_buf_frames); |
| if (frames_rd < 0) { |
| frames_wr = frames_rd; |
| break; |
| } |
| in->proc_buf_frames += frames_rd; |
| } |
| |
| if (in->echo_reference != NULL) |
| push_echo_reference(in, in->proc_buf_frames); |
| |
| /* in_buf.frameCount and out_buf.frameCount indicate respectively |
| * the maximum number of frames to be consumed and produced by process() */ |
| in_buf.frameCount = in->proc_buf_frames; |
| in_buf.s16 = in->proc_buf_in; |
| out_buf.frameCount = frames - frames_wr; |
| out_buf.s16 = (int16_t *)proc_buf_out + frames_wr * in->config.channels; |
| |
| /* FIXME: this works because of current pre processing library implementation that |
| * does the actual process only when the last enabled effect process is called. |
| * The generic solution is to have an output buffer for each effect and pass it as |
| * input to the next. |
| */ |
| for (i = 0; i < in->num_preprocessors; i++) { |
| (*in->preprocessors[i].effect_itfe)->process(in->preprocessors[i].effect_itfe, |
| &in_buf, |
| &out_buf); |
| } |
| |
| /* process() has updated the number of frames consumed and produced in |
| * in_buf.frameCount and out_buf.frameCount respectively |
| * move remaining frames to the beginning of in->proc_buf_in */ |
| in->proc_buf_frames -= in_buf.frameCount; |
| |
| if (in->proc_buf_frames) { |
| memcpy(in->proc_buf_in, |
| in->proc_buf_in + in_buf.frameCount * in->config.channels, |
| in->proc_buf_frames * in->config.channels * sizeof(int16_t)); |
| } |
| |
| /* if not enough frames were passed to process(), read more and retry. */ |
| if (out_buf.frameCount == 0) { |
| ALOGW("No frames produced by preproc"); |
| continue; |
| } |
| |
| if ((frames_wr + (ssize_t)out_buf.frameCount) <= frames) { |
| frames_wr += out_buf.frameCount; |
| } else { |
| /* The effect does not comply to the API. In theory, we should never end up here! */ |
| ALOGE("preprocessing produced too many frames: %d + %d > %d !", |
| (unsigned int)frames_wr, out_buf.frameCount, (unsigned int)frames); |
| frames_wr = frames; |
| } |
| } |
| |
| /* Remove aux_channels that have been added on top of main_channels |
| * Assumption is made that the channels are interleaved and that the main |
| * channels are first. */ |
| if (has_aux_channels) |
| { |
| size_t src_channels = in->config.channels; |
| size_t dst_channels = popcount(in->main_channels); |
| int16_t* src_buffer = (int16_t *)proc_buf_out; |
| int16_t* dst_buffer = (int16_t *)buffer; |
| |
| if (dst_channels == 1) { |
| for (i = frames_wr; i > 0; i--) |
| { |
| *dst_buffer++ = *src_buffer; |
| src_buffer += src_channels; |
| } |
| } else { |
| for (i = frames_wr; i > 0; i--) |
| { |
| memcpy(dst_buffer, src_buffer, dst_channels*sizeof(int16_t)); |
| dst_buffer += dst_channels; |
| src_buffer += src_channels; |
| } |
| } |
| } |
| |
| return frames_wr; |
| } |
| |
| static ssize_t in_read(struct audio_stream_in *stream, void* buffer, |
| |
| size_t bytes) |
| { |
| int ret = 0; |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| struct tuna_audio_device *adev = in->dev; |
| size_t frames_rq = bytes / audio_stream_frame_size(&stream->common); |
| |
| /* acquiring hw device mutex systematically is useful if a low priority thread is waiting |
| * on the input stream mutex - e.g. executing select_mode() while holding the hw device |
| * mutex |
| */ |
| pthread_mutex_lock(&adev->lock); |
| pthread_mutex_lock(&in->lock); |
| if (in->standby) { |
| ret = start_input_stream(in); |
| if (ret == 0) |
| in->standby = 0; |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| if (ret < 0) |
| goto exit; |
| |
| if (in->num_preprocessors != 0) |
| ret = process_frames(in, buffer, frames_rq); |
| else if (in->resampler != NULL) |
| ret = read_frames(in, buffer, frames_rq); |
| else |
| ret = pcm_read(in->pcm, buffer, bytes); |
| |
| if (ret > 0) |
| ret = 0; |
| |
| if (ret == 0 && adev->mic_mute) |
| memset(buffer, 0, bytes); |
| |
| exit: |
| if (ret < 0) |
| usleep(bytes * 1000000 / audio_stream_frame_size(&stream->common) / |
| in_get_sample_rate(&stream->common)); |
| |
| pthread_mutex_unlock(&in->lock); |
| return bytes; |
| } |
| |
| static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream) |
| { |
| return 0; |
| } |
| |
| #define GET_COMMAND_STATUS(status, fct_status, cmd_status) \ |
| do { \ |
| if (fct_status != 0) \ |
| status = fct_status; \ |
| else if (cmd_status != 0) \ |
| status = cmd_status; \ |
| } while(0) |
| |
| static int in_configure_reverse(struct tuna_stream_in *in) |
| { |
| int32_t cmd_status; |
| uint32_t size = sizeof(int); |
| effect_config_t config; |
| int32_t status = 0; |
| int32_t fct_status = 0; |
| int i; |
| |
| if (in->num_preprocessors > 0) { |
| config.inputCfg.channels = in->main_channels; |
| config.outputCfg.channels = in->main_channels; |
| config.inputCfg.format = AUDIO_FORMAT_PCM_16_BIT; |
| config.outputCfg.format = AUDIO_FORMAT_PCM_16_BIT; |
| config.inputCfg.samplingRate = in->requested_rate; |
| config.outputCfg.samplingRate = in->requested_rate; |
| config.inputCfg.mask = |
| ( EFFECT_CONFIG_SMP_RATE | EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT ); |
| config.outputCfg.mask = |
| ( EFFECT_CONFIG_SMP_RATE | EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT ); |
| |
| for (i = 0; i < in->num_preprocessors; i++) |
| { |
| if ((*in->preprocessors[i].effect_itfe)->process_reverse == NULL) |
| continue; |
| fct_status = (*(in->preprocessors[i].effect_itfe))->command( |
| in->preprocessors[i].effect_itfe, |
| EFFECT_CMD_SET_CONFIG_REVERSE, |
| sizeof(effect_config_t), |
| &config, |
| &size, |
| &cmd_status); |
| GET_COMMAND_STATUS(status, fct_status, cmd_status); |
| } |
| } |
| return status; |
| } |
| |
| #define MAX_NUM_CHANNEL_CONFIGS 10 |
| |
| static void in_read_audio_effect_channel_configs(struct tuna_stream_in *in, |
| struct effect_info_s *effect_info) |
| { |
| /* size and format of the cmd are defined in hardware/audio_effect.h */ |
| effect_handle_t effect = effect_info->effect_itfe; |
| uint32_t cmd_size = 2 * sizeof(uint32_t); |
| uint32_t cmd[] = { EFFECT_FEATURE_AUX_CHANNELS, MAX_NUM_CHANNEL_CONFIGS }; |
| /* reply = status + number of configs (n) + n x channel_config_t */ |
| uint32_t reply_size = |
| 2 * sizeof(uint32_t) + (MAX_NUM_CHANNEL_CONFIGS * sizeof(channel_config_t)); |
| int32_t reply[reply_size]; |
| int32_t cmd_status; |
| |
| ALOG_ASSERT((effect_info->num_channel_configs == 0), |
| "in_read_audio_effect_channel_configs() num_channel_configs not cleared"); |
| ALOG_ASSERT((effect_info->channel_configs == NULL), |
| "in_read_audio_effect_channel_configs() channel_configs not cleared"); |
| |
| /* if this command is not supported, then the effect is supposed to return -EINVAL. |
| * This error will be interpreted as if the effect supports the main_channels but does not |
| * support any aux_channels */ |
| cmd_status = (*effect)->command(effect, |
| EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS, |
| cmd_size, |
| (void*)&cmd, |
| &reply_size, |
| (void*)&reply); |
| |
| if (cmd_status != 0) { |
| ALOGV("in_read_audio_effect_channel_configs(): " |
| "fx->command returned %d", cmd_status); |
| return; |
| } |
| |
| if (reply[0] != 0) { |
| ALOGW("in_read_audio_effect_channel_configs(): " |
| "command EFFECT_CMD_GET_FEATURE_SUPPORTED_CONFIGS error %d num configs %d", |
| reply[0], (reply[0] == -ENOMEM) ? reply[1] : MAX_NUM_CHANNEL_CONFIGS); |
| return; |
| } |
| |
| /* the feature is not supported */ |
| ALOGV("in_read_audio_effect_channel_configs()(): " |
| "Feature supported and adding %d channel configs to the list", reply[1]); |
| effect_info->num_channel_configs = reply[1]; |
| effect_info->channel_configs = |
| (channel_config_t *) malloc(sizeof(channel_config_t) * reply[1]); /* n x configs */ |
| memcpy(effect_info->channel_configs, (reply + 2), sizeof(channel_config_t) * reply[1]); |
| } |
| |
| |
| static uint32_t in_get_aux_channels(struct tuna_stream_in *in) |
| { |
| int i; |
| channel_config_t new_chcfg = {0, 0}; |
| |
| if (in->num_preprocessors == 0) |
| return 0; |
| |
| /* do not enable dual mic configurations when capturing from other microphones than |
| * main or sub */ |
| if (!(in->device & (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC))) |
| return 0; |
| |
| /* retain most complex aux channels configuration compatible with requested main channels and |
| * supported by audio driver and all pre processors */ |
| for (i = 0; i < NUM_IN_AUX_CNL_CONFIGS; i++) { |
| channel_config_t *cur_chcfg = &in_aux_cnl_configs[i]; |
| if (cur_chcfg->main_channels == in->main_channels) { |
| size_t match_cnt; |
| size_t idx_preproc; |
| for (idx_preproc = 0, match_cnt = 0; |
| /* no need to continue if at least one preprocessor doesn't match */ |
| idx_preproc < (size_t)in->num_preprocessors && match_cnt == idx_preproc; |
| idx_preproc++) { |
| struct effect_info_s *effect_info = &in->preprocessors[idx_preproc]; |
| size_t idx_chcfg; |
| |
| for (idx_chcfg = 0; idx_chcfg < effect_info->num_channel_configs; idx_chcfg++) { |
| if (memcmp(effect_info->channel_configs + idx_chcfg, |
| cur_chcfg, |
| sizeof(channel_config_t)) == 0) { |
| match_cnt++; |
| break; |
| } |
| } |
| } |
| /* if all preprocessors match, we have a candidate */ |
| if (match_cnt == (size_t)in->num_preprocessors) { |
| /* retain most complex aux channels configuration */ |
| if (popcount(cur_chcfg->aux_channels) > popcount(new_chcfg.aux_channels)) { |
| new_chcfg = *cur_chcfg; |
| } |
| } |
| } |
| } |
| |
| ALOGV("in_get_aux_channels(): return %04x", new_chcfg.aux_channels); |
| |
| return new_chcfg.aux_channels; |
| } |
| |
| static int in_configure_effect_channels(effect_handle_t effect, |
| channel_config_t *channel_config) |
| { |
| int status = 0; |
| int fct_status; |
| int32_t cmd_status; |
| uint32_t reply_size; |
| effect_config_t config; |
| uint32_t cmd[(sizeof(uint32_t) + sizeof(channel_config_t) - 1) / sizeof(uint32_t) + 1]; |
| |
| ALOGV("in_configure_effect_channels(): configure effect with channels: [%04x][%04x]", |
| channel_config->main_channels, |
| channel_config->aux_channels); |
| |
| config.inputCfg.mask = EFFECT_CONFIG_CHANNELS; |
| config.outputCfg.mask = EFFECT_CONFIG_CHANNELS; |
| reply_size = sizeof(effect_config_t); |
| fct_status = (*effect)->command(effect, |
| EFFECT_CMD_GET_CONFIG, |
| 0, |
| NULL, |
| &reply_size, |
| &config); |
| if (fct_status != 0) { |
| ALOGE("in_configure_effect_channels(): EFFECT_CMD_GET_CONFIG failed"); |
| return fct_status; |
| } |
| |
| config.inputCfg.channels = channel_config->main_channels | channel_config->aux_channels; |
| config.outputCfg.channels = config.inputCfg.channels; |
| reply_size = sizeof(uint32_t); |
| fct_status = (*effect)->command(effect, |
| EFFECT_CMD_SET_CONFIG, |
| sizeof(effect_config_t), |
| &config, |
| &reply_size, |
| &cmd_status); |
| GET_COMMAND_STATUS(status, fct_status, cmd_status); |
| |
| cmd[0] = EFFECT_FEATURE_AUX_CHANNELS; |
| memcpy(cmd + 1, channel_config, sizeof(channel_config_t)); |
| reply_size = sizeof(uint32_t); |
| fct_status = (*effect)->command(effect, |
| EFFECT_CMD_SET_FEATURE_CONFIG, |
| sizeof(cmd), //sizeof(uint32_t) + sizeof(channel_config_t), |
| cmd, |
| &reply_size, |
| &cmd_status); |
| GET_COMMAND_STATUS(status, fct_status, cmd_status); |
| |
| /* some implementations need to be re-enabled after a config change */ |
| reply_size = sizeof(uint32_t); |
| fct_status = (*effect)->command(effect, |
| EFFECT_CMD_ENABLE, |
| 0, |
| NULL, |
| &reply_size, |
| &cmd_status); |
| GET_COMMAND_STATUS(status, fct_status, cmd_status); |
| |
| return status; |
| } |
| |
| static int in_reconfigure_channels(struct tuna_stream_in *in, |
| effect_handle_t effect, |
| channel_config_t *channel_config, |
| bool config_changed) { |
| |
| int status = 0; |
| |
| ALOGV("in_reconfigure_channels(): config_changed %d effect %p", |
| config_changed, effect); |
| |
| /* if config changed, reconfigure all previously added effects */ |
| if (config_changed) { |
| int i; |
| for (i = 0; i < in->num_preprocessors; i++) |
| { |
| int cur_status = in_configure_effect_channels(in->preprocessors[i].effect_itfe, |
| channel_config); |
| if (cur_status != 0) { |
| ALOGV("in_reconfigure_channels(): error %d configuring effect " |
| "%d with channels: [%04x][%04x]", |
| cur_status, |
| i, |
| channel_config->main_channels, |
| channel_config->aux_channels); |
| status = cur_status; |
| } |
| } |
| } else if (effect != NULL && channel_config->aux_channels) { |
| /* if aux channels config did not change but aux channels are present, |
| * we still need to configure the effect being added */ |
| status = in_configure_effect_channels(effect, channel_config); |
| } |
| return status; |
| } |
| |
| static void in_update_aux_channels(struct tuna_stream_in *in, |
| effect_handle_t effect) |
| { |
| uint32_t aux_channels; |
| channel_config_t channel_config; |
| int status; |
| |
| aux_channels = in_get_aux_channels(in); |
| |
| channel_config.main_channels = in->main_channels; |
| channel_config.aux_channels = aux_channels; |
| status = in_reconfigure_channels(in, |
| effect, |
| &channel_config, |
| (aux_channels != in->aux_channels)); |
| |
| if (status != 0) { |
| ALOGV("in_update_aux_channels(): in_reconfigure_channels error %d", status); |
| /* resetting aux channels configuration */ |
| aux_channels = 0; |
| channel_config.aux_channels = 0; |
| in_reconfigure_channels(in, effect, &channel_config, true); |
| } |
| if (in->aux_channels != aux_channels) { |
| in->aux_channels_changed = true; |
| in->aux_channels = aux_channels; |
| do_input_standby(in); |
| } |
| } |
| |
| static int in_add_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| int status; |
| effect_descriptor_t desc; |
| |
| pthread_mutex_lock(&in->dev->lock); |
| pthread_mutex_lock(&in->lock); |
| if (in->num_preprocessors >= MAX_PREPROCESSORS) { |
| status = -ENOSYS; |
| goto exit; |
| } |
| |
| status = (*effect)->get_descriptor(effect, &desc); |
| if (status != 0) |
| goto exit; |
| |
| in->preprocessors[in->num_preprocessors].effect_itfe = effect; |
| /* add the supported channel of the effect in the channel_configs */ |
| in_read_audio_effect_channel_configs(in, &in->preprocessors[in->num_preprocessors]); |
| |
| in->num_preprocessors++; |
| |
| /* check compatibility between main channel supported and possible auxiliary channels */ |
| in_update_aux_channels(in, effect); |
| |
| ALOGV("in_add_audio_effect(), effect type: %08x", desc.type.timeLow); |
| |
| if (memcmp(&desc.type, FX_IID_AEC, sizeof(effect_uuid_t)) == 0) { |
| in->need_echo_reference = true; |
| do_input_standby(in); |
| in_configure_reverse(in); |
| } |
| |
| exit: |
| |
| ALOGW_IF(status != 0, "in_add_audio_effect() error %d", status); |
| pthread_mutex_unlock(&in->lock); |
| pthread_mutex_unlock(&in->dev->lock); |
| return status; |
| } |
| |
| static int in_remove_audio_effect(const struct audio_stream *stream, |
| effect_handle_t effect) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| int i; |
| int status = -EINVAL; |
| effect_descriptor_t desc; |
| |
| pthread_mutex_lock(&in->dev->lock); |
| pthread_mutex_lock(&in->lock); |
| if (in->num_preprocessors <= 0) { |
| status = -ENOSYS; |
| goto exit; |
| } |
| |
| for (i = 0; i < in->num_preprocessors; i++) { |
| if (status == 0) { /* status == 0 means an effect was removed from a previous slot */ |
| in->preprocessors[i - 1].effect_itfe = in->preprocessors[i].effect_itfe; |
| in->preprocessors[i - 1].channel_configs = in->preprocessors[i].channel_configs; |
| in->preprocessors[i - 1].num_channel_configs = in->preprocessors[i].num_channel_configs; |
| ALOGV("in_remove_audio_effect moving fx from %d to %d", i, i - 1); |
| continue; |
| } |
| if (in->preprocessors[i].effect_itfe == effect) { |
| ALOGV("in_remove_audio_effect found fx at index %d", i); |
| free(in->preprocessors[i].channel_configs); |
| status = 0; |
| } |
| } |
| |
| if (status != 0) |
| goto exit; |
| |
| in->num_preprocessors--; |
| /* if we remove one effect, at least the last preproc should be reset */ |
| in->preprocessors[in->num_preprocessors].num_channel_configs = 0; |
| in->preprocessors[in->num_preprocessors].effect_itfe = NULL; |
| in->preprocessors[in->num_preprocessors].channel_configs = NULL; |
| |
| |
| /* check compatibility between main channel supported and possible auxiliary channels */ |
| in_update_aux_channels(in, NULL); |
| |
| status = (*effect)->get_descriptor(effect, &desc); |
| if (status != 0) |
| goto exit; |
| |
| ALOGV("in_remove_audio_effect(), effect type: %08x", desc.type.timeLow); |
| |
| if (memcmp(&desc.type, FX_IID_AEC, sizeof(effect_uuid_t)) == 0) { |
| in->need_echo_reference = false; |
| do_input_standby(in); |
| } |
| |
| exit: |
| |
| ALOGW_IF(status != 0, "in_remove_audio_effect() error %d", status); |
| pthread_mutex_unlock(&in->lock); |
| pthread_mutex_unlock(&in->dev->lock); |
| return status; |
| } |
| |
| static int out_read_hdmi_channel_masks(struct tuna_stream_out *out) { |
| int max_channels = 0; |
| struct mixer *mixer_hdmi; |
| |
| mixer_hdmi = mixer_open(CARD_OMAP4_HDMI); |
| if (mixer_hdmi) { |
| struct mixer_ctl *ctl; |
| |
| ctl = mixer_get_ctl_by_name(mixer_hdmi, MIXER_MAXIMUM_LPCM_CHANNELS); |
| if (ctl) |
| max_channels = mixer_ctl_get_value(ctl, 0); |
| mixer_close(mixer_hdmi); |
| } |
| |
| ALOGV("out_read_hdmi_channel_masks() got %d max channels", max_channels); |
| |
| if (max_channels != 6 && max_channels != 8) |
| return -ENOSYS; |
| |
| out->sup_channel_masks[0] = AUDIO_CHANNEL_OUT_5POINT1; |
| if (max_channels == 8) |
| out->sup_channel_masks[1] = AUDIO_CHANNEL_OUT_7POINT1; |
| |
| return 0; |
| } |
| |
| static int adev_open_output_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| audio_output_flags_t flags, |
| struct audio_config *config, |
| struct audio_stream_out **stream_out) |
| { |
| struct tuna_audio_device *ladev = (struct tuna_audio_device *)dev; |
| struct tuna_stream_out *out; |
| int ret; |
| int output_type; |
| |
| *stream_out = NULL; |
| |
| out = (struct tuna_stream_out *)calloc(1, sizeof(struct tuna_stream_out)); |
| if (!out) |
| return -ENOMEM; |
| |
| out->sup_channel_masks[0] = AUDIO_CHANNEL_OUT_STEREO; |
| out->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| |
| if (flags & AUDIO_OUTPUT_FLAG_DIRECT && |
| devices == AUDIO_DEVICE_OUT_AUX_DIGITAL) { |
| ALOGV("adev_open_output_stream() HDMI multichannel"); |
| if (ladev->outputs[OUTPUT_HDMI] != NULL) { |
| ret = -ENOSYS; |
| goto err_open; |
| } |
| ret = out_read_hdmi_channel_masks(out); |
| if (ret != 0) |
| goto err_open; |
| output_type = OUTPUT_HDMI; |
| if (config->sample_rate == 0) |
| config->sample_rate = MM_FULL_POWER_SAMPLING_RATE; |
| if (config->channel_mask == 0) |
| config->channel_mask = AUDIO_CHANNEL_OUT_5POINT1; |
| out->channel_mask = config->channel_mask; |
| out->stream.common.get_buffer_size = out_get_buffer_size_hdmi; |
| out->stream.common.get_sample_rate = out_get_sample_rate_hdmi; |
| out->stream.get_latency = out_get_latency_hdmi; |
| out->stream.write = out_write_hdmi; |
| out->config[PCM_HDMI] = pcm_config_hdmi_multi; |
| out->config[PCM_HDMI].rate = config->sample_rate; |
| out->config[PCM_HDMI].channels = popcount(config->channel_mask); |
| /* FIXME: workaround for channel swap on first playback after opening the output */ |
| out->restart_periods_cnt = out->config[PCM_HDMI].period_count * 2; |
| } else if (flags & AUDIO_OUTPUT_FLAG_DEEP_BUFFER) { |
| ALOGV("adev_open_output_stream() deep buffer"); |
| if (ladev->outputs[OUTPUT_DEEP_BUF] != NULL) { |
| ret = -ENOSYS; |
| goto err_open; |
| } |
| output_type = OUTPUT_DEEP_BUF; |
| out->channel_mask = AUDIO_CHANNEL_OUT_STEREO; |
| out->stream.common.get_buffer_size = out_get_buffer_size_deep_buffer; |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.get_latency = out_get_latency_deep_buffer; |
| out->stream.write = out_write_deep_buffer; |
| } else { |
| ALOGV("adev_open_output_stream() normal buffer"); |
| if (ladev->outputs[OUTPUT_LOW_LATENCY] != NULL) { |
| ret = -ENOSYS; |
| goto err_open; |
| } |
| output_type = OUTPUT_LOW_LATENCY; |
| out->stream.common.get_buffer_size = out_get_buffer_size_low_latency; |
| out->stream.common.get_sample_rate = out_get_sample_rate; |
| out->stream.get_latency = out_get_latency_low_latency; |
| out->stream.write = out_write_low_latency; |
| } |
| |
| ret = create_resampler(DEFAULT_OUT_SAMPLING_RATE, |
| MM_FULL_POWER_SAMPLING_RATE, |
| 2, |
| RESAMPLER_QUALITY_DEFAULT, |
| NULL, |
| &out->resampler); |
| if (ret != 0) |
| goto err_open; |
| |
| out->stream.common.set_sample_rate = out_set_sample_rate; |
| out->stream.common.get_channels = out_get_channels; |
| out->stream.common.get_format = out_get_format; |
| out->stream.common.set_format = out_set_format; |
| out->stream.common.standby = out_standby; |
| out->stream.common.dump = out_dump; |
| out->stream.common.set_parameters = out_set_parameters; |
| out->stream.common.get_parameters = out_get_parameters; |
| out->stream.common.add_audio_effect = out_add_audio_effect; |
| out->stream.common.remove_audio_effect = out_remove_audio_effect; |
| out->stream.set_volume = out_set_volume; |
| out->stream.get_render_position = out_get_render_position; |
| |
| out->dev = ladev; |
| out->standby = 1; |
| |
| /* FIXME: when we support multiple output devices, we will want to |
| * do the following: |
| * adev->out_device = out->device; |
| * select_output_device(adev); |
| * This is because out_set_parameters() with a route is not |
| * guaranteed to be called after an output stream is opened. */ |
| |
| config->format = out->stream.common.get_format(&out->stream.common); |
| config->channel_mask = out->stream.common.get_channels(&out->stream.common); |
| config->sample_rate = out->stream.common.get_sample_rate(&out->stream.common); |
| |
| *stream_out = &out->stream; |
| ladev->outputs[output_type] = out; |
| |
| return 0; |
| |
| err_open: |
| free(out); |
| return ret; |
| } |
| |
| static void adev_close_output_stream(struct audio_hw_device *dev, |
| struct audio_stream_out *stream) |
| { |
| struct tuna_audio_device *ladev = (struct tuna_audio_device *)dev; |
| struct tuna_stream_out *out = (struct tuna_stream_out *)stream; |
| int i; |
| |
| out_standby(&stream->common); |
| for (i = 0; i < OUTPUT_TOTAL; i++) { |
| if (ladev->outputs[i] == out) { |
| ladev->outputs[i] = NULL; |
| break; |
| } |
| } |
| |
| if (out->buffer) |
| free(out->buffer); |
| if (out->resampler) |
| release_resampler(out->resampler); |
| free(stream); |
| } |
| |
| static int adev_set_parameters(struct audio_hw_device *dev, const char *kvpairs) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; |
| struct str_parms *parms; |
| char *str; |
| char value[32]; |
| int ret; |
| |
| parms = str_parms_create_str(kvpairs); |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_TTY_MODE, value, sizeof(value)); |
| if (ret >= 0) { |
| int tty_mode; |
| |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_TTY_OFF) == 0) |
| tty_mode = TTY_MODE_OFF; |
| else if (strcmp(value, AUDIO_PARAMETER_VALUE_TTY_VCO) == 0) |
| tty_mode = TTY_MODE_VCO; |
| else if (strcmp(value, AUDIO_PARAMETER_VALUE_TTY_HCO) == 0) |
| tty_mode = TTY_MODE_HCO; |
| else if (strcmp(value, AUDIO_PARAMETER_VALUE_TTY_FULL) == 0) |
| tty_mode = TTY_MODE_FULL; |
| else |
| return -EINVAL; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (tty_mode != adev->tty_mode) { |
| adev->tty_mode = tty_mode; |
| if (adev->mode == AUDIO_MODE_IN_CALL) |
| select_output_device(adev); |
| } |
| pthread_mutex_unlock(&adev->lock); |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_KEY_BT_NREC, value, sizeof(value)); |
| if (ret >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->bluetooth_nrec = true; |
| else |
| adev->bluetooth_nrec = false; |
| } |
| |
| ret = str_parms_get_str(parms, "screen_state", value, sizeof(value)); |
| if (ret >= 0) { |
| if (strcmp(value, AUDIO_PARAMETER_VALUE_ON) == 0) |
| adev->screen_off = false; |
| else |
| adev->screen_off = true; |
| } |
| |
| str_parms_destroy(parms); |
| return ret; |
| } |
| |
| static char * adev_get_parameters(const struct audio_hw_device *dev, |
| const char *keys) |
| { |
| return strdup(""); |
| } |
| |
| static int adev_init_check(const struct audio_hw_device *dev) |
| { |
| return 0; |
| } |
| |
| static int adev_set_voice_volume(struct audio_hw_device *dev, float volume) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; |
| |
| pthread_mutex_lock(&adev->lock); |
| adev->voice_volume = volume; |
| |
| if (adev->mode == AUDIO_MODE_IN_CALL) |
| ril_set_call_volume(&adev->ril, SOUND_TYPE_VOICE, volume); |
| |
| pthread_mutex_unlock(&adev->lock); |
| return 0; |
| } |
| |
| static int adev_set_master_volume(struct audio_hw_device *dev, float volume) |
| { |
| return -ENOSYS; |
| } |
| |
| static int adev_set_mode(struct audio_hw_device *dev, audio_mode_t mode) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; |
| |
| pthread_mutex_lock(&adev->lock); |
| if (adev->mode != mode) { |
| adev->mode = mode; |
| select_mode(adev); |
| } |
| pthread_mutex_unlock(&adev->lock); |
| |
| return 0; |
| } |
| |
| static int adev_set_mic_mute(struct audio_hw_device *dev, bool state) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; |
| |
| adev->mic_mute = state; |
| |
| return 0; |
| } |
| |
| static int adev_get_mic_mute(const struct audio_hw_device *dev, bool *state) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)dev; |
| |
| *state = adev->mic_mute; |
| |
| return 0; |
| } |
| |
| static size_t adev_get_input_buffer_size(const struct audio_hw_device *dev, |
| const struct audio_config *config) |
| { |
| size_t size; |
| int channel_count = popcount(config->channel_mask); |
| if (check_input_parameters(config->sample_rate, config->format, channel_count) != 0) |
| return 0; |
| |
| return get_input_buffer_size(config->sample_rate, config->format, channel_count); |
| } |
| |
| static int adev_open_input_stream(struct audio_hw_device *dev, |
| audio_io_handle_t handle, |
| audio_devices_t devices, |
| struct audio_config *config, |
| struct audio_stream_in **stream_in) |
| { |
| struct tuna_audio_device *ladev = (struct tuna_audio_device *)dev; |
| struct tuna_stream_in *in; |
| int ret; |
| int channel_count = popcount(config->channel_mask); |
| |
| *stream_in = NULL; |
| |
| if (check_input_parameters(config->sample_rate, config->format, channel_count) != 0) |
| return -EINVAL; |
| |
| in = (struct tuna_stream_in *)calloc(1, sizeof(struct tuna_stream_in)); |
| if (!in) |
| return -ENOMEM; |
| |
| in->stream.common.get_sample_rate = in_get_sample_rate; |
| in->stream.common.set_sample_rate = in_set_sample_rate; |
| in->stream.common.get_buffer_size = in_get_buffer_size; |
| in->stream.common.get_channels = in_get_channels; |
| in->stream.common.get_format = in_get_format; |
| in->stream.common.set_format = in_set_format; |
| in->stream.common.standby = in_standby; |
| in->stream.common.dump = in_dump; |
| in->stream.common.set_parameters = in_set_parameters; |
| in->stream.common.get_parameters = in_get_parameters; |
| in->stream.common.add_audio_effect = in_add_audio_effect; |
| in->stream.common.remove_audio_effect = in_remove_audio_effect; |
| in->stream.set_gain = in_set_gain; |
| in->stream.read = in_read; |
| in->stream.get_input_frames_lost = in_get_input_frames_lost; |
| |
| in->requested_rate = config->sample_rate; |
| |
| memcpy(&in->config, &pcm_config_mm_ul, sizeof(pcm_config_mm_ul)); |
| in->config.channels = channel_count; |
| |
| in->main_channels = config->channel_mask; |
| |
| /* initialisation of preprocessor structure array is implicit with the calloc. |
| * same for in->aux_channels and in->aux_channels_changed */ |
| |
| if (in->requested_rate != in->config.rate) { |
| in->buf_provider.get_next_buffer = get_next_buffer; |
| in->buf_provider.release_buffer = release_buffer; |
| |
| ret = create_resampler(in->config.rate, |
| in->requested_rate, |
| in->config.channels, |
| RESAMPLER_QUALITY_DEFAULT, |
| &in->buf_provider, |
| &in->resampler); |
| if (ret != 0) { |
| ret = -EINVAL; |
| goto err; |
| } |
| } |
| |
| in->dev = ladev; |
| in->standby = 1; |
| in->device = devices & ~AUDIO_DEVICE_BIT_IN; |
| |
| *stream_in = &in->stream; |
| return 0; |
| |
| err: |
| if (in->resampler) |
| release_resampler(in->resampler); |
| |
| free(in); |
| return ret; |
| } |
| |
| static void adev_close_input_stream(struct audio_hw_device *dev, |
| struct audio_stream_in *stream) |
| { |
| struct tuna_stream_in *in = (struct tuna_stream_in *)stream; |
| int i; |
| |
| in_standby(&stream->common); |
| |
| for (i = 0; i < in->num_preprocessors; i++) { |
| free(in->preprocessors[i].channel_configs); |
| } |
| |
| free(in->read_buf); |
| if (in->resampler) { |
| release_resampler(in->resampler); |
| } |
| if (in->proc_buf_in) |
| free(in->proc_buf_in); |
| if (in->proc_buf_out) |
| free(in->proc_buf_out); |
| if (in->ref_buf) |
| free(in->ref_buf); |
| |
| free(stream); |
| return; |
| } |
| |
| static int adev_dump(const audio_hw_device_t *device, int fd) |
| { |
| return 0; |
| } |
| |
| static int adev_close(hw_device_t *device) |
| { |
| struct tuna_audio_device *adev = (struct tuna_audio_device *)device; |
| |
| /* RIL */ |
| ril_close(&adev->ril); |
| |
| mixer_close(adev->mixer); |
| free(device); |
| return 0; |
| } |
| |
| static int adev_open(const hw_module_t* module, const char* name, |
| hw_device_t** device) |
| { |
| struct tuna_audio_device *adev; |
| int ret; |
| |
| if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0) |
| return -EINVAL; |
| |
| adev = calloc(1, sizeof(struct tuna_audio_device)); |
| if (!adev) |
| return -ENOMEM; |
| |
| adev->hw_device.common.tag = HARDWARE_DEVICE_TAG; |
| adev->hw_device.common.version = AUDIO_DEVICE_API_VERSION_2_0; |
| adev->hw_device.common.module = (struct hw_module_t *) module; |
| adev->hw_device.common.close = adev_close; |
| |
| adev->hw_device.init_check = adev_init_check; |
| adev->hw_device.set_voice_volume = adev_set_voice_volume; |
| adev->hw_device.set_master_volume = adev_set_master_volume; |
| adev->hw_device.set_mode = adev_set_mode; |
| adev->hw_device.set_mic_mute = adev_set_mic_mute; |
| adev->hw_device.get_mic_mute = adev_get_mic_mute; |
| adev->hw_device.set_parameters = adev_set_parameters; |
| adev->hw_device.get_parameters = adev_get_parameters; |
| adev->hw_device.get_input_buffer_size = adev_get_input_buffer_size; |
| adev->hw_device.open_output_stream = adev_open_output_stream; |
| adev->hw_device.close_output_stream = adev_close_output_stream; |
| adev->hw_device.open_input_stream = adev_open_input_stream; |
| adev->hw_device.close_input_stream = adev_close_input_stream; |
| adev->hw_device.dump = adev_dump; |
| |
| adev->mixer = mixer_open(CARD_OMAP4_ABE); |
| if (!adev->mixer) { |
| free(adev); |
| ALOGE("Unable to open the mixer, aborting."); |
| return -EINVAL; |
| } |
| |
| adev->mixer_ctls.dl1_eq = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_EQUALIZER); |
| adev->mixer_ctls.mm_dl1_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_MEDIA_PLAYBACK_VOLUME); |
| adev->mixer_ctls.tones_dl1_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_TONES_PLAYBACK_VOLUME); |
| adev->mixer_ctls.mm_dl2_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_MEDIA_PLAYBACK_VOLUME); |
| adev->mixer_ctls.vx_dl2_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_VOICE_PLAYBACK_VOLUME); |
| adev->mixer_ctls.tones_dl2_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_TONES_PLAYBACK_VOLUME); |
| adev->mixer_ctls.mm_dl1 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_MIXER_MULTIMEDIA); |
| adev->mixer_ctls.vx_dl1 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_MIXER_VOICE); |
| adev->mixer_ctls.tones_dl1 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_MIXER_TONES); |
| adev->mixer_ctls.mm_dl2 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_MIXER_MULTIMEDIA); |
| adev->mixer_ctls.vx_dl2 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_MIXER_VOICE); |
| adev->mixer_ctls.tones_dl2 = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_MIXER_TONES); |
| adev->mixer_ctls.dl2_mono = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL2_MONO_MIXER); |
| adev->mixer_ctls.dl1_headset = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_PDM_SWITCH); |
| adev->mixer_ctls.dl1_bt = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_DL1_BT_VX_SWITCH); |
| adev->mixer_ctls.earpiece_enable = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_EARPHONE_ENABLE_SWITCH); |
| adev->mixer_ctls.left_capture = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_ANALOG_LEFT_CAPTURE_ROUTE); |
| adev->mixer_ctls.right_capture = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_ANALOG_RIGHT_CAPTURE_ROUTE); |
| adev->mixer_ctls.amic_ul_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_AMIC_UL_VOLUME); |
| adev->mixer_ctls.voice_ul_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_AUDUL_VOICE_UL_VOLUME); |
| adev->mixer_ctls.sidetone_capture = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_SIDETONE_MIXER_CAPTURE); |
| adev->mixer_ctls.headset_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_HEADSET_PLAYBACK_VOLUME); |
| adev->mixer_ctls.speaker_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_HANDSFREE_PLAYBACK_VOLUME); |
| adev->mixer_ctls.earpiece_volume = mixer_get_ctl_by_name(adev->mixer, |
| MIXER_EARPHONE_PLAYBACK_VOLUME); |
| |
| if (!adev->mixer_ctls.dl1_eq || |
| !adev->mixer_ctls.mm_dl1_volume || |
| !adev->mixer_ctls.tones_dl1_volume || |
| !adev->mixer_ctls.mm_dl2_volume || |
| !adev->mixer_ctls.vx_dl2_volume || |
| !adev->mixer_ctls.tones_dl2_volume || |
| !adev->mixer_ctls.mm_dl1 || |
| !adev->mixer_ctls.vx_dl1 || |
| !adev->mixer_ctls.tones_dl1 || |
| !adev->mixer_ctls.mm_dl2 || |
| !adev->mixer_ctls.vx_dl2 || |
| !adev->mixer_ctls.tones_dl2 || |
| !adev->mixer_ctls.dl2_mono || |
| !adev->mixer_ctls.dl1_headset || |
| !adev->mixer_ctls.dl1_bt || |
| !adev->mixer_ctls.earpiece_enable || |
| !adev->mixer_ctls.left_capture || |
| !adev->mixer_ctls.right_capture || |
| !adev->mixer_ctls.amic_ul_volume || |
| !adev->mixer_ctls.voice_ul_volume || |
| !adev->mixer_ctls.sidetone_capture || |
| !adev->mixer_ctls.headset_volume || |
| !adev->mixer_ctls.speaker_volume || |
| !adev->mixer_ctls.earpiece_volume) { |
| mixer_close(adev->mixer); |
| free(adev); |
| ALOGE("Unable to locate all mixer controls, aborting."); |
| return -EINVAL; |
| } |
| |
| /* Set the default route before the PCM stream is opened */ |
| pthread_mutex_lock(&adev->lock); |
| set_route_by_array(adev->mixer, defaults, 1); |
| adev->mode = AUDIO_MODE_NORMAL; |
| adev->out_device = AUDIO_DEVICE_OUT_SPEAKER; |
| adev->in_device = AUDIO_DEVICE_IN_BUILTIN_MIC & ~AUDIO_DEVICE_BIT_IN; |
| select_output_device(adev); |
| |
| adev->pcm_modem_dl = NULL; |
| adev->pcm_modem_ul = NULL; |
| adev->voice_volume = 1.0f; |
| adev->tty_mode = TTY_MODE_OFF; |
| adev->device_is_toro = is_device_toro(); |
| adev->bluetooth_nrec = true; |
| adev->wb_amr = 0; |
| |
| /* RIL */ |
| ril_open(&adev->ril); |
| pthread_mutex_unlock(&adev->lock); |
| /* register callback for wideband AMR setting */ |
| ril_register_set_wb_amr_callback(audio_set_wb_amr_callback, (void *)adev); |
| |
| *device = &adev->hw_device.common; |
| |
| return 0; |
| } |
| |
| static struct hw_module_methods_t hal_module_methods = { |
| .open = adev_open, |
| }; |
| |
| struct audio_module HAL_MODULE_INFO_SYM = { |
| .common = { |
| .tag = HARDWARE_MODULE_TAG, |
| .module_api_version = AUDIO_MODULE_API_VERSION_0_1, |
| .hal_api_version = HARDWARE_HAL_API_VERSION, |
| .id = AUDIO_HARDWARE_MODULE_ID, |
| .name = "Tuna audio HW HAL", |
| .author = "The Android Open Source Project", |
| .methods = &hal_module_methods, |
| }, |
| }; |