| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include <errno.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| |
| #define LOG_TAG "Tuna PowerHAL" |
| #include <utils/Log.h> |
| |
| #include <hardware/hardware.h> |
| #include <hardware/power.h> |
| |
| #define BOOSTPULSE_PATH "/sys/devices/system/cpu/cpufreq/interactive/boostpulse" |
| |
| struct tuna_power_module { |
| struct power_module base; |
| pthread_mutex_t lock; |
| int boostpulse_fd; |
| int boostpulse_warned; |
| }; |
| |
| static void sysfs_write(char *path, char *s) |
| { |
| char buf[80]; |
| int len; |
| int fd = open(path, O_WRONLY); |
| |
| if (fd < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error opening %s: %s\n", path, buf); |
| return; |
| } |
| |
| len = write(fd, s, strlen(s)); |
| if (len < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error writing to %s: %s\n", path, buf); |
| } |
| |
| close(fd); |
| } |
| |
| static void tuna_power_init(struct power_module *module) |
| { |
| /* |
| * cpufreq interactive governor: timer 20ms, min sample 60ms, |
| * hispeed 700MHz at load 50%. |
| */ |
| |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/timer_rate", |
| "20000"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/min_sample_time", |
| "60000"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/hispeed_freq", |
| "700000"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load", |
| "50"); |
| sysfs_write("/sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay", |
| "100000"); |
| } |
| |
| static int boostpulse_open(struct tuna_power_module *tuna) |
| { |
| char buf[80]; |
| |
| pthread_mutex_lock(&tuna->lock); |
| |
| if (tuna->boostpulse_fd < 0) { |
| tuna->boostpulse_fd = open(BOOSTPULSE_PATH, O_WRONLY); |
| |
| if (tuna->boostpulse_fd < 0) { |
| if (!tuna->boostpulse_warned) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error opening %s: %s\n", BOOSTPULSE_PATH, buf); |
| tuna->boostpulse_warned = 1; |
| } |
| } |
| } |
| |
| pthread_mutex_unlock(&tuna->lock); |
| return tuna->boostpulse_fd; |
| } |
| |
| static void tuna_power_set_interactive(struct power_module *module, int on) |
| { |
| /* |
| * Lower maximum frequency when screen is off. CPU 0 and 1 share a |
| * cpufreq policy. |
| */ |
| |
| sysfs_write("/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq", |
| on ? "1200000" : "700000"); |
| } |
| |
| static void tuna_power_hint(struct power_module *module, power_hint_t hint, |
| void *data) |
| { |
| struct tuna_power_module *tuna = (struct tuna_power_module *) module; |
| char buf[80]; |
| int len; |
| |
| switch (hint) { |
| case POWER_HINT_INTERACTION: |
| if (boostpulse_open(tuna) >= 0) { |
| len = write(tuna->boostpulse_fd, "1", 1); |
| |
| if (len < 0) { |
| strerror_r(errno, buf, sizeof(buf)); |
| ALOGE("Error writing to %s: %s\n", BOOSTPULSE_PATH, buf); |
| } |
| } |
| break; |
| |
| case POWER_HINT_VSYNC: |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static struct hw_module_methods_t power_module_methods = { |
| .open = NULL, |
| }; |
| |
| struct tuna_power_module HAL_MODULE_INFO_SYM = { |
| base: { |
| common: { |
| tag: HARDWARE_MODULE_TAG, |
| module_api_version: POWER_MODULE_API_VERSION_0_2, |
| hal_api_version: HARDWARE_HAL_API_VERSION, |
| id: POWER_HARDWARE_MODULE_ID, |
| name: "Tuna Power HAL", |
| author: "The Android Open Source Project", |
| methods: &power_module_methods, |
| }, |
| |
| init: tuna_power_init, |
| setInteractive: tuna_power_set_interactive, |
| powerHint: tuna_power_hint, |
| }, |
| |
| lock: PTHREAD_MUTEX_INITIALIZER, |
| boostpulse_fd: -1, |
| boostpulse_warned: 0, |
| }; |