| /* |
| * drivers/mmc/host/sdhci-spear.c |
| * |
| * Support of SDHCI platform devices for spear soc family |
| * |
| * Copyright (C) 2010 ST Microelectronics |
| * Viresh Kumar<viresh.kumar@st.com> |
| * |
| * Inspired by sdhci-pltfm.c |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/highmem.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdhci-spear.h> |
| #include <linux/io.h> |
| #include "sdhci.h" |
| |
| struct spear_sdhci { |
| struct clk *clk; |
| struct sdhci_plat_data *data; |
| }; |
| |
| /* sdhci ops */ |
| static struct sdhci_ops sdhci_pltfm_ops = { |
| /* Nothing to do for now. */ |
| }; |
| |
| /* gpio card detection interrupt handler */ |
| static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) |
| { |
| struct platform_device *pdev = dev_id; |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); |
| unsigned long gpio_irq_type; |
| int val; |
| |
| val = gpio_get_value(sdhci->data->card_int_gpio); |
| |
| /* val == 1 -> card removed, val == 0 -> card inserted */ |
| /* if card removed - set irq for low level, else vice versa */ |
| gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH; |
| irq_set_irq_type(irq, gpio_irq_type); |
| |
| if (sdhci->data->card_power_gpio >= 0) { |
| if (!sdhci->data->power_always_enb) { |
| /* if card inserted, give power, otherwise remove it */ |
| val = sdhci->data->power_active_high ? !val : val ; |
| gpio_set_value(sdhci->data->card_power_gpio, val); |
| } |
| } |
| |
| /* inform sdhci driver about card insertion/removal */ |
| tasklet_schedule(&host->card_tasklet); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit sdhci_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct resource *iomem; |
| struct spear_sdhci *sdhci; |
| int ret; |
| |
| BUG_ON(pdev == NULL); |
| |
| iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!iomem) { |
| ret = -ENOMEM; |
| dev_dbg(&pdev->dev, "memory resource not defined\n"); |
| goto err; |
| } |
| |
| if (!request_mem_region(iomem->start, resource_size(iomem), |
| "spear-sdhci")) { |
| ret = -EBUSY; |
| dev_dbg(&pdev->dev, "cannot request region\n"); |
| goto err; |
| } |
| |
| sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL); |
| if (!sdhci) { |
| ret = -ENOMEM; |
| dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); |
| goto err_kzalloc; |
| } |
| |
| /* clk enable */ |
| sdhci->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(sdhci->clk)) { |
| ret = PTR_ERR(sdhci->clk); |
| dev_dbg(&pdev->dev, "Error getting clock\n"); |
| goto err_clk_get; |
| } |
| |
| ret = clk_enable(sdhci->clk); |
| if (ret) { |
| dev_dbg(&pdev->dev, "Error enabling clock\n"); |
| goto err_clk_enb; |
| } |
| |
| /* overwrite platform_data */ |
| sdhci->data = dev_get_platdata(&pdev->dev); |
| pdev->dev.platform_data = sdhci; |
| |
| if (pdev->dev.parent) |
| host = sdhci_alloc_host(pdev->dev.parent, 0); |
| else |
| host = sdhci_alloc_host(&pdev->dev, 0); |
| |
| if (IS_ERR(host)) { |
| ret = PTR_ERR(host); |
| dev_dbg(&pdev->dev, "error allocating host\n"); |
| goto err_alloc_host; |
| } |
| |
| host->hw_name = "sdhci"; |
| host->ops = &sdhci_pltfm_ops; |
| host->irq = platform_get_irq(pdev, 0); |
| host->quirks = SDHCI_QUIRK_BROKEN_ADMA; |
| |
| host->ioaddr = ioremap(iomem->start, resource_size(iomem)); |
| if (!host->ioaddr) { |
| ret = -ENOMEM; |
| dev_dbg(&pdev->dev, "failed to remap registers\n"); |
| goto err_ioremap; |
| } |
| |
| ret = sdhci_add_host(host); |
| if (ret) { |
| dev_dbg(&pdev->dev, "error adding host\n"); |
| goto err_add_host; |
| } |
| |
| platform_set_drvdata(pdev, host); |
| |
| /* |
| * It is optional to use GPIOs for sdhci Power control & sdhci card |
| * interrupt detection. If sdhci->data is NULL, then use original sdhci |
| * lines otherwise GPIO lines. |
| * If GPIO is selected for power control, then power should be disabled |
| * after card removal and should be enabled when card insertion |
| * interrupt occurs |
| */ |
| if (!sdhci->data) |
| return 0; |
| |
| if (sdhci->data->card_power_gpio >= 0) { |
| int val = 0; |
| |
| ret = gpio_request(sdhci->data->card_power_gpio, "sdhci"); |
| if (ret < 0) { |
| dev_dbg(&pdev->dev, "gpio request fail: %d\n", |
| sdhci->data->card_power_gpio); |
| goto err_pgpio_request; |
| } |
| |
| if (sdhci->data->power_always_enb) |
| val = sdhci->data->power_active_high; |
| else |
| val = !sdhci->data->power_active_high; |
| |
| ret = gpio_direction_output(sdhci->data->card_power_gpio, val); |
| if (ret) { |
| dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", |
| sdhci->data->card_power_gpio); |
| goto err_pgpio_direction; |
| } |
| } |
| |
| if (sdhci->data->card_int_gpio >= 0) { |
| ret = gpio_request(sdhci->data->card_int_gpio, "sdhci"); |
| if (ret < 0) { |
| dev_dbg(&pdev->dev, "gpio request fail: %d\n", |
| sdhci->data->card_int_gpio); |
| goto err_igpio_request; |
| } |
| |
| ret = gpio_direction_input(sdhci->data->card_int_gpio); |
| if (ret) { |
| dev_dbg(&pdev->dev, "gpio set direction fail: %d\n", |
| sdhci->data->card_int_gpio); |
| goto err_igpio_direction; |
| } |
| ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio), |
| sdhci_gpio_irq, IRQF_TRIGGER_LOW, |
| mmc_hostname(host->mmc), pdev); |
| if (ret) { |
| dev_dbg(&pdev->dev, "gpio request irq fail: %d\n", |
| sdhci->data->card_int_gpio); |
| goto err_igpio_request_irq; |
| } |
| |
| } |
| |
| return 0; |
| |
| err_igpio_request_irq: |
| err_igpio_direction: |
| if (sdhci->data->card_int_gpio >= 0) |
| gpio_free(sdhci->data->card_int_gpio); |
| err_igpio_request: |
| err_pgpio_direction: |
| if (sdhci->data->card_power_gpio >= 0) |
| gpio_free(sdhci->data->card_power_gpio); |
| err_pgpio_request: |
| platform_set_drvdata(pdev, NULL); |
| sdhci_remove_host(host, 1); |
| err_add_host: |
| iounmap(host->ioaddr); |
| err_ioremap: |
| sdhci_free_host(host); |
| err_alloc_host: |
| clk_disable(sdhci->clk); |
| err_clk_enb: |
| clk_put(sdhci->clk); |
| err_clk_get: |
| kfree(sdhci); |
| err_kzalloc: |
| release_mem_region(iomem->start, resource_size(iomem)); |
| err: |
| dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); |
| return ret; |
| } |
| |
| static int __devexit sdhci_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev); |
| int dead; |
| u32 scratch; |
| |
| if (sdhci->data) { |
| if (sdhci->data->card_int_gpio >= 0) { |
| free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev); |
| gpio_free(sdhci->data->card_int_gpio); |
| } |
| |
| if (sdhci->data->card_power_gpio >= 0) |
| gpio_free(sdhci->data->card_power_gpio); |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| dead = 0; |
| scratch = readl(host->ioaddr + SDHCI_INT_STATUS); |
| if (scratch == (u32)-1) |
| dead = 1; |
| |
| sdhci_remove_host(host, dead); |
| iounmap(host->ioaddr); |
| sdhci_free_host(host); |
| clk_disable(sdhci->clk); |
| clk_put(sdhci->clk); |
| kfree(sdhci); |
| if (iomem) |
| release_mem_region(iomem->start, resource_size(iomem)); |
| |
| return 0; |
| } |
| |
| static struct platform_driver sdhci_driver = { |
| .driver = { |
| .name = "sdhci", |
| .owner = THIS_MODULE, |
| }, |
| .probe = sdhci_probe, |
| .remove = __devexit_p(sdhci_remove), |
| }; |
| |
| static int __init sdhci_init(void) |
| { |
| return platform_driver_register(&sdhci_driver); |
| } |
| module_init(sdhci_init); |
| |
| static void __exit sdhci_exit(void) |
| { |
| platform_driver_unregister(&sdhci_driver); |
| } |
| module_exit(sdhci_exit); |
| |
| MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); |
| MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>"); |
| MODULE_LICENSE("GPL v2"); |