| /* |
| * SAMSUNG S5P USB HOST EHCI Controller |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <mach/regs-pmu.h> |
| #include <plat/cpu.h> |
| #include <plat/ehci.h> |
| #include <plat/usb-phy.h> |
| |
| struct s5p_ehci_hcd { |
| struct device *dev; |
| struct usb_hcd *hcd; |
| struct clk *clk; |
| }; |
| |
| static const struct hc_driver s5p_ehci_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "S5P EHCI Host Controller", |
| .hcd_priv_size = sizeof(struct ehci_hcd), |
| |
| .irq = ehci_irq, |
| .flags = HCD_MEMORY | HCD_USB2, |
| |
| .reset = ehci_init, |
| .start = ehci_run, |
| .stop = ehci_stop, |
| .shutdown = ehci_shutdown, |
| |
| .get_frame_number = ehci_get_frame, |
| |
| .urb_enqueue = ehci_urb_enqueue, |
| .urb_dequeue = ehci_urb_dequeue, |
| .endpoint_disable = ehci_endpoint_disable, |
| .endpoint_reset = ehci_endpoint_reset, |
| |
| .hub_status_data = ehci_hub_status_data, |
| .hub_control = ehci_hub_control, |
| .bus_suspend = ehci_bus_suspend, |
| .bus_resume = ehci_bus_resume, |
| |
| .relinquish_port = ehci_relinquish_port, |
| .port_handed_over = ehci_port_handed_over, |
| |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, |
| }; |
| |
| static int __devinit s5p_ehci_probe(struct platform_device *pdev) |
| { |
| struct s5p_ehci_platdata *pdata; |
| struct s5p_ehci_hcd *s5p_ehci; |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| struct resource *res; |
| int irq; |
| int err; |
| |
| pdata = pdev->dev.platform_data; |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform data defined\n"); |
| return -EINVAL; |
| } |
| |
| s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL); |
| if (!s5p_ehci) |
| return -ENOMEM; |
| |
| s5p_ehci->dev = &pdev->dev; |
| |
| hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev, |
| dev_name(&pdev->dev)); |
| if (!hcd) { |
| dev_err(&pdev->dev, "Unable to create HCD\n"); |
| err = -ENOMEM; |
| goto fail_hcd; |
| } |
| |
| s5p_ehci->hcd = hcd; |
| s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); |
| |
| if (IS_ERR(s5p_ehci->clk)) { |
| dev_err(&pdev->dev, "Failed to get usbhost clock\n"); |
| err = PTR_ERR(s5p_ehci->clk); |
| goto fail_clk; |
| } |
| |
| err = clk_enable(s5p_ehci->clk); |
| if (err) |
| goto fail_clken; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); |
| err = -ENXIO; |
| goto fail_io; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| hcd->regs = ioremap(res->start, resource_size(res)); |
| if (!hcd->regs) { |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); |
| err = -ENOMEM; |
| goto fail_io; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "Failed to get IRQ\n"); |
| err = -ENODEV; |
| goto fail; |
| } |
| |
| if (pdata->phy_init) |
| pdata->phy_init(pdev, S5P_USB_PHY_HOST); |
| |
| ehci = hcd_to_ehci(hcd); |
| ehci->caps = hcd->regs; |
| ehci->regs = hcd->regs + |
| HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); |
| |
| dbg_hcs_params(ehci, "reset"); |
| dbg_hcc_params(ehci, "reset"); |
| |
| /* cache this readonly data; minimize chip reads */ |
| ehci->hcs_params = readl(&ehci->caps->hcs_params); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); |
| goto fail; |
| } |
| |
| platform_set_drvdata(pdev, s5p_ehci); |
| |
| return 0; |
| |
| fail: |
| iounmap(hcd->regs); |
| fail_io: |
| clk_disable(s5p_ehci->clk); |
| fail_clken: |
| clk_put(s5p_ehci->clk); |
| fail_clk: |
| usb_put_hcd(hcd); |
| fail_hcd: |
| kfree(s5p_ehci); |
| return err; |
| } |
| |
| static int __devexit s5p_ehci_remove(struct platform_device *pdev) |
| { |
| struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; |
| struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = s5p_ehci->hcd; |
| |
| usb_remove_hcd(hcd); |
| |
| if (pdata && pdata->phy_exit) |
| pdata->phy_exit(pdev, S5P_USB_PHY_HOST); |
| |
| iounmap(hcd->regs); |
| |
| clk_disable(s5p_ehci->clk); |
| clk_put(s5p_ehci->clk); |
| |
| usb_put_hcd(hcd); |
| kfree(s5p_ehci); |
| |
| return 0; |
| } |
| |
| static void s5p_ehci_shutdown(struct platform_device *pdev) |
| { |
| struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); |
| struct usb_hcd *hcd = s5p_ehci->hcd; |
| |
| if (hcd->driver->shutdown) |
| hcd->driver->shutdown(hcd); |
| } |
| |
| #ifdef CONFIG_PM |
| static int s5p_ehci_suspend(struct device *dev) |
| { |
| struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); |
| struct usb_hcd *hcd = s5p_ehci->hcd; |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct platform_device *pdev = to_platform_device(dev); |
| struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; |
| unsigned long flags; |
| int rc = 0; |
| |
| if (time_before(jiffies, ehci->next_statechange)) |
| msleep(20); |
| |
| /* |
| * Root hub was already suspended. Disable irq emission and |
| * mark HW unaccessible. The PM and USB cores make sure that |
| * the root hub is either suspended or stopped. |
| */ |
| ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); |
| spin_lock_irqsave(&ehci->lock, flags); |
| ehci_writel(ehci, 0, &ehci->regs->intr_enable); |
| (void)ehci_readl(ehci, &ehci->regs->intr_enable); |
| |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| spin_unlock_irqrestore(&ehci->lock, flags); |
| |
| if (pdata && pdata->phy_exit) |
| pdata->phy_exit(pdev, S5P_USB_PHY_HOST); |
| |
| return rc; |
| } |
| |
| static int s5p_ehci_resume(struct device *dev) |
| { |
| struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); |
| struct usb_hcd *hcd = s5p_ehci->hcd; |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| struct platform_device *pdev = to_platform_device(dev); |
| struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; |
| |
| if (pdata && pdata->phy_init) |
| pdata->phy_init(pdev, S5P_USB_PHY_HOST); |
| |
| if (time_before(jiffies, ehci->next_statechange)) |
| msleep(100); |
| |
| /* Mark hardware accessible again as we are out of D3 state by now */ |
| set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| |
| if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { |
| int mask = INTR_MASK; |
| |
| ehci_prepare_ports_for_controller_resume(ehci); |
| if (!hcd->self.root_hub->do_remote_wakeup) |
| mask &= ~STS_PCD; |
| ehci_writel(ehci, mask, &ehci->regs->intr_enable); |
| ehci_readl(ehci, &ehci->regs->intr_enable); |
| return 0; |
| } |
| |
| usb_root_hub_lost_power(hcd->self.root_hub); |
| |
| (void) ehci_halt(ehci); |
| (void) ehci_reset(ehci); |
| |
| /* emptying the schedule aborts any urbs */ |
| spin_lock_irq(&ehci->lock); |
| if (ehci->reclaim) |
| end_unlink_async(ehci); |
| ehci_work(ehci); |
| spin_unlock_irq(&ehci->lock); |
| |
| ehci_writel(ehci, ehci->command, &ehci->regs->command); |
| ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); |
| ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ |
| |
| /* here we "know" root ports should always stay powered */ |
| ehci_port_power(ehci, 1); |
| |
| hcd->state = HC_STATE_SUSPENDED; |
| |
| return 0; |
| } |
| #else |
| #define s5p_ehci_suspend NULL |
| #define s5p_ehci_resume NULL |
| #endif |
| |
| static const struct dev_pm_ops s5p_ehci_pm_ops = { |
| .suspend = s5p_ehci_suspend, |
| .resume = s5p_ehci_resume, |
| }; |
| |
| static struct platform_driver s5p_ehci_driver = { |
| .probe = s5p_ehci_probe, |
| .remove = __devexit_p(s5p_ehci_remove), |
| .shutdown = s5p_ehci_shutdown, |
| .driver = { |
| .name = "s5p-ehci", |
| .owner = THIS_MODULE, |
| .pm = &s5p_ehci_pm_ops, |
| } |
| }; |
| |
| MODULE_ALIAS("platform:s5p-ehci"); |