| /* |
| * OMAP1 cpufreq driver |
| * |
| * CPU frequency scaling for OMAP |
| * |
| * Copyright (C) 2005 Nokia Corporation |
| * Written by Tony Lindgren <tony@atomide.com> |
| * |
| * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King |
| * |
| * Copyright (C) 2007-2008 Texas Instruments, Inc. |
| * Rajendra Nayak <rnayak@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/cpufreq.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/opp.h> |
| |
| #include <asm/system.h> |
| |
| #include <plat/clock.h> |
| #include <plat/omap-pm.h> |
| |
| #include <mach/hardware.h> |
| |
| #define VERY_HI_RATE 900000000 |
| |
| static struct cpufreq_frequency_table *freq_table; |
| static struct clk *mpu_clk; |
| |
| static int omap_verify_speed(struct cpufreq_policy *policy) |
| { |
| if (freq_table) |
| return cpufreq_frequency_table_verify(policy, freq_table); |
| |
| if (policy->cpu) |
| return -EINVAL; |
| |
| cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, |
| policy->cpuinfo.max_freq); |
| |
| policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000; |
| policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000; |
| cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, |
| policy->cpuinfo.max_freq); |
| return 0; |
| } |
| |
| static unsigned int omap_getspeed(unsigned int cpu) |
| { |
| unsigned long rate; |
| |
| if (cpu) |
| return 0; |
| |
| rate = clk_get_rate(mpu_clk) / 1000; |
| return rate; |
| } |
| |
| static int omap_target(struct cpufreq_policy *policy, |
| unsigned int target_freq, |
| unsigned int relation) |
| { |
| struct cpufreq_freqs freqs; |
| int ret = 0; |
| |
| /* Ensure desired rate is within allowed range. Some govenors |
| * (ondemand) will just pass target_freq=0 to get the minimum. */ |
| if (target_freq < policy->min) |
| target_freq = policy->min; |
| if (target_freq > policy->max) |
| target_freq = policy->max; |
| |
| freqs.old = omap_getspeed(0); |
| freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; |
| freqs.cpu = 0; |
| |
| if (freqs.old == freqs.new) |
| return ret; |
| |
| cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); |
| |
| #ifdef CONFIG_CPU_FREQ_DEBUG |
| pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new); |
| #endif |
| ret = clk_set_rate(mpu_clk, freqs.new * 1000); |
| |
| cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); |
| |
| return ret; |
| } |
| |
| static int __init omap_cpu_init(struct cpufreq_policy *policy) |
| { |
| int result = 0; |
| |
| mpu_clk = clk_get(NULL, "mpu"); |
| if (IS_ERR(mpu_clk)) |
| return PTR_ERR(mpu_clk); |
| |
| if (policy->cpu != 0) |
| return -EINVAL; |
| |
| policy->cur = policy->min = policy->max = omap_getspeed(0); |
| |
| clk_init_cpufreq_table(&freq_table); |
| |
| if (freq_table) { |
| result = cpufreq_frequency_table_cpuinfo(policy, freq_table); |
| if (!result) |
| cpufreq_frequency_table_get_attr(freq_table, |
| policy->cpu); |
| } else { |
| policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; |
| policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, |
| VERY_HI_RATE) / 1000; |
| } |
| |
| policy->min = policy->cpuinfo.min_freq; |
| policy->max = policy->cpuinfo.max_freq; |
| policy->cur = omap_getspeed(0); |
| |
| /* FIXME: what's the actual transition time? */ |
| policy->cpuinfo.transition_latency = 300 * 1000; |
| |
| return 0; |
| } |
| |
| static int omap_cpu_exit(struct cpufreq_policy *policy) |
| { |
| clk_exit_cpufreq_table(&freq_table); |
| clk_put(mpu_clk); |
| return 0; |
| } |
| |
| static struct freq_attr *omap_cpufreq_attr[] = { |
| &cpufreq_freq_attr_scaling_available_freqs, |
| NULL, |
| }; |
| |
| static struct cpufreq_driver omap_driver = { |
| .flags = CPUFREQ_STICKY, |
| .verify = omap_verify_speed, |
| .target = omap_target, |
| .get = omap_getspeed, |
| .init = omap_cpu_init, |
| .exit = omap_cpu_exit, |
| .name = "omap1", |
| .attr = omap_cpufreq_attr, |
| }; |
| |
| static int __init omap_cpufreq_init(void) |
| { |
| return cpufreq_register_driver(&omap_driver); |
| } |
| |
| static void __exit omap_cpufreq_exit(void) |
| { |
| cpufreq_unregister_driver(&omap_driver); |
| } |
| |
| MODULE_DESCRIPTION("cpufreq driver for OMAP1 SOCs"); |
| MODULE_LICENSE("GPL"); |
| module_init(omap_cpufreq_init); |
| module_exit(omap_cpufreq_exit); |