| /* Common capabilities, needed by capability.o. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/capability.h> |
| #include <linux/audit.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/security.h> |
| #include <linux/file.h> |
| #include <linux/mm.h> |
| #include <linux/mman.h> |
| #include <linux/pagemap.h> |
| #include <linux/swap.h> |
| #include <linux/skbuff.h> |
| #include <linux/netlink.h> |
| #include <linux/ptrace.h> |
| #include <linux/xattr.h> |
| #include <linux/hugetlb.h> |
| #include <linux/mount.h> |
| #include <linux/sched.h> |
| #include <linux/prctl.h> |
| #include <linux/securebits.h> |
| #include <linux/user_namespace.h> |
| |
| #ifdef CONFIG_ANDROID_PARANOID_NETWORK |
| #include <linux/android_aid.h> |
| #endif |
| |
| /* |
| * If a non-root user executes a setuid-root binary in |
| * !secure(SECURE_NOROOT) mode, then we raise capabilities. |
| * However if fE is also set, then the intent is for only |
| * the file capabilities to be applied, and the setuid-root |
| * bit is left on either to change the uid (plausible) or |
| * to get full privilege on a kernel without file capabilities |
| * support. So in that case we do not raise capabilities. |
| * |
| * Warn if that happens, once per boot. |
| */ |
| static void warn_setuid_and_fcaps_mixed(const char *fname) |
| { |
| static int warned; |
| if (!warned) { |
| printk(KERN_INFO "warning: `%s' has both setuid-root and" |
| " effective capabilities. Therefore not raising all" |
| " capabilities.\n", fname); |
| warned = 1; |
| } |
| } |
| |
| int cap_netlink_send(struct sock *sk, struct sk_buff *skb) |
| { |
| return 0; |
| } |
| |
| int cap_netlink_recv(struct sk_buff *skb, int cap) |
| { |
| if (!cap_raised(current_cap(), cap)) |
| return -EPERM; |
| return 0; |
| } |
| EXPORT_SYMBOL(cap_netlink_recv); |
| |
| /** |
| * cap_capable - Determine whether a task has a particular effective capability |
| * @tsk: The task to query |
| * @cred: The credentials to use |
| * @ns: The user namespace in which we need the capability |
| * @cap: The capability to check for |
| * @audit: Whether to write an audit message or not |
| * |
| * Determine whether the nominated task has the specified capability amongst |
| * its effective set, returning 0 if it does, -ve if it does not. |
| * |
| * NOTE WELL: cap_has_capability() cannot be used like the kernel's capable() |
| * and has_capability() functions. That is, it has the reverse semantics: |
| * cap_has_capability() returns 0 when a task has a capability, but the |
| * kernel's capable() and has_capability() returns 1 for this case. |
| */ |
| int cap_capable(struct task_struct *tsk, const struct cred *cred, |
| struct user_namespace *targ_ns, int cap, int audit) |
| { |
| if (cap == CAP_NET_RAW && in_egroup_p(AID_NET_RAW)) |
| return 0; |
| if (cap == CAP_NET_ADMIN && in_egroup_p(AID_NET_ADMIN)) |
| return 0; |
| |
| for (;;) { |
| /* The creator of the user namespace has all caps. */ |
| if (targ_ns != &init_user_ns && targ_ns->creator == cred->user) |
| return 0; |
| |
| /* Do we have the necessary capabilities? */ |
| if (targ_ns == cred->user->user_ns) |
| return cap_raised(cred->cap_effective, cap) ? 0 : -EPERM; |
| |
| /* Have we tried all of the parent namespaces? */ |
| if (targ_ns == &init_user_ns) |
| return -EPERM; |
| |
| /* |
| *If you have a capability in a parent user ns, then you have |
| * it over all children user namespaces as well. |
| */ |
| targ_ns = targ_ns->creator->user_ns; |
| } |
| |
| /* We never get here */ |
| } |
| |
| /** |
| * cap_settime - Determine whether the current process may set the system clock |
| * @ts: The time to set |
| * @tz: The timezone to set |
| * |
| * Determine whether the current process may set the system clock and timezone |
| * information, returning 0 if permission granted, -ve if denied. |
| */ |
| int cap_settime(const struct timespec *ts, const struct timezone *tz) |
| { |
| if (!capable(CAP_SYS_TIME)) |
| return -EPERM; |
| return 0; |
| } |
| |
| /** |
| * cap_ptrace_access_check - Determine whether the current process may access |
| * another |
| * @child: The process to be accessed |
| * @mode: The mode of attachment. |
| * |
| * If we are in the same or an ancestor user_ns and have all the target |
| * task's capabilities, then ptrace access is allowed. |
| * If we have the ptrace capability to the target user_ns, then ptrace |
| * access is allowed. |
| * Else denied. |
| * |
| * Determine whether a process may access another, returning 0 if permission |
| * granted, -ve if denied. |
| */ |
| int cap_ptrace_access_check(struct task_struct *child, unsigned int mode) |
| { |
| int ret = 0; |
| const struct cred *cred, *child_cred; |
| |
| rcu_read_lock(); |
| cred = current_cred(); |
| child_cred = __task_cred(child); |
| if (cred->user->user_ns == child_cred->user->user_ns && |
| cap_issubset(child_cred->cap_permitted, cred->cap_permitted)) |
| goto out; |
| if (ns_capable(child_cred->user->user_ns, CAP_SYS_PTRACE)) |
| goto out; |
| ret = -EPERM; |
| out: |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * cap_ptrace_traceme - Determine whether another process may trace the current |
| * @parent: The task proposed to be the tracer |
| * |
| * If parent is in the same or an ancestor user_ns and has all current's |
| * capabilities, then ptrace access is allowed. |
| * If parent has the ptrace capability to current's user_ns, then ptrace |
| * access is allowed. |
| * Else denied. |
| * |
| * Determine whether the nominated task is permitted to trace the current |
| * process, returning 0 if permission is granted, -ve if denied. |
| */ |
| int cap_ptrace_traceme(struct task_struct *parent) |
| { |
| int ret = 0; |
| const struct cred *cred, *child_cred; |
| |
| rcu_read_lock(); |
| cred = __task_cred(parent); |
| child_cred = current_cred(); |
| if (cred->user->user_ns == child_cred->user->user_ns && |
| cap_issubset(child_cred->cap_permitted, cred->cap_permitted)) |
| goto out; |
| if (has_ns_capability(parent, child_cred->user->user_ns, CAP_SYS_PTRACE)) |
| goto out; |
| ret = -EPERM; |
| out: |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * cap_capget - Retrieve a task's capability sets |
| * @target: The task from which to retrieve the capability sets |
| * @effective: The place to record the effective set |
| * @inheritable: The place to record the inheritable set |
| * @permitted: The place to record the permitted set |
| * |
| * This function retrieves the capabilities of the nominated task and returns |
| * them to the caller. |
| */ |
| int cap_capget(struct task_struct *target, kernel_cap_t *effective, |
| kernel_cap_t *inheritable, kernel_cap_t *permitted) |
| { |
| const struct cred *cred; |
| |
| /* Derived from kernel/capability.c:sys_capget. */ |
| rcu_read_lock(); |
| cred = __task_cred(target); |
| *effective = cred->cap_effective; |
| *inheritable = cred->cap_inheritable; |
| *permitted = cred->cap_permitted; |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| /* |
| * Determine whether the inheritable capabilities are limited to the old |
| * permitted set. Returns 1 if they are limited, 0 if they are not. |
| */ |
| static inline int cap_inh_is_capped(void) |
| { |
| |
| /* they are so limited unless the current task has the CAP_SETPCAP |
| * capability |
| */ |
| if (cap_capable(current, current_cred(), |
| current_cred()->user->user_ns, CAP_SETPCAP, |
| SECURITY_CAP_AUDIT) == 0) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * cap_capset - Validate and apply proposed changes to current's capabilities |
| * @new: The proposed new credentials; alterations should be made here |
| * @old: The current task's current credentials |
| * @effective: A pointer to the proposed new effective capabilities set |
| * @inheritable: A pointer to the proposed new inheritable capabilities set |
| * @permitted: A pointer to the proposed new permitted capabilities set |
| * |
| * This function validates and applies a proposed mass change to the current |
| * process's capability sets. The changes are made to the proposed new |
| * credentials, and assuming no error, will be committed by the caller of LSM. |
| */ |
| int cap_capset(struct cred *new, |
| const struct cred *old, |
| const kernel_cap_t *effective, |
| const kernel_cap_t *inheritable, |
| const kernel_cap_t *permitted) |
| { |
| if (cap_inh_is_capped() && |
| !cap_issubset(*inheritable, |
| cap_combine(old->cap_inheritable, |
| old->cap_permitted))) |
| /* incapable of using this inheritable set */ |
| return -EPERM; |
| |
| if (!cap_issubset(*inheritable, |
| cap_combine(old->cap_inheritable, |
| old->cap_bset))) |
| /* no new pI capabilities outside bounding set */ |
| return -EPERM; |
| |
| /* verify restrictions on target's new Permitted set */ |
| if (!cap_issubset(*permitted, old->cap_permitted)) |
| return -EPERM; |
| |
| /* verify the _new_Effective_ is a subset of the _new_Permitted_ */ |
| if (!cap_issubset(*effective, *permitted)) |
| return -EPERM; |
| |
| new->cap_effective = *effective; |
| new->cap_inheritable = *inheritable; |
| new->cap_permitted = *permitted; |
| return 0; |
| } |
| |
| /* |
| * Clear proposed capability sets for execve(). |
| */ |
| static inline void bprm_clear_caps(struct linux_binprm *bprm) |
| { |
| cap_clear(bprm->cred->cap_permitted); |
| bprm->cap_effective = false; |
| } |
| |
| /** |
| * cap_inode_need_killpriv - Determine if inode change affects privileges |
| * @dentry: The inode/dentry in being changed with change marked ATTR_KILL_PRIV |
| * |
| * Determine if an inode having a change applied that's marked ATTR_KILL_PRIV |
| * affects the security markings on that inode, and if it is, should |
| * inode_killpriv() be invoked or the change rejected? |
| * |
| * Returns 0 if granted; +ve if granted, but inode_killpriv() is required; and |
| * -ve to deny the change. |
| */ |
| int cap_inode_need_killpriv(struct dentry *dentry) |
| { |
| struct inode *inode = dentry->d_inode; |
| int error; |
| |
| if (!inode->i_op->getxattr) |
| return 0; |
| |
| error = inode->i_op->getxattr(dentry, XATTR_NAME_CAPS, NULL, 0); |
| if (error <= 0) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * cap_inode_killpriv - Erase the security markings on an inode |
| * @dentry: The inode/dentry to alter |
| * |
| * Erase the privilege-enhancing security markings on an inode. |
| * |
| * Returns 0 if successful, -ve on error. |
| */ |
| int cap_inode_killpriv(struct dentry *dentry) |
| { |
| struct inode *inode = dentry->d_inode; |
| |
| if (!inode->i_op->removexattr) |
| return 0; |
| |
| return inode->i_op->removexattr(dentry, XATTR_NAME_CAPS); |
| } |
| |
| /* |
| * Calculate the new process capability sets from the capability sets attached |
| * to a file. |
| */ |
| static inline int bprm_caps_from_vfs_caps(struct cpu_vfs_cap_data *caps, |
| struct linux_binprm *bprm, |
| bool *effective, |
| bool *has_cap) |
| { |
| struct cred *new = bprm->cred; |
| unsigned i; |
| int ret = 0; |
| |
| if (caps->magic_etc & VFS_CAP_FLAGS_EFFECTIVE) |
| *effective = true; |
| |
| if (caps->magic_etc & VFS_CAP_REVISION_MASK) |
| *has_cap = true; |
| |
| CAP_FOR_EACH_U32(i) { |
| __u32 permitted = caps->permitted.cap[i]; |
| __u32 inheritable = caps->inheritable.cap[i]; |
| |
| /* |
| * pP' = (X & fP) | (pI & fI) |
| */ |
| new->cap_permitted.cap[i] = |
| (new->cap_bset.cap[i] & permitted) | |
| (new->cap_inheritable.cap[i] & inheritable); |
| |
| if (permitted & ~new->cap_permitted.cap[i]) |
| /* insufficient to execute correctly */ |
| ret = -EPERM; |
| } |
| |
| /* |
| * For legacy apps, with no internal support for recognizing they |
| * do not have enough capabilities, we return an error if they are |
| * missing some "forced" (aka file-permitted) capabilities. |
| */ |
| return *effective ? ret : 0; |
| } |
| |
| /* |
| * Extract the on-exec-apply capability sets for an executable file. |
| */ |
| int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps) |
| { |
| struct inode *inode = dentry->d_inode; |
| __u32 magic_etc; |
| unsigned tocopy, i; |
| int size; |
| struct vfs_cap_data caps; |
| |
| memset(cpu_caps, 0, sizeof(struct cpu_vfs_cap_data)); |
| |
| if (!inode || !inode->i_op->getxattr) |
| return -ENODATA; |
| |
| size = inode->i_op->getxattr((struct dentry *)dentry, XATTR_NAME_CAPS, &caps, |
| XATTR_CAPS_SZ); |
| if (size == -ENODATA || size == -EOPNOTSUPP) |
| /* no data, that's ok */ |
| return -ENODATA; |
| if (size < 0) |
| return size; |
| |
| if (size < sizeof(magic_etc)) |
| return -EINVAL; |
| |
| cpu_caps->magic_etc = magic_etc = le32_to_cpu(caps.magic_etc); |
| |
| switch (magic_etc & VFS_CAP_REVISION_MASK) { |
| case VFS_CAP_REVISION_1: |
| if (size != XATTR_CAPS_SZ_1) |
| return -EINVAL; |
| tocopy = VFS_CAP_U32_1; |
| break; |
| case VFS_CAP_REVISION_2: |
| if (size != XATTR_CAPS_SZ_2) |
| return -EINVAL; |
| tocopy = VFS_CAP_U32_2; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| CAP_FOR_EACH_U32(i) { |
| if (i >= tocopy) |
| break; |
| cpu_caps->permitted.cap[i] = le32_to_cpu(caps.data[i].permitted); |
| cpu_caps->inheritable.cap[i] = le32_to_cpu(caps.data[i].inheritable); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Attempt to get the on-exec apply capability sets for an executable file from |
| * its xattrs and, if present, apply them to the proposed credentials being |
| * constructed by execve(). |
| */ |
| static int get_file_caps(struct linux_binprm *bprm, bool *effective, bool *has_cap) |
| { |
| struct dentry *dentry; |
| int rc = 0; |
| struct cpu_vfs_cap_data vcaps; |
| |
| bprm_clear_caps(bprm); |
| |
| if (!file_caps_enabled) |
| return 0; |
| |
| if (bprm->file->f_vfsmnt->mnt_flags & MNT_NOSUID) |
| return 0; |
| |
| dentry = dget(bprm->file->f_dentry); |
| |
| rc = get_vfs_caps_from_disk(dentry, &vcaps); |
| if (rc < 0) { |
| if (rc == -EINVAL) |
| printk(KERN_NOTICE "%s: get_vfs_caps_from_disk returned %d for %s\n", |
| __func__, rc, bprm->filename); |
| else if (rc == -ENODATA) |
| rc = 0; |
| goto out; |
| } |
| |
| rc = bprm_caps_from_vfs_caps(&vcaps, bprm, effective, has_cap); |
| if (rc == -EINVAL) |
| printk(KERN_NOTICE "%s: cap_from_disk returned %d for %s\n", |
| __func__, rc, bprm->filename); |
| |
| out: |
| dput(dentry); |
| if (rc) |
| bprm_clear_caps(bprm); |
| |
| return rc; |
| } |
| |
| /** |
| * cap_bprm_set_creds - Set up the proposed credentials for execve(). |
| * @bprm: The execution parameters, including the proposed creds |
| * |
| * Set up the proposed credentials for a new execution context being |
| * constructed by execve(). The proposed creds in @bprm->cred is altered, |
| * which won't take effect immediately. Returns 0 if successful, -ve on error. |
| */ |
| int cap_bprm_set_creds(struct linux_binprm *bprm) |
| { |
| const struct cred *old = current_cred(); |
| struct cred *new = bprm->cred; |
| bool effective, has_cap = false; |
| int ret; |
| |
| effective = false; |
| ret = get_file_caps(bprm, &effective, &has_cap); |
| if (ret < 0) |
| return ret; |
| |
| if (!issecure(SECURE_NOROOT)) { |
| /* |
| * If the legacy file capability is set, then don't set privs |
| * for a setuid root binary run by a non-root user. Do set it |
| * for a root user just to cause least surprise to an admin. |
| */ |
| if (has_cap && new->uid != 0 && new->euid == 0) { |
| warn_setuid_and_fcaps_mixed(bprm->filename); |
| goto skip; |
| } |
| /* |
| * To support inheritance of root-permissions and suid-root |
| * executables under compatibility mode, we override the |
| * capability sets for the file. |
| * |
| * If only the real uid is 0, we do not set the effective bit. |
| */ |
| if (new->euid == 0 || new->uid == 0) { |
| /* pP' = (cap_bset & ~0) | (pI & ~0) */ |
| new->cap_permitted = cap_combine(old->cap_bset, |
| old->cap_inheritable); |
| } |
| if (new->euid == 0) |
| effective = true; |
| } |
| skip: |
| |
| /* Don't let someone trace a set[ug]id/setpcap binary with the revised |
| * credentials unless they have the appropriate permit |
| */ |
| if ((new->euid != old->uid || |
| new->egid != old->gid || |
| !cap_issubset(new->cap_permitted, old->cap_permitted)) && |
| bprm->unsafe & ~LSM_UNSAFE_PTRACE_CAP) { |
| /* downgrade; they get no more than they had, and maybe less */ |
| if (!capable(CAP_SETUID)) { |
| new->euid = new->uid; |
| new->egid = new->gid; |
| } |
| new->cap_permitted = cap_intersect(new->cap_permitted, |
| old->cap_permitted); |
| } |
| |
| new->suid = new->fsuid = new->euid; |
| new->sgid = new->fsgid = new->egid; |
| |
| if (effective) |
| new->cap_effective = new->cap_permitted; |
| else |
| cap_clear(new->cap_effective); |
| bprm->cap_effective = effective; |
| |
| /* |
| * Audit candidate if current->cap_effective is set |
| * |
| * We do not bother to audit if 3 things are true: |
| * 1) cap_effective has all caps |
| * 2) we are root |
| * 3) root is supposed to have all caps (SECURE_NOROOT) |
| * Since this is just a normal root execing a process. |
| * |
| * Number 1 above might fail if you don't have a full bset, but I think |
| * that is interesting information to audit. |
| */ |
| if (!cap_isclear(new->cap_effective)) { |
| if (!cap_issubset(CAP_FULL_SET, new->cap_effective) || |
| new->euid != 0 || new->uid != 0 || |
| issecure(SECURE_NOROOT)) { |
| ret = audit_log_bprm_fcaps(bprm, new, old); |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| new->securebits &= ~issecure_mask(SECURE_KEEP_CAPS); |
| return 0; |
| } |
| |
| /** |
| * cap_bprm_secureexec - Determine whether a secure execution is required |
| * @bprm: The execution parameters |
| * |
| * Determine whether a secure execution is required, return 1 if it is, and 0 |
| * if it is not. |
| * |
| * The credentials have been committed by this point, and so are no longer |
| * available through @bprm->cred. |
| */ |
| int cap_bprm_secureexec(struct linux_binprm *bprm) |
| { |
| const struct cred *cred = current_cred(); |
| |
| if (cred->uid != 0) { |
| if (bprm->cap_effective) |
| return 1; |
| if (!cap_isclear(cred->cap_permitted)) |
| return 1; |
| } |
| |
| return (cred->euid != cred->uid || |
| cred->egid != cred->gid); |
| } |
| |
| /** |
| * cap_inode_setxattr - Determine whether an xattr may be altered |
| * @dentry: The inode/dentry being altered |
| * @name: The name of the xattr to be changed |
| * @value: The value that the xattr will be changed to |
| * @size: The size of value |
| * @flags: The replacement flag |
| * |
| * Determine whether an xattr may be altered or set on an inode, returning 0 if |
| * permission is granted, -ve if denied. |
| * |
| * This is used to make sure security xattrs don't get updated or set by those |
| * who aren't privileged to do so. |
| */ |
| int cap_inode_setxattr(struct dentry *dentry, const char *name, |
| const void *value, size_t size, int flags) |
| { |
| if (!strcmp(name, XATTR_NAME_CAPS)) { |
| if (!capable(CAP_SETFCAP)) |
| return -EPERM; |
| return 0; |
| } |
| |
| if (!strncmp(name, XATTR_SECURITY_PREFIX, |
| sizeof(XATTR_SECURITY_PREFIX) - 1) && |
| !capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| return 0; |
| } |
| |
| /** |
| * cap_inode_removexattr - Determine whether an xattr may be removed |
| * @dentry: The inode/dentry being altered |
| * @name: The name of the xattr to be changed |
| * |
| * Determine whether an xattr may be removed from an inode, returning 0 if |
| * permission is granted, -ve if denied. |
| * |
| * This is used to make sure security xattrs don't get removed by those who |
| * aren't privileged to remove them. |
| */ |
| int cap_inode_removexattr(struct dentry *dentry, const char *name) |
| { |
| if (!strcmp(name, XATTR_NAME_CAPS)) { |
| if (!capable(CAP_SETFCAP)) |
| return -EPERM; |
| return 0; |
| } |
| |
| if (!strncmp(name, XATTR_SECURITY_PREFIX, |
| sizeof(XATTR_SECURITY_PREFIX) - 1) && |
| !capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| return 0; |
| } |
| |
| /* |
| * cap_emulate_setxuid() fixes the effective / permitted capabilities of |
| * a process after a call to setuid, setreuid, or setresuid. |
| * |
| * 1) When set*uiding _from_ one of {r,e,s}uid == 0 _to_ all of |
| * {r,e,s}uid != 0, the permitted and effective capabilities are |
| * cleared. |
| * |
| * 2) When set*uiding _from_ euid == 0 _to_ euid != 0, the effective |
| * capabilities of the process are cleared. |
| * |
| * 3) When set*uiding _from_ euid != 0 _to_ euid == 0, the effective |
| * capabilities are set to the permitted capabilities. |
| * |
| * fsuid is handled elsewhere. fsuid == 0 and {r,e,s}uid!= 0 should |
| * never happen. |
| * |
| * -astor |
| * |
| * cevans - New behaviour, Oct '99 |
| * A process may, via prctl(), elect to keep its capabilities when it |
| * calls setuid() and switches away from uid==0. Both permitted and |
| * effective sets will be retained. |
| * Without this change, it was impossible for a daemon to drop only some |
| * of its privilege. The call to setuid(!=0) would drop all privileges! |
| * Keeping uid 0 is not an option because uid 0 owns too many vital |
| * files.. |
| * Thanks to Olaf Kirch and Peter Benie for spotting this. |
| */ |
| static inline void cap_emulate_setxuid(struct cred *new, const struct cred *old) |
| { |
| if ((old->uid == 0 || old->euid == 0 || old->suid == 0) && |
| (new->uid != 0 && new->euid != 0 && new->suid != 0) && |
| !issecure(SECURE_KEEP_CAPS)) { |
| cap_clear(new->cap_permitted); |
| cap_clear(new->cap_effective); |
| } |
| if (old->euid == 0 && new->euid != 0) |
| cap_clear(new->cap_effective); |
| if (old->euid != 0 && new->euid == 0) |
| new->cap_effective = new->cap_permitted; |
| } |
| |
| /** |
| * cap_task_fix_setuid - Fix up the results of setuid() call |
| * @new: The proposed credentials |
| * @old: The current task's current credentials |
| * @flags: Indications of what has changed |
| * |
| * Fix up the results of setuid() call before the credential changes are |
| * actually applied, returning 0 to grant the changes, -ve to deny them. |
| */ |
| int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags) |
| { |
| switch (flags) { |
| case LSM_SETID_RE: |
| case LSM_SETID_ID: |
| case LSM_SETID_RES: |
| /* juggle the capabilities to follow [RES]UID changes unless |
| * otherwise suppressed */ |
| if (!issecure(SECURE_NO_SETUID_FIXUP)) |
| cap_emulate_setxuid(new, old); |
| break; |
| |
| case LSM_SETID_FS: |
| /* juggle the capabilties to follow FSUID changes, unless |
| * otherwise suppressed |
| * |
| * FIXME - is fsuser used for all CAP_FS_MASK capabilities? |
| * if not, we might be a bit too harsh here. |
| */ |
| if (!issecure(SECURE_NO_SETUID_FIXUP)) { |
| if (old->fsuid == 0 && new->fsuid != 0) |
| new->cap_effective = |
| cap_drop_fs_set(new->cap_effective); |
| |
| if (old->fsuid != 0 && new->fsuid == 0) |
| new->cap_effective = |
| cap_raise_fs_set(new->cap_effective, |
| new->cap_permitted); |
| } |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Rationale: code calling task_setscheduler, task_setioprio, and |
| * task_setnice, assumes that |
| * . if capable(cap_sys_nice), then those actions should be allowed |
| * . if not capable(cap_sys_nice), but acting on your own processes, |
| * then those actions should be allowed |
| * This is insufficient now since you can call code without suid, but |
| * yet with increased caps. |
| * So we check for increased caps on the target process. |
| */ |
| static int cap_safe_nice(struct task_struct *p) |
| { |
| int is_subset; |
| |
| rcu_read_lock(); |
| is_subset = cap_issubset(__task_cred(p)->cap_permitted, |
| current_cred()->cap_permitted); |
| rcu_read_unlock(); |
| |
| if (!is_subset && !capable(CAP_SYS_NICE)) |
| return -EPERM; |
| return 0; |
| } |
| |
| /** |
| * cap_task_setscheduler - Detemine if scheduler policy change is permitted |
| * @p: The task to affect |
| * |
| * Detemine if the requested scheduler policy change is permitted for the |
| * specified task, returning 0 if permission is granted, -ve if denied. |
| */ |
| int cap_task_setscheduler(struct task_struct *p) |
| { |
| return cap_safe_nice(p); |
| } |
| |
| /** |
| * cap_task_ioprio - Detemine if I/O priority change is permitted |
| * @p: The task to affect |
| * @ioprio: The I/O priority to set |
| * |
| * Detemine if the requested I/O priority change is permitted for the specified |
| * task, returning 0 if permission is granted, -ve if denied. |
| */ |
| int cap_task_setioprio(struct task_struct *p, int ioprio) |
| { |
| return cap_safe_nice(p); |
| } |
| |
| /** |
| * cap_task_ioprio - Detemine if task priority change is permitted |
| * @p: The task to affect |
| * @nice: The nice value to set |
| * |
| * Detemine if the requested task priority change is permitted for the |
| * specified task, returning 0 if permission is granted, -ve if denied. |
| */ |
| int cap_task_setnice(struct task_struct *p, int nice) |
| { |
| return cap_safe_nice(p); |
| } |
| |
| /* |
| * Implement PR_CAPBSET_DROP. Attempt to remove the specified capability from |
| * the current task's bounding set. Returns 0 on success, -ve on error. |
| */ |
| static long cap_prctl_drop(struct cred *new, unsigned long cap) |
| { |
| if (!capable(CAP_SETPCAP)) |
| return -EPERM; |
| if (!cap_valid(cap)) |
| return -EINVAL; |
| |
| cap_lower(new->cap_bset, cap); |
| return 0; |
| } |
| |
| /** |
| * cap_task_prctl - Implement process control functions for this security module |
| * @option: The process control function requested |
| * @arg2, @arg3, @arg4, @arg5: The argument data for this function |
| * |
| * Allow process control functions (sys_prctl()) to alter capabilities; may |
| * also deny access to other functions not otherwise implemented here. |
| * |
| * Returns 0 or +ve on success, -ENOSYS if this function is not implemented |
| * here, other -ve on error. If -ENOSYS is returned, sys_prctl() and other LSM |
| * modules will consider performing the function. |
| */ |
| int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3, |
| unsigned long arg4, unsigned long arg5) |
| { |
| struct cred *new; |
| long error = 0; |
| |
| new = prepare_creds(); |
| if (!new) |
| return -ENOMEM; |
| |
| switch (option) { |
| case PR_CAPBSET_READ: |
| error = -EINVAL; |
| if (!cap_valid(arg2)) |
| goto error; |
| error = !!cap_raised(new->cap_bset, arg2); |
| goto no_change; |
| |
| case PR_CAPBSET_DROP: |
| error = cap_prctl_drop(new, arg2); |
| if (error < 0) |
| goto error; |
| goto changed; |
| |
| /* |
| * The next four prctl's remain to assist with transitioning a |
| * system from legacy UID=0 based privilege (when filesystem |
| * capabilities are not in use) to a system using filesystem |
| * capabilities only - as the POSIX.1e draft intended. |
| * |
| * Note: |
| * |
| * PR_SET_SECUREBITS = |
| * issecure_mask(SECURE_KEEP_CAPS_LOCKED) |
| * | issecure_mask(SECURE_NOROOT) |
| * | issecure_mask(SECURE_NOROOT_LOCKED) |
| * | issecure_mask(SECURE_NO_SETUID_FIXUP) |
| * | issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED) |
| * |
| * will ensure that the current process and all of its |
| * children will be locked into a pure |
| * capability-based-privilege environment. |
| */ |
| case PR_SET_SECUREBITS: |
| error = -EPERM; |
| if ((((new->securebits & SECURE_ALL_LOCKS) >> 1) |
| & (new->securebits ^ arg2)) /*[1]*/ |
| || ((new->securebits & SECURE_ALL_LOCKS & ~arg2)) /*[2]*/ |
| || (arg2 & ~(SECURE_ALL_LOCKS | SECURE_ALL_BITS)) /*[3]*/ |
| || (cap_capable(current, current_cred(), |
| current_cred()->user->user_ns, CAP_SETPCAP, |
| SECURITY_CAP_AUDIT) != 0) /*[4]*/ |
| /* |
| * [1] no changing of bits that are locked |
| * [2] no unlocking of locks |
| * [3] no setting of unsupported bits |
| * [4] doing anything requires privilege (go read about |
| * the "sendmail capabilities bug") |
| */ |
| ) |
| /* cannot change a locked bit */ |
| goto error; |
| new->securebits = arg2; |
| goto changed; |
| |
| case PR_GET_SECUREBITS: |
| error = new->securebits; |
| goto no_change; |
| |
| case PR_GET_KEEPCAPS: |
| if (issecure(SECURE_KEEP_CAPS)) |
| error = 1; |
| goto no_change; |
| |
| case PR_SET_KEEPCAPS: |
| error = -EINVAL; |
| if (arg2 > 1) /* Note, we rely on arg2 being unsigned here */ |
| goto error; |
| error = -EPERM; |
| if (issecure(SECURE_KEEP_CAPS_LOCKED)) |
| goto error; |
| if (arg2) |
| new->securebits |= issecure_mask(SECURE_KEEP_CAPS); |
| else |
| new->securebits &= ~issecure_mask(SECURE_KEEP_CAPS); |
| goto changed; |
| |
| default: |
| /* No functionality available - continue with default */ |
| error = -ENOSYS; |
| goto error; |
| } |
| |
| /* Functionality provided */ |
| changed: |
| return commit_creds(new); |
| |
| no_change: |
| error: |
| abort_creds(new); |
| return error; |
| } |
| |
| /** |
| * cap_vm_enough_memory - Determine whether a new virtual mapping is permitted |
| * @mm: The VM space in which the new mapping is to be made |
| * @pages: The size of the mapping |
| * |
| * Determine whether the allocation of a new virtual mapping by the current |
| * task is permitted, returning 0 if permission is granted, -ve if not. |
| */ |
| int cap_vm_enough_memory(struct mm_struct *mm, long pages) |
| { |
| int cap_sys_admin = 0; |
| |
| if (cap_capable(current, current_cred(), &init_user_ns, CAP_SYS_ADMIN, |
| SECURITY_CAP_NOAUDIT) == 0) |
| cap_sys_admin = 1; |
| return __vm_enough_memory(mm, pages, cap_sys_admin); |
| } |
| |
| /* |
| * cap_file_mmap - check if able to map given addr |
| * @file: unused |
| * @reqprot: unused |
| * @prot: unused |
| * @flags: unused |
| * @addr: address attempting to be mapped |
| * @addr_only: unused |
| * |
| * If the process is attempting to map memory below dac_mmap_min_addr they need |
| * CAP_SYS_RAWIO. The other parameters to this function are unused by the |
| * capability security module. Returns 0 if this mapping should be allowed |
| * -EPERM if not. |
| */ |
| int cap_file_mmap(struct file *file, unsigned long reqprot, |
| unsigned long prot, unsigned long flags, |
| unsigned long addr, unsigned long addr_only) |
| { |
| int ret = 0; |
| |
| if (addr < dac_mmap_min_addr) { |
| ret = cap_capable(current, current_cred(), &init_user_ns, CAP_SYS_RAWIO, |
| SECURITY_CAP_AUDIT); |
| /* set PF_SUPERPRIV if it turns out we allow the low mmap */ |
| if (ret == 0) |
| current->flags |= PF_SUPERPRIV; |
| } |
| return ret; |
| } |