| /* arch/arm/plat-s3c64xx/irq-eint.c |
| * |
| * Copyright 2008 Openmoko, Inc. |
| * Copyright 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * http://armlinux.simtec.co.uk/ |
| * |
| * S3C64XX - Interrupt handling for IRQ_EINT(x) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/sysdev.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| |
| #include <asm/hardware/vic.h> |
| |
| #include <plat/regs-irqtype.h> |
| #include <mach/regs-gpio.h> |
| #include <plat/gpio-cfg.h> |
| |
| #include <mach/map.h> |
| #include <plat/cpu.h> |
| #include <plat/pm.h> |
| |
| #define eint_offset(irq) ((irq) - IRQ_EINT(0)) |
| #define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq))) |
| |
| static inline void s3c_irq_eint_mask(struct irq_data *data) |
| { |
| u32 mask; |
| |
| mask = __raw_readl(S3C64XX_EINT0MASK); |
| mask |= (u32)data->chip_data; |
| __raw_writel(mask, S3C64XX_EINT0MASK); |
| } |
| |
| static void s3c_irq_eint_unmask(struct irq_data *data) |
| { |
| u32 mask; |
| |
| mask = __raw_readl(S3C64XX_EINT0MASK); |
| mask &= ~((u32)data->chip_data); |
| __raw_writel(mask, S3C64XX_EINT0MASK); |
| } |
| |
| static inline void s3c_irq_eint_ack(struct irq_data *data) |
| { |
| __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND); |
| } |
| |
| static void s3c_irq_eint_maskack(struct irq_data *data) |
| { |
| /* compiler should in-line these */ |
| s3c_irq_eint_mask(data); |
| s3c_irq_eint_ack(data); |
| } |
| |
| static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type) |
| { |
| int offs = eint_offset(data->irq); |
| int pin, pin_val; |
| int shift; |
| u32 ctrl, mask; |
| u32 newvalue = 0; |
| void __iomem *reg; |
| |
| if (offs > 27) |
| return -EINVAL; |
| |
| if (offs <= 15) |
| reg = S3C64XX_EINT0CON0; |
| else |
| reg = S3C64XX_EINT0CON1; |
| |
| switch (type) { |
| case IRQ_TYPE_NONE: |
| printk(KERN_WARNING "No edge setting!\n"); |
| break; |
| |
| case IRQ_TYPE_EDGE_RISING: |
| newvalue = S3C2410_EXTINT_RISEEDGE; |
| break; |
| |
| case IRQ_TYPE_EDGE_FALLING: |
| newvalue = S3C2410_EXTINT_FALLEDGE; |
| break; |
| |
| case IRQ_TYPE_EDGE_BOTH: |
| newvalue = S3C2410_EXTINT_BOTHEDGE; |
| break; |
| |
| case IRQ_TYPE_LEVEL_LOW: |
| newvalue = S3C2410_EXTINT_LOWLEV; |
| break; |
| |
| case IRQ_TYPE_LEVEL_HIGH: |
| newvalue = S3C2410_EXTINT_HILEV; |
| break; |
| |
| default: |
| printk(KERN_ERR "No such irq type %d", type); |
| return -1; |
| } |
| |
| if (offs <= 15) |
| shift = (offs / 2) * 4; |
| else |
| shift = ((offs - 16) / 2) * 4; |
| mask = 0x7 << shift; |
| |
| ctrl = __raw_readl(reg); |
| ctrl &= ~mask; |
| ctrl |= newvalue << shift; |
| __raw_writel(ctrl, reg); |
| |
| /* set the GPIO pin appropriately */ |
| |
| if (offs < 16) { |
| pin = S3C64XX_GPN(offs); |
| pin_val = S3C_GPIO_SFN(2); |
| } else if (offs < 23) { |
| pin = S3C64XX_GPL(offs + 8 - 16); |
| pin_val = S3C_GPIO_SFN(3); |
| } else { |
| pin = S3C64XX_GPM(offs - 23); |
| pin_val = S3C_GPIO_SFN(3); |
| } |
| |
| s3c_gpio_cfgpin(pin, pin_val); |
| |
| return 0; |
| } |
| |
| static struct irq_chip s3c_irq_eint = { |
| .name = "s3c-eint", |
| .irq_mask = s3c_irq_eint_mask, |
| .irq_unmask = s3c_irq_eint_unmask, |
| .irq_mask_ack = s3c_irq_eint_maskack, |
| .irq_ack = s3c_irq_eint_ack, |
| .irq_set_type = s3c_irq_eint_set_type, |
| .irq_set_wake = s3c_irqext_wake, |
| }; |
| |
| /* s3c_irq_demux_eint |
| * |
| * This function demuxes the IRQ from the group0 external interrupts, |
| * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into |
| * the specific handlers s3c_irq_demux_eintX_Y. |
| */ |
| static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) |
| { |
| u32 status = __raw_readl(S3C64XX_EINT0PEND); |
| u32 mask = __raw_readl(S3C64XX_EINT0MASK); |
| unsigned int irq; |
| |
| status &= ~mask; |
| status >>= start; |
| status &= (1 << (end - start + 1)) - 1; |
| |
| for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { |
| if (status & 1) |
| generic_handle_irq(irq); |
| |
| status >>= 1; |
| } |
| } |
| |
| static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) |
| { |
| s3c_irq_demux_eint(0, 3); |
| } |
| |
| static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) |
| { |
| s3c_irq_demux_eint(4, 11); |
| } |
| |
| static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc) |
| { |
| s3c_irq_demux_eint(12, 19); |
| } |
| |
| static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) |
| { |
| s3c_irq_demux_eint(20, 27); |
| } |
| |
| static int __init s3c64xx_init_irq_eint(void) |
| { |
| int irq; |
| |
| for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { |
| irq_set_chip(irq, &s3c_irq_eint); |
| irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); |
| irq_set_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); |
| irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); |
| irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); |
| irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); |
| |
| return 0; |
| } |
| |
| arch_initcall(s3c64xx_init_irq_eint); |