| /* |
| * linux/drivers/video/omap2/dss/dispc.c |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "DISPC" |
| |
| #include <linux/kernel.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/vmalloc.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/jiffies.h> |
| #include <linux/seq_file.h> |
| #include <linux/delay.h> |
| #include <linux/workqueue.h> |
| #include <linux/hardirq.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/ratelimit.h> |
| |
| #include <plat/sram.h> |
| #include <plat/clock.h> |
| #include <mach/tiler.h> |
| |
| #include <video/omapdss.h> |
| |
| #include "dss.h" |
| #include "dss_features.h" |
| #include "dispc.h" |
| |
| /* DISPC */ |
| #define DISPC_SZ_REGS SZ_4K |
| |
| #define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_OCP_ERR | \ |
| DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ |
| DISPC_IRQ_SYNC_LOST | \ |
| DISPC_IRQ_SYNC_LOST_DIGIT) |
| |
| #define DISPC_MAX_NR_ISRS 8 |
| |
| struct omap_dispc_isr_data { |
| omap_dispc_isr_t isr; |
| void *arg; |
| u32 mask; |
| }; |
| |
| struct dispc_hv_coef { |
| s8 hc0_vc00; |
| s8 hc1_vc0; |
| u8 hc2_vc1; |
| s8 hc3_vc2; |
| s8 hc4_vc22; |
| }; |
| |
| #define REG_GET(idx, start, end) \ |
| FLD_GET(dispc_read_reg(idx), start, end) |
| |
| #define REG_FLD_MOD(idx, val, start, end) \ |
| dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) |
| |
| struct dispc_irq_stats { |
| unsigned long last_reset; |
| unsigned irq_count; |
| unsigned irqs[32]; |
| }; |
| |
| static struct { |
| struct platform_device *pdev; |
| void __iomem *base; |
| |
| int ctx_loss_cnt; |
| struct mutex runtime_lock; |
| int runtime_count; |
| |
| int irq; |
| struct clk *dss_clk; |
| |
| u32 fifo_size[MAX_DSS_OVERLAYS]; |
| |
| u32 channel_irq[3]; /* Max channels hardcoded to 3*/ |
| |
| spinlock_t irq_lock; |
| u32 irq_error_mask; |
| struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; |
| u32 error_irqs; |
| struct work_struct error_work; |
| |
| bool ctx_valid; |
| u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spinlock_t irq_stats_lock; |
| struct dispc_irq_stats irq_stats; |
| #endif |
| } dispc; |
| |
| enum omap_color_component { |
| /* used for all color formats for OMAP3 and earlier |
| * and for RGB and Y color component on OMAP4 |
| */ |
| DISPC_COLOR_COMPONENT_RGB_Y = 1 << 0, |
| /* used for UV component for |
| * OMAP_DSS_COLOR_YUV2, OMAP_DSS_COLOR_UYVY, OMAP_DSS_COLOR_NV12 |
| * color formats on OMAP4 |
| */ |
| DISPC_COLOR_COMPONENT_UV = 1 << 1, |
| }; |
| |
| static void _omap_dispc_set_irqs(void); |
| |
| static inline void dispc_write_reg(const u16 idx, u32 val) |
| { |
| __raw_writel(val, dispc.base + idx); |
| } |
| |
| static inline u32 dispc_read_reg(const u16 idx) |
| { |
| return __raw_readl(dispc.base + idx); |
| } |
| |
| static int dispc_get_ctx_loss_count(void) |
| { |
| struct device *dev = &dispc.pdev->dev; |
| struct omap_display_platform_data *pdata = dev->platform_data; |
| struct omap_dss_board_info *board_data = pdata->board_data; |
| int cnt; |
| |
| if (!board_data->get_context_loss_count) |
| return -ENOENT; |
| |
| cnt = board_data->get_context_loss_count(dev); |
| |
| WARN_ONCE(cnt < 0, "get_context_loss_count failed: %d\n", cnt); |
| |
| return cnt; |
| } |
| |
| #define SR(reg) \ |
| dispc.ctx[DISPC_##reg / sizeof(u32)] = dispc_read_reg(DISPC_##reg) |
| #define RR(reg) \ |
| dispc_write_reg(DISPC_##reg, dispc.ctx[DISPC_##reg / sizeof(u32)]) |
| |
| static void dispc_save_context(void) |
| { |
| int i, o; |
| |
| DSSDBG("dispc_save_context\n"); |
| |
| SR(IRQENABLE); |
| SR(CONTROL); |
| SR(CONFIG); |
| SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| SR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| SR(TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| SR(LINE_NUMBER); |
| SR(TIMING_H(OMAP_DSS_CHANNEL_LCD)); |
| SR(TIMING_V(OMAP_DSS_CHANNEL_LCD)); |
| SR(POL_FREQ(OMAP_DSS_CHANNEL_LCD)); |
| SR(DIVISORo(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| SR(GLOBAL_ALPHA); |
| SR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT)); |
| SR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| SR(CONTROL2); |
| SR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| SR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| SR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD2)); |
| SR(TIMING_H(OMAP_DSS_CHANNEL_LCD2)); |
| SR(TIMING_V(OMAP_DSS_CHANNEL_LCD2)); |
| SR(POL_FREQ(OMAP_DSS_CHANNEL_LCD2)); |
| SR(DIVISORo(OMAP_DSS_CHANNEL_LCD2)); |
| SR(CONFIG2); |
| } |
| |
| SR(OVL_BA0(OMAP_DSS_GFX)); |
| SR(OVL_BA1(OMAP_DSS_GFX)); |
| SR(OVL_POSITION(OMAP_DSS_GFX)); |
| SR(OVL_SIZE(OMAP_DSS_GFX)); |
| SR(OVL_ATTRIBUTES(OMAP_DSS_GFX)); |
| SR(OVL_FIFO_THRESHOLD(OMAP_DSS_GFX)); |
| SR(OVL_ROW_INC(OMAP_DSS_GFX)); |
| SR(OVL_PIXEL_INC(OMAP_DSS_GFX)); |
| SR(OVL_WINDOW_SKIP(OMAP_DSS_GFX)); |
| SR(OVL_TABLE_BA(OMAP_DSS_GFX)); |
| |
| SR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD)); |
| SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD)); |
| SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD)); |
| |
| if (dss_has_feature(FEAT_CPR)) { |
| SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD)); |
| SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD)); |
| SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD)); |
| } |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| if (dss_has_feature(FEAT_CPR)) { |
| SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2)); |
| SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2)); |
| SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2)); |
| } |
| |
| SR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2)); |
| SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2)); |
| SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2)); |
| } |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| SR(OVL_PRELOAD(OMAP_DSS_GFX)); |
| |
| /* VID1-3 */ |
| for (o = OMAP_DSS_VIDEO1; o <= OMAP_DSS_VIDEO3; o++) { |
| if (o == OMAP_DSS_VIDEO3 && !dss_has_feature(FEAT_OVL_VID3)) |
| continue; |
| |
| SR(OVL_BA0(o)); |
| SR(OVL_BA1(o)); |
| SR(OVL_POSITION(o)); |
| SR(OVL_SIZE(o)); |
| SR(OVL_ATTRIBUTES(o)); |
| SR(OVL_FIFO_THRESHOLD(o)); |
| SR(OVL_ROW_INC(o)); |
| SR(OVL_PIXEL_INC(o)); |
| SR(OVL_FIR(o)); |
| SR(OVL_PICTURE_SIZE(o)); |
| SR(OVL_ACCU0(o)); |
| SR(OVL_ACCU1(o)); |
| |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_H(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_HV(o, i)); |
| |
| for (i = 0; i < 5; i++) |
| SR(OVL_CONV_COEF(o, i)); |
| |
| if (dss_has_feature(FEAT_FIR_COEF_V)) { |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_V(o, i)); |
| } |
| |
| if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) { |
| SR(OVL_BA0_UV(o)); |
| SR(OVL_BA1_UV(o)); |
| SR(OVL_FIR2(o)); |
| SR(OVL_ACCU2_0(o)); |
| SR(OVL_ACCU2_1(o)); |
| |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_H2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_HV2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| SR(OVL_FIR_COEF_V2(o, i)); |
| } |
| if (dss_has_feature(FEAT_ATTR2)) |
| SR(OVL_ATTRIBUTES2(o)); |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| SR(OVL_PRELOAD(o)); |
| } |
| |
| if (dss_has_feature(FEAT_CORE_CLK_DIV)) |
| SR(DIVISOR); |
| |
| dispc.ctx_loss_cnt = dispc_get_ctx_loss_count(); |
| dispc.ctx_valid = true; |
| |
| DSSDBG("context saved, ctx_loss_count %d\n", dispc.ctx_loss_cnt); |
| } |
| |
| static void dispc_restore_context(void) |
| { |
| int i, o, ctx; |
| |
| DSSDBG("dispc_restore_context\n"); |
| |
| if (!dispc.ctx_valid) |
| return; |
| |
| ctx = dispc_get_ctx_loss_count(); |
| |
| if (ctx >= 0 && ctx == dispc.ctx_loss_cnt) |
| return; |
| |
| DSSDBG("ctx_loss_count: saved %d, current %d\n", |
| dispc.ctx_loss_cnt, ctx); |
| |
| /*RR(IRQENABLE);*/ |
| /*RR(CONTROL);*/ |
| RR(CONFIG); |
| RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| RR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| RR(TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| RR(LINE_NUMBER); |
| RR(TIMING_H(OMAP_DSS_CHANNEL_LCD)); |
| RR(TIMING_V(OMAP_DSS_CHANNEL_LCD)); |
| RR(POL_FREQ(OMAP_DSS_CHANNEL_LCD)); |
| RR(DIVISORo(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| RR(GLOBAL_ALPHA); |
| RR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT)); |
| RR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| RR(DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| RR(TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| RR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD2)); |
| RR(TIMING_H(OMAP_DSS_CHANNEL_LCD2)); |
| RR(TIMING_V(OMAP_DSS_CHANNEL_LCD2)); |
| RR(POL_FREQ(OMAP_DSS_CHANNEL_LCD2)); |
| RR(DIVISORo(OMAP_DSS_CHANNEL_LCD2)); |
| RR(CONFIG2); |
| } |
| |
| RR(OVL_BA0(OMAP_DSS_GFX)); |
| RR(OVL_BA1(OMAP_DSS_GFX)); |
| RR(OVL_POSITION(OMAP_DSS_GFX)); |
| RR(OVL_SIZE(OMAP_DSS_GFX)); |
| RR(OVL_ATTRIBUTES(OMAP_DSS_GFX)); |
| RR(OVL_FIFO_THRESHOLD(OMAP_DSS_GFX)); |
| RR(OVL_ROW_INC(OMAP_DSS_GFX)); |
| RR(OVL_PIXEL_INC(OMAP_DSS_GFX)); |
| RR(OVL_WINDOW_SKIP(OMAP_DSS_GFX)); |
| RR(OVL_TABLE_BA(OMAP_DSS_GFX)); |
| |
| |
| RR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD)); |
| RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD)); |
| RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD)); |
| |
| if (dss_has_feature(FEAT_CPR)) { |
| RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD)); |
| RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD)); |
| RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD)); |
| } |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| RR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2)); |
| RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2)); |
| RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2)); |
| |
| if (dss_has_feature(FEAT_CPR)) { |
| RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2)); |
| RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2)); |
| RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2)); |
| } |
| } |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| RR(OVL_PRELOAD(OMAP_DSS_GFX)); |
| |
| |
| /* VID1-3 */ |
| for (o = OMAP_DSS_VIDEO1; o <= OMAP_DSS_VIDEO3; o++) { |
| if (o == OMAP_DSS_VIDEO3 && !dss_has_feature(FEAT_OVL_VID3)) |
| continue; |
| |
| RR(OVL_BA0(o)); |
| RR(OVL_BA1(o)); |
| RR(OVL_POSITION(o)); |
| RR(OVL_SIZE(o)); |
| RR(OVL_ATTRIBUTES(o)); |
| RR(OVL_FIFO_THRESHOLD(o)); |
| RR(OVL_ROW_INC(o)); |
| RR(OVL_PIXEL_INC(o)); |
| RR(OVL_FIR(o)); |
| RR(OVL_PICTURE_SIZE(o)); |
| RR(OVL_ACCU0(o)); |
| RR(OVL_ACCU1(o)); |
| |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_H(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_HV(o, i)); |
| |
| for (i = 0; i < 5; i++) |
| RR(OVL_CONV_COEF(o, i)); |
| |
| if (dss_has_feature(FEAT_FIR_COEF_V)) { |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_V(o, i)); |
| } |
| |
| if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) { |
| RR(OVL_BA0_UV(o)); |
| RR(OVL_BA1_UV(o)); |
| RR(OVL_FIR2(o)); |
| RR(OVL_ACCU2_0(o)); |
| RR(OVL_ACCU2_1(o)); |
| |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_H2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_HV2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| RR(OVL_FIR_COEF_V2(o, i)); |
| } |
| if (dss_has_feature(FEAT_ATTR2)) |
| RR(OVL_ATTRIBUTES2(o)); |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| RR(OVL_PRELOAD(o)); |
| } |
| |
| if (dss_has_feature(FEAT_CORE_CLK_DIV)) |
| RR(DIVISOR); |
| |
| /* enable last, because LCD & DIGIT enable are here */ |
| RR(CONTROL); |
| if (dss_has_feature(FEAT_MGR_LCD2)) |
| RR(CONTROL2); |
| /* clear spurious SYNC_LOST_DIGIT interrupts */ |
| dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); |
| |
| /* |
| * enable last so IRQs won't trigger before |
| * the context is fully restored |
| */ |
| RR(IRQENABLE); |
| |
| DSSDBG("context restored\n"); |
| } |
| |
| #undef SR |
| #undef RR |
| |
| static u32 dispc_calculate_threshold(enum omap_plane plane, u32 paddr, |
| u32 puv_addr, u16 width, u16 height, |
| s32 row_inc, s32 pix_inc) |
| { |
| int shift; |
| u32 channel_no = plane; |
| u32 val, burstsize, doublestride; |
| u32 rotation, bursttype, color_mode; |
| struct dispc_config dispc_reg_config; |
| |
| if (width >= 1920) |
| return 1500; |
| |
| /* Get the burst size */ |
| shift = (plane == OMAP_DSS_GFX) ? 6 : 14; |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| burstsize = FLD_GET(val, shift + 1, shift); |
| doublestride = FLD_GET(val, 22, 22); |
| rotation = FLD_GET(val, 13, 12); |
| bursttype = FLD_GET(val, 29, 29); |
| color_mode = FLD_GET(val, 4, 1); |
| |
| /* base address for frame (Luma frame in case of YUV420) */ |
| dispc_reg_config.ba = paddr; |
| /* base address for Chroma frame in case of YUV420 */ |
| dispc_reg_config.bacbcr = puv_addr; |
| /* OrgSizeX for frame */ |
| dispc_reg_config.sizex = width - 1; |
| /* OrgSizeY for frame */ |
| dispc_reg_config.sizey = height - 1; |
| /* burst size */ |
| dispc_reg_config.burstsize = burstsize; |
| /* pixel increment */ |
| dispc_reg_config.pixelinc = pix_inc; |
| /* row increment */ |
| dispc_reg_config.rowinc = row_inc; |
| /* burst type: 1D/2D */ |
| dispc_reg_config.bursttype = bursttype; |
| /* chroma DoubleStride when in YUV420 format */ |
| dispc_reg_config.doublestride = doublestride; |
| /* Pixcel format of the frame.*/ |
| dispc_reg_config.format = color_mode; |
| /* Rotation of frame */ |
| dispc_reg_config.rotation = rotation; |
| |
| /* DMA buffer allications - assuming reset values */ |
| dispc_reg_config.gfx_top_buffer = 0; |
| dispc_reg_config.gfx_bottom_buffer = 0; |
| dispc_reg_config.vid1_top_buffer = 1; |
| dispc_reg_config.vid1_bottom_buffer = 1; |
| dispc_reg_config.vid2_top_buffer = 2; |
| dispc_reg_config.vid2_bottom_buffer = 2; |
| dispc_reg_config.vid3_top_buffer = 3; |
| dispc_reg_config.vid3_bottom_buffer = 3; |
| dispc_reg_config.wb_top_buffer = 4; |
| dispc_reg_config.wb_bottom_buffer = 4; |
| |
| /* antiFlicker is off */ |
| dispc_reg_config.antiflicker = 0; |
| |
| return sa_calc_wrap(&dispc_reg_config, channel_no); |
| } |
| |
| int dispc_runtime_get(void) |
| { |
| int r; |
| |
| mutex_lock(&dispc.runtime_lock); |
| |
| if (dispc.runtime_count++ == 0) { |
| DSSDBG("dispc_runtime_get\n"); |
| |
| r = dss_runtime_get(); |
| if (r) |
| goto err_dss_get; |
| |
| /* XXX dispc fclk can also come from DSI PLL */ |
| clk_enable(dispc.dss_clk); |
| |
| r = pm_runtime_get_sync(&dispc.pdev->dev); |
| WARN_ON(r); |
| if (r < 0) |
| goto err_runtime_get; |
| |
| dispc_restore_context(); |
| } |
| |
| mutex_unlock(&dispc.runtime_lock); |
| |
| return 0; |
| |
| err_runtime_get: |
| clk_disable(dispc.dss_clk); |
| dss_runtime_put(); |
| err_dss_get: |
| mutex_unlock(&dispc.runtime_lock); |
| |
| return r; |
| } |
| |
| void dispc_runtime_put(void) |
| { |
| mutex_lock(&dispc.runtime_lock); |
| |
| if (--dispc.runtime_count == 0) { |
| int r; |
| |
| DSSDBG("dispc_runtime_put\n"); |
| |
| dispc_save_context(); |
| |
| r = pm_runtime_put_sync(&dispc.pdev->dev); |
| WARN_ON(r); |
| |
| clk_disable(dispc.dss_clk); |
| |
| dss_runtime_put(); |
| } |
| |
| mutex_unlock(&dispc.runtime_lock); |
| } |
| |
| |
| bool dispc_go_busy(enum omap_channel channel) |
| { |
| int bit; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD || |
| channel == OMAP_DSS_CHANNEL_LCD2) |
| bit = 5; /* GOLCD */ |
| else |
| bit = 6; /* GODIGIT */ |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| return REG_GET(DISPC_CONTROL2, bit, bit) == 1; |
| else |
| return REG_GET(DISPC_CONTROL, bit, bit) == 1; |
| } |
| |
| void dispc_go(enum omap_channel channel) |
| { |
| int bit; |
| bool enable_bit, go_bit; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD || |
| channel == OMAP_DSS_CHANNEL_LCD2) |
| bit = 0; /* LCDENABLE */ |
| else |
| bit = 1; /* DIGITALENABLE */ |
| |
| /* if the channel is not enabled, we don't need GO */ |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| enable_bit = REG_GET(DISPC_CONTROL2, bit, bit) == 1; |
| else |
| enable_bit = REG_GET(DISPC_CONTROL, bit, bit) == 1; |
| |
| if (!enable_bit) |
| return; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD || |
| channel == OMAP_DSS_CHANNEL_LCD2) |
| bit = 5; /* GOLCD */ |
| else |
| bit = 6; /* GODIGIT */ |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| go_bit = REG_GET(DISPC_CONTROL2, bit, bit) == 1; |
| else |
| go_bit = REG_GET(DISPC_CONTROL, bit, bit) == 1; |
| |
| if (go_bit) { |
| DSSERR("GO bit not down for channel %d\n", channel); |
| return; |
| } |
| |
| DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : |
| (channel == OMAP_DSS_CHANNEL_LCD2 ? "LCD2" : "DIGIT")); |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| REG_FLD_MOD(DISPC_CONTROL2, 1, bit, bit); |
| else |
| REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); |
| } |
| |
| static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value); |
| } |
| |
| static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| dispc_write_reg(DISPC_OVL_FIR_COEF_HV(plane, reg), value); |
| } |
| |
| static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| dispc_write_reg(DISPC_OVL_FIR_COEF_V(plane, reg), value); |
| } |
| |
| static void _dispc_write_firh2_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_OVL_FIR_COEF_H2(plane, reg), value); |
| } |
| |
| static void _dispc_write_firhv2_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_OVL_FIR_COEF_HV2(plane, reg), value); |
| } |
| |
| static void _dispc_write_firv2_reg(enum omap_plane plane, int reg, u32 value) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| dispc_write_reg(DISPC_OVL_FIR_COEF_V2(plane, reg), value); |
| } |
| |
| static const struct dispc_hv_coef * |
| dispc_get_scaling_coef(u32 inc, bool five_taps) |
| { |
| static const struct dispc_hv_coef coef3_M8[8] = { |
| { 0, 0, 128, 0, 0 }, |
| { 0, 2, 123, 3, 0 }, |
| { 0, 5, 111, 12, 0 }, |
| { 0, 7, 89, 32, 0 }, |
| { 0, 64, 64, 0, 0 }, |
| { 0, 32, 89, 7, 0 }, |
| { 0, 12, 111, 5, 0 }, |
| { 0, 3, 123, 2, 0 }, |
| }; |
| |
| static const struct dispc_hv_coef coef3_M16[8] = { |
| { 0, 36, 56, 36, 0 }, |
| { 0, 31, 57, 40, 0 }, |
| { 0, 27, 56, 45, 0 }, |
| { 0, 23, 55, 50, 0 }, |
| { 0, 55, 55, 18, 0 }, |
| { 0, 50, 55, 23, 0 }, |
| { 0, 45, 56, 27, 0 }, |
| { 0, 40, 57, 31, 0 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M8[8] = { |
| { 0, 0, 128, 0, 0 }, |
| { 0, -8, 124, 13, -1 }, |
| { -1, -11, 112, 30, -2 }, |
| { -2, -11, 95, 51, -5 }, |
| { -9, 73, 73, -9, 0 }, |
| { -5, 51, 95, -11, -2 }, |
| { -2, 30, 112, -11, -1 }, |
| { -1, 13, 124, -8, 0 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M9[8] = { |
| { 8, -8, 128, -8, 8 }, |
| { 14, -21, 126, 8, 1 }, |
| { 17, -27, 117, 30, -9 }, |
| { 17, -30, 103, 56, -18 }, |
| { -26, 83, 83, -26, 14 }, |
| { -18, 56, 103, -30, 17 }, |
| { -9, 30, 117, -27, 17 }, |
| { 1, 8, 126, -21, 14 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M10[8] = { |
| { -2, 2, 128, 2, -2 }, |
| { 5, -12, 125, 20, -10 }, |
| { 11, -22, 116, 41, -18 }, |
| { 15, -27, 102, 62, -24 }, |
| { -28, 83, 83, -28, 18 }, |
| { -24, 62, 102, -27, 15 }, |
| { -18, 41, 116, -22, 11 }, |
| { -10, 20, 125, -12, 5 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M11[8] = { |
| { -12, 12, 128, 12, -12 }, |
| { -4, -3, 124, 30, -19 }, |
| { 3, -15, 115, 49, -24 }, |
| { 9, -22, 101, 67, -27 }, |
| { -26, 83, 83, -26, 14 }, |
| { -27, 67, 101, -22, 9 }, |
| { -24, 49, 115, -15, 3 }, |
| { -19, 30, 124, -3, -4 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M12[8] = { |
| { -19, 21, 124, 21, -19 }, |
| { -12, 6, 120, 38, -24 }, |
| { -6, -7, 112, 55, -26 }, |
| { 1, -16, 98, 70, -25 }, |
| { -21, 82, 82, -21, 6 }, |
| { -25, 70, 98, -16, 1 }, |
| { -26, 55, 112, -7, -6 }, |
| { -24, 38, 120, 6, -12 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M13[8] = { |
| { -22, 27, 118, 27, -22 }, |
| { -18, 13, 115, 43, -25 }, |
| { -12, 0, 107, 58, -25 }, |
| { -6, -10, 95, 71, -22 }, |
| { -17, 81, 81, -17, 0 }, |
| { -22, 71, 95, -10, -6 }, |
| { -25, 58, 107, 0, -12 }, |
| { -25, 43, 115, 13, -18 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M14[8] = { |
| { -23, 32, 110, 32, -23 }, |
| { -20, 18, 108, 46, -24 }, |
| { -16, 6, 101, 59, -22 }, |
| { -11, -4, 91, 70, -18 }, |
| { -11, 78, 78, -11, -6 }, |
| { -18, 70, 91, -4, -11 }, |
| { -22, 59, 101, 6, -16 }, |
| { -24, 46, 108, 18, -20 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M16[8] = { |
| { -20, 37, 94, 37, -20 }, |
| { -21, 26, 93, 48, -18 }, |
| { -19, 15, 88, 58, -14 }, |
| { -17, 6, 82, 66, -9 }, |
| { -2, 73, 73, -2, -14 }, |
| { -9, 66, 82, 6, -17 }, |
| { -14, 58, 88, 15, -19 }, |
| { -18, 48, 93, 26, -21 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M19[8] = { |
| { -12, 38, 76, 38, -12 }, |
| { -14, 31, 72, 47, -8 }, |
| { -16, 22, 73, 53, -4 }, |
| { -16, 15, 69, 59, 1 }, |
| { 8, 64, 64, 8, -16 }, |
| { 1, 59, 69, 15, -16 }, |
| { -4, 53, 73, 22, -16 }, |
| { -9, 47, 72, 31, -13 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M22[8] = { |
| { -6, 37, 66, 37, -6 }, |
| { -8, 32, 61, 44, -1 }, |
| { -11, 25, 63, 48, 3 }, |
| { -13, 19, 61, 53, 8 }, |
| { 13, 58, 58, 13, -14 }, |
| { 8, 53, 61, 19, -13 }, |
| { 3, 48, 63, 25, -11 }, |
| { -2, 44, 61, 32, -7 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M26[8] = { |
| { 1, 36, 54, 36, 1 }, |
| { -2, 31, 55, 40, 4 }, |
| { -5, 27, 54, 44, 8 }, |
| { -8, 22, 53, 48, 13 }, |
| { 18, 51, 51, 18, -10 }, |
| { 13, 48, 53, 22, -8 }, |
| { 8, 44, 54, 27, -5 }, |
| { 4, 40, 55, 31, -2 }, |
| }; |
| |
| static const struct dispc_hv_coef coef_M32[8] = { |
| { 7, 34, 46, 34, 7 }, |
| { 4, 31, 46, 37, 10 }, |
| { 1, 27, 46, 39, 14 }, |
| { -1, 24, 46, 42, 17 }, |
| { 21, 45, 45, 21, -4 }, |
| { 17, 42, 46, 24, -1 }, |
| { 14, 39, 46, 28, 1 }, |
| { 10, 37, 46, 31, 4 }, |
| }; |
| |
| inc >>= 7; /* /= 128 */ |
| if (five_taps) { |
| if (inc > 26) |
| return coef_M32; |
| if (inc > 22) |
| return coef_M26; |
| if (inc > 19) |
| return coef_M22; |
| if (inc > 16) |
| return coef_M19; |
| if (inc > 14) |
| return coef_M16; |
| if (inc > 13) |
| return coef_M14; |
| if (inc > 12) |
| return coef_M13; |
| if (inc > 11) |
| return coef_M12; |
| if (inc > 10) |
| return coef_M11; |
| if (inc > 9) |
| return coef_M10; |
| if (inc > 8) |
| return coef_M9; |
| /* reduce blockiness when upscaling much */ |
| if (inc > 3) |
| return coef_M8; |
| if (inc > 2) |
| return coef_M11; |
| if (inc > 1) |
| return coef_M16; |
| return coef_M19; |
| } else { |
| if (inc > 14) |
| return coef3_M16; |
| /* reduce blockiness when upscaling much */ |
| if (inc > 3) |
| return coef3_M8; |
| return coef3_M16; |
| } |
| } |
| |
| static void _dispc_set_scale_coef(enum omap_plane plane, int hinc, |
| int vinc, bool five_taps, |
| enum omap_color_component color_comp) |
| { |
| const struct dispc_hv_coef *h_coef; |
| const struct dispc_hv_coef *v_coef; |
| int i; |
| |
| h_coef = dispc_get_scaling_coef(hinc, true); |
| v_coef = dispc_get_scaling_coef(vinc, five_taps); |
| |
| for (i = 0; i < 8; i++) { |
| u32 h, hv; |
| |
| h = FLD_VAL(h_coef[i].hc0_vc00, 7, 0) |
| | FLD_VAL(h_coef[i].hc1_vc0, 15, 8) |
| | FLD_VAL(h_coef[i].hc2_vc1, 23, 16) |
| | FLD_VAL(h_coef[i].hc3_vc2, 31, 24); |
| hv = FLD_VAL(h_coef[i].hc4_vc22, 7, 0) |
| | FLD_VAL(v_coef[i].hc1_vc0, 15, 8) |
| | FLD_VAL(v_coef[i].hc2_vc1, 23, 16) |
| | FLD_VAL(v_coef[i].hc3_vc2, 31, 24); |
| |
| if (color_comp == DISPC_COLOR_COMPONENT_RGB_Y) { |
| _dispc_write_firh_reg(plane, i, h); |
| _dispc_write_firhv_reg(plane, i, hv); |
| } else { |
| _dispc_write_firh2_reg(plane, i, h); |
| _dispc_write_firhv2_reg(plane, i, hv); |
| } |
| } |
| |
| if (five_taps) { |
| for (i = 0; i < 8; i++) { |
| u32 v; |
| v = FLD_VAL(v_coef[i].hc0_vc00, 7, 0) |
| | FLD_VAL(v_coef[i].hc4_vc22, 15, 8); |
| if (color_comp == DISPC_COLOR_COMPONENT_RGB_Y) |
| _dispc_write_firv_reg(plane, i, v); |
| else |
| _dispc_write_firv2_reg(plane, i, v); |
| } |
| } |
| } |
| |
| void _dispc_setup_color_conv_coef(enum omap_plane plane, |
| const struct omap_dss_cconv_coefs *ct) |
| { |
| BUG_ON(plane < OMAP_DSS_VIDEO1 || plane > OMAP_DSS_VIDEO3); |
| |
| #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) |
| |
| dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->rcr, ct->ry)); |
| dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->gy, ct->rcb)); |
| dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->gcb, ct->gcr)); |
| dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->bcr, ct->by)); |
| dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->bcb)); |
| |
| #undef CVAL |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), ct->full_range, 11, 11); |
| } |
| |
| |
| static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) |
| { |
| dispc_write_reg(DISPC_OVL_BA0(plane), paddr); |
| } |
| |
| static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) |
| { |
| dispc_write_reg(DISPC_OVL_BA1(plane), paddr); |
| } |
| |
| static void _dispc_set_plane_ba0_uv(enum omap_plane plane, u32 paddr) |
| { |
| dispc_write_reg(DISPC_OVL_BA0_UV(plane), paddr); |
| } |
| |
| static void _dispc_set_plane_ba1_uv(enum omap_plane plane, u32 paddr) |
| { |
| dispc_write_reg(DISPC_OVL_BA1_UV(plane), paddr); |
| } |
| |
| static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) |
| { |
| u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); |
| |
| dispc_write_reg(DISPC_OVL_POSITION(plane), val); |
| } |
| |
| static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) |
| { |
| u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| |
| if (plane == OMAP_DSS_GFX) |
| dispc_write_reg(DISPC_OVL_SIZE(plane), val); |
| else |
| dispc_write_reg(DISPC_OVL_PICTURE_SIZE(plane), val); |
| } |
| |
| static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) |
| { |
| u32 val; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| |
| dispc_write_reg(DISPC_OVL_SIZE(plane), val); |
| } |
| |
| static void _dispc_set_pre_mult_alpha(enum omap_plane plane, bool enable) |
| { |
| if (!dss_has_feature(FEAT_PRE_MULT_ALPHA)) |
| return; |
| |
| if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) && |
| plane == OMAP_DSS_VIDEO1) |
| return; |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 28, 28); |
| } |
| |
| static void _dispc_setup_global_alpha(enum omap_plane plane, u8 global_alpha) |
| { |
| if (!dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| return; |
| |
| if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) && |
| plane == OMAP_DSS_VIDEO1) |
| return; |
| |
| if (plane == OMAP_DSS_GFX) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 7, 0); |
| else if (plane == OMAP_DSS_VIDEO1) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 15, 8); |
| else if (plane == OMAP_DSS_VIDEO2) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 23, 16); |
| else if (plane == OMAP_DSS_VIDEO3) |
| REG_FLD_MOD(DISPC_GLOBAL_ALPHA, global_alpha, 31, 24); |
| } |
| |
| static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) |
| { |
| dispc_write_reg(DISPC_OVL_PIXEL_INC(plane), inc); |
| } |
| |
| static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) |
| { |
| dispc_write_reg(DISPC_OVL_ROW_INC(plane), inc); |
| } |
| |
| static void _dispc_set_color_mode(enum omap_plane plane, |
| enum omap_color_mode color_mode) |
| { |
| u32 m = 0; |
| if (plane != OMAP_DSS_GFX) { |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_NV12: |
| m = 0x0; break; |
| case OMAP_DSS_COLOR_RGBX16: |
| m = 0x1; break; |
| case OMAP_DSS_COLOR_RGBA16: |
| m = 0x2; break; |
| case OMAP_DSS_COLOR_RGB12U: |
| m = 0x4; break; |
| case OMAP_DSS_COLOR_ARGB16: |
| m = 0x5; break; |
| case OMAP_DSS_COLOR_RGB16: |
| m = 0x6; break; |
| case OMAP_DSS_COLOR_ARGB16_1555: |
| m = 0x7; break; |
| case OMAP_DSS_COLOR_RGB24U: |
| m = 0x8; break; |
| case OMAP_DSS_COLOR_RGB24P: |
| m = 0x9; break; |
| case OMAP_DSS_COLOR_YUV2: |
| m = 0xa; break; |
| case OMAP_DSS_COLOR_UYVY: |
| m = 0xb; break; |
| case OMAP_DSS_COLOR_ARGB32: |
| m = 0xc; break; |
| case OMAP_DSS_COLOR_RGBA32: |
| m = 0xd; break; |
| case OMAP_DSS_COLOR_RGBX32: |
| m = 0xe; break; |
| case OMAP_DSS_COLOR_XRGB16_1555: |
| m = 0xf; break; |
| default: |
| BUG(); break; |
| } |
| } else { |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| m = 0x0; break; |
| case OMAP_DSS_COLOR_CLUT2: |
| m = 0x1; break; |
| case OMAP_DSS_COLOR_CLUT4: |
| m = 0x2; break; |
| case OMAP_DSS_COLOR_CLUT8: |
| m = 0x3; break; |
| case OMAP_DSS_COLOR_RGB12U: |
| m = 0x4; break; |
| case OMAP_DSS_COLOR_ARGB16: |
| m = 0x5; break; |
| case OMAP_DSS_COLOR_RGB16: |
| m = 0x6; break; |
| case OMAP_DSS_COLOR_ARGB16_1555: |
| m = 0x7; break; |
| case OMAP_DSS_COLOR_RGB24U: |
| m = 0x8; break; |
| case OMAP_DSS_COLOR_RGB24P: |
| m = 0x9; break; |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_RGBX16: |
| m = 0xa; break; |
| case OMAP_DSS_COLOR_UYVY: |
| case OMAP_DSS_COLOR_RGBA16: |
| m = 0xb; break; |
| case OMAP_DSS_COLOR_ARGB32: |
| m = 0xc; break; |
| case OMAP_DSS_COLOR_RGBA32: |
| m = 0xd; break; |
| case OMAP_DSS_COLOR_RGBX32: |
| m = 0xe; break; |
| case OMAP_DSS_COLOR_XRGB16_1555: |
| m = 0xf; break; |
| default: |
| BUG(); break; |
| } |
| } |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1); |
| } |
| |
| void dispc_set_channel_out(enum omap_plane plane, |
| enum omap_channel channel) |
| { |
| int shift; |
| u32 val; |
| int chan = 0, chan2 = 0; |
| |
| switch (plane) { |
| case OMAP_DSS_GFX: |
| shift = 8; |
| break; |
| case OMAP_DSS_VIDEO1: |
| case OMAP_DSS_VIDEO2: |
| case OMAP_DSS_VIDEO3: |
| shift = 16; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| switch (channel) { |
| case OMAP_DSS_CHANNEL_LCD: |
| chan = 0; |
| chan2 = 0; |
| break; |
| case OMAP_DSS_CHANNEL_DIGIT: |
| chan = 1; |
| chan2 = 0; |
| break; |
| case OMAP_DSS_CHANNEL_LCD2: |
| chan = 0; |
| chan2 = 1; |
| break; |
| default: |
| BUG(); |
| } |
| |
| val = FLD_MOD(val, chan, shift, shift); |
| val = FLD_MOD(val, chan2, 31, 30); |
| } else { |
| val = FLD_MOD(val, channel, shift, shift); |
| } |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); |
| } |
| |
| void dispc_set_burst_size(enum omap_plane plane, |
| enum omap_burst_size burst_size) |
| { |
| int shift; |
| u32 val; |
| |
| switch (plane) { |
| case OMAP_DSS_GFX: |
| shift = 6; |
| break; |
| case OMAP_DSS_VIDEO1: |
| case OMAP_DSS_VIDEO2: |
| case OMAP_DSS_VIDEO3: |
| shift = 14; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| val = FLD_MOD(val, burst_size, shift+1, shift); |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); |
| } |
| |
| void dispc_enable_gamma_table(bool enable) |
| { |
| /* |
| * This is partially implemented to support only disabling of |
| * the gamma table. |
| */ |
| if (enable) { |
| DSSWARN("Gamma table enabling for TV not yet supported"); |
| return; |
| } |
| |
| REG_FLD_MOD(DISPC_CONFIG, enable, 9, 9); |
| } |
| |
| void dispc_enable_cpr(enum omap_channel channel, bool enable) |
| { |
| u16 reg; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD) |
| reg = DISPC_CONFIG; |
| else if (channel == OMAP_DSS_CHANNEL_LCD2) |
| reg = DISPC_CONFIG2; |
| else |
| return; |
| |
| REG_FLD_MOD(reg, enable, 15, 15); |
| } |
| |
| void dispc_set_cpr_coef(enum omap_channel channel, |
| struct omap_dss_cpr_coefs *coefs) |
| { |
| u32 coef_r, coef_g, coef_b; |
| |
| if (channel != OMAP_DSS_CHANNEL_LCD && channel != OMAP_DSS_CHANNEL_LCD2) |
| return; |
| |
| coef_r = FLD_VAL(coefs->rr, 31, 22) | FLD_VAL(coefs->rg, 20, 11) | |
| FLD_VAL(coefs->rb, 9, 0); |
| coef_g = FLD_VAL(coefs->gr, 31, 22) | FLD_VAL(coefs->gg, 20, 11) | |
| FLD_VAL(coefs->gb, 9, 0); |
| coef_b = FLD_VAL(coefs->br, 31, 22) | FLD_VAL(coefs->bg, 20, 11) | |
| FLD_VAL(coefs->bb, 9, 0); |
| |
| dispc_write_reg(DISPC_CPR_COEF_R(channel), coef_r); |
| dispc_write_reg(DISPC_CPR_COEF_G(channel), coef_g); |
| dispc_write_reg(DISPC_CPR_COEF_B(channel), coef_b); |
| } |
| |
| void dispc_set_zorder(enum omap_plane plane, |
| enum omap_overlay_zorder zorder) |
| { |
| u32 val; |
| |
| if (!dss_has_feature(FEAT_OVL_ZORDER)) |
| return; |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| val = FLD_MOD(val, zorder, 27, 26); |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); |
| } |
| |
| void dispc_enable_zorder(enum omap_plane plane, bool enable) |
| { |
| u32 val; |
| |
| if (!dss_has_feature(FEAT_OVL_ZORDER)) |
| return; |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| val = FLD_MOD(val, enable, 25, 25); |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); |
| } |
| |
| static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) |
| { |
| u32 val; |
| |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| val = FLD_MOD(val, enable, 9, 9); |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); |
| } |
| |
| void dispc_enable_replication(enum omap_plane plane, bool enable) |
| { |
| int bit; |
| |
| if (plane == OMAP_DSS_GFX) |
| bit = 5; |
| else |
| bit = 10; |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, bit, bit); |
| } |
| |
| void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height) |
| { |
| u32 val; |
| BUG_ON((width > (1 << 11)) || (height > (1 << 11))); |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| dispc_write_reg(DISPC_SIZE_MGR(channel), val); |
| } |
| |
| void dispc_set_digit_size(u16 width, u16 height) |
| { |
| u32 val; |
| BUG_ON((width > (1 << 11)) || (height > (1 << 11))); |
| val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); |
| dispc_write_reg(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT), val); |
| } |
| |
| static void dispc_read_plane_fifo_sizes(void) |
| { |
| u32 size; |
| int plane; |
| u8 start, end; |
| |
| dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end); |
| |
| for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) { |
| size = FLD_GET(dispc_read_reg(DISPC_OVL_FIFO_SIZE_STATUS(plane)), |
| start, end); |
| dispc.fifo_size[plane] = size; |
| } |
| } |
| |
| u32 dispc_get_plane_fifo_size(enum omap_plane plane) |
| { |
| return dispc.fifo_size[plane]; |
| } |
| |
| void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) |
| { |
| u8 hi_start, hi_end, lo_start, lo_end; |
| |
| dss_feat_get_reg_field(FEAT_REG_FIFOHIGHTHRESHOLD, &hi_start, &hi_end); |
| dss_feat_get_reg_field(FEAT_REG_FIFOLOWTHRESHOLD, &lo_start, &lo_end); |
| |
| DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n", |
| plane, |
| REG_GET(DISPC_OVL_FIFO_THRESHOLD(plane), |
| lo_start, lo_end), |
| REG_GET(DISPC_OVL_FIFO_THRESHOLD(plane), |
| hi_start, hi_end), |
| low, high); |
| |
| /* preload to high threshold to avoid FIFO underflow */ |
| dispc_write_reg(DISPC_OVL_PRELOAD(plane), min(high, 0xfffu)); |
| |
| dispc_write_reg(DISPC_OVL_FIFO_THRESHOLD(plane), |
| FLD_VAL(high, hi_start, hi_end) | |
| FLD_VAL(low, lo_start, lo_end)); |
| } |
| |
| void dispc_enable_fifomerge(bool enable) |
| { |
| DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); |
| REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); |
| } |
| |
| static void _dispc_set_fir(enum omap_plane plane, |
| int hinc, int vinc, |
| enum omap_color_component color_comp) |
| { |
| u32 val; |
| |
| if (color_comp == DISPC_COLOR_COMPONENT_RGB_Y) { |
| u8 hinc_start, hinc_end, vinc_start, vinc_end; |
| |
| dss_feat_get_reg_field(FEAT_REG_FIRHINC, |
| &hinc_start, &hinc_end); |
| dss_feat_get_reg_field(FEAT_REG_FIRVINC, |
| &vinc_start, &vinc_end); |
| val = FLD_VAL(vinc, vinc_start, vinc_end) | |
| FLD_VAL(hinc, hinc_start, hinc_end); |
| |
| dispc_write_reg(DISPC_OVL_FIR(plane), val); |
| } else { |
| val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); |
| dispc_write_reg(DISPC_OVL_FIR2(plane), val); |
| } |
| } |
| |
| static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| u8 hor_start, hor_end, vert_start, vert_end; |
| |
| dss_feat_get_reg_field(FEAT_REG_HORIZONTALACCU, &hor_start, &hor_end); |
| dss_feat_get_reg_field(FEAT_REG_VERTICALACCU, &vert_start, &vert_end); |
| |
| val = FLD_VAL(vaccu, vert_start, vert_end) | |
| FLD_VAL(haccu, hor_start, hor_end); |
| |
| dispc_write_reg(DISPC_OVL_ACCU0(plane), val); |
| } |
| |
| static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| u8 hor_start, hor_end, vert_start, vert_end; |
| |
| dss_feat_get_reg_field(FEAT_REG_HORIZONTALACCU, &hor_start, &hor_end); |
| dss_feat_get_reg_field(FEAT_REG_VERTICALACCU, &vert_start, &vert_end); |
| |
| val = FLD_VAL(vaccu, vert_start, vert_end) | |
| FLD_VAL(haccu, hor_start, hor_end); |
| |
| dispc_write_reg(DISPC_OVL_ACCU1(plane), val); |
| } |
| |
| static void _dispc_set_vid_accu2_0(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| |
| val = FLD_VAL(vaccu, 26, 16) | FLD_VAL(haccu, 10, 0); |
| dispc_write_reg(DISPC_OVL_ACCU2_0(plane), val); |
| } |
| |
| static void _dispc_set_vid_accu2_1(enum omap_plane plane, int haccu, int vaccu) |
| { |
| u32 val; |
| |
| val = FLD_VAL(vaccu, 26, 16) | FLD_VAL(haccu, 10, 0); |
| dispc_write_reg(DISPC_OVL_ACCU2_1(plane), val); |
| } |
| |
| static void _dispc_set_scale_param(enum omap_plane plane, |
| u16 orig_width, u16 orig_height, |
| u16 out_width, u16 out_height, |
| bool five_taps, u8 rotation, |
| enum omap_color_component color_comp) |
| { |
| int fir_hinc, fir_vinc; |
| int hscaleup, vscaleup; |
| |
| hscaleup = orig_width <= out_width; |
| vscaleup = orig_height <= out_height; |
| |
| _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps, color_comp); |
| |
| fir_hinc = 1024 * orig_width / out_width; |
| fir_vinc = 1024 * orig_height / out_height; |
| |
| _dispc_set_fir(plane, fir_hinc, fir_vinc, color_comp); |
| } |
| |
| static void _dispc_set_scaling_common(enum omap_plane plane, |
| u16 orig_width, u16 orig_height, |
| u16 out_width, u16 out_height, |
| bool ilace, bool five_taps, |
| bool fieldmode, enum omap_color_mode color_mode, |
| u8 rotation) |
| { |
| int accu0 = 0; |
| int accu1 = 0; |
| u32 l; |
| u16 y_adjust = color_mode == OMAP_DSS_COLOR_NV12 ? 2 : 0; |
| |
| _dispc_set_scale_param(plane, orig_width, orig_height - y_adjust, |
| out_width, out_height, five_taps, |
| rotation, DISPC_COLOR_COMPONENT_RGB_Y); |
| l = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); |
| |
| /* RESIZEENABLE and VERTICALTAPS */ |
| l &= ~((0x3 << 5) | (0x1 << 21)); |
| l |= (orig_width != out_width) ? (1 << 5) : 0; |
| l |= (orig_height != out_height) ? (1 << 6) : 0; |
| l |= five_taps ? (1 << 21) : 0; |
| |
| /* VRESIZECONF and HRESIZECONF */ |
| if (dss_has_feature(FEAT_RESIZECONF)) { |
| l &= ~(0x3 << 7); |
| l |= (orig_width <= out_width) ? 0 : (1 << 7); |
| l |= (orig_height <= out_height) ? 0 : (1 << 8); |
| } |
| |
| /* LINEBUFFERSPLIT */ |
| if (dss_has_feature(FEAT_LINEBUFFERSPLIT)) { |
| l &= ~(0x1 << 22); |
| l |= five_taps ? (1 << 22) : 0; |
| } |
| |
| dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), l); |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| if (ilace && !fieldmode) { |
| accu1 = 0; |
| accu0 = ((1024 * orig_height / out_height) / 2) & 0x3ff; |
| if (accu0 >= 1024/2) { |
| accu1 = 1024/2; |
| accu0 -= accu1; |
| } |
| } |
| |
| _dispc_set_vid_accu0(plane, 0, accu0); |
| _dispc_set_vid_accu1(plane, 0, accu1); |
| } |
| |
| static void _dispc_set_scaling_uv(enum omap_plane plane, |
| u16 orig_width, u16 orig_height, |
| u16 out_width, u16 out_height, |
| bool ilace, bool five_taps, |
| bool fieldmode, enum omap_color_mode color_mode, |
| u8 rotation) |
| { |
| int scale_x = out_width != orig_width; |
| int scale_y = out_height != orig_height; |
| u16 y_adjust = 0; |
| |
| if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) |
| return; |
| if ((color_mode != OMAP_DSS_COLOR_YUV2 && |
| color_mode != OMAP_DSS_COLOR_UYVY && |
| color_mode != OMAP_DSS_COLOR_NV12)) { |
| /* reset chroma resampling for RGB formats */ |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 8, 8); |
| return; |
| } |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_NV12: |
| /* UV is subsampled by 2 vertically*/ |
| orig_height >>= 1; |
| /* UV is subsampled by 2 horz.*/ |
| orig_width >>= 1; |
| y_adjust = 1; |
| break; |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| /*For YUV422 with 90/270 rotation, |
| *we don't upsample chroma |
| */ |
| if (rotation == OMAP_DSS_ROT_0 || |
| rotation == OMAP_DSS_ROT_180) |
| /* UV is subsampled by 2 hrz*/ |
| orig_width >>= 1; |
| /* must use FIR for YUV422 if rotated */ |
| if (rotation != OMAP_DSS_ROT_0) |
| scale_x = scale_y = true; |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (out_width != orig_width) |
| scale_x = true; |
| if (out_height != orig_height) |
| scale_y = true; |
| |
| _dispc_set_scale_param(plane, orig_width, orig_height - y_adjust, |
| out_width, out_height, five_taps, |
| rotation, DISPC_COLOR_COMPONENT_UV); |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), |
| (scale_x || scale_y) ? 1 : 0, 8, 8); |
| /* set H scaling */ |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_x ? 1 : 0, 5, 5); |
| /* set V scaling */ |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_y ? 1 : 0, 6, 6); |
| |
| _dispc_set_vid_accu2_0(plane, 0x80, 0); |
| _dispc_set_vid_accu2_1(plane, 0x80, 0); |
| } |
| |
| static void _dispc_set_scaling(enum omap_plane plane, |
| u16 orig_width, u16 orig_height, |
| u16 out_width, u16 out_height, |
| bool ilace, bool five_taps, |
| bool fieldmode, enum omap_color_mode color_mode, |
| u8 rotation) |
| { |
| BUG_ON(plane == OMAP_DSS_GFX); |
| |
| _dispc_set_scaling_common(plane, |
| orig_width, orig_height, |
| out_width, out_height, |
| ilace, five_taps, |
| fieldmode, color_mode, |
| rotation); |
| |
| _dispc_set_scaling_uv(plane, |
| orig_width, orig_height, |
| out_width, out_height, |
| ilace, five_taps, |
| fieldmode, color_mode, |
| rotation); |
| } |
| |
| static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, |
| bool mirroring, enum omap_color_mode color_mode, |
| enum omap_dss_rotation_type type) |
| { |
| bool row_repeat = false; |
| int vidrot = 0; |
| |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) { |
| |
| if (mirroring) { |
| switch (rotation) { |
| case OMAP_DSS_ROT_0: |
| vidrot = 2; |
| break; |
| case OMAP_DSS_ROT_90: |
| vidrot = 1; |
| break; |
| case OMAP_DSS_ROT_180: |
| vidrot = 0; |
| break; |
| case OMAP_DSS_ROT_270: |
| vidrot = 3; |
| break; |
| } |
| } else { |
| switch (rotation) { |
| case OMAP_DSS_ROT_0: |
| vidrot = 0; |
| break; |
| case OMAP_DSS_ROT_90: |
| vidrot = 1; |
| break; |
| case OMAP_DSS_ROT_180: |
| vidrot = 2; |
| break; |
| case OMAP_DSS_ROT_270: |
| vidrot = 3; |
| break; |
| } |
| } |
| |
| if (rotation == OMAP_DSS_ROT_90 || rotation == OMAP_DSS_ROT_270) |
| row_repeat = true; |
| else |
| row_repeat = false; |
| } |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), vidrot, 13, 12); |
| if (dss_has_feature(FEAT_ROWREPEATENABLE)) |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), |
| row_repeat ? 1 : 0, 18, 18); |
| |
| if (color_mode == OMAP_DSS_COLOR_NV12) { |
| /* this will never happen for GFX */ |
| /* 1D NV12 buffer is always non-rotated or vert. mirrored */ |
| bool doublestride = (rotation == OMAP_DSS_ROT_0 || |
| rotation == OMAP_DSS_ROT_180) && |
| type == OMAP_DSS_ROT_TILER; |
| /* DOUBLESTRIDE */ |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), doublestride, 22, 22); |
| } |
| } |
| |
| static int color_mode_to_bpp(enum omap_color_mode color_mode) |
| { |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| return 1; |
| case OMAP_DSS_COLOR_CLUT2: |
| return 2; |
| case OMAP_DSS_COLOR_CLUT4: |
| return 4; |
| case OMAP_DSS_COLOR_CLUT8: |
| case OMAP_DSS_COLOR_NV12: |
| return 8; |
| case OMAP_DSS_COLOR_RGB12U: |
| case OMAP_DSS_COLOR_RGB16: |
| case OMAP_DSS_COLOR_ARGB16: |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| case OMAP_DSS_COLOR_RGBA16: |
| case OMAP_DSS_COLOR_RGBX16: |
| case OMAP_DSS_COLOR_ARGB16_1555: |
| case OMAP_DSS_COLOR_XRGB16_1555: |
| return 16; |
| case OMAP_DSS_COLOR_RGB24P: |
| return 24; |
| case OMAP_DSS_COLOR_RGB24U: |
| case OMAP_DSS_COLOR_ARGB32: |
| case OMAP_DSS_COLOR_RGBA32: |
| case OMAP_DSS_COLOR_RGBX32: |
| return 32; |
| default: |
| BUG(); |
| } |
| } |
| |
| static s32 pixinc(int pixels, u8 ps) |
| { |
| if (pixels == 1) |
| return 1; |
| else if (pixels > 1) |
| return 1 + (pixels - 1) * ps; |
| else if (pixels < 0) |
| return 1 - (-pixels + 1) * ps; |
| else |
| BUG(); |
| } |
| |
| static void calc_tiler_row_rotation(struct tiler_view_t *view, |
| u16 width, int bpp, int y_decim, |
| s32 *row_inc, unsigned *offset1, bool ilace) |
| { |
| /* assume TB. We worry about swapping top/bottom outside of this call */ |
| |
| if (ilace) { |
| /* even and odd frames are interleaved */ |
| |
| /* offset1 is always at an odd line */ |
| *offset1 = view->v_inc * (y_decim | 1); |
| y_decim *= 2; |
| } |
| *row_inc = view->v_inc * y_decim + 1 - width * bpp; |
| |
| DSSDBG(" ps: %d/%d, width: %d/%d, offset1: %d," |
| " height: %d, row_inc:%d\n", view->bpp, bpp, |
| view->width, width, *offset1, view->height, *row_inc); |
| |
| return; |
| } |
| |
| static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, |
| u16 screen_width, |
| u16 width, u16 height, |
| enum omap_color_mode color_mode, bool fieldmode, |
| unsigned int field_offset, |
| unsigned *offset0, unsigned *offset1, |
| s32 *row_inc, s32 *pix_inc) |
| { |
| u8 ps; |
| |
| /* FIXME CLUT formats */ |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| case OMAP_DSS_COLOR_CLUT2: |
| case OMAP_DSS_COLOR_CLUT4: |
| case OMAP_DSS_COLOR_CLUT8: |
| BUG(); |
| return; |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| ps = 4; |
| break; |
| default: |
| ps = color_mode_to_bpp(color_mode) / 8; |
| break; |
| } |
| |
| DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, |
| width, height); |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| switch (rotation + mirror * 4) { |
| case OMAP_DSS_ROT_0: |
| case OMAP_DSS_ROT_180: |
| /* |
| * If the pixel format is YUV or UYVY divide the width |
| * of the image by 2 for 0 and 180 degree rotation. |
| */ |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) |
| width = width >> 1; |
| case OMAP_DSS_ROT_90: |
| case OMAP_DSS_ROT_270: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = field_offset * screen_width * ps; |
| else |
| *offset0 = 0; |
| |
| *row_inc = pixinc(1 + (screen_width - width) + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_0 + 4: |
| case OMAP_DSS_ROT_180 + 4: |
| /* If the pixel format is YUV or UYVY divide the width |
| * of the image by 2 for 0 degree and 180 degree |
| */ |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) |
| width = width >> 1; |
| case OMAP_DSS_ROT_90 + 4: |
| case OMAP_DSS_ROT_270 + 4: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = field_offset * screen_width * ps; |
| else |
| *offset0 = 0; |
| *row_inc = pixinc(1 - (screen_width + width) - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| default: |
| BUG(); |
| } |
| } |
| |
| static void calc_dma_rotation_offset(u8 rotation, bool mirror, |
| u16 screen_width, |
| u16 width, u16 height, |
| enum omap_color_mode color_mode, bool fieldmode, |
| unsigned int field_offset, |
| unsigned *offset0, unsigned *offset1, |
| s32 *row_inc, s32 *pix_inc, int x_decim, int y_decim) |
| { |
| u8 ps; |
| u16 fbw, fbh; |
| |
| /* FIXME CLUT formats */ |
| switch (color_mode) { |
| case OMAP_DSS_COLOR_CLUT1: |
| case OMAP_DSS_COLOR_CLUT2: |
| case OMAP_DSS_COLOR_CLUT4: |
| case OMAP_DSS_COLOR_CLUT8: |
| BUG(); |
| return; |
| case OMAP_DSS_COLOR_YUV2: |
| case OMAP_DSS_COLOR_UYVY: |
| if (cpu_is_omap44xx()) { |
| /* on OMAP4 YUYV is handled as 32-bit data */ |
| ps = 4; |
| screen_width /= 2; |
| break; |
| } |
| /* fall through */ |
| default: |
| ps = color_mode_to_bpp(color_mode) / 8; |
| break; |
| } |
| |
| DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, |
| width, height); |
| |
| /* width & height are overlay sizes, convert to fb sizes */ |
| |
| if (rotation == OMAP_DSS_ROT_0 || rotation == OMAP_DSS_ROT_180) { |
| fbw = width; |
| fbh = height; |
| } else { |
| fbw = height; |
| fbh = width; |
| } |
| |
| /* |
| * field 0 = even field = bottom field |
| * field 1 = odd field = top field |
| */ |
| switch (rotation + mirror * 4) { |
| case OMAP_DSS_ROT_0: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(1 + (y_decim * screen_width - fbw * x_decim) + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(x_decim, ps); |
| break; |
| case OMAP_DSS_ROT_90: |
| *offset1 = screen_width * (fbh - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * (fbh - 1) + 1 + |
| (fieldmode ? 1 : 0), ps); |
| *pix_inc = pixinc(-screen_width, ps); |
| break; |
| case OMAP_DSS_ROT_180: |
| *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-1 - |
| (screen_width - fbw) - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(-1, ps); |
| break; |
| case OMAP_DSS_ROT_270: |
| *offset1 = (fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - |
| (fieldmode ? 1 : 0), ps); |
| *pix_inc = pixinc(screen_width, ps); |
| break; |
| |
| /* mirroring */ |
| case OMAP_DSS_ROT_0 + 4: |
| *offset1 = (fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * 2 - 1 + |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(-1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_90 + 4: |
| *offset1 = 0; |
| if (field_offset) |
| *offset0 = *offset1 + field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + |
| (fieldmode ? 1 : 0), |
| ps); |
| *pix_inc = pixinc(screen_width, ps); |
| break; |
| |
| case OMAP_DSS_ROT_180 + 4: |
| *offset1 = screen_width * (fbh - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * screen_width * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(1 - screen_width * 2 - |
| (fieldmode ? screen_width : 0), |
| ps); |
| *pix_inc = pixinc(1, ps); |
| break; |
| |
| case OMAP_DSS_ROT_270 + 4: |
| *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; |
| if (field_offset) |
| *offset0 = *offset1 - field_offset * ps; |
| else |
| *offset0 = *offset1; |
| *row_inc = pixinc(screen_width * (fbh - 1) - 1 - |
| (fieldmode ? 1 : 0), |
| ps); |
| *pix_inc = pixinc(-screen_width, ps); |
| break; |
| |
| default: |
| BUG(); |
| } |
| } |
| |
| static unsigned long calc_fclk_five_taps(enum omap_channel channel, u16 width, |
| u16 height, u16 out_width, u16 out_height, |
| enum omap_color_mode color_mode) |
| { |
| u32 fclk = 0; |
| /* FIXME venc pclk? */ |
| u64 tmp, pclk = dispc_pclk_rate(channel); |
| |
| if (cpu_is_omap44xx()) { |
| /* do conservative TRM value on OMAP4 ES1.0 */ |
| if (omap_rev() == OMAP4430_REV_ES1_0) |
| return pclk * DIV_ROUND_UP(width, out_width) * |
| DIV_ROUND_UP(height, out_height); |
| |
| /* since 4430 ES2.0, fclk requirement only depends on width */ |
| pclk *= max(width, out_width); |
| do_div(pclk, out_width); |
| return pclk; |
| } |
| |
| if (height > out_height) { |
| /* FIXME get real display PPL */ |
| unsigned int ppl = 800; |
| |
| tmp = pclk * height * out_width; |
| do_div(tmp, 2 * out_height * ppl); |
| fclk = tmp; |
| |
| if (height > 2 * out_height) { |
| if (ppl == out_width) |
| return 0; |
| |
| tmp = pclk * (height - 2 * out_height) * out_width; |
| do_div(tmp, 2 * out_height * (ppl - out_width)); |
| fclk = max(fclk, (u32) tmp); |
| } |
| } |
| |
| if (width > out_width) { |
| tmp = pclk * width; |
| do_div(tmp, out_width); |
| fclk = max(fclk, (u32) tmp); |
| |
| if (color_mode == OMAP_DSS_COLOR_RGB24U) |
| fclk <<= 1; |
| } |
| |
| return fclk; |
| } |
| |
| static unsigned long calc_fclk(enum omap_channel channel, u16 width, |
| u16 height, u16 out_width, u16 out_height) |
| { |
| unsigned int hf, vf; |
| |
| /* on OMAP4 three-tap and five-tap clock requirements are the same */ |
| if (cpu_is_omap44xx()) |
| return calc_fclk_five_taps(channel, width, height, out_width, |
| out_height, 0); |
| |
| /* |
| * FIXME how to determine the 'A' factor |
| * for the no downscaling case ? |
| */ |
| |
| if (width > 3 * out_width) |
| hf = 4; |
| else if (width > 2 * out_width) |
| hf = 3; |
| else if (width > out_width) |
| hf = 2; |
| else |
| hf = 1; |
| |
| if (height > out_height) |
| vf = 2; |
| else |
| vf = 1; |
| |
| /* FIXME venc pclk? */ |
| return dispc_pclk_rate(channel) * vf * hf; |
| } |
| |
| int dispc_scaling_decision(u16 width, u16 height, |
| u16 out_width, u16 out_height, |
| enum omap_plane plane, |
| enum omap_color_mode color_mode, |
| enum omap_channel channel, u8 rotation, |
| enum omap_dss_rotation_type type, |
| u16 min_x_decim, u16 max_x_decim, |
| u16 min_y_decim, u16 max_y_decim, |
| u16 *x_decim, u16 *y_decim, bool *five_taps) |
| { |
| int maxdownscale = cpu_is_omap24xx() ? 2 : 4; |
| int bpp = color_mode_to_bpp(color_mode); |
| |
| /* |
| * For now only whole byte formats on OMAP4 can be predecimated. |
| * Later SDMA decimation support may be added |
| */ |
| bool can_decimate_x = cpu_is_omap44xx() && !(bpp & 7); |
| bool can_decimate_y = can_decimate_x; |
| |
| bool can_scale = plane != OMAP_DSS_GFX; |
| |
| u16 in_width, in_height; |
| unsigned long fclk = 0, fclk5 = 0; |
| int min_factor, max_factor; /* decimation search limits */ |
| int x, y; /* decimation search variables */ |
| unsigned long fclk_max = dispc_fclk_rate(); |
| u16 y_decim_limit = type == OMAP_DSS_ROT_TILER ? 2 : 16; |
| |
| /* No decimation for bitmap formats */ |
| if (color_mode == OMAP_DSS_COLOR_CLUT1 || |
| color_mode == OMAP_DSS_COLOR_CLUT2 || |
| color_mode == OMAP_DSS_COLOR_CLUT4 || |
| color_mode == OMAP_DSS_COLOR_CLUT8) { |
| *x_decim = 1; |
| *y_decim = 1; |
| *five_taps = false; |
| return 0; |
| } |
| |
| /* restrict search region based on whether we can decimate */ |
| if (!can_decimate_x) { |
| if (min_x_decim > 1) |
| return -EINVAL; |
| min_x_decim = max_x_decim = 1; |
| } else { |
| if (max_x_decim > 16) |
| max_x_decim = 16; |
| } |
| |
| if (!can_decimate_y) { |
| if (min_y_decim > 1) |
| return -EINVAL; |
| min_y_decim = max_y_decim = 1; |
| } else { |
| if (max_y_decim > y_decim_limit) |
| max_y_decim = y_decim_limit; |
| } |
| |
| /* |
| * Find best supported quality. In the search algorithm, we make use |
| * of the fact, that increased decimation in either direction will have |
| * lower quality. However, we do not differentiate horizontal and |
| * vertical decimation even though they may affect quality differently |
| * given the exact geometry involved. |
| * |
| * Also, since the clock calculations are abstracted, we cannot make |
| * assumptions on how decimation affects the clock rates in our search. |
| * |
| * We search the whole search region in increasing layers from |
| * min_factor to max_factor. In each layer we search in increasing |
| * factors alternating between x and y axis: |
| * |
| * x: 1 2 3 |
| * y: |
| * 1 1st | 3rd | 6th | |
| * ----+ | | |
| * 2 2nd 4th | 8th | |
| * ------------+ | |
| * 3 5th 7th 9th | |
| * --------------------+ |
| */ |
| min_factor = min(min_x_decim, min_y_decim); |
| max_factor = max(max_x_decim, max_y_decim); |
| x = min_x_decim; |
| y = min_y_decim; |
| while (1) { |
| if (x < min_x_decim || x > max_x_decim || |
| y < min_y_decim || y > max_y_decim) |
| goto loop; |
| |
| in_width = DIV_ROUND_UP(width, x); |
| in_height = DIV_ROUND_UP(height, y); |
| |
| if (in_width == out_width && in_height == out_height) |
| break; |
| |
| if (!can_scale) |
| goto loop; |
| |
| if (out_width < in_width / maxdownscale || |
| out_height < in_height / maxdownscale) |
| goto loop; |
| |
| /* Use 5-tap filter unless must use 3-tap */ |
| if (!cpu_is_omap44xx()) |
| *five_taps = in_width <= 1024; |
| else if (omap_rev() == OMAP4430_REV_ES1_0) |
| *five_taps = in_width <= 1280; |
| else |
| *five_taps = true; |
| |
| /* |
| * Predecimation on OMAP4 still fetches the whole lines |
| * :TODO: How does it affect the required clock speed? |
| */ |
| fclk = calc_fclk(channel, in_width, in_height, |
| out_width, out_height); |
| fclk5 = *five_taps ? |
| calc_fclk_five_taps(channel, in_width, in_height, |
| out_width, out_height, color_mode) : 0; |
| |
| DSSDBG("%d*%d,%d*%d->%d,%d requires %lu(3T), %lu(5T) Hz\n", |
| in_width, x, in_height, y, out_width, out_height, |
| fclk, fclk5); |
| |
| /* for now we always use 5-tap unless 3-tap is required */ |
| if (*five_taps) |
| fclk = fclk5; |
| |
| /* OMAP2/3 has a scaler size limitation */ |
| if (!cpu_is_omap44xx() && in_width > (1024 << !*five_taps)) |
| goto loop; |
| |
| DSSDBG("required fclk rate = %lu Hz\n", fclk); |
| DSSDBG("current fclk rate = %lu Hz\n", fclk_max); |
| |
| if (fclk > fclk_max) |
| goto loop; |
| break; |
| |
| loop: |
| /* err if exhausted search region */ |
| if (x == max_x_decim && y == max_y_decim) { |
| DSSERR("failed to set up scaling %u*%u to %u*%u, " |
| "required fclk rate = %lu Hz, " |
| "current = %lu Hz\n", |
| width, height, out_width, out_height, |
| fclk, fclk_max); |
| return -EINVAL; |
| } |
| |
| /* get to next factor */ |
| if (x == y) { |
| x = min_factor; |
| y++; |
| } else { |
| swap(x, y); |
| if (x < y) |
| x++; |
| } |
| } |
| |
| *x_decim = x; |
| *y_decim = y; |
| return 0; |
| } |
| |
| int dispc_setup_plane(enum omap_plane plane, |
| u32 paddr, u16 screen_width, |
| u16 pos_x, u16 pos_y, |
| u16 width, u16 height, |
| u16 out_width, u16 out_height, |
| enum omap_color_mode color_mode, |
| bool ilace, |
| int x_decim, int y_decim, bool five_taps, |
| enum omap_dss_rotation_type rotation_type, |
| u8 rotation, bool mirror, |
| u8 global_alpha, u8 pre_mult_alpha, |
| enum omap_channel channel, u32 puv_addr) |
| { |
| const int maxdownscale = cpu_is_omap24xx() ? 2 : 4; |
| bool fieldmode = 0; |
| int cconv = 0; |
| unsigned offset0, offset1; |
| s32 row_inc; |
| s32 pix_inc; |
| u16 frame_height = height; |
| unsigned int field_offset = 0; |
| int pixpg = (color_mode & |
| (OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY)) ? 2 : 1; |
| unsigned long tiler_width, tiler_height; |
| u32 fifo_high, fifo_low; |
| |
| DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %d/%dx%d/%d -> " |
| "%dx%d, ilace %d, cmode %x, rot %d, mir %d chan %d %dtap\n", |
| plane, paddr, screen_width, pos_x, pos_y, |
| width, x_decim, height, y_decim, |
| out_width, out_height, |
| ilace, color_mode, |
| rotation, mirror, channel, five_taps ? 5 : 3); |
| |
| if (paddr == 0) |
| return -EINVAL; |
| |
| if (ilace && height == out_height) |
| fieldmode = 1; |
| |
| if (ilace) { |
| if (fieldmode) |
| height /= 2; |
| pos_y /= 2; |
| out_height /= 2; |
| |
| DSSDBG("adjusting for ilace: height %d, pos_y %d, " |
| "out_height %d\n", |
| height, pos_y, out_height); |
| } |
| |
| if (!dss_feat_color_mode_supported(plane, color_mode)) |
| return -EINVAL; |
| |
| /* predecimate */ |
| |
| /* adjust for group-of-pixels*/ |
| if (rotation & 1) |
| height /= pixpg; |
| else |
| width /= pixpg; |
| |
| /* remember tiler block's size as we are reconstructing it */ |
| tiler_width = width; |
| tiler_height = height; |
| |
| width = DIV_ROUND_UP(width, x_decim); |
| height = DIV_ROUND_UP(height, y_decim); |
| |
| /* NV12 width has to be even (height apparently does not) */ |
| if (color_mode == OMAP_DSS_COLOR_NV12) |
| width &= ~1; |
| |
| if (plane == OMAP_DSS_GFX) { |
| if (width != out_width || height != out_height) |
| return -EINVAL; |
| } else { |
| /* video plane */ |
| |
| if (out_width < width / maxdownscale) |
| return -EINVAL; |
| |
| if (out_height < height / maxdownscale) |
| return -EINVAL; |
| |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY || |
| color_mode == OMAP_DSS_COLOR_NV12) |
| cconv = 1; |
| } |
| |
| if (ilace && !fieldmode) { |
| /* |
| * when downscaling the bottom field may have to start several |
| * source lines below the top field. Unfortunately ACCUI |
| * registers will only hold the fractional part of the offset |
| * so the integer part must be added to the base address of the |
| * bottom field. |
| */ |
| if (!height || height == out_height) |
| field_offset = 0; |
| else |
| field_offset = height / out_height / 2; |
| } |
| |
| /* Fields are independent but interleaved in memory. */ |
| if (fieldmode) |
| field_offset = 1; |
| |
| /* default values */ |
| row_inc = pix_inc = 0x1; |
| offset0 = offset1 = 0x0; |
| |
| /* |
| * :HACK: we piggy back on UV separate feature for TILER to avoid |
| * having to keep rebase our FEAT_ enum until they add TILER. |
| */ |
| if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) { |
| /* set BURSTTYPE */ |
| bool use_tiler = rotation_type == OMAP_DSS_ROT_TILER; |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), use_tiler, 29, 29); |
| } |
| |
| if (rotation_type == OMAP_DSS_ROT_TILER) { |
| struct tiler_view_t view = {0}; |
| int bpp = color_mode_to_bpp(color_mode) / 8; |
| /* tiler needs 0-degree width & height */ |
| if (rotation & 1) |
| swap(tiler_width, tiler_height); |
| |
| if (color_mode == OMAP_DSS_COLOR_YUV2 || |
| color_mode == OMAP_DSS_COLOR_UYVY) |
| tiler_width /= 2; |
| |
| tilview_create(&view, paddr, tiler_width, tiler_height); |
| tilview_rotate(&view, rotation * 90); |
| tilview_flip(&view, mirror, false); |
| paddr = view.tsptr; |
| |
| /* we cannot do TB field interlaced in rotated view */ |
| pix_inc = 1 + (x_decim - 1) * bpp * pixpg; |
| calc_tiler_row_rotation(&view, width * x_decim, bpp * pixpg, |
| y_decim, &row_inc, &offset1, ilace); |
| |
| DSSDBG("w, h = %ld %ld\n", tiler_width, tiler_height); |
| |
| if (puv_addr) { |
| tilview_create(&view, puv_addr, tiler_width / 2, |
| tiler_height / 2); |
| tilview_rotate(&view, rotation * 90); |
| tilview_flip(&view, mirror, false); |
| puv_addr = view.tsptr; |
| } |
| |
| } else if (rotation_type == OMAP_DSS_ROT_DMA) { |
| calc_dma_rotation_offset(rotation, mirror, |
| screen_width, width, frame_height, color_mode, |
| fieldmode, field_offset, |
| &offset0, &offset1, &row_inc, &pix_inc, |
| x_decim, y_decim); |
| } else { |
| calc_vrfb_rotation_offset(rotation, mirror, |
| screen_width, width, frame_height, color_mode, |
| fieldmode, field_offset, |
| &offset0, &offset1, &row_inc, &pix_inc); |
| } |
| |
| /* adjust back to pixels */ |
| if (rotation & 1) |
| height *= pixpg; |
| else |
| width *= pixpg; |
| DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", |
| offset0, offset1, row_inc, pix_inc); |
| |
| _dispc_set_color_mode(plane, color_mode); |
| |
| _dispc_set_plane_ba0(plane, paddr + offset0); |
| _dispc_set_plane_ba1(plane, paddr + offset1); |
| |
| if (OMAP_DSS_COLOR_NV12 == color_mode) { |
| _dispc_set_plane_ba0_uv(plane, puv_addr + offset0); |
| _dispc_set_plane_ba1_uv(plane, puv_addr + offset1); |
| } |
| |
| |
| _dispc_set_row_inc(plane, row_inc); |
| _dispc_set_pix_inc(plane, pix_inc); |
| |
| DSSDBG("%d,%d %d*%dx%d*%d -> %dx%d\n", pos_x, pos_y, width, x_decim, |
| height, y_decim, out_width, out_height); |
| |
| _dispc_set_plane_pos(plane, pos_x, pos_y); |
| |
| _dispc_set_pic_size(plane, width, height); |
| |
| if (plane != OMAP_DSS_GFX) { |
| _dispc_set_scaling(plane, width, height, |
| out_width, out_height, |
| ilace, five_taps, fieldmode, |
| color_mode, rotation); |
| _dispc_set_vid_size(plane, out_width, out_height); |
| _dispc_set_vid_color_conv(plane, cconv); |
| } |
| |
| _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode, |
| rotation_type); |
| |
| _dispc_set_pre_mult_alpha(plane, pre_mult_alpha); |
| _dispc_setup_global_alpha(plane, global_alpha); |
| |
| if (cpu_is_omap44xx()) { |
| fifo_low = dispc_calculate_threshold(plane, paddr + offset0, |
| puv_addr + offset0, width, height, |
| row_inc, pix_inc); |
| fifo_high = dispc_get_plane_fifo_size(plane) - 1; |
| dispc_setup_plane_fifo(plane, fifo_low, fifo_high); |
| } |
| |
| return 0; |
| } |
| |
| int dispc_enable_plane(enum omap_plane plane, bool enable) |
| { |
| DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); |
| |
| REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 0, 0); |
| |
| return 0; |
| } |
| |
| static void dispc_disable_isr(void *data, u32 mask) |
| { |
| struct completion *compl = data; |
| complete(compl); |
| } |
| |
| static void _enable_lcd_out(enum omap_channel channel, bool enable) |
| { |
| if (channel == OMAP_DSS_CHANNEL_LCD2) { |
| REG_FLD_MOD(DISPC_CONTROL2, enable ? 1 : 0, 0, 0); |
| /* flush posted write */ |
| dispc_read_reg(DISPC_CONTROL2); |
| } else { |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); |
| dispc_read_reg(DISPC_CONTROL); |
| } |
| } |
| |
| void omap_dispc_set_irq_type(int channel, enum omap_dispc_irq_type type) |
| { |
| if (type == OMAP_DISPC_IRQ_TYPE_VSYNC) { |
| dispc.channel_irq[channel] = channel == OMAP_DSS_CHANNEL_LCD2 ? |
| DISPC_IRQ_VSYNC2 : DISPC_IRQ_VSYNC; |
| } else { |
| dispc.channel_irq[channel] = channel == OMAP_DSS_CHANNEL_LCD2 ? |
| DISPC_IRQ_FRAMEDONE2 : DISPC_IRQ_FRAMEDONE; |
| } |
| } |
| |
| static void dispc_enable_lcd_out(enum omap_channel channel, bool enable) |
| { |
| struct completion frame_done_completion; |
| bool is_on; |
| int r; |
| u32 irq; |
| |
| /* When we disable LCD output, we need to wait until frame is done. |
| * Otherwise the DSS is still working, and turning off the clocks |
| * prevents DSS from going to OFF mode */ |
| is_on = channel == OMAP_DSS_CHANNEL_LCD2 ? |
| REG_GET(DISPC_CONTROL2, 0, 0) : |
| REG_GET(DISPC_CONTROL, 0, 0); |
| |
| irq = dispc.channel_irq[channel]; |
| |
| if (!enable && is_on) { |
| init_completion(&frame_done_completion); |
| |
| r = omap_dispc_register_isr(dispc_disable_isr, |
| &frame_done_completion, irq); |
| |
| if (r) |
| DSSERR("failed to register FRAMEDONE isr\n"); |
| } |
| |
| _enable_lcd_out(channel, enable); |
| |
| if (!enable && is_on) { |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for FRAME DONE\n"); |
| |
| r = omap_dispc_unregister_isr(dispc_disable_isr, |
| &frame_done_completion, irq); |
| |
| if (r) |
| DSSERR("failed to unregister FRAMEDONE isr\n"); |
| } |
| } |
| |
| static void _enable_digit_out(bool enable) |
| { |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); |
| /* flush posted write */ |
| dispc_read_reg(DISPC_CONTROL); |
| } |
| |
| static void dispc_enable_digit_out(enum omap_display_type type, bool enable) |
| { |
| struct completion frame_done_completion; |
| int r; |
| |
| if (REG_GET(DISPC_CONTROL, 1, 1) == enable) |
| return; |
| |
| if (enable) { |
| unsigned long flags; |
| /* When we enable digit output, we'll get an extra digit |
| * sync lost interrupt, that we need to ignore */ |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| /* When we disable digit output, we need to wait until fields are done. |
| * Otherwise the DSS is still working, and turning off the clocks |
| * prevents DSS from going to OFF mode. And when enabling, we need to |
| * wait for the extra sync losts */ |
| init_completion(&frame_done_completion); |
| |
| r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, |
| DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD |
| | DISPC_IRQ_FRAMEDONETV); |
| if (r) |
| DSSERR("failed to register EVSYNC isr\n"); |
| |
| _enable_digit_out(enable); |
| |
| /* XXX I understand from TRM that we should only wait for the |
| * current field to complete. But it seems we have to wait |
| * for both fields */ |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for EVSYNC\n"); |
| |
| /* Don't wait for the odd field in the case of HDMI */ |
| if (type != OMAP_DISPLAY_TYPE_HDMI) { |
| if (!wait_for_completion_timeout(&frame_done_completion, |
| msecs_to_jiffies(100))) |
| DSSERR("timeout waiting for EVSYNC\n"); |
| } |
| |
| r = omap_dispc_unregister_isr(dispc_disable_isr, |
| &frame_done_completion, |
| DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD |
| | DISPC_IRQ_FRAMEDONETV); |
| if (r) |
| DSSERR("failed to unregister EVSYNC isr\n"); |
| |
| if (enable) { |
| unsigned long flags; |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; |
| if (dss_has_feature(FEAT_MGR_LCD2)) |
| dispc.irq_error_mask |= DISPC_IRQ_SYNC_LOST2; |
| if (dss_has_feature(FEAT_OVL_VID3)) |
| dispc.irq_error_mask |= DISPC_IRQ_VID3_FIFO_UNDERFLOW; |
| dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| } |
| |
| bool dispc_is_channel_enabled(enum omap_channel channel) |
| { |
| if (channel == OMAP_DSS_CHANNEL_LCD) |
| return !!REG_GET(DISPC_CONTROL, 0, 0); |
| else if (channel == OMAP_DSS_CHANNEL_DIGIT) |
| return !!REG_GET(DISPC_CONTROL, 1, 1); |
| else if (channel == OMAP_DSS_CHANNEL_LCD2) |
| return !!REG_GET(DISPC_CONTROL2, 0, 0); |
| else |
| BUG(); |
| } |
| |
| void dispc_enable_channel(enum omap_channel channel, |
| enum omap_display_type type, bool enable) |
| { |
| if (channel == OMAP_DSS_CHANNEL_LCD || |
| channel == OMAP_DSS_CHANNEL_LCD2) |
| dispc_enable_lcd_out(channel, enable); |
| else if (channel == OMAP_DSS_CHANNEL_DIGIT) |
| dispc_enable_digit_out(type, enable); |
| else |
| BUG(); |
| } |
| |
| void dispc_lcd_enable_signal_polarity(bool act_high) |
| { |
| if (!dss_has_feature(FEAT_LCDENABLEPOL)) |
| return; |
| |
| REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); |
| } |
| |
| void dispc_lcd_enable_signal(bool enable) |
| { |
| if (!dss_has_feature(FEAT_LCDENABLESIGNAL)) |
| return; |
| |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); |
| } |
| |
| void dispc_pck_free_enable(bool enable) |
| { |
| if (!dss_has_feature(FEAT_PCKFREEENABLE)) |
| return; |
| |
| REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); |
| } |
| |
| void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable) |
| { |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| REG_FLD_MOD(DISPC_CONFIG2, enable ? 1 : 0, 16, 16); |
| else |
| REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); |
| } |
| |
| |
| void dispc_set_lcd_display_type(enum omap_channel channel, |
| enum omap_lcd_display_type type) |
| { |
| int mode; |
| |
| switch (type) { |
| case OMAP_DSS_LCD_DISPLAY_STN: |
| mode = 0; |
| break; |
| |
| case OMAP_DSS_LCD_DISPLAY_TFT: |
| mode = 1; |
| break; |
| |
| default: |
| BUG(); |
| return; |
| } |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| REG_FLD_MOD(DISPC_CONTROL2, mode, 3, 3); |
| else |
| REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); |
| } |
| |
| void dispc_set_loadmode(enum omap_dss_load_mode mode) |
| { |
| REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); |
| } |
| |
| |
| void dispc_set_default_color(enum omap_channel channel, u32 color) |
| { |
| dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color); |
| } |
| |
| u32 dispc_get_default_color(enum omap_channel channel) |
| { |
| u32 l; |
| |
| BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && |
| channel != OMAP_DSS_CHANNEL_LCD && |
| channel != OMAP_DSS_CHANNEL_LCD2); |
| |
| l = dispc_read_reg(DISPC_DEFAULT_COLOR(channel)); |
| |
| return l; |
| } |
| |
| void dispc_set_trans_key(enum omap_channel ch, |
| enum omap_dss_trans_key_type type, |
| u32 trans_key) |
| { |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); |
| else /* OMAP_DSS_CHANNEL_LCD2 */ |
| REG_FLD_MOD(DISPC_CONFIG2, type, 11, 11); |
| |
| dispc_write_reg(DISPC_TRANS_COLOR(ch), trans_key); |
| } |
| |
| void dispc_get_trans_key(enum omap_channel ch, |
| enum omap_dss_trans_key_type *type, |
| u32 *trans_key) |
| { |
| if (type) { |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| *type = REG_GET(DISPC_CONFIG, 11, 11); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| *type = REG_GET(DISPC_CONFIG, 13, 13); |
| else if (ch == OMAP_DSS_CHANNEL_LCD2) |
| *type = REG_GET(DISPC_CONFIG2, 11, 11); |
| else |
| BUG(); |
| } |
| |
| if (trans_key) |
| *trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch)); |
| } |
| |
| void dispc_enable_trans_key(enum omap_channel ch, bool enable) |
| { |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); |
| else /* OMAP_DSS_CHANNEL_LCD2 */ |
| REG_FLD_MOD(DISPC_CONFIG2, enable, 10, 10); |
| } |
| void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) |
| { |
| if (!dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| return; |
| |
| /* :NOTE: compatibility mode is not supported on LCD2 */ |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); |
| } |
| bool dispc_alpha_blending_enabled(enum omap_channel ch) |
| { |
| bool enabled; |
| |
| if (!dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| return false; |
| |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| enabled = REG_GET(DISPC_CONFIG, 18, 18); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| enabled = REG_GET(DISPC_CONFIG, 19, 19); |
| else if (ch == OMAP_DSS_CHANNEL_LCD2) |
| enabled = false; |
| else |
| BUG(); |
| |
| return enabled; |
| } |
| |
| |
| bool dispc_trans_key_enabled(enum omap_channel ch) |
| { |
| bool enabled; |
| |
| if (ch == OMAP_DSS_CHANNEL_LCD) |
| enabled = REG_GET(DISPC_CONFIG, 10, 10); |
| else if (ch == OMAP_DSS_CHANNEL_DIGIT) |
| enabled = REG_GET(DISPC_CONFIG, 12, 12); |
| else if (ch == OMAP_DSS_CHANNEL_LCD2) |
| enabled = REG_GET(DISPC_CONFIG2, 10, 10); |
| else |
| BUG(); |
| |
| return enabled; |
| } |
| |
| |
| void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines) |
| { |
| int code; |
| |
| switch (data_lines) { |
| case 12: |
| code = 0; |
| break; |
| case 16: |
| code = 1; |
| break; |
| case 18: |
| code = 2; |
| break; |
| case 24: |
| code = 3; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) |
| REG_FLD_MOD(DISPC_CONTROL2, code, 9, 8); |
| else |
| REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); |
| } |
| |
| void dispc_set_parallel_interface_mode(enum omap_channel channel, |
| enum omap_parallel_interface_mode mode) |
| { |
| u32 l; |
| int stallmode; |
| int gpout0 = 1; |
| int gpout1; |
| |
| switch (mode) { |
| case OMAP_DSS_PARALLELMODE_BYPASS: |
| stallmode = 0; |
| gpout1 = 1; |
| break; |
| |
| case OMAP_DSS_PARALLELMODE_RFBI: |
| stallmode = 1; |
| gpout1 = 0; |
| break; |
| |
| case OMAP_DSS_PARALLELMODE_DSI: |
| stallmode = 1; |
| gpout1 = 1; |
| break; |
| |
| default: |
| BUG(); |
| return; |
| } |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD2) { |
| l = dispc_read_reg(DISPC_CONTROL2); |
| l = FLD_MOD(l, stallmode, 11, 11); |
| dispc_write_reg(DISPC_CONTROL2, l); |
| } else { |
| l = dispc_read_reg(DISPC_CONTROL); |
| l = FLD_MOD(l, stallmode, 11, 11); |
| l = FLD_MOD(l, gpout0, 15, 15); |
| l = FLD_MOD(l, gpout1, 16, 16); |
| dispc_write_reg(DISPC_CONTROL, l); |
| } |
| } |
| |
| static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp, |
| int vsw, int vfp, int vbp) |
| { |
| if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { |
| if (hsw < 1 || hsw > 64 || |
| hfp < 1 || hfp > 256 || |
| hbp < 1 || hbp > 256 || |
| vsw < 1 || vsw > 64 || |
| vfp < 0 || vfp > 255 || |
| vbp < 0 || vbp > 255) |
| return false; |
| } else { |
| if (hsw < 1 || hsw > 256 || |
| hfp < 1 || hfp > 4096 || |
| hbp < 1 || hbp > 4096 || |
| vsw < 1 || vsw > 256 || |
| vfp < 0 || vfp > 4095 || |
| vbp < 0 || vbp > 4095) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool dispc_lcd_timings_ok(struct omap_video_timings *timings) |
| { |
| return _dispc_lcd_timings_ok(timings->hsw, timings->hfp, |
| timings->hbp, timings->vsw, |
| timings->vfp, timings->vbp); |
| } |
| |
| static void _dispc_set_lcd_timings(enum omap_channel channel, int hsw, |
| int hfp, int hbp, int vsw, int vfp, int vbp) |
| { |
| u32 timing_h, timing_v; |
| |
| if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { |
| timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | |
| FLD_VAL(hbp-1, 27, 20); |
| |
| timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | |
| FLD_VAL(vbp, 27, 20); |
| } else { |
| timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | |
| FLD_VAL(hbp-1, 31, 20); |
| |
| timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | |
| FLD_VAL(vbp, 31, 20); |
| } |
| |
| dispc_write_reg(DISPC_TIMING_H(channel), timing_h); |
| dispc_write_reg(DISPC_TIMING_V(channel), timing_v); |
| } |
| |
| /* change name to mode? */ |
| void dispc_set_lcd_timings(enum omap_channel channel, |
| struct omap_video_timings *timings) |
| { |
| unsigned xtot, ytot; |
| unsigned long ht, vt; |
| |
| if (!_dispc_lcd_timings_ok(timings->hsw, timings->hfp, |
| timings->hbp, timings->vsw, |
| timings->vfp, timings->vbp)) |
| BUG(); |
| |
| _dispc_set_lcd_timings(channel, timings->hsw, timings->hfp, |
| timings->hbp, timings->vsw, timings->vfp, |
| timings->vbp); |
| |
| dispc_set_lcd_size(channel, timings->x_res, timings->y_res); |
| |
| xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; |
| ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; |
| |
| ht = (timings->pixel_clock * 1000) / xtot; |
| vt = (timings->pixel_clock * 1000) / xtot / ytot; |
| |
| DSSDBG("channel %d xres %u yres %u\n", channel, timings->x_res, |
| timings->y_res); |
| DSSDBG("pck %u\n", timings->pixel_clock); |
| DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", |
| timings->hsw, timings->hfp, timings->hbp, |
| timings->vsw, timings->vfp, timings->vbp); |
| |
| DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); |
| } |
| |
| static void dispc_set_lcd_divisor(enum omap_channel channel, u16 lck_div, |
| u16 pck_div) |
| { |
| BUG_ON(lck_div < 1); |
| BUG_ON(pck_div < 2); |
| |
| dispc_write_reg(DISPC_DIVISORo(channel), |
| FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); |
| } |
| |
| static void dispc_get_lcd_divisor(enum omap_channel channel, int *lck_div, |
| int *pck_div) |
| { |
| u32 l; |
| l = dispc_read_reg(DISPC_DIVISORo(channel)); |
| *lck_div = FLD_GET(l, 23, 16); |
| *pck_div = FLD_GET(l, 7, 0); |
| } |
| |
| unsigned long dispc_fclk_rate(void) |
| { |
| struct platform_device *dsidev; |
| unsigned long r = 0; |
| |
| switch (dss_get_dispc_clk_source()) { |
| case OMAP_DSS_CLK_SRC_FCK: |
| r = clk_get_rate(dispc.dss_clk); |
| break; |
| case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC: |
| dsidev = dsi_get_dsidev_from_id(0); |
| r = dsi_get_pll_hsdiv_dispc_rate(dsidev); |
| break; |
| case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC: |
| dsidev = dsi_get_dsidev_from_id(1); |
| r = dsi_get_pll_hsdiv_dispc_rate(dsidev); |
| break; |
| default: |
| BUG(); |
| } |
| |
| return r; |
| } |
| |
| unsigned long dispc_lclk_rate(enum omap_channel channel) |
| { |
| struct platform_device *dsidev; |
| int lcd; |
| unsigned long r; |
| u32 l; |
| |
| l = dispc_read_reg(DISPC_DIVISORo(channel)); |
| |
| lcd = FLD_GET(l, 23, 16); |
| |
| switch (dss_get_lcd_clk_source(channel)) { |
| case OMAP_DSS_CLK_SRC_FCK: |
| r = clk_get_rate(dispc.dss_clk); |
| break; |
| case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC: |
| dsidev = dsi_get_dsidev_from_id(0); |
| r = dsi_get_pll_hsdiv_dispc_rate(dsidev); |
| break; |
| case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC: |
| dsidev = dsi_get_dsidev_from_id(1); |
| r = dsi_get_pll_hsdiv_dispc_rate(dsidev); |
| break; |
| default: |
| BUG(); |
| } |
| |
| return r / lcd; |
| } |
| |
| unsigned long dispc_pclk_rate(enum omap_channel channel) |
| { |
| int pcd; |
| unsigned long r; |
| u32 l; |
| |
| if (channel == OMAP_DSS_CHANNEL_LCD || |
| channel == OMAP_DSS_CHANNEL_LCD2) { |
| l = dispc_read_reg(DISPC_DIVISORo(channel)); |
| |
| pcd = FLD_GET(l, 7, 0); |
| |
| r = dispc_lclk_rate(channel); |
| |
| return r / pcd; |
| } else { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(channel); |
| if (!mgr || !mgr->device) |
| return 0; |
| |
| return mgr->device->panel.timings.pixel_clock * 1000; |
| } |
| } |
| |
| void dispc_dump_clocks(struct seq_file *s) |
| { |
| int lcd, pcd; |
| u32 l; |
| enum omap_dss_clk_source dispc_clk_src = dss_get_dispc_clk_source(); |
| enum omap_dss_clk_source lcd_clk_src; |
| |
| if (dispc_runtime_get()) |
| return; |
| |
| seq_printf(s, "- DISPC -\n"); |
| |
| seq_printf(s, "dispc fclk source = %s (%s)\n", |
| dss_get_generic_clk_source_name(dispc_clk_src), |
| dss_feat_get_clk_source_name(dispc_clk_src)); |
| |
| seq_printf(s, "fck\t\t%-16lu\n", dispc_fclk_rate()); |
| |
| if (dss_has_feature(FEAT_CORE_CLK_DIV)) { |
| seq_printf(s, "- DISPC-CORE-CLK -\n"); |
| l = dispc_read_reg(DISPC_DIVISOR); |
| lcd = FLD_GET(l, 23, 16); |
| |
| seq_printf(s, "lck\t\t%-16lulck div\t%u\n", |
| (dispc_fclk_rate()/lcd), lcd); |
| } |
| seq_printf(s, "- LCD1 -\n"); |
| |
| lcd_clk_src = dss_get_lcd_clk_source(OMAP_DSS_CHANNEL_LCD); |
| |
| seq_printf(s, "lcd1_clk source = %s (%s)\n", |
| dss_get_generic_clk_source_name(lcd_clk_src), |
| dss_feat_get_clk_source_name(lcd_clk_src)); |
| |
| dispc_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD, &lcd, &pcd); |
| |
| seq_printf(s, "lck\t\t%-16lulck div\t%u\n", |
| dispc_lclk_rate(OMAP_DSS_CHANNEL_LCD), lcd); |
| seq_printf(s, "pck\t\t%-16lupck div\t%u\n", |
| dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD), pcd); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| seq_printf(s, "- LCD2 -\n"); |
| |
| lcd_clk_src = dss_get_lcd_clk_source(OMAP_DSS_CHANNEL_LCD2); |
| |
| seq_printf(s, "lcd2_clk source = %s (%s)\n", |
| dss_get_generic_clk_source_name(lcd_clk_src), |
| dss_feat_get_clk_source_name(lcd_clk_src)); |
| |
| dispc_get_lcd_divisor(OMAP_DSS_CHANNEL_LCD2, &lcd, &pcd); |
| |
| seq_printf(s, "lck\t\t%-16lulck div\t%u\n", |
| dispc_lclk_rate(OMAP_DSS_CHANNEL_LCD2), lcd); |
| seq_printf(s, "pck\t\t%-16lupck div\t%u\n", |
| dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD2), pcd); |
| } |
| |
| dispc_runtime_put(); |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| void dispc_dump_irqs(struct seq_file *s) |
| { |
| unsigned long flags; |
| struct dispc_irq_stats stats; |
| |
| spin_lock_irqsave(&dispc.irq_stats_lock, flags); |
| |
| stats = dispc.irq_stats; |
| memset(&dispc.irq_stats, 0, sizeof(dispc.irq_stats)); |
| dispc.irq_stats.last_reset = jiffies; |
| |
| spin_unlock_irqrestore(&dispc.irq_stats_lock, flags); |
| |
| seq_printf(s, "period %u ms\n", |
| jiffies_to_msecs(jiffies - stats.last_reset)); |
| |
| seq_printf(s, "irqs %d\n", stats.irq_count); |
| #define PIS(x) \ |
| seq_printf(s, "%-20s %10d\n", #x, stats.irqs[ffs(DISPC_IRQ_##x)-1]); |
| |
| PIS(FRAMEDONE); |
| PIS(VSYNC); |
| PIS(EVSYNC_EVEN); |
| PIS(EVSYNC_ODD); |
| PIS(ACBIAS_COUNT_STAT); |
| PIS(PROG_LINE_NUM); |
| PIS(GFX_FIFO_UNDERFLOW); |
| PIS(GFX_END_WIN); |
| PIS(PAL_GAMMA_MASK); |
| PIS(OCP_ERR); |
| PIS(VID1_FIFO_UNDERFLOW); |
| PIS(VID1_END_WIN); |
| PIS(VID2_FIFO_UNDERFLOW); |
| PIS(VID2_END_WIN); |
| if (dss_has_feature(FEAT_OVL_VID3)) { |
| PIS(VID3_FIFO_UNDERFLOW); |
| PIS(VID3_END_WIN); |
| } |
| PIS(SYNC_LOST); |
| PIS(SYNC_LOST_DIGIT); |
| PIS(WAKEUP); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| PIS(FRAMEDONE2); |
| PIS(VSYNC2); |
| PIS(ACBIAS_COUNT_STAT2); |
| PIS(SYNC_LOST2); |
| } |
| #undef PIS |
| } |
| #endif |
| |
| void dispc_dump_regs(struct seq_file *s) |
| { |
| int i, o; |
| #define DUMPREG(r) seq_printf(s, "%-50s %08x\n", #r, dispc_read_reg(r)) |
| |
| if (dispc_runtime_get()) |
| return; |
| |
| DUMPREG(DISPC_REVISION); |
| DUMPREG(DISPC_SYSCONFIG); |
| DUMPREG(DISPC_SYSSTATUS); |
| DUMPREG(DISPC_IRQSTATUS); |
| DUMPREG(DISPC_IRQENABLE); |
| DUMPREG(DISPC_CONTROL); |
| DUMPREG(DISPC_CONFIG); |
| DUMPREG(DISPC_CAPABLE); |
| DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_DIGIT)); |
| DUMPREG(DISPC_LINE_STATUS); |
| DUMPREG(DISPC_LINE_NUMBER); |
| DUMPREG(DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_TIMING_V(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_POL_FREQ(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_GLOBAL_ALPHA)) |
| DUMPREG(DISPC_GLOBAL_ALPHA); |
| DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT)); |
| DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_LCD)); |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| DUMPREG(DISPC_CONTROL2); |
| DUMPREG(DISPC_CONFIG2); |
| DUMPREG(DISPC_DEFAULT_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_TRANS_COLOR(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_TIMING_V(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_POL_FREQ(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_LCD2)); |
| } |
| |
| DUMPREG(DISPC_OVL_BA0(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_BA1(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_POSITION(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_SIZE(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_ATTRIBUTES(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_FIFO_THRESHOLD(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_FIFO_SIZE_STATUS(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_ROW_INC(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_PIXEL_INC(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_WINDOW_SKIP(OMAP_DSS_GFX)); |
| DUMPREG(DISPC_OVL_TABLE_BA(OMAP_DSS_GFX)); |
| |
| DUMPREG(DISPC_DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD)); |
| |
| if (dss_has_feature(FEAT_CPR)) { |
| DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD)); |
| DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD)); |
| } |
| if (dss_has_feature(FEAT_MGR_LCD2)) { |
| DUMPREG(DISPC_DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2)); |
| |
| if (dss_has_feature(FEAT_CPR)) { |
| DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2)); |
| DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2)); |
| } |
| } |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_GFX)); |
| |
| for (o = OMAP_DSS_VIDEO1; o <= OMAP_DSS_VIDEO3; o++) { |
| if (o == OMAP_DSS_VIDEO3 && !dss_has_feature(FEAT_OVL_VID3)) |
| continue; |
| |
| DUMPREG(DISPC_OVL_BA0(o)); |
| DUMPREG(DISPC_OVL_BA1(o)); |
| DUMPREG(DISPC_OVL_POSITION(o)); |
| DUMPREG(DISPC_OVL_SIZE(o)); |
| DUMPREG(DISPC_OVL_ATTRIBUTES(o)); |
| DUMPREG(DISPC_OVL_FIFO_THRESHOLD(o)); |
| DUMPREG(DISPC_OVL_FIFO_SIZE_STATUS(o)); |
| DUMPREG(DISPC_OVL_ROW_INC(o)); |
| DUMPREG(DISPC_OVL_PIXEL_INC(o)); |
| DUMPREG(DISPC_OVL_FIR(o)); |
| DUMPREG(DISPC_OVL_PICTURE_SIZE(o)); |
| DUMPREG(DISPC_OVL_ACCU0(o)); |
| DUMPREG(DISPC_OVL_ACCU1(o)); |
| |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_H(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_HV(o, i)); |
| |
| for (i = 0; i < 5; i++) |
| DUMPREG(DISPC_OVL_CONV_COEF(o, i)); |
| |
| if (dss_has_feature(FEAT_FIR_COEF_V)) { |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_V(o, i)); |
| } |
| |
| if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) { |
| DUMPREG(DISPC_OVL_BA0_UV(o)); |
| DUMPREG(DISPC_OVL_BA1_UV(o)); |
| DUMPREG(DISPC_OVL_FIR2(o)); |
| DUMPREG(DISPC_OVL_ACCU2_0(o)); |
| DUMPREG(DISPC_OVL_ACCU2_1(o)); |
| |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_H2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_HV2(o, i)); |
| |
| for (i = 0; i < 8; i++) |
| DUMPREG(DISPC_OVL_FIR_COEF_V2(o, i)); |
| } |
| if (dss_has_feature(FEAT_ATTR2)) |
| DUMPREG(DISPC_OVL_ATTRIBUTES2(o)); |
| |
| if (dss_has_feature(FEAT_PRELOAD)) |
| DUMPREG(DISPC_OVL_PRELOAD(o)); |
| } |
| |
| dispc_runtime_put(); |
| #undef DUMPREG |
| } |
| |
| static void _dispc_set_pol_freq(enum omap_channel channel, bool onoff, bool rf, |
| bool ieo, bool ipc, bool ihs, bool ivs, u8 acbi, u8 acb) |
| { |
| u32 l = 0; |
| |
| DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", |
| onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); |
| |
| l |= FLD_VAL(onoff, 17, 17); |
| l |= FLD_VAL(rf, 16, 16); |
| l |= FLD_VAL(ieo, 15, 15); |
| l |= FLD_VAL(ipc, 14, 14); |
| l |= FLD_VAL(ihs, 13, 13); |
| l |= FLD_VAL(ivs, 12, 12); |
| l |= FLD_VAL(acbi, 11, 8); |
| l |= FLD_VAL(acb, 7, 0); |
| |
| dispc_write_reg(DISPC_POL_FREQ(channel), l); |
| } |
| |
| void dispc_set_pol_freq(enum omap_channel channel, |
| enum omap_panel_config config, u8 acbi, u8 acb) |
| { |
| _dispc_set_pol_freq(channel, (config & OMAP_DSS_LCD_ONOFF) != 0, |
| (config & OMAP_DSS_LCD_RF) != 0, |
| (config & OMAP_DSS_LCD_IEO) != 0, |
| (config & OMAP_DSS_LCD_IPC) != 0, |
| (config & OMAP_DSS_LCD_IHS) != 0, |
| (config & OMAP_DSS_LCD_IVS) != 0, |
| acbi, acb); |
| } |
| |
| /* with fck as input clock rate, find dispc dividers that produce req_pck */ |
| void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, |
| struct dispc_clock_info *cinfo) |
| { |
| u16 pcd_min = is_tft ? 2 : 3; |
| unsigned long best_pck; |
| u16 best_ld, cur_ld; |
| u16 best_pd, cur_pd; |
| |
| best_pck = 0; |
| best_ld = 0; |
| best_pd = 0; |
| |
| for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { |
| unsigned long lck = fck / cur_ld; |
| |
| for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { |
| unsigned long pck = lck / cur_pd; |
| long old_delta = abs(best_pck - req_pck); |
| long new_delta = abs(pck - req_pck); |
| |
| if (best_pck == 0 || new_delta < old_delta) { |
| best_pck = pck; |
| best_ld = cur_ld; |
| best_pd = cur_pd; |
| |
| if (pck == req_pck) |
| goto found; |
| } |
| |
| if (pck < req_pck) |
| break; |
| } |
| |
| if (lck / pcd_min < req_pck) |
| break; |
| } |
| |
| found: |
| cinfo->lck_div = best_ld; |
| cinfo->pck_div = best_pd; |
| cinfo->lck = fck / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| } |
| |
| /* calculate clock rates using dividers in cinfo */ |
| int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, |
| struct dispc_clock_info *cinfo) |
| { |
| if (cinfo->lck_div > 255 || cinfo->lck_div == 0) |
| return -EINVAL; |
| if (cinfo->pck_div < 2 || cinfo->pck_div > 255) |
| return -EINVAL; |
| |
| cinfo->lck = dispc_fclk_rate / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| |
| return 0; |
| } |
| |
| int dispc_set_clock_div(enum omap_channel channel, |
| struct dispc_clock_info *cinfo) |
| { |
| DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div); |
| DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div); |
| |
| dispc_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div); |
| |
| return 0; |
| } |
| |
| int dispc_get_clock_div(enum omap_channel channel, |
| struct dispc_clock_info *cinfo) |
| { |
| unsigned long fck; |
| |
| fck = dispc_fclk_rate(); |
| |
| cinfo->lck_div = REG_GET(DISPC_DIVISORo(channel), 23, 16); |
| cinfo->pck_div = REG_GET(DISPC_DIVISORo(channel), 7, 0); |
| |
| cinfo->lck = fck / cinfo->lck_div; |
| cinfo->pck = cinfo->lck / cinfo->pck_div; |
| |
| return 0; |
| } |
| |
| /* dispc.irq_lock has to be locked by the caller */ |
| static void _omap_dispc_set_irqs(void) |
| { |
| u32 mask; |
| u32 old_mask; |
| int i; |
| struct omap_dispc_isr_data *isr_data; |
| |
| mask = dispc.irq_error_mask; |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (isr_data->isr == NULL) |
| continue; |
| |
| mask |= isr_data->mask; |
| } |
| |
| old_mask = dispc_read_reg(DISPC_IRQENABLE); |
| /* clear the irqstatus for newly enabled irqs */ |
| dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask); |
| |
| dispc_write_reg(DISPC_IRQENABLE, mask); |
| } |
| |
| int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) |
| { |
| int i; |
| int ret; |
| unsigned long flags; |
| struct omap_dispc_isr_data *isr_data; |
| |
| if (isr == NULL) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| /* check for duplicate entry */ |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| if (isr_data->isr == isr && isr_data->arg == arg && |
| isr_data->mask == mask) { |
| ret = -EINVAL; |
| goto err; |
| } |
| } |
| |
| isr_data = NULL; |
| ret = -EBUSY; |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (isr_data->isr != NULL) |
| continue; |
| |
| isr_data->isr = isr; |
| isr_data->arg = arg; |
| isr_data->mask = mask; |
| ret = 0; |
| |
| break; |
| } |
| |
| if (ret) |
| goto err; |
| |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return 0; |
| err: |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(omap_dispc_register_isr); |
| |
| int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) |
| { |
| int i; |
| unsigned long flags; |
| int ret = -EINVAL; |
| struct omap_dispc_isr_data *isr_data; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = &dispc.registered_isr[i]; |
| if (isr_data->isr != isr || isr_data->arg != arg || |
| isr_data->mask != mask) |
| continue; |
| |
| /* found the correct isr */ |
| |
| isr_data->isr = NULL; |
| isr_data->arg = NULL; |
| isr_data->mask = 0; |
| |
| ret = 0; |
| break; |
| } |
| |
| if (ret == 0) |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(omap_dispc_unregister_isr); |
| |
| #ifdef DEBUG |
| static void print_irq_status(u32 status) |
| { |
| if ((status & dispc.irq_error_mask) == 0) |
| return; |
| |
| printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); |
| |
| #define PIS(x) \ |
| if (status & DISPC_IRQ_##x) \ |
| printk(#x " "); |
| PIS(GFX_FIFO_UNDERFLOW); |
| PIS(OCP_ERR); |
| PIS(VID1_FIFO_UNDERFLOW); |
| PIS(VID2_FIFO_UNDERFLOW); |
| if (dss_has_feature(FEAT_OVL_VID3)) |
| PIS(VID3_FIFO_UNDERFLOW); |
| PIS(SYNC_LOST); |
| PIS(SYNC_LOST_DIGIT); |
| if (dss_has_feature(FEAT_MGR_LCD2)) |
| PIS(SYNC_LOST2); |
| #undef PIS |
| |
| printk("\n"); |
| } |
| #endif |
| |
| /* Called from dss.c. Note that we don't touch clocks here, |
| * but we presume they are on because we got an IRQ. However, |
| * an irq handler may turn the clocks off, so we may not have |
| * clock later in the function. */ |
| static irqreturn_t omap_dispc_irq_handler(int irq, void *arg) |
| { |
| int i; |
| u32 irqstatus, irqenable; |
| u32 handledirqs = 0; |
| u32 unhandled_errors; |
| struct omap_dispc_isr_data *isr_data; |
| struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; |
| |
| spin_lock(&dispc.irq_lock); |
| |
| irqstatus = dispc_read_reg(DISPC_IRQSTATUS); |
| irqenable = dispc_read_reg(DISPC_IRQENABLE); |
| |
| /* IRQ is not for us */ |
| if (!(irqstatus & irqenable)) { |
| spin_unlock(&dispc.irq_lock); |
| return IRQ_NONE; |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spin_lock(&dispc.irq_stats_lock); |
| dispc.irq_stats.irq_count++; |
| dss_collect_irq_stats(irqstatus, dispc.irq_stats.irqs); |
| spin_unlock(&dispc.irq_stats_lock); |
| #endif |
| |
| #ifdef DEBUG |
| if (dss_debug) |
| print_irq_status(irqstatus); |
| #endif |
| /* Ack the interrupt. Do it here before clocks are possibly turned |
| * off */ |
| dispc_write_reg(DISPC_IRQSTATUS, irqstatus); |
| /* flush posted write */ |
| dispc_read_reg(DISPC_IRQSTATUS); |
| |
| /* make a copy and unlock, so that isrs can unregister |
| * themselves */ |
| memcpy(registered_isr, dispc.registered_isr, |
| sizeof(registered_isr)); |
| |
| spin_unlock(&dispc.irq_lock); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| isr_data = ®istered_isr[i]; |
| |
| if (!isr_data->isr) |
| continue; |
| |
| if (isr_data->mask & irqstatus) { |
| isr_data->isr(isr_data->arg, irqstatus); |
| handledirqs |= isr_data->mask; |
| } |
| } |
| |
| spin_lock(&dispc.irq_lock); |
| |
| unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; |
| |
| if (unhandled_errors) { |
| dispc.error_irqs |= unhandled_errors; |
| |
| dispc.irq_error_mask &= ~unhandled_errors; |
| _omap_dispc_set_irqs(); |
| |
| schedule_work(&dispc.error_work); |
| } |
| |
| spin_unlock(&dispc.irq_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void dispc_error_worker(struct work_struct *work) |
| { |
| int i; |
| u32 errors; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| errors = dispc.error_irqs; |
| dispc.error_irqs = 0; |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| dispc_runtime_get(); |
| |
| if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { |
| DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 0) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { |
| DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 1) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { |
| DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 2) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_VID3_FIFO_UNDERFLOW) { |
| DSSERR("VID3_FIFO_UNDERFLOW, disabling VID3\n"); |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id == 3) { |
| dispc_enable_plane(ovl->id, 0); |
| dispc_go(ovl->manager->id); |
| mdelay(50); |
| break; |
| } |
| } |
| } |
| |
| if (errors & DISPC_IRQ_SYNC_LOST) { |
| struct omap_overlay_manager *manager = NULL; |
| bool enable = false; |
| |
| DSSERR("SYNC_LOST, disabling LCD\n"); |
| |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->id == OMAP_DSS_CHANNEL_LCD) { |
| if(!mgr->device->first_vsync){ |
| DSSERR("First SYNC_LOST.. ignoring \n"); |
| break; |
| } |
| |
| manager = mgr; |
| enable = mgr->device->state == |
| OMAP_DSS_DISPLAY_ACTIVE; |
| mgr->device->driver->disable(mgr->device); |
| break; |
| } |
| } |
| |
| if (manager) { |
| struct omap_dss_device *dssdev = manager->device; |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id != 0 && ovl->manager == manager) |
| dispc_enable_plane(ovl->id, 0); |
| } |
| |
| dispc_go(manager->id); |
| mdelay(50); |
| if (enable) |
| dssdev->driver->enable(dssdev); |
| } |
| } |
| |
| if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { |
| struct omap_overlay_manager *manager = NULL; |
| bool enable = false; |
| |
| pr_err_ratelimited("SYNC_LOST_DIGIT, disabling TV\n"); |
| |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { |
| if(!mgr->device->first_vsync){ |
| DSSERR("First SYNC_LOST..TV ignoring\n"); |
| } |
| |
| manager = mgr; |
| enable = mgr->device->state == |
| OMAP_DSS_DISPLAY_ACTIVE; |
| mgr->device->sync_lost_error = 1; |
| mgr->device->driver->disable(mgr->device); |
| mgr->device->sync_lost_error = 0; |
| break; |
| } |
| } |
| |
| if (manager) { |
| struct omap_dss_device *dssdev = manager->device; |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id != 0 && ovl->manager == manager) |
| dispc_enable_plane(ovl->id, 0); |
| } |
| |
| dispc_go(manager->id); |
| mdelay(50); |
| if (enable) |
| dssdev->driver->enable(dssdev); |
| } |
| } |
| |
| if (errors & DISPC_IRQ_SYNC_LOST2) { |
| struct omap_overlay_manager *manager = NULL; |
| bool enable = false; |
| |
| DSSERR("SYNC_LOST for LCD2, disabling LCD2\n"); |
| |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->id == OMAP_DSS_CHANNEL_LCD2) { |
| if(!mgr->device->first_vsync){ |
| DSSERR("First SYNC_LOST.. ignoring \n"); |
| break; |
| } |
| |
| manager = mgr; |
| enable = mgr->device->state == |
| OMAP_DSS_DISPLAY_ACTIVE; |
| mgr->device->driver->disable(mgr->device); |
| break; |
| } |
| } |
| |
| if (manager) { |
| struct omap_dss_device *dssdev = manager->device; |
| for (i = 0; i < omap_dss_get_num_overlays(); ++i) { |
| struct omap_overlay *ovl; |
| ovl = omap_dss_get_overlay(i); |
| |
| if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) |
| continue; |
| |
| if (ovl->id != 0 && ovl->manager == manager) |
| dispc_enable_plane(ovl->id, 0); |
| } |
| |
| dispc_go(manager->id); |
| mdelay(50); |
| if (enable) |
| dssdev->driver->enable(dssdev); |
| } |
| } |
| |
| if (errors & DISPC_IRQ_OCP_ERR) { |
| DSSERR("OCP_ERR\n"); |
| for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { |
| struct omap_overlay_manager *mgr; |
| mgr = omap_dss_get_overlay_manager(i); |
| |
| if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) |
| mgr->device->driver->disable(mgr->device); |
| } |
| } |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| dispc.irq_error_mask |= errors; |
| _omap_dispc_set_irqs(); |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| |
| dispc_runtime_put(); |
| } |
| |
| int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) |
| { |
| void dispc_irq_wait_handler(void *data, u32 mask) |
| { |
| complete((struct completion *)data); |
| } |
| |
| int r; |
| DECLARE_COMPLETION_ONSTACK(completion); |
| |
| r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, |
| irqmask); |
| |
| if (r) |
| return r; |
| |
| timeout = wait_for_completion_timeout(&completion, timeout); |
| |
| omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); |
| |
| if (timeout == 0) |
| return -ETIMEDOUT; |
| |
| if (timeout == -ERESTARTSYS) |
| return -ERESTARTSYS; |
| |
| return 0; |
| } |
| |
| int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, |
| unsigned long timeout) |
| { |
| void dispc_irq_wait_handler(void *data, u32 mask) |
| { |
| complete((struct completion *)data); |
| } |
| |
| int r; |
| DECLARE_COMPLETION_ONSTACK(completion); |
| |
| r = dispc_runtime_get(); |
| if (r) |
| return r; |
| |
| r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, |
| irqmask); |
| |
| if (r) |
| goto done; |
| |
| timeout = wait_for_completion_interruptible_timeout(&completion, |
| timeout); |
| |
| omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); |
| |
| if (timeout == 0) |
| r = -ETIMEDOUT; |
| else if (timeout == -ERESTARTSYS) |
| r = timeout; |
| |
| done: |
| dispc_runtime_put(); |
| |
| return r; |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC |
| void dispc_fake_vsync_irq(void) |
| { |
| u32 irqstatus = DISPC_IRQ_VSYNC; |
| int i; |
| |
| WARN_ON(!in_interrupt()); |
| |
| for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { |
| struct omap_dispc_isr_data *isr_data; |
| isr_data = &dispc.registered_isr[i]; |
| |
| if (!isr_data->isr) |
| continue; |
| |
| if (isr_data->mask & irqstatus) |
| isr_data->isr(isr_data->arg, irqstatus); |
| } |
| } |
| #endif |
| |
| static void _omap_dispc_initialize_irq(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dispc.irq_lock, flags); |
| |
| memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); |
| |
| dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; |
| if (dss_has_feature(FEAT_MGR_LCD2)) |
| dispc.irq_error_mask |= DISPC_IRQ_SYNC_LOST2; |
| if (dss_has_feature(FEAT_OVL_VID3)) |
| dispc.irq_error_mask |= DISPC_IRQ_VID3_FIFO_UNDERFLOW; |
| /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, |
| * so clear it */ |
| dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); |
| |
| _omap_dispc_set_irqs(); |
| |
| spin_unlock_irqrestore(&dispc.irq_lock, flags); |
| } |
| |
| void dispc_enable_sidle(void) |
| { |
| REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ |
| } |
| |
| void dispc_disable_sidle(void) |
| { |
| REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ |
| } |
| |
| static void _omap_dispc_initial_config(void) |
| { |
| u32 l; |
| |
| /* Exclusively enable DISPC_CORE_CLK and set divider to 1 */ |
| if (dss_has_feature(FEAT_CORE_CLK_DIV)) { |
| l = dispc_read_reg(DISPC_DIVISOR); |
| /* Use DISPC_DIVISOR.LCD, instead of DISPC_DIVISOR1.LCD */ |
| l = FLD_MOD(l, 1, 0, 0); |
| l = FLD_MOD(l, 1, 23, 16); |
| dispc_write_reg(DISPC_DIVISOR, l); |
| } |
| |
| /* FUNCGATED */ |
| if (dss_has_feature(FEAT_FUNCGATED)) |
| REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); |
| |
| REG_FLD_MOD(DISPC_CONFIG, 1, 17, 17); |
| |
| /* L3 firewall setting: enable access to OCM RAM */ |
| /* XXX this should be somewhere in plat-omap */ |
| if (cpu_is_omap24xx()) |
| __raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0)); |
| |
| dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); |
| |
| dispc_read_plane_fifo_sizes(); |
| } |
| |
| /* DISPC HW IP initialisation */ |
| static int omap_dispchw_probe(struct platform_device *pdev) |
| { |
| u32 rev; |
| int r = 0; |
| struct resource *dispc_mem; |
| struct clk *clk; |
| |
| dispc.pdev = pdev; |
| |
| clk = clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(clk)) { |
| DSSERR("can't get fck\n"); |
| r = PTR_ERR(clk); |
| goto err_get_clk; |
| } |
| |
| dispc.dss_clk = clk; |
| |
| spin_lock_init(&dispc.irq_lock); |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spin_lock_init(&dispc.irq_stats_lock); |
| dispc.irq_stats.last_reset = jiffies; |
| #endif |
| |
| INIT_WORK(&dispc.error_work, dispc_error_worker); |
| |
| dispc_mem = platform_get_resource(dispc.pdev, IORESOURCE_MEM, 0); |
| if (!dispc_mem) { |
| DSSERR("can't get IORESOURCE_MEM DISPC\n"); |
| r = -EINVAL; |
| goto err_ioremap; |
| } |
| dispc.base = ioremap(dispc_mem->start, resource_size(dispc_mem)); |
| if (!dispc.base) { |
| DSSERR("can't ioremap DISPC\n"); |
| r = -ENOMEM; |
| goto err_ioremap; |
| } |
| dispc.irq = platform_get_irq(dispc.pdev, 0); |
| if (dispc.irq < 0) { |
| DSSERR("platform_get_irq failed\n"); |
| r = -ENODEV; |
| goto err_irq; |
| } |
| |
| r = request_irq(dispc.irq, omap_dispc_irq_handler, IRQF_SHARED, |
| "OMAP DISPC", dispc.pdev); |
| if (r < 0) { |
| DSSERR("request_irq failed\n"); |
| goto err_irq; |
| } |
| |
| mutex_init(&dispc.runtime_lock); |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| r = dispc_runtime_get(); |
| if (r) |
| goto err_runtime_get; |
| |
| _omap_dispc_initial_config(); |
| |
| _omap_dispc_initialize_irq(); |
| |
| rev = dispc_read_reg(DISPC_REVISION); |
| dev_dbg(&pdev->dev, "OMAP DISPC rev %d.%d\n", |
| FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| |
| dispc_runtime_put(); |
| |
| return 0; |
| |
| err_runtime_get: |
| pm_runtime_disable(&pdev->dev); |
| free_irq(dispc.irq, dispc.pdev); |
| err_irq: |
| iounmap(dispc.base); |
| err_ioremap: |
| clk_put(dispc.dss_clk); |
| err_get_clk: |
| return r; |
| } |
| |
| static int omap_dispchw_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| clk_put(dispc.dss_clk); |
| |
| free_irq(dispc.irq, dispc.pdev); |
| iounmap(dispc.base); |
| return 0; |
| } |
| |
| static int dispc_runtime_suspend(struct device *dev) |
| { |
| dispc_save_context(); |
| clk_disable(dispc.dss_clk); |
| dss_runtime_put(); |
| |
| return 0; |
| } |
| |
| static int dispc_runtime_resume(struct device *dev) |
| { |
| int r; |
| |
| if (!dss_runtime_pm_enabled()) |
| return -EBUSY; |
| |
| r = dss_runtime_get(); |
| if (r < 0) |
| return r; |
| |
| clk_enable(dispc.dss_clk); |
| dispc_restore_context(); |
| |
| return 0; |
| } |
| |
| /* |
| * when dispc_runtime_resume is called by pm code in early resume, |
| * dss_runtime_get () fails because it's still in suspend. |
| * this resume callback serves to redo the broken runtime resume |
| * action in late suspend. |
| */ |
| |
| static int dispc_resume(struct device *dev) |
| { |
| return dispc_runtime_resume(dev); |
| } |
| |
| static const struct dev_pm_ops dispc_pm_ops = { |
| .runtime_suspend = dispc_runtime_suspend, |
| .runtime_resume = dispc_runtime_resume, |
| .resume = dispc_resume, |
| }; |
| |
| static struct platform_driver omap_dispchw_driver = { |
| .probe = omap_dispchw_probe, |
| .remove = omap_dispchw_remove, |
| .driver = { |
| .name = "omapdss_dispc", |
| .owner = THIS_MODULE, |
| .pm = &dispc_pm_ops, |
| }, |
| }; |
| |
| int dispc_init_platform_driver(void) |
| { |
| return platform_driver_register(&omap_dispchw_driver); |
| } |
| |
| void dispc_uninit_platform_driver(void) |
| { |
| return platform_driver_unregister(&omap_dispchw_driver); |
| } |