arch/arm/mach-omap2/board-omap4panda.c

/*
 * Board support file for OMAP4430 based PandaBoard.
 *
 * Copyright (C) 2010 Texas Instruments
 *
 * Author: David Anders <x0132446@ti.com>
 *
 * Based on mach-omap2/board-4430sdp.c
 *
 * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
 *
 * Based on mach-omap2/board-3430sdp.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#define USE_15HZ

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <linux/netdevice.h>
#include <linux/if_ether.h>
#include <linux/ti_wilink_st.h>
#include <linux/omapfb.h>

#include <mach/hardware.h>
#include <mach/omap4-common.h>
#include <mach/dmm.h>
#include <mach/id.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>

#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include <plat/dma-44xx.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-nokia-dsi.h>
#include <linux/input/synaptics_rmi_dsx.h>

#include "hsmmc.h"
#include "control.h"
#include "mux.h"
#include "common-board-devices.h"
#include "pm.h"

#define GPIO_HUB_POWER		1
#define GPIO_HUB_NRESET		62
#define HDMI_GPIO_CT_CP_HPD     60
#define HDMI_GPIO_HPD 63 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define TPS62361_GPIO   7
#define GPIO_SDIO_EXP_ACT_N	43
#define GPIO_DISPLAY_MUX        159
#define GPIO_HDMI_SELECT	160
#define GPIO_V3P3_NN		168
#define GPIO_AUDIO_CLK_EN	169

#define GPIO_BOARD_ID4		2
#define GPIO_BOARD_ID3		3
#define GPIO_BOARD_ID2		171
#define GPIO_BOARD_ID1		48
#define GPIO_BOARD_ID0		182

#define SYNAPTICS_DSX_I2C_NAME		"synaptics_dsx_i2c"
#define SYNAPTICS_DSX_I2C_ADDR		0x20
#define SYNAPTICS_DSX_GPIO_IRQ		52
#define SYNAPTICS_DSX_RESET_GPIO	121

extern int synaptics_dsx_gpio_config(struct synaptics_dsx_platform_data *pdata,
                                     bool enable);


static struct gpio_led gpio_leds[] = {
	{
		.name			= "pandaboard::status1",
		.default_trigger	= "heartbeat",
	},
	{
		.name			= "pandaboard::status2",
		.default_trigger	= "mmc0",
	},
};

static struct gpio_led_platform_data gpio_led_info = {
	.leds		= gpio_leds,
	.num_leds	= ARRAY_SIZE(gpio_leds),
};

static struct platform_device leds_gpio = {
	.name	= "leds-gpio",
	.id	= -1,
	.dev	= {
		.platform_data	= &gpio_led_info,
	},
};

static void __init panda_leds_init(void)
{
	if (cpu_is_omap443x()) {
		gpio_leds[0].gpio = 7;
		gpio_leds[1].gpio = 8;
	} else {
		gpio_leds[0].gpio = 110;
		gpio_leds[1].gpio = 8;
	}

	platform_device_register(&leds_gpio);
}

static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
	.phy_reset  = false,
	.reset_gpio_port[0]  = -EINVAL,
	.reset_gpio_port[1]  = -EINVAL,
	.reset_gpio_port[2]  = -EINVAL
};

static struct gpio panda_ehci_gpios[] __initdata = {
	{ GPIO_HUB_POWER,	GPIOF_OUT_INIT_LOW,  "hub_power"  },
	{ GPIO_HUB_NRESET,	GPIOF_OUT_INIT_LOW,  "hub_nreset" },
};

static void __init omap4_ehci_init(void)
{
	int ret;
	struct clk *phy_ref_clk;

	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
	if (IS_ERR(phy_ref_clk)) {
		pr_err("Cannot request auxclk3\n");
		return;
	}
	clk_set_rate(phy_ref_clk, 19200000);
	clk_enable(phy_ref_clk);

	/* disable the power to the usb hub prior to init and reset phy+hub */
	ret = gpio_request_array(panda_ehci_gpios,
				 ARRAY_SIZE(panda_ehci_gpios));
	if (ret) {
		pr_err("Unable to initialize EHCI power/reset\n");
		return;
	}

	gpio_export(GPIO_HUB_POWER, 0);
	gpio_export(GPIO_HUB_NRESET, 0);
	gpio_set_value(GPIO_HUB_NRESET, 1);

	usbhs_init(&usbhs_bdata);

	/* enable power to hub */
	gpio_set_value(GPIO_HUB_POWER, 1);
}

static struct omap_musb_board_data musb_board_data = {
	.interface_type		= MUSB_INTERFACE_UTMI,
	.mode			= MUSB_OTG,
	.power			= 100,
};

static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
		.gpio_wp	= -EINVAL,
		.gpio_cd	= -EINVAL,
	},
	{
		/* on AP dev board and FF board */
		.name		= "sd8787",
		.mmc		= 4,
		.caps		= MMC_CAP_4_BIT_DATA /*| MMC_CAP_POWER_OFF_CARD*/,
		.gpio_wp	= -EINVAL,
		.gpio_cd	= -EINVAL,
		.ocr_mask	= MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33,
		.nonremovable	= true,
	},
	{}	/* Terminator */
};

static struct regulator_consumer_supply tonka_vsdio_supply[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.3"),	/* Tonka */
};

static struct platform_device *panda_devices[] __initdata = {
};

static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
	.irq = OMAP_GPIO_IRQ(115),
	.board_ref_clock = 2,	// 38.4 MHz
};

static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
	int ret = 0;
	struct platform_device *pdev = container_of(dev,
				struct platform_device, dev);
	struct omap_mmc_platform_data *pdata = dev->platform_data;

	if (!pdata) {
		dev_err(dev, "%s: NULL platform data\n", __func__);
		return -EINVAL;
	}
	/* Setting MMC1 Card detect Irq */
	if (pdev->id == 0) {
		ret = twl6030_mmc_card_detect_config();
		 if (ret)
			dev_err(dev, "%s: Error card detect config(%d)\n",
				__func__, ret);
		 else
			pdata->slots[0].card_detect = twl6030_mmc_card_detect;
	}
	return ret;
}

static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
{
	struct omap_mmc_platform_data *pdata;

	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
	if (!dev) {
		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
		return;
	}
	pdata = dev->platform_data;

	pdata->init =	omap4_twl6030_hsmmc_late_init;
}

static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
	struct omap2_hsmmc_info *c;

	omap2_hsmmc_init(controllers);
	for (c = controllers; c->mmc; c++)
		omap4_twl6030_hsmmc_set_late_init(c->dev);

	return 0;
}

static struct regulator_init_data omap4_panda_vaux1 = {
	.constraints = {
		.min_uV			= 1000000,
		.max_uV			= 3300000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies  = ARRAY_SIZE(tonka_vsdio_supply),
	.consumer_supplies      = tonka_vsdio_supply,
};

static struct regulator_init_data omap4_panda_vusim = {
	.constraints = {
		.min_uV			= 1200000,
		.max_uV			= 2900000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
};

static struct regulator_consumer_supply omap4_panda_vcxio_supply[] = {
        OMAP_DSS_SUPPLIES,
};


static struct regulator_init_data omap4_panda_vcxio = {
       .constraints = {
               .min_uV           = 1800000,
               .max_uV           = 1800000,
               .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY,
               .valid_ops_mask   = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
               .always_on        = true,
       },
       .num_consumer_supplies  = ARRAY_SIZE(omap4_panda_vcxio_supply),
       .consumer_supplies      = omap4_panda_vcxio_supply,
};

/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata = {
	/* Regulators */
	.vusim		= &omap4_panda_vusim,
	.vaux1		= &omap4_panda_vaux1,
        .vcxio          = &omap4_panda_vcxio,
};

static struct synaptics_dsx_platform_data synaptics_dsx_pdata = {
	.irq_gpio = SYNAPTICS_DSX_GPIO_IRQ,
	.reset_gpio = SYNAPTICS_DSX_RESET_GPIO,
	.gpio_config = synaptics_dsx_gpio_config,
        .normal_mode = true,
        .one_touch_enabled = 1,
        .reset_on_resume = 1,
        .hw_reset = 1,
};

static struct i2c_board_info __initdata tonka_i2c2_info[] = {
	{
		I2C_BOARD_INFO(SYNAPTICS_DSX_I2C_NAME, SYNAPTICS_DSX_I2C_ADDR),
		.platform_data = &synaptics_dsx_pdata,
		.irq = OMAP_GPIO_IRQ(SYNAPTICS_DSX_GPIO_IRQ),
	},
};

static struct i2c_board_info __initdata tonka_i2c3_info[] = {
};

static struct i2c_board_info __initdata tonka_i2c4_info[] = {
};

static int __init omap4_panda_i2c_init(void)
{
	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
			TWL_COMMON_REGULATOR_VDAC |
			TWL_COMMON_REGULATOR_VAUX2 |
			TWL_COMMON_REGULATOR_VAUX3 |
			TWL_COMMON_REGULATOR_VMMC |
			TWL_COMMON_REGULATOR_VPP |
			TWL_COMMON_REGULATOR_VANA |
			TWL_COMMON_REGULATOR_VCXIO |
			TWL_COMMON_REGULATOR_VUSB |
			TWL_COMMON_REGULATOR_CLK32KG);
	omap4_pmic_init("twl6030", &omap4_panda_twldata);
	omap_register_i2c_bus(2, 400, tonka_i2c2_info,
					ARRAY_SIZE(tonka_i2c2_info));
	omap_register_i2c_bus(3, 400, tonka_i2c3_info,
					ARRAY_SIZE(tonka_i2c3_info));
	omap_register_i2c_bus(4, 400, tonka_i2c4_info,
					ARRAY_SIZE(tonka_i2c4_info));
	return 0;
}

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	/* WLAN SDIO: enable */
//	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),

	/* WLAN SDIO (Tonka) */
	OMAP4_MUX(MCSPI4_CLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_cmd */
	OMAP4_MUX(MCSPI4_SIMO, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_clk */
	OMAP4_MUX(MCSPI4_SOMI, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_dat0 */
	OMAP4_MUX(UART4_TX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_dat1 */
	OMAP4_MUX(UART4_RX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_dat2 */
	OMAP4_MUX(MCSPI4_CS0, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),	/* sdmmc4_dat3 */

	{ .reg_offset = OMAP_MUX_TERMINATOR },
};

static struct omap_device_pad serial2_pads[] __initdata = {
	OMAP_MUX_STATIC("uart2_cts.uart2_cts",
			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart2_rts.uart2_rts",
			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart2_rx.uart2_rx",
			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart2_tx.uart2_tx",
			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};

static struct omap_device_pad serial3_pads[] __initdata = {
	OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
	OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};

static struct omap_board_data serial2_data __initdata = {
	.id             = 1,
	.pads           = serial2_pads,
	.pads_cnt       = ARRAY_SIZE(serial2_pads),
};

static struct omap_board_data serial3_data __initdata = {
	.id             = 2,
	.pads           = serial3_pads,
	.pads_cnt       = ARRAY_SIZE(serial3_pads),
};

static inline void board_serial_init(void)
{
	struct omap_board_data bdata;
	bdata.flags     = 0;
	bdata.pads      = NULL;
	bdata.pads_cnt  = 0;
	bdata.id        = 0;
	/* pass dummy data for UART1 */
	omap_serial_init_port(&bdata);

	omap_serial_init_port(&serial2_data);
	omap_serial_init_port(&serial3_data);
}
#else
#define board_mux	NULL

static inline void board_serial_init(void)
{
	omap_serial_init();
}
#endif

#if 1
/* Display DVI */

/* Using generic display panel */
static struct panel_generic_dpi_data omap4_dvi_panel = {
#if 0
	.name			= "generic_720p",
#else
	.name			= "dell_u2412m",
#endif
};

struct omap_dss_device omap4_panda_dvi_device = {
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.name			= "dvi",
	.driver_name		= "generic_dpi_panel",
	.data			= &omap4_dvi_panel,
	.phy.dpi.data_lines	= 24,
	.channel		= OMAP_DSS_CHANNEL_LCD2,
};
#endif

static struct gpio panda_hdmi_gpios[] = {
	{ HDMI_GPIO_CT_CP_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
};

static void omap4_panda_hdmi_mux_init(void)
{
	u32 r;
	int status;
	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
	omap_mux_init_signal("hdmi_hpd.hdmi_hpd",
				OMAP_PIN_INPUT_PULLUP);
	omap_mux_init_signal("gpmc_wait2.gpio_100",
			OMAP_PIN_INPUT_PULLDOWN);
	omap_mux_init_signal("hdmi_cec.hdmi_cec",
			OMAP_PIN_INPUT_PULLUP);
	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
	omap_mux_init_signal("hdmi_ddc_scl.hdmi_ddc_scl",
			OMAP_PIN_INPUT_PULLUP);
	omap_mux_init_signal("hdmi_ddc_sda.hdmi_ddc_sda",
			OMAP_PIN_INPUT_PULLUP);

	/* strong pullup on DDC lines using unpublished register */
	r = ((1 << 24) | (1 << 28)) ;
	omap4_ctrl_pad_writel(r, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1);

	gpio_request(HDMI_GPIO_HPD, NULL);
	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT | OMAP_PULL_ENA);
	gpio_direction_input(HDMI_GPIO_HPD);

	status = gpio_request_array(panda_hdmi_gpios,
				    ARRAY_SIZE(panda_hdmi_gpios));
	if (status)
		pr_err("Cannot request HDMI GPIOs\n");
}

static struct omap_dss_device  omap4_panda_hdmi_device = {
	.name = "hdmi",
	.driver_name = "hdmi_panel",
	.type = OMAP_DISPLAY_TYPE_HDMI,
	.clocks	= {
		.dispc	= {
			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
		},
		.hdmi	= {
			.regn	= 15,
			.regm2	= 1,
		},
	},
	.hpd_gpio = HDMI_GPIO_HPD,
	.channel = OMAP_DSS_CHANNEL_DIGIT,
};

static struct nokia_dsi_panel_data dsi1_panel = {
        .name = "tonka",
        .reset_gpio = 102,
        .use_ext_te = true,
        .ext_te_gpio = 101,
        .esd_interval = 0,
};

static struct omap_dss_device omap4_panda_fpc_dsi_device = {
    .name = "lcd",
    .driver_name = "tonka",
    .type = OMAP_DISPLAY_TYPE_DSI,
    .data =  &dsi1_panel,

    .phy.dsi = {
        .type = OMAP_DSS_DSI_TYPE_CMD_MODE,
         .clk_lane = 1,
         .clk_pol = 0,
         .data1_lane = 2,
         .data1_pol = 0,
         .data2_lane = 3,
         .data2_pol = 0,
         .data3_lane = 4,
         .data3_pol = 0,
         .data4_lane = 5,
         .data4_pol = 0,
    },

    .clocks = {
        .dispc = {
            .channel = {
                .lck_div = 1,
#ifndef USE_15HZ
                .pck_div = 3,
#else
                .pck_div = 6,
#endif
                .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
            },
            .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
        },

        .dsi = {
#ifndef USE_15HZ
	    .regn = 16,		// Fint = 2.4 MHz
            .regm = 180,	// DDR clock = 216 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 172.8 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 172.8 MHz
            .lp_clk_div = 10,	// LP Clock = 8.64 MHz
#else
            .regn = 16,		// Fint = 2.4 MHz
            .regm = 90,		// DDR clock = 108 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 86.4 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 86.4 MHz
            .lp_clk_div = 5,	// LP Clock = 8.64 MHz
#endif
            .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI
        },
    },

    .panel = {
        .width_in_um = 57960,
        .height_in_um = 103040,
    },

    .channel = OMAP_DSS_CHANNEL_LCD,
};

static struct omap_dss_device omap4_panda_fpga_dsi_device = {
    .name = "lcd",
    .driver_name = "tonka",
    .type = OMAP_DISPLAY_TYPE_DSI,
    .data =  &dsi1_panel,

    .phy.dsi = {
        .type = OMAP_DSS_DSI_TYPE_CMD_MODE,
         .clk_lane = 3,
         .clk_pol = 0,
         .data1_lane = 2,
         .data1_pol = 0,
         .data2_lane = 4,
         .data2_pol = 0,
         .data3_lane = 5,
         .data3_pol = 0,
         .data4_lane = 1,
         .data4_pol = 0,
    },

    .clocks = {
        .dispc = {
            .channel = {
                .lck_div = 1,
#ifndef USE_15HZ
                .pck_div = 3,
#else
                .pck_div = 6,
#endif
                .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
            },
            .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
        },

        .dsi = {
#ifndef USE_15HZ
	    .regn = 16,		// Fint = 2.4 MHz
            .regm = 180,	// DDR clock = 216 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 172.8 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 172.8 MHz
            .lp_clk_div = 10,	// LP Clock = 8.64 MHz
#else
            .regn = 16,		// Fint = 2.4 MHz
            .regm = 90,		// DDR clock = 108 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 86.4 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 86.4 MHz
            .lp_clk_div = 5,	// LP Clock = 8.64 MHz
#endif
            .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI
        },
    },

    .panel = {
        .width_in_um = 57960,
        .height_in_um = 103040,
    },

    .channel = OMAP_DSS_CHANNEL_LCD,
};

static struct omap_dss_device omap4_panda_fpga_ff_dsi_device = {
    .name = "lcd",
    .driver_name = "tonka",
    .type = OMAP_DISPLAY_TYPE_DSI,
    .data =  &dsi1_panel,

    .phy.dsi = {
        .type = OMAP_DSS_DSI_TYPE_CMD_MODE,
         .clk_lane = 2,
         .clk_pol = 0,
         .data1_lane = 5,
         .data1_pol = 0,
         .data2_lane = 1,
         .data2_pol = 0,
         .data3_lane = 4,
         .data3_pol = 0,
         .data4_lane = 3,
         .data4_pol = 0,
    },

    .clocks = {
        .dispc = {
            .channel = {
                .lck_div = 1,
#ifndef USE_15HZ
                .pck_div = 3,
#else
                .pck_div = 6,
#endif
                .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
            },
            .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
        },

        .dsi = {
#ifndef USE_15HZ
	    .regn = 16,		// Fint = 2.4 MHz
            .regm = 180,	// DDR clock = 216 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 172.8 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 172.8 MHz
            .lp_clk_div = 10,	// LP Clock = 8.64 MHz
#else
            .regn = 16,		// Fint = 2.4 MHz
            .regm = 90,		// DDR clock = 108 MHz
            .regm_dispc = 5,	// PLL1_CLK1 = 86.4 MHz
            .regm_dsi = 5,	// PLL1_CLK2 = 86.4 MHz
            .lp_clk_div = 5,	// LP Clock = 8.64 MHz
#endif
            .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI
        },
    },

    .panel = {
        .width_in_um = 57960,
        .height_in_um = 103040,
    },

    .channel = OMAP_DSS_CHANNEL_LCD,
};

static int omap4_tonka_is_dev(void)
{
	return gpio_get_value(GPIO_BOARD_ID4);
}

static void omap4_panda_dsi_mux_init(void)
{
    int rc;
    unsigned int reg;

    reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
    reg &= ~OMAP4_DSI1_LANEENABLE_MASK;
    reg |= (0x1f) << OMAP4_DSI1_LANEENABLE_SHIFT;
    reg &= ~OMAP4_DSI1_PIPD_MASK;
    reg |= (0x1f) << OMAP4_DSI1_PIPD_SHIFT;
    omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);

    rc = gpio_request_one(dsi1_panel.reset_gpio,
                          GPIOF_DIR_OUT,
                          "lcd1_reset_gpio");
    if (rc) {
        pr_err("%s: Could not request lcd1 reset gpio\n", __func__);
    }
}

static struct omap_dss_device *omap4_panda_hdmi_dss_devices[] = {
	&omap4_panda_dvi_device,
	&omap4_panda_hdmi_device,
};

static struct omap_dss_board_info omap4_panda_hdmi_dss_data = {
	.num_devices	= ARRAY_SIZE(omap4_panda_hdmi_dss_devices),
	.devices	= omap4_panda_hdmi_dss_devices,
	.default_device	= &omap4_panda_hdmi_device,
};

static struct omap_dss_device *omap4_panda_fpc_dss_devices[] = {
	&omap4_panda_fpc_dsi_device,
};

static struct omap_dss_board_info omap4_panda_fpc_dss_data = {
	.num_devices	= ARRAY_SIZE(omap4_panda_fpc_dss_devices),
	.devices	= omap4_panda_fpc_dss_devices,
	.default_device	= &omap4_panda_fpc_dsi_device,
};

static struct omap_dss_device *omap4_panda_fpga_dss_devices[] = {
	&omap4_panda_fpga_dsi_device,
};

static struct omap_dss_board_info omap4_panda_fpga_dss_data = {
	.num_devices	= ARRAY_SIZE(omap4_panda_fpga_dss_devices),
	.devices	= omap4_panda_fpga_dss_devices,
	.default_device	= &omap4_panda_fpga_dsi_device,
};

static struct omap_dss_device *omap4_panda_fpga_ff_dss_devices[] = {
	&omap4_panda_fpga_ff_dsi_device,
};

static struct omap_dss_board_info omap4_panda_fpga_ff_dss_data = {
	.num_devices	= ARRAY_SIZE(omap4_panda_fpga_ff_dss_devices),
	.devices	= omap4_panda_fpga_ff_dss_devices,
	.default_device	= &omap4_panda_fpga_ff_dsi_device,
};

static struct gpio panda_dss_gpios[] __initdata = {
	{ GPIO_HDMI_SELECT,	GPIOF_IN,	      "hdmi_select"  },
	{ GPIO_DISPLAY_MUX,	GPIOF_IN,	      "display_mux" },
	{ GPIO_V3P3_NN,		GPIOF_OUT_INIT_HIGH,  "v3p3_nn" },
};

void omap4_panda_display_init(void)
{
	int r;

	omap4_panda_hdmi_mux_init();
        omap4_panda_dsi_mux_init();

	r = gpio_request_array(panda_dss_gpios, ARRAY_SIZE(panda_dss_gpios));
	if (r)
		pr_err("error mapping display GPIOs");

	if (omap4_tonka_is_dev()) {
		if (gpio_get_value(GPIO_HDMI_SELECT)) {
			omap_display_init(&omap4_panda_hdmi_dss_data);
		} else {
			if (!gpio_get_value(GPIO_DISPLAY_MUX))
				omap_display_init(&omap4_panda_fpc_dss_data);
			else
				omap_display_init(&omap4_panda_fpga_dss_data);
		}
	} else {
		omap_display_init(&omap4_panda_fpga_ff_dss_data);
	}
}

/*
 * These device paths represent the onboard USB <-> Ethernet bridge, and
 * the WLAN module on Panda, both of which need their random or all-zeros
 * mac address replacing with a per-cpu stable generated one
 */
static const char * const panda_fixup_mac_device_paths[] = {
	"usb1/1-1/1-1.1/1-1.1:1.0",
	"mmc1:0001:2",
};

static int panda_device_path_need_mac(struct device *dev)
{
	const char **try = (const char **)panda_fixup_mac_device_paths;
	const char *path;
	int count = ARRAY_SIZE(panda_fixup_mac_device_paths);
	const char *p;
	int len;
	struct device *devn;

	while (count--) {

		p = *try + strlen(*try);
		devn = dev;

		while (devn) {

			path = dev_name(devn);
			len = strlen(path);

			if ((p - *try) < len) {
				devn = NULL;
				continue;
			}

			p -= len;

			if (strncmp(path, p, len)) {
				devn = NULL;
				continue;
			}

			devn = devn->parent;
			if (p == *try)
				return count;

			if (devn != NULL && (p - *try) < 2)
				devn = NULL;

			p--;
			if (devn != NULL && *p != '/')
				devn = NULL;
		}

		try++;
	}

	return -ENOENT;
}

static int omap_panda_netdev_event(struct notifier_block *this,
						 unsigned long event, void *ptr)
{
	struct net_device *dev = ptr;
	struct sockaddr sa;
	int n;

	if (event != NETDEV_REGISTER)
		return NOTIFY_DONE;

	n = panda_device_path_need_mac(dev->dev.parent);
	if (n >= 0) {
		sa.sa_family = dev->type;
		omap2_die_id_to_ethernet_mac(sa.sa_data, n);
		dev->netdev_ops->ndo_set_mac_address(dev, &sa);
	}

	return NOTIFY_DONE;
}

static struct notifier_block omap_panda_netdev_notifier = {
	.notifier_call = omap_panda_netdev_event,
	.priority = 1,
};

#define PANDA_FB_RAM_SIZE                SZ_16M /* 1920×1080*4 * 2 */
static struct omapfb_platform_data panda_fb_pdata = {
	.mem_desc = {
		.region_cnt = 1,
		.region = {
			[0] = {
				.size = PANDA_FB_RAM_SIZE,
			},
		},
	},
};

static void __init omap4_panda_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
		pr_err("error setting wl12xx data\n");

        omap_mux_init_gpio(SYNAPTICS_DSX_GPIO_IRQ, OMAP_PIN_INPUT_PULLUP);
        omap_mux_init_gpio(SYNAPTICS_DSX_RESET_GPIO, OMAP_PIN_INPUT_PULLUP);

	register_netdevice_notifier(&omap_panda_netdev_notifier);

	omap4_panda_i2c_init();

        omap_enable_smartreflex_on_init();

	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	panda_leds_init();
	board_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap_dmm_init();
	omapfb_set_platform_data(&panda_fb_pdata);
	omap4_panda_display_init();

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
				OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}
}

static void __init omap4_panda_map_io(void)
{
	omap2_set_globals_443x();
	omap44xx_map_common_io();
}

static const char *omap4_panda_match[] __initdata = {
	"ti,omap4-panda",
	NULL,
};

MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
	/* Maintainer: David Anders - Texas Instruments Inc */
	.atag_offset	= 0x100,
	.reserve	= omap_reserve,
	.map_io		= omap4_panda_map_io,
	.init_early	= omap4430_init_early,
	.init_irq	= gic_init_irq,
	.init_machine	= omap4_panda_init,
	.timer		= &omap4_timer,
	.dt_compat	= omap4_panda_match,
#ifdef CONFIG_ZONE_DMA                                                          
        .dma_zone_size  = 500 * 1024 * 1024,
#endif 
MACHINE_END