drivers/serial/mpsc.h - kernel/panda - Git at Google

 /*
  * drivers/serial/mpsc.h
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
  * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */

 #ifndef	__MPSC_H__
 #define	__MPSC_H__

 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mv643xx.h>

 #include <asm/io.h>
 #include <asm/irq.h>

 #if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif

 #define	MPSC_NUM_CTLRS		2

 /*
  * Descriptors and buffers must be cache line aligned.
  * Buffers lengths must be multiple of cache line size.
  * Number of Tx & Rx descriptors must be powers of 2.
  */
 #define	MPSC_RXR_ENTRIES	32
 #define	MPSC_RXRE_SIZE		dma_get_cache_alignment()
 #define	MPSC_RXR_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
 #define	MPSC_RXBE_SIZE		dma_get_cache_alignment()
 #define	MPSC_RXB_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)

 #define	MPSC_TXR_ENTRIES	32
 #define	MPSC_TXRE_SIZE		dma_get_cache_alignment()
 #define	MPSC_TXR_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
 #define	MPSC_TXBE_SIZE		dma_get_cache_alignment()
 #define	MPSC_TXB_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)

 #define	MPSC_DMA_ALLOC_SIZE	(MPSC_RXR_SIZE + MPSC_RXB_SIZE +	\
 				MPSC_TXR_SIZE + MPSC_TXB_SIZE +		\
 				dma_get_cache_alignment() /* for alignment */)

 /* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
 struct mpsc_rx_desc {
 	u16 bufsize;
 	u16 bytecnt;
 	u32 cmdstat;
 	u32 link;
 	u32 buf_ptr;
 } __attribute((packed));

 struct mpsc_tx_desc {
 	u16 bytecnt;
 	u16 shadow;
 	u32 cmdstat;
 	u32 link;
 	u32 buf_ptr;
 } __attribute((packed));

 /*
  * Some regs that have the erratum that you can't read them are are shared
  * between the two MPSC controllers.  This struct contains those shared regs.
  */
 struct mpsc_shared_regs {
 	phys_addr_t mpsc_routing_base_p;
 	phys_addr_t sdma_intr_base_p;

 	void *mpsc_routing_base;
 	void *sdma_intr_base;

 	u32 MPSC_MRR_m;
 	u32 MPSC_RCRR_m;
 	u32 MPSC_TCRR_m;
 	u32 SDMA_INTR_CAUSE_m;
 	u32 SDMA_INTR_MASK_m;
 };

 /* The main driver data structure */
 struct mpsc_port_info {
 	struct uart_port port;	/* Overlay uart_port structure */

 	/* Internal driver state for this ctlr */
 	u8 ready;
 	u8 rcv_data;
 	tcflag_t c_iflag;	/* save termios->c_iflag */
 	tcflag_t c_cflag;	/* save termios->c_cflag */

 	/* Info passed in from platform */
 	u8 mirror_regs;		/* Need to mirror regs? */
 	u8 cache_mgmt;		/* Need manual cache mgmt? */
 	u8 brg_can_tune;	/* BRG has baud tuning? */
 	u32 brg_clk_src;
 	u16 mpsc_max_idle;
 	int default_baud;
 	int default_bits;
 	int default_parity;
 	int default_flow;

 	/* Physical addresses of various blocks of registers (from platform) */
 	phys_addr_t mpsc_base_p;
 	phys_addr_t sdma_base_p;
 	phys_addr_t brg_base_p;

 	/* Virtual addresses of various blocks of registers (from platform) */
 	void *mpsc_base;
 	void *sdma_base;
 	void *brg_base;

 	/* Descriptor ring and buffer allocations */
 	void *dma_region;
 	dma_addr_t dma_region_p;

 	dma_addr_t rxr;		/* Rx descriptor ring */
 	dma_addr_t rxr_p;	/* Phys addr of rxr */
 	u8 *rxb;		/* Rx Ring I/O buf */
 	u8 *rxb_p;		/* Phys addr of rxb */
 	u32 rxr_posn;		/* First desc w/ Rx data */

 	dma_addr_t txr;		/* Tx descriptor ring */
 	dma_addr_t txr_p;	/* Phys addr of txr */
 	u8 *txb;		/* Tx Ring I/O buf */
 	u8 *txb_p;		/* Phys addr of txb */
 	int txr_head;		/* Where new data goes */
 	int txr_tail;		/* Where sent data comes off */

 	/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
 	u32 MPSC_MPCR_m;
 	u32 MPSC_CHR_1_m;
 	u32 MPSC_CHR_2_m;
 	u32 MPSC_CHR_10_m;
 	u32 BRG_BCR_m;
 	struct mpsc_shared_regs *shared_regs;
 };

 /* Hooks to platform-specific code */
 int mpsc_platform_register_driver(void);
 void mpsc_platform_unregister_driver(void);

 /* Hooks back in to mpsc common to be called by platform-specific code */
 struct mpsc_port_info *mpsc_device_probe(int index);
 struct mpsc_port_info *mpsc_device_remove(int index);

 /*
  *****************************************************************************
  *
  *	Multi-Protocol Serial Controller Interface Registers
  *
  *****************************************************************************
  */

 /* Main Configuratino Register Offsets */
 #define	MPSC_MMCRL			0x0000
 #define	MPSC_MMCRH			0x0004
 #define	MPSC_MPCR			0x0008
 #define	MPSC_CHR_1			0x000c
 #define	MPSC_CHR_2			0x0010
 #define	MPSC_CHR_3			0x0014
 #define	MPSC_CHR_4			0x0018
 #define	MPSC_CHR_5			0x001c
 #define	MPSC_CHR_6			0x0020
 #define	MPSC_CHR_7			0x0024
 #define	MPSC_CHR_8			0x0028
 #define	MPSC_CHR_9			0x002c
 #define	MPSC_CHR_10			0x0030
 #define	MPSC_CHR_11			0x0034

 #define	MPSC_MPCR_FRZ			(1 << 9)
 #define	MPSC_MPCR_CL_5			0
 #define	MPSC_MPCR_CL_6			1
 #define	MPSC_MPCR_CL_7			2
 #define	MPSC_MPCR_CL_8			3
 #define	MPSC_MPCR_SBL_1			0
 #define	MPSC_MPCR_SBL_2			1

 #define	MPSC_CHR_2_TEV			(1<<1)
 #define	MPSC_CHR_2_TA			(1<<7)
 #define	MPSC_CHR_2_TTCS			(1<<9)
 #define	MPSC_CHR_2_REV			(1<<17)
 #define	MPSC_CHR_2_RA			(1<<23)
 #define	MPSC_CHR_2_CRD			(1<<25)
 #define	MPSC_CHR_2_EH			(1<<31)
 #define	MPSC_CHR_2_PAR_ODD		0
 #define	MPSC_CHR_2_PAR_SPACE		1
 #define	MPSC_CHR_2_PAR_EVEN		2
 #define	MPSC_CHR_2_PAR_MARK		3

 /* MPSC Signal Routing */
 #define	MPSC_MRR			0x0000
 #define	MPSC_RCRR			0x0004
 #define	MPSC_TCRR			0x0008

 /*
  *****************************************************************************
  *
  *	Serial DMA Controller Interface Registers
  *
  *****************************************************************************
  */

 #define	SDMA_SDC			0x0000
 #define	SDMA_SDCM			0x0008
 #define	SDMA_RX_DESC			0x0800
 #define	SDMA_RX_BUF_PTR			0x0808
 #define	SDMA_SCRDP			0x0810
 #define	SDMA_TX_DESC			0x0c00
 #define	SDMA_SCTDP			0x0c10
 #define	SDMA_SFTDP			0x0c14

 #define	SDMA_DESC_CMDSTAT_PE		(1<<0)
 #define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
 #define	SDMA_DESC_CMDSTAT_FR		(1<<3)
 #define	SDMA_DESC_CMDSTAT_OR		(1<<6)
 #define	SDMA_DESC_CMDSTAT_BR		(1<<9)
 #define	SDMA_DESC_CMDSTAT_MI		(1<<10)
 #define	SDMA_DESC_CMDSTAT_A		(1<<11)
 #define	SDMA_DESC_CMDSTAT_AM		(1<<12)
 #define	SDMA_DESC_CMDSTAT_CT		(1<<13)
 #define	SDMA_DESC_CMDSTAT_C		(1<<14)
 #define	SDMA_DESC_CMDSTAT_ES		(1<<15)
 #define	SDMA_DESC_CMDSTAT_L		(1<<16)
 #define	SDMA_DESC_CMDSTAT_F		(1<<17)
 #define	SDMA_DESC_CMDSTAT_P		(1<<18)
 #define	SDMA_DESC_CMDSTAT_EI		(1<<23)
 #define	SDMA_DESC_CMDSTAT_O		(1<<31)

 #define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O |	\
 					SDMA_DESC_CMDSTAT_EI)

 #define	SDMA_SDC_RFT			(1<<0)
 #define	SDMA_SDC_SFM			(1<<1)
 #define	SDMA_SDC_BLMR			(1<<6)
 #define	SDMA_SDC_BLMT			(1<<7)
 #define	SDMA_SDC_POVR			(1<<8)
 #define	SDMA_SDC_RIFB			(1<<9)

 #define	SDMA_SDCM_ERD			(1<<7)
 #define	SDMA_SDCM_AR			(1<<15)
 #define	SDMA_SDCM_STD			(1<<16)
 #define	SDMA_SDCM_TXD			(1<<23)
 #define	SDMA_SDCM_AT			(1<<31)

 #define	SDMA_0_CAUSE_RXBUF		(1<<0)
 #define	SDMA_0_CAUSE_RXERR		(1<<1)
 #define	SDMA_0_CAUSE_TXBUF		(1<<2)
 #define	SDMA_0_CAUSE_TXEND		(1<<3)
 #define	SDMA_1_CAUSE_RXBUF		(1<<8)
 #define	SDMA_1_CAUSE_RXERR		(1<<9)
 #define	SDMA_1_CAUSE_TXBUF		(1<<10)
 #define	SDMA_1_CAUSE_TXEND		(1<<11)

 #define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
 	SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
 #define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
 	SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)

 /* SDMA Interrupt registers */
 #define	SDMA_INTR_CAUSE			0x0000
 #define	SDMA_INTR_MASK			0x0080

 /*
  *****************************************************************************
  *
  *	Baud Rate Generator Interface Registers
  *
  *****************************************************************************
  */

 #define	BRG_BCR				0x0000
 #define	BRG_BTR				0x0004

 #endif				/* __MPSC_H__ */
	/*
	* drivers/serial/mpsc.h
	*
	* Author: Mark A. Greer <mgreer@mvista.com>
	*
	* 2004 (c) MontaVista, Software, Inc. This file is licensed under
	* the terms of the GNU General Public License version 2. This program
	* is licensed "as is" without any warranty of any kind, whether express
	* or implied.
	*/

	#ifndef __MPSC_H__
	#define __MPSC_H__

	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/moduleparam.h>
	#include <linux/tty.h>
	#include <linux/tty_flip.h>
	#include <linux/ioport.h>
	#include <linux/init.h>
	#include <linux/console.h>
	#include <linux/sysrq.h>
	#include <linux/serial.h>
	#include <linux/serial_core.h>
	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/dma-mapping.h>
	#include <linux/mv643xx.h>

	#include <asm/io.h>
	#include <asm/irq.h>

	#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
	#define SUPPORT_SYSRQ
	#endif

	#define MPSC_NUM_CTLRS 2

	/*
	* Descriptors and buffers must be cache line aligned.
	* Buffers lengths must be multiple of cache line size.
	* Number of Tx & Rx descriptors must be powers of 2.
	*/
	#define MPSC_RXR_ENTRIES 32
	#define MPSC_RXRE_SIZE dma_get_cache_alignment()
	#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
	#define MPSC_RXBE_SIZE dma_get_cache_alignment()
	#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)

	#define MPSC_TXR_ENTRIES 32
	#define MPSC_TXRE_SIZE dma_get_cache_alignment()
	#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
	#define MPSC_TXBE_SIZE dma_get_cache_alignment()
	#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)

	#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \
	MPSC_TXR_SIZE + MPSC_TXB_SIZE + \
	dma_get_cache_alignment() /* for alignment */)

	/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
	struct mpsc_rx_desc {
	u16 bufsize;
	u16 bytecnt;
	u32 cmdstat;
	u32 link;
	u32 buf_ptr;
	} __attribute((packed));

	struct mpsc_tx_desc {
	u16 bytecnt;
	u16 shadow;
	u32 cmdstat;
	u32 link;
	u32 buf_ptr;
	} __attribute((packed));

	/*
	* Some regs that have the erratum that you can't read them are are shared
	* between the two MPSC controllers. This struct contains those shared regs.
	*/
	struct mpsc_shared_regs {
	phys_addr_t mpsc_routing_base_p;
	phys_addr_t sdma_intr_base_p;

	void *mpsc_routing_base;
	void *sdma_intr_base;

	u32 MPSC_MRR_m;
	u32 MPSC_RCRR_m;
	u32 MPSC_TCRR_m;
	u32 SDMA_INTR_CAUSE_m;
	u32 SDMA_INTR_MASK_m;
	};

	/* The main driver data structure */
	struct mpsc_port_info {
	struct uart_port port; /* Overlay uart_port structure */

	/* Internal driver state for this ctlr */
	u8 ready;
	u8 rcv_data;
	tcflag_t c_iflag; /* save termios->c_iflag */
	tcflag_t c_cflag; /* save termios->c_cflag */

	/* Info passed in from platform */
	u8 mirror_regs; /* Need to mirror regs? */
	u8 cache_mgmt; /* Need manual cache mgmt? */
	u8 brg_can_tune; /* BRG has baud tuning? */
	u32 brg_clk_src;
	u16 mpsc_max_idle;
	int default_baud;
	int default_bits;
	int default_parity;
	int default_flow;

	/* Physical addresses of various blocks of registers (from platform) */
	phys_addr_t mpsc_base_p;
	phys_addr_t sdma_base_p;
	phys_addr_t brg_base_p;

	/* Virtual addresses of various blocks of registers (from platform) */
	void *mpsc_base;
	void *sdma_base;
	void *brg_base;

	/* Descriptor ring and buffer allocations */
	void *dma_region;
	dma_addr_t dma_region_p;

	dma_addr_t rxr; /* Rx descriptor ring */
	dma_addr_t rxr_p; /* Phys addr of rxr */
	u8 rxb; / Rx Ring I/O buf */
	u8 rxb_p; / Phys addr of rxb */
	u32 rxr_posn; /* First desc w/ Rx data */

	dma_addr_t txr; /* Tx descriptor ring */
	dma_addr_t txr_p; /* Phys addr of txr */
	u8 txb; / Tx Ring I/O buf */
	u8 txb_p; / Phys addr of txb */
	int txr_head; /* Where new data goes */
	int txr_tail; /* Where sent data comes off */

	/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
	u32 MPSC_MPCR_m;
	u32 MPSC_CHR_1_m;
	u32 MPSC_CHR_2_m;
	u32 MPSC_CHR_10_m;
	u32 BRG_BCR_m;
	struct mpsc_shared_regs *shared_regs;
	};

	/* Hooks to platform-specific code */
	int mpsc_platform_register_driver(void);
	void mpsc_platform_unregister_driver(void);

	/* Hooks back in to mpsc common to be called by platform-specific code */
	struct mpsc_port_info *mpsc_device_probe(int index);
	struct mpsc_port_info *mpsc_device_remove(int index);

	/*
	*****************************************************************************
	*
	* Multi-Protocol Serial Controller Interface Registers
	*
	*****************************************************************************
	*/

	/* Main Configuratino Register Offsets */
	#define MPSC_MMCRL 0x0000
	#define MPSC_MMCRH 0x0004
	#define MPSC_MPCR 0x0008
	#define MPSC_CHR_1 0x000c
	#define MPSC_CHR_2 0x0010
	#define MPSC_CHR_3 0x0014
	#define MPSC_CHR_4 0x0018
	#define MPSC_CHR_5 0x001c
	#define MPSC_CHR_6 0x0020
	#define MPSC_CHR_7 0x0024
	#define MPSC_CHR_8 0x0028
	#define MPSC_CHR_9 0x002c
	#define MPSC_CHR_10 0x0030
	#define MPSC_CHR_11 0x0034

	#define MPSC_MPCR_FRZ (1 << 9)
	#define MPSC_MPCR_CL_5 0
	#define MPSC_MPCR_CL_6 1
	#define MPSC_MPCR_CL_7 2
	#define MPSC_MPCR_CL_8 3
	#define MPSC_MPCR_SBL_1 0
	#define MPSC_MPCR_SBL_2 1

	#define MPSC_CHR_2_TEV (1<<1)
	#define MPSC_CHR_2_TA (1<<7)
	#define MPSC_CHR_2_TTCS (1<<9)
	#define MPSC_CHR_2_REV (1<<17)
	#define MPSC_CHR_2_RA (1<<23)
	#define MPSC_CHR_2_CRD (1<<25)
	#define MPSC_CHR_2_EH (1<<31)
	#define MPSC_CHR_2_PAR_ODD 0
	#define MPSC_CHR_2_PAR_SPACE 1
	#define MPSC_CHR_2_PAR_EVEN 2
	#define MPSC_CHR_2_PAR_MARK 3

	/* MPSC Signal Routing */
	#define MPSC_MRR 0x0000
	#define MPSC_RCRR 0x0004
	#define MPSC_TCRR 0x0008

	/*
	*****************************************************************************
	*
	* Serial DMA Controller Interface Registers
	*
	*****************************************************************************
	*/

	#define SDMA_SDC 0x0000
	#define SDMA_SDCM 0x0008
	#define SDMA_RX_DESC 0x0800
	#define SDMA_RX_BUF_PTR 0x0808
	#define SDMA_SCRDP 0x0810
	#define SDMA_TX_DESC 0x0c00
	#define SDMA_SCTDP 0x0c10
	#define SDMA_SFTDP 0x0c14

	#define SDMA_DESC_CMDSTAT_PE (1<<0)
	#define SDMA_DESC_CMDSTAT_CDL (1<<1)
	#define SDMA_DESC_CMDSTAT_FR (1<<3)
	#define SDMA_DESC_CMDSTAT_OR (1<<6)
	#define SDMA_DESC_CMDSTAT_BR (1<<9)
	#define SDMA_DESC_CMDSTAT_MI (1<<10)
	#define SDMA_DESC_CMDSTAT_A (1<<11)
	#define SDMA_DESC_CMDSTAT_AM (1<<12)
	#define SDMA_DESC_CMDSTAT_CT (1<<13)
	#define SDMA_DESC_CMDSTAT_C (1<<14)
	#define SDMA_DESC_CMDSTAT_ES (1<<15)
	#define SDMA_DESC_CMDSTAT_L (1<<16)
	#define SDMA_DESC_CMDSTAT_F (1<<17)
	#define SDMA_DESC_CMDSTAT_P (1<<18)
	#define SDMA_DESC_CMDSTAT_EI (1<<23)
	#define SDMA_DESC_CMDSTAT_O (1<<31)

	#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \| \
	SDMA_DESC_CMDSTAT_EI)

	#define SDMA_SDC_RFT (1<<0)
	#define SDMA_SDC_SFM (1<<1)
	#define SDMA_SDC_BLMR (1<<6)
	#define SDMA_SDC_BLMT (1<<7)
	#define SDMA_SDC_POVR (1<<8)
	#define SDMA_SDC_RIFB (1<<9)

	#define SDMA_SDCM_ERD (1<<7)
	#define SDMA_SDCM_AR (1<<15)
	#define SDMA_SDCM_STD (1<<16)
	#define SDMA_SDCM_TXD (1<<23)
	#define SDMA_SDCM_AT (1<<31)

	#define SDMA_0_CAUSE_RXBUF (1<<0)
	#define SDMA_0_CAUSE_RXERR (1<<1)
	#define SDMA_0_CAUSE_TXBUF (1<<2)
	#define SDMA_0_CAUSE_TXEND (1<<3)
	#define SDMA_1_CAUSE_RXBUF (1<<8)
	#define SDMA_1_CAUSE_RXERR (1<<9)
	#define SDMA_1_CAUSE_TXBUF (1<<10)
	#define SDMA_1_CAUSE_TXEND (1<<11)

	#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF \| SDMA_0_CAUSE_RXERR \| \
	SDMA_1_CAUSE_RXBUF \| SDMA_1_CAUSE_RXERR)
	#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF \| SDMA_0_CAUSE_TXEND \| \
	SDMA_1_CAUSE_TXBUF \| SDMA_1_CAUSE_TXEND)

	/* SDMA Interrupt registers */
	#define SDMA_INTR_CAUSE 0x0000
	#define SDMA_INTR_MASK 0x0080

	/*
	*****************************************************************************
	*
	* Baud Rate Generator Interface Registers
	*
	*****************************************************************************
	*/

	#define BRG_BCR 0x0000
	#define BRG_BTR 0x0004

	#endif /* __MPSC_H__ */