| /** |
| * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Keshava Munegowda <keshava_mgowda@ti.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/spinlock.h> |
| #include <linux/gpio.h> |
| #include <plat/usb.h> |
| |
| #define USBHS_DRIVER_NAME "usbhs-omap" |
| #define OMAP_EHCI_DEVICE "ehci-omap" |
| #define OMAP_OHCI_DEVICE "ohci-omap3" |
| |
| /* OMAP USBHOST Register addresses */ |
| |
| /* TLL Register Set */ |
| #define OMAP_USBTLL_REVISION (0x00) |
| #define OMAP_USBTLL_SYSCONFIG (0x10) |
| #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) |
| #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) |
| #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) |
| #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) |
| #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) |
| |
| #define OMAP_USBTLL_SYSSTATUS (0x14) |
| #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) |
| |
| #define OMAP_USBTLL_IRQSTATUS (0x18) |
| #define OMAP_USBTLL_IRQENABLE (0x1C) |
| |
| #define OMAP_TLL_SHARED_CONF (0x30) |
| #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) |
| #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) |
| #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) |
| #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) |
| #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) |
| |
| #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) |
| #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 |
| #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) |
| #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) |
| #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) |
| #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) |
| #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) |
| #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) |
| |
| #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 |
| #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 |
| #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 |
| #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 |
| #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 |
| #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 |
| #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 |
| #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 |
| #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA |
| #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB |
| |
| #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) |
| #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) |
| #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) |
| #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) |
| #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) |
| #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) |
| #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) |
| #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) |
| #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) |
| |
| #define OMAP_TLL_CHANNEL_COUNT 3 |
| #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) |
| #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) |
| #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) |
| |
| /* UHH Register Set */ |
| #define OMAP_UHH_REVISION (0x00) |
| #define OMAP_UHH_SYSCONFIG (0x10) |
| #define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) |
| #define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) |
| #define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) |
| #define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) |
| #define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) |
| #define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) |
| |
| #define OMAP_UHH_SYSSTATUS (0x14) |
| #define OMAP_UHH_HOSTCONFIG (0x40) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) |
| #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) |
| #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) |
| #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) |
| #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) |
| #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) |
| #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) |
| #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) |
| #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) |
| |
| /* OMAP4-specific defines */ |
| #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) |
| #define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) |
| #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) |
| #define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) |
| #define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) |
| |
| #define OMAP4_P1_MODE_CLEAR (3 << 16) |
| #define OMAP4_P1_MODE_TLL (1 << 16) |
| #define OMAP4_P1_MODE_HSIC (3 << 16) |
| #define OMAP4_P2_MODE_CLEAR (3 << 18) |
| #define OMAP4_P2_MODE_TLL (1 << 18) |
| #define OMAP4_P2_MODE_HSIC (3 << 18) |
| |
| #define OMAP_REV2_TLL_CHANNEL_COUNT 2 |
| |
| #define OMAP_UHH_DEBUG_CSR (0x44) |
| |
| /* Values of UHH_REVISION - Note: these are not given in the TRM */ |
| #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ |
| #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ |
| |
| #define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) |
| #define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) |
| |
| #define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) |
| #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) |
| #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) |
| |
| |
| struct usbhs_hcd_omap { |
| struct clk *usbhost_ick; |
| struct clk *usbhost_hs_fck; |
| struct clk *usbhost_fs_fck; |
| struct clk *xclk60mhsp1_ck; |
| struct clk *xclk60mhsp2_ck; |
| struct clk *utmi_p1_fck; |
| struct clk *usbhost_p1_fck; |
| struct clk *usbtll_p1_fck; |
| struct clk *utmi_p2_fck; |
| struct clk *usbhost_p2_fck; |
| struct clk *usbtll_p2_fck; |
| struct clk *init_60m_fclk; |
| struct clk *usbtll_fck; |
| struct clk *usbtll_ick; |
| |
| void __iomem *uhh_base; |
| void __iomem *tll_base; |
| |
| struct usbhs_omap_platform_data platdata; |
| |
| u32 usbhs_rev; |
| spinlock_t lock; |
| int count; |
| }; |
| /*-------------------------------------------------------------------------*/ |
| |
| const char usbhs_driver_name[] = USBHS_DRIVER_NAME; |
| static u64 usbhs_dmamask = ~(u32)0; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) |
| { |
| __raw_writel(val, base + reg); |
| } |
| |
| static inline u32 usbhs_read(void __iomem *base, u32 reg) |
| { |
| return __raw_readl(base + reg); |
| } |
| |
| static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) |
| { |
| __raw_writeb(val, base + reg); |
| } |
| |
| static inline u8 usbhs_readb(void __iomem *base, u8 reg) |
| { |
| return __raw_readb(base + reg); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct platform_device *omap_usbhs_alloc_child(const char *name, |
| struct resource *res, int num_resources, void *pdata, |
| size_t pdata_size, struct device *dev) |
| { |
| struct platform_device *child; |
| int ret; |
| |
| child = platform_device_alloc(name, 0); |
| |
| if (!child) { |
| dev_err(dev, "platform_device_alloc %s failed\n", name); |
| goto err_end; |
| } |
| |
| ret = platform_device_add_resources(child, res, num_resources); |
| if (ret) { |
| dev_err(dev, "platform_device_add_resources failed\n"); |
| goto err_alloc; |
| } |
| |
| ret = platform_device_add_data(child, pdata, pdata_size); |
| if (ret) { |
| dev_err(dev, "platform_device_add_data failed\n"); |
| goto err_alloc; |
| } |
| |
| child->dev.dma_mask = &usbhs_dmamask; |
| child->dev.coherent_dma_mask = 0xffffffff; |
| child->dev.parent = dev; |
| |
| ret = platform_device_add(child); |
| if (ret) { |
| dev_err(dev, "platform_device_add failed\n"); |
| goto err_alloc; |
| } |
| |
| return child; |
| |
| err_alloc: |
| platform_device_put(child); |
| |
| err_end: |
| return NULL; |
| } |
| |
| static int omap_usbhs_alloc_children(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct usbhs_hcd_omap *omap; |
| struct ehci_hcd_omap_platform_data *ehci_data; |
| struct ohci_hcd_omap_platform_data *ohci_data; |
| struct platform_device *ehci; |
| struct platform_device *ohci; |
| struct resource *res; |
| struct resource resources[2]; |
| int ret; |
| |
| omap = platform_get_drvdata(pdev); |
| ehci_data = omap->platdata.ehci_data; |
| ohci_data = omap->platdata.ohci_data; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); |
| if (!res) { |
| dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); |
| ret = -ENODEV; |
| goto err_end; |
| } |
| resources[0] = *res; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); |
| if (!res) { |
| dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); |
| ret = -ENODEV; |
| goto err_end; |
| } |
| resources[1] = *res; |
| |
| ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, |
| sizeof(*ehci_data), dev); |
| |
| if (!ehci) { |
| dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
| ret = -ENOMEM; |
| goto err_end; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); |
| if (!res) { |
| dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); |
| ret = -ENODEV; |
| goto err_ehci; |
| } |
| resources[0] = *res; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); |
| if (!res) { |
| dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); |
| ret = -ENODEV; |
| goto err_ehci; |
| } |
| resources[1] = *res; |
| |
| ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, |
| sizeof(*ohci_data), dev); |
| if (!ohci) { |
| dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
| ret = -ENOMEM; |
| goto err_ehci; |
| } |
| |
| return 0; |
| |
| err_ehci: |
| platform_device_unregister(ehci); |
| |
| err_end: |
| return ret; |
| } |
| |
| /** |
| * usbhs_omap_probe - initialize TI-based HCDs |
| * |
| * Allocates basic resources for this USB host controller. |
| */ |
| static int __devinit usbhs_omap_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct usbhs_omap_platform_data *pdata = dev->platform_data; |
| struct usbhs_hcd_omap *omap; |
| struct resource *res; |
| int ret = 0; |
| int i; |
| |
| if (!pdata) { |
| dev_err(dev, "Missing platform data\n"); |
| ret = -ENOMEM; |
| goto end_probe; |
| } |
| |
| omap = kzalloc(sizeof(*omap), GFP_KERNEL); |
| if (!omap) { |
| dev_err(dev, "Memory allocation failed\n"); |
| ret = -ENOMEM; |
| goto end_probe; |
| } |
| |
| spin_lock_init(&omap->lock); |
| |
| for (i = 0; i < OMAP3_HS_USB_PORTS; i++) |
| omap->platdata.port_mode[i] = pdata->port_mode[i]; |
| |
| omap->platdata.ehci_data = pdata->ehci_data; |
| omap->platdata.ohci_data = pdata->ohci_data; |
| |
| omap->usbhost_ick = clk_get(dev, "usbhost_ick"); |
| if (IS_ERR(omap->usbhost_ick)) { |
| ret = PTR_ERR(omap->usbhost_ick); |
| dev_err(dev, "usbhost_ick failed error:%d\n", ret); |
| goto err_end; |
| } |
| |
| omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); |
| if (IS_ERR(omap->usbhost_hs_fck)) { |
| ret = PTR_ERR(omap->usbhost_hs_fck); |
| dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); |
| goto err_usbhost_ick; |
| } |
| |
| omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); |
| if (IS_ERR(omap->usbhost_fs_fck)) { |
| ret = PTR_ERR(omap->usbhost_fs_fck); |
| dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); |
| goto err_usbhost_hs_fck; |
| } |
| |
| omap->usbtll_fck = clk_get(dev, "usbtll_fck"); |
| if (IS_ERR(omap->usbtll_fck)) { |
| ret = PTR_ERR(omap->usbtll_fck); |
| dev_err(dev, "usbtll_fck failed error:%d\n", ret); |
| goto err_usbhost_fs_fck; |
| } |
| |
| omap->usbtll_ick = clk_get(dev, "usbtll_ick"); |
| if (IS_ERR(omap->usbtll_ick)) { |
| ret = PTR_ERR(omap->usbtll_ick); |
| dev_err(dev, "usbtll_ick failed error:%d\n", ret); |
| goto err_usbtll_fck; |
| } |
| |
| omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); |
| if (IS_ERR(omap->utmi_p1_fck)) { |
| ret = PTR_ERR(omap->utmi_p1_fck); |
| dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); |
| goto err_usbtll_ick; |
| } |
| |
| omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); |
| if (IS_ERR(omap->xclk60mhsp1_ck)) { |
| ret = PTR_ERR(omap->xclk60mhsp1_ck); |
| dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); |
| goto err_utmi_p1_fck; |
| } |
| |
| omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); |
| if (IS_ERR(omap->utmi_p2_fck)) { |
| ret = PTR_ERR(omap->utmi_p2_fck); |
| dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); |
| goto err_xclk60mhsp1_ck; |
| } |
| |
| omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); |
| if (IS_ERR(omap->xclk60mhsp2_ck)) { |
| ret = PTR_ERR(omap->xclk60mhsp2_ck); |
| dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); |
| goto err_utmi_p2_fck; |
| } |
| |
| omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); |
| if (IS_ERR(omap->usbhost_p1_fck)) { |
| ret = PTR_ERR(omap->usbhost_p1_fck); |
| dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); |
| goto err_xclk60mhsp2_ck; |
| } |
| |
| omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); |
| if (IS_ERR(omap->usbtll_p1_fck)) { |
| ret = PTR_ERR(omap->usbtll_p1_fck); |
| dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); |
| goto err_usbhost_p1_fck; |
| } |
| |
| omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); |
| if (IS_ERR(omap->usbhost_p2_fck)) { |
| ret = PTR_ERR(omap->usbhost_p2_fck); |
| dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); |
| goto err_usbtll_p1_fck; |
| } |
| |
| omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); |
| if (IS_ERR(omap->usbtll_p2_fck)) { |
| ret = PTR_ERR(omap->usbtll_p2_fck); |
| dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); |
| goto err_usbhost_p2_fck; |
| } |
| |
| omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); |
| if (IS_ERR(omap->init_60m_fclk)) { |
| ret = PTR_ERR(omap->init_60m_fclk); |
| dev_err(dev, "init_60m_fclk failed error:%d\n", ret); |
| goto err_usbtll_p2_fck; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); |
| if (!res) { |
| dev_err(dev, "UHH EHCI get resource failed\n"); |
| ret = -ENODEV; |
| goto err_init_60m_fclk; |
| } |
| |
| omap->uhh_base = ioremap(res->start, resource_size(res)); |
| if (!omap->uhh_base) { |
| dev_err(dev, "UHH ioremap failed\n"); |
| ret = -ENOMEM; |
| goto err_init_60m_fclk; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); |
| if (!res) { |
| dev_err(dev, "UHH EHCI get resource failed\n"); |
| ret = -ENODEV; |
| goto err_tll; |
| } |
| |
| omap->tll_base = ioremap(res->start, resource_size(res)); |
| if (!omap->tll_base) { |
| dev_err(dev, "TLL ioremap failed\n"); |
| ret = -ENOMEM; |
| goto err_tll; |
| } |
| |
| platform_set_drvdata(pdev, omap); |
| |
| ret = omap_usbhs_alloc_children(pdev); |
| if (ret) { |
| dev_err(dev, "omap_usbhs_alloc_children failed\n"); |
| goto err_alloc; |
| } |
| |
| goto end_probe; |
| |
| err_alloc: |
| iounmap(omap->tll_base); |
| |
| err_tll: |
| iounmap(omap->uhh_base); |
| |
| err_init_60m_fclk: |
| clk_put(omap->init_60m_fclk); |
| |
| err_usbtll_p2_fck: |
| clk_put(omap->usbtll_p2_fck); |
| |
| err_usbhost_p2_fck: |
| clk_put(omap->usbhost_p2_fck); |
| |
| err_usbtll_p1_fck: |
| clk_put(omap->usbtll_p1_fck); |
| |
| err_usbhost_p1_fck: |
| clk_put(omap->usbhost_p1_fck); |
| |
| err_xclk60mhsp2_ck: |
| clk_put(omap->xclk60mhsp2_ck); |
| |
| err_utmi_p2_fck: |
| clk_put(omap->utmi_p2_fck); |
| |
| err_xclk60mhsp1_ck: |
| clk_put(omap->xclk60mhsp1_ck); |
| |
| err_utmi_p1_fck: |
| clk_put(omap->utmi_p1_fck); |
| |
| err_usbtll_ick: |
| clk_put(omap->usbtll_ick); |
| |
| err_usbtll_fck: |
| clk_put(omap->usbtll_fck); |
| |
| err_usbhost_fs_fck: |
| clk_put(omap->usbhost_fs_fck); |
| |
| err_usbhost_hs_fck: |
| clk_put(omap->usbhost_hs_fck); |
| |
| err_usbhost_ick: |
| clk_put(omap->usbhost_ick); |
| |
| err_end: |
| kfree(omap); |
| |
| end_probe: |
| return ret; |
| } |
| |
| /** |
| * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs |
| * @pdev: USB Host Controller being removed |
| * |
| * Reverses the effect of usbhs_omap_probe(). |
| */ |
| static int __devexit usbhs_omap_remove(struct platform_device *pdev) |
| { |
| struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); |
| |
| if (omap->count != 0) { |
| dev_err(&pdev->dev, |
| "Either EHCI or OHCI is still using usbhs core\n"); |
| return -EBUSY; |
| } |
| |
| iounmap(omap->tll_base); |
| iounmap(omap->uhh_base); |
| clk_put(omap->init_60m_fclk); |
| clk_put(omap->usbtll_p2_fck); |
| clk_put(omap->usbhost_p2_fck); |
| clk_put(omap->usbtll_p1_fck); |
| clk_put(omap->usbhost_p1_fck); |
| clk_put(omap->xclk60mhsp2_ck); |
| clk_put(omap->utmi_p2_fck); |
| clk_put(omap->xclk60mhsp1_ck); |
| clk_put(omap->utmi_p1_fck); |
| clk_put(omap->usbtll_ick); |
| clk_put(omap->usbtll_fck); |
| clk_put(omap->usbhost_fs_fck); |
| clk_put(omap->usbhost_hs_fck); |
| clk_put(omap->usbhost_ick); |
| kfree(omap); |
| |
| return 0; |
| } |
| |
| static bool is_ohci_port(enum usbhs_omap_port_mode pmode) |
| { |
| switch (pmode) { |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * convert the port-mode enum to a value we can use in the FSLSMODE |
| * field of USBTLL_CHANNEL_CONF |
| */ |
| static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) |
| { |
| switch (mode) { |
| case OMAP_USBHS_PORT_MODE_UNUSED: |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; |
| |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; |
| |
| case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| return OMAP_TLL_FSLSMODE_3PIN_PHY; |
| |
| case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| return OMAP_TLL_FSLSMODE_4PIN_PHY; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| return OMAP_TLL_FSLSMODE_3PIN_TLL; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| return OMAP_TLL_FSLSMODE_4PIN_TLL; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; |
| |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; |
| default: |
| pr_warning("Invalid port mode, using default\n"); |
| return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; |
| } |
| } |
| |
| static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| struct usbhs_omap_platform_data *pdata = dev->platform_data; |
| unsigned reg; |
| int i; |
| |
| /* Program Common TLL register */ |
| reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); |
| reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON |
| | OMAP_TLL_SHARED_CONF_USB_DIVRATION); |
| reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; |
| reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; |
| |
| usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); |
| |
| /* Enable channels now */ |
| for (i = 0; i < tll_channel_count; i++) { |
| reg = usbhs_read(omap->tll_base, |
| OMAP_TLL_CHANNEL_CONF(i)); |
| |
| if (is_ohci_port(pdata->port_mode[i])) { |
| reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) |
| << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; |
| reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; |
| } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { |
| |
| /* Disable AutoIdle, BitStuffing and use SDR Mode */ |
| reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE |
| | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF |
| | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); |
| |
| } else |
| continue; |
| |
| reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; |
| usbhs_write(omap->tll_base, |
| OMAP_TLL_CHANNEL_CONF(i), reg); |
| |
| usbhs_writeb(omap->tll_base, |
| OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); |
| } |
| } |
| |
| static int usbhs_enable(struct device *dev) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| struct usbhs_omap_platform_data *pdata = &omap->platdata; |
| unsigned long flags = 0; |
| int ret = 0; |
| unsigned long timeout; |
| unsigned reg; |
| |
| dev_dbg(dev, "starting TI HSUSB Controller\n"); |
| if (!pdata) { |
| dev_dbg(dev, "missing platform_data\n"); |
| return -ENODEV; |
| } |
| |
| spin_lock_irqsave(&omap->lock, flags); |
| if (omap->count > 0) |
| goto end_count; |
| |
| clk_enable(omap->usbhost_ick); |
| clk_enable(omap->usbhost_hs_fck); |
| clk_enable(omap->usbhost_fs_fck); |
| clk_enable(omap->usbtll_fck); |
| clk_enable(omap->usbtll_ick); |
| |
| if (pdata->ehci_data->phy_reset) { |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { |
| gpio_request(pdata->ehci_data->reset_gpio_port[0], |
| "USB1 PHY reset"); |
| gpio_direction_output |
| (pdata->ehci_data->reset_gpio_port[0], 0); |
| } |
| |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) { |
| gpio_request(pdata->ehci_data->reset_gpio_port[1], |
| "USB2 PHY reset"); |
| gpio_direction_output |
| (pdata->ehci_data->reset_gpio_port[1], 0); |
| } |
| |
| /* Hold the PHY in RESET for enough time till DIR is high */ |
| udelay(10); |
| } |
| |
| omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); |
| dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); |
| |
| /* perform TLL soft reset, and wait until reset is complete */ |
| usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, |
| OMAP_USBTLL_SYSCONFIG_SOFTRESET); |
| |
| /* Wait for TLL reset to complete */ |
| timeout = jiffies + msecs_to_jiffies(1000); |
| while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) |
| & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { |
| cpu_relax(); |
| |
| if (time_after(jiffies, timeout)) { |
| dev_dbg(dev, "operation timed out\n"); |
| ret = -EINVAL; |
| goto err_tll; |
| } |
| } |
| dev_dbg(dev, "TLL RESET DONE\n"); |
| |
| /* (1<<3) = no idle mode only for initial debugging */ |
| usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, |
| OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | |
| OMAP_USBTLL_SYSCONFIG_SIDLEMODE | |
| OMAP_USBTLL_SYSCONFIG_AUTOIDLE); |
| |
| /* Put UHH in NoIdle/NoStandby mode */ |
| reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); |
| if (is_omap_usbhs_rev1(omap)) { |
| reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP |
| | OMAP_UHH_SYSCONFIG_SIDLEMODE |
| | OMAP_UHH_SYSCONFIG_CACTIVITY |
| | OMAP_UHH_SYSCONFIG_MIDLEMODE); |
| reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; |
| } else if (is_omap_usbhs_rev2(omap)) { |
| reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; |
| reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; |
| reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; |
| reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; |
| } |
| |
| usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); |
| |
| reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); |
| /* setup ULPI bypass and burst configurations */ |
| reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN |
| | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN |
| | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); |
| reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; |
| reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; |
| |
| if (is_omap_usbhs_rev1(omap)) { |
| if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) |
| reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; |
| if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) |
| reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; |
| if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) |
| reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; |
| |
| /* Bypass the TLL module for PHY mode operation */ |
| if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { |
| dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); |
| if (is_ehci_phy_mode(pdata->port_mode[0]) || |
| is_ehci_phy_mode(pdata->port_mode[1]) || |
| is_ehci_phy_mode(pdata->port_mode[2])) |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| else |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| } else { |
| dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); |
| if (is_ehci_phy_mode(pdata->port_mode[0])) |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| else |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| if (is_ehci_phy_mode(pdata->port_mode[1])) |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; |
| else |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; |
| if (is_ehci_phy_mode(pdata->port_mode[2])) |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; |
| else |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; |
| } |
| } else if (is_omap_usbhs_rev2(omap)) { |
| /* Clear port mode fields for PHY mode*/ |
| reg &= ~OMAP4_P1_MODE_CLEAR; |
| reg &= ~OMAP4_P2_MODE_CLEAR; |
| |
| if (is_ehci_phy_mode(pdata->port_mode[0])) { |
| ret = clk_set_parent(omap->utmi_p1_fck, |
| omap->xclk60mhsp1_ck); |
| if (ret != 0) { |
| dev_err(dev, "xclk60mhsp1_ck set parent" |
| "failed error:%d\n", ret); |
| goto err_tll; |
| } |
| } else if (is_ehci_tll_mode(pdata->port_mode[0])) { |
| ret = clk_set_parent(omap->utmi_p1_fck, |
| omap->init_60m_fclk); |
| if (ret != 0) { |
| dev_err(dev, "init_60m_fclk set parent" |
| "failed error:%d\n", ret); |
| goto err_tll; |
| } |
| clk_enable(omap->usbhost_p1_fck); |
| clk_enable(omap->usbtll_p1_fck); |
| } |
| |
| if (is_ehci_phy_mode(pdata->port_mode[1])) { |
| ret = clk_set_parent(omap->utmi_p2_fck, |
| omap->xclk60mhsp2_ck); |
| if (ret != 0) { |
| dev_err(dev, "xclk60mhsp1_ck set parent" |
| "failed error:%d\n", ret); |
| goto err_tll; |
| } |
| } else if (is_ehci_tll_mode(pdata->port_mode[1])) { |
| ret = clk_set_parent(omap->utmi_p2_fck, |
| omap->init_60m_fclk); |
| if (ret != 0) { |
| dev_err(dev, "init_60m_fclk set parent" |
| "failed error:%d\n", ret); |
| goto err_tll; |
| } |
| clk_enable(omap->usbhost_p2_fck); |
| clk_enable(omap->usbtll_p2_fck); |
| } |
| |
| clk_enable(omap->utmi_p1_fck); |
| clk_enable(omap->utmi_p2_fck); |
| |
| if (is_ehci_tll_mode(pdata->port_mode[0]) || |
| (is_ohci_port(pdata->port_mode[0]))) |
| reg |= OMAP4_P1_MODE_TLL; |
| else if (is_ehci_hsic_mode(pdata->port_mode[0])) |
| reg |= OMAP4_P1_MODE_HSIC; |
| |
| if (is_ehci_tll_mode(pdata->port_mode[1]) || |
| (is_ohci_port(pdata->port_mode[1]))) |
| reg |= OMAP4_P2_MODE_TLL; |
| else if (is_ehci_hsic_mode(pdata->port_mode[1])) |
| reg |= OMAP4_P2_MODE_HSIC; |
| } |
| |
| usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); |
| dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); |
| |
| if (is_ehci_tll_mode(pdata->port_mode[0]) || |
| is_ehci_tll_mode(pdata->port_mode[1]) || |
| is_ehci_tll_mode(pdata->port_mode[2]) || |
| (is_ohci_port(pdata->port_mode[0])) || |
| (is_ohci_port(pdata->port_mode[1])) || |
| (is_ohci_port(pdata->port_mode[2]))) { |
| |
| /* Enable UTMI mode for required TLL channels */ |
| if (is_omap_usbhs_rev2(omap)) |
| usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); |
| else |
| usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); |
| } |
| |
| if (pdata->ehci_data->phy_reset) { |
| /* Hold the PHY in RESET for enough time till |
| * PHY is settled and ready |
| */ |
| udelay(10); |
| |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| gpio_set_value |
| (pdata->ehci_data->reset_gpio_port[0], 1); |
| |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| gpio_set_value |
| (pdata->ehci_data->reset_gpio_port[1], 1); |
| } |
| |
| end_count: |
| omap->count++; |
| spin_unlock_irqrestore(&omap->lock, flags); |
| return 0; |
| |
| err_tll: |
| if (pdata->ehci_data->phy_reset) { |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| gpio_free(pdata->ehci_data->reset_gpio_port[0]); |
| |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| gpio_free(pdata->ehci_data->reset_gpio_port[1]); |
| } |
| |
| clk_disable(omap->usbtll_ick); |
| clk_disable(omap->usbtll_fck); |
| clk_disable(omap->usbhost_fs_fck); |
| clk_disable(omap->usbhost_hs_fck); |
| clk_disable(omap->usbhost_ick); |
| spin_unlock_irqrestore(&omap->lock, flags); |
| return ret; |
| } |
| |
| static void usbhs_disable(struct device *dev) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| struct usbhs_omap_platform_data *pdata = &omap->platdata; |
| unsigned long flags = 0; |
| unsigned long timeout; |
| |
| dev_dbg(dev, "stopping TI HSUSB Controller\n"); |
| |
| spin_lock_irqsave(&omap->lock, flags); |
| |
| if (omap->count == 0) |
| goto end_disble; |
| |
| omap->count--; |
| |
| if (omap->count != 0) |
| goto end_disble; |
| |
| /* Reset OMAP modules for insmod/rmmod to work */ |
| usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, |
| is_omap_usbhs_rev2(omap) ? |
| OMAP4_UHH_SYSCONFIG_SOFTRESET : |
| OMAP_UHH_SYSCONFIG_SOFTRESET); |
| |
| timeout = jiffies + msecs_to_jiffies(100); |
| while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| & (1 << 0))) { |
| cpu_relax(); |
| |
| if (time_after(jiffies, timeout)) |
| dev_dbg(dev, "operation timed out\n"); |
| } |
| |
| while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| & (1 << 1))) { |
| cpu_relax(); |
| |
| if (time_after(jiffies, timeout)) |
| dev_dbg(dev, "operation timed out\n"); |
| } |
| |
| while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) |
| & (1 << 2))) { |
| cpu_relax(); |
| |
| if (time_after(jiffies, timeout)) |
| dev_dbg(dev, "operation timed out\n"); |
| } |
| |
| usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); |
| |
| while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) |
| & (1 << 0))) { |
| cpu_relax(); |
| |
| if (time_after(jiffies, timeout)) |
| dev_dbg(dev, "operation timed out\n"); |
| } |
| |
| if (is_omap_usbhs_rev2(omap)) { |
| if (is_ehci_tll_mode(pdata->port_mode[0])) |
| clk_disable(omap->usbtll_p1_fck); |
| if (is_ehci_tll_mode(pdata->port_mode[1])) |
| clk_disable(omap->usbtll_p2_fck); |
| clk_disable(omap->utmi_p2_fck); |
| clk_disable(omap->utmi_p1_fck); |
| } |
| |
| clk_disable(omap->usbtll_ick); |
| clk_disable(omap->usbtll_fck); |
| clk_disable(omap->usbhost_fs_fck); |
| clk_disable(omap->usbhost_hs_fck); |
| clk_disable(omap->usbhost_ick); |
| |
| /* The gpio_free migh sleep; so unlock the spinlock */ |
| spin_unlock_irqrestore(&omap->lock, flags); |
| |
| if (pdata->ehci_data->phy_reset) { |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) |
| gpio_free(pdata->ehci_data->reset_gpio_port[0]); |
| |
| if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) |
| gpio_free(pdata->ehci_data->reset_gpio_port[1]); |
| } |
| return; |
| |
| end_disble: |
| spin_unlock_irqrestore(&omap->lock, flags); |
| } |
| |
| int omap_usbhs_enable(struct device *dev) |
| { |
| return usbhs_enable(dev->parent); |
| } |
| EXPORT_SYMBOL_GPL(omap_usbhs_enable); |
| |
| void omap_usbhs_disable(struct device *dev) |
| { |
| usbhs_disable(dev->parent); |
| } |
| EXPORT_SYMBOL_GPL(omap_usbhs_disable); |
| |
| static struct platform_driver usbhs_omap_driver = { |
| .driver = { |
| .name = (char *)usbhs_driver_name, |
| .owner = THIS_MODULE, |
| }, |
| .remove = __exit_p(usbhs_omap_remove), |
| }; |
| |
| MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); |
| MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); |
| |
| static int __init omap_usbhs_drvinit(void) |
| { |
| return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); |
| } |
| |
| /* |
| * init before ehci and ohci drivers; |
| * The usbhs core driver should be initialized much before |
| * the omap ehci and ohci probe functions are called. |
| */ |
| fs_initcall(omap_usbhs_drvinit); |
| |
| static void __exit omap_usbhs_drvexit(void) |
| { |
| platform_driver_unregister(&usbhs_omap_driver); |
| } |
| module_exit(omap_usbhs_drvexit); |