| /* |
| * MFD driver for TWL6040 audio device |
| * |
| * Authors: Misael Lopez Cruz <misael.lopez@ti.com> |
| * Jorge Eduardo Candelaria <jorge.candelaria@ti.com> |
| * Peter Ujfalusi <peter.ujfalusi@ti.com> |
| * |
| * Copyright: (C) 2011 Texas Instruments, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/i2c/twl.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/twl6040.h> |
| |
| #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1) |
| |
| int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) |
| { |
| int ret; |
| u8 val = 0; |
| |
| mutex_lock(&twl6040->io_mutex); |
| /* Vibra control registers from cache */ |
| if (unlikely(reg == TWL6040_REG_VIBCTLL || |
| reg == TWL6040_REG_VIBCTLR)) { |
| val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; |
| } else { |
| ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); |
| if (ret < 0) { |
| mutex_unlock(&twl6040->io_mutex); |
| return ret; |
| } |
| } |
| mutex_unlock(&twl6040->io_mutex); |
| |
| return val; |
| } |
| EXPORT_SYMBOL(twl6040_reg_read); |
| |
| int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) |
| { |
| int ret; |
| |
| mutex_lock(&twl6040->io_mutex); |
| ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); |
| /* Cache the vibra control registers */ |
| if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) |
| twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; |
| mutex_unlock(&twl6040->io_mutex); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_reg_write); |
| |
| int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) |
| { |
| int ret; |
| u8 val; |
| |
| mutex_lock(&twl6040->io_mutex); |
| ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); |
| if (ret) |
| goto out; |
| |
| val |= mask; |
| ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); |
| out: |
| mutex_unlock(&twl6040->io_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_set_bits); |
| |
| int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) |
| { |
| int ret; |
| u8 val; |
| |
| mutex_lock(&twl6040->io_mutex); |
| ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); |
| if (ret) |
| goto out; |
| |
| val &= ~mask; |
| ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); |
| out: |
| mutex_unlock(&twl6040->io_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_clear_bits); |
| |
| /* twl6040 codec manual power-up sequence */ |
| static int twl6040_power_up(struct twl6040 *twl6040) |
| { |
| u8 ldoctl, ncpctl, lppllctl; |
| int ret; |
| |
| /* enable high-side LDO, reference system and internal oscillator */ |
| ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| return ret; |
| usleep_range(10000, 10500); |
| |
| /* enable negative charge pump */ |
| ncpctl = TWL6040_NCPENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| if (ret) |
| goto ncp_err; |
| usleep_range(1000, 1500); |
| |
| /* enable low-side LDO */ |
| ldoctl |= TWL6040_LSLDOENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| goto lsldo_err; |
| usleep_range(1000, 1500); |
| |
| /* enable low-power PLL */ |
| lppllctl = TWL6040_LPLLENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| if (ret) |
| goto lppll_err; |
| usleep_range(5000, 5500); |
| |
| /* disable internal oscillator */ |
| ldoctl &= ~TWL6040_OSCENA; |
| ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| if (ret) |
| goto osc_err; |
| |
| return 0; |
| |
| osc_err: |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| lppll_err: |
| ldoctl &= ~TWL6040_LSLDOENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| lsldo_err: |
| ncpctl &= ~TWL6040_NCPENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| ncp_err: |
| ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| |
| return ret; |
| } |
| |
| /* twl6040 manual power-down sequence */ |
| static void twl6040_power_down(struct twl6040 *twl6040) |
| { |
| u8 ncpctl, ldoctl, lppllctl; |
| |
| ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL); |
| ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL); |
| lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); |
| |
| /* enable internal oscillator */ |
| ldoctl |= TWL6040_OSCENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| usleep_range(1000, 1500); |
| |
| /* disable low-power PLL */ |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| |
| /* disable low-side LDO */ |
| ldoctl &= ~TWL6040_LSLDOENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| |
| /* disable negative charge pump */ |
| ncpctl &= ~TWL6040_NCPENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); |
| |
| /* disable high-side LDO, reference system and internal oscillator */ |
| ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); |
| twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); |
| } |
| |
| static irqreturn_t twl6040_naudint_handler(int irq, void *data) |
| { |
| struct twl6040 *twl6040 = data; |
| u8 intid, status; |
| |
| intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); |
| |
| if (intid & TWL6040_READYINT) |
| complete(&twl6040->ready); |
| |
| if (intid & TWL6040_THINT) { |
| status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); |
| if (status & TWL6040_TSHUTDET) { |
| dev_warn(twl6040->dev, |
| "Thermal shutdown, powering-off"); |
| twl6040_power(twl6040, 0); |
| } else { |
| dev_warn(twl6040->dev, |
| "Leaving thermal shutdown, powering-on"); |
| twl6040_power(twl6040, 1); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int twl6040_power_up_completion(struct twl6040 *twl6040, |
| int naudint) |
| { |
| int time_left; |
| u8 intid; |
| |
| time_left = wait_for_completion_timeout(&twl6040->ready, |
| msecs_to_jiffies(144)); |
| if (!time_left) { |
| intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); |
| if (!(intid & TWL6040_READYINT)) { |
| dev_err(twl6040->dev, |
| "timeout waiting for READYINT\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int twl6040_power(struct twl6040 *twl6040, int on) |
| { |
| int audpwron = twl6040->audpwron; |
| int naudint = twl6040->irq; |
| int ret = 0; |
| |
| mutex_lock(&twl6040->mutex); |
| |
| if (on) { |
| /* already powered-up */ |
| if (twl6040->power_count++) |
| goto out; |
| |
| if (gpio_is_valid(audpwron)) { |
| /* use AUDPWRON line */ |
| gpio_set_value(audpwron, 1); |
| /* wait for power-up completion */ |
| ret = twl6040_power_up_completion(twl6040, naudint); |
| if (ret) { |
| dev_err(twl6040->dev, |
| "automatic power-down failed\n"); |
| twl6040->power_count = 0; |
| goto out; |
| } |
| } else { |
| /* use manual power-up sequence */ |
| ret = twl6040_power_up(twl6040); |
| if (ret) { |
| dev_err(twl6040->dev, |
| "manual power-up failed\n"); |
| twl6040->power_count = 0; |
| goto out; |
| } |
| } |
| /* Default PLL configuration after power up */ |
| twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; |
| twl6040->sysclk = 19200000; |
| } else { |
| /* already powered-down */ |
| if (!twl6040->power_count) { |
| dev_err(twl6040->dev, |
| "device is already powered-off\n"); |
| ret = -EPERM; |
| goto out; |
| } |
| |
| if (--twl6040->power_count) |
| goto out; |
| |
| if (gpio_is_valid(audpwron)) { |
| /* use AUDPWRON line */ |
| gpio_set_value(audpwron, 0); |
| |
| /* power-down sequence latency */ |
| usleep_range(500, 700); |
| } else { |
| /* use manual power-down sequence */ |
| twl6040_power_down(twl6040); |
| } |
| twl6040->sysclk = 0; |
| } |
| |
| out: |
| mutex_unlock(&twl6040->mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_power); |
| |
| int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, |
| unsigned int freq_in, unsigned int freq_out) |
| { |
| u8 hppllctl, lppllctl; |
| int ret = 0; |
| |
| mutex_lock(&twl6040->mutex); |
| |
| hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); |
| lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); |
| |
| switch (pll_id) { |
| case TWL6040_SYSCLK_SEL_LPPLL: |
| /* low-power PLL divider */ |
| switch (freq_out) { |
| case 17640000: |
| lppllctl |= TWL6040_LPLLFIN; |
| break; |
| case 19200000: |
| lppllctl &= ~TWL6040_LPLLFIN; |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_out %d not supported\n", freq_out); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| |
| switch (freq_in) { |
| case 32768: |
| lppllctl |= TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| mdelay(5); |
| lppllctl &= ~TWL6040_HPLLSEL; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, |
| lppllctl); |
| hppllctl &= ~TWL6040_HPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, |
| hppllctl); |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_in %d not supported\n", freq_in); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| break; |
| case TWL6040_SYSCLK_SEL_HPPLL: |
| /* high-performance PLL can provide only 19.2 MHz */ |
| if (freq_out != 19200000) { |
| dev_err(twl6040->dev, |
| "freq_out %d not supported\n", freq_out); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| hppllctl &= ~TWL6040_MCLK_MSK; |
| |
| switch (freq_in) { |
| case 12000000: |
| /* PLL enabled, active mode */ |
| hppllctl |= TWL6040_MCLK_12000KHZ | |
| TWL6040_HPLLENA; |
| break; |
| case 19200000: |
| /* |
| * PLL disabled |
| * (enable PLL if MCLK jitter quality |
| * doesn't meet specification) |
| */ |
| hppllctl |= TWL6040_MCLK_19200KHZ; |
| break; |
| case 26000000: |
| /* PLL enabled, active mode */ |
| hppllctl |= TWL6040_MCLK_26000KHZ | |
| TWL6040_HPLLENA; |
| break; |
| case 38400000: |
| /* PLL enabled, active mode */ |
| hppllctl |= TWL6040_MCLK_38400KHZ | |
| TWL6040_HPLLENA; |
| break; |
| default: |
| dev_err(twl6040->dev, |
| "freq_in %d not supported\n", freq_in); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| /* enable clock slicer to ensure input waveform is square */ |
| hppllctl |= TWL6040_HPLLSQRENA; |
| |
| twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl); |
| usleep_range(500, 700); |
| lppllctl |= TWL6040_HPLLSEL; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| lppllctl &= ~TWL6040_LPLLENA; |
| twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); |
| break; |
| default: |
| dev_err(twl6040->dev, "unknown pll id %d\n", pll_id); |
| ret = -EINVAL; |
| goto pll_out; |
| } |
| |
| twl6040->sysclk = freq_out; |
| twl6040->pll = pll_id; |
| |
| pll_out: |
| mutex_unlock(&twl6040->mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(twl6040_set_pll); |
| |
| int twl6040_get_pll(struct twl6040 *twl6040) |
| { |
| if (twl6040->power_count) |
| return twl6040->pll; |
| else |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL(twl6040_get_pll); |
| |
| unsigned int twl6040_get_sysclk(struct twl6040 *twl6040) |
| { |
| return twl6040->sysclk; |
| } |
| EXPORT_SYMBOL(twl6040_get_sysclk); |
| |
| /* Get the combined status of the vibra control register */ |
| int twl6040_get_vibralr_status(struct twl6040 *twl6040) |
| { |
| u8 status; |
| |
| status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1]; |
| status &= (TWL6040_VIBENA | TWL6040_VIBSEL); |
| |
| return status; |
| } |
| EXPORT_SYMBOL(twl6040_get_vibralr_status); |
| |
| static struct resource twl6040_vibra_rsrc[] = { |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource twl6040_codec_rsrc[] = { |
| { |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static int __devinit twl6040_probe(struct platform_device *pdev) |
| { |
| struct twl4030_audio_data *pdata = pdev->dev.platform_data; |
| struct twl6040 *twl6040; |
| struct mfd_cell *cell = NULL; |
| int ret, children = 0; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "Platform data is missing\n"); |
| return -EINVAL; |
| } |
| |
| /* In order to operate correctly we need valid interrupt config */ |
| if (!pdata->naudint_irq || !pdata->irq_base) { |
| dev_err(&pdev->dev, "Invalid IRQ configuration\n"); |
| return -EINVAL; |
| } |
| |
| twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); |
| if (!twl6040) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, twl6040); |
| |
| twl6040->dev = &pdev->dev; |
| twl6040->irq = pdata->naudint_irq; |
| twl6040->irq_base = pdata->irq_base; |
| strncpy(twl6040->platform_card_name, pdata->audio_card_name, |
| sizeof twl6040->platform_card_name - 1); |
| twl6040->platform_card_name[sizeof twl6040->platform_card_name - 1] = |
| '\0'; |
| |
| mutex_init(&twl6040->mutex); |
| mutex_init(&twl6040->io_mutex); |
| init_completion(&twl6040->ready); |
| |
| twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); |
| |
| /* ERRATA: Automatic power-up is not possible in ES1.0 */ |
| if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) |
| twl6040->audpwron = pdata->audpwron_gpio; |
| else |
| twl6040->audpwron = -EINVAL; |
| |
| if (gpio_is_valid(twl6040->audpwron)) { |
| ret = gpio_request(twl6040->audpwron, "audpwron"); |
| if (ret) |
| goto gpio1_err; |
| |
| ret = gpio_direction_output(twl6040->audpwron, 0); |
| if (ret) |
| goto gpio2_err; |
| } |
| |
| /* codec interrupt */ |
| ret = twl6040_irq_init(twl6040); |
| if (ret) |
| goto gpio2_err; |
| |
| ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY, |
| NULL, twl6040_naudint_handler, 0, |
| "twl6040_irq_ready", twl6040); |
| if (ret) { |
| dev_err(twl6040->dev, "READY IRQ request failed: %d\n", |
| ret); |
| goto irq_err; |
| } |
| |
| /* dual-access registers controlled by I2C only */ |
| twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL); |
| |
| if (pdata->codec) { |
| int irq = twl6040->irq_base + TWL6040_IRQ_PLUG; |
| |
| cell = &twl6040->cells[children]; |
| cell->name = "twl6040-codec"; |
| twl6040_codec_rsrc[0].start = irq; |
| twl6040_codec_rsrc[0].end = irq; |
| cell->resources = twl6040_codec_rsrc; |
| cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc); |
| cell->platform_data = pdata->codec; |
| cell->pdata_size = sizeof(*pdata->codec); |
| children++; |
| } |
| |
| if (pdata->vibra) { |
| int irq = twl6040->irq_base + TWL6040_IRQ_VIB; |
| |
| cell = &twl6040->cells[children]; |
| cell->name = "twl6040-vibra"; |
| twl6040_vibra_rsrc[0].start = irq; |
| twl6040_vibra_rsrc[0].end = irq; |
| cell->resources = twl6040_vibra_rsrc; |
| cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc); |
| |
| cell->platform_data = pdata->vibra; |
| cell->pdata_size = sizeof(*pdata->vibra); |
| children++; |
| } |
| |
| if (children) { |
| ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, |
| children, NULL, 0); |
| if (ret) |
| goto mfd_err; |
| } else { |
| dev_err(&pdev->dev, "No platform data found for children\n"); |
| ret = -ENODEV; |
| goto mfd_err; |
| } |
| |
| return 0; |
| |
| mfd_err: |
| free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); |
| irq_err: |
| twl6040_irq_exit(twl6040); |
| gpio2_err: |
| if (gpio_is_valid(twl6040->audpwron)) |
| gpio_free(twl6040->audpwron); |
| gpio1_err: |
| platform_set_drvdata(pdev, NULL); |
| kfree(twl6040); |
| return ret; |
| } |
| |
| static int __devexit twl6040_remove(struct platform_device *pdev) |
| { |
| struct twl6040 *twl6040 = platform_get_drvdata(pdev); |
| |
| if (twl6040->power_count) |
| twl6040_power(twl6040, 0); |
| |
| if (gpio_is_valid(twl6040->audpwron)) |
| gpio_free(twl6040->audpwron); |
| |
| free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); |
| twl6040_irq_exit(twl6040); |
| |
| mfd_remove_devices(&pdev->dev); |
| platform_set_drvdata(pdev, NULL); |
| kfree(twl6040); |
| |
| return 0; |
| } |
| |
| static struct platform_driver twl6040_driver = { |
| .probe = twl6040_probe, |
| .remove = __devexit_p(twl6040_remove), |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "twl6040", |
| }, |
| }; |
| |
| static int __devinit twl6040_init(void) |
| { |
| return platform_driver_register(&twl6040_driver); |
| } |
| module_init(twl6040_init); |
| |
| static void __devexit twl6040_exit(void) |
| { |
| platform_driver_unregister(&twl6040_driver); |
| } |
| |
| module_exit(twl6040_exit); |
| |
| MODULE_DESCRIPTION("TWL6040 MFD"); |
| MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); |
| MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:twl6040"); |