config.mk - platform/bootable/diskinstaller - Git at Google

 # note: requires x86 because we assume grub is the mbr bootloader.
 ifeq ($(TARGET_ARCH),x86)
 ifeq ($(TARGET_USE_DISKINSTALLER),true)

 diskinstaller_root := bootable/diskinstaller

 android_sysbase_modules := \
 	libc \
 	libcutils \
 	libdl \
 	liblog \
 	libm \
 	libstdc++ \
 	linker \
 	ash \
 	toolbox \
 	logcat \
 	gdbserver \
 	strace \
 	netcfg
 android_sysbase_files = \
 	$(call module-installed-files,$(android_sysbase_modules))

 # $(1): source base dir
 # $(2): target base dir
 define sysbase-copy-files
 $(hide) $(foreach _f,$(android_sysbase_files), \
 	f=$(patsubst $(1)/%,$(2)/%,$(_f)); \
 	mkdir -p `dirname $$f`; \
 	echo "Copy: $$f" ; \
 	cp -fR $(_f) $$f; \
 )
 endef

 installer_base_modules := \
 	libdiskconfig \
 	libext2fs \
 	libext2_com_err \
 	libext2_e2p \
 	libext2_blkid \
 	libext2_uuid \
 	libext2_profile \
 	badblocks \
 	resize2fs \
 	tune2fs \
 	mke2fs \
 	e2fsck
 installer_base_files = \
 	$(call module-built-files,$(installer_base_modules))

 # $(1): source base dir
 # $(2): target base dir
 define installer-copy-modules
 $(hide) $(foreach m,$(installer_base_modules), \
 	src=$(firstword $(strip $(call module-built-files,$(m)))); \
 	dest=$(patsubst $(strip $(1))/%,$(strip $(2))/%,\
 		$(firstword $(strip $(call module-installed-files,$(m))))); \
 	echo "Copy: $$src -> $$dest"; \
 	mkdir -p `dirname $$dest`; \
 	cp -fdp $$src $$dest; \
 )
 endef

 # Build the installer ramdisk image
 installer_initrc := $(diskinstaller_root)/init.rc
 installer_kernel := $(INSTALLED_KERNEL_TARGET)
 installer_ramdisk := $(TARGET_INSTALLER_OUT)/ramdisk-installer.img
 installer_build_prop := $(INSTALLED_BUILD_PROP_TARGET)
 installer_config := $(diskinstaller_root)/installer.conf
 installer_binary := \
 	$(call intermediates-dir-for,EXECUTABLES,diskinstaller)/diskinstaller

 $(installer_ramdisk): $(diskinstaller_root)/config.mk \
 		$(MKBOOTFS) \
 		$(INSTALLED_RAMDISK_TARGET) \
 		$(INSTALLED_BOOTIMAGE_TARGET) \
 		$(TARGET_DISK_LAYOUT_CONFIG) \
 		$(installer_binary) \
 		$(installer_initrc) \
 		$(installer_kernel) \
 		$(installer_config) \
 		$(android_sysbase_files) \
 		$(installer_base_files) \
 		$(installer_build_prop)
 	@echo ----- Making installer image ------
 	rm -rf $(TARGET_INSTALLER_OUT)
 	mkdir -p $(TARGET_INSTALLER_OUT)
 	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)
 	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)/sbin
 	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)/data
 	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)
 	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)/etc
 	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)/bin
 	@echo Copying baseline ramdisk...
 	cp -fR $(TARGET_ROOT_OUT) $(TARGET_INSTALLER_OUT)
 	@echo Copying sysbase files...
 	$(call sysbase-copy-files,$(TARGET_OUT),$(TARGET_INSTALLER_SYSTEM_OUT))
 	@echo Copying installer base files...
 	$(call installer-copy-modules,$(TARGET_OUT),\
 		$(TARGET_INSTALLER_SYSTEM_OUT))
 	@echo Modifying ramdisk contents...
 	cp -f $(installer_initrc) $(TARGET_INSTALLER_ROOT_OUT)/
 	cp -f $(TARGET_DISK_LAYOUT_CONFIG) \
 		$(TARGET_INSTALLER_SYSTEM_OUT)/etc/disk_layout.conf
 	cp -f $(installer_config) \
 		$(TARGET_INSTALLER_SYSTEM_OUT)/etc/installer.conf
 	cp -f $(installer_binary) $(TARGET_INSTALLER_SYSTEM_OUT)/bin/installer
 	$(hide) chmod ug+rw $(TARGET_INSTALLER_ROOT_OUT)/default.prop
 	cat $(installer_build_prop) >> $(TARGET_INSTALLER_ROOT_OUT)/default.prop
 	$(MKBOOTFS) $(TARGET_INSTALLER_ROOT_OUT) | gzip > $(installer_ramdisk)
 	@echo ----- Made installer ramdisk -[ $@ ]-

 ######################################################################
 # Now the installer boot image which includes the kernel and the ramdisk
 internal_installerimage_args := \
 	--kernel $(installer_kernel) \
 	--ramdisk $(installer_ramdisk)

 internal_installerimage_files := \
 	$(filter-out --%,$(internal_installerimage_args))

 BOARD_INSTALLER_CMDLINE := $(strip $(BOARD_INSTALLER_CMDLINE))
 ifdef BOARD_INSTALLER_CMDLINE
   internal_installerimage_args += --cmdline "$(BOARD_INSTALLER_CMDLINE)"
 endif

 installer_tmp_img := $(TARGET_INSTALLER_OUT)/installer_tmp.img
 tmp_dir_for_inst_image := \
 	$(call intermediates-dir-for,EXECUTABLES,installer_img)/installer_img
 internal_installerimage_args += --tmpdir $(tmp_dir_for_inst_image)
 internal_installerimage_args += --genext2fs $(MKEXT2IMG)
 $(installer_tmp_img): $(MKEXT2IMG) $(internal_installerimage_files)
 	$(call pretty,"Target installer image: $@")
 	$(hide) $(MKEXT2BOOTIMG) $(internal_installerimage_args) --output $@

 ######################################################################
 # Now make a data image that contains all the target image files for the
 # installer.

 bootldr_bin := $(PRODUCT_OUT)/grub/grub.bin
 installer_target_data_files := \
 	$(INSTALLED_BOOTIMAGE_TARGET) \
 	$(INSTALLED_SYSTEMIMAGE) \
 	$(INSTALLED_USERDATAIMAGE_TARGET) \
 	$(bootldr_bin)

 # $(1): src directory
 # $(2): output file
 # $(3): mount point
 # $(4): ext variant (ext2, ext3, ext4)
 # $(5): size of the partition
 define build-installerimage-ext-target
   @mkdir -p $(dir $(2))
     $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$(PATH) \
           $(MKEXTUSERIMG) $(1) $(2) $(4) $(3) $(5)
 endef

 installer_data_img := $(TARGET_INSTALLER_OUT)/installer_data.img
 $(installer_data_img): $(diskinstaller_root)/config.mk \
 			$(installer_target_data_files) \
 			$(MKEXT2IMG) \
 			$(installer_ramdisk)
 	@echo --- Making installer data image ------
 	mkdir -p $(TARGET_INSTALLER_OUT)
 	mkdir -p $(TARGET_INSTALLER_OUT)/data
 	cp -f $(bootldr_bin) $(TARGET_INSTALLER_OUT)/data/bootldr.bin
 	cp -f $(INSTALLED_BOOTIMAGE_TARGET) $(TARGET_INSTALLER_OUT)/data/boot.img
 	cp -f $(INSTALLED_SYSTEMIMAGE) \
 		$(TARGET_INSTALLER_OUT)/data/system.img
 	cp -f $(INSTALLED_USERDATAIMAGE_TARGET) \
 		$(TARGET_INSTALLER_OUT)/data/userdata.img
 	$(call build-installerimage-ext-target,$(TARGET_INSTALLER_OUT)/data,$@, \
 		inst_data,ext4,$(BOARD_INSTALLERIMAGE_PARTITION_SIZE))
 	@echo --- Finished installer data image -[ $@ ]-

 ######################################################################
 # now combine the installer image with the grub bootloader
 grub_bin := $(PRODUCT_OUT)/grub/grub.bin
 installer_layout := $(diskinstaller_root)/installer_img_layout.conf
 edit_mbr := $(HOST_OUT_EXECUTABLES)/editdisklbl

 INSTALLED_DISK_INSTALLER_IMAGE_TARGET := $(PRODUCT_OUT)/installer.img
 $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET): \
 					$(installer_tmp_img) \
 					$(installer_data_img) \
 					$(grub_bin) \
 					$(edit_mbr) \
 					$(installer_layout)
 	@echo "Creating bootable installer image: $@"
 	@rm -f $@
 	$(hide) cat $(grub_bin) > $@
 	$(hide) $(edit_mbr) -l $(installer_layout) -i $@ \
 		inst_boot=$(installer_tmp_img) \
 		inst_data=$(installer_data_img)
 	@echo "Done with bootable installer image -[ $@ ]-"

 #
 # Ditto for the android_system_disk and android_data_disk images
 #

 INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET := $(PRODUCT_OUT)/android_system_disk.img
 android_system_layout := $(diskinstaller_root)/android_img_system_layout.conf

 INSTALLED_ANDROID_IMAGE_DATA_TARGET := $(PRODUCT_OUT)/android_data_disk.img
 android_data_layout := $(diskinstaller_root)/android_img_data_layout.conf

 $(INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET): \
 					$(INSTALLED_SYSTEMIMAGE) \
 					$(INSTALLED_BOOTIMAGE_TARGET) \
 					$(grub_bin) \
 					$(edit_mbr) \
 					$(android_system_layout)
 	@echo "Creating bootable android system-disk image: $@"
 	@rm -f $@
 	$(hide) cat $(grub_bin) > $@
 	$(hide) $(edit_mbr) -l $(android_system_layout) -i $@ \
 		inst_boot=$(INSTALLED_BOOTIMAGE_TARGET) \
 		inst_system=$(INSTALLED_SYSTEMIMAGE)
 	@echo "Done with bootable android system-disk image -[ $@ ]-"

 $(INSTALLED_ANDROID_IMAGE_DATA_TARGET): \
 					$(INSTALLED_USERDATAIMAGE_TARGET) \
 					$(grub_bin) \
 					$(edit_mbr) \
 					$(android_data_layout)
 	@echo "Creating bootable android data-disk image: $@"
 	@rm -f $@
 	$(hide) cat $(grub_bin) > $@
 	$(hide) $(edit_mbr) -l $(android_data_layout) -i $@ \
 		inst_data=$(INSTALLED_USERDATAIMAGE_TARGET) \
 		inst_cache=$(INSTALLED_CACHEIMAGE_TARGET)
 	@echo "Done with bootable android data-disk image -[ $@ ]-"


 ######################################################################
 # now convert the installer_img (disk image) to a VirtualBox image

 INSTALLED_VBOX_INSTALLER_IMAGE_TARGET := $(PRODUCT_OUT)/installer.vdi
 virtual_box_manager := VBoxManage
 # hrd-code the UUID so we don't have to release the disk manually in the VirtualBox manager.
 virtual_box_manager_options := convertfromraw --format VDI
 virtual_box_manager_system_disk_ptions := --uuid "{aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa}"
 virtual_box_manager_data_disk_ptions   := --uuid "{bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb}"

 $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET): $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET)
 	@rm -f $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)
 	$(hide) $(virtual_box_manager) $(virtual_box_manager_options) $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET) $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)
 	@echo "Done with VirtualBox bootable installer image -[ $@ ]-"

 #
 # Ditto for the android_system_disk and android_user_disk images
 #

 INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET := $(PRODUCT_OUT)/android_system_disk.vdi
 $(INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET): $(INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET)
 	@rm -f $@
 	$(hide) $(virtual_box_manager) \
 		$(virtual_box_manager_options) \
 		$(virtual_box_manager_system_disk_ptions) \
 		$^ $@
 	@echo "Done with VirtualBox bootable system-disk image -[ $@ ]-"

 INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET := $(PRODUCT_OUT)/android_data_disk.vdi
 $(INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET): $(INSTALLED_ANDROID_IMAGE_DATA_TARGET)
 	@rm -f $@
 	$(hide) $(virtual_box_manager) \
 		$(virtual_box_manager_options) \
 		$(virtual_box_manager_data_disk_ptions) \
 		$^ $@
 	@echo "Done with VirtualBox bootable data-disk image -[ $@ ]-"

 .PHONY: installer_img
 installer_img: $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET)

 .PHONY: installer_vdi
 installer_vdi: $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)

 .PHONY: android_disk_vdi android_system_disk_vdi android_data_disk_vdi
 android_system_disk_vdi: $(INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET)
 android_data_disk_vdi: $(INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET)
 android_disk_vdi: android_system_disk_vdi android_data_disk_vdi


 else  # ! TARGET_USE_DISKINSTALLER
 INSTALLED_DISK_INSTALLER_IMAGE_TARGET :=
 INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET :=
 INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET :=
 endif
 endif # TARGET_ARCH == x86
	# note: requires x86 because we assume grub is the mbr bootloader.
	ifeq ($(TARGET_ARCH),x86)
	ifeq ($(TARGET_USE_DISKINSTALLER),true)

	diskinstaller_root := bootable/diskinstaller

	android_sysbase_modules := \
	libc \
	libcutils \
	libdl \
	liblog \
	libm \
	libstdc++ \
	linker \
	ash \
	toolbox \
	logcat \
	gdbserver \
	strace \
	netcfg
	android_sysbase_files = \
	$(call module-installed-files,$(android_sysbase_modules))

	# $(1): source base dir
	# $(2): target base dir
	define sysbase-copy-files
	$(hide) $(foreach _f,$(android_sysbase_files), \
	f=$(patsubst $(1)/%,$(2)/%,$(_f)); \
	mkdir -p `dirname $$f`; \
	echo "Copy: $$f" ; \
	cp -fR $(_f) $$f; \
	)
	endef

	installer_base_modules := \
	libdiskconfig \
	libext2fs \
	libext2_com_err \
	libext2_e2p \
	libext2_blkid \
	libext2_uuid \
	libext2_profile \
	badblocks \
	resize2fs \
	tune2fs \
	mke2fs \
	e2fsck
	installer_base_files = \
	$(call module-built-files,$(installer_base_modules))

	# $(1): source base dir
	# $(2): target base dir
	define installer-copy-modules
	$(hide) $(foreach m,$(installer_base_modules), \
	src=$(firstword $(strip $(call module-built-files,$(m)))); \
	dest=$(patsubst $(strip $(1))/%,$(strip $(2))/%,\
	$(firstword $(strip $(call module-installed-files,$(m))))); \
	echo "Copy: $$src -> $$dest"; \
	mkdir -p `dirname $$dest`; \
	cp -fdp $$src $$dest; \
	)
	endef

	# Build the installer ramdisk image
	installer_initrc := $(diskinstaller_root)/init.rc
	installer_kernel := $(INSTALLED_KERNEL_TARGET)
	installer_ramdisk := $(TARGET_INSTALLER_OUT)/ramdisk-installer.img
	installer_build_prop := $(INSTALLED_BUILD_PROP_TARGET)
	installer_config := $(diskinstaller_root)/installer.conf
	installer_binary := \
	$(call intermediates-dir-for,EXECUTABLES,diskinstaller)/diskinstaller

	$(installer_ramdisk): $(diskinstaller_root)/config.mk \
	$(MKBOOTFS) \
	$(INSTALLED_RAMDISK_TARGET) \
	$(INSTALLED_BOOTIMAGE_TARGET) \
	$(TARGET_DISK_LAYOUT_CONFIG) \
	$(installer_binary) \
	$(installer_initrc) \
	$(installer_kernel) \
	$(installer_config) \
	$(android_sysbase_files) \
	$(installer_base_files) \
	$(installer_build_prop)
	@echo ----- Making installer image ------
	rm -rf $(TARGET_INSTALLER_OUT)
	mkdir -p $(TARGET_INSTALLER_OUT)
	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)
	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)/sbin
	mkdir -p $(TARGET_INSTALLER_ROOT_OUT)/data
	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)
	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)/etc
	mkdir -p $(TARGET_INSTALLER_SYSTEM_OUT)/bin
	@echo Copying baseline ramdisk...
	cp -fR $(TARGET_ROOT_OUT) $(TARGET_INSTALLER_OUT)
	@echo Copying sysbase files...
	$(call sysbase-copy-files,$(TARGET_OUT),$(TARGET_INSTALLER_SYSTEM_OUT))
	@echo Copying installer base files...
	$(call installer-copy-modules,$(TARGET_OUT),\
	$(TARGET_INSTALLER_SYSTEM_OUT))
	@echo Modifying ramdisk contents...
	cp -f $(installer_initrc) $(TARGET_INSTALLER_ROOT_OUT)/
	cp -f $(TARGET_DISK_LAYOUT_CONFIG) \
	$(TARGET_INSTALLER_SYSTEM_OUT)/etc/disk_layout.conf
	cp -f $(installer_config) \
	$(TARGET_INSTALLER_SYSTEM_OUT)/etc/installer.conf
	cp -f $(installer_binary) $(TARGET_INSTALLER_SYSTEM_OUT)/bin/installer
	$(hide) chmod ug+rw $(TARGET_INSTALLER_ROOT_OUT)/default.prop
	cat $(installer_build_prop) >> $(TARGET_INSTALLER_ROOT_OUT)/default.prop
	$(MKBOOTFS) $(TARGET_INSTALLER_ROOT_OUT) \| gzip > $(installer_ramdisk)
	@echo ----- Made installer ramdisk -[ $@ ]-

	######################################################################
	# Now the installer boot image which includes the kernel and the ramdisk
	internal_installerimage_args := \
	--kernel $(installer_kernel) \
	--ramdisk $(installer_ramdisk)

	internal_installerimage_files := \
	$(filter-out --%,$(internal_installerimage_args))

	BOARD_INSTALLER_CMDLINE := $(strip $(BOARD_INSTALLER_CMDLINE))
	ifdef BOARD_INSTALLER_CMDLINE
	internal_installerimage_args += --cmdline "$(BOARD_INSTALLER_CMDLINE)"
	endif

	installer_tmp_img := $(TARGET_INSTALLER_OUT)/installer_tmp.img
	tmp_dir_for_inst_image := \
	$(call intermediates-dir-for,EXECUTABLES,installer_img)/installer_img
	internal_installerimage_args += --tmpdir $(tmp_dir_for_inst_image)
	internal_installerimage_args += --genext2fs $(MKEXT2IMG)
	$(installer_tmp_img): $(MKEXT2IMG) $(internal_installerimage_files)
	$(call pretty,"Target installer image: $@")
	$(hide) $(MKEXT2BOOTIMG) $(internal_installerimage_args) --output $@

	######################################################################
	# Now make a data image that contains all the target image files for the
	# installer.

	bootldr_bin := $(PRODUCT_OUT)/grub/grub.bin
	installer_target_data_files := \
	$(INSTALLED_BOOTIMAGE_TARGET) \
	$(INSTALLED_SYSTEMIMAGE) \
	$(INSTALLED_USERDATAIMAGE_TARGET) \
	$(bootldr_bin)

	# $(1): src directory
	# $(2): output file
	# $(3): mount point
	# $(4): ext variant (ext2, ext3, ext4)
	# $(5): size of the partition
	define build-installerimage-ext-target
	@mkdir -p $(dir $(2))
	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$(PATH) \
	$(MKEXTUSERIMG) $(1) $(2) $(4) $(3) $(5)
	endef

	installer_data_img := $(TARGET_INSTALLER_OUT)/installer_data.img
	$(installer_data_img): $(diskinstaller_root)/config.mk \
	$(installer_target_data_files) \
	$(MKEXT2IMG) \
	$(installer_ramdisk)
	@echo --- Making installer data image ------
	mkdir -p $(TARGET_INSTALLER_OUT)
	mkdir -p $(TARGET_INSTALLER_OUT)/data
	cp -f $(bootldr_bin) $(TARGET_INSTALLER_OUT)/data/bootldr.bin
	cp -f $(INSTALLED_BOOTIMAGE_TARGET) $(TARGET_INSTALLER_OUT)/data/boot.img
	cp -f $(INSTALLED_SYSTEMIMAGE) \
	$(TARGET_INSTALLER_OUT)/data/system.img
	cp -f $(INSTALLED_USERDATAIMAGE_TARGET) \
	$(TARGET_INSTALLER_OUT)/data/userdata.img
	$(call build-installerimage-ext-target,$(TARGET_INSTALLER_OUT)/data,$@, \
	inst_data,ext4,$(BOARD_INSTALLERIMAGE_PARTITION_SIZE))
	@echo --- Finished installer data image -[ $@ ]-

	######################################################################
	# now combine the installer image with the grub bootloader
	grub_bin := $(PRODUCT_OUT)/grub/grub.bin
	installer_layout := $(diskinstaller_root)/installer_img_layout.conf
	edit_mbr := $(HOST_OUT_EXECUTABLES)/editdisklbl

	INSTALLED_DISK_INSTALLER_IMAGE_TARGET := $(PRODUCT_OUT)/installer.img
	$(INSTALLED_DISK_INSTALLER_IMAGE_TARGET): \
	$(installer_tmp_img) \
	$(installer_data_img) \
	$(grub_bin) \
	$(edit_mbr) \
	$(installer_layout)
	@echo "Creating bootable installer image: $@"
	@rm -f $@
	$(hide) cat $(grub_bin) > $@
	$(hide) $(edit_mbr) -l $(installer_layout) -i $@ \
	inst_boot=$(installer_tmp_img) \
	inst_data=$(installer_data_img)
	@echo "Done with bootable installer image -[ $@ ]-"

	#
	# Ditto for the android_system_disk and android_data_disk images
	#

	INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET := $(PRODUCT_OUT)/android_system_disk.img
	android_system_layout := $(diskinstaller_root)/android_img_system_layout.conf

	INSTALLED_ANDROID_IMAGE_DATA_TARGET := $(PRODUCT_OUT)/android_data_disk.img
	android_data_layout := $(diskinstaller_root)/android_img_data_layout.conf

	$(INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET): \
	$(INSTALLED_SYSTEMIMAGE) \
	$(INSTALLED_BOOTIMAGE_TARGET) \
	$(grub_bin) \
	$(edit_mbr) \
	$(android_system_layout)
	@echo "Creating bootable android system-disk image: $@"
	@rm -f $@
	$(hide) cat $(grub_bin) > $@
	$(hide) $(edit_mbr) -l $(android_system_layout) -i $@ \
	inst_boot=$(INSTALLED_BOOTIMAGE_TARGET) \
	inst_system=$(INSTALLED_SYSTEMIMAGE)
	@echo "Done with bootable android system-disk image -[ $@ ]-"

	$(INSTALLED_ANDROID_IMAGE_DATA_TARGET): \
	$(INSTALLED_USERDATAIMAGE_TARGET) \
	$(grub_bin) \
	$(edit_mbr) \
	$(android_data_layout)
	@echo "Creating bootable android data-disk image: $@"
	@rm -f $@
	$(hide) cat $(grub_bin) > $@
	$(hide) $(edit_mbr) -l $(android_data_layout) -i $@ \
	inst_data=$(INSTALLED_USERDATAIMAGE_TARGET) \
	inst_cache=$(INSTALLED_CACHEIMAGE_TARGET)
	@echo "Done with bootable android data-disk image -[ $@ ]-"



	######################################################################
	# now convert the installer_img (disk image) to a VirtualBox image

	INSTALLED_VBOX_INSTALLER_IMAGE_TARGET := $(PRODUCT_OUT)/installer.vdi
	virtual_box_manager := VBoxManage
	# hrd-code the UUID so we don't have to release the disk manually in the VirtualBox manager.
	virtual_box_manager_options := convertfromraw --format VDI
	virtual_box_manager_system_disk_ptions := --uuid "{aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa}"
	virtual_box_manager_data_disk_ptions := --uuid "{bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb}"

	$(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET): $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET)
	@rm -f $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)
	$(hide) $(virtual_box_manager) $(virtual_box_manager_options) $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET) $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)
	@echo "Done with VirtualBox bootable installer image -[ $@ ]-"

	#
	# Ditto for the android_system_disk and android_user_disk images
	#

	INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET := $(PRODUCT_OUT)/android_system_disk.vdi
	$(INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET): $(INSTALLED_ANDROID_IMAGE_SYSTEM_TARGET)
	@rm -f $@
	$(hide) $(virtual_box_manager) \
	$(virtual_box_manager_options) \
	$(virtual_box_manager_system_disk_ptions) \
	$^ $@
	@echo "Done with VirtualBox bootable system-disk image -[ $@ ]-"

	INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET := $(PRODUCT_OUT)/android_data_disk.vdi
	$(INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET): $(INSTALLED_ANDROID_IMAGE_DATA_TARGET)
	@rm -f $@
	$(hide) $(virtual_box_manager) \
	$(virtual_box_manager_options) \
	$(virtual_box_manager_data_disk_ptions) \
	$^ $@
	@echo "Done with VirtualBox bootable data-disk image -[ $@ ]-"

	.PHONY: installer_img
	installer_img: $(INSTALLED_DISK_INSTALLER_IMAGE_TARGET)

	.PHONY: installer_vdi
	installer_vdi: $(INSTALLED_VBOX_INSTALLER_IMAGE_TARGET)

	.PHONY: android_disk_vdi android_system_disk_vdi android_data_disk_vdi
	android_system_disk_vdi: $(INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET)
	android_data_disk_vdi: $(INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET)
	android_disk_vdi: android_system_disk_vdi android_data_disk_vdi


	else # ! TARGET_USE_DISKINSTALLER
	INSTALLED_DISK_INSTALLER_IMAGE_TARGET :=
	INSTALLED_VBOX_SYSTEM_DISK_IMAGE_TARGET :=
	INSTALLED_VBOX_DATA_DISK_IMAGE_TARGET :=
	endif
	endif # TARGET_ARCH == x86