| |
| /* ----------------------------------------------------------------------------------------------------------- |
| Software License for The Fraunhofer FDK AAC Codec Library for Android |
| |
| © Copyright 1995 - 2012 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. |
| All rights reserved. |
| |
| 1. INTRODUCTION |
| The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements |
| the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. |
| This FDK AAC Codec software is intended to be used on a wide variety of Android devices. |
| |
| AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual |
| audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by |
| independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part |
| of the MPEG specifications. |
| |
| Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) |
| may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners |
| individually for the purpose of encoding or decoding bit streams in products that are compliant with |
| the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license |
| these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec |
| software may already be covered under those patent licenses when it is used for those licensed purposes only. |
| |
| Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, |
| are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional |
| applications information and documentation. |
| |
| 2. COPYRIGHT LICENSE |
| |
| Redistribution and use in source and binary forms, with or without modification, are permitted without |
| payment of copyright license fees provided that you satisfy the following conditions: |
| |
| You must retain the complete text of this software license in redistributions of the FDK AAC Codec or |
| your modifications thereto in source code form. |
| |
| You must retain the complete text of this software license in the documentation and/or other materials |
| provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. |
| You must make available free of charge copies of the complete source code of the FDK AAC Codec and your |
| modifications thereto to recipients of copies in binary form. |
| |
| The name of Fraunhofer may not be used to endorse or promote products derived from this library without |
| prior written permission. |
| |
| You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec |
| software or your modifications thereto. |
| |
| Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software |
| and the date of any change. For modified versions of the FDK AAC Codec, the term |
| "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term |
| "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." |
| |
| 3. NO PATENT LICENSE |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, |
| ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with |
| respect to this software. |
| |
| You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized |
| by appropriate patent licenses. |
| |
| 4. DISCLAIMER |
| |
| This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors |
| "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties |
| of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
| CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, |
| including but not limited to procurement of substitute goods or services; loss of use, data, or profits, |
| or business interruption, however caused and on any theory of liability, whether in contract, strict |
| liability, or tort (including negligence), arising in any way out of the use of this software, even if |
| advised of the possibility of such damage. |
| |
| 5. CONTACT INFORMATION |
| |
| Fraunhofer Institute for Integrated Circuits IIS |
| Attention: Audio and Multimedia Departments - FDK AAC LL |
| Am Wolfsmantel 33 |
| 91058 Erlangen, Germany |
| |
| www.iis.fraunhofer.de/amm |
| amm-info@iis.fraunhofer.de |
| ----------------------------------------------------------------------------------------------------------- */ |
| |
| /*! |
| \file |
| \brief Envelope extraction |
| The functions provided by this module are mostly called by applySBR(). After it is |
| determined that there is valid SBR data, sbrGetHeaderData() might be called if the current |
| SBR data contains an \ref SBR_HEADER_ELEMENT as opposed to a \ref SBR_STANDARD_ELEMENT. This function |
| may return various error codes as defined in #SBR_HEADER_STATUS . Most importantly it returns HEADER_RESET when decoder |
| settings need to be recalculated according to the SBR specifications. In that case applySBR() |
| will initiatite the required re-configuration. |
| |
| The header data is stored in a #SBR_HEADER_DATA structure. |
| |
| The actual SBR data for the current frame is decoded into SBR_FRAME_DATA stuctures by sbrGetChannelPairElement() |
| [for stereo streams] and sbrGetSingleChannelElement() [for mono streams]. There is no fractional arithmetic involved. |
| |
| Once the information is extracted, the data needs to be further prepared before the actual decoding process. |
| This is done in decodeSbrData(). |
| |
| \sa Description of buffer management in applySBR(). \ref documentationOverview |
| |
| <h1>About the SBR data format:</h1> |
| |
| Each frame includes SBR data (side chain information), and can be either the \ref SBR_HEADER_ELEMENT or the \ref SBR_STANDARD_ELEMENT. |
| Parts of the data can be protected by a CRC checksum. |
| |
| \anchor SBR_HEADER_ELEMENT <h2>The SBR_HEADER_ELEMENT</h2> |
| |
| The SBR_HEADER_ELEMENT can be transmitted with every frame, however, it typically is send every second or so. It contains fundamental |
| information such as SBR sampling frequency and frequency range as well as control signals that do not require frequent changes. It also |
| includes the \ref SBR_STANDARD_ELEMENT. |
| |
| Depending on the changes between the information in a current SBR_HEADER_ELEMENT and the previous SBR_HEADER_ELEMENT, the SBR decoder might need |
| to be reset and reconfigured (e.g. new tables need to be calculated). |
| |
| \anchor SBR_STANDARD_ELEMENT <h2>The SBR_STANDARD_ELEMENT</h2> |
| |
| This data can be subdivided into "side info" and "raw data", where side info is defined as signals needed to decode the raw data |
| and some decoder tuning signals. Raw data is referred to as PCM and Huffman coded envelope and noise floor estimates. The side info also |
| includes information about the time-frequency grid for the current frame. |
| |
| \sa \ref documentationOverview |
| */ |
| |
| #include "env_extr.h" |
| |
| #include "sbr_ram.h" |
| #include "sbr_rom.h" |
| #include "huff_dec.h" |
| |
| |
| #include "psbitdec.h" |
| |
| #define DRM_PARAMETRIC_STEREO 0 |
| #define EXTENSION_ID_PS_CODING 2 |
| |
| |
| static int extractFrameInfo (HANDLE_FDK_BITSTREAM hBs, |
| HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_FRAME_DATA h_frame_data, |
| const UINT nrOfChannels, |
| const UINT flags |
| ); |
| |
| |
| static int sbrGetEnvelope (HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_FRAME_DATA h_frame_data, |
| HANDLE_FDK_BITSTREAM hBs, |
| const UINT flags); |
| |
| static void sbrGetDirectionControlData (HANDLE_SBR_FRAME_DATA hFrameData, |
| HANDLE_FDK_BITSTREAM hBs); |
| |
| static void sbrGetNoiseFloorData (HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_FRAME_DATA h_frame_data, |
| HANDLE_FDK_BITSTREAM hBs); |
| |
| static int checkFrameInfo (FRAME_INFO *pFrameInfo, int numberOfTimeSlots, int overlap, int timeStep); |
| |
| SBR_ERROR |
| initHeaderData ( |
| HANDLE_SBR_HEADER_DATA hHeaderData, |
| const int sampleRateIn, |
| const int sampleRateOut, |
| const int samplesPerFrame, |
| const UINT flags |
| ) |
| { |
| HANDLE_FREQ_BAND_DATA hFreq = &hHeaderData->freqBandData; |
| SBR_ERROR sbrError = SBRDEC_OK; |
| int numAnalysisBands; |
| |
| if ( sampleRateIn == sampleRateOut ) { |
| hHeaderData->sbrProcSmplRate = sampleRateOut<<1; |
| numAnalysisBands = 32; |
| } else { |
| hHeaderData->sbrProcSmplRate = sampleRateOut; |
| if ( (sampleRateOut>>1) == sampleRateIn) { |
| /* 1:2 */ |
| numAnalysisBands = 32; |
| } else if ( (sampleRateOut>>2) == sampleRateIn ) { |
| /* 1:4 */ |
| numAnalysisBands = 32; |
| } else if ( (sampleRateOut*3)>>3 == (sampleRateIn*8)>>3 ) { |
| /* 3:8, 3/4 core frame length */ |
| numAnalysisBands = 24; |
| } else { |
| sbrError = SBRDEC_UNSUPPORTED_CONFIG; |
| goto bail; |
| } |
| } |
| |
| /* Fill in default values first */ |
| hHeaderData->syncState = SBR_NOT_INITIALIZED; |
| hHeaderData->status = 0; |
| hHeaderData->frameErrorFlag = 0; |
| |
| hHeaderData->bs_info.ampResolution = 1; |
| hHeaderData->bs_info.xover_band = 0; |
| hHeaderData->bs_info.sbr_preprocessing = 0; |
| |
| hHeaderData->bs_data.startFreq = 5; |
| hHeaderData->bs_data.stopFreq = 0; |
| hHeaderData->bs_data.freqScale = 2; |
| hHeaderData->bs_data.alterScale = 1; |
| hHeaderData->bs_data.noise_bands = 2; |
| hHeaderData->bs_data.limiterBands = 2; |
| hHeaderData->bs_data.limiterGains = 2; |
| hHeaderData->bs_data.interpolFreq = 1; |
| hHeaderData->bs_data.smoothingLength = 1; |
| |
| hHeaderData->timeStep = (flags & SBRDEC_ELD_GRID) ? 1 : 2; |
| |
| /* Setup pointers to frequency band tables */ |
| hFreq->freqBandTable[0] = hFreq->freqBandTableLo; |
| hFreq->freqBandTable[1] = hFreq->freqBandTableHi; |
| |
| /* Patch some entries */ |
| if (sampleRateOut > 24000) { /* Trigger an error if SBR is going to be processed without */ |
| hHeaderData->bs_data.startFreq = 7; /* having read these frequency values from bit stream before. */ |
| hHeaderData->bs_data.stopFreq = 3; |
| } |
| |
| /* One SBR timeslot corresponds to the amount of samples equal to the amount of analysis bands, divided by the timestep. */ |
| hHeaderData->numberTimeSlots = (samplesPerFrame/numAnalysisBands) >> (hHeaderData->timeStep - 1); |
| if (hHeaderData->numberTimeSlots > (16)) { |
| sbrError = SBRDEC_UNSUPPORTED_CONFIG; |
| } |
| |
| hHeaderData->numberOfAnalysisBands = numAnalysisBands; |
| |
| bail: |
| return sbrError; |
| } |
| |
| |
| /*! |
| \brief Initialize the SBR_PREV_FRAME_DATA struct |
| */ |
| void |
| initSbrPrevFrameData (HANDLE_SBR_PREV_FRAME_DATA h_prev_data, /*!< handle to struct SBR_PREV_FRAME_DATA */ |
| int timeSlots) /*!< Framelength in SBR-timeslots */ |
| { |
| int i; |
| |
| /* Set previous energy and noise levels to 0 for the case |
| that decoding starts in the middle of a bitstream */ |
| for (i=0; i < MAX_FREQ_COEFFS; i++) |
| h_prev_data->sfb_nrg_prev[i] = (FIXP_DBL)0; |
| for (i=0; i < MAX_NOISE_COEFFS; i++) |
| h_prev_data->prevNoiseLevel[i] = (FIXP_DBL)0; |
| for (i=0; i < MAX_INVF_BANDS; i++) |
| h_prev_data->sbr_invf_mode[i] = INVF_OFF; |
| |
| h_prev_data->stopPos = timeSlots; |
| h_prev_data->coupling = COUPLING_OFF; |
| h_prev_data->ampRes = 0; |
| } |
| |
| |
| /*! |
| \brief Read header data from bitstream |
| |
| \return error status - 0 if ok |
| */ |
| SBR_HEADER_STATUS |
| sbrGetHeaderData (HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_FDK_BITSTREAM hBs, |
| const UINT flags, |
| const int fIsSbrData) |
| { |
| SBR_HEADER_DATA_BS *pBsData; |
| SBR_HEADER_DATA_BS lastHeader; |
| SBR_HEADER_DATA_BS_INFO lastInfo; |
| int headerExtra1=0, headerExtra2=0; |
| |
| /* Copy SBR bit stream header to temporary header */ |
| lastHeader = hHeaderData->bs_data; |
| lastInfo = hHeaderData->bs_info; |
| |
| /* Read new header from bitstream */ |
| { |
| pBsData = &hHeaderData->bs_data; |
| } |
| |
| { |
| hHeaderData->bs_info.ampResolution = FDKreadBits (hBs, 1); |
| } |
| |
| pBsData->startFreq = FDKreadBits (hBs, 4); |
| pBsData->stopFreq = FDKreadBits (hBs, 4); |
| |
| { |
| hHeaderData->bs_info.xover_band = FDKreadBits (hBs, 3); |
| FDKreadBits (hBs, 2); |
| } |
| |
| headerExtra1 = FDKreadBits (hBs, 1); |
| headerExtra2 = FDKreadBits (hBs, 1); |
| |
| /* Handle extra header information */ |
| if( headerExtra1) |
| { |
| pBsData->freqScale = FDKreadBits (hBs, 2); |
| pBsData->alterScale = FDKreadBits (hBs, 1); |
| pBsData->noise_bands = FDKreadBits (hBs, 2); |
| } |
| else { |
| pBsData->freqScale = 2; |
| pBsData->alterScale = 1; |
| pBsData->noise_bands = 2; |
| } |
| |
| if (headerExtra2) { |
| pBsData->limiterBands = FDKreadBits (hBs, 2); |
| pBsData->limiterGains = FDKreadBits (hBs, 2); |
| pBsData->interpolFreq = FDKreadBits (hBs, 1); |
| pBsData->smoothingLength = FDKreadBits (hBs, 1); |
| } |
| else { |
| pBsData->limiterBands = 2; |
| pBsData->limiterGains = 2; |
| pBsData->interpolFreq = 1; |
| pBsData->smoothingLength = 1; |
| } |
| |
| /* Look for new settings. IEC 14496-3, 4.6.18.3.1 */ |
| if(hHeaderData->syncState != SBR_ACTIVE || |
| lastHeader.startFreq != pBsData->startFreq || |
| lastHeader.stopFreq != pBsData->stopFreq || |
| lastHeader.freqScale != pBsData->freqScale || |
| lastHeader.alterScale != pBsData->alterScale || |
| lastHeader.noise_bands != pBsData->noise_bands || |
| lastInfo.xover_band != hHeaderData->bs_info.xover_band) { |
| return HEADER_RESET; /* New settings */ |
| } |
| |
| return HEADER_OK; |
| } |
| |
| /*! |
| \brief Get missing harmonics parameters (only used for AAC+SBR) |
| |
| \return error status - 0 if ok |
| */ |
| int |
| sbrGetSyntheticCodedData(HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_FRAME_DATA hFrameData, |
| HANDLE_FDK_BITSTREAM hBs) |
| { |
| int i, bitsRead = 0; |
| |
| int flag = FDKreadBits(hBs,1); |
| bitsRead++; |
| |
| if(flag){ |
| for(i=0;i<hHeaderData->freqBandData.nSfb[1];i++){ |
| hFrameData->addHarmonics[i] = FDKreadBits (hBs, 1 ); |
| bitsRead++; |
| } |
| } |
| else { |
| for(i=0; i<MAX_FREQ_COEFFS; i++) |
| hFrameData->addHarmonics[i] = 0; |
| } |
| return(bitsRead); |
| } |
| |
| /*! |
| \brief Reads extension data from the bitstream |
| |
| The bitstream format allows up to 4 kinds of extended data element. |
| Extended data may contain several elements, each identified by a 2-bit-ID. |
| So far, no extended data elements are defined hence the first 2 parameters |
| are unused. The data should be skipped in order to update the number |
| of read bits for the consistency check in applySBR(). |
| */ |
| static int extractExtendedData( |
| HANDLE_SBR_HEADER_DATA hHeaderData, /*!< handle to SBR header */ |
| HANDLE_FDK_BITSTREAM hBs /*!< Handle to the bit buffer */ |
| ,HANDLE_PS_DEC hParametricStereoDec /*!< Parametric Stereo Decoder */ |
| ) { |
| INT nBitsLeft; |
| int extended_data; |
| int i, frameOk = 1; |
| |
| |
| extended_data = FDKreadBits(hBs, 1); |
| |
| if (extended_data) { |
| int cnt; |
| int bPsRead = 0; |
| |
| cnt = FDKreadBits(hBs, 4); |
| if (cnt == (1<<4)-1) |
| cnt += FDKreadBits(hBs, 8); |
| |
| |
| nBitsLeft = 8 * cnt; |
| |
| /* sanity check for cnt */ |
| if (nBitsLeft > (INT)FDKgetValidBits(hBs)) { |
| /* limit nBitsLeft */ |
| nBitsLeft = (INT)FDKgetValidBits(hBs); |
| /* set frame error */ |
| frameOk = 0; |
| } |
| |
| while (nBitsLeft > 7) { |
| int extension_id = FDKreadBits(hBs, 2); |
| nBitsLeft -= 2; |
| |
| switch(extension_id) { |
| |
| |
| |
| case EXTENSION_ID_PS_CODING: |
| |
| /* Read PS data from bitstream */ |
| |
| if (hParametricStereoDec != NULL) { |
| if(bPsRead && !hParametricStereoDec->bsData[hParametricStereoDec->bsReadSlot].mpeg.bPsHeaderValid) { |
| cnt = nBitsLeft >> 3; /* number of remaining bytes */ |
| for (i=0; i<cnt; i++) |
| FDKreadBits(hBs, 8); |
| nBitsLeft -= cnt * 8; |
| } else { |
| nBitsLeft -= ReadPsData(hParametricStereoDec, hBs, nBitsLeft); |
| bPsRead = 1; |
| } |
| } |
| |
| /* parametric stereo detected, could set channelMode accordingly here */ |
| /* */ |
| /* "The usage of this parametric stereo extension to HE-AAC is */ |
| /* signalled implicitly in the bitstream. Hence, if an sbr_extension() */ |
| /* with bs_extension_id==EXTENSION_ID_PS is found in the SBR part of */ |
| /* the bitstream, a decoder supporting the combination of SBR and PS */ |
| /* shall operate the PS tool to generate a stereo output signal." */ |
| /* source: ISO/IEC 14496-3:2001/FDAM 2:2004(E) */ |
| |
| break; |
| |
| |
| default: |
| cnt = nBitsLeft >> 3; /* number of remaining bytes */ |
| for (i=0; i<cnt; i++) |
| FDKreadBits(hBs, 8); |
| nBitsLeft -= cnt * 8; |
| break; |
| } |
| } |
| |
| if (nBitsLeft < 0) { |
| frameOk = 0; |
| goto bail; |
| } |
| else { |
| /* Read fill bits for byte alignment */ |
| FDKreadBits(hBs, nBitsLeft); |
| } |
| } |
| |
| bail: |
| return (frameOk); |
| } |
| |
| |
| /*! |
| \brief Read bitstream elements of one channel |
| |
| \return SbrFrameOK: 1=ok, 0=error |
| */ |
| int |
| sbrGetSingleChannelElement (HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA hFrameData, /*!< Control data of current frame */ |
| HANDLE_FDK_BITSTREAM hBs, /*!< Handle to struct BIT_BUF */ |
| HANDLE_PS_DEC hParametricStereoDec, /*!< Handle to PS decoder */ |
| const UINT flags, |
| const int overlap |
| ) |
| { |
| int i; |
| |
| |
| hFrameData->coupling = COUPLING_OFF; |
| |
| { |
| /* Reserved bits */ |
| if (FDKreadBits(hBs, 1)) { /* bs_data_extra */ |
| FDKreadBits(hBs, 4); |
| if (flags & SBRDEC_SYNTAX_SCAL) { |
| FDKreadBits(hBs, 4); |
| } |
| } |
| } |
| |
| if (flags & SBRDEC_SYNTAX_SCAL) { |
| FDKreadBits (hBs, 1); /* bs_coupling */ |
| } |
| |
| /* |
| Grid control |
| */ |
| if ( !extractFrameInfo ( hBs, hHeaderData, hFrameData, 1, flags) ) |
| return 0; |
| |
| if ( !checkFrameInfo (&hFrameData->frameInfo, hHeaderData->numberTimeSlots, overlap, hHeaderData->timeStep) ) |
| return 0; |
| |
| |
| /* |
| Fetch domain vectors (time or frequency direction for delta-coding) |
| */ |
| sbrGetDirectionControlData (hFrameData, hBs); |
| |
| for (i=0; i<hHeaderData->freqBandData.nInvfBands; i++) { |
| hFrameData->sbr_invf_mode[i] = |
| (INVF_MODE) FDKreadBits (hBs, 2); |
| } |
| |
| |
| |
| /* raw data */ |
| if ( !sbrGetEnvelope (hHeaderData, hFrameData, hBs, flags) ) |
| return 0; |
| |
| |
| sbrGetNoiseFloorData (hHeaderData, hFrameData, hBs); |
| |
| sbrGetSyntheticCodedData(hHeaderData, hFrameData, hBs); |
| |
| { |
| /* sbr extended data */ |
| if (! extractExtendedData( |
| hHeaderData, |
| hBs |
| ,hParametricStereoDec |
| )) { |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| |
| |
| /*! |
| \brief Read bitstream elements of a channel pair |
| \return SbrFrameOK |
| */ |
| int |
| sbrGetChannelPairElement (HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA hFrameDataLeft, /*!< Dynamic control data for first channel */ |
| HANDLE_SBR_FRAME_DATA hFrameDataRight,/*!< Dynamic control data for second channel */ |
| HANDLE_FDK_BITSTREAM hBs, /*!< handle to struct BIT_BUF */ |
| const UINT flags, |
| const int overlap ) |
| { |
| int i, bit; |
| |
| |
| /* Reserved bits */ |
| if (FDKreadBits(hBs, 1)) { /* bs_data_extra */ |
| FDKreadBits(hBs, 4); |
| FDKreadBits(hBs, 4); |
| } |
| |
| /* Read coupling flag */ |
| bit = FDKreadBits (hBs, 1); |
| |
| if (bit) { |
| hFrameDataLeft->coupling = COUPLING_LEVEL; |
| hFrameDataRight->coupling = COUPLING_BAL; |
| } |
| else { |
| hFrameDataLeft->coupling = COUPLING_OFF; |
| hFrameDataRight->coupling = COUPLING_OFF; |
| } |
| |
| |
| /* |
| Grid control |
| */ |
| if ( !extractFrameInfo (hBs, hHeaderData, hFrameDataLeft, 2, flags) ) |
| return 0; |
| |
| if ( !checkFrameInfo (&hFrameDataLeft->frameInfo, hHeaderData->numberTimeSlots, overlap, hHeaderData->timeStep) ) |
| return 0; |
| |
| if (hFrameDataLeft->coupling) { |
| FDKmemcpy (&hFrameDataRight->frameInfo, &hFrameDataLeft->frameInfo, sizeof(FRAME_INFO)); |
| hFrameDataRight->ampResolutionCurrentFrame = hFrameDataLeft->ampResolutionCurrentFrame; |
| } |
| else { |
| if ( !extractFrameInfo (hBs, hHeaderData, hFrameDataRight, 2, flags) ) |
| return 0; |
| |
| if ( !checkFrameInfo (&hFrameDataRight->frameInfo, hHeaderData->numberTimeSlots, overlap, hHeaderData->timeStep) ) |
| return 0; |
| } |
| |
| /* |
| Fetch domain vectors (time or frequency direction for delta-coding) |
| */ |
| sbrGetDirectionControlData (hFrameDataLeft, hBs); |
| sbrGetDirectionControlData (hFrameDataRight, hBs); |
| |
| for (i=0; i<hHeaderData->freqBandData.nInvfBands; i++) { |
| hFrameDataLeft->sbr_invf_mode[i] = (INVF_MODE) FDKreadBits (hBs, 2); |
| } |
| |
| if (hFrameDataLeft->coupling) { |
| for (i=0; i<hHeaderData->freqBandData.nInvfBands; i++) { |
| hFrameDataRight->sbr_invf_mode[i] = hFrameDataLeft->sbr_invf_mode[i]; |
| } |
| |
| |
| if ( !sbrGetEnvelope (hHeaderData, hFrameDataLeft, hBs, flags) ) { |
| return 0; |
| } |
| |
| sbrGetNoiseFloorData (hHeaderData, hFrameDataLeft, hBs); |
| |
| if ( !sbrGetEnvelope (hHeaderData, hFrameDataRight, hBs, flags) ) { |
| return 0; |
| } |
| } |
| else { |
| |
| for (i=0; i<hHeaderData->freqBandData.nInvfBands; i++) { |
| hFrameDataRight->sbr_invf_mode[i] = (INVF_MODE) FDKreadBits (hBs, 2); |
| } |
| |
| |
| |
| if ( !sbrGetEnvelope (hHeaderData, hFrameDataLeft, hBs, flags) ) |
| return 0; |
| |
| if ( !sbrGetEnvelope (hHeaderData, hFrameDataRight, hBs, flags) ) |
| return 0; |
| |
| sbrGetNoiseFloorData (hHeaderData, hFrameDataLeft, hBs); |
| |
| } |
| sbrGetNoiseFloorData (hHeaderData, hFrameDataRight, hBs); |
| |
| sbrGetSyntheticCodedData(hHeaderData, hFrameDataLeft, hBs); |
| sbrGetSyntheticCodedData(hHeaderData, hFrameDataRight, hBs); |
| |
| { |
| if (! extractExtendedData( |
| hHeaderData, |
| hBs |
| ,NULL |
| ) ) { |
| return 0; |
| } |
| } |
| |
| return 1; |
| } |
| |
| |
| |
| |
| /*! |
| \brief Read direction control data from bitstream |
| */ |
| void |
| sbrGetDirectionControlData (HANDLE_SBR_FRAME_DATA h_frame_data, /*!< handle to struct SBR_FRAME_DATA */ |
| HANDLE_FDK_BITSTREAM hBs) /*!< handle to struct BIT_BUF */ |
| { |
| int i; |
| |
| for (i = 0; i < h_frame_data->frameInfo.nEnvelopes; i++) { |
| h_frame_data->domain_vec[i] = FDKreadBits (hBs, 1); |
| } |
| |
| for (i = 0; i < h_frame_data->frameInfo.nNoiseEnvelopes; i++) { |
| h_frame_data->domain_vec_noise[i] = FDKreadBits (hBs, 1); |
| } |
| } |
| |
| |
| |
| /*! |
| \brief Read noise-floor-level data from bitstream |
| */ |
| void |
| sbrGetNoiseFloorData (HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA h_frame_data, /*!< handle to struct SBR_FRAME_DATA */ |
| HANDLE_FDK_BITSTREAM hBs) /*!< handle to struct BIT_BUF */ |
| { |
| int i,j; |
| int delta; |
| COUPLING_MODE coupling; |
| int noNoiseBands = hHeaderData->freqBandData.nNfb; |
| |
| Huffman hcb_noiseF; |
| Huffman hcb_noise; |
| int envDataTableCompFactor; |
| |
| coupling = h_frame_data->coupling; |
| |
| |
| /* |
| Select huffman codebook depending on coupling mode |
| */ |
| if (coupling == COUPLING_BAL) { |
| hcb_noise = (Huffman)&FDK_sbrDecoder_sbr_huffBook_NoiseBalance11T; |
| hcb_noiseF = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvBalance11F; /* "sbr_huffBook_NoiseBalance11F" */ |
| envDataTableCompFactor = 1; |
| } |
| else { |
| hcb_noise = (Huffman)&FDK_sbrDecoder_sbr_huffBook_NoiseLevel11T; |
| hcb_noiseF = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvLevel11F; /* "sbr_huffBook_NoiseLevel11F" */ |
| envDataTableCompFactor = 0; |
| } |
| |
| /* |
| Read raw noise-envelope data |
| */ |
| for (i=0; i<h_frame_data->frameInfo.nNoiseEnvelopes; i++) { |
| |
| |
| if (h_frame_data->domain_vec_noise[i] == 0) { |
| if (coupling == COUPLING_BAL) { |
| h_frame_data->sbrNoiseFloorLevel[i*noNoiseBands] = |
| (FIXP_SGL) (((int)FDKreadBits (hBs, 5)) << envDataTableCompFactor); |
| } |
| else { |
| h_frame_data->sbrNoiseFloorLevel[i*noNoiseBands] = |
| (FIXP_SGL) (int)FDKreadBits (hBs, 5); |
| } |
| |
| for (j = 1; j < noNoiseBands; j++) { |
| delta = DecodeHuffmanCW(hcb_noiseF, hBs); |
| h_frame_data->sbrNoiseFloorLevel[i*noNoiseBands+j] = (FIXP_SGL) (delta << envDataTableCompFactor); |
| } |
| } |
| else { |
| for (j = 0; j < noNoiseBands; j++) { |
| delta = DecodeHuffmanCW(hcb_noise, hBs); |
| h_frame_data->sbrNoiseFloorLevel[i*noNoiseBands+j] = (FIXP_SGL) (delta << envDataTableCompFactor); |
| } |
| } |
| } |
| } |
| |
| |
| /*! |
| \brief Read envelope data from bitstream |
| */ |
| static int |
| sbrGetEnvelope (HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA h_frame_data, /*!< handle to struct SBR_FRAME_DATA */ |
| HANDLE_FDK_BITSTREAM hBs, /*!< handle to struct BIT_BUF */ |
| const UINT flags) |
| { |
| int i, j; |
| UCHAR no_band[MAX_ENVELOPES]; |
| int delta = 0; |
| int offset = 0; |
| COUPLING_MODE coupling = h_frame_data->coupling; |
| int ampRes = hHeaderData->bs_info.ampResolution; |
| int nEnvelopes = h_frame_data->frameInfo.nEnvelopes; |
| int envDataTableCompFactor; |
| int start_bits, start_bits_balance; |
| Huffman hcb_t, hcb_f; |
| |
| h_frame_data->nScaleFactors = 0; |
| |
| if ( (h_frame_data->frameInfo.frameClass == 0) && (nEnvelopes == 1) ) { |
| if (flags & SBRDEC_ELD_GRID) |
| ampRes = h_frame_data->ampResolutionCurrentFrame; |
| else |
| ampRes = 0; |
| } |
| h_frame_data->ampResolutionCurrentFrame = ampRes; |
| |
| /* |
| Set number of bits for first value depending on amplitude resolution |
| */ |
| if(ampRes == 1) |
| { |
| start_bits = 6; |
| start_bits_balance = 5; |
| } |
| else |
| { |
| start_bits = 7; |
| start_bits_balance = 6; |
| } |
| |
| /* |
| Calculate number of values for each envelope and alltogether |
| */ |
| for (i = 0; i < nEnvelopes; i++) { |
| no_band[i] = hHeaderData->freqBandData.nSfb[h_frame_data->frameInfo.freqRes[i]]; |
| h_frame_data->nScaleFactors += no_band[i]; |
| } |
| if (h_frame_data->nScaleFactors > MAX_NUM_ENVELOPE_VALUES) |
| return 0; |
| |
| /* |
| Select Huffman codebook depending on coupling mode and amplitude resolution |
| */ |
| if (coupling == COUPLING_BAL) { |
| envDataTableCompFactor = 1; |
| if (ampRes == 0) { |
| hcb_t = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvBalance10T; |
| hcb_f = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvBalance10F; |
| } |
| else { |
| hcb_t = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvBalance11T; |
| hcb_f = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvBalance11F; |
| } |
| } |
| else { |
| envDataTableCompFactor = 0; |
| if (ampRes == 0) { |
| hcb_t = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvLevel10T; |
| hcb_f = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvLevel10F; |
| } |
| else { |
| hcb_t = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvLevel11T; |
| hcb_f = (Huffman)&FDK_sbrDecoder_sbr_huffBook_EnvLevel11F; |
| } |
| } |
| |
| /* |
| Now read raw envelope data |
| */ |
| for (j = 0, offset = 0; j < nEnvelopes; j++) { |
| |
| |
| if (h_frame_data->domain_vec[j] == 0) { |
| if (coupling == COUPLING_BAL) { |
| h_frame_data->iEnvelope[offset] = |
| (FIXP_SGL) (( (int)FDKreadBits(hBs, start_bits_balance)) << envDataTableCompFactor); |
| } |
| else { |
| h_frame_data->iEnvelope[offset] = |
| (FIXP_SGL) (int)FDKreadBits (hBs, start_bits); |
| } |
| } |
| |
| for (i = (1 - h_frame_data->domain_vec[j]); i < no_band[j]; i++) { |
| |
| if (h_frame_data->domain_vec[j] == 0) { |
| delta = DecodeHuffmanCW(hcb_f, hBs); |
| } |
| else { |
| delta = DecodeHuffmanCW(hcb_t, hBs); |
| } |
| |
| h_frame_data->iEnvelope[offset + i] = (FIXP_SGL) (delta << envDataTableCompFactor); |
| } |
| offset += no_band[j]; |
| } |
| |
| #if ENV_EXP_FRACT |
| /* Convert from int to scaled fract (ENV_EXP_FRACT bits for the fractional part) */ |
| for (i = 0; i < h_frame_data->nScaleFactors; i++) { |
| h_frame_data->iEnvelope[i] <<= ENV_EXP_FRACT; |
| } |
| #endif |
| |
| return 1; |
| } |
| |
| |
| //static const FRAME_INFO v_frame_info1_8 = { 0, 1, {0, 8}, {1}, -1, 1, {0, 8} }; |
| static const FRAME_INFO v_frame_info2_8 = { 0, 2, {0, 4, 8}, {1, 1}, -1, 2, {0, 4, 8} }; |
| static const FRAME_INFO v_frame_info4_8 = { 0, 4, {0, 2, 4, 6, 8}, {1, 1, 1, 1}, -1, 2, {0, 4, 8} }; |
| |
| /***************************************************************************/ |
| /*! |
| \brief Generates frame info for FIXFIXonly frame class used for low delay version |
| |
| \return nothing |
| ****************************************************************************/ |
| static void generateFixFixOnly ( FRAME_INFO *hSbrFrameInfo, |
| int tranPosInternal, |
| int numberTimeSlots |
| ) |
| { |
| int nEnv, i, tranIdx; |
| const int *pTable; |
| |
| switch (numberTimeSlots) { |
| case 8: |
| pTable = FDK_sbrDecoder_envelopeTable_8[tranPosInternal]; |
| break; |
| case 15: |
| pTable = FDK_sbrDecoder_envelopeTable_15[tranPosInternal]; |
| break; |
| case 16: |
| pTable = FDK_sbrDecoder_envelopeTable_16[tranPosInternal]; |
| break; |
| default: |
| FDK_ASSERT(0); |
| } |
| |
| /* look number of envelopes in table */ |
| nEnv = pTable[0]; |
| /* look up envelope distribution in table */ |
| for (i=1; i<nEnv; i++) |
| hSbrFrameInfo->borders[i] = pTable[i+2]; |
| /* open and close frame border */ |
| hSbrFrameInfo->borders[0] = 0; |
| hSbrFrameInfo->borders[nEnv] = numberTimeSlots; |
| hSbrFrameInfo->nEnvelopes = nEnv; |
| |
| /* transient idx */ |
| tranIdx = hSbrFrameInfo->tranEnv = pTable[1]; |
| |
| /* add noise floors */ |
| hSbrFrameInfo->bordersNoise[0] = 0; |
| hSbrFrameInfo->bordersNoise[1] = hSbrFrameInfo->borders[tranIdx?tranIdx:1]; |
| hSbrFrameInfo->bordersNoise[2] = numberTimeSlots; |
| /* nEnv is always > 1, so nNoiseEnvelopes is always 2 (IEC 14496-3 4.6.19.3.2) */ |
| hSbrFrameInfo->nNoiseEnvelopes = 2; |
| } |
| |
| /*! |
| \brief Extracts LowDelaySBR control data from the bitstream. |
| |
| \return zero for bitstream error, one for correct. |
| */ |
| static int |
| extractLowDelayGrid (HANDLE_FDK_BITSTREAM hBitBuf, /*!< bitbuffer handle */ |
| HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_FRAME_DATA h_frame_data, /*!< contains the FRAME_INFO struct to be filled */ |
| int timeSlots |
| ) |
| { |
| FRAME_INFO * pFrameInfo = &h_frame_data->frameInfo; |
| INT numberTimeSlots = hHeaderData->numberTimeSlots; |
| INT temp = 0, k; |
| |
| /* FIXFIXonly framing case */ |
| h_frame_data->frameInfo.frameClass = 0; |
| |
| /* get the transient position from the bitstream */ |
| switch (timeSlots){ |
| case 8: |
| /* 3bit transient position (temp={0;..;7}) */ |
| temp = FDKreadBits( hBitBuf, 3); |
| break; |
| |
| case 16: |
| case 15: |
| /* 4bit transient position (temp={0;..;15}) */ |
| temp = FDKreadBits( hBitBuf, 4); |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| /* calculate borders according to the transient position */ |
| generateFixFixOnly ( pFrameInfo, |
| temp, |
| numberTimeSlots |
| ); |
| |
| /* decode freq res: */ |
| for (k = 0; k < pFrameInfo->nEnvelopes; k++) { |
| pFrameInfo->freqRes[k] = (UCHAR) FDKreadBits (hBitBuf, 1); /* f = F [1 bits] */ |
| } |
| |
| |
| return 1; |
| } |
| |
| /*! |
| \brief Extract the frame information (structure FRAME_INFO) from the bitstream |
| \return Zero for bitstream error, one for correct. |
| */ |
| int |
| extractFrameInfo ( HANDLE_FDK_BITSTREAM hBs, /*!< bitbuffer handle */ |
| HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA h_frame_data, /*!< pointer to memory where the frame-info will be stored */ |
| const UINT nrOfChannels, |
| const UINT flags |
| ) |
| { |
| FRAME_INFO * pFrameInfo = &h_frame_data->frameInfo; |
| int numberTimeSlots = hHeaderData->numberTimeSlots; |
| int pointer_bits = 0, nEnv = 0, b = 0, border, i, n = 0, |
| k, p, aL, aR, nL, nR, |
| temp = 0, staticFreqRes; |
| UCHAR frameClass; |
| |
| if (flags & SBRDEC_ELD_GRID) { |
| /* CODEC_AACLD (LD+SBR) only uses the normal 0 Grid for non-transient Frames and the LowDelayGrid for transient Frames */ |
| frameClass = FDKreadBits (hBs, 1); /* frameClass = [1 bit] */ |
| if ( frameClass == 1 ) { |
| /* if frameClass == 1, extract LowDelaySbrGrid, otherwise extract normal SBR-Grid for FIXIFX */ |
| /* extract the AACLD-Sbr-Grid */ |
| pFrameInfo->frameClass = frameClass; |
| extractLowDelayGrid (hBs, hHeaderData, h_frame_data, numberTimeSlots); |
| return 1; |
| } |
| } else |
| { |
| frameClass = FDKreadBits (hBs, 2); /* frameClass = C [2 bits] */ |
| } |
| |
| |
| switch (frameClass) { |
| case 0: |
| temp = FDKreadBits (hBs, 2); /* E [2 bits ] */ |
| nEnv = (int) (1 << temp); /* E -> e */ |
| |
| if ((flags & SBRDEC_ELD_GRID) && (nEnv == 1)) |
| h_frame_data->ampResolutionCurrentFrame = FDKreadBits( hBs, 1); /* new ELD Syntax 07-11-09 */ |
| |
| staticFreqRes = FDKreadBits (hBs, 1); |
| |
| { |
| if (nEnv > MAX_ENVELOPES_HEAAC) |
| return 0; |
| } |
| |
| b = nEnv + 1; |
| switch (nEnv) { |
| case 1: |
| switch (numberTimeSlots) { |
| case 15: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info1_15, sizeof(FRAME_INFO)); |
| break; |
| case 16: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info1_16, sizeof(FRAME_INFO)); |
| break; |
| default: |
| FDK_ASSERT(0); |
| } |
| break; |
| case 2: |
| switch (numberTimeSlots) { |
| case 15: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info2_15, sizeof(FRAME_INFO)); |
| break; |
| case 16: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info2_16, sizeof(FRAME_INFO)); |
| break; |
| default: |
| FDK_ASSERT(0); |
| } |
| break; |
| case 4: |
| switch (numberTimeSlots) { |
| case 15: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info4_15, sizeof(FRAME_INFO)); |
| break; |
| case 16: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info4_16, sizeof(FRAME_INFO)); |
| break; |
| default: |
| FDK_ASSERT(0); |
| } |
| break; |
| case 8: |
| #if (MAX_ENVELOPES >= 8) |
| switch (numberTimeSlots) { |
| case 15: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info8_15, sizeof(FRAME_INFO)); |
| break; |
| case 16: |
| FDKmemcpy (pFrameInfo, &FDK_sbrDecoder_sbr_frame_info8_16, sizeof(FRAME_INFO)); |
| break; |
| default: |
| FDK_ASSERT(0); |
| } |
| break; |
| #else |
| return 0; |
| #endif |
| } |
| /* Apply correct freqRes (High is default) */ |
| if (!staticFreqRes) { |
| for (i = 0; i < nEnv ; i++) |
| pFrameInfo->freqRes[i] = 0; |
| } |
| |
| break; |
| case 1: |
| case 2: |
| temp = FDKreadBits (hBs, 2); /* A [2 bits] */ |
| |
| n = FDKreadBits (hBs, 2); /* n = N [2 bits] */ |
| |
| nEnv = n + 1; /* # envelopes */ |
| b = nEnv + 1; /* # borders */ |
| |
| break; |
| } |
| |
| switch (frameClass) { |
| case 1: |
| /* Decode borders: */ |
| pFrameInfo->borders[0] = 0; /* first border */ |
| border = temp + numberTimeSlots; /* A -> aR */ |
| i = b-1; /* frame info index for last border */ |
| pFrameInfo->borders[i] = border; /* last border */ |
| |
| for (k = 0; k < n; k++) { |
| temp = FDKreadBits (hBs, 2);/* R [2 bits] */ |
| border -= (2 * temp + 2); /* R -> r */ |
| pFrameInfo->borders[--i] = border; |
| } |
| |
| |
| /* Decode pointer: */ |
| pointer_bits = DFRACT_BITS - 1 - CountLeadingBits((FIXP_DBL)(n+1)); |
| p = FDKreadBits (hBs, pointer_bits); /* p = P [pointer_bits bits] */ |
| |
| if (p > n+1) |
| return 0; |
| |
| pFrameInfo->tranEnv = p ? n + 2 - p : -1; |
| |
| |
| /* Decode freq res: */ |
| for (k = n; k >= 0; k--) { |
| pFrameInfo->freqRes[k] = FDKreadBits (hBs, 1); /* f = F [1 bits] */ |
| } |
| |
| |
| /* Calculate noise floor middle border: */ |
| if (p == 0 || p == 1) |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[n]; |
| else |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[pFrameInfo->tranEnv]; |
| |
| break; |
| |
| case 2: |
| /* Decode borders: */ |
| border = temp; /* A -> aL */ |
| pFrameInfo->borders[0] = border; /* first border */ |
| |
| for (k = 1; k <= n; k++) { |
| temp = FDKreadBits (hBs, 2);/* R [2 bits] */ |
| border += (2 * temp + 2); /* R -> r */ |
| pFrameInfo->borders[k] = border; |
| } |
| pFrameInfo->borders[k] = numberTimeSlots; /* last border */ |
| |
| |
| /* Decode pointer: */ |
| pointer_bits = DFRACT_BITS - 1 - CountLeadingBits((FIXP_DBL)(n+1)); |
| p = FDKreadBits (hBs, pointer_bits); /* p = P [pointer_bits bits] */ |
| if (p > n+1) |
| return 0; |
| |
| if (p == 0 || p == 1) |
| pFrameInfo->tranEnv = -1; |
| else |
| pFrameInfo->tranEnv = p - 1; |
| |
| |
| |
| /* Decode freq res: */ |
| for (k = 0; k <= n; k++) { |
| pFrameInfo->freqRes[k] = FDKreadBits(hBs, 1); /* f = F [1 bits] */ |
| } |
| |
| |
| |
| /* Calculate noise floor middle border: */ |
| switch (p) { |
| case 0: |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[1]; |
| break; |
| case 1: |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[n]; |
| break; |
| default: |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[pFrameInfo->tranEnv]; |
| break; |
| } |
| |
| break; |
| |
| case 3: |
| /* v_ctrlSignal = [frameClass,aL,aR,nL,nR,v_rL,v_rR,p,v_fLR]; */ |
| |
| aL = FDKreadBits (hBs, 2); /* AL [2 bits], AL -> aL */ |
| |
| aR = FDKreadBits (hBs, 2) + numberTimeSlots; /* AR [2 bits], AR -> aR */ |
| |
| nL = FDKreadBits (hBs, 2); /* nL = NL [2 bits] */ |
| |
| nR = FDKreadBits (hBs, 2); /* nR = NR [2 bits] */ |
| |
| |
| |
| /*------------------------------------------------------------------------- |
| Calculate help variables |
| --------------------------------------------------------------------------*/ |
| |
| /* general: */ |
| nEnv = nL + nR + 1; /* # envelopes */ |
| if (nEnv > MAX_ENVELOPES) |
| return 0; |
| b = nEnv + 1; /* # borders */ |
| |
| |
| |
| /*------------------------------------------------------------------------- |
| Decode envelopes |
| --------------------------------------------------------------------------*/ |
| |
| |
| /* L-borders: */ |
| border = aL; /* first border */ |
| pFrameInfo->borders[0] = border; |
| |
| for (k = 1; k <= nL; k++) { |
| temp = FDKreadBits (hBs, 2);/* R [2 bits] */ |
| border += (2 * temp + 2); /* R -> r */ |
| pFrameInfo->borders[k] = border; |
| } |
| |
| |
| /* R-borders: */ |
| border = aR; /* last border */ |
| i = nEnv; |
| |
| pFrameInfo->borders[i] = border; |
| |
| for (k = 0; k < nR; k++) { |
| temp = FDKreadBits (hBs, 2);/* R [2 bits] */ |
| border -= (2 * temp + 2); /* R -> r */ |
| pFrameInfo->borders[--i] = border; |
| } |
| |
| |
| /* decode pointer: */ |
| pointer_bits = DFRACT_BITS - 1 - CountLeadingBits((FIXP_DBL)(nL+nR+1)); |
| p = FDKreadBits (hBs, pointer_bits); /* p = P [pointer_bits bits] */ |
| |
| if (p > nL+nR+1) |
| return 0; |
| |
| pFrameInfo->tranEnv = p ? b - p : -1; |
| |
| |
| |
| /* decode freq res: */ |
| for (k = 0; k < nEnv; k++) { |
| pFrameInfo->freqRes[k] = FDKreadBits(hBs, 1); /* f = F [1 bits] */ |
| } |
| |
| |
| |
| /*------------------------------------------------------------------------- |
| Decode noise floors |
| --------------------------------------------------------------------------*/ |
| pFrameInfo->bordersNoise[0] = aL; |
| |
| if (nEnv == 1) { |
| /* 1 noise floor envelope: */ |
| pFrameInfo->bordersNoise[1] = aR; |
| } |
| else { |
| /* 2 noise floor envelopes */ |
| if (p == 0 || p == 1) |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[nEnv - 1]; |
| else |
| pFrameInfo->bordersNoise[1] = pFrameInfo->borders[pFrameInfo->tranEnv]; |
| pFrameInfo->bordersNoise[2] = aR; |
| } |
| break; |
| } |
| |
| |
| /* |
| Store number of envelopes, noise floor envelopes and frame class |
| */ |
| pFrameInfo->nEnvelopes = nEnv; |
| |
| if (nEnv == 1) |
| pFrameInfo->nNoiseEnvelopes = 1; |
| else |
| pFrameInfo->nNoiseEnvelopes = 2; |
| |
| pFrameInfo->frameClass = frameClass; |
| |
| if (pFrameInfo->frameClass == 2 || pFrameInfo->frameClass == 1) { |
| /* calculate noise floor first and last borders: */ |
| pFrameInfo->bordersNoise[0] = pFrameInfo->borders[0]; |
| pFrameInfo->bordersNoise[pFrameInfo->nNoiseEnvelopes] = pFrameInfo->borders[nEnv]; |
| } |
| |
| |
| return 1; |
| } |
| |
| |
| /*! |
| \brief Check if the frameInfo vector has reasonable values. |
| \return Zero for error, one for correct |
| */ |
| static int |
| checkFrameInfo (FRAME_INFO * pFrameInfo, /*!< pointer to frameInfo */ |
| int numberOfTimeSlots, /*!< QMF time slots per frame */ |
| int overlap, /*!< Amount of overlap QMF time slots */ |
| int timeStep) /*!< QMF slots to SBR slots step factor */ |
| { |
| int maxPos,i,j; |
| int startPos; |
| int stopPos; |
| int tranEnv; |
| int startPosNoise; |
| int stopPosNoise; |
| int nEnvelopes = pFrameInfo->nEnvelopes; |
| int nNoiseEnvelopes = pFrameInfo->nNoiseEnvelopes; |
| |
| if(nEnvelopes < 1 || nEnvelopes > MAX_ENVELOPES) |
| return 0; |
| |
| if(nNoiseEnvelopes > MAX_NOISE_ENVELOPES) |
| return 0; |
| |
| startPos = pFrameInfo->borders[0]; |
| stopPos = pFrameInfo->borders[nEnvelopes]; |
| tranEnv = pFrameInfo->tranEnv; |
| startPosNoise = pFrameInfo->bordersNoise[0]; |
| stopPosNoise = pFrameInfo->bordersNoise[nNoiseEnvelopes]; |
| |
| if (overlap < 0 || overlap > (6)) { |
| return 0; |
| } |
| if (timeStep < 1 || timeStep > 2) { |
| return 0; |
| } |
| maxPos = numberOfTimeSlots + (overlap/timeStep); |
| |
| /* Check that the start and stop positions of the frame are reasonable values. */ |
| if( (startPos < 0) || (startPos >= stopPos) ) |
| return 0; |
| if( startPos > maxPos-numberOfTimeSlots ) /* First env. must start in or directly after the overlap buffer */ |
| return 0; |
| if( stopPos < numberOfTimeSlots ) /* One complete frame must be ready for output after processing */ |
| return 0; |
| if(stopPos > maxPos) |
| return 0; |
| |
| /* Check that the start border for every envelope is strictly later in time */ |
| for(i=0;i<nEnvelopes;i++) { |
| if(pFrameInfo->borders[i] >= pFrameInfo->borders[i+1]) |
| return 0; |
| } |
| |
| /* Check that the envelope to be shortened is actually among the envelopes */ |
| if(tranEnv>nEnvelopes) |
| return 0; |
| |
| |
| /* Check the noise borders */ |
| if(nEnvelopes==1 && nNoiseEnvelopes>1) |
| return 0; |
| |
| if(startPos != startPosNoise || stopPos != stopPosNoise) |
| return 0; |
| |
| |
| /* Check that the start border for every noise-envelope is strictly later in time*/ |
| for(i=0; i<nNoiseEnvelopes; i++) { |
| if(pFrameInfo->bordersNoise[i] >= pFrameInfo->bordersNoise[i+1]) |
| return 0; |
| } |
| |
| /* Check that every noise border is the same as an envelope border*/ |
| for(i=0; i<nNoiseEnvelopes; i++) { |
| startPosNoise = pFrameInfo->bordersNoise[i]; |
| |
| for(j=0; j<nEnvelopes; j++) { |
| if(pFrameInfo->borders[j] == startPosNoise) |
| break; |
| } |
| if(j==nEnvelopes) |
| return 0; |
| } |
| |
| return 1; |
| } |
