| |
| /* ----------------------------------------------------------------------------------------------------------- |
| Software License for The Fraunhofer FDK AAC Codec Library for Android |
| |
| © Copyright 1995 - 2012 Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. |
| All rights reserved. |
| |
| 1. INTRODUCTION |
| The Fraunhofer FDK AAC Codec Library for Android ("FDK AAC Codec") is software that implements |
| the MPEG Advanced Audio Coding ("AAC") encoding and decoding scheme for digital audio. |
| This FDK AAC Codec software is intended to be used on a wide variety of Android devices. |
| |
| AAC's HE-AAC and HE-AAC v2 versions are regarded as today's most efficient general perceptual |
| audio codecs. AAC-ELD is considered the best-performing full-bandwidth communications codec by |
| independent studies and is widely deployed. AAC has been standardized by ISO and IEC as part |
| of the MPEG specifications. |
| |
| Patent licenses for necessary patent claims for the FDK AAC Codec (including those of Fraunhofer) |
| may be obtained through Via Licensing (www.vialicensing.com) or through the respective patent owners |
| individually for the purpose of encoding or decoding bit streams in products that are compliant with |
| the ISO/IEC MPEG audio standards. Please note that most manufacturers of Android devices already license |
| these patent claims through Via Licensing or directly from the patent owners, and therefore FDK AAC Codec |
| software may already be covered under those patent licenses when it is used for those licensed purposes only. |
| |
| Commercially-licensed AAC software libraries, including floating-point versions with enhanced sound quality, |
| are also available from Fraunhofer. Users are encouraged to check the Fraunhofer website for additional |
| applications information and documentation. |
| |
| 2. COPYRIGHT LICENSE |
| |
| Redistribution and use in source and binary forms, with or without modification, are permitted without |
| payment of copyright license fees provided that you satisfy the following conditions: |
| |
| You must retain the complete text of this software license in redistributions of the FDK AAC Codec or |
| your modifications thereto in source code form. |
| |
| You must retain the complete text of this software license in the documentation and/or other materials |
| provided with redistributions of the FDK AAC Codec or your modifications thereto in binary form. |
| You must make available free of charge copies of the complete source code of the FDK AAC Codec and your |
| modifications thereto to recipients of copies in binary form. |
| |
| The name of Fraunhofer may not be used to endorse or promote products derived from this library without |
| prior written permission. |
| |
| You may not charge copyright license fees for anyone to use, copy or distribute the FDK AAC Codec |
| software or your modifications thereto. |
| |
| Your modified versions of the FDK AAC Codec must carry prominent notices stating that you changed the software |
| and the date of any change. For modified versions of the FDK AAC Codec, the term |
| "Fraunhofer FDK AAC Codec Library for Android" must be replaced by the term |
| "Third-Party Modified Version of the Fraunhofer FDK AAC Codec Library for Android." |
| |
| 3. NO PATENT LICENSE |
| |
| NO EXPRESS OR IMPLIED LICENSES TO ANY PATENT CLAIMS, including without limitation the patents of Fraunhofer, |
| ARE GRANTED BY THIS SOFTWARE LICENSE. Fraunhofer provides no warranty of patent non-infringement with |
| respect to this software. |
| |
| You may use this FDK AAC Codec software or modifications thereto only for purposes that are authorized |
| by appropriate patent licenses. |
| |
| 4. DISCLAIMER |
| |
| This FDK AAC Codec software is provided by Fraunhofer on behalf of the copyright holders and contributors |
| "AS IS" and WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, including but not limited to the implied warranties |
| of merchantability and fitness for a particular purpose. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR |
| CONTRIBUTORS BE LIABLE for any direct, indirect, incidental, special, exemplary, or consequential damages, |
| including but not limited to procurement of substitute goods or services; loss of use, data, or profits, |
| or business interruption, however caused and on any theory of liability, whether in contract, strict |
| liability, or tort (including negligence), arising in any way out of the use of this software, even if |
| advised of the possibility of such damage. |
| |
| 5. CONTACT INFORMATION |
| |
| Fraunhofer Institute for Integrated Circuits IIS |
| Attention: Audio and Multimedia Departments - FDK AAC LL |
| Am Wolfsmantel 33 |
| 91058 Erlangen, Germany |
| |
| www.iis.fraunhofer.de/amm |
| amm-info@iis.fraunhofer.de |
| ----------------------------------------------------------------------------------------------------------- */ |
| |
| /*! |
| \file |
| \brief Sbr decoder |
| This module provides the actual decoder implementation. The SBR data (side information) is already |
| decoded. Only three functions are provided: |
| |
| \li 1.) createSbrDec(): One time initialization |
| \li 2.) resetSbrDec(): Called by sbr_Apply() when the information contained in an SBR_HEADER_ELEMENT requires a reset |
| and recalculation of important SBR structures. |
| \li 3.) sbr_dec(): The actual decoder. Calls the different tools such as filterbanks, lppTransposer(), and calculateSbrEnvelope() |
| [the envelope adjuster]. |
| |
| \sa sbr_dec(), \ref documentationOverview |
| */ |
| |
| #include "sbr_dec.h" |
| |
| #include "sbr_ram.h" |
| #include "env_extr.h" |
| #include "env_calc.h" |
| #include "scale.h" |
| |
| #include "genericStds.h" |
| |
| #include "sbrdec_drc.h" |
| |
| |
| |
| static void assignLcTimeSlots( HANDLE_SBR_DEC hSbrDec, /*!< handle to Decoder channel */ |
| FIXP_DBL **QmfBufferReal, |
| int noCols ) |
| { |
| int slot, i; |
| FIXP_DBL *ptr; |
| |
| /* Number of QMF timeslots in the overlap buffer: */ |
| ptr = hSbrDec->pSbrOverlapBuffer; |
| for(slot=0; slot<hSbrDec->LppTrans.pSettings->overlap; slot++) { |
| QmfBufferReal[slot] = ptr; ptr += (64); |
| } |
| |
| /* Assign timeslots to Workbuffer1 */ |
| ptr = hSbrDec->WorkBuffer1; |
| for(i=0; i<noCols; i++) { |
| QmfBufferReal[slot] = ptr; ptr += (64); |
| slot++; |
| } |
| } |
| |
| |
| static void assignHqTimeSlots( HANDLE_SBR_DEC hSbrDec, /*!< handle to Decoder channel */ |
| FIXP_DBL **QmfBufferReal, |
| FIXP_DBL **QmfBufferImag, |
| int noCols ) |
| { |
| FIXP_DBL *ptr; |
| int slot; |
| |
| /* Number of QMF timeslots in one half of a frame (size of Workbuffer1 or 2): */ |
| int halflen = (noCols >> 1) + hSbrDec->LppTrans.pSettings->overlap; |
| int totCols = noCols + hSbrDec->LppTrans.pSettings->overlap; |
| |
| /* Number of QMF timeslots in the overlap buffer: */ |
| ptr = hSbrDec->pSbrOverlapBuffer; |
| for(slot=0; slot<hSbrDec->LppTrans.pSettings->overlap; slot++) { |
| QmfBufferReal[slot] = ptr; ptr += (64); |
| QmfBufferImag[slot] = ptr; ptr += (64); |
| } |
| |
| /* Assign first half of timeslots to Workbuffer1 */ |
| ptr = hSbrDec->WorkBuffer1; |
| for(; slot<halflen; slot++) { |
| QmfBufferReal[slot] = ptr; ptr += (64); |
| QmfBufferImag[slot] = ptr; ptr += (64); |
| } |
| |
| /* Assign second half of timeslots to Workbuffer2 */ |
| ptr = hSbrDec->WorkBuffer2; |
| for(; slot<totCols; slot++) { |
| QmfBufferReal[slot] = ptr; ptr += (64); |
| QmfBufferImag[slot] = ptr; ptr += (64); |
| } |
| } |
| |
| |
| static void assignTimeSlots( HANDLE_SBR_DEC hSbrDec, /*!< handle to Decoder channel */ |
| int noCols, |
| int useLP ) |
| { |
| /* assign qmf time slots */ |
| hSbrDec->useLP = useLP; |
| if (useLP) { |
| hSbrDec->SynthesisQMF.flags |= QMF_FLAG_LP; |
| hSbrDec->AnalysiscQMF.flags |= QMF_FLAG_LP; |
| } else { |
| hSbrDec->SynthesisQMF.flags &= ~QMF_FLAG_LP; |
| hSbrDec->AnalysiscQMF.flags &= ~QMF_FLAG_LP; |
| } |
| if (!useLP) |
| assignHqTimeSlots( hSbrDec, hSbrDec->QmfBufferReal, hSbrDec->QmfBufferImag, noCols ); |
| else |
| { |
| assignLcTimeSlots( hSbrDec, hSbrDec->QmfBufferReal, noCols ); |
| } |
| } |
| |
| static void changeQmfType( HANDLE_SBR_DEC hSbrDec, /*!< handle to Decoder channel */ |
| int useLdTimeAlign ) |
| { |
| UINT synQmfFlags = hSbrDec->SynthesisQMF.flags; |
| UINT anaQmfFlags = hSbrDec->AnalysiscQMF.flags; |
| int resetSynQmf = 0; |
| int resetAnaQmf = 0; |
| |
| /* assign qmf type */ |
| if (useLdTimeAlign) { |
| if (synQmfFlags & QMF_FLAG_CLDFB) { |
| /* change the type to MPSLD */ |
| synQmfFlags &= ~QMF_FLAG_CLDFB; |
| synQmfFlags |= QMF_FLAG_MPSLDFB; |
| resetSynQmf = 1; |
| } |
| if (anaQmfFlags & QMF_FLAG_CLDFB) { |
| /* change the type to MPSLD */ |
| anaQmfFlags &= ~QMF_FLAG_CLDFB; |
| anaQmfFlags |= QMF_FLAG_MPSLDFB; |
| resetAnaQmf = 1; |
| } |
| } else { |
| if (synQmfFlags & QMF_FLAG_MPSLDFB) { |
| /* change the type to CLDFB */ |
| synQmfFlags &= ~QMF_FLAG_MPSLDFB; |
| synQmfFlags |= QMF_FLAG_CLDFB; |
| resetSynQmf = 1; |
| } |
| if (anaQmfFlags & QMF_FLAG_MPSLDFB) { |
| /* change the type to CLDFB */ |
| anaQmfFlags &= ~QMF_FLAG_MPSLDFB; |
| anaQmfFlags |= QMF_FLAG_CLDFB; |
| resetAnaQmf = 1; |
| } |
| } |
| |
| if (resetAnaQmf) { |
| int qmfErr = qmfInitAnalysisFilterBank ( |
| &hSbrDec->AnalysiscQMF, |
| hSbrDec->anaQmfStates, |
| hSbrDec->AnalysiscQMF.no_col, |
| hSbrDec->AnalysiscQMF.lsb, |
| hSbrDec->AnalysiscQMF.usb, |
| hSbrDec->AnalysiscQMF.no_channels, |
| anaQmfFlags | QMF_FLAG_KEEP_STATES |
| ); |
| if (qmfErr != 0) { |
| FDK_ASSERT(0); |
| } |
| } |
| |
| if (resetSynQmf) { |
| int qmfErr = qmfInitSynthesisFilterBank ( |
| &hSbrDec->SynthesisQMF, |
| hSbrDec->pSynQmfStates, |
| hSbrDec->SynthesisQMF.no_col, |
| hSbrDec->SynthesisQMF.lsb, |
| hSbrDec->SynthesisQMF.usb, |
| hSbrDec->SynthesisQMF.no_channels, |
| synQmfFlags | QMF_FLAG_KEEP_STATES |
| ); |
| |
| if (qmfErr != 0) { |
| FDK_ASSERT(0); |
| } |
| } |
| } |
| |
| |
| /*! |
| \brief SBR decoder core function for one channel |
| |
| \image html BufferMgmtDetailed-1632.png |
| |
| Besides the filter states of the QMF filter bank and the LPC-states of |
| the LPP-Transposer, processing is mainly based on four buffers: |
| #timeIn, #timeOut, #WorkBuffer2 and #OverlapBuffer. The #WorkBuffer2 |
| is reused for all channels and might be used by the core decoder, a |
| static overlap buffer is required for each channel. Du to in-place |
| processing, #timeIn and #timeOut point to identical locations. |
| |
| The spectral data is organized in so-called slots, each slot |
| containing 64 bands of complex data. The number of slots per frame is |
| dependend on the frame size. For mp3PRO, there are 18 slots per frame |
| and 6 slots per #OverlapBuffer. It is not necessary to have the slots |
| in located consecutive address ranges. |
| |
| To optimize memory usage and to minimize the number of memory |
| accesses, the memory management is organized as follows (Slot numbers |
| based on mp3PRO): |
| |
| 1.) Input time domain signal is located in #timeIn, the last slots |
| (0..5) of the spectral data of the previous frame are located in the |
| #OverlapBuffer. In addition, #frameData of the current frame resides |
| in the upper part of #timeIn. |
| |
| 2.) During the cplxAnalysisQmfFiltering(), 32 samples from #timeIn are transformed |
| into a slot of up to 32 complex spectral low band values at a |
| time. The first spectral slot -- nr. 6 -- is written at slot number |
| zero of #WorkBuffer2. #WorkBuffer2 will be completely filled with |
| spectral data. |
| |
| 3.) LPP-Transposition in lppTransposer() is processed on 24 slots. During the |
| transposition, the high band part of the spectral data is replicated |
| based on the low band data. |
| |
| Envelope Adjustment is processed on the high band part of the spectral |
| data only by calculateSbrEnvelope(). |
| |
| 4.) The cplxSynthesisQmfFiltering() creates 64 time domain samples out |
| of a slot of 64 complex spectral values at a time. The first 6 slots |
| in #timeOut are filled from the results of spectral slots 0..5 in the |
| #OverlapBuffer. The consecutive slots in timeOut are now filled with |
| the results of spectral slots 6..17. |
| |
| 5.) The preprocessed slots 18..23 have to be stored in the |
| #OverlapBuffer. |
| |
| */ |
| |
| void |
| sbr_dec ( HANDLE_SBR_DEC hSbrDec, /*!< handle to Decoder channel */ |
| INT_PCM *timeIn, /*!< pointer to input time signal */ |
| INT_PCM *timeOut, /*!< pointer to output time signal */ |
| HANDLE_SBR_DEC hSbrDecRight, /*!< handle to Decoder channel right */ |
| INT_PCM *timeOutRight, /*!< pointer to output time signal */ |
| const int strideIn, /*!< Time data traversal strideIn */ |
| const int strideOut, /*!< Time data traversal strideOut */ |
| HANDLE_SBR_HEADER_DATA hHeaderData,/*!< Static control data */ |
| HANDLE_SBR_FRAME_DATA hFrameData, /*!< Control data of current frame */ |
| HANDLE_SBR_PREV_FRAME_DATA hPrevFrameData, /*!< Some control data of last frame */ |
| const int applyProcessing, /*!< Flag for SBR operation */ |
| HANDLE_PS_DEC h_ps_d, |
| const UINT flags |
| ) |
| { |
| int i, slot, reserve; |
| int saveLbScale; |
| int ov_len; |
| int lastSlotOffs; |
| FIXP_DBL maxVal; |
| |
| /* 1+1/3 frames of spectral data: */ |
| FIXP_DBL **QmfBufferReal = hSbrDec->QmfBufferReal; |
| FIXP_DBL **QmfBufferImag = hSbrDec->QmfBufferImag; |
| |
| /* Number of QMF timeslots in the overlap buffer: */ |
| ov_len = hSbrDec->LppTrans.pSettings->overlap; |
| |
| /* Number of QMF slots per frame */ |
| int noCols = hHeaderData->numberTimeSlots * hHeaderData->timeStep; |
| |
| /* assign qmf time slots */ |
| if ( ((flags & SBRDEC_LOW_POWER ) ? 1 : 0) != ((hSbrDec->SynthesisQMF.flags & QMF_FLAG_LP) ? 1 : 0) ) { |
| assignTimeSlots( hSbrDec, hHeaderData->numberTimeSlots * hHeaderData->timeStep, flags & SBRDEC_LOW_POWER); |
| } |
| |
| if (flags & SBRDEC_ELD_GRID) { |
| /* Choose the right low delay filter bank */ |
| changeQmfType( hSbrDec, (flags & SBRDEC_LD_MPS_QMF) ? 1 : 0 ); |
| } |
| |
| /* |
| low band codec signal subband filtering |
| */ |
| |
| { |
| C_AALLOC_SCRATCH_START(qmfTemp, FIXP_DBL, 2*(64)); |
| |
| qmfAnalysisFiltering( &hSbrDec->AnalysiscQMF, |
| QmfBufferReal + ov_len, |
| QmfBufferImag + ov_len, |
| &hSbrDec->sbrScaleFactor, |
| timeIn, |
| strideIn, |
| qmfTemp |
| ); |
| |
| C_AALLOC_SCRATCH_END(qmfTemp, FIXP_DBL, 2*(64)); |
| } |
| |
| /* |
| Clear upper half of spectrum |
| */ |
| { |
| int nAnalysisBands = hHeaderData->numberOfAnalysisBands; |
| |
| if (! (flags & SBRDEC_LOW_POWER)) { |
| for (slot = ov_len; slot < noCols+ov_len; slot++) { |
| FDKmemclear(&QmfBufferReal[slot][nAnalysisBands],((64)-nAnalysisBands)*sizeof(FIXP_DBL)); |
| FDKmemclear(&QmfBufferImag[slot][nAnalysisBands],((64)-nAnalysisBands)*sizeof(FIXP_DBL)); |
| } |
| } else |
| for (slot = ov_len; slot < noCols+ov_len; slot++) { |
| FDKmemclear(&QmfBufferReal[slot][nAnalysisBands],((64)-nAnalysisBands)*sizeof(FIXP_DBL)); |
| } |
| } |
| |
| |
| |
| /* |
| Shift spectral data left to gain accuracy in transposer and adjustor |
| */ |
| maxVal = maxSubbandSample( QmfBufferReal, |
| (flags & SBRDEC_LOW_POWER) ? NULL : QmfBufferImag, |
| 0, |
| hSbrDec->AnalysiscQMF.lsb, |
| ov_len, |
| noCols+ov_len ); |
| |
| reserve = fixMax(0,CntLeadingZeros(maxVal)-1) ; |
| reserve = fixMin(reserve,DFRACT_BITS-1-hSbrDec->sbrScaleFactor.lb_scale); |
| |
| /* If all data is zero, lb_scale could become too large */ |
| rescaleSubbandSamples( QmfBufferReal, |
| (flags & SBRDEC_LOW_POWER) ? NULL : QmfBufferImag, |
| 0, |
| hSbrDec->AnalysiscQMF.lsb, |
| ov_len, |
| noCols+ov_len, |
| reserve); |
| |
| hSbrDec->sbrScaleFactor.lb_scale += reserve; |
| |
| /* |
| save low band scale, wavecoding or parametric stereo may modify it |
| */ |
| saveLbScale = hSbrDec->sbrScaleFactor.lb_scale; |
| |
| |
| if (applyProcessing) |
| { |
| UCHAR * borders = hFrameData->frameInfo.borders; |
| lastSlotOffs = borders[hFrameData->frameInfo.nEnvelopes] - hHeaderData->numberTimeSlots; |
| |
| FIXP_DBL degreeAlias[(64)]; |
| |
| /* The transposer will override most values in degreeAlias[]. |
| The array needs to be cleared at least from lowSubband to highSubband before. */ |
| if (flags & SBRDEC_LOW_POWER) |
| FDKmemclear(°reeAlias[hHeaderData->freqBandData.lowSubband], (hHeaderData->freqBandData.highSubband-hHeaderData->freqBandData.lowSubband)*sizeof(FIXP_DBL)); |
| |
| /* |
| Inverse filtering of lowband and transposition into the SBR-frequency range |
| */ |
| |
| lppTransposer ( &hSbrDec->LppTrans, |
| &hSbrDec->sbrScaleFactor, |
| QmfBufferReal, |
| degreeAlias, // only used if useLP = 1 |
| QmfBufferImag, |
| flags & SBRDEC_LOW_POWER, |
| hHeaderData->timeStep, |
| borders[0], |
| lastSlotOffs, |
| hHeaderData->freqBandData.nInvfBands, |
| hFrameData->sbr_invf_mode, |
| hPrevFrameData->sbr_invf_mode ); |
| |
| |
| |
| |
| |
| /* |
| Adjust envelope of current frame. |
| */ |
| |
| calculateSbrEnvelope (&hSbrDec->sbrScaleFactor, |
| &hSbrDec->SbrCalculateEnvelope, |
| hHeaderData, |
| hFrameData, |
| QmfBufferReal, |
| QmfBufferImag, |
| flags & SBRDEC_LOW_POWER, |
| |
| degreeAlias, |
| flags, |
| (hHeaderData->frameErrorFlag || hPrevFrameData->frameErrorFlag)); |
| |
| |
| /* |
| Update hPrevFrameData (to be used in the next frame) |
| */ |
| for (i=0; i<hHeaderData->freqBandData.nInvfBands; i++) { |
| hPrevFrameData->sbr_invf_mode[i] = hFrameData->sbr_invf_mode[i]; |
| } |
| hPrevFrameData->coupling = hFrameData->coupling; |
| hPrevFrameData->stopPos = borders[hFrameData->frameInfo.nEnvelopes]; |
| hPrevFrameData->ampRes = hFrameData->ampResolutionCurrentFrame; |
| } |
| else { |
| /* Reset hb_scale if no highband is present, because hb_scale is considered in the QMF-synthesis */ |
| hSbrDec->sbrScaleFactor.hb_scale = saveLbScale; |
| } |
| |
| |
| for (i=0; i<LPC_ORDER; i++){ |
| /* |
| Store the unmodified qmf Slots values (required for LPC filtering) |
| */ |
| if (! (flags & SBRDEC_LOW_POWER)) { |
| FDKmemcpy(hSbrDec->LppTrans.lpcFilterStatesReal[i], QmfBufferReal[noCols-LPC_ORDER+i], hSbrDec->AnalysiscQMF.lsb*sizeof(FIXP_DBL)); |
| FDKmemcpy(hSbrDec->LppTrans.lpcFilterStatesImag[i], QmfBufferImag[noCols-LPC_ORDER+i], hSbrDec->AnalysiscQMF.lsb*sizeof(FIXP_DBL)); |
| } else |
| FDKmemcpy(hSbrDec->LppTrans.lpcFilterStatesReal[i], QmfBufferReal[noCols-LPC_ORDER+i], hSbrDec->AnalysiscQMF.lsb*sizeof(FIXP_DBL)); |
| } |
| |
| /* |
| Synthesis subband filtering. |
| */ |
| |
| if ( ! (flags & SBRDEC_PS_DECODED) ) { |
| |
| { |
| int outScalefactor = 0; |
| |
| if (h_ps_d != NULL) { |
| h_ps_d->procFrameBased = 1; /* we here do frame based processing */ |
| } |
| |
| |
| sbrDecoder_drcApply(&hSbrDec->sbrDrcChannel, |
| QmfBufferReal, |
| (flags & SBRDEC_LOW_POWER) ? NULL : QmfBufferImag, |
| hSbrDec->SynthesisQMF.no_col, |
| &outScalefactor |
| ); |
| |
| |
| |
| qmfChangeOutScalefactor(&hSbrDec->SynthesisQMF, outScalefactor ); |
| |
| { |
| C_AALLOC_SCRATCH_START(qmfTemp, FIXP_DBL, 2*(64)); |
| |
| qmfSynthesisFiltering( &hSbrDec->SynthesisQMF, |
| QmfBufferReal, |
| (flags & SBRDEC_LOW_POWER) ? NULL : QmfBufferImag, |
| &hSbrDec->sbrScaleFactor, |
| hSbrDec->LppTrans.pSettings->overlap, |
| timeOut, |
| strideOut, |
| qmfTemp); |
| |
| C_AALLOC_SCRATCH_END(qmfTemp, FIXP_DBL, 2*(64)); |
| } |
| |
| } |
| |
| } else { /* (flags & SBRDEC_PS_DECODED) */ |
| INT i, sdiff, outScalefactor, scaleFactorLowBand, scaleFactorHighBand; |
| SCHAR scaleFactorLowBand_ov, scaleFactorLowBand_no_ov; |
| |
| HANDLE_QMF_FILTER_BANK synQmf = &hSbrDec->SynthesisQMF; |
| HANDLE_QMF_FILTER_BANK synQmfRight = &hSbrDecRight->SynthesisQMF; |
| |
| /* adapt scaling */ |
| sdiff = hSbrDec->sbrScaleFactor.lb_scale - reserve; /* Scaling difference */ |
| scaleFactorHighBand = sdiff - hSbrDec->sbrScaleFactor.hb_scale; /* Scale of current high band */ |
| scaleFactorLowBand_ov = sdiff - hSbrDec->sbrScaleFactor.ov_lb_scale; /* Scale of low band overlapping QMF data */ |
| scaleFactorLowBand_no_ov = sdiff - hSbrDec->sbrScaleFactor.lb_scale; /* Scale of low band current QMF data */ |
| outScalefactor = 0; /* Initial output scale */ |
| |
| if (h_ps_d->procFrameBased == 1) /* If we have switched from frame to slot based processing copy filter states */ |
| { /* procFrameBased will be unset later */ |
| /* copy filter states from left to right */ |
| FDKmemcpy(synQmfRight->FilterStates, synQmf->FilterStates, ((640)-(64))*sizeof(FIXP_QSS)); |
| } |
| |
| /* scale ALL qmf vales ( real and imag ) of mono / left channel to the |
| same scale factor ( ov_lb_sf, lb_sf and hq_sf ) */ |
| scalFilterBankValues( h_ps_d, /* parametric stereo decoder handle */ |
| QmfBufferReal, /* qmf filterbank values */ |
| QmfBufferImag, /* qmf filterbank values */ |
| synQmf->lsb, /* sbr start subband */ |
| hSbrDec->sbrScaleFactor.ov_lb_scale, |
| hSbrDec->sbrScaleFactor.lb_scale, |
| &scaleFactorLowBand_ov, /* adapt scaling values */ |
| &scaleFactorLowBand_no_ov, /* adapt scaling values */ |
| hSbrDec->sbrScaleFactor.hb_scale, /* current frame ( highband ) */ |
| &scaleFactorHighBand, |
| synQmf->no_col); |
| |
| /* use the same synthese qmf values for left and right channel */ |
| synQmfRight->no_col = synQmf->no_col; |
| synQmfRight->lsb = synQmf->lsb; |
| synQmfRight->usb = synQmf->usb; |
| |
| int env=0; |
| |
| outScalefactor += (SCAL_HEADROOM+1); /* psDiffScale! */ |
| |
| { |
| C_AALLOC_SCRATCH_START(pWorkBuffer, FIXP_DBL, 2*(64)); |
| |
| int maxShift = 0; |
| |
| if (hSbrDec->sbrDrcChannel.enable != 0) { |
| if (hSbrDec->sbrDrcChannel.prevFact_exp > maxShift) { |
| maxShift = hSbrDec->sbrDrcChannel.prevFact_exp; |
| } |
| if (hSbrDec->sbrDrcChannel.currFact_exp > maxShift) { |
| maxShift = hSbrDec->sbrDrcChannel.currFact_exp; |
| } |
| if (hSbrDec->sbrDrcChannel.nextFact_exp > maxShift) { |
| maxShift = hSbrDec->sbrDrcChannel.nextFact_exp; |
| } |
| } |
| |
| /* copy DRC data to right channel (with PS both channels use the same DRC gains) */ |
| FDKmemcpy(&hSbrDecRight->sbrDrcChannel, &hSbrDec->sbrDrcChannel, sizeof(SBRDEC_DRC_CHANNEL)); |
| |
| for (i = 0; i < synQmf->no_col; i++) { /* ----- no_col loop ----- */ |
| |
| INT outScalefactorR, outScalefactorL; |
| outScalefactorR = outScalefactorL = outScalefactor; |
| |
| /* qmf timeslot of right channel */ |
| FIXP_DBL* rQmfReal = pWorkBuffer; |
| FIXP_DBL* rQmfImag = pWorkBuffer + 64; |
| |
| |
| { |
| if ( i == h_ps_d->bsData[h_ps_d->processSlot].mpeg.aEnvStartStop[env] ) { |
| initSlotBasedRotation( h_ps_d, env, hHeaderData->freqBandData.highSubband ); |
| env++; |
| } |
| |
| ApplyPsSlot( h_ps_d, /* parametric stereo decoder handle */ |
| (QmfBufferReal + i), /* one timeslot of left/mono channel */ |
| (QmfBufferImag + i), /* one timeslot of left/mono channel */ |
| rQmfReal, /* one timeslot or right channel */ |
| rQmfImag); /* one timeslot or right channel */ |
| } |
| |
| |
| scaleFactorLowBand = (i<(6)) ? scaleFactorLowBand_ov : scaleFactorLowBand_no_ov; |
| |
| |
| sbrDecoder_drcApplySlot ( /* right channel */ |
| &hSbrDecRight->sbrDrcChannel, |
| rQmfReal, |
| rQmfImag, |
| i, |
| synQmfRight->no_col, |
| maxShift |
| ); |
| |
| outScalefactorR += maxShift; |
| |
| sbrDecoder_drcApplySlot ( /* left channel */ |
| &hSbrDec->sbrDrcChannel, |
| *(QmfBufferReal + i), |
| *(QmfBufferImag + i), |
| i, |
| synQmf->no_col, |
| maxShift |
| ); |
| |
| outScalefactorL += maxShift; |
| |
| |
| /* scale filter states for left and right channel */ |
| qmfChangeOutScalefactor( synQmf, outScalefactorL ); |
| qmfChangeOutScalefactor( synQmfRight, outScalefactorR ); |
| |
| { |
| |
| qmfSynthesisFilteringSlot( synQmfRight, |
| rQmfReal, /* QMF real buffer */ |
| rQmfImag, /* QMF imag buffer */ |
| scaleFactorLowBand, |
| scaleFactorHighBand, |
| timeOutRight+(i*synQmf->no_channels*strideOut), |
| strideOut, |
| pWorkBuffer); |
| |
| qmfSynthesisFilteringSlot( synQmf, |
| *(QmfBufferReal + i), /* QMF real buffer */ |
| *(QmfBufferImag + i), /* QMF imag buffer */ |
| scaleFactorLowBand, |
| scaleFactorHighBand, |
| timeOut+(i*synQmf->no_channels*strideOut), |
| strideOut, |
| pWorkBuffer); |
| |
| } |
| } /* no_col loop i */ |
| |
| /* scale back (6) timeslots look ahead for hybrid filterbank to original value */ |
| rescalFilterBankValues( h_ps_d, |
| QmfBufferReal, |
| QmfBufferImag, |
| synQmf->lsb, |
| synQmf->no_col ); |
| |
| C_AALLOC_SCRATCH_END(pWorkBuffer, FIXP_DBL, 2*(64)); |
| } |
| } |
| |
| sbrDecoder_drcUpdateChannel( &hSbrDec->sbrDrcChannel ); |
| |
| |
| /* |
| Update overlap buffer |
| Even bands above usb are copied to avoid outdated spectral data in case |
| the stop frequency raises. |
| */ |
| |
| if (hSbrDec->LppTrans.pSettings->overlap > 0) |
| { |
| if (! (flags & SBRDEC_LOW_POWER)) { |
| for ( i=0; i<hSbrDec->LppTrans.pSettings->overlap; i++ ) { |
| FDKmemcpy(QmfBufferReal[i], QmfBufferReal[i+noCols], (64)*sizeof(FIXP_DBL)); |
| FDKmemcpy(QmfBufferImag[i], QmfBufferImag[i+noCols], (64)*sizeof(FIXP_DBL)); |
| } |
| } else |
| for ( i=0; i<hSbrDec->LppTrans.pSettings->overlap; i++ ) { |
| FDKmemcpy(QmfBufferReal[i], QmfBufferReal[i+noCols], (64)*sizeof(FIXP_DBL)); |
| } |
| } |
| |
| hSbrDec->sbrScaleFactor.ov_lb_scale = saveLbScale; |
| |
| /* Save current frame status */ |
| hPrevFrameData->frameErrorFlag = hHeaderData->frameErrorFlag; |
| |
| } // sbr_dec() |
| |
| |
| /*! |
| \brief Creates sbr decoder structure |
| \return errorCode, 0 if successful |
| */ |
| SBR_ERROR |
| createSbrDec (SBR_CHANNEL * hSbrChannel, |
| HANDLE_SBR_HEADER_DATA hHeaderData, /*!< Static control data */ |
| TRANSPOSER_SETTINGS *pSettings, |
| const int downsampleFac, /*!< Downsampling factor */ |
| const UINT qmfFlags, /*!< flags -> 1: HQ/LP selector, 2: CLDFB */ |
| const UINT flags, |
| const int overlap, |
| int chan) /*!< Channel for which to assign buffers etc. */ |
| |
| { |
| SBR_ERROR err = SBRDEC_OK; |
| int timeSlots = hHeaderData->numberTimeSlots; /* Number of SBR slots per frame */ |
| int noCols = timeSlots * hHeaderData->timeStep; /* Number of QMF slots per frame */ |
| HANDLE_SBR_DEC hs = &(hSbrChannel->SbrDec); |
| |
| /* Initialize scale factors */ |
| hs->sbrScaleFactor.ov_lb_scale = 0; |
| hs->sbrScaleFactor.ov_hb_scale = 0; |
| hs->sbrScaleFactor.hb_scale = 0; |
| |
| |
| /* |
| create envelope calculator |
| */ |
| err = createSbrEnvelopeCalc (&hs->SbrCalculateEnvelope, |
| hHeaderData, |
| chan, |
| flags); |
| if (err != SBRDEC_OK) { |
| return err; |
| } |
| |
| /* |
| create QMF filter banks |
| */ |
| { |
| int qmfErr; |
| |
| qmfErr = qmfInitAnalysisFilterBank ( |
| &hs->AnalysiscQMF, |
| hs->anaQmfStates, |
| noCols, |
| hHeaderData->freqBandData.lowSubband, |
| hHeaderData->freqBandData.highSubband, |
| hHeaderData->numberOfAnalysisBands, |
| qmfFlags & (~QMF_FLAG_KEEP_STATES) |
| ); |
| if (qmfErr != 0) { |
| return SBRDEC_UNSUPPORTED_CONFIG; |
| } |
| } |
| if (hs->pSynQmfStates == NULL) { |
| hs->pSynQmfStates = GetRam_sbr_QmfStatesSynthesis(chan); |
| if (hs->pSynQmfStates == NULL) |
| return SBRDEC_MEM_ALLOC_FAILED; |
| } |
| |
| { |
| int qmfErr; |
| |
| qmfErr = qmfInitSynthesisFilterBank ( |
| &hs->SynthesisQMF, |
| hs->pSynQmfStates, |
| noCols, |
| hHeaderData->freqBandData.lowSubband, |
| hHeaderData->freqBandData.highSubband, |
| (64) / downsampleFac, |
| qmfFlags & (~QMF_FLAG_KEEP_STATES) |
| ); |
| |
| if (qmfErr != 0) { |
| return SBRDEC_UNSUPPORTED_CONFIG; |
| } |
| } |
| initSbrPrevFrameData (&hSbrChannel->prevFrameData, timeSlots); |
| |
| /* |
| create transposer |
| */ |
| err = createLppTransposer (&hs->LppTrans, |
| pSettings, |
| hHeaderData->freqBandData.lowSubband, |
| hHeaderData->freqBandData.v_k_master, |
| hHeaderData->freqBandData.numMaster, |
| hs->SynthesisQMF.usb, |
| timeSlots, |
| hs->AnalysiscQMF.no_col, |
| hHeaderData->freqBandData.freqBandTableNoise, |
| hHeaderData->freqBandData.nNfb, |
| hHeaderData->sbrProcSmplRate, |
| chan, |
| overlap ); |
| if (err != SBRDEC_OK) { |
| return err; |
| } |
| |
| /* The CLDFB does not have overlap */ |
| if ((qmfFlags & QMF_FLAG_CLDFB) == 0) { |
| if (hs->pSbrOverlapBuffer == NULL) { |
| hs->pSbrOverlapBuffer = GetRam_sbr_OverlapBuffer(chan); |
| if (hs->pSbrOverlapBuffer == NULL) { |
| return SBRDEC_MEM_ALLOC_FAILED; |
| } |
| } else { |
| /* Clear overlap buffer */ |
| FDKmemclear( hs->pSbrOverlapBuffer, |
| sizeof(FIXP_DBL) * 2 * (6) * (64) |
| ); |
| } |
| } |
| |
| /* assign qmf time slots */ |
| assignTimeSlots( &hSbrChannel->SbrDec, hHeaderData->numberTimeSlots * hHeaderData->timeStep, qmfFlags & QMF_FLAG_LP); |
| |
| return err; |
| } |
| |
| /*! |
| \brief Delete sbr decoder structure |
| \return errorCode, 0 if successful |
| */ |
| int |
| deleteSbrDec (SBR_CHANNEL * hSbrChannel) |
| { |
| HANDLE_SBR_DEC hs = &hSbrChannel->SbrDec; |
| |
| deleteSbrEnvelopeCalc (&hs->SbrCalculateEnvelope); |
| |
| /* delete QMF filter states */ |
| if (hs->pSynQmfStates != NULL) { |
| FreeRam_sbr_QmfStatesSynthesis(&hs->pSynQmfStates); |
| } |
| |
| |
| if (hs->pSbrOverlapBuffer != NULL) { |
| FreeRam_sbr_OverlapBuffer(&hs->pSbrOverlapBuffer); |
| } |
| |
| return 0; |
| } |
| |
| |
| /*! |
| \brief resets sbr decoder structure |
| \return errorCode, 0 if successful |
| */ |
| SBR_ERROR |
| resetSbrDec (HANDLE_SBR_DEC hSbrDec, |
| HANDLE_SBR_HEADER_DATA hHeaderData, |
| HANDLE_SBR_PREV_FRAME_DATA hPrevFrameData, |
| const int useLP, |
| const int downsampleFac |
| ) |
| { |
| SBR_ERROR sbrError = SBRDEC_OK; |
| |
| int old_lsb = hSbrDec->SynthesisQMF.lsb; |
| int new_lsb = hHeaderData->freqBandData.lowSubband; |
| int l, startBand, stopBand, startSlot, size; |
| |
| int source_scale, target_scale, delta_scale, target_lsb, target_usb, reserve; |
| FIXP_DBL maxVal; |
| |
| /* overlapBuffer point to first (6) slots */ |
| FIXP_DBL **OverlapBufferReal = hSbrDec->QmfBufferReal; |
| FIXP_DBL **OverlapBufferImag = hSbrDec->QmfBufferImag; |
| |
| /* assign qmf time slots */ |
| assignTimeSlots( hSbrDec, hHeaderData->numberTimeSlots * hHeaderData->timeStep, useLP); |
| |
| |
| |
| resetSbrEnvelopeCalc (&hSbrDec->SbrCalculateEnvelope); |
| |
| hSbrDec->SynthesisQMF.lsb = hHeaderData->freqBandData.lowSubband; |
| hSbrDec->SynthesisQMF.usb = fixMin((INT)hSbrDec->SynthesisQMF.no_channels, (INT)hHeaderData->freqBandData.highSubband); |
| |
| hSbrDec->AnalysiscQMF.lsb = hSbrDec->SynthesisQMF.lsb; |
| hSbrDec->AnalysiscQMF.usb = hSbrDec->SynthesisQMF.usb; |
| |
| |
| /* |
| The following initialization of spectral data in the overlap buffer |
| is required for dynamic x-over or a change of the start-freq for 2 reasons: |
| |
| 1. If the lowband gets _wider_, unadjusted data would remain |
| |
| 2. If the lowband becomes _smaller_, the highest bands of the old lowband |
| must be cleared because the whitening would be affected |
| */ |
| startBand = old_lsb; |
| stopBand = new_lsb; |
| startSlot = hHeaderData->timeStep * (hPrevFrameData->stopPos - hHeaderData->numberTimeSlots); |
| size = fixMax(0,stopBand-startBand); |
| |
| /* keep already adjusted data in the x-over-area */ |
| if (!useLP) { |
| for (l=startSlot; l<hSbrDec->LppTrans.pSettings->overlap; l++) { |
| FDKmemclear(&OverlapBufferReal[l][startBand], size*sizeof(FIXP_DBL)); |
| FDKmemclear(&OverlapBufferImag[l][startBand], size*sizeof(FIXP_DBL)); |
| } |
| } else |
| for (l=startSlot; l<hSbrDec->LppTrans.pSettings->overlap ; l++) { |
| FDKmemclear(&OverlapBufferReal[l][startBand], size*sizeof(FIXP_DBL)); |
| } |
| |
| |
| /* |
| reset LPC filter states |
| */ |
| startBand = fixMin(old_lsb,new_lsb); |
| stopBand = fixMax(old_lsb,new_lsb); |
| size = fixMax(0,stopBand-startBand); |
| |
| FDKmemclear(&hSbrDec->LppTrans.lpcFilterStatesReal[0][startBand], size*sizeof(FIXP_DBL)); |
| FDKmemclear(&hSbrDec->LppTrans.lpcFilterStatesReal[1][startBand], size*sizeof(FIXP_DBL)); |
| if (!useLP) { |
| FDKmemclear(&hSbrDec->LppTrans.lpcFilterStatesImag[0][startBand], size*sizeof(FIXP_DBL)); |
| FDKmemclear(&hSbrDec->LppTrans.lpcFilterStatesImag[1][startBand], size*sizeof(FIXP_DBL)); |
| } |
| |
| |
| /* |
| Rescale already processed spectral data between old and new x-over frequency. |
| This must be done because of the separate scalefactors for lowband and highband. |
| */ |
| startBand = fixMin(old_lsb,new_lsb); |
| stopBand = fixMax(old_lsb,new_lsb); |
| |
| if (new_lsb > old_lsb) { |
| /* The x-over-area was part of the highband before and will now belong to the lowband */ |
| source_scale = hSbrDec->sbrScaleFactor.ov_hb_scale; |
| target_scale = hSbrDec->sbrScaleFactor.ov_lb_scale; |
| target_lsb = 0; |
| target_usb = old_lsb; |
| } |
| else { |
| /* The x-over-area was part of the lowband before and will now belong to the highband */ |
| source_scale = hSbrDec->sbrScaleFactor.ov_lb_scale; |
| target_scale = hSbrDec->sbrScaleFactor.ov_hb_scale; |
| /* jdr: The values old_lsb and old_usb might be wrong because the previous frame might have been "upsamling". */ |
| target_lsb = hSbrDec->SynthesisQMF.lsb; |
| target_usb = hSbrDec->SynthesisQMF.usb; |
| } |
| |
| /* Shift left all samples of the x-over-area as much as possible |
| An unnecessary coarse scale could cause ov_lb_scale or ov_hb_scale to be |
| adapted and the accuracy in the next frame would seriously suffer! */ |
| |
| maxVal = maxSubbandSample( OverlapBufferReal, |
| (useLP) ? NULL : OverlapBufferImag, |
| startBand, |
| stopBand, |
| 0, |
| startSlot); |
| |
| reserve = CntLeadingZeros(maxVal)-1; |
| reserve = fixMin(reserve,DFRACT_BITS-1-source_scale); |
| |
| rescaleSubbandSamples( OverlapBufferReal, |
| (useLP) ? NULL : OverlapBufferImag, |
| startBand, |
| stopBand, |
| 0, |
| startSlot, |
| reserve); |
| source_scale += reserve; |
| |
| delta_scale = target_scale - source_scale; |
| |
| if (delta_scale > 0) { /* x-over-area is dominant */ |
| delta_scale = -delta_scale; |
| startBand = target_lsb; |
| stopBand = target_usb; |
| |
| if (new_lsb > old_lsb) { |
| /* The lowband has to be rescaled */ |
| hSbrDec->sbrScaleFactor.ov_lb_scale = source_scale; |
| } |
| else { |
| /* The highband has be be rescaled */ |
| hSbrDec->sbrScaleFactor.ov_hb_scale = source_scale; |
| } |
| } |
| |
| FDK_ASSERT(startBand <= stopBand); |
| |
| if (!useLP) { |
| for (l=0; l<startSlot; l++) { |
| scaleValues( OverlapBufferReal[l] + startBand, stopBand-startBand, delta_scale ); |
| scaleValues( OverlapBufferImag[l] + startBand, stopBand-startBand, delta_scale ); |
| } |
| } else |
| for (l=0; l<startSlot; l++) { |
| scaleValues( OverlapBufferReal[l] + startBand, stopBand-startBand, delta_scale ); |
| } |
| |
| |
| /* |
| Initialize transposer and limiter |
| */ |
| sbrError = resetLppTransposer (&hSbrDec->LppTrans, |
| hHeaderData->freqBandData.lowSubband, |
| hHeaderData->freqBandData.v_k_master, |
| hHeaderData->freqBandData.numMaster, |
| hHeaderData->freqBandData.freqBandTableNoise, |
| hHeaderData->freqBandData.nNfb, |
| hHeaderData->freqBandData.highSubband, |
| hHeaderData->sbrProcSmplRate); |
| if (sbrError != SBRDEC_OK) |
| return sbrError; |
| |
| sbrError = ResetLimiterBands ( hHeaderData->freqBandData.limiterBandTable, |
| &hHeaderData->freqBandData.noLimiterBands, |
| hHeaderData->freqBandData.freqBandTable[0], |
| hHeaderData->freqBandData.nSfb[0], |
| hSbrDec->LppTrans.pSettings->patchParam, |
| hSbrDec->LppTrans.pSettings->noOfPatches, |
| hHeaderData->bs_data.limiterBands); |
| |
| |
| return sbrError; |
| } |
