| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains the Bluetooth Manager (BTM) API function external |
| * definitions. |
| * |
| ******************************************************************************/ |
| #ifndef BTM_BLE_API_H |
| #define BTM_BLE_API_H |
| |
| #include "btm_api.h" |
| |
| #define CHNL_MAP_LEN 5 |
| typedef UINT8 tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN]; |
| |
| #define BTM_BLE_CONNECT_EVT 0x00 |
| #define BTM_BLE_CONNECT_DIR_EVT 0x01 |
| #define BTM_BLE_DISCOVER_EVT 0x02 |
| #define BTM_BLE_NON_CONNECT_EVT 0x03 |
| #define BTM_BLE_SCAN_RSP_EVT 0x04 |
| #define BTM_BLE_SCAN_REQ_EVT 0x06 |
| #define BTM_BLE_UNKNOWN_EVT 0xff |
| |
| #define BTM_BLE_UNKNOWN_EVT 0xff |
| |
| #define BTM_BLE_SCAN_MODE_PASS 0 |
| #define BTM_BLE_SCAN_MODE_ACTI 1 |
| #define BTM_BLE_SCAN_MODE_NONE 0xff |
| typedef UINT8 tBTM_BLE_SCAN_MODE; |
| |
| /* advertising channel map */ |
| #define BTM_BLE_ADV_CHNL_37 (0x01 << 0) |
| #define BTM_BLE_ADV_CHNL_38 (0x01 << 1) |
| #define BTM_BLE_ADV_CHNL_39 (0x01 << 2) |
| typedef UINT8 tBTM_BLE_ADV_CHNL_MAP; |
| |
| /*d efault advertising channel map */ |
| #ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP |
| #define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39) |
| #endif |
| |
| /* advertising filter policy */ |
| #define AP_SCAN_CONN_ALL 0x00 /* default */ |
| #define AP_SCAN_WL_CONN_ALL 0x01 |
| #define AP_SCAN_ALL_CONN_WL 0x02 |
| #define AP_SCAN_CONN_WL 0x03 |
| #define AP_SCAN_CONN_POLICY_MAX 0x04 |
| typedef UINT8 tBTM_BLE_AFP; |
| |
| /* default advertising filter policy */ |
| #ifndef BTM_BLE_DEFAULT_AFP |
| #define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL |
| #endif |
| |
| /* scanning filter policy */ |
| #define SP_ADV_ALL 0x00 /* accept adv pakt from all, directed adv pkt not directed to me is ignored */ |
| #define SP_ADV_WL 0x01 /* accept adv pakt from device in white list, directed adv pkt not directed to me is ignored */ |
| typedef UINT8 tBTM_BLE_SFP; |
| |
| #ifndef BTM_BLE_DEFAULT_SFP |
| #define BTM_BLE_DEFAULT_SFP SP_ADV_ALL |
| #endif |
| |
| /* adv parameter boundary values */ |
| #define BTM_BLE_ADV_INT_MIN 0x0020 |
| #define BTM_BLE_ADV_INT_MAX 0x4000 |
| |
| /* connection parameter boundary values */ |
| #define BTM_BLE_SCAN_INT_MIN 0x0004 |
| #define BTM_BLE_SCAN_INT_MAX 0x4000 |
| #define BTM_BLE_SCAN_WIN_MIN 0x0004 |
| #define BTM_BLE_SCAN_WIN_MAX 0x4000 |
| #define BTM_BLE_CONN_INT_MIN 0x0006 |
| #define BTM_BLE_CONN_INT_MAX 0x0C80 |
| #define BTM_BLE_CONN_LATENCY_MAX 500 |
| #define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A |
| #define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80 |
| #define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */ |
| #define BTM_BLE_CONN_SUP_TOUT_DEF 700 |
| |
| /* default connection parameters if not configured, use GAP recommend value for auto/selective connection */ |
| /* default scan interval */ |
| #ifndef BTM_BLE_SCAN_FAST_INT |
| #define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */ |
| #endif |
| /* default scan window for background connection, applicable for auto connection or selective conenction */ |
| #ifndef BTM_BLE_SCAN_FAST_WIN |
| #define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */ |
| #endif |
| |
| /* default scan paramter used in reduced power cycle (background scanning) */ |
| #ifndef BTM_BLE_SCAN_SLOW_INT_1 |
| #define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */ |
| #endif |
| #ifndef BTM_BLE_SCAN_SLOW_WIN_1 |
| #define BTM_BLE_SCAN_SLOW_WIN_1 18 /* 11.25 ms = 18 *0.625 */ |
| #endif |
| |
| /* default scan paramter used in reduced power cycle (background scanning) */ |
| #ifndef BTM_BLE_SCAN_SLOW_INT_2 |
| #define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */ |
| #endif |
| #ifndef BTM_BLE_SCAN_SLOW_WIN_2 |
| #define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */ |
| #endif |
| |
| /* default connection interval min */ |
| #ifndef BTM_BLE_CONN_INT_MIN_DEF |
| #define BTM_BLE_CONN_INT_MIN_DEF 24 /* recommended min: 30ms = 24 * 1.25 */ |
| #endif |
| /* default connectino interval max */ |
| #ifndef BTM_BLE_CONN_INT_MAX_DEF |
| #define BTM_BLE_CONN_INT_MAX_DEF 40 /* recommended max: 50 ms = 56 * 1.25 */ |
| #endif |
| /* default slave latency */ |
| #ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF |
| #define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */ |
| #endif |
| /* default supervision timeout */ |
| #ifndef BTM_BLE_CONN_TIMEOUT_DEF |
| #define BTM_BLE_CONN_TIMEOUT_DEF 2000 |
| #endif |
| |
| #define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1 |
| #define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2 |
| |
| #ifndef BTM_BLE_DIR_CONN_FALLBACK |
| #define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR |
| #endif |
| |
| #define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */ |
| #define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/ |
| typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */ |
| |
| #ifndef BTM_BLE_HOST_SUPPORT |
| #define BTM_BLE_HOST_SUPPORT 0x01 |
| #endif |
| |
| #ifndef BTM_BLE_SIMULTANEOUS_HOST |
| #define BTM_BLE_SIMULTANEOUS_HOST 0x01 |
| #endif |
| |
| /* Structure returned with Rand/Encrypt complete callback */ |
| typedef struct |
| { |
| UINT8 status; |
| UINT8 param_len; |
| UINT16 opcode; |
| UINT8 param_buf[BT_OCTET16_LEN]; |
| } tBTM_RAND_ENC; |
| |
| /* General callback function for notifying an application that a synchronous |
| ** BTM function is complete. The pointer contains the address of any returned data. |
| */ |
| typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1); |
| |
| #define BTM_BLE_FILTER_TARGET_SCANNER 0x01 |
| #define BTM_BLE_FILTER_TARGET_ADVR 0x00 |
| |
| #define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */ |
| #define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */ |
| #define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */ |
| #define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */ |
| |
| typedef struct |
| { |
| UINT8 adv_int_min; |
| UINT8 adv_int_max; |
| tBTM_BLE_CHNL_MAP chnl_map; |
| |
| }tBTM_BLE_ADV_PARAMS; |
| |
| /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ |
| #define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0) |
| #define BTM_BLE_GEN_DISC_FLAG (0x01 << 1) |
| #define BTM_BLE_BREDR_NOT_SPT (0x01 << 2) |
| #define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */ |
| #define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG) |
| #define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG ) |
| |
| #define BTM_BLE_AD_BIT_DEV_NAME (0x0001 << 0) |
| #define BTM_BLE_AD_BIT_FLAGS (0x0001 << 1) |
| #define BTM_BLE_AD_BIT_MANU (0x0001 << 2) |
| #define BTM_BLE_AD_BIT_TX_PWR (0x0001 << 3) |
| #define BTM_BLE_AD_BIT_INT_RANGE (0x0001 << 5) |
| #define BTM_BLE_AD_BIT_SERVICE (0x0001 << 6) |
| #define BTM_BLE_AD_BIT_SERVICE_SOL (0x0001 << 7) |
| #define BTM_BLE_AD_BIT_SERVICE_DATA (0x0001 << 8) |
| #define BTM_BLE_AD_BIT_SIGN_DATA (0x0001 << 9) |
| #define BTM_BLE_AD_BIT_SERVICE_128SOL (0x0001 << 10) |
| #define BTM_BLE_AD_BIT_APPEARANCE (0x0001 << 11) |
| #define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x0001 << 12) |
| #define BTM_BLE_AD_BIT_RANDOM_ADDR (0x0001 << 13) |
| |
| #define BTM_BLE_AD_BIT_PROPRIETARY (0x0001 << 15) |
| |
| typedef UINT16 tBTM_BLE_AD_MASK; |
| |
| #define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */ |
| #define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ |
| #define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ |
| #define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ |
| #define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ |
| #define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ |
| #define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ |
| #define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ |
| #define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ |
| #define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ |
| #define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D |
| #define BTM_BLE_AD_TYPE_SM_TK 0x10 |
| #define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11 |
| #define BTM_BLE_AD_TYPE_INT_RANGE 0x12 |
| #define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14 |
| #define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15 |
| #define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16 |
| #define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17 |
| #define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18 |
| #define BTM_BLE_AD_TYPE_APPEARANCE 0x19 |
| #define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */ |
| typedef UINT8 tBTM_BLE_AD_TYPE; |
| |
| /* slave preferred connection interval range */ |
| typedef struct |
| { |
| UINT16 low; |
| UINT16 hi; |
| |
| }tBTM_BLE_INT_RANGE; |
| |
| /* Service tag supported in the device */ |
| typedef struct |
| { |
| UINT8 num_service; |
| BOOLEAN list_cmpl; |
| UINT16 *p_uuid; |
| }tBTM_BLE_SERVICE; |
| |
| typedef struct |
| { |
| UINT8 len; |
| UINT8 *p_val; |
| }tBTM_BLE_MANU; |
| |
| typedef struct |
| { |
| UINT8 adv_type; |
| UINT8 len; |
| UINT8 *p_val; /* number of len byte */ |
| }tBTM_BLE_PROP_ELEM; |
| |
| typedef struct |
| { |
| UINT8 num_elem; |
| tBTM_BLE_PROP_ELEM *p_elem; |
| }tBTM_BLE_PROPRIETARY; |
| |
| typedef struct |
| { |
| tBTM_BLE_MANU manu; /* manufactuer data */ |
| tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ |
| tBTM_BLE_SERVICE services; /* services */ |
| UINT8 flag; |
| UINT16 appearance; |
| tBTM_BLE_PROPRIETARY *p_proprietary; |
| }tBTM_BLE_ADV_DATA; |
| |
| /* These are the fields returned in each device adv packet. It |
| ** is returned in the results callback if registered. |
| */ |
| typedef struct |
| { |
| UINT8 conn_mode; |
| tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ |
| UINT8 flag; |
| UINT8 tx_power_level; |
| UINT8 remote_name_len; |
| UINT8 *p_remote_name; |
| tBTM_BLE_SERVICE service; |
| } tBTM_BLE_INQ_DATA; |
| |
| enum |
| { |
| BTM_BLE_CONN_NONE, |
| BTM_BLE_CONN_AUTO, |
| BTM_BLE_CONN_SELECTIVE |
| }; |
| typedef UINT8 tBTM_BLE_CONN_TYPE; |
| |
| typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); |
| |
| /* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */ |
| typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data); |
| typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match); |
| /* random address set complete callback */ |
| typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda); |
| |
| typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt); |
| |
| /***************************************************************************** |
| ** EXTERNAL FUNCTION DECLARATIONS |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecAddBleDevice |
| ** |
| ** Description Add/modify device. This function will be normally called |
| ** during host startup to restore all required information |
| ** for a LE device stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** bd_name - Name of the peer device. NULL if unknown. |
| ** dev_type - Remote device's device type. |
| ** addr_type - LE device address type. |
| ** |
| ** Returns TRUE if added OK, else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, |
| tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecAddBleKey |
| ** |
| ** Description Add/modify LE device information. This function will be |
| ** normally called during host startup to restore all required |
| ** information stored in the NVRAM. |
| ** |
| ** Parameters: bd_addr - BD address of the peer |
| ** p_le_key - LE key values. |
| ** key_type - LE SMP key type. |
| * |
| ** Returns TRUE if added OK, else FALSE |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, |
| tBTM_LE_KEY_TYPE key_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteAdvData |
| ** |
| ** Description This function is called to write advertising data. |
| ** |
| ** Parameters: None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, |
| tBTM_BLE_ADV_DATA *p_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetAdvParams |
| ** |
| ** Description This function is called to set advertising parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** chnl_map: advertising channel map. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max, |
| tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetScanParams |
| ** |
| ** Description This function is called to set Scan parameters. |
| ** |
| ** Parameters adv_int_min: minimum advertising interval |
| ** adv_int_max: maximum advertising interval |
| ** scan_type: scan mode. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window, |
| tBTM_BLE_SCAN_MODE scan_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleWriteScanRsp |
| ** |
| ** Description This function is called to write LE scan response. |
| ** |
| ** Parameters: p_scan_rsp: scan response. |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, |
| tBTM_BLE_ADV_DATA *p_data); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReset |
| ** |
| ** Description This function is called to reset ULP controller. |
| ** |
| ** Parameters None. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleReset(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleObserve |
| ** |
| ** Description This procedure keep the device listening for advertising |
| ** events from a broadcast device. |
| ** |
| ** Parameters start: start or stop observe. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration, |
| tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceIDRoot |
| ** |
| ** Description This function is called to read the local device identity |
| ** root. |
| ** |
| ** Returns void |
| ** the local device ER is copied into er |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceEncRoot |
| ** |
| ** Description This function is called to read the local device encryption |
| ** root. |
| ** |
| ** Returns void |
| ** the local device ER is copied into er |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceEncRoot (BT_OCTET16 er); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_GetDeviceDHK |
| ** |
| ** Description This function is called to read the local device DHK. |
| ** |
| ** Returns void |
| ** the local device DHK is copied into dhk |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_GetDeviceDHK (BT_OCTET16 dhk); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_SecurityGrant |
| ** |
| ** Description This function is called to grant security process. |
| ** |
| ** Parameters bd_addr - peer device bd address. |
| ** res - result of the operation BTM_SUCCESS if success. |
| ** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts. |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BlePasskeyReply |
| ** |
| ** Description This function is called after Security Manager submitted |
| ** passkey request to the application. |
| ** |
| ** Parameters: bd_addr - Address of the device for which passkey was requested |
| ** res - result of the operation SMP_SUCCESS if success |
| ** passkey - numeric value in the range of |
| ** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)). |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_LeOobDataReply |
| ** |
| ** Description This function is called to provide the OOB data for |
| ** SMP in response to BTM_LE_OOB_REQ_EVT |
| ** |
| ** Parameters: bd_addr - Address of the peer device |
| ** res - result of the operation SMP_SUCCESS if success |
| ** p_data - simple pairing Randomizer C. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleDataSignature |
| ** |
| ** Description This function is called to sign the data using AES128 CMAC |
| ** algorith. |
| ** |
| ** Parameter bd_addr: target device the data to be signed for. |
| ** p_text: singing data |
| ** len: length of the signing data |
| ** signature: output parameter where data signature is going to |
| ** be stored. |
| ** |
| ** Returns TRUE if signing sucessul, otherwise FALSE. |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len, |
| BLE_SIGNATURE signature); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleVerifySignature |
| ** |
| ** Description This function is called to verify the data signature |
| ** |
| ** Parameter bd_addr: target device the data to be signed for. |
| ** p_orig: original data before signature. |
| ** len: length of the signing data |
| ** counter: counter used when doing data signing |
| ** p_comp: signature to be compared against. |
| |
| ** Returns TRUE if signature verified correctly; otherwise FALSE. |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, |
| UINT16 len, UINT32 counter, |
| UINT8 *p_comp); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadConnectionAddr |
| ** |
| ** Description This function is called to set the local device random address |
| ** . |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadRemoteConnectionAddr |
| ** |
| ** Description This function is read the remote device address currently used |
| ** . |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, |
| BD_ADDR conn_addr, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleLoadLocalKeys |
| ** |
| ** Description Local local identity key, encryption root or sign counter. |
| ** |
| ** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER |
| ** or BTM_BLE_KEY_TYPE_COUNTER. |
| ** p_key: pointer to the key. |
| * |
| ** Returns non2. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetBgConnType |
| ** |
| ** Description This function is called to set BLE background connection |
| ** procedure type. It can be auto connection, or selective connection. |
| ** |
| ** Parameters conn_type: it can be auto connection, or selective connection. |
| ** p_select_cback: callback function when selective connection procedure |
| ** is being used. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type, |
| tBTM_BLE_SEL_CBACK *p_select_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateBgConnDev |
| ** |
| ** Description This function is called to add or remove a device into/from |
| ** background connection procedure. The background connection |
| * procedure is decided by the background connection type, it can be |
| * auto connection, or selective connection. |
| ** |
| ** Parameters add_remove: TRUE to add; FALSE to remove. |
| ** remote_bda: device address to add/remove. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda); |
| |
| |
| /******************************************************** |
| ** |
| ** Function BTM_BleSetPrefConnParams |
| ** |
| ** Description Set a peripheral's preferred connection parameters. When |
| ** any of the value does not want to be updated while others |
| ** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to |
| ** leave untouched. |
| ** |
| ** Parameters: bd_addr - BD address of the peripheral |
| ** min_conn_int - minimum preferred connection interval |
| ** max_conn_int - maximum preferred connection interval |
| ** slave_latency - preferred slave latency |
| ** supervision_tout - preferred supervision timeout |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetPrefConnParams (BD_ADDR bd_addr, |
| UINT16 min_conn_int, UINT16 max_conn_int, |
| UINT16 slave_latency, UINT16 supervision_tout); |
| |
| /****************************************************************************** |
| ** |
| ** Function BTM_BleSetConnScanParams |
| ** |
| ** Description Set scan parameters used in BLE connection request |
| ** |
| ** Parameters: scan_interval - scan interval |
| ** scan_window - scan window |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_CheckAdvData |
| ** |
| ** Description This function is called to get ADV data for a specific type. |
| ** |
| ** Parameters p_adv - pointer of ADV data |
| ** type - finding ADV data type |
| ** p_length - return the length of ADV data not including type |
| ** |
| ** Returns pointer of ADV data |
| ** |
| *******************************************************************************/ |
| BTM_API extern UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_ReadDevInfo |
| ** |
| ** Description This function is called to read the device/address type |
| ** of BD address. |
| ** |
| ** Parameter remote_bda: remote device address |
| ** p_dev_type: output parameter to read the device type. |
| ** p_addr_type: output parameter to read the address type. |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, |
| tBLE_ADDR_TYPE *p_addr_type); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleBroadcast |
| ** |
| ** Description This function is to start or stop broadcasting. |
| ** |
| ** Parameters start: start or stop broadcasting. |
| ** |
| ** Returns status. |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_RegisterScanReqEvt |
| ** |
| ** Description This function is called to register a scan request callback |
| ** on the advertiser. |
| ** |
| ** Parameters p_scan_req_cback: scan request callback. If NULL, remove the |
| ** registration. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleConfigPrivacy |
| ** |
| ** Description This function is called to enable or disable the privacy in |
| ** the local device. |
| ** |
| ** Parameters enable: TRUE to enable it; FALSE to disable it. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleConfigPrivacy(BOOLEAN enable); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetConnMode |
| ** |
| ** Description This function is called to set BLE connectable mode for a |
| ** peripheral device. |
| ** |
| ** Parameters directed: is directed connectable mode, or non-directed. |
| ** p_dir_bda: connectable direct initiator's LE device address |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern tBTM_STATUS BTM_BleSetConnMode(BOOLEAN directed); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTurnOnPrivacyOnRemote |
| ** |
| ** Description This function is called to enable or disable the privacy on the |
| ** remote device. |
| ** |
| ** Parameters bd_addr: remote device address. |
| ** privacy_on: TRUE to enable it; FALSE to disable it. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr, |
| BOOLEAN privacy_on); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvWhitelist |
| ** |
| ** Description Add or remove device from advertising white list |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| BTM_API extern BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleUpdateAdvFilterPolicy |
| ** |
| ** Description This function update the filter policy of advertiser. |
| ** |
| ** Parameter adv_policy: advertising filter policy |
| ** |
| ** Return void |
| *******************************************************************************/ |
| BTM_API extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReceiverTest |
| ** |
| ** Description This function is called to start the LE Receiver test |
| ** |
| ** Parameter rx_freq - Frequency Range |
| ** p_cmd_cmpl_cback - Command Complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTransmitterTest |
| ** |
| ** Description This function is called to start the LE Transmitter test |
| ** |
| ** Parameter tx_freq - Frequency Range |
| ** test_data_len - Length in bytes of payload data in each packet |
| ** packet_payload - Pattern to use in the payload |
| ** p_cmd_cmpl_cback - Command Complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len, |
| UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTestEnd |
| ** |
| ** Description This function is called to stop the in-progress TX or RX test |
| ** |
| ** Parameter p_cmd_cmpl_cback - Command complete callback |
| ** |
| *******************************************************************************/ |
| void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback); |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
