| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /************************************************************************************ |
| * |
| * Filename: btif_storage.c |
| * |
| * Description: Stores the local BT adapter and remote device properties in |
| * NVRAM storage, typically as xml file in the |
| * mobile's filesystem |
| * |
| * |
| */ |
| #include <stdlib.h> |
| #include <time.h> |
| #include <string.h> |
| #include <ctype.h> |
| #include <alloca.h> |
| |
| |
| #include <hardware/bluetooth.h> |
| #include "btif_config.h" |
| #define LOG_TAG "BTIF_STORAGE" |
| |
| #include "btif_api.h" |
| |
| #include "btif_util.h" |
| #include "bd.h" |
| #include "gki.h" |
| #include "bta_hh_api.h" |
| #include "btif_hh.h" |
| |
| #include <cutils/log.h> |
| |
| /************************************************************************************ |
| ** Constants & Macros |
| ************************************************************************************/ |
| |
| #define BTIF_STORAGE_PATH_BLUEDROID "/data/misc/bluedroid" |
| |
| //#define BTIF_STORAGE_PATH_ADAPTER_INFO "adapter_info" |
| //#define BTIF_STORAGE_PATH_REMOTE_DEVICES "remote_devices" |
| #define BTIF_STORAGE_PATH_REMOTE_DEVTIME "Timestamp" |
| #define BTIF_STORAGE_PATH_REMOTE_DEVCLASS "DevClass" |
| #define BTIF_STORAGE_PATH_REMOTE_DEVTYPE "DevType" |
| #define BTIF_STORAGE_PATH_REMOTE_NAME "Name" |
| //#define BTIF_STORAGE_PATH_REMOTE_LINKKEYS "remote_linkkeys" |
| #define BTIF_STORAGE_PATH_REMOTE_ALIASE "Aliase" |
| #define BTIF_STORAGE_PATH_REMOTE_SERVICE "Service" |
| #define BTIF_STORAGE_PATH_REMOTE_HIDINFO "HidInfo" |
| #define BTIF_STORAGE_KEY_ADAPTER_NAME "Name" |
| #define BTIF_STORAGE_KEY_ADAPTER_SCANMODE "ScanMode" |
| #define BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT "DiscoveryTimeout" |
| |
| |
| #define BTIF_AUTO_PAIR_CONF_FILE "/etc/bluetooth/auto_pair_devlist.conf" |
| #define BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST "AutoPairBlacklist" |
| #define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR "AddressBlacklist" |
| #define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME "ExactNameBlacklist" |
| #define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME "PartialNameBlacklist" |
| #define BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST "FixedPinZerosKeyboardBlacklist" |
| #define BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR "DynamicAddressBlacklist" |
| |
| #define BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR "," |
| #define BTIF_AUTO_PAIR_CONF_SPACE ' ' |
| #define BTIF_AUTO_PAIR_CONF_COMMENT '#' |
| #define BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER "=" |
| |
| |
| /* This is a local property to add a device found */ |
| #define BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP 0xFF |
| |
| #define BTIF_STORAGE_GET_ADAPTER_PROP(t,v,l,p) \ |
| {p.type=t;p.val=v;p.len=l; btif_storage_get_adapter_property(&p);} |
| |
| #define BTIF_STORAGE_GET_REMOTE_PROP(b,t,v,l,p) \ |
| {p.type=t;p.val=v;p.len=l;btif_storage_get_remote_device_property(b,&p);} |
| |
| #define STORAGE_BDADDR_STRING_SZ (18) /* 00:11:22:33:44:55 */ |
| #define STORAGE_UUID_STRING_SIZE (36+1) /* 00001200-0000-1000-8000-00805f9b34fb; */ |
| #define STORAGE_PINLEN_STRING_MAX_SIZE (2) /* ascii pinlen max chars */ |
| #define STORAGE_KEYTYPE_STRING_MAX_SIZE (1) /* ascii keytype max chars */ |
| |
| #define STORAGE_KEY_TYPE_MAX (10) |
| |
| #define STORAGE_HID_ATRR_MASK_SIZE (4) |
| #define STORAGE_HID_SUB_CLASS_SIZE (2) |
| #define STORAGE_HID_APP_ID_SIZE (2) |
| #define STORAGE_HID_VENDOR_ID_SIZE (4) |
| #define STORAGE_HID_PRODUCT_ID_SIZE (4) |
| #define STORAGE_HID_VERSION_SIZE (4) |
| #define STORAGE_HID_CTRY_CODE_SIZE (2) |
| #define STORAGE_HID_DESC_LEN_SIZE (4) |
| #define STORAGE_HID_DESC_MAX_SIZE (2*512) |
| |
| /* <18 char bd addr> <space> LIST< <36 char uuid> <;> > <keytype (dec)> <pinlen> */ |
| #define BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX (STORAGE_BDADDR_STRING_SZ + 1 +\ |
| STORAGE_UUID_STRING_SIZE*BT_MAX_NUM_UUIDS + \ |
| STORAGE_PINLEN_STRING_MAX_SIZE +\ |
| STORAGE_KEYTYPE_STRING_MAX_SIZE) |
| |
| #define STORAGE_REMOTE_LINKKEYS_ENTRY_SIZE (LINK_KEY_LEN*2 + 1 + 2 + 1 + 2) |
| |
| /* <18 char bd addr> <space>LIST <attr_mask> <space> > <sub_class> <space> <app_id> <space> |
| <vendor_id> <space> > <product_id> <space> <version> <space> |
| <ctry_code> <space> > <desc_len> <space> <desc_list> <space> */ |
| #define BTIF_HID_INFO_ENTRY_SIZE_MAX (STORAGE_BDADDR_STRING_SZ + 1 +\ |
| STORAGE_HID_ATRR_MASK_SIZE + 1 +\ |
| STORAGE_HID_SUB_CLASS_SIZE + 1 +\ |
| STORAGE_HID_APP_ID_SIZE+ 1 +\ |
| STORAGE_HID_VENDOR_ID_SIZE+ 1 +\ |
| STORAGE_HID_PRODUCT_ID_SIZE+ 1 +\ |
| STORAGE_HID_VERSION_SIZE+ 1 +\ |
| STORAGE_HID_CTRY_CODE_SIZE+ 1 +\ |
| STORAGE_HID_DESC_LEN_SIZE+ 1 +\ |
| STORAGE_HID_DESC_MAX_SIZE+ 1 ) |
| |
| |
| /* currently remote services is the potentially largest entry */ |
| #define BTIF_STORAGE_MAX_LINE_SZ BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX |
| |
| |
| /* check against unv max entry size at compile time */ |
| #if (BTIF_STORAGE_ENTRY_MAX_SIZE > UNV_MAXLINE_LENGTH) |
| #error "btif storage entry size exceeds unv max line size" |
| #endif |
| |
| |
| #define BTIF_STORAGE_HL_APP "hl_app" |
| #define BTIF_STORAGE_HL_APP_CB "hl_app_cb" |
| #define BTIF_STORAGE_HL_APP_DATA "hl_app_data_" |
| #define BTIF_STORAGE_HL_APP_MDL_DATA "hl_app_mdl_data_" |
| /************************************************************************************ |
| ** Local type definitions |
| ************************************************************************************/ |
| typedef struct |
| { |
| uint32_t num_devices; |
| bt_bdaddr_t devices[BTM_SEC_MAX_DEVICE_RECORDS]; |
| } btif_bonded_devices_t; |
| |
| /************************************************************************************ |
| ** Extern variables |
| ************************************************************************************/ |
| extern UINT16 bta_service_id_to_uuid_lkup_tbl [BTA_MAX_SERVICE_ID]; |
| extern bt_bdaddr_t btif_local_bd_addr; |
| /************************************************************************************ |
| ** Static variables |
| ************************************************************************************/ |
| |
| /************************************************************************************ |
| ** Static functions |
| ************************************************************************************/ |
| /******************************************************************************* |
| ** |
| ** Function btif_in_make_filename |
| ** |
| ** Description Internal helper function to create NVRAM file path |
| ** from address and filename |
| ** |
| ** Returns NVRAM file path if successfull, NULL otherwise |
| ** |
| *******************************************************************************/ |
| static char* btif_in_make_filename(bt_bdaddr_t *bd_addr, char *fname) |
| { |
| static char path[256]; |
| bdstr_t bdstr; |
| |
| if (fname == NULL)return NULL; |
| if (bd_addr) |
| { |
| sprintf(path, "%s/%s/%s", BTIF_STORAGE_PATH_BLUEDROID, |
| bd2str(bd_addr, &bdstr), fname); |
| } |
| else |
| { |
| /* local adapter */ |
| sprintf(path, "%s/LOCAL/%s", BTIF_STORAGE_PATH_BLUEDROID, fname); |
| } |
| |
| return(char*)path; |
| } |
| /******************************************************************************* |
| ** |
| ** Function btif_in_split_uuids_string_to_list |
| ** |
| ** Description Internal helper function to split the string of UUIDs |
| ** read from the NVRAM to an array |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| static void btif_in_split_uuids_string_to_list(char *str, bt_uuid_t *p_uuid, |
| uint32_t *p_num_uuid) |
| { |
| char buf[64]; |
| char *p_start = str; |
| char *p_needle; |
| uint32_t num = 0; |
| do |
| { |
| //p_needle = strchr(p_start, ';'); |
| p_needle = strchr(p_start, ' '); |
| if (p_needle < p_start) break; |
| memset(buf, 0, sizeof(buf)); |
| strncpy(buf, p_start, (p_needle-p_start)); |
| string_to_uuid(buf, p_uuid + num); |
| num++; |
| p_start = ++p_needle; |
| |
| } while (*p_start != 0); |
| *p_num_uuid = num; |
| } |
| static int prop2cfg(bt_bdaddr_t *remote_bd_addr, bt_property_t *prop) |
| { |
| bdstr_t bdstr = {0}; |
| if(remote_bd_addr) |
| bd2str(remote_bd_addr, &bdstr); |
| BTIF_TRACE_DEBUG3("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type, prop->len); |
| char value[1024]; |
| if(prop->len <= 0 || prop->len > (int)sizeof(value) - 1) |
| { |
| BTIF_TRACE_ERROR2("property type:%d, len:%d is invalid", prop->type, prop->len); |
| return FALSE; |
| } |
| switch(prop->type) |
| { |
| case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP: |
| btif_config_set_int("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_DEVTIME, (int)time(NULL)); |
| break; |
| case BT_PROPERTY_BDNAME: |
| strncpy(value, (char*)prop->val, prop->len); |
| value[prop->len]='\0'; |
| if(remote_bd_addr) |
| btif_config_set_str("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_NAME, value); |
| else btif_config_set_str("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_NAME, value); |
| break; |
| case BT_PROPERTY_REMOTE_FRIENDLY_NAME: |
| strncpy(value, (char*)prop->val, prop->len); |
| value[prop->len]='\0'; |
| btif_config_set_str("Remote", bdstr, BTIF_STORAGE_PATH_REMOTE_ALIASE, value); |
| break; |
| case BT_PROPERTY_ADAPTER_SCAN_MODE: |
| btif_config_set_int("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_SCANMODE, *(int*)prop->val); |
| break; |
| case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: |
| btif_config_set_int("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT, *(int*)prop->val); |
| break; |
| case BT_PROPERTY_CLASS_OF_DEVICE: |
| btif_config_set_int("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_DEVCLASS, *(int*)prop->val); |
| break; |
| case BT_PROPERTY_TYPE_OF_DEVICE: |
| btif_config_set_int("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_DEVTYPE, *(int*)prop->val); |
| break; |
| case BT_PROPERTY_UUIDS: |
| { |
| uint32_t i; |
| char buf[64]; |
| value[0] = 0; |
| for (i=0; i < (prop->len)/sizeof(bt_uuid_t); i++) |
| { |
| bt_uuid_t *p_uuid = (bt_uuid_t*)prop->val + i; |
| memset(buf, 0, sizeof(buf)); |
| uuid_to_string(p_uuid, buf); |
| strcat(value, buf); |
| //strcat(value, ";"); |
| strcat(value, " "); |
| } |
| btif_config_set_str("Remote", bdstr, BTIF_STORAGE_PATH_REMOTE_SERVICE, value); |
| btif_config_save(); |
| break; |
| } |
| default: |
| BTIF_TRACE_ERROR1("Unknow prop type:%d", prop->type); |
| return FALSE; |
| } |
| return TRUE; |
| } |
| static int cfg2prop(bt_bdaddr_t *remote_bd_addr, bt_property_t *prop) |
| { |
| bdstr_t bdstr = {0}; |
| if(remote_bd_addr) |
| bd2str(remote_bd_addr, &bdstr); |
| BTIF_TRACE_DEBUG3("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type, prop->len); |
| if(prop->len <= 0) |
| { |
| BTIF_TRACE_ERROR2("property type:%d, len:%d is invalid", prop->type, prop->len); |
| return FALSE; |
| } |
| int ret = FALSE; |
| switch(prop->type) |
| { |
| case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP: |
| if(prop->len >= (int)sizeof(int)) |
| ret = btif_config_get_int("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_DEVTIME, (int*)prop->val); |
| break; |
| case BT_PROPERTY_BDNAME: |
| { |
| int len = prop->len; |
| if(remote_bd_addr) |
| ret = btif_config_get_str("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_NAME, (char*)prop->val, &len); |
| else ret = btif_config_get_str("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_NAME, (char*)prop->val, &len); |
| if(ret && len && len <= prop->len) |
| prop->len = len - 1; |
| else |
| { |
| prop->len = 0; |
| ret = FALSE; |
| } |
| break; |
| } |
| case BT_PROPERTY_REMOTE_FRIENDLY_NAME: |
| { |
| int len = prop->len; |
| ret = btif_config_get_str("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_ALIASE, (char*)prop->val, &len); |
| if(ret && len && len <= prop->len) |
| prop->len = len - 1; |
| else |
| { |
| prop->len = 0; |
| ret = FALSE; |
| } |
| break; |
| } |
| case BT_PROPERTY_ADAPTER_SCAN_MODE: |
| if(prop->len >= (int)sizeof(int)) |
| ret = btif_config_get_int("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_SCANMODE, (int*)prop->val); |
| break; |
| case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT: |
| if(prop->len >= (int)sizeof(int)) |
| ret = btif_config_get_int("Local", "Adapter", |
| BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT, (int*)prop->val); |
| break; |
| case BT_PROPERTY_CLASS_OF_DEVICE: |
| if(prop->len >= (int)sizeof(int)) |
| ret = btif_config_get_int("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_DEVCLASS, (int*)prop->val); |
| break; |
| case BT_PROPERTY_TYPE_OF_DEVICE: |
| if(prop->len >= (int)sizeof(int)) |
| ret = btif_config_get_int("Remote", |
| bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTYPE, (int*)prop->val); |
| break; |
| case BT_PROPERTY_UUIDS: |
| { |
| char value[1280]; |
| int size = sizeof(value); |
| if(btif_config_get_str("Remote", bdstr, |
| BTIF_STORAGE_PATH_REMOTE_SERVICE, value, &size)) |
| { |
| bt_uuid_t *p_uuid = (bt_uuid_t*)prop->val; |
| uint32_t num_uuids = 0; |
| btif_in_split_uuids_string_to_list(value, p_uuid, &num_uuids); |
| prop->len = num_uuids * sizeof(bt_uuid_t); |
| ret = TRUE; |
| } |
| break; |
| } |
| default: |
| BTIF_TRACE_ERROR1("Unknow prop type:%d", prop->type); |
| return FALSE; |
| } |
| return ret; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_in_fetch_bonded_devices |
| ** |
| ** Description Internal helper function to fetch the bonded devices |
| ** from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| static bt_status_t btif_in_fetch_bonded_devices(btif_bonded_devices_t *p_bonded_devices, int add) |
| { |
| BTIF_TRACE_DEBUG1("in add:%d", add); |
| memset(p_bonded_devices, 0, sizeof(btif_bonded_devices_t)); |
| |
| char kname[128], vname[128]; |
| short kpos; |
| int kname_size; |
| kname_size = sizeof(kname); |
| kname[0] = 0; |
| kpos = 0; |
| do |
| { |
| kpos = btif_config_next_key(kpos, "Remote", kname, &kname_size); |
| BTIF_TRACE_DEBUG2("Remote device:%s, size:%d", kname, kname_size); |
| int type = BTIF_CFG_TYPE_BIN; |
| LINK_KEY link_key; |
| int size = sizeof(link_key); |
| if(btif_config_get("Remote", kname, "LinkKey", (char*)link_key, &size, &type)) |
| { |
| int linkkey_type; |
| if(btif_config_get_int("Remote", kname, "LinkKeyType", &linkkey_type)) |
| { |
| //int pin_len; |
| //btif_config_get_int("Remote", kname, "PinLength", &pin_len)) |
| bt_bdaddr_t bd_addr; |
| str2bd(kname, &bd_addr); |
| if(add) |
| { |
| DEV_CLASS dev_class = {0, 0, 0}; |
| int cod; |
| if(btif_config_get_int("Remote", kname, "DevClass", &cod)) |
| uint2devclass((UINT32)cod, dev_class); |
| BTA_DmAddDevice(bd_addr.address, dev_class, link_key, 0, 0, (UINT8)linkkey_type, 0); |
| } |
| memcpy(&p_bonded_devices->devices[p_bonded_devices->num_devices++], &bd_addr, sizeof(bt_bdaddr_t)); |
| } |
| else BTIF_TRACE_ERROR1("bounded device:%s, LinkKeyType or PinLength is invalid", kname); |
| } |
| else BTIF_TRACE_DEBUG1("Remote device:%s, no link key", kname); |
| kname_size = sizeof(kname); |
| kname[0] = 0; |
| } while(kpos != -1); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| static int hex_str_to_int(const char* str, int size) |
| { |
| int n = 0; |
| char c = *str++; |
| while (size-- != 0) |
| { |
| n <<= 4; |
| if (c >= '0' && c <= '9') { |
| n |= c - '0'; |
| } |
| else if (c >= 'a' && c <= 'z') { |
| n |= c - 'a' + 10; |
| } |
| else // (c >= 'A' && c <= 'Z') |
| { |
| n |= c - 'A' + 10; |
| } |
| |
| c = *str++; |
| } |
| return n; |
| } |
| |
| /************************************************************************************ |
| ** Externs |
| ************************************************************************************/ |
| |
| /************************************************************************************ |
| ** Functions |
| ************************************************************************************/ |
| |
| /** functions are synchronous. |
| * functions can be called by both internal modules such as BTIF_DM and by external entiries from HAL via BTIF_context_switch |
| * For OUT parameters, caller is expected to provide the memory. |
| * Caller is expected to provide a valid pointer to 'property->value' based on the property->type |
| */ |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_get_adapter_property |
| ** |
| ** Description BTIF storage API - Fetches the adapter property->type |
| ** from NVRAM and fills property->val. |
| ** Caller should provide memory for property->val and |
| ** set the property->val |
| ** |
| ** Returns BT_STATUS_SUCCESS if the fetch was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_get_adapter_property(bt_property_t *property) |
| { |
| |
| /* Special handling for adapter BD_ADDR and BONDED_DEVICES */ |
| if (property->type == BT_PROPERTY_BDADDR) |
| { |
| BD_ADDR addr; |
| bt_bdaddr_t *bd_addr = (bt_bdaddr_t*)property->val; |
| /* This has been cached in btif. Just fetch it from there */ |
| memcpy(bd_addr, &btif_local_bd_addr, sizeof(bt_bdaddr_t)); |
| property->len = sizeof(bt_bdaddr_t); |
| return BT_STATUS_SUCCESS; |
| } |
| else if (property->type == BT_PROPERTY_ADAPTER_BONDED_DEVICES) |
| { |
| btif_bonded_devices_t bonded_devices; |
| |
| btif_in_fetch_bonded_devices(&bonded_devices, 0); |
| |
| BTIF_TRACE_DEBUG2("%s: Number of bonded devices: %d Property:BT_PROPERTY_ADAPTER_BONDED_DEVICES", __FUNCTION__, bonded_devices.num_devices); |
| |
| if (bonded_devices.num_devices > 0) |
| { |
| property->len = bonded_devices.num_devices * sizeof(bt_bdaddr_t); |
| memcpy(property->val, bonded_devices.devices, property->len); |
| } |
| |
| /* if there are no bonded_devices, then length shall be 0 */ |
| return BT_STATUS_SUCCESS; |
| } |
| else if (property->type == BT_PROPERTY_UUIDS) |
| { |
| /* publish list of local supported services */ |
| bt_uuid_t *p_uuid = (bt_uuid_t*)property->val; |
| uint32_t num_uuids = 0; |
| uint32_t i; |
| |
| tBTA_SERVICE_MASK service_mask = btif_get_enabled_services_mask(); |
| BTIF_TRACE_ERROR2("%s service_mask:0x%x", __FUNCTION__, service_mask); |
| for (i=0; i < BTA_MAX_SERVICE_ID; i++) |
| { |
| /* This should eventually become a function when more services are enabled */ |
| if (service_mask |
| &(tBTA_SERVICE_MASK)(1 << i)) |
| { |
| switch (i) |
| { |
| case BTA_HFP_SERVICE_ID: |
| { |
| uuid16_to_uuid128(UUID_SERVCLASS_AG_HANDSFREE, |
| p_uuid+num_uuids); |
| num_uuids++; |
| } |
| /* intentional fall through: Send both BFP & HSP UUIDs if HFP is enabled */ |
| case BTA_HSP_SERVICE_ID: |
| { |
| uuid16_to_uuid128(UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY, |
| p_uuid+num_uuids); |
| num_uuids++; |
| }break; |
| case BTA_A2DP_SERVICE_ID: |
| { |
| uuid16_to_uuid128(UUID_SERVCLASS_AUDIO_SOURCE, |
| p_uuid+num_uuids); |
| num_uuids++; |
| }break; |
| } |
| } |
| } |
| property->len = (num_uuids)*sizeof(bt_uuid_t); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /* fall through for other properties */ |
| if(!cfg2prop(NULL, property)) |
| { |
| return btif_dm_get_adapter_property(property); |
| } |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_set_adapter_property |
| ** |
| ** Description BTIF storage API - Stores the adapter property |
| ** to NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the store was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_set_adapter_property(bt_property_t *property) |
| { |
| return prop2cfg(NULL, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_get_remote_device_property |
| ** |
| ** Description BTIF storage API - Fetches the remote device property->type |
| ** from NVRAM and fills property->val. |
| ** Caller should provide memory for property->val and |
| ** set the property->val |
| ** |
| ** Returns BT_STATUS_SUCCESS if the fetch was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_get_remote_device_property(bt_bdaddr_t *remote_bd_addr, |
| bt_property_t *property) |
| { |
| return cfg2prop(remote_bd_addr, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL; |
| } |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_set_remote_device_property |
| ** |
| ** Description BTIF storage API - Stores the remote device property |
| ** to NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the store was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_set_remote_device_property(bt_bdaddr_t *remote_bd_addr, |
| bt_property_t *property) |
| { |
| return prop2cfg(remote_bd_addr, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_add_remote_device |
| ** |
| ** Description BTIF storage API - Adds a newly discovered device to NVRAM |
| ** along with the timestamp. Also, stores the various |
| ** properties - RSSI, BDADDR, NAME (if found in EIR) |
| ** |
| ** Returns BT_STATUS_SUCCESS if the store was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_add_remote_device(bt_bdaddr_t *remote_bdaddr, |
| uint32_t num_properties, |
| bt_property_t *properties) |
| { |
| uint32_t i = 0; |
| /* TODO: If writing a property, fails do we go back undo the earlier |
| * written properties? */ |
| for (i=0; i < num_properties; i++) |
| { |
| /* Ignore the RSSI as this is not stored in DB */ |
| if (properties[i].type == BT_PROPERTY_REMOTE_RSSI) |
| continue; |
| |
| /* BD_ADDR for remote device needs special handling as we also store timestamp */ |
| if (properties[i].type == BT_PROPERTY_BDADDR) |
| { |
| bt_property_t addr_prop; |
| memcpy(&addr_prop, &properties[i], sizeof(bt_property_t)); |
| addr_prop.type = BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP; |
| btif_storage_set_remote_device_property(remote_bdaddr, |
| &addr_prop); |
| } |
| else |
| { |
| btif_storage_set_remote_device_property(remote_bdaddr, |
| &properties[i]); |
| } |
| } |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_add_bonded_device |
| ** |
| ** Description BTIF storage API - Adds the newly bonded device to NVRAM |
| ** along with the link-key, Key type and Pin key length |
| ** |
| ** Returns BT_STATUS_SUCCESS if the store was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| |
| bt_status_t btif_storage_add_bonded_device(bt_bdaddr_t *remote_bd_addr, |
| LINK_KEY link_key, |
| uint8_t key_type, |
| uint8_t pin_length) |
| { |
| bdstr_t bdstr; |
| bd2str(remote_bd_addr, &bdstr); |
| int ret = btif_config_set_int("Remote", bdstr, "LinkKeyType", (int)key_type); |
| ret &= btif_config_set_int("Remote", bdstr, "PinLength", (int)pin_length); |
| ret &= btif_config_set("Remote", bdstr, "LinkKey", (const char*)link_key, sizeof(LINK_KEY), BTIF_CFG_TYPE_BIN); |
| btif_config_save(); |
| return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_remove_bonded_device |
| ** |
| ** Description BTIF storage API - Deletes the bonded device from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the deletion was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_remove_bonded_device(bt_bdaddr_t *remote_bd_addr) |
| { |
| bdstr_t bdstr; |
| bd2str(remote_bd_addr, &bdstr); |
| BTIF_TRACE_DEBUG1("in bd addr:%s", bdstr); |
| int ret = btif_config_remove("Remote", bdstr, "LinkKeyType"); |
| ret &= btif_config_remove("Remote", bdstr, "PinLength"); |
| ret &= btif_config_remove("Remote", bdstr, "LinkKey"); |
| btif_config_save(); |
| return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_load_bonded_devices |
| ** |
| ** Description BTIF storage API - Loads all the bonded devices from NVRAM |
| ** and adds to the BTA. |
| ** Additionally, this API also invokes the adaper_properties_cb |
| ** and remote_device_properties_cb for each of the bonded devices. |
| ** |
| ** Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_load_bonded_devices(void) |
| { |
| char *fname; |
| btif_bonded_devices_t bonded_devices; |
| uint32_t i = 0; |
| bt_property_t adapter_props[6]; |
| uint32_t num_props = 0; |
| bt_property_t remote_properties[8]; |
| bt_bdaddr_t addr; |
| bt_bdname_t name, alias; |
| bt_scan_mode_t mode; |
| uint32_t disc_timeout; |
| bt_bdaddr_t *devices_list; |
| bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS]; |
| bt_uuid_t remote_uuids[BT_MAX_NUM_UUIDS]; |
| uint32_t cod, devtype; |
| |
| btif_in_fetch_bonded_devices(&bonded_devices, 1); |
| |
| /* Now send the adapter_properties_cb with all adapter_properties */ |
| { |
| memset(adapter_props, 0, sizeof(adapter_props)); |
| |
| /* BD_ADDR */ |
| BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_BDADDR, &addr, sizeof(addr), |
| adapter_props[num_props]); |
| num_props++; |
| |
| /* BD_NAME */ |
| BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_BDNAME, &name, sizeof(name), |
| adapter_props[num_props]); |
| num_props++; |
| |
| /* SCAN_MODE */ |
| /* TODO: At the time of BT on, always report the scan mode as 0 irrespective |
| of the scan_mode during the previous enable cycle. |
| This needs to be re-visited as part of the app/stack enable sequence |
| synchronization */ |
| mode = BT_SCAN_MODE_NONE; |
| adapter_props[num_props].type = BT_PROPERTY_ADAPTER_SCAN_MODE; |
| adapter_props[num_props].len = sizeof(mode); |
| adapter_props[num_props].val = &mode; |
| num_props++; |
| |
| /* DISC_TIMEOUT */ |
| BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT, |
| &disc_timeout, sizeof(disc_timeout), |
| adapter_props[num_props]); |
| num_props++; |
| |
| /* BONDED_DEVICES */ |
| devices_list = (bt_bdaddr_t*)malloc(sizeof(bt_bdaddr_t)*bonded_devices.num_devices); |
| adapter_props[num_props].type = BT_PROPERTY_ADAPTER_BONDED_DEVICES; |
| adapter_props[num_props].len = bonded_devices.num_devices * sizeof(bt_bdaddr_t); |
| adapter_props[num_props].val = devices_list; |
| for (i=0; i < bonded_devices.num_devices; i++) |
| { |
| memcpy(devices_list + i, &bonded_devices.devices[i], sizeof(bt_bdaddr_t)); |
| } |
| num_props++; |
| |
| /* LOCAL UUIDs */ |
| BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_UUIDS, |
| local_uuids, sizeof(local_uuids), |
| adapter_props[num_props]); |
| num_props++; |
| |
| btif_adapter_properties_evt(BT_STATUS_SUCCESS, num_props, adapter_props); |
| |
| free(devices_list); |
| } |
| |
| BTIF_TRACE_EVENT2("%s: %d bonded devices found", __FUNCTION__, bonded_devices.num_devices); |
| |
| { |
| for (i = 0; i < bonded_devices.num_devices; i++) |
| { |
| bt_bdaddr_t *p_remote_addr; |
| |
| num_props = 0; |
| p_remote_addr = &bonded_devices.devices[i]; |
| memset(remote_properties, 0, sizeof(remote_properties)); |
| BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_BDNAME, |
| &name, sizeof(name), |
| remote_properties[num_props]); |
| num_props++; |
| |
| BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_REMOTE_FRIENDLY_NAME, |
| &alias, sizeof(alias), |
| remote_properties[num_props]); |
| num_props++; |
| |
| BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_CLASS_OF_DEVICE, |
| &cod, sizeof(cod), |
| remote_properties[num_props]); |
| num_props++; |
| |
| BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_TYPE_OF_DEVICE, |
| &devtype, sizeof(devtype), |
| remote_properties[num_props]); |
| num_props++; |
| |
| BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_UUIDS, |
| remote_uuids, sizeof(remote_uuids), |
| remote_properties[num_props]); |
| num_props++; |
| |
| btif_remote_properties_evt(BT_STATUS_SUCCESS, p_remote_addr, |
| num_props, remote_properties); |
| } |
| } |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_add_hid_device_info |
| ** |
| ** Description BTIF storage API - Adds the hid information of bonded hid devices-to NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the store was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| |
| bt_status_t btif_storage_add_hid_device_info(bt_bdaddr_t *remote_bd_addr, |
| UINT16 attr_mask, UINT8 sub_class, |
| UINT8 app_id, UINT16 vendor_id, |
| UINT16 product_id, UINT16 version, |
| UINT8 ctry_code, UINT16 dl_len, UINT8 *dsc_list) |
| { |
| bdstr_t bdstr; |
| bd2str(remote_bd_addr, &bdstr); |
| btif_config_set_int("Remote", bdstr, "HidAttrMask", attr_mask); |
| btif_config_set_int("Remote", bdstr, "HidSubClass", sub_class); |
| btif_config_set_int("Remote", bdstr, "HidAppId", app_id); |
| btif_config_set_int("Remote", bdstr, "HidVendorId", vendor_id); |
| btif_config_set_int("Remote", bdstr, "HidProductId", product_id); |
| btif_config_set_int("Remote", bdstr, "HidVersion", version); |
| btif_config_set_int("Remote", bdstr, "HidCountryCode", ctry_code); |
| if(dl_len > 0) |
| btif_config_set("Remote", bdstr, "HidDescriptor", (const char*)dsc_list, dl_len, BTIF_CFG_TYPE_BIN); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_load_bonded_hid_info |
| ** |
| ** Description BTIF storage API - Loads hid info for all the bonded devices from NVRAM |
| ** and adds those devices to the BTA_HH. |
| ** |
| ** Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_load_bonded_hid_info(void) |
| { |
| bt_bdaddr_t bd_addr; |
| tBTA_HH_DEV_DSCP_INFO dscp_info; |
| uint32_t i; |
| uint16_t attr_mask; |
| uint8_t sub_class; |
| uint8_t app_id; |
| |
| char kname[128], vname[128]; |
| short kpos; |
| int kname_size; |
| kname_size = sizeof(kname); |
| kname[0] = 0; |
| kpos = 0; |
| memset(&dscp_info, 0, sizeof(dscp_info)); |
| do |
| { |
| kpos = btif_config_next_key(kpos, "Remote", kname, &kname_size); |
| BTIF_TRACE_DEBUG2("Remote device:%s, size:%d", kname, kname_size); |
| int value; |
| if(btif_config_get_int("Remote", kname, "HidAttrMask", &value)) |
| { |
| attr_mask = (uint16_t)value; |
| |
| btif_config_get_int("Remote", kname, "HidSubClass", &value); |
| sub_class = (uint8_t)value; |
| |
| btif_config_get_int("Remote", kname, "HidAppId", &value); |
| app_id = (uint8_t)value; |
| |
| btif_config_get_int("Remote", kname, "HidVendorId", &value); |
| dscp_info.vendor_id = (uint16_t) value; |
| |
| btif_config_get_int("Remote", kname, "HidProductId", &value); |
| dscp_info.product_id = (uint16_t) value; |
| |
| btif_config_get_int("Remote", kname, "HidVersion", &value); |
| dscp_info.version = (uint8_t) value; |
| |
| btif_config_get_int("Remote", kname, "HidCountryCode", &value); |
| dscp_info.ctry_code = (uint8_t) value; |
| |
| int len = 0; |
| int type; |
| btif_config_get("Remote", kname, "HidDescriptor", NULL, &len, &type); |
| if(len > 0) |
| { |
| dscp_info.descriptor.dl_len = (uint16_t)len; |
| dscp_info.descriptor.dsc_list = (uint8_t*)alloca(len); |
| btif_config_get("Remote", kname, "HidDescriptor", (char*)dscp_info.descriptor.dsc_list, &len, &type); |
| } |
| str2bd(kname, &bd_addr); |
| // add extracted information to BTA HH |
| if (btif_hh_add_added_dev(bd_addr,attr_mask)) |
| { |
| BTA_HhAddDev(bd_addr.address, attr_mask, sub_class, |
| app_id, dscp_info); |
| } |
| } |
| } while(kpos != -1); |
| |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_remove_hid_info |
| ** |
| ** Description BTIF storage API - Deletes the bonded hid device info from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the deletion was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_remove_hid_info(bt_bdaddr_t *remote_bd_addr) |
| { |
| char *fname; |
| int ret; |
| bdstr_t bdstr; |
| bd2str(remote_bd_addr, &bdstr); |
| |
| btif_config_remove("Remote", bdstr, "HidAttrMask"); |
| btif_config_remove("Remote", bdstr, "HidSubClass"); |
| btif_config_remove("Remote", bdstr, "HidAppId"); |
| btif_config_remove("Remote", bdstr, "HidVendorId"); |
| btif_config_remove("Remote", bdstr, "HidProductId"); |
| btif_config_remove("Remote", bdstr, "HidVersion"); |
| btif_config_remove("Remote", bdstr, "HidCountryCode"); |
| btif_config_remove("Remote", bdstr, "HidDescriptor"); |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_read_hl_apps_cb |
| ** |
| ** Description BTIF storage API - Read HL application control block from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_read_hl_apps_cb(char *value, int value_size) |
| { |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| int read_size=value_size, read_type=BTIF_CFG_TYPE_BIN; |
| |
| if (!btif_config_exist("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB)) |
| { |
| memset(value, value_size, 0); |
| if (!btif_config_set("Local", BTIF_STORAGE_HL_APP,BTIF_STORAGE_HL_APP_CB, |
| value, value_size, BTIF_CFG_TYPE_BIN)) |
| { |
| bt_status = BT_STATUS_FAIL; |
| } |
| else |
| { |
| btif_config_save(); |
| } |
| } |
| else |
| { |
| if (!btif_config_get("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB, |
| value, &read_size, &read_type)) |
| { |
| bt_status = BT_STATUS_FAIL; |
| } |
| else |
| { |
| if ((read_size != value_size) || (read_type != BTIF_CFG_TYPE_BIN) ) |
| { |
| BTIF_TRACE_ERROR4("%s value_size=%d read_size=%d read_type=%d", |
| __FUNCTION__, value_size, read_size, read_type); |
| bt_status = BT_STATUS_FAIL; |
| } |
| } |
| |
| } |
| |
| BTIF_TRACE_DEBUG3("%s status=%d value_size=%d", __FUNCTION__, bt_status, value_size); |
| return bt_status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_write_hl_apps_cb |
| ** |
| ** Description BTIF storage API - Write HL application control block to NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_write_hl_apps_cb(char *value, int value_size) |
| { |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| |
| if (!btif_config_set("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB, |
| value, value_size, BTIF_CFG_TYPE_BIN)) |
| { |
| bt_status = BT_STATUS_FAIL; |
| } |
| else |
| { |
| btif_config_save(); |
| } |
| BTIF_TRACE_DEBUG3("%s status=%d value_size=%d", __FUNCTION__, bt_status, value_size); |
| |
| return bt_status; |
| } |
| |
| bt_status_t btif_storage_read_hl_data(char *fname, char *value, int value_size) |
| { |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| int read_size=value_size, read_type=BTIF_CFG_TYPE_BIN; |
| |
| if (!btif_config_get("Local", BTIF_STORAGE_HL_APP, fname, value, &read_size, &read_type)) |
| { |
| bt_status = BT_STATUS_FAIL; |
| } |
| else |
| { |
| if ((read_size != value_size) || (read_type != BTIF_CFG_TYPE_BIN) ) |
| { |
| BTIF_TRACE_ERROR4("%s value_size=%d read_size=%d read_type=%d", |
| __FUNCTION__, value_size, read_size, read_type); |
| bt_status = BT_STATUS_FAIL; |
| } |
| } |
| |
| return bt_status; |
| } |
| |
| bt_status_t btif_storage_write_hl_data(char *fname, char *value, int value_size) |
| { |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| |
| if (!btif_config_set("Local", BTIF_STORAGE_HL_APP, fname, value, value_size, BTIF_CFG_TYPE_BIN)) |
| { |
| bt_status = BT_STATUS_FAIL; |
| } |
| else |
| { |
| btif_config_save(); |
| } |
| BTIF_TRACE_DEBUG3("%s status=%d value_size=%d", __FUNCTION__, bt_status, value_size); |
| |
| return bt_status; |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_read_hl_app_data |
| ** |
| ** Description BTIF storage API - Read HL application configuration from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_read_hl_app_data(UINT8 app_idx, char *value, int value_size) |
| { |
| char fname[256]; |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| |
| BTIF_TRACE_DEBUG1("%s ", __FUNCTION__); |
| sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_DATA, app_idx); |
| bt_status = btif_storage_read_hl_data(fname, value, value_size); |
| BTIF_TRACE_DEBUG3("%s read item:(%s) bt_status=%d", __FUNCTION__, fname, bt_status); |
| |
| return bt_status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_write_hl_app_data |
| ** |
| ** Description BTIF storage API - Write HL application MDL configuration from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_write_hl_app_data(UINT8 app_idx, char *value, int value_size) |
| { |
| char fname[256]; |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| |
| |
| BTIF_TRACE_DEBUG1("%s ", __FUNCTION__); |
| sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_DATA, app_idx); |
| bt_status = btif_storage_write_hl_data(fname, value, value_size); |
| BTIF_TRACE_DEBUG3("%s write item:(%s) bt_status=%d", __FUNCTION__, fname, bt_status); |
| |
| return bt_status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_read_hl_mdl_data |
| ** |
| ** Description BTIF storage API - Read HL application MDL configuration from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_read_hl_mdl_data(UINT8 app_idx, char *value, int value_size) |
| { |
| char fname[256], tmp[3]; |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| int status, i, buf_size; |
| char *p_buf; |
| |
| BTIF_TRACE_DEBUG1("%s ", __FUNCTION__); |
| sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_MDL_DATA, app_idx); |
| bt_status = btif_storage_read_hl_data(fname, value, value_size); |
| BTIF_TRACE_DEBUG3("%s read item:(%s) bt_status=%d", __FUNCTION__, fname, bt_status); |
| |
| return bt_status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_write_hl_mdl_data |
| ** |
| ** Description BTIF storage API - Write HL application MDL configuration from NVRAM |
| ** |
| ** Returns BT_STATUS_SUCCESS if the operation was successful, |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_write_hl_mdl_data(UINT8 app_idx, char *value, int value_size) |
| { |
| char fname[256]; |
| bt_status_t bt_status = BT_STATUS_SUCCESS; |
| int status, i, buf_size; |
| char *p_buf; |
| |
| BTIF_TRACE_DEBUG1("%s ", __FUNCTION__); |
| sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_MDL_DATA, app_idx); |
| bt_status = btif_storage_write_hl_data(fname, value, value_size); |
| BTIF_TRACE_DEBUG3("%s write item:(%s) bt_status=%d", __FUNCTION__, fname, bt_status); |
| |
| return bt_status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_load_autopair_device_list |
| ** |
| ** Description BTIF storage API - Populates auto pair device list |
| ** |
| ** Returns BT_STATUS_SUCCESS if the auto pair blacklist is successfully populated |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| |
| bt_status_t btif_storage_load_autopair_device_list() |
| { |
| char *key_name, *key_value; |
| int i=0; |
| char linebuf[BTIF_STORAGE_MAX_LINE_SZ]; |
| char *line; |
| FILE *fp; |
| |
| if(!btif_config_exist("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, NULL)) |
| { |
| /* first time loading of auto pair blacklist configuration */ |
| |
| fp = fopen (BTIF_AUTO_PAIR_CONF_FILE, "r"); |
| |
| if (fp == NULL) |
| { |
| ALOGE("%s: Failed to open auto pair blacklist conf file at %s", __FUNCTION__,BTIF_AUTO_PAIR_CONF_FILE ); |
| return BT_STATUS_FAIL; |
| } |
| |
| /* read through auto_pairing.conf file and create the key value pairs specific to auto pair blacklist devices */ |
| while (fgets(linebuf, BTIF_STORAGE_MAX_LINE_SZ, fp) != NULL) |
| { |
| /* trip leading white spaces */ |
| while (linebuf[i] == BTIF_AUTO_PAIR_CONF_SPACE) |
| i++; |
| |
| /* skip commented lines */ |
| if (linebuf[i] == BTIF_AUTO_PAIR_CONF_COMMENT) |
| continue; |
| |
| line = (char*)&(linebuf[i]); |
| |
| if (line == NULL) |
| continue; |
| |
| key_name = strtok(line, BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER); |
| |
| if (key_name == NULL) |
| continue; |
| else if((strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR) == 0) || |
| (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME) ==0) || |
| (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST) ==0 ) || |
| (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME) == 0) || |
| (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR) == 0)) |
| { |
| key_value = strtok(NULL, BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER); |
| btif_config_set_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, key_name, key_value); |
| } |
| } |
| fclose(fp); |
| } |
| return BT_STATUS_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_is_device_autopair_blacklisted |
| ** |
| ** Description BTIF storage API Checks if the given device is blacklisted for auto pairing |
| ** |
| ** Returns TRUE if the device is found in the auto pair blacklist |
| ** FALSE otherwise |
| ** |
| *******************************************************************************/ |
| BOOLEAN btif_storage_is_device_autopair_blacklisted(bt_bdaddr_t *remote_dev_addr) |
| { |
| char *token; |
| int ret; |
| bdstr_t bdstr; |
| char *dev_name_str; |
| uint8_t i = 0; |
| char value[BTIF_STORAGE_MAX_LINE_SZ]; |
| int value_size = sizeof(value); |
| |
| bd2str(remote_dev_addr, &bdstr); |
| |
| /* Consider only Lower Address Part from BD Address */ |
| bdstr[8] = '\0'; |
| |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR, value, &value_size)) |
| { |
| if (strcasestr(value,bdstr) != NULL) |
| return TRUE; |
| } |
| |
| dev_name_str = BTM_SecReadDevName((remote_dev_addr->address)); |
| |
| if (dev_name_str != NULL) |
| { |
| value_size = sizeof(value); |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME, value, &value_size)) |
| { |
| if (strstr(value,dev_name_str) != NULL) |
| return TRUE; |
| } |
| value_size = sizeof(value); |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME, value, &value_size)) |
| { |
| token = strtok(value, BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR); |
| while (token != NULL) |
| { |
| if (strstr(dev_name_str, token) != NULL) |
| return TRUE; |
| |
| token = strtok(NULL, BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR); |
| } |
| } |
| } |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, value, &value_size)) |
| { |
| if (strstr(value,bdstr) != NULL) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_add_device_to_autopair_blacklist |
| ** |
| ** Description BTIF storage API - Add a remote device to the auto pairing blacklist |
| ** |
| ** Returns BT_STATUS_SUCCESS if the device is successfully added to the auto pair blacklist |
| ** BT_STATUS_FAIL otherwise |
| ** |
| *******************************************************************************/ |
| bt_status_t btif_storage_add_device_to_autopair_blacklist(bt_bdaddr_t *remote_dev_addr) |
| { |
| int ret; |
| bdstr_t bdstr; |
| char linebuf[BTIF_STORAGE_MAX_LINE_SZ+20]; |
| char input_value [20]; |
| |
| bd2str(remote_dev_addr, &bdstr); |
| strncpy(input_value, (char*)bdstr, 20); |
| strncat(input_value,BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR, 20); |
| int line_size = sizeof(linebuf); |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, linebuf, &line_size)) |
| { |
| /* Append this address to the dynamic List of BD address */ |
| strncat (linebuf, input_value, BTIF_STORAGE_MAX_LINE_SZ); |
| } |
| else |
| { |
| strncpy( linebuf,input_value, BTIF_STORAGE_MAX_LINE_SZ); |
| } |
| |
| /* Write back the key value */ |
| ret = btif_config_set_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, linebuf); |
| |
| return ret ? BT_STATUS_SUCCESS:BT_STATUS_FAIL; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btif_storage_is_fixed_pin_zeros_keyboard |
| ** |
| ** Description BTIF storage API - checks if this device has fixed PIN key device list |
| ** |
| ** Returns TRUE if the device is found in the fixed pin keyboard device list |
| ** FALSE otherwise |
| ** |
| *******************************************************************************/ |
| BOOLEAN btif_storage_is_fixed_pin_zeros_keyboard(bt_bdaddr_t *remote_dev_addr) |
| { |
| int ret; |
| bdstr_t bdstr; |
| char *dev_name_str; |
| uint8_t i = 0; |
| char linebuf[BTIF_STORAGE_MAX_LINE_SZ]; |
| |
| bd2str(remote_dev_addr, &bdstr); |
| |
| /*consider on LAP part of BDA string*/ |
| bdstr[8] = '\0'; |
| |
| int line_size = sizeof(linebuf); |
| if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, |
| BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST, linebuf, &line_size)) |
| { |
| if (strcasestr(linebuf,bdstr) != NULL) |
| return TRUE; |
| } |
| return FALSE; |
| |
| } |
