| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #ifndef HCIMSGS_H |
| #define HCIMSGS_H |
| |
| #include "bt_target.h" |
| #include "hcidefs.h" |
| #include "bt_types.h" |
| |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Message by message.... */ |
| |
| #define HCIC_GET_UINT8(p, off) (UINT8)(*((UINT8 *)((p) + 1) + p->offset + 3 + (off))) |
| |
| #define HCIC_GET_UINT16(p, off) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8))) |
| |
| #define HCIC_GET_UINT32(p, off) (UINT32)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 2) << 16) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 3) << 24))) |
| |
| #define HCIC_GET_ARRAY(p, off, x, len) \ |
| { \ |
| UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x; \ |
| int ii; for (ii = 0; ii < len; ii++) *rr++ = *qq++; \ |
| } |
| |
| #define HCIC_GET_ARRAY16(p, off, x) \ |
| { \ |
| UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + 15; \ |
| int ii; for (ii = 0; ii < 16; ii++) *rr-- = *qq++; \ |
| } |
| |
| #define HCIC_GET_BDADDR(p, off, x) \ |
| { \ |
| UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + BD_ADDR_LEN - 1; \ |
| int ii; for (ii = 0; ii < BD_ADDR_LEN; ii++) *rr-- = *qq++; \ |
| } |
| |
| #define HCIC_GET_DEVCLASS(p, off, x) \ |
| { \ |
| UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + DEV_CLASS_LEN - 1; \ |
| int ii; for (ii = 0; ii < DEV_CLASS_LEN; ii++) *rr-- = *qq++; \ |
| } |
| |
| #define HCIC_GET_LAP(p, off, x) \ |
| { \ |
| UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + LAP_LEN - 1; \ |
| int ii; for (ii = 0; ii < LAP_LEN; ii++) *rr-- = *qq++; \ |
| } |
| |
| #define HCIC_GET_POINTER(p, off) ((UINT8 *)((p) + 1) + p->offset + 3 + (off)) |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration, |
| UINT8 response_cnt); |
| |
| #define HCIC_PARAM_SIZE_INQUIRY 5 |
| |
| |
| #define HCIC_INQ_INQ_LAP_OFF 0 |
| #define HCIC_INQ_DUR_OFF 3 |
| #define HCIC_INQ_RSP_CNT_OFF 4 |
| /* Inquiry */ |
| |
| /* Inquiry Cancel */ |
| HCI_API extern BOOLEAN btsnd_hcic_inq_cancel(void); |
| |
| #define HCIC_PARAM_SIZE_INQ_CANCEL 0 |
| |
| /* Periodic Inquiry Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period, |
| const LAP inq_lap, UINT8 duration, |
| UINT8 response_cnt); |
| |
| #define HCIC_PARAM_SIZE_PER_INQ_MODE 9 |
| |
| #define HCI_PER_INQ_MAX_INTRVL_OFF 0 |
| #define HCI_PER_INQ_MIN_INTRVL_OFF 2 |
| #define HCI_PER_INQ_INQ_LAP_OFF 4 |
| #define HCI_PER_INQ_DURATION_OFF 7 |
| #define HCI_PER_INQ_RSP_CNT_OFF 8 |
| /* Periodic Inquiry Mode */ |
| |
| /* Exit Periodic Inquiry Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_exit_per_inq(void); |
| |
| #define HCIC_PARAM_SIZE_EXIT_PER_INQ 0 |
| /* Create Connection */ |
| HCI_API extern BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types, |
| UINT8 page_scan_rep_mode, |
| UINT8 page_scan_mode, |
| UINT16 clock_offset, |
| UINT8 allow_switch); |
| |
| #define HCIC_PARAM_SIZE_CREATE_CONN 13 |
| |
| #define HCIC_CR_CONN_BD_ADDR_OFF 0 |
| #define HCIC_CR_CONN_PKT_TYPES_OFF 6 |
| #define HCIC_CR_CONN_REP_MODE_OFF 8 |
| #define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9 |
| #define HCIC_CR_CONN_CLK_OFF_OFF 10 |
| #define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12 |
| /* Create Connection */ |
| |
| /* Disconnect */ |
| HCI_API extern BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason); |
| |
| #define HCIC_PARAM_SIZE_DISCONNECT 3 |
| |
| #define HCI_DISC_HANDLE_OFF 0 |
| #define HCI_DISC_REASON_OFF 2 |
| /* Disconnect */ |
| |
| #if BTM_SCO_INCLUDED == TRUE |
| /* Add SCO Connection */ |
| HCI_API extern BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types); |
| #endif /* BTM_SCO_INCLUDED */ |
| |
| #define HCIC_PARAM_SIZE_ADD_SCO_CONN 4 |
| |
| #define HCI_ADD_SCO_HANDLE_OFF 0 |
| #define HCI_ADD_SCO_PACKET_TYPES_OFF 2 |
| /* Add SCO Connection */ |
| |
| /* Create Connection Cancel */ |
| HCI_API extern BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest); |
| |
| #define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6 |
| |
| #define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0 |
| /* Create Connection Cancel */ |
| |
| /* Accept Connection Request */ |
| HCI_API extern BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role); |
| |
| #define HCIC_PARAM_SIZE_ACCEPT_CONN 7 |
| |
| #define HCI_ACC_CONN_BD_ADDR_OFF 0 |
| #define HCI_ACC_CONN_ROLE_OFF 6 |
| /* Accept Connection Request */ |
| |
| /* Reject Connection Request */ |
| HCI_API extern BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason); |
| |
| #define HCIC_PARAM_SIZE_REJECT_CONN 7 |
| |
| #define HCI_REJ_CONN_BD_ADDR_OFF 0 |
| #define HCI_REJ_CONN_REASON_OFF 6 |
| /* Reject Connection Request */ |
| |
| /* Link Key Request Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr, |
| LINK_KEY link_key); |
| |
| #define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22 |
| |
| #define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0 |
| #define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6 |
| /* Link Key Request Reply */ |
| |
| /* Link Key Request Neg Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr); |
| |
| #define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6 |
| |
| #define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0 |
| /* Link Key Request Neg Reply */ |
| |
| /* PIN Code Request Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr, |
| UINT8 pin_code_len, |
| PIN_CODE pin_code); |
| |
| #define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23 |
| |
| #define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0 |
| #define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6 |
| #define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7 |
| /* PIN Code Request Reply */ |
| |
| /* Link Key Request Neg Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr); |
| |
| #define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6 |
| |
| #define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0 |
| /* Link Key Request Neg Reply */ |
| |
| /* Change Connection Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types); |
| |
| #define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4 |
| |
| #define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0 |
| #define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2 |
| /* Change Connection Type */ |
| |
| #define HCIC_PARAM_SIZE_CMD_HANDLE 2 |
| |
| #define HCI_CMD_HANDLE_HANDLE_OFF 0 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_auth_request (UINT16 handle); /* Authentication Request */ |
| |
| /* Set Connection Encryption */ |
| HCI_API extern BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable); |
| #define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3 |
| |
| |
| #define HCI_SET_ENCRYPT_HANDLE_OFF 0 |
| #define HCI_SET_ENCRYPT_ENABLE_OFF 2 |
| /* Set Connection Encryption */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_change_link_key (UINT16 handle); /* Change Connection Link Key */ |
| |
| /* Master Link Key */ |
| HCI_API extern BOOLEAN btsnd_hcic_master_link_key (BOOLEAN key_flag); |
| |
| #define HCIC_PARAM_SIZE_MASTER_LINK_KEY 1 |
| |
| #define HCI_MASTER_KEY_FLAG_OFF 0 |
| /* Master Link Key */ |
| |
| /* Remote Name Request */ |
| HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr, |
| UINT8 page_scan_rep_mode, |
| UINT8 page_scan_mode, |
| UINT16 clock_offset); |
| |
| #define HCIC_PARAM_SIZE_RMT_NAME_REQ 10 |
| |
| #define HCI_RMT_NAME_BD_ADDR_OFF 0 |
| #define HCI_RMT_NAME_REP_MODE_OFF 6 |
| #define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7 |
| #define HCI_RMT_NAME_CLK_OFF_OFF 8 |
| /* Remote Name Request */ |
| |
| /* Remote Name Request Cancel */ |
| HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr); |
| |
| #define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6 |
| |
| #define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0 |
| /* Remote Name Request Cancel */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle); /* Remote Features Request */ |
| |
| /* Remote Extended Features */ |
| HCI_API extern BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num); |
| |
| #define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3 |
| |
| #define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0 |
| #define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2 |
| /* Remote Extended Features */ |
| |
| |
| /* Local Extended Features */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_local_ext_features (UINT8 page_num); |
| |
| #define HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES 1 |
| |
| #define HCI_LOCAL_EXT_FEATURES_PAGE_NUM_OFF 0 |
| /* Local Extended Features */ |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle); /* Remote Version Info Request */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle); /* Remote Clock Offset */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle); /* Remote LMP Handle */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle, |
| UINT32 tx_bw, UINT32 rx_bw, |
| UINT16 max_latency, UINT16 voice, |
| UINT8 retrans_effort, |
| UINT16 packet_types); |
| #define HCIC_PARAM_SIZE_SETUP_ESCO 17 |
| |
| #define HCI_SETUP_ESCO_HANDLE_OFF 0 |
| #define HCI_SETUP_ESCO_TX_BW_OFF 2 |
| #define HCI_SETUP_ESCO_RX_BW_OFF 6 |
| #define HCI_SETUP_ESCO_MAX_LAT_OFF 10 |
| #define HCI_SETUP_ESCO_VOICE_OFF 12 |
| #define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14 |
| #define HCI_SETUP_ESCO_PKT_TYPES_OFF 15 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr, |
| UINT32 tx_bw, UINT32 rx_bw, |
| UINT16 max_latency, |
| UINT16 content_fmt, |
| UINT8 retrans_effort, |
| UINT16 packet_types); |
| #define HCIC_PARAM_SIZE_ACCEPT_ESCO 21 |
| |
| #define HCI_ACCEPT_ESCO_BDADDR_OFF 0 |
| #define HCI_ACCEPT_ESCO_TX_BW_OFF 6 |
| #define HCI_ACCEPT_ESCO_RX_BW_OFF 10 |
| #define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14 |
| #define HCI_ACCEPT_ESCO_VOICE_OFF 16 |
| #define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18 |
| #define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason); |
| #define HCIC_PARAM_SIZE_REJECT_ESCO 7 |
| |
| #define HCI_REJECT_ESCO_BDADDR_OFF 0 |
| #define HCI_REJECT_ESCO_REASON_OFF 6 |
| |
| /* Hold Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period, |
| UINT16 min_hold_period); |
| |
| #define HCIC_PARAM_SIZE_HOLD_MODE 6 |
| |
| #define HCI_HOLD_MODE_HANDLE_OFF 0 |
| #define HCI_HOLD_MODE_MAX_PER_OFF 2 |
| #define HCI_HOLD_MODE_MIN_PER_OFF 4 |
| /* Hold Mode */ |
| |
| /* Sniff Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle, |
| UINT16 max_sniff_period, |
| UINT16 min_sniff_period, |
| UINT16 sniff_attempt, |
| UINT16 sniff_timeout); |
| |
| #define HCIC_PARAM_SIZE_SNIFF_MODE 10 |
| |
| |
| #define HCI_SNIFF_MODE_HANDLE_OFF 0 |
| #define HCI_SNIFF_MODE_MAX_PER_OFF 2 |
| #define HCI_SNIFF_MODE_MIN_PER_OFF 4 |
| #define HCI_SNIFF_MODE_ATTEMPT_OFF 6 |
| #define HCI_SNIFF_MODE_TIMEOUT_OFF 8 |
| /* Sniff Mode */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle); /* Exit Sniff Mode */ |
| |
| /* Park Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_park_mode (UINT16 handle, |
| UINT16 beacon_max_interval, |
| UINT16 beacon_min_interval); |
| |
| #define HCIC_PARAM_SIZE_PARK_MODE 6 |
| |
| #define HCI_PARK_MODE_HANDLE_OFF 0 |
| #define HCI_PARK_MODE_MAX_PER_OFF 2 |
| #define HCI_PARK_MODE_MIN_PER_OFF 4 |
| /* Park Mode */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle); /* Exit Park Mode */ |
| |
| /* QoS Setup */ |
| HCI_API extern BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags, |
| UINT8 service_type, |
| UINT32 token_rate, UINT32 peak, |
| UINT32 latency, UINT32 delay_var); |
| |
| #define HCIC_PARAM_SIZE_QOS_SETUP 20 |
| |
| #define HCI_QOS_HANDLE_OFF 0 |
| #define HCI_QOS_FLAGS_OFF 2 |
| #define HCI_QOS_SERVICE_TYPE_OFF 3 |
| #define HCI_QOS_TOKEN_RATE_OFF 4 |
| #define HCI_QOS_PEAK_BANDWIDTH_OFF 8 |
| #define HCI_QOS_LATENCY_OFF 12 |
| #define HCI_QOS_DELAY_VAR_OFF 16 |
| /* QoS Setup */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_role_discovery (UINT16 handle); /* Role Discovery */ |
| |
| /* Switch Role Request */ |
| HCI_API extern BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role); |
| |
| #define HCIC_PARAM_SIZE_SWITCH_ROLE 7 |
| |
| #define HCI_SWITCH_BD_ADDR_OFF 0 |
| #define HCI_SWITCH_ROLE_OFF 6 |
| /* Switch Role Request */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_policy_set(UINT16 handle); /* Read Policy Settings */ |
| |
| /* Write Policy Settings */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings); |
| |
| #define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4 |
| |
| #define HCI_WRITE_POLICY_HANDLE_OFF 0 |
| #define HCI_WRITE_POLICY_SETTINGS_OFF 2 |
| /* Write Policy Settings */ |
| |
| /* Read Default Policy Settings */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_def_policy_set(void); |
| |
| #define HCIC_PARAM_SIZE_READ_DEF_POLICY_SET 0 |
| /* Read Default Policy Settings */ |
| |
| /* Write Default Policy Settings */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings); |
| |
| #define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2 |
| |
| #define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0 |
| /* Write Default Policy Settings */ |
| |
| /* Flow Specification */ |
| HCI_API extern BOOLEAN btsnd_hcic_flow_specification(UINT16 handle, UINT8 flags, |
| UINT8 flow_direct, |
| UINT8 service_type, |
| UINT32 token_rate, |
| UINT32 token_bucket_size, |
| UINT32 peak, UINT32 latency); |
| |
| #define HCIC_PARAM_SIZE_FLOW_SPEC 21 |
| |
| #define HCI_FLOW_SPEC_HANDLE_OFF 0 |
| #define HCI_FLOW_SPEC_FLAGS_OFF 2 |
| #define HCI_FLOW_SPEC_FLOW_DIRECT_OFF 3 |
| #define HCI_FLOW_SPEC_SERVICE_TYPE_OFF 4 |
| #define HCI_FLOW_SPEC_TOKEN_RATE_OFF 5 |
| #define HCI_FLOW_SPEC_TOKEN_BUCKET_SIZE_OFF 9 |
| #define HCI_FLOW_SPEC_PEAK_BANDWIDTH_OFF 13 |
| #define HCI_FLOW_SPEC_LATENCY_OFF 17 |
| /* Flow Specification */ |
| |
| /****************************************** |
| ** Lisbon Features |
| *******************************************/ |
| #if BTM_SSR_INCLUDED == TRUE |
| /* Sniff Subrating */ |
| HCI_API extern BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat, |
| UINT16 min_remote_lat, |
| UINT16 min_local_lat); |
| |
| #define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8 |
| |
| #define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0 |
| #define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2 |
| #define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4 |
| #define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6 |
| /* Sniff Subrating */ |
| |
| #else /* BTM_SSR_INCLUDED == FALSE */ |
| |
| #define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE |
| |
| #endif /* BTM_SSR_INCLUDED */ |
| |
| /* Extended Inquiry Response */ |
| #if (BTM_EIR_SERVER_INCLUDED == TRUE) |
| HCI_API extern void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req); |
| |
| #define HCIC_PARAM_SIZE_EXT_INQ_RESP 241 |
| |
| #define HCIC_EXT_INQ_RESP_FEC_OFF 0 |
| #define HCIC_EXT_INQ_RESP_RESPONSE 1 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_ext_inquiry_response(void); /* Read Extended Inquiry Response */ |
| #else |
| #define btsnd_hcic_write_ext_inquiry_response(buffer, fec_req) |
| #define btsnd_hcic_read_ext_inquiry_response() FALSE |
| #endif |
| /* Write Simple Pairing Mode */ |
| /**** Simple Pairing Commands ****/ |
| HCI_API extern BOOLEAN btsnd_hcic_write_simple_pairing_mode(UINT8 mode); |
| |
| #define HCIC_PARAM_SIZE_W_SIMP_PAIR 1 |
| |
| #define HCIC_WRITE_SP_MODE_OFF 0 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_simple_pairing_mode (void); |
| |
| #define HCIC_PARAM_SIZE_R_SIMP_PAIR 0 |
| |
| /* Write Simple Pairing Debug Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_simp_pair_debug_mode(UINT8 debug_mode); |
| |
| #define HCIC_PARAM_SIZE_SIMP_PAIR_DBUG 1 |
| |
| #define HCIC_WRITE_SP_DBUG_MODE_OFF 0 |
| |
| /* IO Capabilities Response */ |
| HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability, |
| UINT8 oob_present, UINT8 auth_req); |
| |
| #define HCIC_PARAM_SIZE_IO_CAP_RESP 9 |
| |
| #define HCI_IO_CAP_BD_ADDR_OFF 0 |
| #define HCI_IO_CAPABILITY_OFF 6 |
| #define HCI_IO_CAP_OOB_DATA_OFF 7 |
| #define HCI_IO_CAP_AUTH_REQ_OFF 8 |
| |
| /* IO Capabilities Req Neg Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code); |
| |
| #define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7 |
| |
| #define HCI_IO_CAP_NR_BD_ADDR_OFF 0 |
| #define HCI_IO_CAP_NR_ERR_CODE 6 |
| |
| /* Read Local OOB Data */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_local_oob_data (void); |
| |
| #define HCIC_PARAM_SIZE_R_LOCAL_OOB 0 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes); |
| |
| #define HCIC_PARAM_SIZE_UCONF_REPLY 6 |
| |
| #define HCI_USER_CONF_BD_ADDR_OFF 0 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value); |
| |
| #define HCIC_PARAM_SIZE_U_PKEY_REPLY 10 |
| |
| #define HCI_USER_PASSKEY_BD_ADDR_OFF 0 |
| #define HCI_USER_PASSKEY_VALUE_OFF 6 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr); |
| |
| #define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6 |
| |
| #define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0 |
| |
| /* Remote OOB Data Request Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c, |
| UINT8 *p_r); |
| |
| #define HCIC_PARAM_SIZE_REM_OOB_REPLY 38 |
| |
| #define HCI_REM_OOB_DATA_BD_ADDR_OFF 0 |
| #define HCI_REM_OOB_DATA_C_OFF 6 |
| #define HCI_REM_OOB_DATA_R_OFF 22 |
| |
| /* Remote OOB Data Request Negative Reply */ |
| HCI_API extern BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr); |
| |
| #define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6 |
| |
| #define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0 |
| |
| /* Read Tx Power Level */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_inq_tx_power (void); |
| |
| #define HCIC_PARAM_SIZE_R_TX_POWER 0 |
| |
| /* Write Tx Power Level */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_inq_tx_power (INT8 level); |
| |
| #define HCIC_PARAM_SIZE_W_TX_POWER 1 |
| |
| #define HCIC_WRITE_TX_POWER_LEVEL_OFF 0 |
| /* Read Default Erroneous Data Reporting */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void); |
| |
| #define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0 |
| |
| /* Write Default Erroneous Data Reporting */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_default_erroneous_data_rpt (UINT8 level); |
| |
| #define HCIC_PARAM_SIZE_W_ERR_DATA_RPT 1 |
| |
| #define HCIC_WRITE_ERR_DATA_RPT_OFF 0 |
| |
| |
| #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE |
| HCI_API extern BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type); |
| |
| #define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3 |
| #endif |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif); |
| |
| #define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7 |
| |
| #define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0 |
| #define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_refresh_encryption_key(UINT16 handle); /* Refresh Encryption Key */ |
| |
| /**** end of Simple Pairing Commands ****/ |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_set_event_mask(UINT8 local_controller_id, BT_EVENT_MASK evt_mask); |
| |
| #define HCIC_PARAM_SIZE_SET_EVENT_MASK 8 |
| #define HCI_EVENT_MASK_MASK_OFF 0 |
| /* Set Event Mask */ |
| |
| /* Reset */ |
| HCI_API extern BOOLEAN btsnd_hcic_set_event_mask_page_2 (UINT8 local_controller_id, |
| BT_EVENT_MASK event_mask); |
| |
| #define HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2 8 |
| #define HCI_EVENT_MASK_MASK_OFF 0 |
| /* Set Event Mask Page 2 */ |
| |
| /* Reset */ |
| HCI_API extern BOOLEAN btsnd_hcic_reset(UINT8 local_controller_id); |
| |
| #define HCIC_PARAM_SIZE_RESET 0 |
| /* Reset */ |
| |
| /* Store Current Settings */ |
| #define MAX_FILT_COND (sizeof (BD_ADDR) + 1) |
| |
| HCI_API extern BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type, |
| UINT8 filt_cond_type, |
| UINT8 *filt_cond, |
| UINT8 filt_cond_len); |
| |
| #define HCIC_PARAM_SIZE_SET_EVT_FILTER 9 |
| |
| #define HCI_FILT_COND_FILT_TYPE_OFF 0 |
| #define HCI_FILT_COND_COND_TYPE_OFF 1 |
| #define HCI_FILT_COND_FILT_OFF 2 |
| /* Set Event Filter */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_flush(UINT8 local_controller_id, UINT16 handle); /* Flush */ |
| |
| /* Create New Unit Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_new_unit_key(void); |
| |
| #define HCIC_PARAM_SIZE_NEW_UNIT_KEY 0 |
| /* Create New Unit Type */ |
| |
| /* Read Stored Key */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_stored_key (BD_ADDR bd_addr, |
| BOOLEAN read_all_flag); |
| |
| #define HCIC_PARAM_SIZE_READ_STORED_KEY 7 |
| |
| #define HCI_READ_KEY_BD_ADDR_OFF 0 |
| #define HCI_READ_KEY_ALL_FLAG_OFF 6 |
| /* Read Stored Key */ |
| |
| #define MAX_WRITE_KEYS 10 |
| /* Write Stored Key */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_stored_key (UINT8 num_keys, BD_ADDR *bd_addr, |
| LINK_KEY *link_key); |
| |
| #define HCIC_PARAM_SIZE_WRITE_STORED_KEY sizeof(btmsg_hcic_write_stored_key_t) |
| |
| #define HCI_WRITE_KEY_NUM_KEYS_OFF 0 |
| #define HCI_WRITE_KEY_BD_ADDR_OFF 1 |
| #define HCI_WRITE_KEY_KEY_OFF 7 |
| /* only 0x0b keys cab be sent in one HCI command */ |
| #define HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD 0x0b |
| /* Write Stored Key */ |
| |
| /* Delete Stored Key */ |
| HCI_API extern BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag); |
| |
| #define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7 |
| |
| #define HCI_DELETE_KEY_BD_ADDR_OFF 0 |
| #define HCI_DELETE_KEY_ALL_FLAG_OFF 6 |
| /* Delete Stored Key */ |
| |
| /* Change Local Name */ |
| HCI_API extern BOOLEAN btsnd_hcic_change_name(BD_NAME name); |
| |
| #define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN |
| |
| #define HCI_CHANGE_NAME_NAME_OFF 0 |
| /* Change Local Name */ |
| |
| |
| #define HCIC_PARAM_SIZE_READ_CMD 0 |
| |
| #define HCIC_PARAM_SIZE_WRITE_PARAM1 1 |
| |
| #define HCIC_WRITE_PARAM1_PARAM_OFF 0 |
| |
| #define HCIC_PARAM_SIZE_WRITE_PARAM2 2 |
| |
| #define HCIC_WRITE_PARAM2_PARAM_OFF 0 |
| |
| #define HCIC_PARAM_SIZE_WRITE_PARAM3 3 |
| |
| #define HCIC_WRITE_PARAM3_PARAM_OFF 0 |
| |
| #define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_pin_type(void); /* Read PIN Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_pin_type(UINT8 type); /* Write PIN Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_auto_accept(void); /* Read Auto Accept */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag); /* Write Auto Accept */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_name (void); /* Read Local Name */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_conn_acc_tout(UINT8 local_controller_id); /* Read Connection Accept Timout */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_conn_acc_tout(UINT8 local_controller_id, UINT16 tout); /* Write Connection Accept Timout */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_page_tout(void); /* Read Page Timout */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout); /* Write Page Timout */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_scan_enable(void); /* Read Scan Enable */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag); /* Write Scan Enable */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_cfg(void); /* Read Page Scan Activity */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval, |
| UINT16 window); /* Write Page Scan Activity */ |
| |
| #define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4 |
| |
| #define HCI_SCAN_CFG_INTERVAL_OFF 0 |
| #define HCI_SCAN_CFG_WINDOW_OFF 2 |
| /* Write Page Scan Activity */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_cfg(void); /* Read Inquiry Scan Activity */ |
| |
| /* Write Inquiry Scan Activity */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window); |
| |
| #define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4 |
| |
| #define HCI_SCAN_CFG_INTERVAL_OFF 0 |
| #define HCI_SCAN_CFG_WINDOW_OFF 2 |
| /* Write Inquiry Scan Activity */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_auth_enable(void); /* Read Authentication Enable */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag); /* Write Authentication Enable */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_encr_mode (void); /* Read encryption mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_encr_mode (UINT8 mode); /* Write encryption mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_dev_class(void); /* Read Class of Device */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev); /* Write Class of Device */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_voice_settings(void); /* Read Voice Settings */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags); /* Write Voice Settings */ |
| |
| /* Host Controller to Host flow control */ |
| #define HCI_HOST_FLOW_CTRL_OFF 0 |
| #define HCI_HOST_FLOW_CTRL_ACL_ON 1 |
| #define HCI_HOST_FLOW_CTRL_SCO_ON 2 |
| #define HCI_HOST_FLOW_CTRL_BOTH_ON 3 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_set_host_flow_ctrl (UINT8 value); /* Enable/disable flow control toward host */ |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_auto_flush_tout(UINT16 handle); /* Read Retransmit Timout */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle, |
| UINT16 timeout); /* Write Retransmit Timout */ |
| |
| #define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4 |
| |
| #define HCI_FLUSH_TOUT_HANDLE_OFF 0 |
| #define HCI_FLUSH_TOUT_TOUT_OFF 2 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_num_bcast_xmit(void); /* Read Num Broadcast Retransmits */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_num_bcast_xmit(UINT8 num); /* Write Num Broadcast Retransmits */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_hold_mode_act(void); /* Read Hold Mode Activity */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_hold_mode_act(UINT8 flags); /* Write Hold Mode Activity */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type); /* Read Tx Power */ |
| |
| #define HCIC_PARAM_SIZE_READ_TX_POWER 3 |
| |
| #define HCI_READ_TX_POWER_HANDLE_OFF 0 |
| #define HCI_READ_TX_POWER_TYPE_OFF 2 |
| |
| /* Read transmit power level parameter */ |
| #define HCI_READ_CURRENT 0x00 |
| #define HCI_READ_MAXIMUM 0x01 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_sco_flow_enable(void); /* Read Authentication Enable */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_sco_flow_enable(UINT8 flag); /* Write Authentication Enable */ |
| |
| /* Set Host Buffer Size */ |
| HCI_API extern BOOLEAN btsnd_hcic_set_host_buf_size (UINT16 acl_len, |
| UINT8 sco_len, |
| UINT16 acl_num, |
| UINT16 sco_num); |
| |
| #define HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE 7 |
| |
| #define HCI_HOST_BUF_SIZE_ACL_LEN_OFF 0 |
| #define HCI_HOST_BUF_SIZE_SCO_LEN_OFF 2 |
| #define HCI_HOST_BUF_SIZE_ACL_NUM_OFF 3 |
| #define HCI_HOST_BUF_SIZE_SCO_NUM_OFF 5 |
| |
| |
| HCI_API extern BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles, |
| UINT16 *handle, |
| UINT16 *num_pkts); /* Set Host Buffer Size */ |
| |
| #define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t) |
| |
| #define MAX_DATA_HANDLES 10 |
| |
| #define HCI_PKTS_DONE_NUM_HANDLES_OFF 0 |
| #define HCI_PKTS_DONE_HANDLE_OFF 1 |
| #define HCI_PKTS_DONE_NUM_PKTS_OFF 3 |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_link_super_tout(UINT8 local_controller_id, UINT16 handle); /* Read Link Supervision Timeout */ |
| |
| /* Write Link Supervision Timeout */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout); |
| |
| #define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4 |
| |
| #define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0 |
| #define HCI_LINK_SUPER_TOUT_TOUT_OFF 2 |
| /* Write Link Supervision Timeout */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_max_iac (void); /* Read Num Supported IAC */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_cur_iac_lap (void); /* Read Current IAC LAP */ |
| |
| HCI_API extern BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac, |
| LAP * const iac_lap); /* Write Current IAC LAP */ |
| |
| #define MAX_IAC_LAPS 0x40 |
| |
| #define HCI_WRITE_IAC_LAP_NUM_OFF 0 |
| #define HCI_WRITE_IAC_LAP_LAP_OFF 1 |
| /* Write Current IAC LAP */ |
| |
| /* Read Clock */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_clock (UINT16 handle, UINT8 which_clock); |
| |
| #define HCIC_PARAM_SIZE_READ_CLOCK 3 |
| |
| #define HCI_READ_CLOCK_HANDLE_OFF 0 |
| #define HCI_READ_CLOCK_WHICH_CLOCK 2 |
| /* Read Clock */ |
| |
| #ifdef TESTER_ENABLE |
| |
| #define HCIC_PARAM_SIZE_ENTER_TEST_MODE 2 |
| |
| #define HCI_ENTER_TEST_HANDLE_OFF 0 |
| |
| #define HCIC_PARAM_SIZE_TEST_CNTRL 10 |
| #define HCI_TEST_CNTRL_HANDLE_OFF 0 |
| #define HCI_TEST_CNTRL_SCENARIO_OFF 2 |
| #define HCI_TEST_CNTRL_HOPPINGMODE_OFF 3 |
| #define HCI_TEST_CNTRL_TX_FREQ_OFF 4 |
| #define HCI_TEST_CNTRL_RX_FREQ_OFF 5 |
| #define HCI_TEST_CNTRL_PWR_CNTRL_MODE_OFF 6 |
| #define HCI_TEST_CNTRL_POLL_PERIOD_OFF 7 |
| #define HCI_TEST_CNTRL_PKT_TYPE_OFF 8 |
| #define HCI_TEST_CNTRL_LENGTH_OFF 9 |
| |
| #endif |
| |
| HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_per (void); /* Read Page Scan Period Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_per (UINT8 mode); /* Write Page Scan Period Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_mode (void); /* Read Page Scan Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_mode (UINT8 mode); /* Write Page Scan Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_local_ver (UINT8 local_controller_id); /* Read Local Version Info */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_local_supported_cmds (UINT8 local_controller_id); /* Read Local Supported Commands */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_local_features (void); /* Read Local Supported Features */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_buffer_size (void); /* Read Local buffer sizes */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_country_code (void); /* Read Country Code */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_bd_addr (void); /* Read Local BD_ADDR */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_fail_contact_count (UINT8 local_controller_id, UINT16 handle); /* Read Failed Contact Counter */ |
| HCI_API extern BOOLEAN btsnd_hcic_reset_fail_contact_count (UINT8 local_controller_id, UINT16 handle);/* Reset Failed Contact Counter */ |
| HCI_API extern BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle); /* Get Link Quality */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_rssi (UINT16 handle); /* Read RSSI */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_loopback_mode (void); /* Read Loopback Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_loopback_mode (UINT8 mode); /* Write Loopback Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_enable_test_mode (void); /* Enable Device Under Test Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type); /* Write Page Scan Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_type(void); /* Read Page Scan Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type); /* Write Inquiry Scan Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_type(void); /* Read Inquiry Scan Type */ |
| HCI_API extern BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type); /* Write Inquiry Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_read_inquiry_mode(void); /* Read Inquiry Mode */ |
| HCI_API extern BOOLEAN btsnd_hcic_set_afh_channels (UINT8 first, UINT8 last); |
| HCI_API extern BOOLEAN btsnd_hcic_write_afh_channel_assessment_mode (UINT8 mode); |
| HCI_API extern BOOLEAN btsnd_hcic_set_afh_host_channel_class (UINT8 *p_afhchannelmap); |
| HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_assessment_mode(void); |
| HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_map (UINT16 handle); |
| HCI_API extern BOOLEAN btsnd_hcic_nop(void); /* NOP */ |
| |
| /* Send HCI Data */ |
| HCI_API extern void btsnd_hcic_data (BT_HDR *p_buf, UINT16 len, UINT16 handle, UINT8 boundary, UINT8 broadcast); |
| |
| #define HCI_DATA_HANDLE_MASK 0x0FFF |
| |
| #define HCID_GET_HANDLE_EVENT(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 1) << 8))) |
| |
| #define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK) |
| |
| #define HCI_DATA_EVENT_MASK 3 |
| #define HCI_DATA_EVENT_OFFSET 12 |
| #define HCID_GET_EVENT(u16) (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK) |
| |
| #define HCI_DATA_BCAST_MASK 3 |
| #define HCI_DATA_BCAST_OFFSET 10 |
| #define HCID_GET_BCAST(u16) (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK) |
| |
| #define HCID_GET_ACL_LEN(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \ |
| (*((UINT8 *)((p) + 1) + p->offset + 3) << 8))) |
| |
| #define HCID_HEADER_SIZE 4 |
| /* Send HCI Data */ |
| |
| #define HCID_GET_SCO_LEN(p) (*((UINT8 *)((p) + 1) + p->offset + 2)) |
| |
| HCI_API extern void btsnd_hcic_vendor_spec_cmd ( |
| void *buffer, UINT16 opcode, |
| UINT8 len, UINT8 *p_data, |
| void *p_cmd_cplt_cback); |
| |
| |
| /********************************************************************************* |
| ** ** |
| ** H C I E V E N T S ** |
| ** ** |
| *********************************************************************************/ |
| |
| /* Inquiry Complete Event */ |
| HCI_API extern void btsnd_hcie_inq_comp(void *buffer, UINT8 status); |
| |
| #define HCIE_PARAM_SIZE_INQ_COMP 1 |
| |
| /* Inquiry Response Event */ |
| HCI_API extern void btsnd_hcie_inq_res(void *buffer, UINT8 num_resp, UINT8 **bd_addr, |
| UINT8 *page_scan_rep_mode, UINT8 *page_scan_per_mode, |
| UINT8 *page_scan_mode, UINT8 **dev_class, |
| UINT16 *clock_offset); |
| |
| /* Connection Complete Event */ |
| HCI_API extern void btsnd_hcie_connection_comp(void *buffer, UINT8 status, UINT16 handle, |
| BD_ADDR bd_addr, UINT8 link_type, UINT8 encr_mode); |
| |
| #define HCIE_PARAM_SIZE_CONNECTION_COMP 11 |
| |
| |
| #define HCI_LINK_TYPE_SCO 0x00 |
| #define HCI_LINK_TYPE_ACL 0x01 |
| |
| #define HCI_ENCRYPT_MODE_DISABLED 0x00 |
| #define HCI_ENCRYPT_MODE_POINT_TO_POINT 0x01 |
| #define HCI_ENCRYPT_MODE_ALL 0x02 |
| |
| |
| /* Connection Request Event */ |
| HCI_API extern void btsnd_hcie_connection_req(void *buffer, BD_ADDR bd_addr, DEV_CLASS dev_class, UINT8 link_type); |
| |
| #define HCIE_PARAM_SIZE_CONNECTION_REQ 10 |
| |
| #define HCI_LINK_TYPE_SCO 0x00 |
| #define HCI_LINK_TYPE_ACL 0x01 |
| |
| |
| /* Disonnection Complete Event */ |
| HCI_API extern void btsnd_hcie_disc_comp(void *buffer, UINT8 status, UINT16 handle, UINT8 reason); |
| |
| #define HCIE_PARAM_SIZE_DISC_COMP 4 |
| |
| |
| /* Authentication Complete Event */ |
| HCI_API extern void btsnd_hcie_auth_comp (void *buffer, UINT8 status, UINT16 handle); |
| |
| #define HCIE_PARAM_SIZE_AUTH_COMP 3 |
| |
| |
| /* Remote Name Request Complete Event */ |
| HCI_API extern void btsnd_hcie_rmt_name_req_comp(void *buffer, UINT8 status, BD_ADDR bd_addr, BD_NAME name); |
| |
| #define HCIE_PARAM_SIZE_RMT_NAME_REQ_COMP (1 + BD_ADDR_LEN + BD_NAME_LEN) |
| |
| |
| /* Encryption Change Event */ |
| HCI_API extern void btsnd_hcie_encryption_change (void *buffer, UINT8 status, UINT16 handle, BOOLEAN enable); |
| |
| #define HCIE_PARAM_SIZE_ENCR_CHANGE 4 |
| |
| |
| /* Connection Link Key Change Event */ |
| HCI_API extern void btsnd_hcie_conn_link_key_change (void *buffer, UINT8 status, UINT16 handle); |
| |
| #define HCIE_PARAM_SIZE_LINK_KEY_CHANGE 3 |
| |
| |
| /* Encryption Key Refresh Complete Event */ |
| HCI_API extern void btsnd_hcie_encrypt_key_refresh (void *buffer, UINT8 status, UINT16 handle); |
| |
| #define HCIE_PARAM_SIZE_ENCRYPT_KEY_REFRESH 3 |
| |
| |
| /* Master Link Key Complete Event */ |
| HCI_API extern void btsnd_hcie_master_link_key (void *buffer, UINT8 status, UINT16 handle, UINT8 flag); |
| |
| #define HCIE_PARAM_SIZE_MASTER_LINK_KEY 4 |
| |
| |
| /* Read Remote Supported Features Complete Event */ |
| HCI_API extern void btsnd_hcie_read_rmt_features (void *buffer, UINT8 status, UINT16 handle, UINT8 *features); |
| |
| #define LMP_FEATURES_SIZE 8 |
| #define HCIE_PARAM_SIZE_READ_RMT_FEATURES 11 |
| |
| |
| /* Read Remote Extended Features Complete Event */ |
| HCI_API extern void btsnd_hcie_read_rmt_ext_features (void *buffer, UINT8 status, UINT16 handle, UINT8 page_num, |
| UINT8 max_page_num, UINT8 *features); |
| |
| #define EXT_LMP_FEATURES_SIZE 8 |
| #define HCIE_PARAM_SIZE_READ_RMT_EXT_FEATURES 13 |
| |
| |
| /* Read Remote Version Complete Event */ |
| HCI_API extern void btsnd_hcie_read_rmt_version (void *buffer, UINT8 status, UINT16 handle, UINT8 version, |
| UINT16 comp_name, UINT16 sub_version); |
| |
| #define HCIE_PARAM_SIZE_READ_RMT_VERSION 8 |
| |
| |
| /* QOS setup complete */ |
| HCI_API extern void btsnd_hcie_qos_setup_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags, |
| UINT8 service_type, UINT32 token_rate, UINT32 peak, |
| UINT32 latency, UINT32 delay_var); |
| |
| #define HCIE_PARAM_SIZE_QOS_SETUP_COMP 21 |
| |
| |
| /* Flow Specification complete */ |
| HCI_API extern void btsnd_hcie_flow_spec_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags, |
| UINT8 flow_direction, UINT8 service_type, UINT32 token_rate, UINT32 token_bucket_size, |
| UINT32 peak, UINT32 latency); |
| |
| #define HCIE_PARAM_SIZE_FLOW_SPEC_COMP 22 |
| |
| |
| /* Command Complete Event */ |
| HCI_API extern void btsnd_hcie_cmd_comp(void *buffer, UINT8 max_host_cmds, UINT16 opcode, UINT8 status); |
| |
| #define HCIE_PARAM_SIZE_CMD_COMP 4 |
| |
| |
| /* Command Complete with pre-filled in parameters */ |
| HCI_API extern void btsnd_hcie_cmd_comp_params (void *buffer, UINT8 max_host_cmds, UINT16 cmd_opcode, UINT8 status); |
| |
| #define HCI_CMD_COMPL_PARAM_OFFSET 4 |
| |
| |
| /* Command Complete Event with 1-byte param */ |
| HCI_API extern void btsnd_hcie_cmd_comp_param1(void *buffer, UINT8 max_host_cmds, UINT16 opcode, |
| UINT8 status, UINT8 param1); |
| |
| #define HCIE_PARAM_SIZE_CMD_COMP_PARAM1 5 |
| |
| /* Command Complete Event with 2-byte param */ |
| HCI_API extern void btsnd_hcie_cmd_comp_param2(void *buffer, UINT8 max_host_cmds, UINT16 opcode, |
| UINT8 status, UINT16 param2); |
| |
| #define HCIE_PARAM_SIZE_CMD_COMP_PARAM2 6 |
| |
| |
| /* Command Complete Event with BD-addr as param */ |
| HCI_API extern void btsnd_hcie_cmd_comp_bd_addr(void *buffer, UINT8 max_host_cmds, UINT16 opcode, |
| UINT8 status, BD_ADDR bd_addr); |
| |
| #define HCIE_PARAM_SIZE_CMD_COMP_BD_ADDR 10 |
| |
| |
| /* Command Pending Event */ |
| HCI_API extern void btsnd_hcie_cmd_status (void *buffer, UINT8 status, UINT8 max_host_cmds, UINT16 opcode); |
| |
| #define HCIE_PARAM_SIZE_CMD_STATUS 4 |
| |
| |
| /* HW failure Event */ |
| HCI_API extern void btsnd_hcie_hw_failure (void *buffer, UINT8 code); |
| |
| #define HCIE_PARAM_SIZE_HW_FAILURE 1 |
| |
| |
| /* Flush Occured Event */ |
| HCI_API extern void btsnd_hcie_flush_occured (void *buffer, UINT16 handle); |
| |
| #define HCIE_PARAM_SIZE_FLUSH_OCCURED 2 |
| |
| |
| /* Role Changed Event */ |
| HCI_API extern void btsnd_hcie_role_change (void *buffer, UINT8 status, BD_ADDR bd_addr, UINT8 role); |
| |
| #define HCIE_PARAM_SIZE_ROLE_CHANGE 8 |
| |
| |
| /* Ready for Data Packets Event */ |
| HCI_API extern void btsnd_hcie_num_compl_pkts (void *buffer, UINT8 num_handles, UINT16 *p_handle, UINT16 *num_pkts); |
| |
| #define MAX_DATA_HANDLES 10 |
| |
| |
| /* Mode Change Event */ |
| HCI_API extern void btsnd_hcie_mode_change (void *buffer, UINT8 status, UINT16 handle, |
| UINT8 mode, UINT16 interval); |
| |
| #define HCIE_PARAM_SIZE_MODE_CHANGE 6 |
| #define MAX_DATA_HANDLES 10 |
| |
| |
| |
| /* Return Link Keys Event */ |
| HCI_API extern void btsnd_hcie_return_link_keys (void *buffer, UINT8 num_keys, BD_ADDR *bd_addr, LINK_KEY *link_key); |
| |
| /* This should not be more than 0x0b */ |
| #define MAX_LINK_KEYS 10 |
| |
| |
| |
| /* PIN Code Request Event */ |
| HCI_API extern void btsnd_hcie_pin_code_req (void *buffer, BD_ADDR bd_addr); |
| |
| #define HCIE_PARAM_SIZE_PIN_CODE_REQ 6 |
| |
| |
| |
| /* Link Key Request Event */ |
| HCI_API extern void btsnd_hcie_link_key_req (void *buffer, BD_ADDR bd_addr); |
| |
| #define HCIE_PARAM_SIZE_LINK_KEY_REQ 6 |
| |
| |
| |
| /* Link Key Notification Event */ |
| HCI_API extern void btsnd_hcie_link_key_notify (void *buffer, BD_ADDR bd_addr, LINK_KEY link_key, UINT8 key_type); |
| |
| #define HCIE_PARAM_SIZE_LINK_KEY_NOTIFY 23 |
| |
| |
| |
| /* Loopback Command Event */ |
| HCI_API extern void btsnd_hcie_loopback_command (void *buffer, UINT8 data_len, UINT8 *data); |
| |
| #define HCIE_PARAM_SIZE_LOOPBACK_COMMAND sizeof(btmsg_hcie_loopback_cmd_t) |
| |
| |
| |
| /* Data Buffer Overflow Event */ |
| HCI_API extern void btsnd_hcie_data_buf_overflow (void *buffer, UINT8 link_type); |
| |
| #define HCIE_PARAM_SIZE_DATA_BUF_OVERFLOW 1 |
| |
| |
| |
| /* Max Slots Change Event */ |
| HCI_API extern void btsnd_hcie_max_slots_change(void *buffer, UINT16 handle, UINT8 max_slots); |
| |
| #define HCIE_PARAM_SIZE_MAX_SLOTS_CHANGE 3 |
| |
| |
| /* Read Clock Offset Complet Event */ |
| HCI_API extern void btsnd_hcie_read_clock_off_comp(void *buffer, UINT8 status, UINT16 handle, |
| UINT16 clock_offset); |
| |
| #define HCIE_PARAM_SIZE_READ_CLOCK_OFF_COMP 5 |
| |
| |
| |
| /* Connection Packet Type Change Event */ |
| HCI_API extern void btsnd_hcie_pkt_type_change (void *buffer, UINT8 status, UINT16 handle, UINT16 pkt_type); |
| |
| #define HCIE_PARAM_SIZE_PKT_TYPE_CHANGE 5 |
| |
| |
| |
| /* QOS violation Event */ |
| HCI_API extern void btsnd_hcie_qos_violation (void *buffer, UINT16 handle); |
| |
| #define HCIE_PARAM_SIZE_QOS_VIOLATION 2 |
| |
| |
| |
| /* Page Scan Mode Change Event */ |
| HCI_API extern void btsnd_hcie_pagescan_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode); |
| |
| #define HCIE_PARAM_SIZE_PAGE_SCAN_MODE_CHNG 7 |
| |
| |
| /* Page Scan Repetition Mode Change Event */ |
| HCI_API extern void btsnd_hcie_pagescan_rep_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode); |
| |
| #define HCIE_PARAM_SIZE_PAGE_SCAN_REP_MODE_CHNG 7 |
| |
| |
| /* Sniff Sub Rate Event */ |
| HCI_API extern void btsnd_hcie_sniff_sub_rate(void *buffer, UINT8 status, UINT16 handle, UINT16 max_tx_lat, UINT16 max_rx_lat, |
| UINT16 min_remote_timeout, UINT16 min_local_timeout); |
| |
| #define HCIE_PARAM_SIZE_SNIFF_SUB_RATE 11 |
| |
| |
| |
| /* Extended Inquiry Result Event */ |
| HCI_API extern void btsnd_hcie_ext_inquiry_result(void *buffer, UINT8 num_resp, UINT8 **bd_addr, |
| UINT8 *page_scan_rep_mode, UINT8 *reserved, |
| UINT8 **dev_class, UINT16 *clock_offset, UINT8 *rssi, UINT8 *p_data); |
| |
| |
| #if (BLE_INCLUDED == TRUE) |
| /******************************************************************************** |
| ** BLE Commands |
| ** Note: "local_controller_id" is for transport, not counted in HCI message size |
| *********************************************************************************/ |
| #define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8 |
| #define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6 |
| #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15 |
| #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31 |
| #define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1 |
| #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7 |
| #define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2 |
| #define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25 |
| #define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0 |
| #define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0 |
| #define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7 |
| #define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7 |
| #define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14 |
| #define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5 |
| #define HCIC_PARAM_SIZE_READ_CHNL_MAP 2 |
| #define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2 |
| #define HCIC_PARAM_SIZE_BLE_ENCRYPT 32 |
| #define HCIC_PARAM_SIZE_BLE_RAND 0 |
| #define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2 |
| |
| #define HCIC_BLE_RAND_DI_SIZE 8 |
| #define HCIC_BLE_ENCRYT_KEY_SIZE 16 |
| #define HCIC_PARAM_SIZE_BLE_START_ENC (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE) |
| #define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE) |
| #define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2 |
| #define HCIC_BLE_CHNL_MAP_SIZE 5 |
| #define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31 |
| |
| /* ULP HCI command */ |
| HCI_API extern BOOLEAN btsnd_hcic_ble_reset(void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_buffer_size (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max, |
| UINT8 adv_type, UINT8 addr_type_own, |
| UINT8 addr_type_dir, BD_ADDR direct_bda, |
| UINT8 channel_map, UINT8 adv_filter_policy); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type, |
| UINT16 scan_int, UINT16 scan_win, |
| UINT8 addr_type, UINT8 scan_filter_policy); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win, |
| UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own, |
| UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout, |
| UINT16 min_ce_len, UINT16 max_ce_len); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_create_conn_cancel (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_white_list_size (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_clear_white_list (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max, |
| UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_encrypt (UINT8* key, UINT8 key_len, UINT8* plain_text, UINT8 pt_len, void *p_cmd_cplt_cback); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle, |
| UINT8 rand[HCIC_BLE_RAND_DI_SIZE], |
| UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_supported_states (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_write_host_supported (UINT8 le_host_spt, UINT8 simul_le_host_spt); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_read_host_supported (void); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_receiver_test(UINT8 rx_freq); |
| |
| HCI_API extern BOOLEAN btsnd_hcic_ble_transmitter_test(UINT8 tx_freq, UINT8 test_data_len, |
| UINT8 payload); |
| HCI_API extern BOOLEAN btsnd_hcic_ble_test_end(void); |
| |
| #endif /* BLE_INCLUDED */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
| |
