| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * this file contains the PORT API definitions |
| * |
| ******************************************************************************/ |
| #ifndef PORT_API_H |
| #define PORT_API_H |
| |
| #include "bt_target.h" |
| |
| /***************************************************************************** |
| ** Constants and Types |
| *****************************************************************************/ |
| |
| /* |
| ** Define port settings structure send from the application in the |
| ** set settings request, or to the application in the set settings indication. |
| */ |
| typedef struct |
| { |
| |
| #define PORT_BAUD_RATE_2400 0x00 |
| #define PORT_BAUD_RATE_4800 0x01 |
| #define PORT_BAUD_RATE_7200 0x02 |
| #define PORT_BAUD_RATE_9600 0x03 |
| #define PORT_BAUD_RATE_19200 0x04 |
| #define PORT_BAUD_RATE_38400 0x05 |
| #define PORT_BAUD_RATE_57600 0x06 |
| #define PORT_BAUD_RATE_115200 0x07 |
| #define PORT_BAUD_RATE_230400 0x08 |
| |
| UINT8 baud_rate; |
| |
| #define PORT_5_BITS 0x00 |
| #define PORT_6_BITS 0x01 |
| #define PORT_7_BITS 0x02 |
| #define PORT_8_BITS 0x03 |
| |
| UINT8 byte_size; |
| |
| #define PORT_ONESTOPBIT 0x00 |
| #define PORT_ONE5STOPBITS 0x01 |
| UINT8 stop_bits; |
| |
| #define PORT_PARITY_NO 0x00 |
| #define PORT_PARITY_YES 0x01 |
| UINT8 parity; |
| |
| #define PORT_ODD_PARITY 0x00 |
| #define PORT_EVEN_PARITY 0x01 |
| #define PORT_MARK_PARITY 0x02 |
| #define PORT_SPACE_PARITY 0x03 |
| |
| UINT8 parity_type; |
| |
| #define PORT_FC_OFF 0x00 |
| #define PORT_FC_XONXOFF_ON_INPUT 0x01 |
| #define PORT_FC_XONXOFF_ON_OUTPUT 0x02 |
| #define PORT_FC_CTS_ON_INPUT 0x04 |
| #define PORT_FC_CTS_ON_OUTPUT 0x08 |
| #define PORT_FC_DSR_ON_INPUT 0x10 |
| #define PORT_FC_DSR_ON_OUTPUT 0x20 |
| |
| UINT8 fc_type; |
| |
| UINT8 rx_char1; |
| |
| #define PORT_XON_DC1 0x11 |
| UINT8 xon_char; |
| |
| #define PORT_XOFF_DC3 0x13 |
| UINT8 xoff_char; |
| |
| } tPORT_STATE; |
| |
| |
| /* |
| ** Define the callback function prototypes. Parameters are specific |
| ** to each event and are described bellow |
| */ |
| typedef int (tPORT_DATA_CALLBACK) (UINT16 port_handle, void *p_data, UINT16 len); |
| |
| #define DATA_CO_CALLBACK_TYPE_INCOMING 1 |
| #define DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE 2 |
| #define DATA_CO_CALLBACK_TYPE_OUTGOING 3 |
| typedef int (tPORT_DATA_CO_CALLBACK) (UINT16 port_handle, UINT8* p_buf, UINT16 len, int type); |
| |
| typedef void (tPORT_CALLBACK) (UINT32 code, UINT16 port_handle); |
| |
| /* |
| ** Define events that registered application can receive in the callback |
| */ |
| |
| #define PORT_EV_RXCHAR 0x00000001 /* Any Character received */ |
| #define PORT_EV_RXFLAG 0x00000002 /* Received certain character */ |
| #define PORT_EV_TXEMPTY 0x00000004 /* Transmitt Queue Empty */ |
| #define PORT_EV_CTS 0x00000008 /* CTS changed state */ |
| #define PORT_EV_DSR 0x00000010 /* DSR changed state */ |
| #define PORT_EV_RLSD 0x00000020 /* RLSD changed state */ |
| #define PORT_EV_BREAK 0x00000040 /* BREAK received */ |
| #define PORT_EV_ERR 0x00000080 /* Line status error occurred */ |
| #define PORT_EV_RING 0x00000100 /* Ring signal detected */ |
| #define PORT_EV_CTSS 0x00000400 /* CTS state */ |
| #define PORT_EV_DSRS 0x00000800 /* DSR state */ |
| #define PORT_EV_RLSDS 0x00001000 /* RLSD state */ |
| #define PORT_EV_OVERRUN 0x00002000 /* receiver buffer overrun */ |
| #define PORT_EV_TXCHAR 0x00004000 /* Any character transmitted */ |
| |
| #define PORT_EV_CONNECTED 0x00000200 /* RFCOMM connection established */ |
| #define PORT_EV_CONNECT_ERR 0x00008000 /* Was not able to establish connection */ |
| /* or disconnected */ |
| #define PORT_EV_FC 0x00010000 /* data flow enabled flag changed by remote */ |
| #define PORT_EV_FCS 0x00020000 /* data flow enable status true = enabled */ |
| |
| /* |
| ** To register for events application should provide bitmask with |
| ** corresponding bit set |
| */ |
| |
| #define PORT_MASK_ALL (PORT_EV_RXCHAR | PORT_EV_TXEMPTY | PORT_EV_CTS | \ |
| PORT_EV_DSR | PORT_EV_RLSD | PORT_EV_BREAK | \ |
| PORT_EV_ERR | PORT_EV_RING | PORT_EV_CONNECT_ERR | \ |
| PORT_EV_DSRS | PORT_EV_CTSS | PORT_EV_RLSDS | \ |
| PORT_EV_RXFLAG | PORT_EV_TXCHAR | PORT_EV_OVERRUN | \ |
| PORT_EV_FC | PORT_EV_FCS | PORT_EV_CONNECTED) |
| |
| |
| /* |
| ** Define port result codes |
| */ |
| #define PORT_SUCCESS 0 |
| |
| #define PORT_ERR_BASE 0 |
| |
| #define PORT_UNKNOWN_ERROR (PORT_ERR_BASE + 1) |
| #define PORT_ALREADY_OPENED (PORT_ERR_BASE + 2) |
| #define PORT_CMD_PENDING (PORT_ERR_BASE + 3) |
| #define PORT_APP_NOT_REGISTERED (PORT_ERR_BASE + 4) |
| #define PORT_NO_MEM (PORT_ERR_BASE + 5) |
| #define PORT_NO_RESOURCES (PORT_ERR_BASE + 6) |
| #define PORT_BAD_BD_ADDR (PORT_ERR_BASE + 7) |
| #define PORT_BAD_HANDLE (PORT_ERR_BASE + 9) |
| #define PORT_NOT_OPENED (PORT_ERR_BASE + 10) |
| #define PORT_LINE_ERR (PORT_ERR_BASE + 11) |
| #define PORT_START_FAILED (PORT_ERR_BASE + 12) |
| #define PORT_PAR_NEG_FAILED (PORT_ERR_BASE + 13) |
| #define PORT_PORT_NEG_FAILED (PORT_ERR_BASE + 14) |
| #define PORT_SEC_FAILED (PORT_ERR_BASE + 15) |
| #define PORT_PEER_CONNECTION_FAILED (PORT_ERR_BASE + 16) |
| #define PORT_PEER_FAILED (PORT_ERR_BASE + 17) |
| #define PORT_PEER_TIMEOUT (PORT_ERR_BASE + 18) |
| #define PORT_CLOSED (PORT_ERR_BASE + 19) |
| #define PORT_TX_FULL (PORT_ERR_BASE + 20) |
| #define PORT_LOCAL_CLOSED (PORT_ERR_BASE + 21) |
| #define PORT_LOCAL_TIMEOUT (PORT_ERR_BASE + 22) |
| #define PORT_TX_QUEUE_DISABLED (PORT_ERR_BASE + 23) |
| #define PORT_PAGE_TIMEOUT (PORT_ERR_BASE + 24) |
| #define PORT_INVALID_SCN (PORT_ERR_BASE + 25) |
| |
| |
| /***************************************************************************** |
| ** External Function Declarations |
| *****************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /******************************************************************************* |
| ** |
| ** Function RFCOMM_CreateConnection |
| ** |
| ** Description RFCOMM_CreateConnection function is used from the application |
| ** to establish serial port connection to the peer device, |
| ** or allow RFCOMM to accept a connection from the peer |
| ** application. |
| ** |
| ** Parameters: scn - Service Channel Number as registered with |
| ** the SDP (server) or obtained using SDP from |
| ** the peer device (client). |
| ** is_server - TRUE if requesting application is a server |
| ** mtu - Maximum frame size the application can accept |
| ** bd_addr - BD_ADDR of the peer (client) |
| ** mask - specifies events to be enabled. A value |
| ** of zero disables all events. |
| ** p_handle - OUT pointer to the handle. |
| ** p_mgmt_cb - pointer to callback function to receive |
| ** connection up/down events. |
| ** Notes: |
| ** |
| ** Server can call this function with the same scn parameter multiple times if |
| ** it is ready to accept multiple simulteneous connections. |
| ** |
| ** DLCI for the connection is (scn * 2 + 1) if client originates connection on |
| ** existing none initiator multiplexer channel. Otherwise it is (scn * 2). |
| ** For the server DLCI can be changed later if client will be calling it using |
| ** (scn * 2 + 1) dlci. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int RFCOMM_CreateConnection (UINT16 uuid, UINT8 scn, |
| BOOLEAN is_server, UINT16 mtu, |
| BD_ADDR bd_addr, UINT16 *p_handle, |
| tPORT_CALLBACK *p_mgmt_cb); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function RFCOMM_RemoveConnection |
| ** |
| ** Description This function is called to close the specified connection. |
| ** |
| ** Parameters: handle - Handle of the port returned in the Open |
| ** |
| *******************************************************************************/ |
| RFC_API extern int RFCOMM_RemoveConnection (UINT16 handle); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function RFCOMM_RemoveServer |
| ** |
| ** Description This function is called to close the server port. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** |
| *******************************************************************************/ |
| RFC_API extern int RFCOMM_RemoveServer (UINT16 handle); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_SetEventCallback |
| ** |
| ** Description Set event callback the specified connection. |
| ** |
| ** Parameters: handle - Handle of the port returned in the Open |
| ** p_callback - address of the callback function which should |
| ** be called from the RFCOMM when an event |
| ** specified in the mask occurs. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_SetEventCallback (UINT16 port_handle, |
| tPORT_CALLBACK *p_port_cb); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_SetEventCallback |
| ** |
| ** Description Set event data callback the specified connection. |
| ** |
| ** Parameters: handle - Handle of the port returned in the Open |
| ** p_callback - address of the callback function which should |
| ** be called from the RFCOMM when a data |
| ** packet is received. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_SetDataCallback (UINT16 port_handle, |
| tPORT_DATA_CALLBACK *p_cb); |
| |
| RFC_API extern int PORT_SetDataCOCallback (UINT16 port_handle, tPORT_DATA_CO_CALLBACK *p_port_cb); |
| /******************************************************************************* |
| ** |
| ** Function PORT_SetEventMask |
| ** |
| ** Description This function is called to close the specified connection. |
| ** |
| ** Parameters: handle - Handle of the port returned in the Open |
| ** mask - specifies events to be enabled. A value |
| ** of zero disables all events. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_SetEventMask (UINT16 port_handle, UINT32 mask); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_CheckConnection |
| ** |
| ** Description This function returns PORT_SUCCESS if connection referenced |
| ** by handle is up and running |
| ** |
| ** Parameters: handle - Handle of the port returned in the Open |
| ** bd_addr - OUT bd_addr of the peer |
| ** p_lcid - OUT L2CAP's LCID |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_CheckConnection (UINT16 handle, BD_ADDR bd_addr, |
| UINT16 *p_lcid); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_IsOpening |
| ** |
| ** Description This function returns TRUE if there is any RFCOMM connection |
| ** opening in process. |
| ** |
| ** Parameters: TRUE if any connection opening is found |
| ** bd_addr - bd_addr of the peer |
| ** |
| *******************************************************************************/ |
| RFC_API extern BOOLEAN PORT_IsOpening (BD_ADDR bd_addr); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_SetState |
| ** |
| ** Description This function configures connection according to the |
| ** specifications in the tPORT_STATE structure. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_settings - Pointer to a tPORT_STATE structure containing |
| ** configuration information for the connection. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_SetState (UINT16 handle, tPORT_STATE *p_settings); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_GetRxQueueCnt |
| ** |
| ** Description This function return number of buffers on the rx queue. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_rx_queue_count - Pointer to return queue count in. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_GetRxQueueCnt (UINT16 handle, UINT16 *p_rx_queue_count); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_GetState |
| ** |
| ** Description This function is called to fill tPORT_STATE structure |
| ** with the current control settings for the port |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_settings - Pointer to a tPORT_STATE structure in which |
| ** configuration information is returned. |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_GetState (UINT16 handle, tPORT_STATE *p_settings); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_Control |
| ** |
| ** Description This function directs a specified connection to pass control |
| ** control information to the peer device. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** signal - specify the function to be passed |
| ** |
| *******************************************************************************/ |
| #define PORT_SET_DTRDSR 0x01 |
| #define PORT_CLR_DTRDSR 0x02 |
| #define PORT_SET_CTSRTS 0x03 |
| #define PORT_CLR_CTSRTS 0x04 |
| #define PORT_SET_RI 0x05 /* DCE only */ |
| #define PORT_CLR_RI 0x06 /* DCE only */ |
| #define PORT_SET_DCD 0x07 /* DCE only */ |
| #define PORT_CLR_DCD 0x08 /* DCE only */ |
| #define PORT_BREAK 0x09 /* Break event */ |
| |
| RFC_API extern int PORT_Control (UINT16 handle, UINT8 signal); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_FlowControl |
| ** |
| ** Description This function directs a specified connection to pass |
| ** flow control message to the peer device. Enable flag passed |
| ** shows if port can accept more data. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** enable - enables data flow |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_FlowControl (UINT16 handle, BOOLEAN enable); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_GetModemStatus |
| ** |
| ** Description This function retrieves modem control signals. Normally |
| ** application will call this function after a callback |
| ** function is called with notification that one of signals |
| ** has been changed. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** callback. |
| ** p_signal - specify the pointer to control signals info |
| ** |
| *******************************************************************************/ |
| #define PORT_DTRDSR_ON 0x01 |
| #define PORT_CTSRTS_ON 0x02 |
| #define PORT_RING_ON 0x04 |
| #define PORT_DCD_ON 0x08 |
| |
| /* |
| ** Define default initial local modem signals state set after connection established |
| */ |
| #define PORT_OBEX_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) |
| #define PORT_SPP_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) |
| #define PORT_PPP_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON) |
| #define PORT_DUN_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON) |
| |
| RFC_API extern int PORT_GetModemStatus (UINT16 handle, UINT8 *p_control_signal); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ClearError |
| ** |
| ** Description This function retreives information about a communications |
| ** error and reports current status of a connection. The |
| ** function should be called when an error occures to clear |
| ** the connection error flag and to enable additional read |
| ** and write operations. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_errors - pointer of the variable to receive error codes |
| ** p_status - pointer to the tPORT_STATUS structur to receive |
| ** connection status |
| ** |
| *******************************************************************************/ |
| |
| #define PORT_ERR_BREAK 0x01 /* Break condition occured on the peer device */ |
| #define PORT_ERR_OVERRUN 0x02 /* Overrun is reported by peer device */ |
| #define PORT_ERR_FRAME 0x04 /* Framing error reported by peer device */ |
| #define PORT_ERR_RXOVER 0x08 /* Input queue overflow occured */ |
| #define PORT_ERR_TXFULL 0x10 /* Output queue overflow occured */ |
| |
| typedef struct |
| { |
| #define PORT_FLAG_CTS_HOLD 0x01 /* Tx is waiting for CTS signal */ |
| #define PORT_FLAG_DSR_HOLD 0x02 /* Tx is waiting for DSR signal */ |
| #define PORT_FLAG_RLSD_HOLD 0x04 /* Tx is waiting for RLSD signal */ |
| |
| UINT16 flags; |
| UINT16 in_queue_size; /* Number of bytes in the input queue */ |
| UINT16 out_queue_size; /* Number of bytes in the output queue */ |
| UINT16 mtu_size; /* peer MTU size */ |
| } tPORT_STATUS; |
| |
| |
| RFC_API extern int PORT_ClearError (UINT16 handle, UINT16 *p_errors, |
| tPORT_STATUS *p_status); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_SendError |
| ** |
| ** Description This function send a communications error to the peer device |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** errors - receive error codes |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_SendError (UINT16 handle, UINT8 errors); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_GetQueueStatus |
| ** |
| ** Description This function reports current status of a connection. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_status - pointer to the tPORT_STATUS structur to receive |
| ** connection status |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_GetQueueStatus (UINT16 handle, tPORT_STATUS *p_status); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_Purge |
| ** |
| ** Description This function discards all the data from the output or |
| ** input queues of the specified connection. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** purge_flags - specify the action to take. |
| ** |
| *******************************************************************************/ |
| #define PORT_PURGE_TXCLEAR 0x01 |
| #define PORT_PURGE_RXCLEAR 0x02 |
| |
| RFC_API extern int PORT_Purge (UINT16 handle, UINT8 purge_flags); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_Read |
| ** |
| ** Description This function returns the pointer to the buffer received |
| ** from the peer device. Normally application will call this |
| ** function after receiving PORT_EVT_RXCHAR event. |
| ** Application calling this function is responsible to free |
| ** buffer returned. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** callback. |
| ** pp_buf - pointer to address of buffer with data, |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_Read (UINT16 handle, BT_HDR **pp_buf); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_ReadData |
| ** |
| ** Description Normally application will call this function after receiving |
| ** PORT_EVT_RXCHAR event. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** callback. |
| ** p_data - Data area |
| ** max_len - Byte count requested |
| ** p_len - Byte count received |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_ReadData (UINT16 handle, char *p_data, UINT16 max_len, |
| UINT16 *p_len); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_Write |
| ** |
| ** Description This function to send BT buffer to the peer device. |
| ** Application should not free the buffer. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_buf - pointer to the buffer with data, |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_Write (UINT16 handle, BT_HDR *p_buf); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_WriteData |
| ** |
| ** Description This function is called from the legacy application to |
| ** send data. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_data - Data area |
| ** max_len - Byte count to write |
| ** p_len - Bytes written |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_WriteData (UINT16 handle, char *p_data, UINT16 max_len, |
| UINT16 *p_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_WriteDataCO |
| ** |
| ** Description Normally not GKI aware application will call this function |
| ** to send data to the port by callout functions. |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_WriteDataCO (UINT16 handle, int* p_len); |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_Test |
| ** |
| ** Description Application can call this function to send RFCOMM Test frame |
| ** |
| ** Parameters: handle - Handle returned in the RFCOMM_CreateConnection |
| ** p_data - Data area |
| ** max_len - Byte count requested |
| ** |
| *******************************************************************************/ |
| RFC_API extern int PORT_Test (UINT16 handle, UINT8 *p_data, UINT16 len); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function RFCOMM_Init |
| ** |
| ** Description This function is called to initialize RFCOMM layer |
| ** |
| *******************************************************************************/ |
| RFC_API extern void RFCOMM_Init (void); |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function PORT_SetTraceLevel |
| ** |
| ** Description This function sets the trace level for RFCOMM. If called with |
| ** a value of 0xFF, it simply reads the current trace level. |
| ** |
| ** Returns the new (current) trace level |
| ** |
| *******************************************************************************/ |
| RFC_API extern UINT8 PORT_SetTraceLevel (UINT8 new_level); |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* PORT_API_H */ |
