| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file implements utility functions for the HeaLth device profile |
| * (HL). |
| * |
| ******************************************************************************/ |
| |
| #include <stdio.h> |
| #include <string.h> |
| |
| #include "bt_target.h" |
| #if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE) |
| |
| |
| #include "gki.h" |
| #include "utl.h" |
| #include "bd.h" |
| #include "bta_fs_api.h" |
| #include "bta_hl_int.h" |
| #include "bta_hl_co.h" |
| #include "mca_defs.h" |
| #include "mca_api.h" |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_ctrl_psm_for_dch |
| ** |
| ** Description This function set the control PSM for the DCH setup |
| ** |
| ** Returns BOOLEAN - TRUE - control PSM setting is successful |
| *******************************************************************************/ |
| BOOLEAN bta_hl_set_ctrl_psm_for_dch(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 mdl_idx, UINT16 ctrl_psm) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN success = TRUE, update_ctrl_psm = FALSE; |
| |
| if (p_mcb->sdp.num_recs) |
| { |
| if (p_mcb->ctrl_psm != ctrl_psm) |
| { |
| /* can not use a different ctrl PSM than the current one*/ |
| success = FALSE; |
| } |
| } |
| else |
| { |
| /* No SDP info control i.e. channel was opened by the peer */ |
| update_ctrl_psm = TRUE; |
| } |
| |
| if (success && update_ctrl_psm) |
| { |
| p_mcb->ctrl_psm = ctrl_psm; |
| } |
| |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!success) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_set_ctrl_psm_for_dch num_recs=%d success=%d update_ctrl_psm=%d ctrl_psm=0x%x ", |
| p_mcb->sdp.num_recs, success, update_ctrl_psm, ctrl_psm ); |
| } |
| #endif |
| |
| return success; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_sdp_idx_using_ctrl_psm |
| ** |
| ** Description |
| ** |
| ** Returns UINT8 pool_id |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_sdp_idx_using_ctrl_psm(tBTA_HL_SDP *p_sdp, |
| UINT16 ctrl_psm, |
| UINT8 *p_sdp_idx) |
| { |
| BOOLEAN found=FALSE; |
| tBTA_HL_SDP_REC *p_rec; |
| UINT8 i; |
| |
| if (ctrl_psm != 0) |
| { |
| for (i=0; i<p_sdp->num_recs; i++) |
| { |
| p_rec = &p_sdp->sdp_rec[i]; |
| if (p_rec->ctrl_psm == ctrl_psm) |
| { |
| *p_sdp_idx = i; |
| found = TRUE; |
| break; |
| } |
| } |
| } |
| else |
| { |
| *p_sdp_idx = 0; |
| found = TRUE; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_sdp_idx_using_ctrl_psm found=%d sdp_idx=%d ctrl_psm=0x%x ", |
| found, *p_sdp_idx, ctrl_psm ); |
| } |
| #endif |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_user_tx_pool_id |
| ** |
| ** Description This function sets the user tx pool id |
| ** |
| ** Returns UINT8 pool_id |
| ** |
| *******************************************************************************/ |
| |
| UINT8 bta_hl_set_user_tx_pool_id(UINT16 max_tx_size) |
| { |
| UINT8 pool_id; |
| |
| if (max_tx_size > GKI_get_pool_bufsize (OBX_FCR_TX_POOL_ID)) |
| { |
| pool_id = BTA_HL_LRG_DATA_POOL_ID; |
| } |
| else |
| { |
| pool_id = L2CAP_DEFAULT_ERM_POOL_ID; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG3("bta_hl_set_user_rx_pool_id pool_id=%d max_tx_size=%d default_ertm_pool_size=%d", |
| pool_id, max_tx_size, GKI_get_pool_bufsize (OBX_FCR_TX_POOL_ID)); |
| #endif |
| |
| return pool_id; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_user_rx_pool_id |
| ** |
| ** Description This function sets the user trx pool id |
| ** |
| ** Returns UINT8 pool_id |
| ** |
| *******************************************************************************/ |
| |
| UINT8 bta_hl_set_user_rx_pool_id(UINT16 mtu) |
| { |
| UINT8 pool_id; |
| |
| if (mtu > GKI_get_pool_bufsize (OBX_FCR_RX_POOL_ID)) |
| { |
| pool_id = BTA_HL_LRG_DATA_POOL_ID; |
| } |
| else |
| { |
| pool_id = L2CAP_DEFAULT_ERM_POOL_ID; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG3("bta_hl_set_user_rx_pool_id pool_id=%d mtu=%d default_ertm_pool_size=%d", |
| pool_id, mtu, GKI_get_pool_bufsize (OBX_FCR_RX_POOL_ID)); |
| #endif |
| |
| return pool_id; |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_tx_win_size |
| ** |
| ** Description This function sets the tx window size |
| ** |
| ** Returns UINT8 tx_win_size |
| ** |
| *******************************************************************************/ |
| UINT8 bta_hl_set_tx_win_size(UINT16 mtu, UINT16 mps) |
| { |
| UINT8 tx_win_size; |
| |
| if (mtu <= mps) |
| { |
| tx_win_size =1; |
| } |
| else |
| { |
| if (mps > 0) |
| { |
| tx_win_size = (mtu/mps)+1; |
| } |
| else |
| { |
| APPL_TRACE_ERROR0("The MPS is zero"); |
| tx_win_size = 10; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG3("bta_hl_set_tx_win_size win_size=%d mtu=%d mps=%d", |
| tx_win_size, mtu, mps); |
| #endif |
| return tx_win_size; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_mps |
| ** |
| ** Description This function sets the MPS |
| ** |
| ** Returns UINT16 MPS |
| ** |
| *******************************************************************************/ |
| UINT16 bta_hl_set_mps(UINT16 mtu) |
| { |
| UINT16 mps; |
| if (mtu > BTA_HL_L2C_MPS) |
| { |
| mps = BTA_HL_L2C_MPS; |
| } |
| else |
| { |
| mps = mtu; |
| } |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG2("bta_hl_set_mps mps=%d mtu=%d", |
| mps, mtu); |
| #endif |
| return mps; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_clean_mdl_cb |
| ** |
| ** Description This function clean up the specified MDL control block |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_clean_mdl_cb(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx) |
| { |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG3("bta_hl_clean_mdl_cb app_idx=%d mcl_idx=%d mdl_idx=%d", |
| app_idx, mcl_idx, mdl_idx); |
| #endif |
| utl_freebuf((void **) &p_dcb->p_tx_pkt); |
| utl_freebuf((void **) &p_dcb->p_rx_pkt); |
| utl_freebuf((void **) &p_dcb->p_echo_tx_pkt); |
| utl_freebuf((void **) &p_dcb->p_echo_rx_pkt); |
| |
| memset((void *)p_dcb, 0 , sizeof(tBTA_HL_MDL_CB)); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_get_buf |
| ** |
| ** Description This function allocate a buffer based on the specified data size |
| ** |
| ** Returns BT_HDR *. |
| ** |
| *******************************************************************************/ |
| BT_HDR * bta_hl_get_buf(UINT16 data_size) |
| { |
| BT_HDR *p_new; |
| UINT16 size = data_size + L2CAP_MIN_OFFSET + BT_HDR_SIZE; |
| |
| if (size < GKI_MAX_BUF_SIZE) |
| { |
| p_new = (BT_HDR *)GKI_getbuf(size); |
| } |
| else |
| { |
| p_new = (BT_HDR *) GKI_getpoolbuf(BTA_HL_LRG_DATA_POOL_ID); |
| } |
| |
| if (p_new) |
| { |
| p_new->len = data_size; |
| p_new->offset = L2CAP_MIN_OFFSET; |
| } |
| |
| return p_new; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_service_in_db |
| ** |
| ** Description This function check the specified service class(es) can be find in |
| ** the received SDP database |
| ** |
| ** Returns BOOLEAN TRUE - found |
| ** FALSE - not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_service_in_db( UINT8 app_idx, UINT8 mcl_idx, |
| UINT16 service_uuid, |
| tSDP_DISC_REC **pp_rec ) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN found = TRUE; |
| |
| switch (service_uuid) |
| { |
| case UUID_SERVCLASS_HDP_SINK: |
| case UUID_SERVCLASS_HDP_SOURCE: |
| if ((*pp_rec = SDP_FindServiceInDb(p_mcb->p_db, service_uuid, |
| *pp_rec)) == NULL) |
| { |
| found = FALSE; |
| } |
| break; |
| default: |
| if (((*pp_rec = bta_hl_find_sink_or_src_srv_class_in_db(p_mcb->p_db, |
| *pp_rec)) == NULL)) |
| { |
| found = FALSE; |
| } |
| break; |
| } |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_get_service_uuids |
| ** |
| ** |
| ** Description This function finds the service class(es) for both CCH and DCH oeprations |
| ** |
| ** Returns UINT16 - service_id |
| ** if service_uuid = 0xFFFF then it means service uuid |
| ** can be either Sink or Source |
| ** |
| *******************************************************************************/ |
| UINT16 bta_hl_get_service_uuids(UINT8 sdp_oper, UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 mdl_idx ) |
| { |
| tBTA_HL_MDL_CB *p_dcb; |
| UINT16 service_uuid = 0xFFFF; /* both Sink and Source */ |
| |
| switch (sdp_oper) |
| { |
| |
| case BTA_HL_SDP_OP_DCH_OPEN_INIT: |
| case BTA_HL_SDP_OP_DCH_RECONNECT_INIT: |
| p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| if (p_dcb->local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID) |
| { |
| if (p_dcb->peer_mdep_role == BTA_HL_MDEP_ROLE_SINK) |
| { |
| service_uuid = UUID_SERVCLASS_HDP_SINK; |
| } |
| else |
| { |
| service_uuid = UUID_SERVCLASS_HDP_SOURCE; |
| } |
| } |
| break; |
| case BTA_HL_SDP_OP_CCH_INIT: |
| default: |
| /* use default that is both Sink and Source */ |
| break; |
| } |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_get_service_uuids service_uuid=0x%x",service_uuid ); |
| #endif |
| return service_uuid; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_echo_cfg_rsp |
| ** |
| ** |
| ** Description This function finds the configuration response for the echo test |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_echo_cfg_rsp(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdep_idx, UINT8 cfg, |
| UINT8 *p_cfg_rsp) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MDEP *p_mdep= &p_acb->sup_feature.mdep[mdep_idx]; |
| BOOLEAN status =TRUE; |
| |
| if (p_mdep->mdep_id == BTA_HL_ECHO_TEST_MDEP_ID) |
| { |
| if ((cfg == BTA_HL_DCH_CFG_RELIABLE) || (cfg == BTA_HL_DCH_CFG_STREAMING)) |
| { |
| *p_cfg_rsp = cfg; |
| } |
| else if (cfg == BTA_HL_DCH_CFG_NO_PREF ) |
| { |
| *p_cfg_rsp = BTA_HL_DEFAULT_ECHO_TEST_SRC_DCH_CFG; |
| } |
| else |
| { |
| status = FALSE; |
| APPL_TRACE_ERROR0("Inavlid echo cfg value"); |
| } |
| return status; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!status) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_find_echo_cfg_rsp status=failed app_idx=%d mcl_idx=%d mdep_idx=%d cfg=%d", |
| app_idx, mcl_idx, mdep_idx, cfg); |
| } |
| #endif |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_validate_dch_cfg |
| ** |
| ** Description This function validate the DCH configuration |
| ** |
| ** Returns BOOLEAN - TRUE cfg is valid |
| ** FALSE not valid |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_validate_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx, |
| UINT8 cfg) |
| { |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| BOOLEAN is_valid =FALSE; |
| |
| |
| if (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx) && |
| (cfg != BTA_HL_DCH_CFG_RELIABLE)) |
| { |
| APPL_TRACE_ERROR0("the first DCH should be a reliable channel"); |
| return is_valid; |
| } |
| |
| switch (p_dcb->local_cfg) |
| { |
| case BTA_HL_DCH_CFG_NO_PREF: |
| |
| if ((cfg == BTA_HL_DCH_CFG_RELIABLE) || (cfg == BTA_HL_DCH_CFG_STREAMING)) |
| { |
| is_valid = TRUE; |
| } |
| break; |
| case BTA_HL_DCH_CFG_RELIABLE: |
| case BTA_HL_DCH_CFG_STREAMING: |
| if (p_dcb->local_cfg == cfg ) |
| { |
| is_valid = TRUE; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!is_valid) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_validate_dch_open_cfg is_valid=%d, cfg=%d", is_valid, cfg ); |
| } |
| #endif |
| return is_valid; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_cch_cb_indexes |
| ** |
| ** Description This function finds the indexes needed for the CCH state machine |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_cch_cb_indexes(tBTA_HL_DATA *p_msg, |
| UINT8 *p_app_idx, |
| UINT8 *p_mcl_idx) |
| { |
| BOOLEAN found = FALSE; |
| tBTA_HL_MCL_CB *p_mcb; |
| UINT8 app_idx = 0, mcl_idx = 0; |
| |
| switch (p_msg->hdr.event) |
| { |
| case BTA_HL_CCH_SDP_OK_EVT: |
| case BTA_HL_CCH_SDP_FAIL_EVT: |
| app_idx = p_msg->cch_sdp.app_idx; |
| mcl_idx = p_msg->cch_sdp.mcl_idx; |
| found = TRUE; |
| break; |
| |
| case BTA_HL_MCA_CONNECT_IND_EVT: |
| |
| if (bta_hl_find_app_idx_using_handle(p_msg->mca_evt.app_handle, &app_idx)) |
| { |
| if (bta_hl_find_mcl_idx(app_idx, p_msg->mca_evt.mca_data.connect_ind.bd_addr, &mcl_idx)) |
| { |
| /* local initiated */ |
| found = TRUE; |
| } |
| else if (!bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx)&& |
| bta_hl_find_avail_mcl_idx(app_idx, &mcl_idx)) |
| { |
| /* remote initiated */ |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| p_mcb->in_use = TRUE; |
| p_mcb->cch_oper = BTA_HL_CCH_OP_REMOTE_OPEN; |
| found = TRUE; |
| } |
| } |
| break; |
| |
| case BTA_HL_MCA_DISCONNECT_IND_EVT: |
| |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx)) |
| { |
| found = TRUE; |
| } |
| else if (bta_hl_find_app_idx_using_handle(p_msg->mca_evt.app_handle, &app_idx) && |
| bta_hl_find_mcl_idx(app_idx, p_msg->mca_evt.mca_data.disconnect_ind.bd_addr, &mcl_idx)) |
| { |
| found = TRUE; |
| } |
| |
| if (found) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| if ((p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_CLOSE) && (p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_OPEN) ) |
| { |
| p_mcb->cch_oper = BTA_HL_CCH_OP_REMOTE_CLOSE; |
| } |
| } |
| break; |
| |
| case BTA_HL_MCA_RSP_TOUT_IND_EVT: |
| |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx)) |
| { |
| found = TRUE; |
| } |
| |
| if (found) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| if ((p_mcb->cch_oper != BTA_HL_CCH_OP_REMOTE_CLOSE) && (p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_OPEN)) |
| { |
| p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_CLOSE; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| |
| if (found) |
| { |
| *p_app_idx = app_idx; |
| *p_mcl_idx = mcl_idx; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_find_cch_cb_indexes event=%s found=%d app_idx=%d mcl_idx=%d", |
| bta_hl_evt_code(p_msg->hdr.event), found, app_idx, mcl_idx); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_dch_cb_indexes |
| ** |
| ** Description This function finds the indexes needed for the DCH state machine |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_dch_cb_indexes(tBTA_HL_DATA *p_msg, |
| UINT8 *p_app_idx, |
| UINT8 *p_mcl_idx, |
| UINT8 *p_mdl_idx) |
| { |
| BOOLEAN found = FALSE; |
| tBTA_HL_MCL_CB *p_mcb; |
| UINT8 app_idx = 0, mcl_idx = 0, mdl_idx = 0; |
| |
| switch (p_msg->hdr.event) |
| { |
| case BTA_HL_MCA_CREATE_CFM_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx, p_msg->mca_evt.mca_data.create_cfm.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| |
| case BTA_HL_MCA_CREATE_IND_EVT: |
| case BTA_HL_MCA_RECONNECT_IND_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_avail_mdl_idx( app_idx, mcl_idx, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| |
| case BTA_HL_MCA_OPEN_CFM_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx, p_msg->mca_evt.mca_data.open_cfm.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| |
| case BTA_HL_MCA_OPEN_IND_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx, p_msg->mca_evt.mca_data.open_ind.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| |
| case BTA_HL_MCA_CLOSE_CFM_EVT: |
| |
| if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.close_cfm.mdl, |
| &app_idx, &mcl_idx, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_MCA_CLOSE_IND_EVT: |
| |
| if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.close_ind.mdl, |
| &app_idx, &mcl_idx, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_API_SEND_DATA_EVT: |
| |
| if (bta_hl_find_mdl_idx_using_handle(p_msg->api_send_data.mdl_handle, |
| &app_idx, &mcl_idx, &mdl_idx )) |
| { |
| found = TRUE; |
| } |
| |
| break; |
| |
| case BTA_HL_MCA_CONG_CHG_EVT: |
| |
| if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.cong_chg.mdl, |
| &app_idx, &mcl_idx, &mdl_idx )) |
| { |
| found = TRUE; |
| } |
| |
| break; |
| |
| case BTA_HL_MCA_RCV_DATA_EVT: |
| app_idx = p_msg->mca_rcv_data_evt.app_idx; |
| mcl_idx = p_msg->mca_rcv_data_evt.mcl_idx; |
| mdl_idx = p_msg->mca_rcv_data_evt.mdl_idx; |
| found = TRUE; |
| break; |
| case BTA_HL_DCH_RECONNECT_EVT: |
| case BTA_HL_DCH_OPEN_EVT: |
| case BTA_HL_DCH_ECHO_TEST_EVT: |
| case BTA_HL_DCH_SDP_FAIL_EVT: |
| app_idx = p_msg->dch_sdp.app_idx; |
| mcl_idx = p_msg->dch_sdp.mcl_idx; |
| mdl_idx = p_msg->dch_sdp.mdl_idx; |
| found = TRUE; |
| break; |
| case BTA_HL_MCA_RECONNECT_CFM_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx, p_msg->mca_evt.mca_data.reconnect_cfm.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| |
| |
| case BTA_HL_API_DCH_CREATE_RSP_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->api_dch_create_rsp.mcl_handle, &app_idx, &mcl_idx)&& |
| bta_hl_find_mdl_idx( app_idx, mcl_idx,p_msg->api_dch_create_rsp.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_MCA_ABORT_IND_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx,p_msg->mca_evt.mca_data.abort_ind.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_MCA_ABORT_CFM_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) && |
| bta_hl_find_mdl_idx( app_idx, mcl_idx, p_msg->mca_evt.mca_data.abort_cfm.mdl_id, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_CI_GET_TX_DATA_EVT: |
| case BTA_HL_CI_PUT_RX_DATA_EVT: |
| if (bta_hl_find_mdl_idx_using_handle(p_msg->ci_get_put_data.mdl_handle, &app_idx, &mcl_idx, &mdl_idx)) |
| { |
| found = TRUE; |
| } |
| break; |
| case BTA_HL_CI_GET_ECHO_DATA_EVT: |
| case BTA_HL_CI_PUT_ECHO_DATA_EVT: |
| if (bta_hl_find_mcl_idx_using_handle(p_msg->ci_get_put_echo_data.mcl_handle, &app_idx, &mcl_idx)) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| mdl_idx = p_mcb->echo_mdl_idx; |
| found = TRUE; |
| } |
| break; |
| |
| default: |
| break; |
| |
| } |
| |
| if (found) |
| { |
| *p_app_idx = app_idx; |
| *p_mcl_idx = mcl_idx; |
| *p_mdl_idx = mdl_idx; |
| } |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG5("bta_hl_find_dch_cb_indexes event=%s found=%d app_idx=%d mcl_idx=%d mdl_idx=%d", |
| bta_hl_evt_code(p_msg->hdr.event), found, *p_app_idx, *p_mcl_idx, *p_mdl_idx ); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_allocate_mdl_id |
| ** |
| ** Description This function allocates a MDL ID |
| ** |
| ** Returns UINT16 - MDL ID |
| ** |
| *******************************************************************************/ |
| UINT16 bta_hl_allocate_mdl_id(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx ) |
| { |
| UINT16 mdl_id=0; |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN duplicate_id; |
| UINT8 i, mdl_cfg_idx; |
| |
| do |
| { |
| duplicate_id = FALSE; |
| mdl_id = ((mdl_id+1) & 0xFEFF); |
| /* check mdl_ids that are used for the current conenctions */ |
| for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++) |
| { |
| if (p_mcb->mdl[i].in_use && |
| (i != mdl_idx) && |
| (p_mcb->mdl[i].mdl_id == mdl_id) ) |
| { |
| duplicate_id = TRUE; |
| break; |
| } |
| } |
| |
| if (duplicate_id) |
| { |
| /* start from the beginning to get another MDL value*/ |
| continue; |
| } |
| else |
| { |
| /* check mdl_ids that are stored in the persistent memory */ |
| if (bta_hl_find_mdl_cfg_idx(app_idx,mcl_idx, mdl_id, &mdl_cfg_idx)) |
| { |
| duplicate_id = TRUE; |
| } |
| else |
| { |
| /* found a new MDL value */ |
| break; |
| } |
| } |
| |
| }while (TRUE); |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_allocate_mdl OK mdl_id=%d", mdl_id); |
| #endif |
| return mdl_id; |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mdl_idx |
| ** |
| ** Description This function finds the MDL index based on mdl_id |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, UINT16 mdl_id, |
| UINT8 *p_mdl_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++) |
| { |
| if (p_mcb->mdl[i].in_use && |
| (mdl_id !=0) && |
| (p_mcb->mdl[i].mdl_id== mdl_id)) |
| { |
| found = TRUE; |
| *p_mdl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_mdl_idx found=%d mdl_id=%d mdl_idx=%d ", |
| found, mdl_id, i); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_an_active_mdl_idx |
| ** |
| ** Description This function finds an active MDL |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_an_active_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 *p_mdl_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++) |
| { |
| if (p_mcb->mdl[i].in_use && |
| (p_mcb->mdl[i].dch_state == BTA_HL_DCH_OPEN_ST)) |
| { |
| found = TRUE; |
| *p_mdl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (found) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_find_an_opened_mdl_idx found=%d app_idx=%d mcl_idx=%d mdl_idx=%d", |
| found, app_idx, mcl_idx, i); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_dch_setup_mdl_idx |
| ** |
| ** Description This function finds a MDL which in the DCH setup state |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_dch_setup_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 *p_mdl_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++) |
| { |
| if (p_mcb->mdl[i].in_use && |
| (p_mcb->mdl[i].dch_state == BTA_HL_DCH_OPENING_ST)) |
| { |
| found = TRUE; |
| *p_mdl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (found) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_find_dch_setup_mdl_idx found=%d app_idx=%d mcl_idx=%d mdl_idx=%d", |
| found, app_idx, mcl_idx, i); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_an_in_use_mcl_idx |
| ** |
| ** Description This function finds an in-use MCL control block index |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_an_in_use_mcl_idx(UINT8 app_idx, |
| UINT8 *p_mcl_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb; |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MCLS ; i ++) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, i); |
| if (p_mcb->in_use && |
| (p_mcb->cch_state != BTA_HL_CCH_IDLE_ST)) |
| { |
| found = TRUE; |
| *p_mcl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_an_in_use_mcl_idx found=%d app_idx=%d mcl_idx=%d ", |
| found, app_idx, i); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_an_in_use_app_idx |
| ** |
| ** Description This function finds an in-use application control block index |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_an_in_use_app_idx(UINT8 *p_app_idx) |
| { |
| tBTA_HL_APP_CB *p_acb ; |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| p_acb = BTA_HL_GET_APP_CB_PTR(i); |
| if (p_acb->in_use) |
| { |
| found = TRUE; |
| *p_app_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_an_in_use_app_idx found=%d app_idx=%d ", |
| found, i); |
| } |
| #endif |
| |
| return found; |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_app_idx |
| ** |
| ** Description This function finds the application control block index based on |
| ** the application ID |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx) |
| { |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| if (bta_hl_cb.acb[i].in_use && |
| (bta_hl_cb.acb[i].app_id == app_id)) |
| { |
| found = TRUE; |
| *p_app_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG3("bta_hl_find_app_idx found=%d app_id=%d idx=%d ", |
| found, app_id, i); |
| #endif |
| |
| return found; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_app_idx_using_handle |
| ** |
| ** Description This function finds the application control block index based on |
| ** the application handle |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_app_idx_using_handle(tBTA_HL_APP_HANDLE app_handle, |
| UINT8 *p_app_idx) |
| { |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| if (bta_hl_cb.acb[i].in_use && |
| (bta_hl_cb.acb[i].app_handle == app_handle)) |
| { |
| found = TRUE; |
| *p_app_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_app_idx_using_mca_handle status=%d handle=%d app_idx=%d ", |
| found, app_handle , i); |
| } |
| #endif |
| |
| return found; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mcl_idx_using_handle |
| ** |
| ** Description This function finds the MCL control block index based on |
| ** the MCL handle |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle, |
| UINT8 *p_app_idx, UINT8 *p_mcl_idx) |
| { |
| tBTA_HL_APP_CB *p_acb; |
| BOOLEAN found=FALSE; |
| UINT8 i = 0,j = 0; |
| |
| for (i=0; i<BTA_HL_NUM_APPS; i++) |
| { |
| p_acb = BTA_HL_GET_APP_CB_PTR(i); |
| if (p_acb->in_use) |
| { |
| for (j=0; j < BTA_HL_NUM_MCLS ; j++) |
| { |
| if ( p_acb->mcb[j].mcl_handle == mcl_handle ) |
| { |
| found = TRUE; |
| *p_app_idx = i; |
| *p_mcl_idx = j; |
| break; |
| } |
| } |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_mcl_idx_using_handle found=%d app_idx=%d mcl_idx=%d", |
| found, i, j); |
| } |
| #endif |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mcl_idx |
| ** |
| ** Description This function finds the MCL control block index based on |
| ** the peer BD address |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx) |
| { |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| tBTA_HL_MCL_CB *p_mcb; |
| |
| for (i=0; i < BTA_HL_NUM_MCLS ; i ++) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, i); |
| |
| if (bta_hl_cb.acb[app_idx].mcb[i].in_use && |
| (!memcmp (bta_hl_cb.acb[app_idx].mcb[i].bd_addr, p_bd_addr, BD_ADDR_LEN))) |
| { |
| found = TRUE; |
| *p_mcl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_mcl_idx found=%d idx=%d", |
| found, i); |
| } |
| #endif |
| return found; |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mdl_idx_using_handle |
| ** |
| ** Description This function finds the MDL control block index based on |
| ** the MDL handle |
| ** |
| ** Returns BOOLEAN TRUE-found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle, |
| UINT8 *p_app_idx,UINT8 *p_mcl_idx, |
| UINT8 *p_mdl_idx) |
| { |
| tBTA_HL_APP_CB *p_acb; |
| tBTA_HL_MCL_CB *p_mcb; |
| tBTA_HL_MDL_CB *p_dcb; |
| BOOLEAN found=FALSE; |
| UINT8 i,j,k; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| p_acb = BTA_HL_GET_APP_CB_PTR(i); |
| if (p_acb->in_use) |
| { |
| for (j=0; j< BTA_HL_NUM_MCLS; j++) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(i,j); |
| if (p_mcb->in_use) |
| { |
| for (k=0; k< BTA_HL_NUM_MDLS_PER_MCL; k++) |
| { |
| p_dcb = BTA_HL_GET_MDL_CB_PTR(i,j,k); |
| if (p_dcb->in_use) |
| { |
| if (p_dcb->mdl_handle == mdl_handle) |
| { |
| found = TRUE; |
| *p_app_idx = i; |
| *p_mcl_idx =j; |
| *p_mdl_idx = k; |
| break; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_mdl_idx_using_handle found=%d mdl_handle=%d ", |
| found, mdl_handle); |
| } |
| #endif |
| return found; |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_is_the_first_reliable_existed |
| ** |
| ** Description This function checks whether the first reliable DCH channel |
| ** has been setup on the MCL or not |
| ** |
| ** Returns BOOLEAN - TRUE exist |
| ** FALSE does not exist |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_is_the_first_reliable_existed(UINT8 app_idx, UINT8 mcl_idx ) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN is_existed =FALSE; |
| UINT8 i ; |
| |
| for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++) |
| { |
| if (p_mcb->mdl[i].in_use && p_mcb->mdl[i].is_the_first_reliable) |
| { |
| is_existed = TRUE; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_is_the_first_reliable_existed is_existed=%d ",is_existed ); |
| #endif |
| return is_existed; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_non_active_mdl_cfg |
| ** |
| ** Description This function finds a valid MDL configiration index and this |
| ** MDL ID is not active |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_non_active_mdl_cfg(UINT8 app_idx, UINT8 start_mdl_cfg_idx, |
| UINT8 *p_mdl_cfg_idx) |
| { |
| |
| tBTA_HL_MCL_CB *p_mcb; |
| tBTA_HL_MDL_CB *p_dcb; |
| tBTA_HL_MDL_CFG *p_mdl; |
| BOOLEAN mdl_in_use; |
| BOOLEAN found = FALSE; |
| UINT8 i,j,k; |
| |
| for (i = start_mdl_cfg_idx; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| mdl_in_use = FALSE; |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| for (j=0; j< BTA_HL_NUM_MCLS; j++) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, j); |
| if (p_mcb->in_use && |
| !memcmp(p_mdl->peer_bd_addr,p_mcb->bd_addr,BD_ADDR_LEN)) |
| { |
| |
| for (k=0; k<BTA_HL_NUM_MDLS_PER_MCL; k++) |
| { |
| p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, j, k); |
| |
| if (p_dcb->in_use && p_mdl->mdl_id == p_dcb->mdl_id) |
| { |
| mdl_in_use = TRUE; |
| break; |
| } |
| } |
| } |
| |
| if (mdl_in_use) |
| { |
| break; |
| } |
| } |
| |
| if (!mdl_in_use) |
| { |
| *p_mdl_cfg_idx = i; |
| found = TRUE; |
| break; |
| } |
| } |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mdl_cfg_idx |
| ** |
| ** Description This function finds an available MDL configiration index |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_avail_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 *p_mdl_cfg_idx) |
| { |
| tBTA_HL_MDL_CFG *p_mdl, *p_mdl1, *p_mdl2; |
| UINT8 i; |
| BOOLEAN found=FALSE; |
| UINT8 first_mdl_cfg_idx, second_mdl_cfg_idx, older_mdl_cfg_idx; |
| BOOLEAN done; |
| |
| |
| for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if (!p_mdl->active ) |
| { |
| /* found an unused space to store mdl cfg*/ |
| found=TRUE; |
| *p_mdl_cfg_idx =i; |
| break; |
| } |
| } |
| |
| if (!found) |
| { |
| /* all available mdl cfg spaces are in use so we need to find the mdl cfg which is |
| not currently in use and has the the oldest time stamp to remove*/ |
| |
| found = TRUE; |
| if (bta_hl_find_non_active_mdl_cfg(app_idx,0, &first_mdl_cfg_idx)) |
| { |
| if (bta_hl_find_non_active_mdl_cfg(app_idx,(UINT8) (first_mdl_cfg_idx+1), &second_mdl_cfg_idx)) |
| { |
| done = FALSE; |
| while (!done) |
| { |
| p_mdl1 = BTA_HL_GET_MDL_CFG_PTR(app_idx, first_mdl_cfg_idx); |
| p_mdl2 = BTA_HL_GET_MDL_CFG_PTR(app_idx, second_mdl_cfg_idx); |
| |
| if (p_mdl1->time < p_mdl2->time) |
| { |
| older_mdl_cfg_idx = first_mdl_cfg_idx; |
| } |
| else |
| { |
| older_mdl_cfg_idx = second_mdl_cfg_idx; |
| } |
| |
| if (bta_hl_find_non_active_mdl_cfg(app_idx,(UINT8) (second_mdl_cfg_idx+1), &second_mdl_cfg_idx)) |
| { |
| first_mdl_cfg_idx = older_mdl_cfg_idx; |
| } |
| else |
| { |
| done = TRUE; |
| } |
| } |
| |
| *p_mdl_cfg_idx = older_mdl_cfg_idx; |
| |
| } |
| else |
| { |
| *p_mdl_cfg_idx = first_mdl_cfg_idx; |
| } |
| |
| } |
| else |
| { |
| found = FALSE; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_avail_mdl_cfg_idx found=%d mdl_cfg_idx=%d ",found, *p_mdl_cfg_idx ); |
| } |
| #endif |
| |
| return found; |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mdl_cfg_idx |
| ** |
| ** Description This function finds the MDL configuration index based on |
| ** the MDL ID |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx, |
| tBTA_HL_MDL_ID mdl_id, UINT8 *p_mdl_cfg_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| tBTA_HL_MDL_CFG *p_mdl; |
| UINT8 i ; |
| BOOLEAN found=FALSE; |
| for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if(p_mdl->active) |
| APPL_TRACE_DEBUG2("bta_hl_find_mdl_cfg_idx: mdl_id =%d, p_mdl->mdl_id=%d",mdl_id, |
| p_mdl->mdl_id); |
| if (p_mdl->active && |
| (!memcmp (p_mcb->bd_addr, p_mdl->peer_bd_addr, BD_ADDR_LEN))&& |
| (p_mdl->mdl_id == mdl_id)) |
| { |
| found=TRUE; |
| *p_mdl_cfg_idx =i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_mdl_cfg_idx found=%d mdl_cfg_idx=%d ",found, i ); |
| } |
| #endif |
| |
| return found; |
| |
| |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_get_cur_time |
| ** |
| ** Description This function get the cuurent time value |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_get_cur_time(UINT8 app_idx, UINT8 *p_cur_time) |
| { |
| tBTA_HL_MDL_CFG *p_mdl; |
| UINT8 i, j, time_latest, time; |
| BOOLEAN found=FALSE, result=TRUE; |
| |
| for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if (p_mdl->active) |
| { |
| found=TRUE; |
| time_latest = p_mdl->time; |
| for (j=(i+1); j< BTA_HL_NUM_MDL_CFGS; j++ ) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, j); |
| if (p_mdl->active) |
| { |
| time = p_mdl->time; |
| if (time > time_latest) |
| { |
| time_latest = time; |
| } |
| } |
| } |
| break; |
| } |
| } |
| |
| |
| if (found) |
| { |
| if (time_latest < BTA_HL_MAX_TIME) |
| { |
| *p_cur_time = time_latest+1; |
| } |
| else |
| { |
| /* need to wrap around */ |
| result = FALSE; |
| } |
| } |
| else |
| { |
| *p_cur_time = BTA_HL_MIN_TIME; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!result) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_get_cur_time result=%s cur_time=%d", |
| (result?"OK":"FAIL"), *p_cur_time); |
| } |
| #endif |
| |
| return result; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_sort_cfg_time_idx |
| ** |
| ** Description This function sort the mdl configuration idx stored in array a |
| ** based on decending time value |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| void bta_hl_sort_cfg_time_idx(UINT8 app_idx, UINT8 *a, UINT8 n) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| UINT8 temp_time, temp_idx; |
| INT16 i, j; |
| for (i = 1; i < n; ++i) |
| { |
| temp_idx = a[i]; |
| temp_time = p_acb->mdl_cfg[temp_idx].time; |
| j = i - 1; |
| while ((j >= 0) && (temp_time < p_acb->mdl_cfg[a[j]].time)) |
| { |
| a[j + 1] = a[j]; |
| --j; |
| } |
| a[j + 1] = temp_idx; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_compact_mdl_cfg_time |
| ** |
| ** Description This function finds the MDL configuration index based on |
| ** the MDL ID |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| void bta_hl_compact_mdl_cfg_time(UINT8 app_idx, UINT8 mdep_id) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MDL_CFG *p_mdl; |
| UINT8 i, time_min, cnt=0; |
| UINT8 s_arr[BTA_HL_NUM_MDL_CFGS]; |
| |
| |
| for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if (p_mdl->active ) |
| { |
| s_arr[cnt]= i; |
| cnt++; |
| } |
| } |
| |
| |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_compact_mdl_cfg_time cnt=%d ",cnt ); |
| #endif |
| |
| |
| if (cnt) |
| { |
| bta_hl_sort_cfg_time_idx(app_idx, s_arr, cnt); |
| time_min = BTA_HL_MIN_TIME; |
| for (i=0;i<cnt; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, s_arr[i]); |
| p_mdl->time = time_min + i; |
| bta_hl_co_save_mdl(mdep_id, s_arr[i], p_mdl); |
| } |
| } |
| |
| |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_is_mdl_exsit_in_mcl |
| ** |
| ** Description This function checks whether the MDL ID |
| ** has already existed in teh MCL or not |
| ** |
| ** Returns BOOLEAN - TRUE exist |
| ** FALSE does not exist |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_is_mdl_exsit_in_mcl(UINT8 app_idx, BD_ADDR bd_addr, |
| tBTA_HL_MDL_ID mdl_id) |
| { |
| tBTA_HL_MDL_CFG *p_mdl; |
| BOOLEAN found = FALSE; |
| UINT8 i; |
| |
| for (i = 0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if (p_mdl->active && |
| !memcmp(p_mdl->peer_bd_addr, bd_addr,BD_ADDR_LEN)) |
| { |
| if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS) |
| { |
| if (p_mdl->mdl_id == mdl_id) |
| { |
| found = TRUE; |
| break; |
| } |
| } |
| else |
| { |
| found = TRUE; |
| break; |
| } |
| } |
| } |
| |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_delete_mdl_cfg |
| ** |
| ** Description This function delete the specified MDL ID |
| ** |
| ** Returns BOOLEAN - TRUE Success |
| ** FALSE Failed |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_delete_mdl_cfg(UINT8 app_idx, BD_ADDR bd_addr, |
| tBTA_HL_MDL_ID mdl_id) |
| { |
| tBTA_HL_MDL_CFG *p_mdl; |
| BOOLEAN success = FALSE; |
| UINT8 i; |
| tBTA_HL_APP_CB *p_acb= BTA_HL_GET_APP_CB_PTR(app_idx); |
| UINT8 app_id = p_acb->app_id; |
| |
| for (i = 0; i< BTA_HL_NUM_MDL_CFGS; i++) |
| { |
| p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i); |
| if (p_mdl->active && |
| !memcmp(p_mdl->peer_bd_addr, bd_addr,BD_ADDR_LEN)) |
| { |
| if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS) |
| { |
| if (p_mdl->mdl_id == mdl_id) |
| { |
| bta_hl_co_delete_mdl(p_mdl->local_mdep_id, i); |
| memset(p_mdl, 0, sizeof(tBTA_HL_MDL_CFG)); |
| success = TRUE; |
| break; |
| } |
| } |
| else |
| { |
| bta_hl_co_delete_mdl(p_mdl->local_mdep_id, i); |
| memset(p_mdl, 0, sizeof(tBTA_HL_MDL_CFG)); |
| success = TRUE; |
| } |
| } |
| } |
| |
| return success; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_is_mdl_value_valid |
| ** |
| ** |
| ** Description This function checks the specified MDL ID is in valid range or not |
| ** |
| ** Returns BOOLEAN - TRUE Success |
| ** FALSE Failed |
| ** |
| ** note: mdl_id range 0x0000 reserved, |
| ** 0x0001-oxFEFF dynamic range, |
| ** 0xFF00-0xFFFE reserved, |
| ** 0xFFFF indicates all MDLs (for delete operation only) |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_is_mdl_value_valid(tBTA_HL_MDL_ID mdl_id) |
| { |
| BOOLEAN status = TRUE; |
| |
| if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS) |
| { |
| if (mdl_id != 0) |
| { |
| if (mdl_id > BTA_HL_MAX_MDL_VAL ) |
| { |
| status = FALSE; |
| } |
| } |
| else |
| { |
| status = FALSE; |
| } |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_mdep_cfg_idx |
| ** |
| ** Description This function finds the MDEP configuration index based |
| ** on the local MDEP ID |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_mdep_cfg_idx(UINT8 app_idx, tBTA_HL_MDEP_ID local_mdep_id, |
| UINT8 *p_mdep_cfg_idx) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_SUP_FEATURE *p_sup_feature= &p_acb->sup_feature; |
| BOOLEAN found =FALSE; |
| UINT8 i; |
| |
| for (i=0; i< p_sup_feature->num_of_mdeps; i++) |
| { |
| if ( p_sup_feature->mdep[i].mdep_id == local_mdep_id) |
| { |
| found = TRUE; |
| *p_mdep_cfg_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_find_mdep_cfg_idx found=%d mdep_idx=%d local_mdep_id=%d ", |
| found,i, local_mdep_id ); |
| } |
| #endif |
| return found; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_rxtx_apdu_size |
| ** |
| ** Description This function finds the maximum APDU rx and tx sizes based on |
| ** the MDEP configuration data |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_find_rxtx_apdu_size(UINT8 app_idx, UINT8 mdep_cfg_idx, |
| UINT16 *p_rx_apu_size, |
| UINT16 *p_tx_apu_size) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MDEP_CFG *p_mdep_cfg; |
| UINT8 i; |
| UINT16 max_rx_apdu_size=0, max_tx_apdu_size=0; |
| |
| p_mdep_cfg = &p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg; |
| |
| |
| for (i=0; i< p_mdep_cfg->num_of_mdep_data_types ; i++) |
| { |
| |
| if (max_rx_apdu_size < p_mdep_cfg->data_cfg[i].max_rx_apdu_size) |
| { |
| max_rx_apdu_size = p_mdep_cfg->data_cfg[i].max_rx_apdu_size; |
| } |
| |
| if (max_tx_apdu_size < p_mdep_cfg->data_cfg[i].max_tx_apdu_size) |
| { |
| max_tx_apdu_size = p_mdep_cfg->data_cfg[i].max_tx_apdu_size; |
| } |
| } |
| |
| |
| *p_rx_apu_size = max_rx_apdu_size; |
| *p_tx_apu_size = max_tx_apdu_size; |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG2("bta_hl_find_rxtx_apdu_size max_rx_apdu_size=%d max_tx_apdu_size=%d ", |
| max_rx_apdu_size, max_tx_apdu_size ); |
| #endif |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_validate_peer_cfg |
| ** |
| ** Description This function validates the peer DCH configuration |
| ** |
| ** Returns BOOLEAN - TRUE validation is successful |
| ** FALSE validation failed |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_validate_peer_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx, |
| tBTA_HL_MDEP_ID peer_mdep_id, |
| tBTA_HL_MDEP_ROLE peer_mdep_role, |
| UINT8 sdp_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| tBTA_HL_SDP_REC *p_rec; |
| BOOLEAN peer_found =FALSE; |
| UINT8 i; |
| |
| APPL_TRACE_DEBUG2("bta_hl_validate_peer_cfg sdp_idx=%d app_idx %d", sdp_idx, app_idx); |
| |
| |
| if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID) |
| { |
| return TRUE; |
| } |
| |
| p_rec = &p_mcb->sdp.sdp_rec[sdp_idx]; |
| for (i=0; i< p_rec->num_mdeps; i++) |
| { |
| APPL_TRACE_DEBUG2("mdep_id %d peer_mdep_id %d",p_rec->mdep_cfg[i].mdep_id , peer_mdep_id); |
| APPL_TRACE_DEBUG2("mdep_role %d peer_mdep_role %d",p_rec->mdep_cfg[i].mdep_role, |
| peer_mdep_role) |
| if ( (p_rec->mdep_cfg[i].mdep_id == peer_mdep_id) && |
| (p_rec->mdep_cfg[i].mdep_role == peer_mdep_role)) |
| { |
| peer_found = TRUE; |
| |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!peer_found) |
| { |
| APPL_TRACE_DEBUG1("bta_hl_validate_peer_cfg failed num_mdeps=%d",p_rec->num_mdeps); |
| } |
| #endif |
| return peer_found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_chk_local_cfg |
| ** |
| ** Description This function check whether the local DCH configuration is OK or not |
| ** |
| ** Returns tBTA_HL_STATUS - OK - local DCH configuration is OK |
| ** NO_FIRST_RELIABLE - the streaming DCH configuration |
| ** is not OK and it needs to use |
| ** reliable DCH configuration |
| ** |
| *******************************************************************************/ |
| tBTA_HL_STATUS bta_hl_chk_local_cfg(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 mdep_cfg_idx, |
| tBTA_HL_DCH_CFG local_cfg) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_STATUS status = BTA_HL_STATUS_OK; |
| |
| if ( mdep_cfg_idx && |
| (p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE) && |
| (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx)) && |
| (local_cfg != BTA_HL_DCH_CFG_RELIABLE)) |
| { |
| status = BTA_HL_STATUS_NO_FIRST_RELIABLE; |
| APPL_TRACE_ERROR0("BTA_HL_STATUS_INVALID_DCH_CFG"); |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_validate_reconnect_params |
| ** |
| ** Description This function validates the reconnect parameters |
| ** |
| ** Returns BOOLEAN - TRUE validation is successful |
| ** FALSE validation failed |
| *******************************************************************************/ |
| BOOLEAN bta_hl_validate_reconnect_params(UINT8 app_idx, UINT8 mcl_idx, |
| tBTA_HL_API_DCH_RECONNECT *p_reconnect, |
| UINT8 *p_mdep_cfg_idx, UINT8 *p_mdl_cfg_idx) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_SUP_FEATURE *p_sup_feature = &p_acb->sup_feature; |
| UINT8 num_mdeps; |
| UINT8 mdl_cfg_idx; |
| BOOLEAN local_mdep_id_found =FALSE; |
| BOOLEAN mdl_cfg_found =FALSE; |
| BOOLEAN status=FALSE; |
| UINT8 i, in_use_mdl_idx = 0; |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG2("bta_hl_validate_reconnect_params mdl_id=%d app_idx=%d", p_reconnect->mdl_id, app_idx); |
| #endif |
| if (bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, p_reconnect->mdl_id, &mdl_cfg_idx)) |
| { |
| mdl_cfg_found = TRUE; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!mdl_cfg_found) |
| { |
| APPL_TRACE_DEBUG0("mdl_cfg_found not found"); |
| } |
| #endif |
| |
| |
| if (mdl_cfg_found) |
| { |
| num_mdeps = p_sup_feature->num_of_mdeps; |
| for (i=0; i< num_mdeps ; i++) |
| { |
| if ( p_sup_feature->mdep[i].mdep_id == p_acb->mdl_cfg[mdl_cfg_idx].local_mdep_id) |
| { |
| local_mdep_id_found = TRUE; |
| *p_mdep_cfg_idx =i; |
| *p_mdl_cfg_idx = mdl_cfg_idx; |
| break; |
| } |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!local_mdep_id_found) |
| { |
| APPL_TRACE_DEBUG0("local_mdep_id not found"); |
| } |
| #endif |
| |
| |
| if (local_mdep_id_found) |
| { |
| if (!bta_hl_find_mdl_idx(app_idx,mcl_idx, p_reconnect->mdl_id, &in_use_mdl_idx)) |
| { |
| status= TRUE; |
| } |
| else |
| { |
| APPL_TRACE_ERROR1("mdl_id=%d is curreltly in use",p_reconnect->mdl_id); |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!status) |
| { |
| APPL_TRACE_DEBUG3("Reconnect validation failed local_mdep_id found=%d mdl_cfg_idx found=%d in_use_mdl_idx=%d ", |
| local_mdep_id_found, mdl_cfg_found, in_use_mdl_idx); |
| } |
| #endif |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_avail_mcl_idx |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx) |
| { |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MCLS ; i ++) |
| { |
| if (!bta_hl_cb.acb[app_idx].mcb[i].in_use) |
| { |
| found = TRUE; |
| *p_mcl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_avail_mcl_idx found=%d idx=%d", |
| found, i); |
| } |
| #endif |
| return found; |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_avail_mdl_idx |
| ** |
| ** Description This function finds an available MDL control block index |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, |
| UINT8 *p_mdl_idx) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++) |
| { |
| if (!p_mcb->mdl[i].in_use) |
| { |
| memset((void *)&p_mcb->mdl[i],0, sizeof(tBTA_HL_MDL_CB)); |
| found = TRUE; |
| *p_mdl_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_avail_mdl_idx found=%d idx=%d", |
| found, i); |
| } |
| #endif |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_is_a_duplicate_id |
| ** |
| ** Description This function finds the application has been used or not |
| ** |
| ** Returns BOOLEAN - TRUE the app_id is a duplicate ID |
| ** FALSE not a duplicate ID |
| *******************************************************************************/ |
| BOOLEAN bta_hl_is_a_duplicate_id(UINT8 app_id) |
| { |
| BOOLEAN is_duplicate=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| if (bta_hl_cb.acb[i].in_use && |
| (bta_hl_cb.acb[i].app_id == app_id)) |
| { |
| is_duplicate = TRUE; |
| |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (is_duplicate) |
| { |
| |
| APPL_TRACE_DEBUG2("bta_hl_is_a_duplicate_id app_id=%d is_duplicate=%d", |
| app_id, is_duplicate); |
| } |
| #endif |
| |
| return is_duplicate; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_find_avail_app_idx |
| ** |
| ** Description This function finds an available application control block index |
| ** |
| ** Returns BOOLEAN - TRUE found |
| ** FALSE not found |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_find_avail_app_idx(UINT8 *p_idx) |
| { |
| BOOLEAN found=FALSE; |
| UINT8 i; |
| |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| if (!bta_hl_cb.acb[i].in_use) |
| { |
| found = TRUE; |
| *p_idx = i; |
| break; |
| } |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!found) |
| { |
| APPL_TRACE_DEBUG2("bta_hl_find_avail_app_idx found=%d app_idx=%d", |
| found, i); |
| } |
| #endif |
| return found; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_app_update |
| ** |
| ** Description This function registers an HDP application MCAP and DP |
| ** |
| ** Returns tBTA_HL_STATUS -registration status |
| ** |
| *******************************************************************************/ |
| tBTA_HL_STATUS bta_hl_app_update(UINT8 app_id, BOOLEAN is_register) |
| { |
| tBTA_HL_STATUS status = BTA_HL_STATUS_OK; |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(0); |
| tMCA_CS mca_cs; |
| UINT8 i, mdep_idx, num_of_mdeps; |
| UINT8 mdep_counter = 0; |
| |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_app_update app_id=%d", app_id); |
| #endif |
| |
| if (is_register) |
| { |
| if ((status == BTA_HL_STATUS_OK) && |
| bta_hl_co_get_num_of_mdep(app_id, &num_of_mdeps)) |
| { |
| for (i=0; i < num_of_mdeps; i++) |
| { |
| mca_cs.type = MCA_TDEP_DATA; |
| mca_cs.max_mdl = BTA_HL_NUM_MDLS_PER_MDEP; |
| mca_cs.p_data_cback = bta_hl_mcap_data_cback; |
| /* Find the first available mdep index, and create a MDL Endpoint */ |
| // make a function later if needed |
| for (mdep_idx = 1; mdep_idx < BTA_HL_NUM_MDEPS; mdep_idx++) |
| { |
| if ( p_acb->sup_feature.mdep[mdep_idx].mdep_id == 0) |
| { |
| break; /* We found an available index */ |
| } |
| else |
| { |
| mdep_counter++; |
| } |
| } |
| /* If no available MDEPs, return error */ |
| if (mdep_idx == BTA_HL_NUM_MDEPS) |
| { |
| APPL_TRACE_ERROR0("bta_hl_app_update: Out of MDEP IDs"); |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| break; |
| } |
| if (MCA_CreateDep((tMCA_HANDLE)p_acb->app_handle, |
| &(p_acb->sup_feature.mdep[mdep_idx].mdep_id), &mca_cs) == MCA_SUCCESS) |
| { |
| if (bta_hl_co_get_mdep_config(app_id, |
| mdep_idx, |
| mdep_counter, |
| p_acb->sup_feature.mdep[mdep_idx].mdep_id, |
| &p_acb->sup_feature.mdep[mdep_idx].mdep_cfg)) |
| { |
| p_acb->sup_feature.mdep[mdep_idx].ori_app_id = app_id; |
| APPL_TRACE_DEBUG4("mdep idx %d id %d ori_app_id %d num data type %d",mdep_idx, |
| p_acb->sup_feature.mdep[mdep_idx].mdep_id, |
| p_acb->sup_feature.mdep[mdep_idx].ori_app_id, |
| p_acb->sup_feature.mdep[mdep_idx].mdep_cfg.num_of_mdep_data_types); |
| if (p_acb->sup_feature.mdep[mdep_idx].mdep_cfg.mdep_role == |
| BTA_HL_MDEP_ROLE_SOURCE) |
| { |
| p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SOURCE; |
| } |
| else if (p_acb->sup_feature.mdep[mdep_idx].mdep_cfg.mdep_role == |
| BTA_HL_MDEP_ROLE_SINK) |
| { |
| p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SINK; |
| } |
| else |
| { |
| APPL_TRACE_ERROR1("bta_hl_app_registration: Invalid Role %d", |
| p_acb->sup_feature.mdep[mdep_idx].mdep_cfg.mdep_role); |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| break; |
| } |
| } |
| else |
| { |
| APPL_TRACE_ERROR0("bta_hl_app_registration: Cfg callout failed"); |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| break; |
| } |
| } |
| else |
| { |
| APPL_TRACE_ERROR0("bta_hl_app_registration: MCA_CreateDep failed"); |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| break; |
| } |
| |
| } |
| p_acb->sup_feature.num_of_mdeps += num_of_mdeps; |
| APPL_TRACE_DEBUG1("num_of_mdeps %d", p_acb->sup_feature.num_of_mdeps); |
| |
| if ((status == BTA_HL_STATUS_OK) && |
| (p_acb->sup_feature.app_role_mask == BTA_HL_MDEP_ROLE_MASK_SOURCE)) |
| { |
| p_acb->sup_feature.advertize_source_sdp = |
| bta_hl_co_advrtise_source_sdp(app_id); |
| } |
| |
| if ((status == BTA_HL_STATUS_OK)&& |
| (!bta_hl_co_get_echo_config(app_id, &p_acb->sup_feature.echo_cfg))) |
| { |
| status = BTA_HL_STATUS_ECHO_CO_FAIL; |
| } |
| |
| if ((status == BTA_HL_STATUS_OK)&& |
| (!bta_hl_co_load_mdl_config(app_id, BTA_HL_NUM_MDL_CFGS, &p_acb->mdl_cfg[0]))) |
| { |
| status = BTA_HL_STATUS_MDL_CFG_CO_FAIL; |
| } |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| } |
| } |
| else |
| { |
| for (i=1; i<BTA_HL_NUM_MDEPS; i++) |
| { |
| if (p_acb->sup_feature.mdep[i].ori_app_id == app_id) |
| { |
| APPL_TRACE_DEBUG1("Found index %", i); |
| |
| |
| if (MCA_DeleteDep((tMCA_HANDLE)p_acb->app_handle, |
| (p_acb->sup_feature.mdep[i].mdep_id)) != MCA_SUCCESS) |
| { |
| APPL_TRACE_ERROR0("Error deregistering"); |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| return status; |
| } |
| memset(&p_acb->sup_feature.mdep[i], 0, sizeof(tBTA_HL_MDEP)); |
| } |
| } |
| |
| |
| } |
| |
| if (status == BTA_HL_STATUS_OK) |
| { |
| /* Register/Update MDEP(s) in SDP Record */ |
| status = bta_hl_sdp_update(app_id); |
| } |
| /* else do cleanup */ |
| |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_app_registration |
| ** |
| ** Description This function registers an HDP application MCAP and DP |
| ** |
| ** Returns tBTA_HL_STATUS -registration status |
| ** |
| *******************************************************************************/ |
| tBTA_HL_STATUS bta_hl_app_registration(UINT8 app_idx) |
| { |
| tBTA_HL_STATUS status = BTA_HL_STATUS_OK; |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tMCA_REG reg; |
| tMCA_CS mca_cs; |
| UINT8 i, num_of_mdeps; |
| UINT8 mdep_counter = 0; |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("bta_hl_app_registration app_idx=%d", app_idx); |
| #endif |
| |
| reg.ctrl_psm = p_acb->ctrl_psm; |
| reg.data_psm = p_acb->data_psm; |
| reg.sec_mask = p_acb->sec_mask; |
| reg.rsp_tout = BTA_HL_MCAP_RSP_TOUT; |
| |
| if ( (p_acb->app_handle = (tBTA_HL_APP_HANDLE) MCA_Register(®, bta_hl_mcap_ctrl_cback))!=0) |
| { |
| mca_cs.type = MCA_TDEP_ECHO; |
| mca_cs.max_mdl = BTA_HL_NUM_MDLS_PER_MDEP; |
| mca_cs.p_data_cback = bta_hl_mcap_data_cback; |
| |
| if (MCA_CreateDep((tMCA_HANDLE)p_acb->app_handle, |
| &(p_acb->sup_feature.mdep[0].mdep_id), |
| &mca_cs) == MCA_SUCCESS) |
| { |
| if (p_acb->sup_feature.mdep[0].mdep_id != BTA_HL_ECHO_TEST_MDEP_ID) |
| { |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| APPL_TRACE_ERROR1("BAD MDEP ID for echo test mdep_id=%d", |
| p_acb->sup_feature.mdep[0].mdep_id ); |
| } |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| APPL_TRACE_ERROR0("MCA_CreateDep for echo test(mdep_id=0) failed"); |
| } |
| |
| |
| if ((status == BTA_HL_STATUS_OK) && |
| bta_hl_co_get_num_of_mdep(p_acb->app_id, &num_of_mdeps)) |
| { |
| p_acb->sup_feature.num_of_mdeps = num_of_mdeps+1; |
| |
| for (i=1; i<p_acb->sup_feature.num_of_mdeps; i++) |
| { |
| mca_cs.type = MCA_TDEP_DATA; |
| mca_cs.max_mdl = BTA_HL_NUM_MDLS_PER_MDEP; |
| mca_cs.p_data_cback = bta_hl_mcap_data_cback; |
| |
| if (MCA_CreateDep((tMCA_HANDLE)p_acb->app_handle, |
| &(p_acb->sup_feature.mdep[i].mdep_id), &mca_cs) == MCA_SUCCESS) |
| { |
| if (bta_hl_co_get_mdep_config(p_acb->app_id, |
| i,mdep_counter, |
| p_acb->sup_feature.mdep[i].mdep_id, |
| &p_acb->sup_feature.mdep[i].mdep_cfg)) |
| { |
| if (p_acb->sup_feature.mdep[i].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE) |
| { |
| p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SOURCE; |
| } |
| else if (p_acb->sup_feature.mdep[i].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SINK) |
| { |
| p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SINK; |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| break; |
| } |
| p_acb->sup_feature.mdep[i].ori_app_id = p_acb->app_id; |
| APPL_TRACE_DEBUG2("index %d ori_app_id %d", i, |
| p_acb->sup_feature.mdep[i].ori_app_id); |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| break; |
| } |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| break; |
| } |
| } |
| |
| |
| |
| if ((status == BTA_HL_STATUS_OK) && |
| (p_acb->sup_feature.app_role_mask == BTA_HL_MDEP_ROLE_MASK_SOURCE)) |
| { |
| /* this is a source only applciation */ |
| p_acb->sup_feature.advertize_source_sdp = |
| bta_hl_co_advrtise_source_sdp(p_acb->app_id); |
| } |
| |
| if ((status == BTA_HL_STATUS_OK)&& |
| (!bta_hl_co_get_echo_config(p_acb->app_id, &p_acb->sup_feature.echo_cfg))) |
| { |
| status = BTA_HL_STATUS_ECHO_CO_FAIL; |
| } |
| |
| if ((status == BTA_HL_STATUS_OK)&& |
| (!bta_hl_co_load_mdl_config(p_acb->app_id, BTA_HL_NUM_MDL_CFGS, &p_acb->mdl_cfg[0]))) |
| { |
| status = BTA_HL_STATUS_MDL_CFG_CO_FAIL; |
| } |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MDEP_CO_FAIL; |
| } |
| } |
| else |
| { |
| status = BTA_HL_STATUS_MCAP_REG_FAIL; |
| } |
| |
| if (status == BTA_HL_STATUS_OK) |
| { |
| status = bta_hl_sdp_register(app_idx); |
| } |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_discard_data |
| ** |
| ** Description This function discard an HDP event |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_discard_data(UINT16 event, tBTA_HL_DATA *p_data) |
| { |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_ERROR1("BTA HL Discard event=%s",bta_hl_evt_code(event)); |
| |
| #endif |
| |
| switch (event) |
| { |
| case BTA_HL_API_SEND_DATA_EVT: |
| break; |
| |
| case BTA_HL_MCA_RCV_DATA_EVT: |
| utl_freebuf((void**)&p_data->mca_rcv_data_evt.p_pkt); |
| break; |
| |
| default: |
| /*Nothing to free*/ |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_save_mdl_cfg |
| ** |
| ** Description This function saves the MDL configuration |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_save_mdl_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx ) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| UINT8 mdl_cfg_idx; |
| tBTA_HL_MDL_ID mdl_id; |
| BOOLEAN found=TRUE; |
| tBTA_HL_MDL_CFG mdl_cfg; |
| tBTA_HL_MDEP *p_mdep_cfg; |
| tBTA_HL_L2CAP_CFG_INFO l2cap_cfg; |
| UINT8 time_val = 0; |
| mdl_id = p_dcb->mdl_id; |
| if (!bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, mdl_id, &mdl_cfg_idx)) |
| { |
| if (!bta_hl_find_avail_mdl_cfg_idx(app_idx, mcl_idx, &mdl_cfg_idx)) |
| { |
| APPL_TRACE_ERROR0("No space to save the MDL config"); |
| found= FALSE; /*no space available*/ |
| } |
| } |
| |
| if (found) |
| { |
| bta_hl_get_l2cap_cfg(p_dcb->mdl_handle, &l2cap_cfg); |
| if (!bta_hl_get_cur_time(app_idx, &time_val )) |
| { |
| bta_hl_compact_mdl_cfg_time(app_idx,p_dcb->local_mdep_id); |
| bta_hl_get_cur_time(app_idx, &time_val); |
| } |
| mdl_cfg.active = TRUE; |
| mdl_cfg.time = time_val; |
| mdl_cfg.mdl_id = p_dcb->mdl_id; |
| mdl_cfg.dch_mode = p_dcb->dch_mode; |
| mdl_cfg.mtu = l2cap_cfg.mtu; |
| mdl_cfg.fcs = l2cap_cfg.fcs; |
| |
| bdcpy(mdl_cfg.peer_bd_addr, p_mcb->bd_addr); |
| mdl_cfg.local_mdep_id= p_dcb->local_mdep_id; |
| p_mdep_cfg = &p_acb->sup_feature.mdep[p_dcb->local_mdep_cfg_idx]; |
| mdl_cfg.local_mdep_role= p_mdep_cfg->mdep_cfg.mdep_role; |
| memcpy(&p_acb->mdl_cfg[mdl_cfg_idx], &mdl_cfg, sizeof(tBTA_HL_MDL_CFG)); |
| bta_hl_co_save_mdl(mdl_cfg.local_mdep_id, mdl_cfg_idx, &mdl_cfg); |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (found) |
| { |
| if (p_dcb->mtu != l2cap_cfg.mtu) |
| { |
| APPL_TRACE_WARNING2("MCAP and L2CAP peer mtu size out of sync from MCAP mtu=%d from l2cap mtu=%d", |
| p_dcb->mtu, l2cap_cfg.mtu); |
| } |
| APPL_TRACE_DEBUG1("bta_hl_save_mdl_cfg saved=%d", found); |
| APPL_TRACE_DEBUG4("Saved. L2cap cfg mdl_id=%d mtu=%d fcs=%d dch_mode=%d", |
| mdl_cfg.mdl_id, mdl_cfg.mtu, mdl_cfg.fcs, mdl_cfg.dch_mode); |
| } |
| #endif |
| |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_set_dch_chan_cfg |
| ** |
| ** Description This function setups the L2CAP DCH channel configuration |
| ** |
| ** Returns void |
| *******************************************************************************/ |
| void bta_hl_set_dch_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,tBTA_HL_DATA *p_data) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| UINT8 l2cap_mode = L2CAP_FCR_ERTM_MODE; |
| tBTA_HL_SUP_FEATURE *p_sup_feature= &p_acb->sup_feature; |
| UINT8 local_mdep_cfg_idx = p_dcb->local_mdep_cfg_idx; |
| |
| switch (p_dcb->dch_oper) |
| { |
| case BTA_HL_DCH_OP_LOCAL_RECONNECT: |
| case BTA_HL_DCH_OP_REMOTE_RECONNECT: |
| if (p_dcb->dch_mode == BTA_HL_DCH_MODE_STREAMING) |
| l2cap_mode = L2CAP_FCR_STREAM_MODE; |
| break; |
| case BTA_HL_DCH_OP_LOCAL_OPEN: |
| if (p_data->mca_evt.mca_data.create_cfm.cfg == BTA_HL_DCH_CFG_STREAMING) |
| l2cap_mode = L2CAP_FCR_STREAM_MODE; |
| break; |
| case BTA_HL_DCH_OP_REMOTE_OPEN: |
| if (p_dcb->local_cfg == BTA_HL_DCH_CFG_STREAMING ) |
| l2cap_mode = L2CAP_FCR_STREAM_MODE; |
| break; |
| default: |
| APPL_TRACE_ERROR1("Invalid dch oper=%d for set dch chan cfg", p_dcb->dch_oper); |
| break; |
| } |
| p_dcb->chnl_cfg.fcr_opt.mode = l2cap_mode; |
| p_dcb->chnl_cfg.fcr_opt.mps = bta_hl_set_mps(p_dcb->max_rx_apdu_size); |
| p_dcb->chnl_cfg.fcr_opt.tx_win_sz = bta_hl_set_tx_win_size(p_dcb->max_rx_apdu_size, |
| p_dcb->chnl_cfg.fcr_opt.mps); |
| p_dcb->chnl_cfg.fcr_opt.max_transmit= BTA_HL_L2C_MAX_TRANSMIT; |
| p_dcb->chnl_cfg.fcr_opt.rtrans_tout = BTA_HL_L2C_RTRANS_TOUT; |
| p_dcb->chnl_cfg.fcr_opt.mon_tout = BTA_HL_L2C_MON_TOUT; |
| |
| p_dcb->chnl_cfg.user_rx_pool_id = bta_hl_set_user_rx_pool_id(p_dcb->max_rx_apdu_size); |
| p_dcb->chnl_cfg.user_tx_pool_id = bta_hl_set_user_tx_pool_id(p_dcb->max_tx_apdu_size); |
| p_dcb->chnl_cfg.fcr_rx_pool_id = BTA_HL_L2C_FCR_RX_POOL_ID; |
| p_dcb->chnl_cfg.fcr_tx_pool_id = BTA_HL_L2C_FCR_TX_POOL_ID; |
| p_dcb->chnl_cfg.data_mtu = p_dcb->max_rx_apdu_size; |
| |
| p_dcb->chnl_cfg.fcs = BTA_HL_MCA_NO_FCS; |
| if (local_mdep_cfg_idx != BTA_HL_ECHO_TEST_MDEP_CFG_IDX) |
| { |
| if (p_sup_feature->mdep[local_mdep_cfg_idx].mdep_cfg.mdep_role == |
| BTA_HL_MDEP_ROLE_SOURCE) |
| { |
| p_dcb->chnl_cfg.fcs = BTA_HL_DEFAULT_SOURCE_FCS; |
| } |
| } |
| else |
| { |
| p_dcb->chnl_cfg.fcs = BTA_HL_MCA_USE_FCS; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG1("L2CAP Params l2cap_mode[3-ERTM 4-STREAM]=%d", l2cap_mode); |
| APPL_TRACE_DEBUG2("Use FCS =%s mtu=%d", ((p_dcb->chnl_cfg.fcs & 1)?"YES":"NO"), |
| p_dcb->chnl_cfg.data_mtu); |
| APPL_TRACE_DEBUG5("tx_win_sz=%d, max_transmit=%d, rtrans_tout=%d, mon_tout=%d, mps=%d", |
| p_dcb->chnl_cfg.fcr_opt.tx_win_sz, |
| p_dcb->chnl_cfg.fcr_opt.max_transmit, |
| p_dcb->chnl_cfg.fcr_opt.rtrans_tout, |
| p_dcb->chnl_cfg.fcr_opt.mon_tout, |
| p_dcb->chnl_cfg.fcr_opt.mps); |
| |
| APPL_TRACE_DEBUG4("USER rx_pool_id=%d, tx_pool_id=%d, FCR rx_pool_id=%d, tx_pool_id=%d", |
| p_dcb->chnl_cfg.user_rx_pool_id, |
| p_dcb->chnl_cfg.user_tx_pool_id, |
| p_dcb->chnl_cfg.fcr_rx_pool_id, |
| p_dcb->chnl_cfg.fcr_tx_pool_id); |
| |
| #endif |
| |
| |
| |
| |
| |
| |
| |
| |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_get_l2cap_cfg |
| ** |
| ** Description This function get the current L2CAP channel configuration |
| ** |
| ** Returns BOOLEAN - TRUE - operation is successful |
| *******************************************************************************/ |
| BOOLEAN bta_hl_get_l2cap_cfg(tBTA_HL_MDL_HANDLE mdl_hnd, tBTA_HL_L2CAP_CFG_INFO *p_cfg) |
| { |
| BOOLEAN success = FALSE; |
| UINT16 lcid; |
| tL2CAP_CFG_INFO *p_our_cfg; |
| tL2CAP_CH_CFG_BITS our_cfg_bits; |
| tL2CAP_CFG_INFO *p_peer_cfg; |
| tL2CAP_CH_CFG_BITS peer_cfg_bits; |
| |
| lcid = MCA_GetL2CapChannel((tMCA_DL) mdl_hnd); |
| if ( lcid && |
| L2CA_GetCurrentConfig(lcid, &p_our_cfg, &our_cfg_bits, &p_peer_cfg, |
| &peer_cfg_bits)) |
| { |
| p_cfg->fcs = BTA_HL_MCA_NO_FCS; |
| if (our_cfg_bits & L2CAP_CH_CFG_MASK_FCS) |
| { |
| p_cfg->fcs |= p_our_cfg->fcs; |
| } |
| else |
| { |
| p_cfg->fcs = BTA_HL_MCA_USE_FCS; |
| } |
| |
| if (p_cfg->fcs != BTA_HL_MCA_USE_FCS ) |
| { |
| if (peer_cfg_bits & L2CAP_CH_CFG_MASK_FCS) |
| { |
| p_cfg->fcs |= p_peer_cfg->fcs; |
| } |
| else |
| { |
| p_cfg->fcs = BTA_HL_MCA_USE_FCS; |
| } |
| } |
| |
| p_cfg->mtu =0; |
| if (peer_cfg_bits & L2CAP_CH_CFG_MASK_MTU) |
| { |
| p_cfg->mtu = p_peer_cfg->mtu; |
| } |
| else |
| { |
| p_cfg->mtu = L2CAP_DEFAULT_MTU; |
| } |
| success = TRUE; |
| } |
| |
| #if BTA_HL_DEBUG == TRUE |
| if (!success) |
| { |
| APPL_TRACE_DEBUG3("bta_hl_get_l2cap_cfg success=%d mdl=%d lcid=%d", success, mdl_hnd, lcid); |
| APPL_TRACE_DEBUG2("l2cap mtu=%d fcs=%d", p_cfg->mtu, p_cfg->fcs); |
| } |
| #endif |
| |
| return success; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_validate_chan_cfg |
| ** |
| ** Description This function validates the L2CAP channel configuration |
| ** |
| ** Returns BOOLEAN - TRUE - validation is successful |
| *******************************************************************************/ |
| BOOLEAN bta_hl_validate_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MDL_CB *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| BOOLEAN success = FALSE; |
| UINT8 mdl_cfg_idx = 0; |
| tBTA_HL_L2CAP_CFG_INFO l2cap_cfg; |
| BOOLEAN get_l2cap_result, get_mdl_result; |
| |
| get_l2cap_result = bta_hl_get_l2cap_cfg(p_dcb->mdl_handle, &l2cap_cfg); |
| get_mdl_result = bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, p_dcb->mdl_id, &mdl_cfg_idx); |
| |
| if (get_l2cap_result && get_mdl_result) |
| { |
| if ((p_acb->mdl_cfg[mdl_cfg_idx].mtu <= l2cap_cfg.mtu) && |
| (p_acb->mdl_cfg[mdl_cfg_idx].fcs == l2cap_cfg.fcs) && |
| (p_acb->mdl_cfg[mdl_cfg_idx].dch_mode == p_dcb->dch_mode)) |
| { |
| success = TRUE; |
| } |
| } |
| |
| |
| #if BTA_HL_DEBUG == TRUE |
| |
| if (p_dcb->mtu != l2cap_cfg.mtu) |
| { |
| APPL_TRACE_WARNING2("MCAP and L2CAP peer mtu size out of sync from MCAP mtu=%d from l2cap mtu=%d", |
| p_dcb->mtu, l2cap_cfg.mtu); |
| } |
| |
| if (!success) |
| { |
| APPL_TRACE_DEBUG4("bta_hl_validate_chan_cfg success=%d app_idx=%d mcl_idx=%d mdl_idx=%d",success, app_idx, mcl_idx, mdl_idx); |
| APPL_TRACE_DEBUG3("Cur. L2cap cfg mtu=%d fcs=%d dch_mode=%d", l2cap_cfg.mtu, l2cap_cfg.fcs, p_dcb->dch_mode); |
| APPL_TRACE_DEBUG3("From saved: L2cap cfg mtu=%d fcs=%d dch_mode=%d", p_acb->mdl_cfg[mdl_cfg_idx].mtu, |
| p_acb->mdl_cfg[mdl_cfg_idx].fcs , p_acb->mdl_cfg[mdl_cfg_idx].dch_mode); |
| } |
| #endif |
| |
| return success; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_is_cong_on |
| ** |
| ** Description This function checks whether the congestion condition is on or not |
| ** |
| ** Returns BOOLEAN - TRUE DCH is congested |
| ** FALSE not congested |
| ** |
| *******************************************************************************/ |
| BOOLEAN bta_hl_is_cong_on(UINT8 app_id, BD_ADDR bd_addr, tBTA_HL_MDL_ID mdl_id) |
| |
| { |
| tBTA_HL_MDL_CB *p_dcb; |
| UINT8 app_idx = 0, mcl_idx, mdl_idx; |
| BOOLEAN cong_status = TRUE; |
| |
| if (bta_hl_find_app_idx(app_id, &app_idx)) |
| { |
| if (bta_hl_find_mcl_idx(app_idx, bd_addr, &mcl_idx )) |
| { |
| if (bta_hl_find_mdl_idx(app_idx, mcl_idx, mdl_id, &mdl_idx )) |
| { |
| p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| cong_status = p_dcb->cong; |
| } |
| } |
| } |
| |
| return cong_status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_check_cch_close |
| ** |
| ** Description This function checks whether there is a pending CCH close request |
| ** or not |
| ** |
| ** Returns void |
| *******************************************************************************/ |
| void bta_hl_check_cch_close(UINT8 app_idx, UINT8 mcl_idx, tBTA_HL_DATA *p_data, BOOLEAN check_dch_setup ) |
| { |
| tBTA_HL_MCL_CB *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| tBTA_HL_MDL_CB *p_dcb; |
| UINT8 mdl_idx; |
| |
| #if (BTA_HL_DEBUG == TRUE) |
| APPL_TRACE_DEBUG1("bta_hl_check_cch_close cch_close_dch_oper=%d",p_mcb->cch_close_dch_oper ); |
| #endif |
| |
| if (p_mcb->cch_oper == BTA_HL_CCH_OP_LOCAL_CLOSE) |
| { |
| if (check_dch_setup && bta_hl_find_dch_setup_mdl_idx(app_idx, mcl_idx, &mdl_idx)) |
| { |
| p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx); |
| if (!p_mcb->rsp_tout) |
| { |
| p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_ABORT; |
| |
| if (!p_dcb->abort_oper) |
| { |
| p_dcb->abort_oper |= BTA_HL_ABORT_CCH_CLOSE_MASK; |
| bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ABORT_EVT, p_data); |
| } |
| } |
| else |
| { |
| p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_CLOSE; |
| bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data); |
| } |
| } |
| else if (bta_hl_find_an_active_mdl_idx(app_idx, mcl_idx,&mdl_idx)) |
| { |
| p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_CLOSE; |
| bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_EVT, p_data); |
| } |
| else |
| { |
| p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_NONE; |
| bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_EVT, p_data); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_clean_app |
| ** |
| ** Description Cleans up the HDP application resources and control block |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_clean_app(UINT8 app_idx) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| int i, num_act_apps=0; |
| |
| #if BTA_HL_DEBUG == TRUE |
| APPL_TRACE_DEBUG0("bta_hl_clean_app"); |
| #endif |
| MCA_Deregister((tMCA_HANDLE)p_acb->app_handle); |
| |
| if (p_acb->sdp_handle) SDP_DeleteRecord(p_acb->sdp_handle); |
| |
| memset((void *) p_acb, 0, sizeof(tBTA_HL_APP_CB)); |
| |
| /* check any application is still active */ |
| for (i=0; i < BTA_HL_NUM_APPS ; i ++) |
| { |
| p_acb = BTA_HL_GET_APP_CB_PTR(i); |
| if (p_acb->in_use) num_act_apps++; |
| } |
| |
| if (!num_act_apps) |
| { |
| bta_sys_remove_uuid(UUID_SERVCLASS_HDP_PROFILE); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_check_deregistration |
| ** |
| ** Description This function checks whether there is a pending deregistration |
| ** request or not |
| ** |
| ** Returns void |
| *******************************************************************************/ |
| void bta_hl_check_deregistration(UINT8 app_idx, tBTA_HL_DATA *p_data ) |
| { |
| tBTA_HL_APP_CB *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| tBTA_HL_MCL_CB *p_mcb; |
| UINT8 mcl_idx; |
| tBTA_HL evt_data; |
| |
| #if (BTA_HL_DEBUG == TRUE) |
| APPL_TRACE_DEBUG0("bta_hl_check_deregistration"); |
| #endif |
| |
| if (p_acb->deregistering) |
| { |
| if (bta_hl_find_an_in_use_mcl_idx(app_idx, &mcl_idx)) |
| { |
| p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx); |
| if (p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_CLOSE) |
| { |
| if (p_mcb->cch_state == BTA_HL_CCH_OPENING_ST) |
| p_mcb->force_close_local_cch_opening = TRUE; |
| p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_CLOSE; |
| APPL_TRACE_DEBUG1("p_mcb->force_close_local_cch_opening=%d", p_mcb->force_close_local_cch_opening ); |
| bta_hl_check_cch_close(app_idx,mcl_idx,p_data, TRUE); |
| } |
| } |
| else |
| { |
| /* all cchs are closed */ |
| evt_data.dereg_cfm.app_handle = p_acb->app_handle; |
| evt_data.dereg_cfm.app_id = p_data->api_dereg.app_id; |
| evt_data.dereg_cfm.status = BTA_HL_STATUS_OK; |
| p_acb->p_cback(BTA_HL_DEREGISTER_CFM_EVT, (tBTA_HL *) &evt_data ); |
| bta_hl_clean_app(app_idx); |
| bta_hl_check_disable(p_data); |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_check_disable |
| ** |
| ** Description This function checks whether there is a pending disable |
| ** request or not |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void bta_hl_check_disable(tBTA_HL_DATA *p_data ) |
| { |
| tBTA_HL_CB *p_cb= &bta_hl_cb; |
| tBTA_HL_APP_CB *p_acb; |
| UINT8 app_idx; |
| tBTA_HL_CTRL evt_data; |
| |
| #if (BTA_HL_DEBUG == TRUE) |
| APPL_TRACE_DEBUG0("bta_hl_check_disable"); |
| #endif |
| |
| if (bta_hl_cb.disabling) |
| { |
| if (bta_hl_find_an_in_use_app_idx(&app_idx)) |
| { |
| p_acb = BTA_HL_GET_APP_CB_PTR(app_idx); |
| if (!p_acb->deregistering) |
| { |
| p_acb->deregistering = TRUE; |
| bta_hl_check_deregistration(app_idx, p_data); |
| } |
| } |
| else |
| { |
| /* all apps are deregistered */ |
| bta_sys_deregister(BTA_ID_HL); |
| evt_data.disable_cfm.status = BTA_HL_STATUS_OK; |
| if (p_cb->p_ctrl_cback) p_cb->p_ctrl_cback(BTA_HL_CTRL_DISABLE_CFM_EVT, (tBTA_HL_CTRL *) &evt_data); |
| memset((void *) p_cb, 0, sizeof(tBTA_HL_CB)); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_abort_cfm |
| ** |
| ** Description This function builds the abort confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_abort_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_STATUS status) |
| { |
| p_evt_data->dch_abort_cfm.status = status; |
| p_evt_data->dch_abort_cfm.mcl_handle = mcl_handle; |
| p_evt_data->dch_abort_cfm.app_handle = app_handle; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_abort_ind |
| ** |
| ** Description This function builds the abort indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_abort_ind(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle) |
| { |
| p_evt_data->dch_abort_ind.mcl_handle = mcl_handle; |
| p_evt_data->dch_abort_ind.app_handle = app_handle; |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_close_cfm |
| ** |
| ** Description This function builds the close confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_dch_close_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_HANDLE mdl_handle, |
| tBTA_HL_STATUS status) |
| { |
| p_evt_data->dch_close_cfm.status = status; |
| p_evt_data->dch_close_cfm.mdl_handle = mdl_handle; |
| p_evt_data->dch_close_cfm.mcl_handle = mcl_handle; |
| p_evt_data->dch_close_cfm.app_handle = app_handle; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_dch_close_ind |
| ** |
| ** Description This function builds the close indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_dch_close_ind(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_HANDLE mdl_handle, |
| BOOLEAN intentional) |
| { |
| p_evt_data->dch_close_ind.mdl_handle = mdl_handle; |
| p_evt_data->dch_close_ind.mcl_handle = mcl_handle; |
| p_evt_data->dch_close_ind.app_handle = app_handle; |
| p_evt_data->dch_close_ind.intentional = intentional; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_send_data_cfm |
| ** |
| ** Description This function builds the send data confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_send_data_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_HANDLE mdl_handle, |
| tBTA_HL_STATUS status ) |
| { |
| |
| p_evt_data->dch_send_data_cfm.mdl_handle = mdl_handle; |
| p_evt_data->dch_send_data_cfm.mcl_handle = mcl_handle; |
| p_evt_data->dch_send_data_cfm.app_handle = app_handle; |
| p_evt_data->dch_send_data_cfm.status = status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_rcv_data_ind |
| ** |
| ** Description This function builds the received data indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_rcv_data_ind(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_HANDLE mdl_handle) |
| { |
| p_evt_data->dch_rcv_data_ind.mdl_handle = mdl_handle; |
| p_evt_data->dch_rcv_data_ind.mcl_handle = mcl_handle; |
| p_evt_data->dch_rcv_data_ind.app_handle = app_handle; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_cch_open_cfm |
| ** |
| ** Description This function builds the CCH open confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_cch_open_cfm(tBTA_HL *p_evt_data, |
| UINT8 app_id, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| BD_ADDR bd_addr, |
| tBTA_HL_STATUS status ) |
| { |
| p_evt_data->cch_open_cfm.app_id = app_id; |
| p_evt_data->cch_open_cfm.app_handle = app_handle; |
| p_evt_data->cch_open_cfm.mcl_handle = mcl_handle; |
| bdcpy(p_evt_data->cch_open_cfm.bd_addr, bd_addr); |
| p_evt_data->cch_open_cfm.status = status; |
| APPL_TRACE_DEBUG1("bta_hl_build_cch_open_cfm: status=%d",status); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_cch_open_ind |
| ** |
| ** Description This function builds the CCH open indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_cch_open_ind(tBTA_HL *p_evt_data, tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| BD_ADDR bd_addr ) |
| { |
| |
| p_evt_data->cch_open_ind.app_handle = app_handle; |
| p_evt_data->cch_open_ind.mcl_handle = mcl_handle; |
| bdcpy(p_evt_data->cch_open_ind.bd_addr, bd_addr); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_cch_close_cfm |
| ** |
| ** Description This function builds the CCH close confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_cch_close_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_STATUS status ) |
| { |
| p_evt_data->cch_close_cfm.mcl_handle = mcl_handle; |
| p_evt_data->cch_close_cfm.app_handle = app_handle; |
| p_evt_data->cch_close_cfm.status = status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_cch_close_ind |
| ** |
| ** Description This function builds the CCH colse indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_cch_close_ind(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| BOOLEAN intentional) |
| { |
| p_evt_data->cch_close_ind.mcl_handle = mcl_handle; |
| p_evt_data->cch_close_ind.app_handle = app_handle; |
| p_evt_data->cch_close_ind.intentional = intentional; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_dch_open_cfm |
| ** |
| ** Description This function builds the DCH open confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_dch_open_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_HANDLE mdl_handle, |
| tBTA_HL_MDEP_ID local_mdep_id, |
| tBTA_HL_MDL_ID mdl_id, |
| tBTA_HL_DCH_MODE dch_mode, |
| BOOLEAN first_reliable, |
| UINT16 mtu, |
| tBTA_HL_STATUS status) |
| |
| { |
| p_evt_data->dch_open_cfm.mdl_handle = mdl_handle; |
| p_evt_data->dch_open_cfm.mcl_handle = mcl_handle; |
| p_evt_data->dch_open_cfm.app_handle = app_handle; |
| p_evt_data->dch_open_cfm.local_mdep_id = local_mdep_id; |
| p_evt_data->dch_open_cfm.mdl_id = mdl_id; |
| p_evt_data->dch_open_cfm.dch_mode = dch_mode; |
| p_evt_data->dch_open_cfm.first_reliable = first_reliable; |
| p_evt_data->dch_open_cfm.mtu = mtu; |
| p_evt_data->dch_open_cfm.status = status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_sdp_query_cfm |
| ** |
| ** Description This function builds the SDP query indication event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_sdp_query_cfm(tBTA_HL *p_evt_data, |
| UINT8 app_id, |
| tBTA_HL_APP_HANDLE app_handle, |
| BD_ADDR bd_addr, |
| tBTA_HL_SDP *p_sdp, |
| tBTA_HL_STATUS status) |
| |
| { |
| APPL_TRACE_DEBUG2("bta_hl_build_sdp_query_cfm: app_id = %d, app_handle=%d", |
| app_id,app_handle); |
| p_evt_data->sdp_query_cfm.app_id = app_id; |
| p_evt_data->sdp_query_cfm.app_handle = app_handle; |
| bdcpy(p_evt_data->sdp_query_cfm.bd_addr, bd_addr); |
| p_evt_data->sdp_query_cfm.p_sdp = p_sdp; |
| p_evt_data->sdp_query_cfm.status = status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_delete_mdl_cfm |
| ** |
| ** Description This function builds the delete MDL confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_delete_mdl_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_MDL_ID mdl_id, |
| tBTA_HL_STATUS status) |
| |
| { |
| p_evt_data->delete_mdl_cfm.mcl_handle = mcl_handle; |
| p_evt_data->delete_mdl_cfm.app_handle = app_handle; |
| p_evt_data->delete_mdl_cfm.mdl_id = mdl_id; |
| p_evt_data->delete_mdl_cfm.status = status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_build_echo_test_cfm |
| ** |
| ** Description This function builds the echo test confirmation event data |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void bta_hl_build_echo_test_cfm(tBTA_HL *p_evt_data, |
| tBTA_HL_APP_HANDLE app_handle, |
| tBTA_HL_MCL_HANDLE mcl_handle, |
| tBTA_HL_STATUS status ) |
| { |
| p_evt_data->echo_test_cfm.mcl_handle = mcl_handle; |
| p_evt_data->echo_test_cfm.app_handle = app_handle; |
| p_evt_data->echo_test_cfm.status = status; |
| } |
| |
| |
| /***************************************************************************** |
| ** Debug Functions |
| *****************************************************************************/ |
| #if (BTA_HL_DEBUG == TRUE) |
| |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_status_code |
| ** |
| ** Description get the status string pointer |
| ** |
| ** Returns char * - status string pointer |
| ** |
| *******************************************************************************/ |
| char *bta_hl_status_code(tBTA_HL_STATUS status) |
| { |
| switch (status) |
| { |
| case BTA_HL_STATUS_OK: |
| return "BTA_HL_STATUS_OK"; |
| case BTA_HL_STATUS_FAIL: |
| return "BTA_HL_STATUS_FAIL"; |
| case BTA_HL_STATUS_ABORTED: |
| return "BTA_HL_STATUS_ABORTED"; |
| case BTA_HL_STATUS_NO_RESOURCE: |
| return "BTA_HL_STATUS_NO_RESOURCE"; |
| case BTA_HL_STATUS_LAST_ITEM: |
| return "BTA_HL_STATUS_LAST_ITEM"; |
| case BTA_HL_STATUS_DUPLICATE_APP_ID: |
| return "BTA_HL_STATUS_DUPLICATE_APP_ID"; |
| case BTA_HL_STATUS_INVALID_APP_HANDLE: |
| return "BTA_HL_STATUS_INVALID_APP_HANDLE"; |
| case BTA_HL_STATUS_INVALID_MCL_HANDLE: |
| return "BTA_HL_STATUS_INVALID_MCL_HANDLE"; |
| case BTA_HL_STATUS_MCAP_REG_FAIL: |
| return "BTA_HL_STATUS_MCAP_REG_FAIL"; |
| case BTA_HL_STATUS_MDEP_CO_FAIL: |
| return "BTA_HL_STATUS_MDEP_CO_FAIL"; |
| case BTA_HL_STATUS_ECHO_CO_FAIL: |
| return "BTA_HL_STATUS_ECHO_CO_FAIL"; |
| case BTA_HL_STATUS_MDL_CFG_CO_FAIL: |
| return "BTA_HL_STATUS_MDL_CFG_CO_FAIL"; |
| case BTA_HL_STATUS_SDP_NO_RESOURCE: |
| return "BTA_HL_STATUS_SDP_NO_RESOURCE"; |
| case BTA_HL_STATUS_SDP_FAIL: |
| return "BTA_HL_STATUS_SDP_FAIL"; |
| case BTA_HL_STATUS_NO_CCH: |
| return "BTA_HL_STATUS_NO_CCH"; |
| case BTA_HL_STATUS_NO_MCL: |
| return "BTA_HL_STATUS_NO_MCL"; |
| |
| case BTA_HL_STATUS_NO_FIRST_RELIABLE: |
| return "BTA_HL_STATUS_NO_FIRST_RELIABLE"; |
| case BTA_HL_STATUS_INVALID_DCH_CFG: |
| return "BTA_HL_STATUS_INVALID_DCH_CFG"; |
| case BTA_HL_STATUS_INVALID_BD_ADDR: |
| return "BTA_HL_STATUS_INVALID_BD_ADDR"; |
| case BTA_HL_STATUS_INVALID_RECONNECT_CFG: |
| return "BTA_HL_STATUS_INVALID_RECONNECT_CFG"; |
| case BTA_HL_STATUS_ECHO_TEST_BUSY: |
| return "BTA_HL_STATUS_ECHO_TEST_BUSY"; |
| case BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID: |
| return "BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID"; |
| case BTA_HL_STATUS_INVALID_MDL_ID: |
| return "BTA_HL_STATUS_INVALID_MDL_ID"; |
| case BTA_HL_STATUS_NO_MDL_ID_FOUND: |
| return "BTA_HL_STATUS_NO_MDL_ID_FOUND"; |
| case BTA_HL_STATUS_DCH_BUSY: |
| return "BTA_HL_STATUS_DCH_BUSY"; |
| default: |
| return "Unknown status code"; |
| } |
| } |
| /******************************************************************************* |
| ** |
| ** Function bta_hl_evt_code |
| ** |
| ** Description Maps HL event code to the corresponding event string |
| ** |
| ** Returns string pointer for the associated event name |
| ** |
| *******************************************************************************/ |
| char *bta_hl_evt_code(tBTA_HL_INT_EVT evt_code) |
| { |
| switch (evt_code) |
| { |
| case BTA_HL_CCH_OPEN_EVT: |
| return "BTA_HL_CCH_OPEN_EVT"; |
| case BTA_HL_CCH_SDP_OK_EVT: |
| return "BTA_HL_CCH_SDP_OK_EVT"; |
| case BTA_HL_CCH_SDP_FAIL_EVT: |
| return "BTA_HL_CCH_SDP_FAIL_EVT"; |
| case BTA_HL_MCA_CONNECT_IND_EVT: |
| return "BTA_HL_MCA_CONNECT_IND_EVT"; |
| case BTA_HL_MCA_DISCONNECT_IND_EVT: |
| return "BTA_HL_MCA_DISCONNECT_IND_EVT"; |
| |
| case BTA_HL_CCH_CLOSE_EVT: |
| return "BTA_HL_CCH_CLOSE_EVT"; |
| case BTA_HL_CCH_CLOSE_CMPL_EVT: |
| return "BTA_HL_CCH_CLOSE_CMPL_EVT"; |
| case BTA_HL_DCH_OPEN_EVT: |
| return "BTA_HL_DCH_OPEN_EVT"; |
| case BTA_HL_MCA_CREATE_IND_EVT: |
| return "BTA_HL_MCA_CREATE_IND_EVT"; |
| case BTA_HL_MCA_CREATE_CFM_EVT: |
| return "BTA_HL_MCA_CREATE_CFM_EVT"; |
| case BTA_HL_MCA_OPEN_IND_EVT: |
| return "BTA_HL_MCA_OPEN_IND_EVT"; |
| case BTA_HL_MCA_OPEN_CFM_EVT: |
| return "BTA_HL_MCA_OPEN_CFM_EVT"; |
| case BTA_HL_DCH_CLOSE_EVT: |
| return "BTA_HL_DCH_CLOSE_EVT"; |
| case BTA_HL_MCA_CLOSE_IND_EVT: |
| return "BTA_HL_MCA_CLOSE_IND_EVT"; |
| case BTA_HL_MCA_CLOSE_CFM_EVT: |
| return "BTA_HL_MCA_CLOSE_CFM_EVT"; |
| case BTA_HL_API_SEND_DATA_EVT: |
| return "BTA_HL_API_SEND_DATA_EVT"; |
| case BTA_HL_MCA_RCV_DATA_EVT: |
| return "BTA_HL_MCA_RCV_DATA_EVT"; |
| case BTA_HL_DCH_CLOSE_CMPL_EVT: |
| return "BTA_HL_DCH_CLOSE_CMPL_EVT"; |
| |
| case BTA_HL_API_ENABLE_EVT: |
| return "BTA_HL_API_ENABLE_EVT"; |
| case BTA_HL_API_DISABLE_EVT: |
| return "BTA_HL_API_DISABLE_EVT"; |
| case BTA_HL_API_UPDATE_EVT: |
| return "BTA_HL_API_UPDATE_EVT"; |
| case BTA_HL_API_REGISTER_EVT: |
| return "BTA_HL_API_REGISTER_EVT"; |
| case BTA_HL_API_DEREGISTER_EVT: |
| return "BTA_HL_API_DEREGISTER_EVT"; |
| |
| case BTA_HL_API_CCH_OPEN_EVT: |
| return "BTA_HL_API_CCH_OPEN_EVT"; |
| |
| case BTA_HL_API_CCH_CLOSE_EVT: |
| return "BTA_HL_API_CCH_CLOSE_EVT"; |
| case BTA_HL_API_DCH_OPEN_EVT: |
| return "BTA_HL_API_DCH_OPEN_EVT"; |
| |
| case BTA_HL_API_DCH_RECONNECT_EVT: |
| return "BTA_HL_API_DCH_RECONNECT_EVT"; |
| case BTA_HL_API_DCH_CLOSE_EVT: |
| return "BTA_HL_API_DCH_CLOSE_EVT"; |
| case BTA_HL_API_DELETE_MDL_EVT: |
| return "BTA_HL_API_DELETE_MDL_EVT"; |
| case BTA_HL_API_DCH_ABORT_EVT: |
| return "BTA_HL_API_DCH_ABORT_EVT"; |
| |
| case BTA_HL_DCH_RECONNECT_EVT: |
| return "BTA_HL_DCH_RECONNECT_EVT"; |
| case BTA_HL_DCH_SDP_INIT_EVT: |
| return "BTA_HL_DCH_SDP_INIT_EVT"; |
| case BTA_HL_DCH_SDP_FAIL_EVT: |
| return "BTA_HL_DCH_SDP_FAIL_EVT"; |
| case BTA_HL_API_DCH_ECHO_TEST_EVT: |
| return "BTA_HL_API_DCH_ECHO_TEST_EVT"; |
| case BTA_HL_DCH_CLOSE_ECHO_TEST_EVT: |
| return "BTA_HL_DCH_CLOSE_ECHO_TEST_EVT"; |
| case BTA_HL_MCA_RECONNECT_IND_EVT: |
| return "BTA_HL_MCA_RECONNECT_IND_EVT"; |
| case BTA_HL_MCA_RECONNECT_CFM_EVT: |
| return "BTA_HL_MCA_RECONNECT_CFM_EVT"; |
| case BTA_HL_API_DCH_CREATE_RSP_EVT: |
| return "BTA_HL_API_DCH_CREATE_RSP_EVT"; |
| case BTA_HL_DCH_ABORT_EVT: |
| return "BTA_HL_DCH_ABORT_EVT"; |
| case BTA_HL_MCA_ABORT_IND_EVT: |
| return "BTA_HL_MCA_ABORT_IND_EVT"; |
| case BTA_HL_MCA_ABORT_CFM_EVT: |
| return "BTA_HL_MCA_ABORT_CFM_EVT"; |
| case BTA_HL_MCA_DELETE_IND_EVT: |
| return "BTA_HL_MCA_DELETE_IND_EVT"; |
| case BTA_HL_MCA_DELETE_CFM_EVT: |
| return "BTA_HL_MCA_DELETE_CFM_EVT"; |
| case BTA_HL_MCA_CONG_CHG_EVT: |
| return "BTA_HL_MCA_CONG_CHG_EVT"; |
| case BTA_HL_CI_GET_TX_DATA_EVT: |
| return "BTA_HL_CI_GET_TX_DATA_EVT"; |
| case BTA_HL_CI_PUT_RX_DATA_EVT: |
| return "BTA_HL_CI_PUT_RX_DATA_EVT"; |
| case BTA_HL_CI_GET_ECHO_DATA_EVT: |
| return "BTA_HL_CI_GET_ECHO_DATA_EVT"; |
| case BTA_HL_DCH_ECHO_TEST_EVT: |
| return "BTA_HL_DCH_ECHO_TEST_EVT"; |
| case BTA_HL_CI_PUT_ECHO_DATA_EVT: |
| return "BTA_HL_CI_PUT_ECHO_DATA_EVT"; |
| case BTA_HL_API_SDP_QUERY_EVT: |
| return "BTA_HL_API_SDP_QUERY_EVT"; |
| case BTA_HL_SDP_QUERY_OK_EVT: |
| return "BTA_HL_SDP_QUERY_OK_EVT"; |
| case BTA_HL_SDP_QUERY_FAIL_EVT: |
| return "BTA_HL_SDP_QUERY_FAIL_EVT"; |
| case BTA_HL_MCA_RSP_TOUT_IND_EVT: |
| return "BTA_HL_MCA_RSP_TOUT_IND_EVT"; |
| |
| default: |
| return "Unknown HL event code"; |
| } |
| } |
| |
| #endif /* Debug Functions */ |
| #endif // HL_INCLUDED |
| |
| |
| |
| |
| |
| |
| |
| |