blob: 0c811b46079b7207d5f57c9579281f663f2d1199 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2004-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains functions for managing the SCO connection used in AG.
*
******************************************************************************/
#include "bta_api.h"
#include "bta_ag_api.h"
#include "bta_ag_co.h"
#if (BTM_SCO_HCI_INCLUDED == TRUE )
#include "bta_dm_co.h"
#endif
#include "bta_ag_int.h"
#include "btm_api.h"
#include "gki.h"
#ifndef BTA_AG_SCO_DEBUG
#define BTA_AG_SCO_DEBUG FALSE
#endif
#ifndef BTA_AG_CODEC_NEGO_TIMEOUT
#define BTA_AG_CODEC_NEGO_TIMEOUT 3000
#endif
#if BTA_AG_SCO_DEBUG == TRUE
static char *bta_ag_sco_evt_str(UINT8 event);
static char *bta_ag_sco_state_str(UINT8 state);
#endif
#define BTA_AG_NO_EDR_ESCO (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 | \
BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | \
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | \
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5)
/* sco events */
enum
{
BTA_AG_SCO_LISTEN_E, /* listen request */
BTA_AG_SCO_OPEN_E, /* open request */
BTA_AG_SCO_XFER_E, /* transfer request */
#if (BTM_WBS_INCLUDED == TRUE )
BTA_AG_SCO_CN_DONE_E, /* codec negotiation done */
BTA_AG_SCO_REOPEN_E, /* Retry with other codec when failed */
#endif
BTA_AG_SCO_CLOSE_E, /* close request */
BTA_AG_SCO_SHUTDOWN_E, /* shutdown request */
BTA_AG_SCO_CONN_OPEN_E, /* sco open */
BTA_AG_SCO_CONN_CLOSE_E, /* sco closed */
BTA_AG_SCO_CI_DATA_E /* SCO data ready */
};
#if (BTM_WBS_INCLUDED == TRUE )
#define BTA_AG_NUM_CODECS 2
static const tBTM_ESCO_PARAMS bta_ag_esco_params[BTA_AG_NUM_CODECS] =
{
/* CVSD */
{
BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */
BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */
0x000a, /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */
BTM_VOICE_SETTING_CVSD, /* Inp Linear, Air CVSD, 2s Comp, 16bit */
(BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */
BTM_SCO_PKT_TYPES_MASK_HV2 +
BTM_SCO_PKT_TYPES_MASK_HV3 +
BTM_SCO_PKT_TYPES_MASK_EV3 +
BTM_SCO_PKT_TYPES_MASK_EV4 +
BTM_SCO_PKT_TYPES_MASK_EV5 +
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 +
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
BTM_ESCO_RETRANS_POWER /* Retransmission effort */
},
/* mSBC */
{
BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec), 8000 */
BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec), 8000 */
13, /* 13 ms */
BTM_VOICE_SETTING_TRANS, /* Inp Linear, Transparent, 2s Comp, 16bit */
(BTM_SCO_PKT_TYPES_MASK_EV3 | /* Packet Types : EV3 + 2-EV3 */
BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 |
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
BTM_ESCO_RETRANS_QUALITY /* Retransmission effort */
}
};
#else
static const tBTM_ESCO_PARAMS bta_ag_esco_params =
{
BTM_64KBITS_RATE, /* TX Bandwidth (64 kbits/sec) */
BTM_64KBITS_RATE, /* RX Bandwidth (64 kbits/sec) */
0x000a, /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3) */
0x0060, /* Inp Linear, Air CVSD, 2s Comp, 16bit */
(BTM_SCO_PKT_TYPES_MASK_HV1 + /* Packet Types */
BTM_SCO_PKT_TYPES_MASK_HV2 +
BTM_SCO_PKT_TYPES_MASK_HV3 +
BTM_SCO_PKT_TYPES_MASK_EV3 +
BTM_SCO_PKT_TYPES_MASK_EV4 +
BTM_SCO_PKT_TYPES_MASK_EV5 +
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 +
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
BTM_ESCO_RETRANS_POWER /* Retransmission effort */
};
#endif
/*******************************************************************************
**
** Function bta_ag_sco_conn_cback
**
** Description BTM SCO connection callback.
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_sco_conn_cback(UINT16 sco_idx)
{
UINT16 handle;
BT_HDR *p_buf;
tBTA_AG_SCB *p_scb;
/* match callback to scb; first check current sco scb */
if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use)
{
handle = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb);
}
/* then check for scb connected to this peer */
else
{
/* Check if SLC is up */
handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_idx));
p_scb = bta_ag_scb_by_idx(handle);
if(p_scb && !p_scb->svc_conn)
handle = 0;
}
if (handle != 0)
{
if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
{
p_buf->event = BTA_AG_SCO_OPEN_EVT;
p_buf->layer_specific = handle;
bta_sys_sendmsg(p_buf);
}
}
/* no match found; disconnect sco, init sco variables */
else
{
bta_ag_cb.sco.p_curr_scb = NULL;
bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST;
BTM_RemoveSco(sco_idx);
}
}
/*******************************************************************************
**
** Function bta_ag_sco_disc_cback
**
** Description BTM SCO disconnection callback.
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_sco_disc_cback(UINT16 sco_idx)
{
BT_HDR *p_buf;
UINT16 handle = 0;
APPL_TRACE_DEBUG3 ("bta_ag_sco_disc_cback(): sco_idx: 0x%x p_cur_scb: 0x%08x sco.state: %d", sco_idx, bta_ag_cb.sco.p_curr_scb, bta_ag_cb.sco.state);
APPL_TRACE_DEBUG4 ("bta_ag_sco_disc_cback(): scb[0] addr: 0x%08x in_use: %u sco_idx: 0x%x sco state: %u",
&bta_ag_cb.scb[0], bta_ag_cb.scb[0].in_use, bta_ag_cb.scb[0].sco_idx, bta_ag_cb.scb[0].state);
APPL_TRACE_DEBUG4 ("bta_ag_sco_disc_cback(): scb[1] addr: 0x%08x in_use: %u sco_idx: 0x%x sco state: %u",
&bta_ag_cb.scb[1], bta_ag_cb.scb[1].in_use, bta_ag_cb.scb[1].sco_idx, bta_ag_cb.scb[1].state);
/* match callback to scb */
if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use)
{
/* We only care about callbacks for the active SCO */
if (bta_ag_cb.sco.p_curr_scb->sco_idx != sco_idx)
{
if (bta_ag_cb.sco.p_curr_scb->sco_idx != 0xFFFF)
return;
}
handle = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb);
}
if (handle != 0)
{
#if (BTM_SCO_HCI_INCLUDED == TRUE )
tBTM_STATUS status = BTM_ConfigScoPath(BTM_SCO_ROUTE_PCM, NULL, NULL, TRUE);
APPL_TRACE_DEBUG1("bta_ag_sco_disc_cback sco close config status = %d", status);
/* SCO clean up here */
bta_dm_sco_co_close();
#endif
#if (BTM_WBS_INCLUDED == TRUE )
/* Restore settings */
if(bta_ag_cb.sco.p_curr_scb->inuse_codec == BTA_AG_CODEC_MSBC)
{
BTM_SetWBSCodec (BTM_SCO_CODEC_NONE);
BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD);
/* If SCO open was initiated by AG and failed for mSBC, try CVSD again. */
if (bta_ag_sco_is_opening (bta_ag_cb.sco.p_curr_scb))
{
bta_ag_cb.sco.p_curr_scb->codec_fallback = TRUE;
APPL_TRACE_DEBUG0("Fallback to CVSD");
}
}
bta_ag_cb.sco.p_curr_scb->inuse_codec = BTA_AG_CODEC_NONE;
#endif
if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
{
p_buf->event = BTA_AG_SCO_CLOSE_EVT;
p_buf->layer_specific = handle;
bta_sys_sendmsg(p_buf);
}
}
/* no match found */
else
{
APPL_TRACE_DEBUG0("no scb for ag_sco_disc_cback");
/* sco could be closed after scb dealloc'ed */
if (bta_ag_cb.sco.p_curr_scb != NULL)
{
bta_ag_cb.sco.p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
bta_ag_cb.sco.p_curr_scb = NULL;
bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST;
}
}
}
#if (BTM_SCO_HCI_INCLUDED == TRUE )
/*******************************************************************************
**
** Function bta_ag_sco_read_cback
**
** Description Callback function is the callback function for incoming
** SCO data over HCI.
**
** Returns void
**
*******************************************************************************/
static void bta_ag_sco_read_cback (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status)
{
if (status != BTM_SCO_DATA_CORRECT)
{
APPL_TRACE_DEBUG1("bta_ag_sco_read_cback: status(%d)", status);
}
/* Callout function must free the data. */
bta_dm_sco_co_in_data (p_data, status);
}
#endif
/*******************************************************************************
**
** Function bta_ag_remove_sco
**
** Description Removes the specified SCO from the system.
** If only_active is TRUE, then SCO is only removed if connected
**
** Returns BOOLEAN - TRUE if Sco removal was started
**
*******************************************************************************/
static BOOLEAN bta_ag_remove_sco(tBTA_AG_SCB *p_scb, BOOLEAN only_active)
{
BOOLEAN removed_started = FALSE;
tBTM_STATUS status;
if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
{
if (!only_active || p_scb->sco_idx == bta_ag_cb.sco.cur_idx)
{
status = BTM_RemoveSco(p_scb->sco_idx);
APPL_TRACE_DEBUG2("ag remove sco: inx 0x%04x, status:0x%x", p_scb->sco_idx, status);
if (status == BTM_CMD_STARTED)
{
/* Sco is connected; set current control block */
bta_ag_cb.sco.p_curr_scb = p_scb;
removed_started = TRUE;
}
/* If no connection reset the sco handle */
else if ( (status == BTM_SUCCESS) || (status == BTM_UNKNOWN_ADDR) )
{
p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
}
}
}
return removed_started;
}
/*******************************************************************************
**
** Function bta_ag_esco_connreq_cback
**
** Description BTM eSCO connection requests and eSCO change requests
** Only the connection requests are processed by BTA.
**
** Returns void
**
*******************************************************************************/
static void bta_ag_esco_connreq_cback(tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data)
{
tBTA_AG_SCB *p_scb;
UINT16 handle;
UINT16 sco_inx = p_data->conn_evt.sco_inx;
/* Only process connection requests */
if (event == BTM_ESCO_CONN_REQ_EVT)
{
if ((handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_inx))) != 0 &&
((p_scb = bta_ag_scb_by_idx(handle)) != NULL) && p_scb->svc_conn)
{
p_scb->sco_idx = sco_inx;
/* If no other SCO active, allow this one */
if (!bta_ag_cb.sco.p_curr_scb)
{
APPL_TRACE_EVENT1("bta_ag_esco_connreq_cback: Accept Conn Request (sco_inx 0x%04x)", sco_inx);
bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt);
bta_ag_cb.sco.state = BTA_AG_SCO_OPENING_ST;
bta_ag_cb.sco.p_curr_scb = p_scb;
bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
}
else /* Begin a transfer: Close current SCO before responding */
{
APPL_TRACE_DEBUG0("bta_ag_esco_connreq_cback: Begin XFER");
bta_ag_cb.sco.p_xfer_scb = p_scb;
bta_ag_cb.sco.conn_data = p_data->conn_evt;
bta_ag_cb.sco.state = BTA_AG_SCO_OPEN_XFER_ST;
if (!bta_ag_remove_sco(bta_ag_cb.sco.p_curr_scb, TRUE))
{
APPL_TRACE_ERROR1("bta_ag_esco_connreq_cback: Nothing to remove so accept Conn Request (sco_inx 0x%04x)", sco_inx);
bta_ag_cb.sco.p_xfer_scb = NULL;
bta_ag_cb.sco.state = BTA_AG_SCO_LISTEN_ST;
bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt);
}
}
}
/* If error occurred send reject response immediately */
else
{
APPL_TRACE_WARNING0("no scb for bta_ag_esco_connreq_cback or no resources");
BTM_EScoConnRsp(p_data->conn_evt.sco_inx, HCI_ERR_HOST_REJECT_RESOURCES, NULL);
}
}
/* Received a change in the esco link */
else if (event == BTM_ESCO_CHG_EVT)
{
APPL_TRACE_EVENT5("eSCO change event (inx %d): rtrans %d, rxlen %d, txlen %d, txint %d",
p_data->chg_evt.sco_inx,
p_data->chg_evt.retrans_window, p_data->chg_evt.rx_pkt_len,
p_data->chg_evt.tx_pkt_len, p_data->chg_evt.tx_interval);
}
}
/*******************************************************************************
**
** Function bta_ag_cback_sco
**
** Description Call application callback function with SCO event.
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_cback_sco(tBTA_AG_SCB *p_scb, UINT8 event)
{
tBTA_AG_HDR sco;
sco.handle = bta_ag_scb_to_idx(p_scb);
sco.app_id = p_scb->app_id;
/* call close cback */
(*bta_ag_cb.p_cback)(event, (tBTA_AG *) &sco);
}
/*******************************************************************************
**
** Function bta_ag_create_sco
**
** Description
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_create_sco(tBTA_AG_SCB *p_scb, BOOLEAN is_orig)
{
tBTM_STATUS status;
UINT8 *p_bd_addr = NULL;
tBTM_ESCO_PARAMS params;
#if (BTM_WBS_INCLUDED == TRUE )
tBTA_AG_PEER_CODEC esco_codec = BTM_SCO_CODEC_CVSD;
int codec_index = 0;
#endif
#if (BTM_SCO_HCI_INCLUDED == TRUE )
tBTM_SCO_ROUTE_TYPE sco_route;
tBTA_CODEC_INFO codec_info = {BTA_SCO_CODEC_PCM};
UINT32 pcm_sample_rate;
#endif
/* Make sure this sco handle is not already in use */
if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
{
APPL_TRACE_WARNING1("bta_ag_create_sco: Index 0x%04x Already In Use!",
p_scb->sco_idx);
return;
}
#if (BTM_WBS_INCLUDED == TRUE )
if ((p_scb->sco_codec == BTM_SCO_CODEC_MSBC) &&
!p_scb->codec_fallback &&
!p_scb->retry_with_sco_only)
esco_codec = BTM_SCO_CODEC_MSBC;
if (p_scb->codec_fallback)
{
p_scb->codec_fallback = FALSE;
/* Force AG to send +BCS for the next audio connection. */
p_scb->codec_updated = TRUE;
}
if (esco_codec == BTM_SCO_CODEC_MSBC)
codec_index = esco_codec - 1;
params = bta_ag_esco_params[codec_index];
#else
params = bta_ag_esco_params;
#endif
if(bta_ag_cb.sco.param_updated) /* If we do not use the default parameters */
params = bta_ag_cb.sco.params;
if(!bta_ag_cb.sco.param_updated)
{
#if (BTM_WBS_INCLUDED == TRUE)
if (!codec_index) /* For non-WBS */
#endif
{
/* Use the application packet types (5 slot EV packets not allowed) */
params.packet_types = p_bta_ag_cfg->sco_pkt_types |
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5;
}
}
/* if initiating set current scb and peer bd addr */
if (is_orig)
{
/* Attempt to use eSCO if remote host supports HFP >= 1.5 */
/* Need to find out from SIG if HSP can use eSCO; for now use SCO */
if (p_scb->conn_service == BTA_AG_HFP && p_scb->peer_version >= HFP_VERSION_1_5 && !p_scb->retry_with_sco_only)
{
BTM_SetEScoMode(BTM_LINK_TYPE_ESCO, &params);
/* If ESCO or EDR ESCO, retry with SCO only in case of failure */
if((params.packet_types & BTM_ESCO_LINK_ONLY_MASK)
||!((params.packet_types & ~(BTM_ESCO_LINK_ONLY_MASK | BTM_SCO_LINK_ONLY_MASK)) ^ BTA_AG_NO_EDR_ESCO))
{
#if (BTM_WBS_INCLUDED == TRUE )
if (esco_codec != BTA_AG_CODEC_MSBC)
{
p_scb->retry_with_sco_only = TRUE;
APPL_TRACE_API0("Setting retry_with_sco_only to TRUE");
}
else /* Do not use SCO when using mSBC */
{
p_scb->retry_with_sco_only = FALSE;
APPL_TRACE_API0("Setting retry_with_sco_only to FALSE");
}
#else
p_scb->retry_with_sco_only = TRUE;
APPL_TRACE_API0("Setting retry_with_sco_only to TRUE");
#endif
}
}
else
{
if(p_scb->retry_with_sco_only)
APPL_TRACE_API0("retrying with SCO only");
p_scb->retry_with_sco_only = FALSE;
BTM_SetEScoMode(BTM_LINK_TYPE_SCO, &params);
}
bta_ag_cb.sco.p_curr_scb = p_scb;
/* tell sys to stop av if any */
bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
/* Allow any platform specific pre-SCO set up to take place */
bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_SETUP);
#if (BTM_SCO_HCI_INCLUDED == TRUE )
#if (BTM_WBS_INCLUDED == TRUE)
if (esco_codec == BTA_AG_CODEC_MSBC)
pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_16K;
else
#endif
pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K;
sco_route = bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id);
#endif
#if (BTM_WBS_INCLUDED == TRUE )
if (esco_codec == BTA_AG_CODEC_MSBC)
{
/* Enable mSBC codec in fw */
BTM_SetWBSCodec (esco_codec);
}
/* Specify PCM input for SBC codec in fw */
BTM_ConfigI2SPCM (esco_codec, (UINT8)HCI_BRCM_I2SPCM_IS_DEFAULT_ROLE, (UINT8)HCI_BRCM_I2SPCM_SAMPLE_DEFAULT, (UINT8)HCI_BRCM_I2SPCM_CLOCK_DEFAULT);
/* This setting may not be necessary */
/* To be verified with stable 2049 boards */
if (esco_codec == BTA_AG_CODEC_MSBC)
BTM_WriteVoiceSettings (BTM_VOICE_SETTING_TRANS);
else
BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD);
/* save the current codec because sco_codec can be updated while SCO is open. */
p_scb->inuse_codec = esco_codec;
#endif
#if (BTM_SCO_HCI_INCLUDED == TRUE )
/* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */
BTM_ConfigScoPath(sco_route, bta_ag_sco_read_cback, NULL, TRUE);
#endif
bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
}
else
p_scb->retry_with_sco_only = FALSE;
p_bd_addr = p_scb->peer_addr;
status = BTM_CreateSco(p_bd_addr, is_orig, params.packet_types,
&p_scb->sco_idx, bta_ag_sco_conn_cback,
bta_ag_sco_disc_cback);
if (status == BTM_CMD_STARTED)
{
if (!is_orig)
{
BTM_RegForEScoEvts(p_scb->sco_idx, bta_ag_esco_connreq_cback);
}
else /* Initiating the connection, set the current sco handle */
{
bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
}
}
APPL_TRACE_API4("ag create sco: orig %d, inx 0x%04x, status 0x%x, pkt types 0x%04x",
is_orig, p_scb->sco_idx, status, params.packet_types);
}
#if (BTM_WBS_INCLUDED == TRUE )
/*******************************************************************************
**
** Function bta_ag_cn_timer_cback
**
** Description
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_cn_timer_cback (TIMER_LIST_ENT *p_tle)
{
tBTA_AG_SCB *p_scb;
if (p_tle)
{
p_scb = (tBTA_AG_SCB *)p_tle->param;
if (p_scb)
{
/* Announce that codec negotiation failed. */
bta_ag_sco_codec_nego(p_scb, FALSE);
/* call app callback */
bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT);
}
}
}
/*******************************************************************************
**
** Function bta_ag_codec_negotiate
**
** Description Initiate codec negotiation by sending AT command.
** If not necessary, skip negotiation.
**
** Returns void
**
*******************************************************************************/
void bta_ag_codec_negotiate(tBTA_AG_SCB *p_scb)
{
bta_ag_cb.sco.p_curr_scb = p_scb;
if (p_scb->codec_updated || p_scb->codec_fallback)
{
/* Change the power mode to Active until sco open is completed. */
bta_sys_busy(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
/* Send +BCS to the peer */
bta_ag_send_bcs(p_scb, NULL);
/* Start timer to handle timeout */
p_scb->cn_timer.p_cback = (TIMER_CBACK*)&bta_ag_cn_timer_cback;
p_scb->cn_timer.param = (INT32)p_scb;
bta_sys_start_timer(&p_scb->cn_timer, 0, BTA_AG_CODEC_NEGO_TIMEOUT);
}
else
{
/* use same codec type as previous SCO connection, skip codec negotiation */
bta_ag_sco_codec_nego(p_scb, TRUE);
}
}
#endif
/*******************************************************************************
**
** Function bta_ag_sco_event
**
** Description
**
**
** Returns void
**
*******************************************************************************/
static void bta_ag_sco_event(tBTA_AG_SCB *p_scb, UINT8 event)
{
tBTA_AG_SCO_CB *p_sco = &bta_ag_cb.sco;
#if (BTM_WBS_INCLUDED == TRUE )
tBTA_AG_SCB *p_cn_scb = NULL; /* For codec negotiation */
#endif
#if (BTM_SCO_HCI_INCLUDED == TRUE )
BT_HDR *p_buf;
#endif
#if BTA_AG_SCO_DEBUG == TRUE
UINT8 in_state = p_sco->state;
APPL_TRACE_EVENT5("BTA ag sco evt (hdl 0x%04x): State %d (%s), Event %d (%s)",
p_scb->sco_idx,
p_sco->state, bta_ag_sco_state_str(p_sco->state),
event, bta_ag_sco_evt_str(event));
#else
APPL_TRACE_EVENT3("BTA ag sco evt (hdl 0x%04x): State %d, Event %d",
p_scb->sco_idx, p_sco->state, event);
#endif
#if (BTM_SCO_HCI_INCLUDED == TRUE )
if (event == BTA_AG_SCO_CI_DATA_E)
{
while (TRUE)
{
bta_dm_sco_co_out_data(&p_buf);
if (p_buf)
{
if (p_sco->state == BTA_AG_SCO_OPEN_ST)
BTM_WriteScoData(p_sco->p_curr_scb->sco_idx, p_buf);
else
GKI_freebuf(p_buf);
}
else
break;
}
return;
}
#endif
switch (p_sco->state)
{
case BTA_AG_SCO_SHUTDOWN_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_SHUTDOWN_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_LISTEN_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection (Additional channel) */
bta_ag_create_sco(p_scb, FALSE);
break;
case BTA_AG_SCO_OPEN_E:
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
#if (BTM_WBS_INCLUDED == TRUE )
/* start codec negotiation */
p_sco->state = BTA_AG_SCO_CODEC_ST;
p_cn_scb = p_scb;
#else
/* create sco connection to peer */
bta_ag_create_sco(p_scb, TRUE);
p_sco->state = BTA_AG_SCO_OPENING_ST;
#endif
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
if (p_scb == p_sco->p_curr_scb)
p_sco->p_curr_scb = NULL;
/* If last SCO instance then finish shutting down */
if (!bta_ag_other_scb_open(p_scb))
{
p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
}
break;
case BTA_AG_SCO_CLOSE_E:
/* remove listening connection */
/* Ignore the event. We need to keep listening SCO for the active SLC */
APPL_TRACE_WARNING1("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event);
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* sco failed; create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event);
break;
}
break;
#if (BTM_WBS_INCLUDED == TRUE )
case BTA_AG_SCO_CODEC_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection (Additional channel) */
bta_ag_create_sco(p_scb, FALSE);
break;
case BTA_AG_SCO_CN_DONE_E:
/* create sco connection to peer */
bta_ag_create_sco(p_scb, TRUE);
p_sco->state = BTA_AG_SCO_OPENING_ST;
break;
case BTA_AG_SCO_XFER_E:
/* save xfer scb */
p_sco->p_xfer_scb = p_scb;
p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
if (p_scb == p_sco->p_curr_scb)
p_sco->p_curr_scb = NULL;
/* If last SCO instance then finish shutting down */
if (!bta_ag_other_scb_open(p_scb))
{
p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
}
break;
case BTA_AG_SCO_CLOSE_E:
/* sco open is not started yet. just go back to listening */
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* sco failed; create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_CODEC_ST: Ignoring event %d", event);
break;
}
break;
#endif
case BTA_AG_SCO_OPENING_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* second headset has now joined */
/* create sco listen connection (Additional channel) */
if (p_scb != p_sco->p_curr_scb)
{
bta_ag_create_sco(p_scb, FALSE);
}
break;
#if (BTM_WBS_INCLUDED == TRUE)
case BTA_AG_SCO_REOPEN_E:
/* start codec negotiation */
p_sco->state = BTA_AG_SCO_CODEC_ST;
p_cn_scb = p_scb;
break;
#endif
case BTA_AG_SCO_XFER_E:
/* save xfer scb */
p_sco->p_xfer_scb = p_scb;
p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
break;
case BTA_AG_SCO_CLOSE_E:
p_sco->state = BTA_AG_SCO_OPEN_CL_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* If not opening scb, just close it */
if (p_scb != p_sco->p_curr_scb)
{
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
}
else
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_OPEN_E:
p_sco->state = BTA_AG_SCO_OPEN_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* sco failed; create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_OPENING_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_OPEN_CL_ST:
switch (event)
{
case BTA_AG_SCO_XFER_E:
/* save xfer scb */
p_sco->p_xfer_scb = p_scb;
p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
break;
case BTA_AG_SCO_OPEN_E:
p_sco->state = BTA_AG_SCO_OPENING_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* If not opening scb, just close it */
if (p_scb != p_sco->p_curr_scb)
{
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
}
else
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_OPEN_E:
/* close sco connection */
bta_ag_remove_sco(p_scb, TRUE);
p_sco->state = BTA_AG_SCO_CLOSING_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* sco failed; create sco listen connection */
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_CL_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_OPEN_XFER_ST:
switch (event)
{
case BTA_AG_SCO_CLOSE_E:
/* close sco connection */
bta_ag_remove_sco(p_scb, TRUE);
p_sco->state = BTA_AG_SCO_CLOSING_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* remove all connection */
bta_ag_remove_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* closed sco; place in listen mode and
accept the transferred connection */
bta_ag_create_sco(p_scb, FALSE); /* Back into listen mode */
/* Accept sco connection with xfer scb */
bta_ag_sco_conn_rsp(p_sco->p_xfer_scb, &p_sco->conn_data);
p_sco->state = BTA_AG_SCO_OPENING_ST;
p_sco->p_curr_scb = p_sco->p_xfer_scb;
p_sco->cur_idx = p_sco->p_xfer_scb->sco_idx;
p_sco->p_xfer_scb = NULL;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_XFER_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_OPEN_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* second headset has now joined */
/* create sco listen connection (Additional channel) */
if (p_scb != p_sco->p_curr_scb)
{
bta_ag_create_sco(p_scb, FALSE);
}
break;
case BTA_AG_SCO_XFER_E:
/* close current sco connection */
bta_ag_remove_sco(p_sco->p_curr_scb, TRUE);
/* save xfer scb */
p_sco->p_xfer_scb = p_scb;
p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
break;
case BTA_AG_SCO_CLOSE_E:
/* close sco connection if active */
if (bta_ag_remove_sco(p_scb, TRUE))
{
p_sco->state = BTA_AG_SCO_CLOSING_ST;
}
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* remove all listening connections */
bta_ag_remove_sco(p_scb, FALSE);
/* If SCO was active on this scb, close it */
if (p_scb == p_sco->p_curr_scb)
{
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
}
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* peer closed sco; create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_CLOSING_ST:
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection (Additional channel) */
if (p_scb != p_sco->p_curr_scb)
{
bta_ag_create_sco(p_scb, FALSE);
}
break;
case BTA_AG_SCO_OPEN_E:
p_sco->state = BTA_AG_SCO_CLOSE_OP_ST;
break;
case BTA_AG_SCO_XFER_E:
/* save xfer scb */
p_sco->p_xfer_scb = p_scb;
p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* If not closing scb, just close it */
if (p_scb != p_sco->p_curr_scb)
{
/* remove listening connection */
bta_ag_remove_sco(p_scb, FALSE);
}
else
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* peer closed sco; create sco listen connection */
bta_ag_create_sco(p_scb, FALSE);
p_sco->state = BTA_AG_SCO_LISTEN_ST;
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSING_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_CLOSE_OP_ST:
switch (event)
{
case BTA_AG_SCO_CLOSE_E:
p_sco->state = BTA_AG_SCO_CLOSING_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
#if (BTM_WBS_INCLUDED == TRUE )
/* start codec negotiation */
p_sco->state = BTA_AG_SCO_CODEC_ST;
p_cn_scb = p_scb;
#else
/* open sco connection */
bta_ag_create_sco(p_scb, TRUE);
p_sco->state = BTA_AG_SCO_OPENING_ST;
#endif
break;
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection (Additional channel) */
if (p_scb != p_sco->p_curr_scb)
{
bta_ag_create_sco(p_scb, FALSE);
}
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSE_OP_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_CLOSE_XFER_ST:
switch (event)
{
case BTA_AG_SCO_CONN_OPEN_E:
/* close sco connection so headset can be transferred
Probably entered this state from "opening state" */
bta_ag_remove_sco(p_scb, TRUE);
break;
case BTA_AG_SCO_CLOSE_E:
/* clear xfer scb */
p_sco->p_xfer_scb = NULL;
p_sco->state = BTA_AG_SCO_CLOSING_ST;
break;
case BTA_AG_SCO_SHUTDOWN_E:
/* clear xfer scb */
p_sco->p_xfer_scb = NULL;
p_sco->state = BTA_AG_SCO_SHUTTING_ST;
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* closed sco; place old sco in listen mode,
take current sco out of listen, and
create originating sco for current */
bta_ag_create_sco(p_scb, FALSE);
bta_ag_remove_sco(p_sco->p_xfer_scb, FALSE);
#if (BTM_WBS_INCLUDED == TRUE )
/* start codec negotiation */
p_sco->state = BTA_AG_SCO_CODEC_ST;
p_cn_scb = p_sco->p_xfer_scb;
p_sco->p_xfer_scb = NULL;
#else
/* create sco connection to peer */
bta_ag_create_sco(p_sco->p_xfer_scb, TRUE);
p_sco->p_xfer_scb = NULL;
p_sco->state = BTA_AG_SCO_OPENING_ST;
#endif
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSE_XFER_ST: Ignoring event %d", event);
break;
}
break;
case BTA_AG_SCO_SHUTTING_ST:
switch (event)
{
case BTA_AG_SCO_CONN_OPEN_E:
/* close sco connection; wait for conn close event */
bta_ag_remove_sco(p_scb, TRUE);
break;
case BTA_AG_SCO_CONN_CLOSE_E:
/* If last SCO instance then finish shutting down */
if (!bta_ag_other_scb_open(p_scb))
{
p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
}
else /* Other instance is still listening */
{
p_sco->state = BTA_AG_SCO_LISTEN_ST;
}
if (p_scb == p_sco->p_curr_scb)
{
p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
p_sco->p_curr_scb = NULL;
}
break;
case BTA_AG_SCO_LISTEN_E:
/* create sco listen connection (Additional channel) */
if (p_scb != p_sco->p_curr_scb)
{
bta_ag_create_sco(p_scb, FALSE);
}
break;
case BTA_AG_SCO_SHUTDOWN_E:
if (!bta_ag_other_scb_open(p_scb))
{
p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
}
else /* Other instance is still listening */
{
p_sco->state = BTA_AG_SCO_LISTEN_ST;
}
if (p_scb == p_sco->p_curr_scb)
{
p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
p_sco->p_curr_scb = NULL;
}
break;
default:
APPL_TRACE_WARNING1("BTA_AG_SCO_SHUTTING_ST: Ignoring event %d", event);
break;
}
break;
default:
break;
}
#if BTA_AG_SCO_DEBUG == TRUE
if (p_sco->state != in_state)
{
APPL_TRACE_EVENT3("BTA AG SCO State Change: [%s] -> [%s] after Event [%s]",
bta_ag_sco_state_str(in_state),
bta_ag_sco_state_str(p_sco->state),
bta_ag_sco_evt_str(event));
}
#endif
#if (BTM_WBS_INCLUDED == TRUE )
if (p_cn_scb)
{
bta_ag_codec_negotiate(p_cn_scb);
}
#endif
}
/*******************************************************************************
**
** Function bta_ag_sco_is_open
**
** Description Check if sco is open for this scb.
**
**
** Returns TRUE if sco open for this scb, FALSE otherwise.
**
*******************************************************************************/
BOOLEAN bta_ag_sco_is_open(tBTA_AG_SCB *p_scb)
{
return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_ST) &&
(bta_ag_cb.sco.p_curr_scb == p_scb));
}
/*******************************************************************************
**
** Function bta_ag_sco_is_opening
**
** Description Check if sco is in Opening state.
**
**
** Returns TRUE if sco is in Opening state for this scb, FALSE otherwise.
**
*******************************************************************************/
BOOLEAN bta_ag_sco_is_opening(tBTA_AG_SCB *p_scb)
{
#if (BTM_WBS_INCLUDED == TRUE )
return (((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) ||
(bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST)) &&
(bta_ag_cb.sco.p_curr_scb == p_scb));
#else
return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) &&
(bta_ag_cb.sco.p_curr_scb == p_scb));
#endif
}
/*******************************************************************************
**
** Function bta_ag_sco_listen
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_listen(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
bta_ag_sco_event(p_scb, BTA_AG_SCO_LISTEN_E);
}
/*******************************************************************************
**
** Function bta_ag_sco_open
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
UINT8 event;
/* if another scb using sco, this is a transfer */
if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb != p_scb)
{
event = BTA_AG_SCO_XFER_E;
}
/* else it is an open */
else
{
event = BTA_AG_SCO_OPEN_E;
}
bta_ag_sco_event(p_scb, event);
}
/*******************************************************************************
**
** Function bta_ag_sco_close
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
/* if scb is in use */
#if (BTM_WBS_INCLUDED == TRUE )
/* sco_idx is not allocated in SCO_CODEC_ST, we still need to move to listening state. */
if ((p_scb->sco_idx != BTM_INVALID_SCO_INDEX) || (bta_ag_cb.sco.state == BTA_AG_SCO_CODEC_ST))
#else
if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
#endif
{
APPL_TRACE_DEBUG1("bta_ag_sco_close: sco_inx = %d", p_scb->sco_idx);
bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E);
}
}
#if (BTM_WBS_INCLUDED == TRUE )
/*******************************************************************************
**
** Function bta_ag_sco_codec_nego
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_codec_nego(tBTA_AG_SCB *p_scb, BOOLEAN result)
{
if(result == TRUE)
{
/* Subsequent sco connection will skip codec negotiation */
p_scb->codec_updated = FALSE;
bta_ag_sco_event(p_scb, BTA_AG_SCO_CN_DONE_E);
}
else /* codec negotiation failed */
bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E);
}
#endif
/*******************************************************************************
**
** Function bta_ag_sco_shutdown
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_shutdown(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
bta_ag_sco_event(p_scb, BTA_AG_SCO_SHUTDOWN_E);
}
/*******************************************************************************
**
** Function bta_ag_sco_conn_open
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_OPEN_E);
bta_sys_sco_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_ON);
#if (BTM_SCO_HCI_INCLUDED == TRUE )
/* open SCO codec if SCO is routed through transport */
bta_dm_sco_co_open(bta_ag_scb_to_idx(p_scb), BTA_SCO_OUT_PKT_SIZE, BTA_AG_CI_SCO_DATA_EVT);
#endif
/* call app callback */
bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_OPEN_EVT);
p_scb->retry_with_sco_only = FALSE;
}
/*******************************************************************************
**
** Function bta_ag_sco_conn_close
**
** Description
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_conn_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
UINT16 handle = bta_ag_scb_to_idx(p_scb);
/* clear current scb */
bta_ag_cb.sco.p_curr_scb = NULL;
p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
#if (BTM_WBS_INCLUDED == TRUE)
/* codec_fallback is set when AG is initiator and connection failed for mSBC. */
if (p_scb->codec_fallback && p_scb->svc_conn)
{
bta_ag_sco_event(p_scb, BTA_AG_SCO_REOPEN_E);
}
else if (p_scb->retry_with_sco_only && p_scb->svc_conn)
{
/* retry_with_sco_only is set when AG is initiator and connection failed for eSCO */
bta_ag_create_sco(p_scb, TRUE);
}
#else
/* retry_with_sco_only, will be set only when AG is initiator
** and AG is first trying to establish an eSCO connection */
if (p_scb->retry_with_sco_only && p_scb->svc_conn)
{
bta_ag_create_sco(p_scb, TRUE);
}
#endif
else
{
/* Indicate if the closing of audio is because of transfer */
if (bta_ag_cb.sco.p_xfer_scb)
bta_ag_co_audio_state(handle, p_scb->app_id, BTA_AG_CO_AUD_STATE_OFF_XFER);
else
bta_ag_co_audio_state(handle, p_scb->app_id, BTA_AG_CO_AUD_STATE_OFF);
bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_CLOSE_E);
bta_sys_sco_close(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
/* if av got suspended by this call, let it resume. */
/* In case call stays alive regardless of sco, av should not be affected. */
if(((p_scb->call_ind == BTA_AG_CALL_INACTIVE) && (p_scb->callsetup_ind == BTA_AG_CALLSETUP_NONE))
|| (p_scb->post_sco == BTA_AG_POST_SCO_CALL_END))
{
bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
}
/* call app callback */
bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT);
}
p_scb->retry_with_sco_only = FALSE;
}
/*******************************************************************************
**
** Function bta_ag_sco_conn_rsp
**
** Description Process the SCO connection request
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_sco_conn_rsp(tBTA_AG_SCB *p_scb, tBTM_ESCO_CONN_REQ_EVT_DATA *p_data)
{
tBTM_ESCO_PARAMS resp;
UINT8 hci_status = HCI_SUCCESS;
#if (BTM_SCO_HCI_INCLUDED == TRUE )
tBTA_CODEC_INFO codec_info = {BTA_SCO_CODEC_PCM};
UINT32 pcm_sample_rate;
#endif
if (bta_ag_cb.sco.state == BTA_AG_SCO_LISTEN_ST ||
bta_ag_cb.sco.state == BTA_AG_SCO_CLOSE_XFER_ST ||
bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_XFER_ST)
{
/* If script overrided sco parameter by BTA_CMD_SET_ESCO_PARAM */
if (bta_ag_cb.sco.param_updated)
{
resp = bta_ag_cb.sco.params;
}
else
{
resp.rx_bw = BTM_64KBITS_RATE;
resp.tx_bw = BTM_64KBITS_RATE;
resp.max_latency = 10;
resp.voice_contfmt = 0x60;
resp.retrans_effort = BTM_ESCO_RETRANS_POWER;
if (p_data->link_type == BTM_LINK_TYPE_SCO)
{
resp.packet_types = (BTM_SCO_LINK_ONLY_MASK |
BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 |
BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 |
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
}
else /* Allow controller to use all types available except 5-slot EDR */
{
resp.packet_types = (BTM_SCO_LINK_ALL_PKT_MASK |
BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
}
}
/* tell sys to stop av if any */
bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
/* Allow any platform specific pre-SCO set up to take place */
bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_SETUP);
#if (BTM_WBS_INCLUDED == TRUE )
/* When HS initiated SCO, it cannot be WBS. */
BTM_ConfigI2SPCM (BTM_SCO_CODEC_CVSD, (UINT8)HCI_BRCM_I2SPCM_IS_DEFAULT_ROLE, (UINT8)HCI_BRCM_I2SPCM_SAMPLE_DEFAULT, (UINT8)HCI_BRCM_I2SPCM_CLOCK_DEFAULT);
#endif
#if (BTM_SCO_HCI_INCLUDED == TRUE )
pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K;
/* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */
BTM_ConfigScoPath(bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id),
bta_ag_sco_read_cback, NULL, TRUE);
#endif
}
else
hci_status = HCI_ERR_HOST_REJECT_DEVICE;
#if (BTM_WBS_INCLUDED == TRUE )
/* If SCO open was initiated from HS, it must be CVSD */
p_scb->inuse_codec = BTA_AG_CODEC_NONE;
#endif
BTM_EScoConnRsp(p_data->sco_inx, hci_status, &resp);
}
/*******************************************************************************
**
** Function bta_ag_ci_sco_data
**
** Description Process the SCO data ready callin event
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_ci_sco_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
{
#if (BTM_SCO_HCI_INCLUDED == TRUE )
bta_ag_sco_event(p_scb, BTA_AG_SCO_CI_DATA_E);
#endif
}
/*******************************************************************************
**
** Function bta_ag_set_esco_param
**
** Description Update esco parameters from script wrapper.
**
**
** Returns void
**
*******************************************************************************/
void bta_ag_set_esco_param(BOOLEAN set_reset, tBTM_ESCO_PARAMS *param)
{
if(set_reset == FALSE) /* reset the parameters to default */
{
bta_ag_cb.sco.param_updated = FALSE;
APPL_TRACE_DEBUG0("bta_ag_set_esco_param : Resetting ESCO parameters to default");
}
else
{
bta_ag_cb.sco.param_updated = TRUE;
bta_ag_cb.sco.params = *param;
APPL_TRACE_DEBUG0("bta_ag_set_esco_param : Setting ESCO parameters");
}
}
/*******************************************************************************
** Debugging functions
*******************************************************************************/
#if BTA_AG_SCO_DEBUG == TRUE
static char *bta_ag_sco_evt_str(UINT8 event)
{
switch (event)
{
case BTA_AG_SCO_LISTEN_E:
return "Listen Request";
case BTA_AG_SCO_OPEN_E:
return "Open Request";
case BTA_AG_SCO_XFER_E:
return "Transfer Request";
#if (BTM_WBS_INCLUDED == TRUE )
case BTA_AG_SCO_CN_DONE_E:
return "Codec Negotiation Done";
case BTA_AG_SCO_REOPEN_E:
return "Reopen Request";
#endif
case BTA_AG_SCO_CLOSE_E:
return "Close Request";
case BTA_AG_SCO_SHUTDOWN_E:
return "Shutdown Request";
case BTA_AG_SCO_CONN_OPEN_E:
return "Opened";
case BTA_AG_SCO_CONN_CLOSE_E:
return "Closed";
case BTA_AG_SCO_CI_DATA_E :
return "Sco Data";
default:
return "Unknown SCO Event";
}
}
static char *bta_ag_sco_state_str(UINT8 state)
{
switch (state)
{
case BTA_AG_SCO_SHUTDOWN_ST:
return "Shutdown";
case BTA_AG_SCO_LISTEN_ST:
return "Listening";
#if (BTM_WBS_INCLUDED == TRUE )
case BTA_AG_SCO_CODEC_ST:
return "Codec Negotiation";
#endif
case BTA_AG_SCO_OPENING_ST:
return "Opening";
case BTA_AG_SCO_OPEN_CL_ST:
return "Open while closing";
case BTA_AG_SCO_OPEN_XFER_ST:
return "Opening while Transferring";
case BTA_AG_SCO_OPEN_ST:
return "Open";
case BTA_AG_SCO_CLOSING_ST:
return "Closing";
case BTA_AG_SCO_CLOSE_OP_ST:
return "Close while Opening";
case BTA_AG_SCO_CLOSE_XFER_ST:
return "Close while Transferring";
case BTA_AG_SCO_SHUTTING_ST:
return "Shutting Down";
default:
return "Unknown SCO State";
}
}
#endif