blob: 6bb6bfbd4fb44e21fde914d5263b2e2d0cc2f23c [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*****************************************************************************
*
* Filename: btif_av.c
*
* Description: Bluedroid AV implementation
*
*****************************************************************************/
#include <hardware/bluetooth.h>
#include "hardware/bt_av.h"
#define LOG_TAG "BTIF_AV"
#include "btif_av.h"
#include "btif_util.h"
#include "btif_profile_queue.h"
#include "bta_api.h"
#include "btif_media.h"
#include "bta_av_api.h"
#include "gki.h"
#include "bd.h"
#include "btu.h"
/*****************************************************************************
** Constants & Macros
******************************************************************************/
#define BTIF_AV_SERVICE_NAME "Advanced Audio"
#define BTIF_TIMEOUT_AV_OPEN_ON_RC_SECS 2
typedef enum {
BTIF_AV_STATE_IDLE = 0x0,
BTIF_AV_STATE_OPENING,
BTIF_AV_STATE_OPENED,
BTIF_AV_STATE_STARTED,
BTIF_AV_STATE_CLOSING
} btif_av_state_t;
/* Should not need dedicated suspend state as actual actions are no
different than open state. Suspend flags are needed however to prevent
media task from trying to restart stream during remote suspend or while
we are in the process of a local suspend */
#define BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING 0x1
#define BTIF_AV_FLAG_REMOTE_SUSPEND 0x2
#define BTIF_AV_FLAG_PENDING_START 0x4
#define BTIF_AV_FLAG_PENDING_STOP 0x8
/*****************************************************************************
** Local type definitions
******************************************************************************/
typedef struct
{
tBTA_AV_HNDL bta_handle;
bt_bdaddr_t peer_bda;
btif_sm_handle_t sm_handle;
UINT8 flags;
} btif_av_cb_t;
/*****************************************************************************
** Static variables
******************************************************************************/
static btav_callbacks_t *bt_av_callbacks = NULL;
static btif_av_cb_t btif_av_cb;
static TIMER_LIST_ENT tle_av_open_on_rc;
/* both interface and media task needs to be ready to alloc incoming request */
#define CHECK_BTAV_INIT() if ((bt_av_callbacks == NULL) || (btif_av_cb.sm_handle == NULL))\
{\
BTIF_TRACE_WARNING1("%s: BTAV not initialized", __FUNCTION__);\
return BT_STATUS_NOT_READY;\
}\
else\
{\
BTIF_TRACE_EVENT1("%s", __FUNCTION__);\
}
/* Helper macro to avoid code duplication in the state machine handlers */
#define CHECK_RC_EVENT(e, d) \
case BTA_AV_RC_OPEN_EVT: \
case BTA_AV_RC_CLOSE_EVT: \
case BTA_AV_REMOTE_CMD_EVT: \
case BTA_AV_VENDOR_CMD_EVT: \
case BTA_AV_META_MSG_EVT: \
case BTA_AV_RC_FEAT_EVT: \
{ \
btif_rc_handler(e, d);\
}break; \
static BOOLEAN btif_av_state_idle_handler(btif_sm_event_t event, void *data);
static BOOLEAN btif_av_state_opening_handler(btif_sm_event_t event, void *data);
static BOOLEAN btif_av_state_opened_handler(btif_sm_event_t event, void *data);
static BOOLEAN btif_av_state_started_handler(btif_sm_event_t event, void *data);
static BOOLEAN btif_av_state_closing_handler(btif_sm_event_t event, void *data);
static const btif_sm_handler_t btif_av_state_handlers[] =
{
btif_av_state_idle_handler,
btif_av_state_opening_handler,
btif_av_state_opened_handler,
btif_av_state_started_handler,
btif_av_state_closing_handler
};
/*************************************************************************
** Extern functions
*************************************************************************/
extern void btif_rc_handler(tBTA_AV_EVT event, tBTA_AV *p_data);
extern BOOLEAN btif_rc_get_connected_peer(BD_ADDR peer_addr);
extern void btif_rc_check_handle_pending_play (BD_ADDR peer_addr, BOOLEAN bSendToApp);
/*****************************************************************************
** Local helper functions
******************************************************************************/
const char *dump_av_sm_state_name(btif_av_state_t state)
{
switch (state)
{
CASE_RETURN_STR(BTIF_AV_STATE_IDLE)
CASE_RETURN_STR(BTIF_AV_STATE_OPENING)
CASE_RETURN_STR(BTIF_AV_STATE_OPENED)
CASE_RETURN_STR(BTIF_AV_STATE_STARTED)
CASE_RETURN_STR(BTIF_AV_STATE_CLOSING)
default: return "UNKNOWN_STATE";
}
}
const char *dump_av_sm_event_name(btif_av_sm_event_t event)
{
switch((int)event)
{
CASE_RETURN_STR(BTA_AV_ENABLE_EVT)
CASE_RETURN_STR(BTA_AV_REGISTER_EVT)
CASE_RETURN_STR(BTA_AV_OPEN_EVT)
CASE_RETURN_STR(BTA_AV_CLOSE_EVT)
CASE_RETURN_STR(BTA_AV_START_EVT)
CASE_RETURN_STR(BTA_AV_STOP_EVT)
CASE_RETURN_STR(BTA_AV_PROTECT_REQ_EVT)
CASE_RETURN_STR(BTA_AV_PROTECT_RSP_EVT)
CASE_RETURN_STR(BTA_AV_RC_OPEN_EVT)
CASE_RETURN_STR(BTA_AV_RC_CLOSE_EVT)
CASE_RETURN_STR(BTA_AV_REMOTE_CMD_EVT)
CASE_RETURN_STR(BTA_AV_REMOTE_RSP_EVT)
CASE_RETURN_STR(BTA_AV_VENDOR_CMD_EVT)
CASE_RETURN_STR(BTA_AV_VENDOR_RSP_EVT)
CASE_RETURN_STR(BTA_AV_RECONFIG_EVT)
CASE_RETURN_STR(BTA_AV_SUSPEND_EVT)
CASE_RETURN_STR(BTA_AV_PENDING_EVT)
CASE_RETURN_STR(BTA_AV_META_MSG_EVT)
CASE_RETURN_STR(BTA_AV_REJECT_EVT)
CASE_RETURN_STR(BTA_AV_RC_FEAT_EVT)
CASE_RETURN_STR(BTIF_SM_ENTER_EVT)
CASE_RETURN_STR(BTIF_SM_EXIT_EVT)
CASE_RETURN_STR(BTIF_AV_CONNECT_REQ_EVT)
CASE_RETURN_STR(BTIF_AV_DISCONNECT_REQ_EVT)
CASE_RETURN_STR(BTIF_AV_START_STREAM_REQ_EVT)
CASE_RETURN_STR(BTIF_AV_STOP_STREAM_REQ_EVT)
CASE_RETURN_STR(BTIF_AV_SUSPEND_STREAM_REQ_EVT)
CASE_RETURN_STR(BTIF_AV_RECONFIGURE_REQ_EVT)
default: return "UNKNOWN_EVENT";
}
}
/****************************************************************************
** Local helper functions
*****************************************************************************/
/*******************************************************************************
**
** Function btif_initiate_av_open_tmr_hdlr
**
** Description Timer to trigger AV open if the remote headset establishes
** RC connection w/o AV connection. The timer is needed to IOP
** with headsets that do establish AV after RC connection.
**
** Returns void
**
*******************************************************************************/
static void btif_initiate_av_open_tmr_hdlr(TIMER_LIST_ENT *tle)
{
BD_ADDR peer_addr;
/* is there at least one RC connection - There should be */
if (btif_rc_get_connected_peer(peer_addr)) {
BTIF_TRACE_DEBUG1("%s Issuing connect to the remote RC peer", __FUNCTION__);
btif_sm_dispatch(btif_av_cb.sm_handle, BTIF_AV_CONNECT_REQ_EVT, (void*)&peer_addr);
}
else
{
BTIF_TRACE_ERROR1("%s No connected RC peers", __FUNCTION__);
}
}
/*****************************************************************************
** Static functions
******************************************************************************/
/*****************************************************************************
**
** Function btif_av_state_idle_handler
**
** Description State managing disconnected AV link
**
** Returns TRUE if event was processed, FALSE otherwise
**
*******************************************************************************/
static BOOLEAN btif_av_state_idle_handler(btif_sm_event_t event, void *p_data)
{
BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
dump_av_sm_event_name(event), btif_av_cb.flags);
switch (event)
{
case BTIF_SM_ENTER_EVT:
/* clear the peer_bda */
memset(&btif_av_cb.peer_bda, 0, sizeof(bt_bdaddr_t));
btif_av_cb.flags = 0;
btif_a2dp_on_idle();
break;
case BTIF_SM_EXIT_EVT:
break;
case BTA_AV_ENABLE_EVT:
break;
case BTA_AV_REGISTER_EVT:
btif_av_cb.bta_handle = ((tBTA_AV*)p_data)->registr.hndl;
break;
case BTA_AV_PENDING_EVT:
case BTIF_AV_CONNECT_REQ_EVT:
{
if (event == BTIF_AV_CONNECT_REQ_EVT)
{
memcpy(&btif_av_cb.peer_bda, (bt_bdaddr_t*)p_data, sizeof(bt_bdaddr_t));
}
else if (event == BTA_AV_PENDING_EVT)
{
bdcpy(btif_av_cb.peer_bda.address, ((tBTA_AV*)p_data)->pend.bd_addr);
}
BTA_AvOpen(btif_av_cb.peer_bda.address, btif_av_cb.bta_handle,
TRUE, BTA_SEC_NONE);
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENING);
} break;
case BTA_AV_RC_OPEN_EVT:
/* IOP_FIX: Jabra 620 only does RC open without AV open whenever it connects. So
* as per the AV WP, an AVRC connection cannot exist without an AV connection. Therefore,
* we initiate an AV connection if an RC_OPEN_EVT is received when we are in AV_CLOSED state.
* We initiate the AV connection after a small 3s timeout to avoid any collisions from the
* headsets, as some headsets initiate the AVRC connection first and then
* immediately initiate the AV connection
*
* TODO: We may need to do this only on an AVRCP Play. FixMe
*/
BTIF_TRACE_DEBUG0("BTA_AV_RC_OPEN_EVT received w/o AV");
memset(&tle_av_open_on_rc, 0, sizeof(tle_av_open_on_rc));
tle_av_open_on_rc.param = (UINT32)btif_initiate_av_open_tmr_hdlr;
btu_start_timer(&tle_av_open_on_rc, BTU_TTYPE_USER_FUNC,
BTIF_TIMEOUT_AV_OPEN_ON_RC_SECS);
btif_rc_handler(event, p_data);
break;
case BTA_AV_REMOTE_CMD_EVT:
case BTA_AV_VENDOR_CMD_EVT:
case BTA_AV_META_MSG_EVT:
case BTA_AV_RC_FEAT_EVT:
btif_rc_handler(event, (tBTA_AV*)p_data);
break;
case BTA_AV_RC_CLOSE_EVT:
if (tle_av_open_on_rc.in_use) {
BTIF_TRACE_DEBUG0("BTA_AV_RC_CLOSE_EVT: Stopping AV timer.");
btu_stop_timer(&tle_av_open_on_rc);
}
btif_rc_handler(event, p_data);
break;
default:
BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
dump_av_sm_event_name(event));
return FALSE;
}
return TRUE;
}
/*****************************************************************************
**
** Function btif_av_state_opening_handler
**
** Description Intermediate state managing events during establishment
** of avdtp channel
**
** Returns TRUE if event was processed, FALSE otherwise
**
*******************************************************************************/
static BOOLEAN btif_av_state_opening_handler(btif_sm_event_t event, void *p_data)
{
BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
dump_av_sm_event_name(event), btif_av_cb.flags);
switch (event)
{
case BTIF_SM_ENTER_EVT:
/* inform the application that we are entering connecting state */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_CONNECTING, &(btif_av_cb.peer_bda));
break;
case BTIF_SM_EXIT_EVT:
break;
case BTA_AV_OPEN_EVT:
{
tBTA_AV *p_bta_data = (tBTA_AV*)p_data;
btav_connection_state_t state;
btif_sm_state_t av_state;
BTIF_TRACE_DEBUG1("status:%d", p_bta_data->open.status);
if (p_bta_data->open.status == BTA_AV_SUCCESS)
{
state = BTAV_CONNECTION_STATE_CONNECTED;
av_state = BTIF_AV_STATE_OPENED;
}
else
{
BTIF_TRACE_WARNING1("BTA_AV_OPEN_EVT::FAILED status: %d",
p_bta_data->open.status );
state = BTAV_CONNECTION_STATE_DISCONNECTED;
av_state = BTIF_AV_STATE_IDLE;
}
/* inform the application of the event */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
state, &(btif_av_cb.peer_bda));
/* change state to open/idle based on the status */
btif_sm_change_state(btif_av_cb.sm_handle, av_state);
/* if queued PLAY command, send it now */
btif_rc_check_handle_pending_play(p_bta_data->open.bd_addr,
(p_bta_data->open.status == BTA_AV_SUCCESS));
btif_queue_advance();
} break;
CHECK_RC_EVENT(event, p_data);
default:
BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
dump_av_sm_event_name(event));
return FALSE;
}
return TRUE;
}
/*****************************************************************************
**
** Function btif_av_state_closing_handler
**
** Description Intermediate state managing events during closing
** of avdtp channel
**
** Returns TRUE if event was processed, FALSE otherwise
**
*******************************************************************************/
static BOOLEAN btif_av_state_closing_handler(btif_sm_event_t event, void *p_data)
{
BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
dump_av_sm_event_name(event), btif_av_cb.flags);
switch (event)
{
case BTIF_SM_ENTER_EVT:
/* immediately stop transmission of frames */
btif_a2dp_set_tx_flush(TRUE);
/* wait for audioflinger to stop a2dp */
break;
case BTA_AV_STOP_EVT:
case BTIF_AV_STOP_STREAM_REQ_EVT:
/* immediately flush any pending tx frames while suspend is pending */
btif_a2dp_set_tx_flush(TRUE);
btif_a2dp_on_stopped(NULL);
break;
case BTIF_SM_EXIT_EVT:
break;
case BTA_AV_CLOSE_EVT:
/* inform the application that we are disconnecting */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
break;
/* Handle the RC_CLOSE event for the cleanup */
case BTA_AV_RC_CLOSE_EVT:
btif_rc_handler(event, (tBTA_AV*)p_data);
break;
default:
BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
dump_av_sm_event_name(event));
return FALSE;
}
return TRUE;
}
/*****************************************************************************
**
** Function btif_av_state_opened_handler
**
** Description Handles AV events while AVDTP is in OPEN state
**
** Returns TRUE if event was processed, FALSE otherwise
**
*******************************************************************************/
static BOOLEAN btif_av_state_opened_handler(btif_sm_event_t event, void *p_data)
{
tBTA_AV *p_av = (tBTA_AV*)p_data;
BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
dump_av_sm_event_name(event), btif_av_cb.flags);
if ( (event == BTA_AV_REMOTE_CMD_EVT) && (btif_av_cb.flags & BTIF_AV_FLAG_REMOTE_SUSPEND) &&
(p_av->remote_cmd.rc_id == BTA_AV_RC_PLAY) )
{
BTIF_TRACE_EVENT1("%s: Resetting remote suspend flag on RC PLAY", __FUNCTION__);
btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
}
switch (event)
{
case BTIF_SM_ENTER_EVT:
btif_av_cb.flags &= ~BTIF_AV_FLAG_PENDING_STOP;
btif_av_cb.flags &= ~BTIF_AV_FLAG_PENDING_START;
btif_media_check_iop_exceptions(btif_av_cb.peer_bda.address);
break;
case BTIF_SM_EXIT_EVT:
btif_av_cb.flags &= ~BTIF_AV_FLAG_PENDING_START;
break;
case BTIF_AV_START_STREAM_REQ_EVT:
btif_a2dp_setup_codec();
BTA_AvStart();
btif_av_cb.flags |= BTIF_AV_FLAG_PENDING_START;
break;
case BTA_AV_START_EVT:
{
BTIF_TRACE_EVENT3("BTA_AV_START_EVT status %d, suspending %d, init %d",
p_av->start.status, p_av->start.suspending, p_av->start.initiator);
if ((p_av->start.status == BTA_SUCCESS) && (p_av->start.suspending == TRUE))
return TRUE;
btif_av_cb.flags &= ~BTIF_AV_FLAG_PENDING_START;
btif_a2dp_on_started(&p_av->start);
/* remain in open state if status failed */
if (p_av->start.status != BTA_AV_SUCCESS)
return FALSE;
/* change state to started */
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_STARTED);
} break;
case BTIF_AV_DISCONNECT_REQ_EVT:
BTA_AvClose(btif_av_cb.bta_handle);
/* inform the application that we are disconnecting */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_DISCONNECTING, &(btif_av_cb.peer_bda));
break;
case BTA_AV_CLOSE_EVT:
/* avdtp link is closed */
btif_a2dp_on_stopped(NULL);
/* inform the application that we are disconnected */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
break;
case BTA_AV_RECONFIG_EVT:
if((btif_av_cb.flags & BTIF_AV_FLAG_PENDING_START) &&
(p_av->reconfig.status == BTA_AV_SUCCESS))
{
APPL_TRACE_WARNING0("reconfig done BTA_AVstart()");
BTA_AvStart();
}
else if(btif_av_cb.flags & BTIF_AV_FLAG_PENDING_START)
{
btif_av_cb.flags &= ~BTIF_AV_FLAG_PENDING_START;
btif_a2dp_ack_fail();
}
break;
CHECK_RC_EVENT(event, p_data);
default:
BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
dump_av_sm_event_name(event));
return FALSE;
}
return TRUE;
}
/*****************************************************************************
**
** Function btif_av_state_started_handler
**
** Description Handles AV events while A2DP stream is started
**
** Returns TRUE if event was processed, FALSE otherwise
**
*******************************************************************************/
static BOOLEAN btif_av_state_started_handler(btif_sm_event_t event, void *p_data)
{
tBTA_AV *p_av = (tBTA_AV*)p_data;
BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
dump_av_sm_event_name(event), btif_av_cb.flags);
switch (event)
{
case BTIF_SM_ENTER_EVT:
/* we are again in started state, clear any remote suspend flags */
btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
HAL_CBACK(bt_av_callbacks, audio_state_cb,
BTAV_AUDIO_STATE_STARTED, &(btif_av_cb.peer_bda));
break;
case BTIF_SM_EXIT_EVT:
break;
case BTIF_AV_START_STREAM_REQ_EVT:
/* we were remotely started, just ack back the local request */
btif_a2dp_on_started(NULL);
break;
/* fixme -- use suspend = true always to work around issue with BTA AV */
case BTIF_AV_STOP_STREAM_REQ_EVT:
case BTIF_AV_SUSPEND_STREAM_REQ_EVT:
/* set pending flag to ensure btif task is not trying to restart
stream while suspend is in progress */
btif_av_cb.flags |= BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
/* if we were remotely suspended but suspend locally, local suspend
always overrides */
btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
/* immediately stop transmission of frames while suspend is pending */
btif_a2dp_set_tx_flush(TRUE);
BTA_AvStop(TRUE);
break;
case BTIF_AV_DISCONNECT_REQ_EVT:
/* request avdtp to close */
BTA_AvClose(btif_av_cb.bta_handle);
/* inform the application that we are disconnecting */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_DISCONNECTING, &(btif_av_cb.peer_bda));
/* wait in closing state until fully closed */
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_CLOSING);
break;
case BTA_AV_SUSPEND_EVT:
BTIF_TRACE_EVENT2("BTA_AV_SUSPEND_EVT status %d, init %d",
p_av->suspend.status, p_av->suspend.initiator);
/* a2dp suspended, stop media task until resumed */
btif_a2dp_on_suspended(&p_av->suspend);
/* if not successful, remain in current state */
if (p_av->suspend.status != BTA_AV_SUCCESS)
{
btif_av_cb.flags &= ~BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
/* suspend failed, reset back tx flush state */
btif_a2dp_set_tx_flush(FALSE);
return FALSE;
}
if (p_av->suspend.initiator != TRUE)
{
/* remote suspend, notify HAL and await audioflinger to
suspend/stop stream */
/* set remote suspend flag to block media task from restarting
stream only if we did not already initiate a local suspend */
if ((btif_av_cb.flags & BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING) == 0)
btif_av_cb.flags |= BTIF_AV_FLAG_REMOTE_SUSPEND;
HAL_CBACK(bt_av_callbacks, audio_state_cb,
BTAV_AUDIO_STATE_REMOTE_SUSPEND, &(btif_av_cb.peer_bda));
}
else
{
HAL_CBACK(bt_av_callbacks, audio_state_cb,
BTAV_AUDIO_STATE_STOPPED, &(btif_av_cb.peer_bda));
}
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENED);
/* suspend completed and state changed, clear pending status */
btif_av_cb.flags &= ~BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
break;
case BTA_AV_STOP_EVT:
btif_av_cb.flags |= BTIF_AV_FLAG_PENDING_STOP;
btif_a2dp_on_stopped(&p_av->suspend);
HAL_CBACK(bt_av_callbacks, audio_state_cb,
BTAV_AUDIO_STATE_STOPPED, &(btif_av_cb.peer_bda));
/* if stop was successful, change state to open */
if (p_av->suspend.status == BTA_AV_SUCCESS)
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENED);
break;
case BTA_AV_CLOSE_EVT:
btif_av_cb.flags |= BTIF_AV_FLAG_PENDING_STOP;
/* avdtp link is closed */
btif_a2dp_on_stopped(NULL);
/* inform the application that we are disconnected */
HAL_CBACK(bt_av_callbacks, connection_state_cb,
BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
break;
CHECK_RC_EVENT(event, p_data);
default:
BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
dump_av_sm_event_name(event));
return FALSE;
}
return TRUE;
}
/*****************************************************************************
** Local event handlers
******************************************************************************/
static void btif_av_handle_event(UINT16 event, char* p_param)
{
btif_sm_dispatch(btif_av_cb.sm_handle, event, (void*)p_param);
}
static void bte_av_callback(tBTA_AV_EVT event, tBTA_AV *p_data)
{
/* Switch to BTIF context */
btif_transfer_context(btif_av_handle_event, event,
(char*)p_data, sizeof(tBTA_AV), NULL);
}
/*******************************************************************************
**
** Function btif_av_init
**
** Description Initializes btif AV if not already done
**
** Returns bt_status_t
**
*******************************************************************************/
bt_status_t btif_av_init(void)
{
if (btif_av_cb.sm_handle == NULL)
{
if (btif_a2dp_start_media_task() != GKI_SUCCESS)
return BT_STATUS_FAIL;
btif_enable_service(BTA_A2DP_SERVICE_ID);
/* Also initialize the AV state machine */
btif_av_cb.sm_handle = btif_sm_init((const btif_sm_handler_t*)btif_av_state_handlers, BTIF_AV_STATE_IDLE);
btif_a2dp_on_init();
return BT_STATUS_SUCCESS;
}
return BT_STATUS_DONE;
}
/*******************************************************************************
**
** Function init
**
** Description Initializes the AV interface
**
** Returns bt_status_t
**
*******************************************************************************/
static bt_status_t init(btav_callbacks_t* callbacks )
{
int status;
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
if (bt_av_callbacks)
return BT_STATUS_DONE;
bt_av_callbacks = callbacks;
btif_av_cb.sm_handle = NULL;
return btif_av_init();
}
/*******************************************************************************
**
** Function connect
**
** Description Establishes the AV signalling channel with the remote headset
**
** Returns bt_status_t
**
*******************************************************************************/
static bt_status_t connect_int(bt_bdaddr_t *bd_addr)
{
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
btif_sm_dispatch(btif_av_cb.sm_handle, BTIF_AV_CONNECT_REQ_EVT, (char*)bd_addr);
return BT_STATUS_SUCCESS;
}
static bt_status_t connect(bt_bdaddr_t *bd_addr)
{
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
CHECK_BTAV_INIT();
return btif_queue_connect(UUID_SERVCLASS_AUDIO_SOURCE, bd_addr, connect_int);
}
/*******************************************************************************
**
** Function disconnect
**
** Description Tears down the AV signalling channel with the remote headset
**
** Returns bt_status_t
**
*******************************************************************************/
static bt_status_t disconnect(bt_bdaddr_t *bd_addr)
{
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
CHECK_BTAV_INIT();
/* Switch to BTIF context */
return btif_transfer_context(btif_av_handle_event, BTIF_AV_DISCONNECT_REQ_EVT,
(char*)bd_addr, sizeof(bt_bdaddr_t), NULL);
}
/*******************************************************************************
**
** Function cleanup
**
** Description Shuts down the AV interface and does the cleanup
**
** Returns None
**
*******************************************************************************/
static void cleanup(void)
{
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
if (bt_av_callbacks)
{
btif_a2dp_stop_media_task();
btif_disable_service(BTA_A2DP_SERVICE_ID);
bt_av_callbacks = NULL;
/* Also shut down the AV state machine */
btif_sm_shutdown(btif_av_cb.sm_handle);
btif_av_cb.sm_handle = NULL;
}
return;
}
static const btav_interface_t bt_av_interface = {
sizeof(btav_interface_t),
init,
connect,
disconnect,
cleanup,
};
/*******************************************************************************
**
** Function btif_av_get_sm_handle
**
** Description Fetches current av SM handle
**
** Returns None
**
*******************************************************************************/
btif_sm_handle_t btif_av_get_sm_handle(void)
{
return btif_av_cb.sm_handle;
}
/*******************************************************************************
**
** Function btif_av_stream_ready
**
** Description Checks whether AV is ready for starting a stream
**
** Returns None
**
*******************************************************************************/
BOOLEAN btif_av_stream_ready(void)
{
btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
BTIF_TRACE_DEBUG3("btif_av_stream_ready : sm hdl %d, state %d, flags %x",
btif_av_cb.sm_handle, state, btif_av_cb.flags);
/* also make sure main adapter is enabled */
if (btif_is_enabled() == 0)
{
BTIF_TRACE_EVENT0("main adapter not enabled");
return FALSE;
}
/* check if we are remotely suspended or stop is pending */
if (btif_av_cb.flags & (BTIF_AV_FLAG_REMOTE_SUSPEND|BTIF_AV_FLAG_PENDING_STOP))
return FALSE;
return (state == BTIF_AV_STATE_OPENED);
}
/*******************************************************************************
**
** Function btif_av_stream_started_ready
**
** Description Checks whether AV ready for media start in streaming state
**
** Returns None
**
*******************************************************************************/
BOOLEAN btif_av_stream_started_ready(void)
{
btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
BTIF_TRACE_DEBUG3("btif_av_stream_started : sm hdl %d, state %d, flags %x",
btif_av_cb.sm_handle, state, btif_av_cb.flags);
/* disallow media task to start if we have pending actions */
if (btif_av_cb.flags & (BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING | BTIF_AV_FLAG_REMOTE_SUSPEND
| BTIF_AV_FLAG_PENDING_STOP))
return FALSE;
return (state == BTIF_AV_STATE_STARTED);
}
/*******************************************************************************
**
** Function btif_dispatch_sm_event
**
** Description Send event to AV statemachine
**
** Returns None
**
*******************************************************************************/
/* used to pass events to AV statemachine from other tasks */
void btif_dispatch_sm_event(btif_av_sm_event_t event, void *p_data, int len)
{
/* Switch to BTIF context */
btif_transfer_context(btif_av_handle_event, event,
(char*)p_data, len, NULL);
}
/*******************************************************************************
**
** Function btif_av_execute_service
**
** Description Initializes/Shuts down the service
**
** Returns BT_STATUS_SUCCESS on success, BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_av_execute_service(BOOLEAN b_enable)
{
if (b_enable)
{
/* TODO: Removed BTA_SEC_AUTHORIZE since the Java/App does not
* handle this request in order to allow incoming connections to succeed.
* We need to put this back once support for this is added */
/* Added BTA_AV_FEAT_NO_SCO_SSPD - this ensures that the BTA does not
* auto-suspend av streaming on AG events(SCO or Call). The suspend shall
* be initiated by the app/audioflinger layers */
#if (AVRC_METADATA_INCLUDED == TRUE)
BTA_AvEnable(BTA_SEC_AUTHENTICATE,
BTA_AV_FEAT_RCTG|BTA_AV_FEAT_METADATA|BTA_AV_FEAT_VENDOR|BTA_AV_FEAT_NO_SCO_SSPD,
bte_av_callback);
#else
BTA_AvEnable(BTA_SEC_AUTHENTICATE, (BTA_AV_FEAT_RCTG | BTA_AV_FEAT_NO_SCO_SSPD),
bte_av_callback);
#endif
BTA_AvRegister(BTA_AV_CHNL_AUDIO, BTIF_AV_SERVICE_NAME, 0);
}
else {
BTA_AvDeregister(btif_av_cb.bta_handle);
BTA_AvDisable();
}
return BT_STATUS_SUCCESS;
}
/*******************************************************************************
**
** Function btif_av_get_interface
**
** Description Get the AV callback interface
**
** Returns btav_interface_t
**
*******************************************************************************/
const btav_interface_t *btif_av_get_interface(void)
{
BTIF_TRACE_EVENT1("%s", __FUNCTION__);
return &bt_av_interface;
}
/*******************************************************************************
**
** Function btif_av_is_connected
**
** Description Checks if av has a connected sink
**
** Returns BOOLEAN
**
*******************************************************************************/
BOOLEAN btif_av_is_connected(void)
{
btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
return ((state == BTIF_AV_STATE_OPENED) || (state == BTIF_AV_STATE_STARTED));
}